Home

User Manual for your BKG64SS 4 burner gas hob

image

Contents

1. o IMPORTANT The adjacent furniture and all materials used in the installation must be able to withstand a minimum temperature of 85 C above the ambient temperature of the room it is located in whilst in use o Certain types of vinyl or laminate kitchen furniture are particularly prone to heat damage or discolouration at temperatures below the guidelines given above o Any damage caused by the appliance being installed in contravention of this temperature limit will be the liability of the owner o Your new appliance is guaranteed against electrical or mechanical defects subject to certain exclusions that are noted in the Conditions Of Guarantee The foregoing does not affect your statutory rights o The use of this appliance for any other purpose or in any other environment without the express agreement of the manufacturer will invalidate any warranty or liability claim o You should not use this appliance to store items on or as a work Surface o No modifications to the appliance are permitted by us o You should not store or place flammable or highly flammable liquids materials on top of or near the appliance Items made from aluminium plastic or plastic film should also be kept away from the appliance as they may fuse to the surface o Repairs may only be carried out by an Authorised Service Agent Log onto www applico co nz to locate a Service Agent nearest to you Child Safety o We strongly recommend that babi
2. Small flame minimum setting o The minimum setting is at the end of the anti clockwise rotation of the control knob o All operation positions must be selected between the maximum and minimum position o Never select a knob position between the maximum and off position o The symbol on the control panel next to the control knob will indicate which gas burner it operates Pushbutton ignition o Press in and turn the appropriate control knob anti clockwise to the large flame symbol o Whilst pressing in the control knob press and hold down the ignition button which is located on the control panel o The ignition spark will operate you should hold down the ignition button until the flame on the burner has lit o To regulate the flame you should continue turning the control knob anti clockwise until the flame is at a suitable level The operating position MUST be at a position between the maximum and minimum position o To switch the burner off turn the control knob fully clockwise to the gas off position o Incase of power failure the burners can be lit by carefully using a match Energy saving tips BURNERS Rapid 180 mm 220 mm 200 mm 160 mm o The diameter of the bottom of the pan should correspond to that of the burner o The burner flame must never extend beyond the diametre of the pan o Use flat bottomed pans only o When possible keep a lid on the pan whilst cooking o Cook vegetabl
3. against the aperture This will make it difficult to remove the hob from the aperture in future if it needs to be serviced A SEALING STRIP A Sealing strip B Clamp C Screw o Place the clamp B over the holes that match the size of the screws There are one set of screw holes in each corner of the hob Slightly tighten a screw C through the clamp B so that the clamp is attached to the hob but so that you can still adjust the position of it o Carefully turn the hob back over and then gently lower it into the aperture hole that you have cut out o On the underneath of the hob adjust the clamps into a position that is suitable for your worktop Then fully tighten the screws C to secure the hob into position Gas connection This appliance must be installed by a competent person in accordance with the current versions of the following o AS NZS 3000 2007 Wiring Regulations o 2010 Electricity Safety Regulations Important information o This hob is supplied to run on natural gas only and cannot be used on any other type of gas without modification 15 O O Conversion for use on LPG and other gases must only be undertaken by a qualified person For information on the use of other gases please contact an Authorised Service Agent The hob must be installed by a qualified person in accordance with the current edition of the Gas Safety Installation and Use Amendment Regulations and the relevant
4. ND ONLY Note Please complete the following details when you unpack the product and return the bottom portion of this card to Applico Ltd Private Bag 92 900 Onehunga Auckland New Zealand Warranty These products are covered by a warranty for a period of 24 months from the date of purchase subject to the following conditions The Warranty covers rectification free of charge of any fault arising from defective materials or components or faulty workmanship or assembly The conditions above mentioned are 1 that the purchaser carefully follows all instructions packed with the product bd that the purchaser carefully follows the installation instructions provided and complies with electrical wiring regulations gas and or plumbing codes 3 that the purchaser carefully follows instructions provided in the owner s handbook relating to the proper use and care of the product and does not use the product for any purpose other than the domestic use for which it has been designed 4 all appliances being used in a non residential commercial situation are covered by a 3 month warranty from the original date of purchase 5 that the product was purchased and installed in New Zealand 6 that this warranty does not extend to a optional glass lids for hobs apart from claims which relate to mechanical or physical damage thereof at the date of purchase b hght bulbs c damage to ceramic glass caused by liquid o
