User Manual
Contents
1. eene 30 9 TECHNICAL SUPPORT CONTACT wiscscssinsssccctssrccaccstcsanansanraccansieansancaiansiaasaansancsiaaniis 31 Copyright 2008 Hanlong Technology Co Ltd Page 2 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru AE HANLONG Unicorn3002 User Manual 1 WELCOME Unicorn 3002 is an all in one VoIP integrated access device that features superb audio quality rich functionalities high level of integration compactness and ultra affordability The Unicorn 3002 is fully compatible with SIP industry standard and can interoperate with many other SIP compliant devices and software on the market Unicorn 3002 has two FXS ports gt Special compatibility features include gt Nortel MCS Standard SIP Broadsoft gt Howdy 2 WHAT IS IN THE PACKAGE The Unicorn 3002 package contains gt One Unicorn 3002 VoIP adapter One universal power supply gt One Ethernet cable v 3 PRODUCT OVERVIEW 3 1 Key Features Supports SIP 2 0 RFC 3261 TCP UDP IP RTP RTCP HTTP ICMP ARP RARP DNS DHCP both client and server NTP PPPOE STUN TFTP etc gt Built in router NAT Gateway and DMZ port forwarding Device bridge mode support Supports dual SIP accounts via dual FXS ports Powerful digital signal processing DSP to ensure superb audio quality advanced adaptive jitter control and packet loss concealment technology gt Support various2. ean en Unicorn3002 User Manual 6 1 6 1 Device Status DEVICE STATUS MAC Address 00 1fc1 00 12 13 WANIPAddress 192168 0 112 Product Model Unicorn2002 Software Version BOOT 1 1 0 10 2008 03 23 21 52 00 IMG 1 1 0 10 2008 03 29 13 33 00 System Up Time 0 day s 5 hour s 52 minute s 28 second s PPPoE Link Up Disabled zz NAT Primary Dependent Mapping Port Hook Registration DND Forward Busy Forward Delayed Forward Port Status FXS 1 OnHook Registered No FXS 2 OnHook Registered No Reboot All Rights Reserved Hanlong Technology CO LTD 2005 2008 Device Status Options Meaning The device ID in HEX format This is a very important ID for MAC Address ISP troubleshooting There are 2 modes under which the Unicorn 3002 can operate If DHCP mode is enabled then all the field values for the Static IP mode are not used even though they are still saved in the chipset s memory The Unicorn 3002 will acquire its IP address from the first DHCP server it discovers from the office home network it is connected to To use the PPPoE feature the PPPoE account settings need to be set The Unicorn 3002 will attempt to establish a PPPoE session if any of the PPPoE fields have been entered with data If Static IP mode is enabled then the IP address Subnet Mask Default Router IP address DNS Server 1 primary DNS Server 2 secondary fields will need to be configured by the user These fields are reset to zer
3. Option 43 C use PPPoE PPPoE account ID IP Address PPPoE password eeeee PPPoE Service Name Preferred DNS server 0 10 fo ec statically configured as IP Address i92 fies fo n Subnet Mask Default Router DNS Server 1 DNS Server 2 4T GMT 5 00 US Eastern Time New York w Allow DHCP Option 2 to override Time Zone setting No Yes f No C Yes if setto Yes display time will be 1 hour ahead of normal time BASIC OPTIONS SETTING Ds en en Ds en a RENE 9 1 N 168 ps ii TCC Time Zone Daylight Savings Time Options Meaning Web Port Default is 80 IP Address All the field values for the Static IP mode are not used even though they are still saved in the Flash memory The Unicorn3002 acquires its IP address from the first DHCP server it discovers from the LAN it is connected set the PPPoE account settings The Unicorn3002 will establish a PPPoE session if any of the PPPoE fields is set Configure the IP address Subnet Mask Default Router IP address DNS Server 1 primary DNS Server 2 secondary fields These fields are set to zero by default Time Zone This parameter controls how the displayed date time will be adjusted according to the specified time zone Daylight Savings Time This parameter controls whether the displayed time will be daylight savings time or not If set to Yes then the displayed time will be 1 hour ahead of normal tim
4. Be E E E A A E R 10 C ll Features Tables eee ea ee ee ee ee eooo eien 10 5 4 Qd PHP 11 5 5 Status Light Indicator e 11 6 CONFIGURATION GUIDE aras para u EE kRpR ARR R y SEA xta Gau auk Eua ndn nk nnn k Dn ka Ga ui 11 6 1 Configuring Unicorn 3002 using Web Browser eeeeeese 11 6 1 1 Accessing the Web Configuration eeeeseeeeene 12 6 1 2 Programming Unicorn 3002 via the LAN Port sessen 12 6 1 3 X Programming Unicorn 3002 via the WAN Port 12 6 1 4 User Programming and Configuration eseseeeessss 13 6 1 5 PasSWOIdS eene nee DEOR ERE Ee eer erase 13 6 1 6 Configuration Options and Explanations eseeeesssss 13 6 1 6 14 Device Statusi epp 14 6 1 6 2 Basic OPtONS 20 15 6 16 37 SUPE OPU ONS ekre mene Dee een E e E nm deir 17 6 14 04 End User Settings reii ieee lens 19 6 1 7 Saving the Configuration Changes sseeee 28 6 1 8 Rebooting the Unicorn 3002 sseseee 29 6 2 Configuring Unicorn 3002 via Voice Prompt eese 29 Bk DHCP Mode uid rcx ei debeo teilte tane ess 29 6 2 2 STATIC IP Moge Mere 29 6 2 3 Configuration through a Central Server 29 T SOFTWARE UPGRADE 5 2 ntn tini itin ERES Ea Rr E202 30S ndx ES Eq SEN IREXRM EG RI EE I ERMRIIERIR E ERR AREE 30 8 RESTORE TO FACTORY DEFAULT SETTINGS
5. configuration page can be accessed via the LAN or WAN port 6 1 2 Programming Unicorn 3002 via the LAN Port To program Unicorn 3002 via the LAN port directly connect an Ethernet cable from your PC to the LAN port of the Unicorn 3002 After connecting the cable confirm that the green light of the LAN port is on If the green light is not on this means that your PC is not yet properly connected to the Unicorn 3002 via the LAN port For LAN port configuration use the following default IP address to access the device http 192 168 22 1 6 1 3 Programming Unicorn 3002 via the WAN Port The WAN port access for web configuration is disabled by default from the factory To access the web configuration menu from the WAN port you must first access the device via the device LAN port see instructions above Programming Unicorn 3002 via the LAN port and enable the Enable WAN Web Access option End User Password Basic user password to configure this device Reply to ICMP on WAN port No Yes Unitwill not respond to PING from WAN side if setto No WAN side http amp ecess Q Na Yes WAN side access to http server will be rejected if setto No Copyright 2008 Hanlong Technology Co Ltd Page 12 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru AE i HA On Unicorn3002 User Manual After enabling WAN access be sure that the WAN port of the Unicorn 3002 is con
