to the User Manual
Contents
1. 1 repetition Reset Button Resets all values to zero If treatment is in progress then this will stop treatment Goal Button During setup press this button to set the number of repetitions the patient must perform Sound Button Switches the internal buzzer of the IsoMotivator on or off Error LED If the patient fails to complete an action in the allotted amount of time then the Error LED will light Page 5 of 7 V2 3 Back Panel 1 Switch 1 Plug a Switch on Stand in here Best practice turn the machine off before plugging switches in out 2 Switch 2 Plug a Switch on Stand in here If only one switch 19 being used then this may be left un used Best practice turn the machine off before plugging switches in out 3 On Off Switch Switch the IsoMotivator on and off here If an appliance plugged into 5 draws too much current such as in a short circuit then this switch will trip and need to be reset 4 Mains Input This is the power supply connector for the IsoMotivator Plug the Power Cord in here 5 Switched Output Plug the appliance that the patient will be interested in into this output This plug has it s own on off switch so be sure that it is in the on position during treatment This plug is normally on during setup after treatment and only switches off during an error condition Page 6 of 7 V2 3 Operation l oF Plug the appliance the patient will be using in2. Work Button Display software version Page 7 of 7 V2 3
3. he LED will light If no value has been set zero time then switch 2 will not be used during treatment This value also determines the amount of time the patient has to release the switch once the work period 19 over During treatment the LED will light when the patient should activate switch 2 If the Dual Switch 2 LEDs setting 1s on see Start up Settings Information Displays section for more information then the Activate 1 LED will light as well this can make it easier for the patient to see whether switch 1 or switch 2 should be activated Work Button and LED During setup press this button to set the amount of time for which the patient has to hold the appropriate switch in an activated state If a value has been set then the LED will light During treatment the LED will light when the patient should hold the appropriate switch in an activated state Rest Button and LED During setup press this button to set the amount of time the patient must rest after holding a switch in the activated state During treatment the LED will light when the patient should rest Page 4 of 7 V2 3 1 min Button Increments time by 1 minute each time pressed or in the case of the goal setting by 100 repetitions 10 sec Button Increments time by 10 seconds each time pressed or in the case of the goal setting by 10 repetitions 1 sec Button Increments time by 1 second each time pressed or in the case of the goal setting by
4. lsoMotivator Operating Instructions Contents s en en ce le tin 3 PONCE EE 4 Acivale Ut BU Ori ai LED EL cd ui 4 ACuvale 2 PUUON Ad LED ett danas tua eae Scie ete iene aera alee id occ ttt 4 Work butionand LE WEE 4 Rest Button and H ECH KSE 4 rte BUO TTT 5 LOr Sl O secede a gh seis tel ates ncale ctac oases A atthe A 5 lecc COM E 5 FR SSS RE 5 CO DORE a 5 Sound DGS sik ER de let amd E all MN 5 PREF Dee tea vats essen secu oswaaeesoeas eta aiscteuasoid osussanene 5 Baek EE 6 SAC RS SE Se eh otk Bilas 6 Dr CE BEE 6 SS ADI OE EE 6 EN E ET tn ee A ra An 6 STR MONO KE M td M et ne 6 KTTO A E 7 Start up Settings Information Displays ss 7 Page 2 of 7 V2 3 Parts 2 X Switch on Stand Optional Optical Switch on Stand 1 X Control Unit Page 3 of 7 1 X Power Cable V2 3 Front Panel ACTIVATE RESET ACTIVATE WORK ERROR Activate 1 Button and LED During setup press this button to set the amount of time the patient has to activate switch 1 If a value has been set then the LED will light This value also determines the amount of time the patient has to release the switch once the work period is over During treatment the LED will light when the patient should activate switch 1 Activate 2 Button and LED During setup press this button to set the amount of time the patient has to activate switch 2 If a value has been set then t
5. to the back of the IsoMotivator Plug at least one switch into the back of the IsoMotivator Plug the power cord into the wall and into the back of the unit and switch the unit on Set the desired treatment parameters Please see the Front Panel section for more information Once enough parameters have been specified instruct the patient to activate switch 1 As soon as switch is released treatment will commence Make sure that the switch on the Switched Output plug is on This switch may be turned off during setup if desired Either one or two switches may be used If only one is used then be sure to plug it into the Switch 1 connector If the patient will be walking and pressing the switches with their hands then it may be advisable to place the switches on an elevated surface Keep the switch cables out of the way of the patient especially to prevent the patient from tripping over them Besides for posing an injury threat to the patient this could damage both the control unit and the switches If necessary then tape the cables down It is best practice to turn the machine off before plugging switches in or out Start up Settings Information Displays A number of settings information displays are available by holding down certain buttons when powering the unit on Hold Activate 1 Button Toggle Dual Switch 2 LEDs setting on off see Activate 2 Button and LED section for more information Hold
Download Pdf Manuals
Related Search