5. User Manual for your BKG64SS 4 burner gas hob NOTE This User Instruction Manual contains important information including safety amp installation points which will enable you to get the most out of your appliance Please keep it in a Safe place so that it is easily available for future reference for you or any person not familiar with the operation of the appliance GS 16 12 10 Contents Environmental note Important safety information Specifications Dimensions Specifications Standard accessories Electrical details Gas details Gas hob surface layout Using the gas hob Before first use Switching the hob on Pushbutton ignition Energy saving tips Cleaning Cleaning the hob top After each use Cleaning the hob burners Installation Positioning Unpacking the appliance Installing the appliance Gas connection Ventilation requirements Gas Safety Installation and Use Regulations Gas Adjustment Conversion to LPG Minimum flow adjustment for hob gas taps Gas tap maintenance Electrical connection Replacing the mains supply cable My appliance isn t working correctly Warranty card 3 4 6 7 8 7 7 7 7 8 8 9 10 9 9 9 10 10 11 12 11 11 11 12 12 21 12 13 13 14 15 15 16 16 17 17 18 19 19 20 21 21 21 22 23 24 Environmental note This appliance is marked according to the European directive 2002 96 EC on Waste electrical and Electronic Equipmen
6. building E E Regulations Failure to install the appliance correctly could invalidate your guarantee and lead to prosecution under the regulations quoted above Ventilation requirements O The room containing the hob should have an air supply in accordance with the current edition of BS 5440 Part 2 The room must have opening windows or equivalent some rooms may also require a permanent vent If the room has a volume between 5 and 10m it will require an air vent of 50cm effective area Unless it has a door which opens directly to the outside If the room has a volume of less than 5m it will require an air vent of 100cm effective area If itis installed in a room with a volume that exceeds 11m then no air vent is required If there are any other fuel burning appliances in the same room the current edition of BS 5440 Part 2 should be consulted to determine air vent requirements Ensure that the room containing the hob is well ventilated keep natural ventilation holes or install a mechanical ventilation device mechanical cooker hood Prolonged intensive use of the appliance may call for additional ventilation either by the opening of a window or by increasing the level of the mechanical ventilation device where present This hob is not fitted with a device for discharging the products of combustion Ensure that the ventilation rules and regulations are followed The walls behind and near the hob shou
7. ce and when following the cleaning procedure o You should not use a steam jet or any other high pressure cleaning equipment to clean the appliance Installation This appliance must be correctly installed by an Authorised Service Agent strictly in accordance with the manufacturer s instructions and the relevant Standards Please see the specific section of this booklet that refers to installation o The manufacturer declines any responsibility for injury or damage to person or property as a result of improper use or installation of this appliance o If the appliance is being used in a Leisure Accommodation Vehicle the requirements of N 721 MUST be followed o We DO NOT recommend that this appliance is installed on any type of marine vessel Declaration of conformity This appliance complies with the following European Directives 73 23 EEC dated 19 02 1973 Low Voltage Directive 89 336 EEC dated 03 05 1989 EMC Directive inclusive of Amending Directive 92 31 EEC 93 68 EEC dated 22 07 1993 CE Marking Directive 89 109 EEC dated 25 01 1992 Materials that can touch food 90 396 EEC Gas Products EN60335 1 EN60335 2 EN301 1 Safety Standards The manufacturer declares that the hob is built using certified materials and requires the appliance to be installed in accordance with the standards currently in force This appliance must be used by a trained person for domestic purposes only Product dimensions Apert
8. charges Note Completion of this Warranty Registration Card constitutes acceptance of the terms and conditions of this Warranty Distributed by Applico Ltd impact www applico co nz Please complete this section detach and post to Applico Warranty Private Bag 92 900 Onehunga Auckland or register online at www applico co nz PRODUCT TYPE datea n iaasa a spa ica tiv ap MODEL NO sses aia aijaa a baasi Giai aaia oe SERILA L NON osrin a A DATE OF PURCHASE EEE E aiian RE TADLER 2 0 4 aa iiiaio aaa INVOICE SALES DOCKET NO cccccccesecseeeunes a RETAILER ADDRESS c0cescee00 TE EE DEPEN AEE EEA NE E E E PURCHASERS NAMIE ccccccece iti itp bi Gimni manaa aa aaa aatia aiaiai piaia aiana ial aiiin aaan ce APPLICO ADDRESS areca eon kee reece i a Applico Ltd Warranty Department Private Bag 92 900 Onehunga Auckland Affix stamp here