6. cycle the Unicorn 3002 TFTP process may take as long as 1 to 2 minutes over the Internet or just 20 seconds if it is performed on a LAN Users are recommended to conduct TFTP upgrade in a controlled LAN environment if possible For those who do not have a local TFTP server Hanlong technology provides a NAT friendly TFTP server on the public Internet for firmware upgrade Please check the Service section of Hanlong s Web site to obtain this TFTP server s IP address NOTES When Hanlong ATA boot up it will send TFTP or HTTP request to download configuration files there are two configuration files one is cfg txt and the other is cfg001fc1xxxxxx where 001fc1xxxxxx is the MAC address of the Unicorn 3002 These two files are for initial automatically provisioning purpose only for normal TFTP or HTTP firmware upgrade the following error messages in a TFTP or HTTP server log can be ignored 8 RESTORE TO FACTORY DEFAULT SETTINGS Warning Restoring to the factory default settings will delete all configuration information of the device Steps to follow in restoring to factory default settings a Press for voice prompt b Enter 99 and then you will hear the voice prompt Reset c Enter the number 862584658050 A click sound will be heard Copyright 2006 Hanlong Technology Co Ltd Page 30 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru
7. dial tone Dial the forward number and for a dial tone and then hang up 93 Cancel Delayed Call Forward To cancel this feature dial 93 get the dial tone and then hang up Copyright 2008 Hanlong Technology Co Ltd Page 10 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru AE i HANEONG Unicorn3002 User Manual Flash Hook call waiting indication When in conversation without an incoming call this action will switch to a new channel to make a new call 5 4 FAX Unicorn3002 supports FAX in two modes T 38 Fax over IP and fax pass through T 38 is the preferred method because it is more reliable and works well in most network conditions If the service provider supports T 38 please use this method by selecting Fax mode to be T 38 If the service provider does not support T 38 pass through mode may be used To send or receive faxes in fax pass through mode users will need to select all the Preferred Codecs to be PCMU PCMA 5 5 Status Light Indicator Following tables show the Unicorn 3002 button light pattern indication But the Button light Show the PHONE1 status only Red light always indicates not normal status Green light mostly indicate normal working status Light Indicator Signal Pattern FETE Red light flashes every 2 seconds DHCP failed or WAN port has no Red Light if internet connection is Ethernet connection configured for DH
8. establishment and termination minimum maximum i ificati 2dB Rx 20B Y ZEE SU ep Ist olelisI i e xs oO mgizizlt 5229283 m Sial lt ols Zio E Oia lt i 2 s ay2irp isis gt oo co 0o o 3 2 5 9 F oO e Note In 50 1200 milliseconds range lt z3 m Z E 2 Ed o s Callee Request Timer Default is NO Force Timer Default is NO UAC Specify Refresher Default is Omit UAS Specify Refresher Default is UAC Force INVITE Default is NO Special Feature Default is Standard Choose the selection to meet some special requirements from Soft Switch vendors like Lucent FS5000 Simple Endpoint CBCOM etc FAS Impedance Select the impedance of anolog telephone connected to phone port Bellcore North America CID Canada DTMF Brazil DTMF Denmark ETSI DTMF Finland Sweden ETSI FSK France German Norway Taiwan UK CCA Onhook Voltage Select the onhook voltage to suit different area or PBX Polarity Reversal Default is No If set to Yes polarity will be reversed upon call establishment and termination Hook Flash Timing Time period when the cradle is pressed Hook Flash to simulate FLASH To prevent unwanted activation of the Flash Hold and automatic phone ring back adjust this time value Copyright 2008 Hanlong Technology Co Ltd Page 27 of 31 http a
9. gt Pick up the receiver or press the Handsfree button of the analog telephone and press OK KEN A voice will say Enter the new option At this point you can select from the following menu voice prompt options to begin using the Unicorn 3002 Main Menu Enter a Menu Option Menu Voice Will Say the Following Enter for the next menu option Enter to return to the main menu Enter 01 07 12 17 47 86 or 99 Menu option 01 DHCP Mode Static IP Mode Enter 9 to toggle the selection If user selects Static IP Mode user need configure all the IP address information through menu 02 to 05 If user selects Dynamic IP Mode the device will retrieve all IP address information from DHCP server automatically when user reboots the device IP Address IP address The current WAN IP address is announced Enter 12 digit new IP address if in Static IP Mode Subnet IP address Same as Menu option 02 Gateway IP address Same as Menu option 02 DNS Server IP address Same as Menu option 02 MAC Address Announces the Mac address of the unit Preferred Vocoder Enter 9 to go to the next selection in the list PCM U PCMA G 726 G 723 G 729 VVVVV 12 WAN Port Web Access Enter 9 to toggle between enable and disable 13 Firmware Server IP Address Announces current Firmware Ser
10. vocoders including G 711 a law and u law G 723 1 5b 3K 6 3K G 726 32K as well as G 729A and ILBC pending Support Caller ID Name display or block Hold Call Waiting Flash Call Transfer Call Forward 3 way conferencing Call Waiting Caller ID in band and out of band DTMF Dial Plans etc Support fax pass through for PCMU and PCMA and T 38 FoIP Fax over IP Support syslog Support volume amplification Copyright 2008 Hanlong Technology Co Ltd Page 3 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru AE i MATO Unicorn3002 User Manual Support Silence Suppression VAD Voice Activity Detection CNG Comfort Noise Generation Line Echo Cancellation G 168 and AGC Automatic Gain Control Support standard encryption and authentication DIGEST using MD5 and MD5 sess Support for Layer 2 802 1Q VLAN 802 1p and Layer 3 QoS ToS DiffServ MPLS gt Support automated NAT traversal without manual manipulation of firewall NAT Support device configuration via built in IVR Web browser or central configuration file through TFTP or HTTP Support firmware upgrade via TFTP or HTTP with encrypted configuration files Ultra compact wallet size and lightweight design great companion for travelers Compact lightweight Universal Power adapter 3 2 Hardware specification Model Unicorn 3002 LAN interface
11. 1 x RJ45 10Base T WAN interface 1 x RJ45 10Base T FXS telephone port 2x FXS LED light Green and red color Universal switching power supply Input 100 240VAC 50 60 Hz Output 5VDC 1200mA UL certified Dimension 70mm W 130mm D X 27mm H Weight 0 30kg Temperature 40 130 F 5 45C Humidity 10 90 4 INSTALLATIONS Unicorn 3002 Analog Telephone Adaptor is an all in one VoIP integrated device designed to be a total solution for networks providing VoIP services The Unicorn 3002 VoIP functionalities are available via regular analog telephones Unicorn 3002 has two FXS ports The PHONE 1 port next to the LAN is FXS port 1 and the PHONE2 on the side of the Unicorn 3002 is FXS port 2 Each FXS port can have a separate SIP account This is a key feature of Unicorn 3002 Both ports can make calls concurrently Copyright 2008 Hanlong Technology Co Ltd Page 4 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru AE HANLONG Unicorn3002 User Manual Analog Phone Internet Network Analog Phone FXS FXS FAX FAX E dl JN i lt Y Following are the steps to install a Unicorn 3002 Connect a standard touch tone analog telephone or fax machine to PHONE1 port Connect another standard touch tone analog telephone or fax machine to PHONE2 port Insert the Ethernet cable into the WAN port of Unicorn 3002 and connect the other end of the Ethernet cable to
