User Manual
Contents
1. 100 5 Strobe slowtofast_ 6 Internal programme select 160 470UK 160 471UK User Manual UZ qtx Specifications Fuse PA 10mm high output DMX Channels MNA 7 O Dimensions 50X230K 360MM Weigt Pg O Troubleshooting Power on off switch will not light Power switch lit but no flame light Check that DMX control is not dimmed or blackout Disposal B Please dispose of the unserviceable device according to the current statutory requirements Errors and omissions excepted Copyright 2013 AVSL Goup Ltd 160 470UK 160 471UK User Manual2. E qtx QTFX F1 QTFX F2 Item ref 160 470UK 160 471UK FLAME EFFECT eer Manta LA 08 0 Oo 0 Version 2 1 www avsl qtx com a an group brand UZ qtx Introduction Really heat up your party with this mesmerising flame effect Reaching up to a height of 1 5m the silk flame flutters in the air whilst lit up with a combination of 10mm LEDs giving the appearance of a hot flame Offering low maintenance and quick set up it is perfect for event and hire companies or aS a permanent fixture on stage Reaches up to a height of 1 5m Red and blue 10mm LED QTFX F1 RGB Colour mixing QTFX F2 High speed fans Replacement silk flames available Ref 160 472UK Caution Always plug in the power plug last and disconnect from the mains when the device is not in use or before cleaning Do not install the device in extreme heat moisture or dusty environments Ensure that the unit has reached room temperature before switching on power Avoid heavy vibration or impact to the housing Do not use solvents or aggressive detergent to clean the device Do not modify the device or the supplied mains lead This product must be earthed Please follow the wiring shown below Brown Live L Blue Neutral N Yellow Cyan Earth Ground Replacing the fuse Disconnect from the main power supply first then remove the fuse holder above the IEC Socket to reveal the fuse Replace the correct fuse r
3. ating as stated on lighting or user guide Then lock the fuse holder cover back into place General maintenance To maintain optimum performance and minimize wear the item should be cleaned frequently to avoid dust build up and blockages which can result in poor performance or damage Be sure to power off fixture before any maintenance Unplug fixture from power Use a vacuum or air compressor and a soft brush to remove dust collected on external vents and internal components Clean the external case when the fixture is cold with a dry cloth or tissue 160 470UK 160 471UK User Manual E qtx Package Contents Please check to ensure that the product has been received in good condition e QTFX Flame Effect e User Manual e Power Cord If you find any accessory is missing or the machine has arrived with any problems please contact your dealer at once Do not try to fix this item yourself or you will lose the warranty Please keep the original packaging and invoice for any possible replacement or returned demand Setup 1 Unpack the Flame machine and position in a secure location where it will not be tampered with 2 Unwrap the silk flame and place into the slot between the LEDs 3 Plug in the supplied IEC power lead 4 Turn the power switch on and the LEDs will light up fans will start to blow and the silk flame will start to rise Installation Advice The fixture may be placed anywhere on a stage or in a display provided t
4. hat there is no obstruction in front of the machine fan or vents Never install in places where the fixture will be exposed to rain high humidity extreme temperature changes or restricted ventilation Avoid positioning the unit where it may be tampered with or damaged 160 470UK 160 471UK User Manual UZ qtx Panel Layout oie ee l 1 2 3 4 5 LED display and control panel QTFX F2 only DMX input XLRM QTFX F2 only DMX output XLRF QTFX F2 only Power on off IEC mains inlet and fuse 160 470UK 160 471UK User Manual E qtx Operation For QTFX F1 operation is simply via the power on off switch to power up the high speed fans and flame coloured LEDs For QTFX F2 the LEDs are multi coloured for more dynamic and unusual effects The colour and brightness of these LEDs are controllable either stand alone or via DMX512 with additional access to internal programmes for sequenced colour effects Stand alone operation is programmable via the LED display and 4 button control panel Stand alone operation for QTFX F2 LED Display AOO1 A512 Set DMX Address AUt1 AUt7 Speed adjustment Remote DMX signal can be connected via the XLR connector on the side panel There is also a DMX output for cascading the DMX signal onto further units to be controlled DMX operation for QTFX F2 Daia E Ma l Red colour level 0 100 2 Green colour level 0 100 3 Blue colour level 0 100 4 Master dimmer 0
Download Pdf Manuals
Related Search