9. e terminal marked with letter L 2l My appliance isn t working correctly IMPORTANT If your appliance appears not to be operating correctly then you should disconnect it from your mains supply and then contact an Authorised Service Agent Log onto wWww applico co nz to locate a Service Agent nearest to you DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF Please note that if an engineer is asked to attend whilst the product is under guarantee and finds that the problem is not the result of an appliance fault then you may be liable for the cost of the call out charge The appliance must be accessible for the engineer to perform any necessary repair If your appliance is installed in such a way that an engineer is concerned that damage will be caused to the appliance or your kitchen then he will not complete a repair This includes situations where appliances have been tiled in sealed in with sealant have wooden obstructions placed in front of the appliance like plinths Or any installation other than the one specified by Applico Ltd has been completed Please refer to the conditions of guarantee that appear on the warranty card that you receive with the appliance IMPORTANT Applico Ltd operates a policy of continuous improvement and reserves the right to adjust and modify its products without prior notification 22 _ VN od od SO WARRANTY REGISTRATION CARD THIS WARRANTY IS VALID IN NEW ZEALA
10. e does not go out by quickly turning from maximum flow to minimum flow If it does then remove the control knob and make further adjustments to the gas flow testing it again once the adjustment has been made Repeat this process for each one of the gas taps 19 Gas tap maintenance These maintenance operations MUST ONLY be carried out by an Authorised Service Agent IMPORTANT Before carrying out any maintenance operations disconnect the appliance from the gas and electricity supplies If a gas tap becomes stiff to operate then you should proceed as follows o Remove the control knobs pan supports burners hob fixing screws and clamps o Remove the hob from the worktop and remove any underside protective covers o Disconnect the fixings holding the tap to the fascia panel and separate the assembly Then clean the cone and seating with a cloth dampened with solvent o Lightly smear the cone with high temperature grease reassemble into position and rotate a few times o Remove the cone again and remove any excess grease making sure that the gas ducts are not obstructed with grease o Carefully reassemble the components and perform a gas soundness test If it becomes necessary to replace a gas tap then you should proceed as follows o Remove the control knobs pan supports burners hob fixing screws and clamps o Remove the hob from the worktop and remove any underside protective covers o Disconnect the f
11. e frequently if they get soiled o IMPORTANT Make sure that the hob surface pan stands and hob burners have cooled before you attempt to touch them o Remove the hob burners by pulling them upwards and away from the hob top o Soak them for about ten minutes in hot water and a little detergent 11 o After cleaning and washing them wipe and dry them carefully o Before placing the burners back on the hob top make sure that the gas jet is not blocked o IMPORTANT Make sure that you reassemble the burners in the Original way Installation The installation must be carried out by an Authorised Service Agent in accordance with the current version of the following o AS NZS 3000 2007 Wiring Regulations o 2010 Electricity Safety Regulations Positioning The adjacent furniture must be able to withstand a AN minimum temperature rise of 85 C above the ambient temperature of the room it is located in during periods of use o This appliance can be located in a kitchen a kitchen diner or a bed sitting room IMPORTANT The appliance must not be installed in a bathroom or shower room This appliance is classified as Class 3 and therefore is to be built into a kitchen unit depending on size or 600mm worktop providing the following minimum distances are allowed o 700 mm between the highest point of the hob surface including the burners and the underside of any horizontal surface directly above it o 400 mm b
12. e hob from the electricity supply before changing the injectors and or adjusting the minimum flow of the burners o Remove the pan stands burners and flame spreaders A o Unscrew the injector B and replace it with the stipulated injector for the new gas Supply see table on next page GENERAL INJ ECTORS TABLE 1 55 Rapid 0 90 Auxiliary 1 18 Semi rapid L P G 0 90 Rapid Butane 0 53 Auxiliary Propane 0 69 Semi rapid o Reassemble all the burners carefully in particular you should make sure that the flame spreader is correctly placed on the burner 18 O IMPORTANT The minimum flow adjustment process must be completed before the appliance is next used Minimum flow adjustment for hob gas taps Service Agent All work must be carried out by an Authorised IMPORTANT Always isolate the hob from the electricity supply before changing the injectors and or adjusting the minimum flow of the burners screw to decrease the gas flow O The correct adjustment is obtained length of about 3 4mm Switch the burner on and set the knob at the minimum position Remove the knob from the tap and place a Small bladed screwdriver in the centre of the tap shaft Unscrew the adjusting screw in order to increase the gas flow or tighten the adjusting when the flame has a For butane propane gas the adjusting screw must be tightly screwed in Refit the control knob Make sure that the flam