12. 2 to download firmware or configuration file through either the TFTP or HTTP server Keep alive interval Firmware Upgrade and Provisioning Copyright 2008 Hanlong Technology Co Ltd Page 17 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru Unicorn3002 User Manual NTP Server time gist gov URI or IP address Lock Keypad Update 9 No OYes configuration update via keypad is disabled if setto Yes Disable Voice Prompt No Yes voice promptis disabled if setto Yes Syslog Server Syslog Level NONE v Download Device Configuration Call Progress Tones Syntax fl freq vol f2 freq vol c on1 offl on2 off2 on3 off3 Note freq 0 4000Hz vol 30 0dBm Dial Tone f1 350 13 f2 440 13 c 0 0 Ringback Tone f1 440 19 f2 480 19 c 2000 4000 Busy Tone f1 480 24 f2 620 24 c 500 500 Reorder Tone f1 480 24 2 620 24 c 260 260 Confirmation Tone f1 350 11 f2 440 11 c 100 100 100 100 100 100 Call Waiting Tone f1 440 13 c 300 10000 300 10000 0 0 li Default Ring f1 440 13 f2 480 13 c 2000 4000 Cadence Only the cadence is configurable Syntax ccon1 offl on2 off2 on3 off3 Restore Configuration GR Restore Configuration All Rights Reserved Hanlong Technology CO LTD 2005 2008 Setti
13. AT Firewall NAT IP address used in SIP SDP message Default is USE NAT IP blank Disable call waiting Default is No No Key Entry Timeout Default is No Preferred Vocoder The Unicorn 3002 supports up to 7 different Vocoder types including G 711 A U law G 723 1 G 726 G 728 G 729A B iLBC pending Depending on the product model some of these Vocoders may not be provided in standard release Users can configure Vocoders in a preference list that will be included with the same preference order in SDP message The first Vocoder in this list can be entered by choosing the appropriate option in Choice 1 Similarly the last Vocoder in this list can be entered by choosing the appropriate option in Choice 7 Voice Frames per TX This field contains the number of voice frames to be transmitted in a single packet When setting this value the user should be aware of the requested packet time used in SDP message as a result of configuring this parameter This parameter is associated with the first vocoder in the above vocoder Preference List or the actual used payload type negotiated between the 2 conversation parties at run time e g if the first vocoder is configured as G723 and the Voice Frames per TX is set to be 2 then the ptime value in the SDP message of an INVITE request will be 60ms because each G723 voice frame contains 30ms of audio Similarly if this field is set to be 2 and if the fi
14. CP Red light flashes every 2 Red Light seconds if SIP server is configured Unicorn 3002 is not able to register with SIP gatekeeper proxy server Message waiting Green Light Button flashes every 2 seconds if feature is available Phone is ringing Incoming call in Green Light Button flashes at 1 10 second progress 6 CONFIGURATION GUIDE 6 1 Configuring Unicorn 3002 using Web Browser Unicorn 3002 has embedded Web server and HTML pages that allow users to configure the Unicorn 3002 through an easy to use Web browser interface such as Microsoft s Internet Explorer or Netscape browser Below is a screen shot of the Unicorn 3002 configuration page Copyright 2008 Hanlong Technology Co Ltd Page 11 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru EZ Unicorn3002 User Manual BASIC OPTIONS Web Port 80 defaultfor HTTP is 80 O dynamically assigned via DHCP DHCP hostname optional DHCP domain optional DHCP vendor class ID optional Ouse PPPoE PPPoE account ID PPPoE password IP Address PPPoE Service Name Preferred DNS server statically configured as IP Address Subnet Mask Default Router DNS Server 1 DNS Server 2 6 1 1 Accessing the Web Configuration The Unicorn 3002
15. EZ HANLONG Unicorn 3002 User Manual d Wait for 15 seconds The device is now restored to the factory default setting 9 TECHNICAL SUPPORT CONTACT Email Support mail hanlongtek com Copyright 2006 Hanlong Technology Co Ltd Page 31 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002
16. an uplink port a router or a modem etc Connect a PC to the LAN port of Unicorn 3002 gt Insert the power adapter into the Unicorn 3002 and connect it to a wall outlet 4 1 Safety The Unicorn 3002 is compliant with various safety standards including FCC CE and C Tick Its power adaptor is compliant with UL standard The Unicorn 3002 should only operate with the universal power adaptor provided in the package Warning Please do not use a different power adapter Using other power adapter may damage the Unicorn3002 and will void the manufacturer warranty Caution Changes or modifications to this product not expressly approved by Hanlong Copyright 2008 Hanlong Technology Co Ltd Page 5 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru Tec HNOLoOGY Unicorn3002 User Manual Technology or operation of this product in any way other than as detailed by this User Manual could void your manufacturer warranty Information in this document is subject to change without notice No part of this document can be reproduced or transmitted in any form or by any means electronic or mechanical for any purpose without the express written permission of Hanlong Technology 5 BASIC OPERATIONS 5 1 Get Familiar with Voice Prompt Unicorn 3002 has stored a voice prompt menu for quick access to settings and simple configuration You can enter this voice prompt menu two ways
17. by clicking on the Reboot button after each update to the configuration page Alternatively you can reboot by unplugging the power supply of the Unicorn 3002 and then powering it on again If your Unicorn 3002 ever becomes stuck or un responsive you can unplug the power supply to reboot it Frequent rebooting by unplugging the power supply is not recommended and should not be necessary 6 2 Configuring Unicorn 3002 via Voice Prompt 6 2 1 DHCP Mode Follow section 5 1 with voice menu option 01 to enable Unicorn 3002 to use DHCP 6 2 2 STATIC IP Mode Follow section 5 1 with voice menu option 01 to enable Unicorn 3002 to use STATIC IP mode then use option 02 03 04 to set up Unicorn 3002 s IP Subnet Mask Gateway respectively 6 2 3 Configuration through a Central Server Unicorn 3002 devices can be automatically configured from a central provisioning system When Unicorn 3002 boots up it will send TFTP or HTTP request to download configuration files There are two configuration files one is cfg txt and the other is cfg001fc1xooxxx where 001fc1xxxxxx is the MAC address of the Unicorn 3002 For more information regarding configuration file format please refer to the related technical documentation The configuration file can be downloaded via TFTP or HTTP from the central server A service provider or an enterprise with large deployment of Unicorn 3002s can easily manage the configuration and service prov
18. dress Once all of the digits are collected the input will be processed Incorrect keyed entry cannot be deleted or undone The Unicorn 3002 will prompt you to start over by telling you that you made an error 5 2 Make Phone call 5 2 1 Calling Phone or Extension Numbers Dial the number directly and wait for 4 seconds Default is 4 seconds To change the default change the settings via the web configuration page under No Key Entry Timeout Or Dial the number directly and press assuming that Use as Dial Key is set to YES during web configuration of your Unicorn 3002 Other functions available during the call are call waiting flash call transfer and call forward Your SIP gatekeeper proxy server needs to support these features in order for them to work 5 2 2 Call Hold While in conversation pressing the FLASH button on the attached phone will put the remote end on hold Pressing the FLASH button again will release the previously Hold Copyright 2008 Hanlong Technology Co Ltd Page 7 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru AE HANLONG Unicorn3002 User Manual party and the bi directional media will resume 5 2 3 Call Waiting If call waiting feature is enabled while the user is in a conversation he will hear a special stutter tone if there is another incoming call User can press the flash button to put the current call party on
19. e Copyright 2008 Hanlong Technology Co Ltd Page 15 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru Date Display Format Device Mode LAN Subnet Mask LAN DHCP Base IP DHCP IP Lease Time DMZ IP Port Map End User Password WAN side http access Options Date Display Format Unicorn3002 User Manual Year Manth Day Month Day Year Day Manth Year NAT Router Bridge 255 255 255 0 Default is 255 255 255 0 192 168 2 1 Base IP for the LAN port default is 192 168 2 1 24 Hours Default is 120 hours or 5 days WAN Port LAN IP LAN Port Protocol UDP WAN Port0 LAN IP LAN Port9 Protocol UDP x WAN Port0 LAN IP LAN Port Protocol UDP WAN PortO LAN IP LAN Port9 Protocol UDP WAN PortO LAN IP LAN Port Protocol UDP x WAN Port0 LAN IP LAN Port Protocol UDP x WAN Part LAN IP LAN Port Protocol UDP v WAN Port LAN IP LAN Port Protocol UDP v Basic user password to configure this device Reply to ICMP on WAN pot O No Yes Unitwill not respond to PING from WAN side if setto No O No Yes WAN side access to http server will be rejected if setto No BASIC OPTIONS SETTING Meaning Allow user to choose among the following three formats Year Month Day Month Day Year Day Month Year Device Mode To use the device as a router or a bridge LAN Subnet Mask Sets the LAN subnet mask Defaul
20. e Password purposely not displayed for securityprotection grace optional e g John Doe Use DNS SRV No Oves No QOYes ONo 9Yes 9No Oves in minutes default 1 hour max 45 days 9 No O lt es local SIP port 5060 default 5060 5004 1024 65535 default 5004 No Oves No Oves Two FXS SIP accounts each has its own configuration page Their configurations are identical The following is a screen shot of FXS Port 1 Account settings zu xi c 4Joj uicitdlic o o o 0c o 5 5 o D oO 2 ed 2 g n amp En S m 2g z2 o E EIE oe S eye oc D a o o S 9 oj m cl gl oil3l o Fa 8 o s S 7 5 c lizislisis o 9 l amp ln is z zo D o u mi d m o o ES E 8 o Ld 3 S S E by e zi Copyright 2008 Hanlong Technology Co Ltd Page 19 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru Settings Options Account active Unicorn3002 User Manual END USER SETTING Meaning When set to Yes the FXS port is activated SIP Server This field contains the URI string or the IP address and port if different from 5060 of the SIP proxy server e g the following are some valid examples sip my voip provider com or sip my company sip server com or 192 168 1 200 5066 Outbound Proxy This field contains the URI string or the IP address and port if different from 5060 of
21. ect IP Call 1 Both Unicorn3002 and other VoIP Device have public IP addresses or 2 Both Unicorn3002 and other VoIP Device are on the same LAN using private IP addresses or 3 Both Unicorn3002 and other VoIP Device can be connected through a router using public or private IP addresses with necessary port forwarding or DMZ Unicorn3002 supports two ways to make Direct IP Calling Using IVR 1 Pick up the analog phone then access the voice menu prompt by dial 2 Dial 47 to access the direct IP call menu 3 Enter the IP address using format ex 192 168 0 160 after the dial tone Copyright 2008 Hanlong Technology Co Ltd Page 8 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru AE HANLONG Unicorn3002 User Manual Using Star Code 1 Pick up the analog phone then dial 47 2 Enter the target IP address using same format as above Note NO dial tone will be played between step 1 and 2 Destination ports can be specified by using encoding for followed by the port number Examples a If the target IP address is 192 168 0 160 the dialing convention is 47 or Voice Prompt with option 47 then 192 168 0 160 followed by pressing the key if it is configured as a send key or wait 4 seconds In this case the default destination port 5060 is used if no port is specified b If the target IP address port is 192 168 1 20 5062 then the d
22. ep alive interval 20 in seconds default 20 seconds Upgrade Via TFTP HTTP Firmware Server Path 192 168 0 169 Config Server Path fm hanlongtek com unicorn Firmware Upgrade Firmware File Prefix ii Firmware File Postfix Config File Prefix Config File Postfix and Provisioning Automatic Upgrade O No Yes checkfor upgrade every 7 minutes default 7 days Always Check for New Firmware Check New Firmware only when FAN pre suffix changes Super Options Setting Options Meaning This contains the password to access the Advanced Web Configuration page This field is case sensitive Only the administrator can configure the Advanced Admin Password Settings page Password field is purposely left blank for security reasons after clicking update and saved The maximum password length is 26 characters only digit or letter Home NPA Local area code for North American Dial Plan This field defines the layer 3 QoS parameter which can Layer3 Qos be the value used for IP Precedence or Diff Serv or MPLS Default value is 48 Layer2 Qos Value used for layer 2 VLAN tag Default setting is blank Stun sever is IP address or Domain name of the STUN server This parameter specifies how often the Unicorn3002 sends a blank UDP packet to the SIP server in order to keep the hole on the NAT open Default is 20 seconds Minimum value is 20 seconds Enables Unicorn300
23. essentially equivalent to the Re Dial key If set to No this key will then be included as part of the dial string to be sent out Dial Plan Dial Plan Rules 1 Accept Digits 1 2 3 4 5 6 7 8 9 0 2 Grammar x any digit from 0 9 a xx at least 2 digit number b exclude c 3 5 any digit of 3 4 or 5 Copyright 2008 Hanlong Technology Co Ltd Page 25 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru TECHNOLOGY Unicorn3002 User Manual d 147 any digit 1 4 or 7 e lt 2 011 gt replace digit 2 with 011 when dialing Example 1 369 11 1617xxxxxxx Allow 311 611 911 and any 10 digit numbers of leading digits 1617 Example 2 1900x4 lt 1617 gt Xxxxxxx Block any number of leading digits 1900 and add prefix 1617 for any dialed 7 digit numbers Example 3 1xxx 2 9 xxxxxx lt 2 011 gt x Allow any length of number with leading digit 2 and 10 digit numbers of leading digit 1 and leading exchange number between 2 and 9 If leading digit is 2 replace leading digit 2 with 011 before dialing 3 Default Outgoing x Subscribe for MWI Default is No When set to Yes a SUBSCRIBE for Message Waiting Indication will be sent periodically Send Anonymous If this parameter is set to Yes the From header in outgoing INVITE message will be set to anonymous essentially blocki