13. es and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time During and after use all Surfaces will be hot If it is necessary for younger family members to be in the kitchen please ensure that they are kept under close supervision at all times Older children should only be allowed to utilise the appliance when supervised General Safety O The appliance should only be installed and connected by an Authorised Service Agent Care should be taken to ensure that the units and work surfaces that you build the appliance into meet with the relevant Standards During use O Any film or stickers that are present on the hob surface when it is delivered should be removed before use Care should be used when utilising the appliance otherwise there is a risk of burns being caused You should not allow the electrical connection cables to come into contact with the hob surface when it is hot or any hot cookware If fat and oil overheats then it can ignite extremely quickly For this reason when cooking with fat and oil the appliance should not be left unattended Make sure that all of the cooking zones are switched off after use Cleaning o Cleaning of the hob should be carried out on a regular basis o IMPORTANT Before attempting to clean the appliance it Should be disconnected from the mains and cool o Great care should be taken whilst using this applian
14. es with as little water as possible to reduce cooking times IMPORTANT Always place pans centrally over the hob burners and position them so that the handles cannot get accidentally caught or knocked off You should also make sure that the handle is not over one of the other hob burner flames 10 Cleaning Cleaning operations must only be carried out when the hob is cool The appliance should be disconnected from your mains supply before commencing any cleaning process Cleaning the hob top Any residues that are left on the hob top surface from cleaning AN agents will damage it You should remove any residues with warm soapy water Abrasive cleaners or sharp objects will damage the hob surface you should clean it using warm soapy water Although it is easier to clean some deposits whilst the hob surface is still warm Make sure that the hob surface pan supports and hob burners have all cooled sufficiently before you attempt to touch them After each use o Remove the pan stands and wipe the appliance over with a soft damp cloth that has been put into warm soapy water The cloth should be wrung out after being taken out of the soapy water o Dry the appliance by rubbing the surface with a soft clean cloth o We would recommend that an appropriate neutral and non flammable detergent is used to clean the glass surface of the hob Cleaning the hob burners The hob burners should be cleaned once a week or mor
15. etween the hob surface providing that the underside of the horizontal surface is in line with the outer edge of the hob If the underside of the horizontal surface is lower than 400 mm then it must be at least 50 mm away from the outer edges of the hob o 50 mm clearance around the front back and sides of the appliance measured from the cut out as shown in the diagram on the next page and between the hob surface and any combustible materials 12 Unpacking the appliance When unpacking the appliance please check that the following items are contained within the packaging 1 x Hob Pan stands Burner assemblies Instruction manual Warranty card Fixing screws Clamps Sealing strip LPG conversion jets Self adhesive label for amending the gas category on the appliance s rating plate required if the LPG conversion jets are used 13 Installing the appliance o Cut a hole in the worktop that corresponds with the illustration above 25 mm MIN o IMPORTANT You must have a gap of at least 25 mm between the underneath of the appliance and any surface that is below it o Carefully turn the hob upside down and place it on a cushioned mat o Apply the sealing strip A provided around the edge of the appliance 14 o The protective covering must be removed from both sides o Do not leave a gap in the sealing agent or overlap the thickness o IMPORTANT Do not use a silicon sealant to seal the appliance
16. ixings holding the tap to the fascia panel and separate the assembly o Disconnect the gas pipe from the gas tap and then disassemble them from the gas rail by removing the fixing screws o When fitting a new tap ensure that a new gasket is used 20 o Reconnect the gas tap perform a gas soundness test and then reassemble the hob Electrical connection This appliance must be installed by a qualified person in accordance with Applico s instructions Before connecting the appliance make sure that the Supply voltage marked on the rating plate corresponds with your mains supply voltage o Cable type HO5 RRF 3 core x 0 75 mm Type RR F lt HAR gt marked o The mains supply cable is supplied with this product Replacing the mains supply cable If the mains supply cable is damaged then it must be replaced by an appropriate replacement The mains supply cable should be replaced in accordance with the following instructions o Switch the appliance off at your mains supply o Open the box of the supply board o Unscrew the clamp fixing the cable o Replace the cable with one of the same length and in accordance with the specification given above o The green yellow earth wire must be connected to the terminal marked It must be about 10 mm longer than the live and neutral wires o The blue neutral wire must be connected to the terminal marked with letter N the live wire must be connected to th