24. ey are set to North American frequencies Frequencies should be configured with known values to avoid uncomfortable high pitch sounds ON is the period of ringing On time in ms while OFF is the period of silence In order to set a continuous ring OFF should be zero Otherwise it will ring ON ms and a pause of OFF ms and then repeat the pattern Ring 1 6 are reserved for distinct call waiting tones through SIP Alert Info Ring 7 12 are distinct ring tones through SIP Alert Info Both client and Server need to support this to be a useful feature Currently distinct ring tone feature is only supported under Lucent Special Feature Default is No Jitter Buffer Length Distinct Ring Tone Disable Call Waiting Disable Call Waiting Tone Default is No This is to disable the stutter Call Waiting Tone when a Call Waiting call arrives The CWCID will still be displayed Ring Timeout Incoming call will stop ringing when not picked up given a specific period of time No Key Entry Timeout Default is 4 seconds Early Dial Default is No Use only if proxy supports 484 response Dial Plan Prefix Sets the prefix added to each dialed number Use as Send Key This parameter allows users to configure the key to be used as the Send or Dial key If set to Yes pressing this key will immediately trigger the sending of dialed string collected so far In this case this key is
25. g is PCMA v choice 5 current setting is G 728 Y choice 6 current setting is G 7294 B v Voice Frames per TX 2 up to 10 20 32 64 for G711 6726 G723 other codecs respectively Setting Options DTMF Payload Type This parameter sets the payload type for DTMF using END USER SETTING Meaning RFC2833 DTMF in Audio Send DTMF as inband in audio DTMF via RFC2833 Send DTMF via RTP According to RFC 2833 DTMF via SIP INFO Send DTMF via SIP INFO message Send Flash Event This parameter allows users to control whether to send an SIP NOTIFY message indicating the Flash event or just to Copyright 2008 Hanlong Technology Co Ltd Page 21 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru TECHNOLOGY Unicorn3002 User Manual switch to the voice channel when users press the Flash key Enable Call Features Default is No If set to Yes Call Forwarding amp Do Not Disturb are supported locally Offhook Auto Dial This parameter allows users to configure a User ID or extension number to be automatically dialed upon offhook Please note that only the user part of a SIP address needs to be entered here The Unicorn 3002 will automatically append the and the host portion of the corresponding SIP address Proxy Require SIP Extension to notify SIP server that the unit is behind the N
26. gle SIP account on the gateway and have the ability to use all FXS ports to make receive calls Using this feature all ports active in same hunt group will have the same phone number and incoming calls will be distributed in a round robin manner among the ports active in that hunt group 5 3 CALL FEATURES Call Features Tables Following table shows the call features of Unicorn 3002 23 3 way conference 87 Blind Transfer 30 Block Caller ID for all subsequent calls al Send Caller ID for all subsequent calls 67 Block Caller ID per call 82 Send Caller ID per call 50 Disable Call Waiting for all subsequent calls 51 Enable Call Waiting for all subsequent calls 70 Disable Call Waiting Per Call 71 Enable Call Waiting Per Call 72 Unconditional Call Forward To use this feature dial 72 and get the dial tone Then dial the forward number and for a dial tone then hang up 73 Cancel Unconditional Call Forward To cancel Unconditional Call Forward dial 73 and get the dial tone then hang up 90 Busy Call Forward To use this feature dial 90 and get the dial tone Then dial the forward number and for a dial tone then hang up 91 Cancel Busy Call Forward To cancel Busy Call Forward dial 91 and get the dial tone then hang up 92 Delayed Call Forward To use this feature dial 92 and get the
27. hannel 0 will use this port value for RTP and the port value 1 for its RTCP channel 1 will use port value 2 for RTP and port value 3 for its RTCP The default value for FXS port is 5004 The default value for FXO port is 5008 Use Random Port This parameter when set to Yes will force random generation of both the local SIP and RTP ports This is usually necessary when multiple Unicorn 3002 are behind the same NAT Refer To Use Target Default is NO If set to YES then for Attended Transfer the Refer To header uses the transferred target s Contact Contact header information DTMF Payload Type 101 DTMF in Audio Ono Ores DTMF via RFC2833 Ono 9 Yes DTMF via SIP INFO 9No Oves Send Flash Event No Yes Flash will be sentas a DTMF event if setto Yes Enable Call Features ONo Yes ifYes call features using star codes will be supported locally Offhook Auto Dial User ID extension to dial automatically when offhook Proxy Require I Use NAT IP used in SIP SDP message if specified Disable Call Waiting Ono Ofes 00 00000 0 in listed order No Key Entry Timeout 4 jnseconds default is 4 seconds choice 1 current setting is PCMU v choice 2 current setting is G 726 32 v Preferred Vocoder choice 3 current setting is G 723 1 choice 4 current settin
28. hold and switch to the other call Pressing flash button toggles between two active calls 5 2 4 3 way Conferencing Unicorn3002 supports 3 way conference in two styles star code style or Bellcore style Star Code Style 3 way Conference Assuming that call party A and B are in conversation A wants to bring C in a conference 1 A presses FLASH on the analog phone or Hook Flash for old model phones to get a dial tone 2 A dials 23 then C s number then or wait for 4 seconds 3 If C answers the call then A press flash to bring B C in the conference 4 If C does not answer the call A can press flash back to talk to B Bellcore Style 3 way Conference Bellcore style 3 way conference is also supported To do this user needs to enable Use Bell style 3 way Conference in FXS web configuration Assuming that call party A and B are in conversation A wants to bring C in a conference 1 A presses FLASH on the analog phone or Hook Flash for old model phones to get a dial tone 2 A dials C s number then or wait for 4 seconds 3 If C answers the call then A press flash to bring B C in the conference 4 If C does not answer the call A can press flash back to talk to B 5 2 5 Direct IP to IP Calls Direct IP calling allows two parties that is a FXS Port with an analog phone and another VoIP Device to talk to each other in an ad hoc fashion without a SIP proxy Elements necessary to completing a Dir