17. ld be resistant to heat steam and condensation 16 O Remember that the quantity of air necessary for combustion must never be less than 2m h for each kW of power see total power in kW on the appliance rating plate Gas Safety Installation and Use Regulations IMPORTANT The appliance MUST be connected to the gas supply by use of a 2 BSP Elbow seal copper pipe and an isolation tap fitted in an easily accessible position O It is the law that all gas appliances are installed by competent persons in accordance with the current edition of the Gas Safety Installation and Use Regulations It is in your interest and that of safety to ensure compliance with the law The cooker must also be installed in accordance with the current edition of BS 6172 Failure to install the hob correctly could invalidate the warranty liability claims and lead to prosecution The gas ae Put the gas seal into the elbow Fully tighten the elbow and seal onto the gas rail The elbow MUST be pointing in a downwards direction Gas pressure may be checked on a semi rapid hob burner Remove the appropriate injector and attach a test nipple Light the other burners and observe that the gas pressure complies with the gas standards in force IMPORTANT On completion carry out a gas soundness test 17 Gas adjustment Conversion to LPG All work must be carried out by an Authorised Service Agent IMPORTANT Always isolate th
18. r solid spillovers lack of maintenance or d damage to surface coatings caused by cleaning or maintenance using products not recommended by the owner s handbook e defects caused by normal wear and tear accident negligence alteration misuse or incorrect installations f a product dismantled repaired or serviced by any serviceman other than an authorised service agent g a product not in possession of the original purcha SCT J that if the product is a microwave or small appliance it must be returned to the dealer for servicing These products unless stated otherwise have a 12 month warranty from original date of purchase with 24 months on the microwave magnetron Waste disposers have a 12 month warranty 8 The provision of service under this Warranty is limited by a 25km boundary from the retailer where the product was purchased Such travelling outside of these limits will incur commercial cost to be paid by you regulated by the number of kilometres travelled beyond the 25km limit 50km return trip Nothing herein contained shall be construed in any way as excluding or limiting your rights under the Consumer Guarantees Acts 1993 For service please contact the dealer retailer from whom you purchased the product If you are unable to establish the date of purchase or the fault is not covered by this Warranty or if the product is found to be in working order you will be required to bear all service call
19. t WEEE By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The symbol _ on the product or on the documents accompanying the product indicates that this appliance may not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment Disposal must be carried out in accordance with local environmental regulations for waste disposal For more detailed information about treatment recovery and recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product P o The packaging materials that we use are environmentally friendly and can be recycled o Please discard all packaging material with due regard for the environment Important safety information Your safety is of the utmost importance to us Please make sure that you read this instruction booklet before attempting to install or use the appliance If you are unsure of any of the information contained in this booklet please contact the Retailer where you purchased your unit from General I nformation o This appliance is designed for domestic household use and for the cooking and frying of domestic foodstuffs
20. ure dimensions Depth 500 mm Depth 480 mm Width 5385 mm Width 550 mm Height 40 mm Product specifications o 1x 3 00 kW rapid burner o 2x 1 75 kW semi rapid burner o 1x 1 00 kW auxiliary burner o Side control operation o Automatic ignition o Enamelled pan stands Standard accessories o LPG conversion jets Electrical details Rated Voltage 220 240 Vac 50 60 Hz Supply Connection 13 A double pole switched fused outlet with 3mm contact gap Max Rated Inputs 0 02 kW Mains Supply Lead 3 core x 0 5mm Type RR F lt HAR gt marked Gas details Connection Rp ISO R7 Type Natural Gas 20 9 mbar Alternative LPG G30 28 30 mbar For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice The rating plate of your hob is located on the underneath of the appliance Therefore it is a good idea to record this information before you install your appliance Model Number Serial Number Date of Purchase Gas hob surface layout A 3 00 kW rapid burner B 1 75 kW semi rapid burner C 1 00 kW auxiliary burner D Control panel Using the gas hob Before first use IMPORTANT You should clean the hob surface see Cleaning and maintenance section Switching the hob on The following symbols will appear on the control panel next to each control knob gas off Large flame maximum setting

Download Pdf Manuals

image

Related Search

Related Contents

GH-PLGー 53GS シリーズ  Olympia EDL 01  Philips DVP3055V/19 User's Manual  Bedienungsanleitung  Samsung GT-E2550D Uživatelská přiručka  HP ProLiant 534499-421 server    Precision Ring Drive (PRD) Brochure  Télécharger le référentiel du CAP  

Copyright © All rights reserved.
Failed to retrieve file