29. http arttel ru User Manual Unicorn 3002 Analog Telephone Adaptor Hanlong Technology Co Ltd http www hanlongtek com http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru AE HANLONG Unicorn3002 User Manual Table of Content T WELCOME isscesecsecacesccasccacedncaasdecanesacecacaiecacantsaaacaasietacestcaiacactiacadacaianesnanenintacaeninteaeenncntse 3 2 WHAT IS IN THE PACKAGE icrascinuniaiinuaik latns mri uu nca E CR ERREUR GREEN RR 3 3 PRODUCT OVERVIEW 2 3 d Rt xt tok Rega RE bu RERR ERE ARE REER RE EX ERR MRRE E RERRRAK RR EERIEARR S KR AKA E 3 3 1 Key Feature ERE 3 3 2 Hardware specificatiOn sesira NE 4 LEM LI EE pe e 4 4 1 SB oen id E E Lu Lu LE LE cL 5 5 BASIC OPERATIONS C 6 5 1 Get Familiar with Voice Prompt sei aieceeseiininnnhhnnnkanekanahaiekhands 6 5 2 Make Phore c ll n ae Aaa ate 7 5 2 1 Calling Phone or Extension Numbers eese 7 52 2 CG oes secs ee ee cee 7 52 3 Gall cro eee 8 Bod ay Conferencing nese ece se saccsaccacese canina usu cenas ren ran Seep cum Sosa EE E ep Eua 8 Star Code Style S way GOn BIBTIGB seisiciiiscli acne 8 Bellcore Style 3 way Conference essen 8 5 25 Direct Pto P Callas uai in EORR E Do E AER 8 526 Blind Mz Tm 9 52 7 Attended Transfer ie tiennent een 9 52 80 Humming Ete ERR 10 5 3 ra er
30. iLBC payload type This defines payload time for iLBC Default value is 98 The valid range is between 96 and 127 4726 16 Payload io rcdirvalue 1598 Range is from 96 to 127 Type G726 24 Payload p c Itt value is 99 Range is from 96 to 127 Type G726 40 Payload p c tt value is 103 Range is from 96 to 127 Type Copyright 2008 Hanlong Technology Co Ltd Page 24 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru TECHNOLOGY Unicorn3002 User Manual D Payload Default value is 102 Range is from 96 to 127 Default is No VAD allows detecting the absence of audio and VAD conserve bandwidth by preventing the transmission of silent packets over the network Symmetric RTP Default is No When set to Yes the device will change the destination to send RTP packets to the source IP address and port of the inbound RTP packet last received by the device FAX Mode T 30Auto Detect FolP by default or Pass Through must use codec PCMU PCMA Fax Tone Detection Mode Default is Callee This decides whether Caller or Callee sends out the REINVITE for T 38 or pass through T 30 Jitter Buffer Type Select either Fixed or Adaptive based on network conditions Select Low Medium or High based on network conditions Using these settings user can configure ring or tone frequencies according to their preference By default th
31. ialing convention would be 47 or Voice Prompt with option 47 then 192 168 0 160 5062 followed by pressing the key if it is configured as a send key or wait for 4 seconds NOTE When completing direct IP call the Use Random Port should set to NO You can not make direct IP calls between FXS1 to FXS2 since they are using same IP 5 2 6 Blind Transfer Assuming that call party A and party B are talking to each other on the phone Party A wants to transfer party B to party C Party A presses FLASH on the analog phone or Hook Flash for old model phones to get a dial tone Then party A dials 87 then dials party C s number and then or wait for 4 seconds Party A can hangs up the phone Note Call features have to be activated during web configuration by selecting YES to Enable Call Features These features need to be supported by your SIP gatekeeper proxy server in order to work Party A can hold on to the phone and wait for one of the three following events 1 Aquick confirmation tone temporarily using the call waiting indication tone followed by a dial tone This indicates the transfer is successful transferee has received a 200 OK signal from transfer target At this point party A can either hang up or make another call 2 A quick busy tone followed by a restored call on supported SIP gatekeeper platforms only This means the transferee has received a 4xx response signal for the INVITE and will
32. isioning of individual devices remotely and automatically from a central server The central provisioning system uses enhanced NAT friendly TFTP or HTTP thus no NAT issues and other communication protocols to communicate with each individual Unicorn 3002 for firmware upgrade etc http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru EZ HANLONG Unicorn 3002 User Manual 7 SOFTWARE UPGRADE To upgrade software Unicorn 3002 can be configured with a TFTP server where the new code image is located The TFTP upgrade can work in either static IP or DHCP mode using private or public IP address It is recommended to set the TFTP server address in either a public IP address or on the same LAN with the Unicorn 3002 There are two ways to set up the TFTP server to upgrade the firmware namely through voice menu prompt or via the Unicorn 3002 s Web configuration interface To configure the TFTP server via voice prompt follow section 5 1 with option 06 once set up the TFTP IP address power cycle the ATA the firmware will be fetched once the ATA boots up To configure the TFTP server via the Web configuration interface open up your browser to point at the IP address of the Unicorn 3002 Input the admin password to enter the configuration screen From there enter the TFTP server address in the designated field towards the bottom of the configuration screen Once the TFTP server is configured please power
33. nected to an uplink i e router hub switch etc Then get the WAN IP address of the Unicorn 3002 by following section 5 1 of this user manual and selecting menu option 02 Then access the Unicorn 3002 via your web browser by entering the WAN IP address http Unicorn 3002 s IP Address Be sure that your PC is connected to the router hub switch directly or via the LAN port which also serves as a pass through connection for internet network access for your PC of the Unicorn 3002 6 1 4 User Programming and Configuration From your web browser the Unicorn 3002 will show the following login screen Hanlong VOIP Device Configuration Password Ss LT All Rights Reserved Hanlong Technology CO LTD 2005 2008 Enter the password and click on the Login button 6 1 5 Passwords Passwords are case sensitive and all Unicorn devices come with factory default passwords as indicated below Advanced User Password for access to Super User Options admin End User Password for access to Basic User Options 1234 6 1 6 Configuration Options and Explanations After a correct password is entered in the login screen the embedded web server inside the Unicorn 3002 will show the configuration page which is explained in details below Copyright 2008 Hanlong Technology Co Ltd Page 13 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru
34. ng the Caller ID from displaying Anonymous Call Default is No If set to Yes incoming calls with anonymous Caller Rejection ID will be rejected with 486 Busy message Session Default is 180 seconds Expiration Min SE Default is 90 seconds Caller Request Default is NO Timer Copyright 2008 Hanlong Technology Co Ltd Page 26 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru Ring Tones Ring Tone 1 Ring Tone 2 Ring Tone 3 Ring Tone 4 Ring Tone 5 Ring Tone B Ring Tone 7 Ring Tone 8 Ring Tone 9 Ring Tone 10 Syntax c on1 off1 on2 off2 on3 off3 c 2000 4000 c 2000 4000 c 2000 4000 c 2000 4000 2000 4000 c 2000 4000 c 2000 4000 c 2000 4000 c 2000 4000 c 2000 4000 O Yes When caller supports timer but did not request one 9 No 9 No Quac Ouas omit Recormmended UAC O UAS When UAC did not specify refresher tag No O Yes Always refresh with INVITE instead of UPDATE Standard O Yes Use timer even when remote party does not support orce INVITE eie sSisiee E oosz 2 E 2 z s T s S 2 8 m 2 l S Dom a 2 a z AE 3 8 8 8 8 8 z 600 Ohm North America Bellcore North America lt 36v w 9No Yes reverse polarity upon call
35. ng Options NTP server URI or IP address of the NTP Network Time Protocol server Used by the phone to synchronize the date and time Super Options Meaning Lock Keypad Update If set to Yes the configuration update via keypad is disabled Disable Voice Prompt Default is No Syslog Sever The IP address or URL of System log server This feature is especially useful for the ITSP Internet Telephone Service Provider Syslog level Select the unicorn3002 to report the log level Default is NONE The level is one of DEBUG INFO WARNING or ERROR Syslog messages are sent based on the following events 1 2 NAT related info INFO level sent or received SIP message DEBUG level SIP message summary INFO level inbound and outbound calls INFO level registration status change INFO level negotiated codec INFO level Ethernet link up INFO level SLIC chip exception WARNING and ERROR levels 10 memory exception ERROR level The Syslog uses USER facility In addition to standard Syslog payload it contains the following components GS LOG device MAC address error code error message Example May 19 02 40 38 192 168 1 14 GS LOG 00 0b 82 00 a1 be 000 0 4Oo 0 C5 product model version on boot up INFO level Copyright 2008 Hanlong Technology Co Ltd Page 18 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 htt
36. o by default Contains the product model info Program This is the main software release Boot and Loader are seldom changed Shows system up time since the last reboot Indicates whether the PPPoE connection is up if the Unicorn3002 is connected to DSL modem Indicates the type of NAT connection used by the Unicorn3002 via its WAN port Based on STUN protocol WAN IP Address Product Model Software Version System Up Time PPPoE Link Up NAT Port Status Shows several information regarding the individual FXS ports Port Hook Registration DND Forward Busy Forward Delayed Forward FXS1 On Hook Registered Yes 613 FXS2 On Hook Registered No 614 Both FXS port1 and FXS port2 are registered with this SIP Server FXS Port 1 user has set Do Not Disturb Copyright 2008 Hanlong Technology Co Ltd Page 14 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru HANLONG Unicorn3002 User Manual e FXS Port 1 user has set his calls to be forwarded unconditionally to ext 613 FXS Port 2 user has set his calls to forward to 614 when his phone is busy 6 1 6 2 Basic Options Web Port eo default for HTTP is 80 C dynamically assigned via DHCP DHCP hostname Opi 12 DHCP domain Opini DHCP vendor class ID tion 60 DHCP vendor specific p 9 1 information
37. p arttel ru JEE Unicorn3002 User Manual Ethernet link is up Download User can download configuration from the web page and save to Device configuration file Configuration Call Progress Using these settings users can configure tone frequencies and Tones cadence according to their preference By default they are set to North American frequencies Configure these settings with known values to avoid uncomfortable high pitch sounds ON is the period of ringing On time in ms while OFF is the period of silence In order to set a continuous tone OFF should be zero Otherwise it will ring ON ms and a pause of OFF ms and then repeat the pattern Example configuration for N A Dial tone f12350 9 13 122440 9 13 c 0 0 Syntax f1 freq vol f2 freq vol c on1 off1 on2 off2 on3 off3 Note freq 0 4000Hz vol 30 OdBm Restore User can restore the before configuration from the configuration Configuration file saved at local pc 6 1 6 4 End User Settings FXS PRT 1 OPTIONS Account Active ONo vYes william xanadu hanlongtec cn amp d sip mycompany com or IP address Outbound Proxy 192 168 0 100 e g proxy myprovider com or IP address if any ONo No butsend keep alive OSTUN OUPNP NAT Traversal SIP User ID 8201 the user part of an SIP address Authenticate ID 8201 can be identical to or different from SIP User ID Authenticat
38. rst vocoder Copyright 2008 Hanlong Technology Co Ltd Page 22 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru AE HANLONG Unicorn3002 User Manual chosen is G729 or G711 or G726 then the ptime value in the SDP message of an INVITE request will be 20ms If the configured voice frames per TX exceeds the maximum allowed value the Unicorn 3002 will use and save the maximum allowed value for the corresponding first vocoder choice The maximum value for PCM is 10 x10ms frames for G726 it is 20 x10ms frames for G723 it is 32 x30ms frames for G729 G728 64 x10ms and 64 x2 5ms frames respectively Copyright 2008 Hanlong Technology Co Ltd Page 23 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru Ring Tone 1 usedifincoming caller ID is Distinctive Ring Tone Ring Tone 1 used ifincoming caller ID is Ring Tone 1 used ifincoming caller ID is Disable Call Waiting 9 No O vds Disable Call Waiting Tone No OYes Ring Timeout 60 10 300 seconds default is 60 seconds No Key Entry Timeout in seconds default is 4 seconds Early Dial No Yes use Yes only if proxy supports 484 response Dial Plan Prefix this prefix string is added to each dialed number Use as Dial Key Ono Yes f
39. rttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru JEE Unicorn3002 User Manual Handset volume adjustment RX is for receiving volume TX is for transmission volume Default values are OdB for both parameters 6dB generates the highest volume and 6dB generates the lowest volume Volume Amplification This function lets you configure ring tone cadence preferences User has 10 choices Ring Tones The configuration completed in Distinctive Ring Tones block in the same page applies to ring tones cadences configured here 6 1 7 Saving the Configuration Changes Once a change is made users should click on the SaveSet button in the Configuration page as follow Ring Tone 9 c 2000 4000 Ring Tone 10 c 2000 4000 All Rights Reserved Hanlong Technology CO LTD 2005 2008 The Unicorn 3002 will then display the following screen to confirm that the changes have been saved Please allow 5 to 10 seconds before rebooting the device SAVING Your changes have been saved Please wait 5 second and then reboot the device All Rights Reserved Hanlong Technology CO LTD 2005 2008 Copyright 2008 Hanlong Technology Co Ltd Page 28 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru HANLONG Unicorn 3002 User Manual 6 1 8 Rebooting the Unicorn 3002 You can reboot the Unicorn 3002
40. set to Yes Otherwise set it to No If Yes is set a user phone parameter will be attached to the From header in SIP request SIP Registration This parameter controls whether the Unicorn 3002 needs to send REGISTER messages to the proxy server The default setting is Yes Unregister on Reboot Default is No If set to Yes then the SIP user will be unregistered on reboot Register Expiration This parameter allows the user to specify the time frequency in minutes the Unicorn 3002 refreshes its registration with the specified registrar The default interval is 60 minutes or 1 hour The maximum interval is 65535 minutes about 45 days Outgoing call without Registration Default is No If set to Yes user can place outgoing calls even when not registered if allowed by ITSP but is unable to receive incoming calls Copyright 2008 Hanlong Technology Co Ltd Page 20 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru TECHNOLOGY Unicorn3002 User Manual Local SIP port This parameter defines the local SIP port the Unicorn 3002 will listen and transmit The default value for FXS port is 5060 The default value for FXO port is 5062 Local RTP port This parameter defines the local RTP RTCP port pair the Unicorn 3002 will listen and transmit It is the base RTP port for channel 0 When configured c
41. setto Yes will function as the Re Dial key Dial Plan No do not send SUBSCRIBE for Message Waiting Indication Yes send periodical SUBSCRIBE for Message Waiting Indication 9No OvYes caller ID will be blocked if setto Yes 9No OYes Session Expiration 180 in seconds default 180 seconds SUBSCRIBE for wyl Send Anonymous Anonymous Call Rejection Min SE 90 in seconds default and minimum 90 seconds i Caller Request Timer No O Yes Requestfor timer when making outbound calls 6723 rate 6 3kbps encoding rate O 5 3kbps encoding rate iLBC frame size 020ms 30ms iLBC payload type 97 between 86 and 127 default is 97 G726 16 Payload Type 100 between 96 and 127 defaultis 100 G726 24 Payload Type 99 between 96 and 127 default is 99 G726 40 Payload Type 103 between 96 and 127 default is 103 il G729E Payload Type 102 between 96 and 127 defaultis 102 AD 9No O Yes Symmetric RTP ONo OYes Fax Mode T 38 Auto Detect Pass Through Fax Tone Detection Mode Ocaller 9 Callee Jitter Buffer Type Fixed O Adaptive Jitter Buffer Length Low OmMedium High END USER SETTING Settings Options Meaning This defines the encoding rate for G723 vocoder By default G723 Rate 6 3kbps rate is chosen i iLBC frame size This sets the iLBC size in 20ms or 30ms
42. t value is 255 255 255 0 LAN DHCP Base IP Base IP for the LAN port which functions as a Gateway for the subnet Default value is 192 168 22 1 DHCP IP Lease Time Value is set in units of hours Default value is 120hr 5 Days The time IP address are assigned to the LAN clients Forward all WAN IP traffic to a specific IP address if no DMZ IP matching port is used by Unicorn 3002 itself or in the defined port forwarding Port Map Forwards a matching TCP UDP port to a specific LAN IP address with a specific TCP UDP port End User Password This contains the password to access the Web Configuration Menu This field is case sensitive Reply to ICMP on WAN port If set to Yes the unicorn3002 will respond to the PING command from other computers but it also is vulnerable to the DOS attack Default is No Wan Side Http Access If this parameter is set to No the HTML configuration update via WAN port is disabled Copyright 2008 Hanlong Technology Co Ltd Page 16 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru HANLONG Unicorn3002 User Manual 6 1 6 3 Super Options Admin Password purposely not displayed for security protection Home NPA Layer 3 QoS 400 Diff Sery or Econ value Layer 2 QoS 802 1 Q VLAN Tag 0 802 1p priority value 0 0 7 STUN server is URI or IP port ke
43. the outbound proxy If there is no outbound proxy this field SHOULD be left blank If not blank all outgoing requests will be sent to this outbound proxy NAT Traversal This parameter defines whether or not the Unicorn3002 NAT traversal mechanism is activated If activated by choosing Yes and a STUN server is also specified then the Unicorn3002 performs according to the STUN client specification Using this mode the embedded STUN client will detect if and what type of firewall NAT is being used If the detected NAT is a Full Cone Restricted Cone or a Port Restricted Cone the Unicorn3002 will use its mapped public IP address and port in all of its SIP and SDP messages If the NAT Traversal field is set to Yes with no specified STUN server the Unicorn3002 will periodically every 20 seconds or so send a blank UDP packet no payload data to the SIP server to keep the hole on the NAT open SIP User ID SIP service subscriber s User ID Authenticate ID SIP service subscriber s Authenticate ID Can be identical to or different from SIP User ID Authenticate Password SIP service subscriber s account password Name SIP service subscriber s name which will be used for Caller ID display Use DNS SRV Default is No If set to Yes the client will use DNS SRV for server lookup User ID is Phone Number If the Unicorn 3002 has an assigned PSTN telephone number this field should be
44. try to recover the call The busy tone is just to indicate to the transferor that the transfer has failed 3 Busy tone keeps playing This means the Unicorn 3002 has failed to receive the second NOTIFY signal from the transferee and decided to time out Note this does not indicate the transfer has been successful nor does it indicate the transfer has failed When transferee uses a device that does not support the second NOTIFY signal this will be the case In poor or unstable network scenarios this could also happen although the transfer may have been completed successfully 5 2 7 Attended Transfer Assuming that call party A and party B are in conversation Party A wants to Attend Copyright 2008 Hanlong Technology Co Ltd Page 9 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru Unicorn3002 User Manual Transfer party B to party C Party A presses FLASH on the analog phone or Hook Flash for old model phones to get a dial tone Party A then dials party C s number then or wait for 4 seconds Party A and party C now are in conversation Party A can hang Note When Attended Transfer failed and if party A hangs up the Unicorn 3002 will ring party A again to remind party A that party B is still on the call by pressing FLASH or Hook again will restore the conversation between party A and party B 5 2 8 Hunting Group This feature allows user to setup a sin
45. ver IP address Enter 12 digit new IP address 14 Configuration Server IP Announces current Config Server Path IP Copyright 2008 Hanlong Technology Co Ltd Page 6 of 31 http arttel ru shop voip shlyuzy golosovoj shlyuz hanlong unicorn 3002 http arttel ru AE HANLONG Unicorn3002 User Manual Address address Enter 12 digit new IP address 15 Upgrade Protocol Upgrade protocol for firmware and configuration update Enter 9 to toggle between TFTP and HTTP 16 Firmware Version Firmware version information 17 Firmware Upgrade Firmware upgrade mode Enter 9 to rotate among the following three options 1 always check 2 check when pre suffix changes 3 never upgrade 47 Direct IP Calling Enter the target IP address to make a direct IP call after dial tone See Make a Direct IP Call 99 RESET Enter 9 to reboot the device or Enter MAC address to restore factory default setting See Restore Factory Default Setting section Invalid Entry Automatically returns to Main Menu Other Menu Prompt Features By pressing on the analog telephone you can access the voice menu gt shifts down to the next menu option gt returns to the main menu 9 functions as the ENTER key in many cases to confirm an option gt All entered digit sequences have known lengths 2 digits for menu option and 12 digits for IP ad
Download Pdf Manuals
Related Search