Home

DVR461&N manual

Contents

1. 2 Press H Menu Button to save all changes and go to the previous page Password Setup This DVR allows users to input 4 numerical digits as the system password DVR asks for password when users try to release KEY LOCK function and stop recording The factory default password is 0000 PASSWORD SETUP NEW kK CONFIRM SELECT NUMBER 0 9 PASSWORD IS APPLICABLE TO STOP RECORDING AND DISABLE KEY LOCK MENU EXIT ENTER SAVE Press Key Pad to set the password Refer to the following table Use to move backward to correct Type in both NEW and CONFIRM fields Press 2 to validate the new password SL AR IN A Press lhl Menu Button to validate the new password and go to the previous page Key Pad Indication 42 CH1 gt 1 CH2 gt 2 CH3 gt 3 CH4 gt 4 QUAD gt 5 PIP gt 6 SEQ gt 7 gt 8 NOTE The universal password is QUAD SEQ Pause QUAD 5785 VGA Setup VGA OUTPUT SETUP VGA RESOLUTION 1024X768 60HZ CHANGE VALUE ENTER APPLY CHANGE MENU SAVE AND EXIT 1 Use or key to cycle through available values 640 480 60Hz 640 480 75Hz 800 600 60Hz 800 600 75Hz 1024 768 60Hz and 1024 768 75Hz 2 Press to apply change 3 Press Ed Menu Button to save all changes and go to the previous page 43 PTZ Setup PTZ SETUP ID 01 PROTOCOL PELCO D BAUD RATE 2400 SELECT FIELD CHANGE VALUE MENU
2. 8X shows the playing speed Users can press button gt 44 to do fast forward fast rewind of the playback Multiple press of the button can do fast forward fast rewind of the playback at different speeds the speed order is x2 gt x4 gt x8 gt x2 gt x4 gt x8 gt x2 When reaching the end of the video it shows PB END next to the operation type Advanced Playback Operation This DVR provides an advanced playback function by playing back video stream frame by frame and 1 2 speed playback 1 2 speed playback A Press Il B Press to do 1 2 speed of playback Or press 44 to do 1 2 of rewinding playback Frame by frame playback Press ll Then press Il again to do frame by frame playback To do rewind frame by frame users must set the DVR in rewind play and press Il gt Then press Il again to do frame by frame rewind 23 DVR Menu and Setup Press Ed Menu Button to access main menu CAMERA VIDEO SETUP Basic key indication Use 1 and button to select each section Press 4 to go to the section Press H Menu Button to exit the last page or go to Live View mode When exiting any sections DVR will save the changes NOTE TCP IT SETUP option is only available for LAN model DVR Camera Video Setup Under CAMERA VIDEO SETUP users are allowed to name their cameras to adjust video quality to set up motion
3. DDNS State O ON OFF Domain Name User ID Password DVR Setup System Here the settings of Time Camera HDD etc can be modified in this page Time Year 2007 Y Month 10 Day 26 Y Hour 9 Y Minute 56 Y Second 34 Y Time Fortmat YMD Y Choose each field to current time and click Set to apply change Get DVR Time is used to retrieve DVR s time setting Camera E Channel mid Title 4 Please enter four characters with A Z 0 9 SET gt g Load System Default d Each Camera channel s setting can be changed here including Tile Brightness Contrast Saturation and Hue The button at the top part is used to select channel Users can drag the red triangles to change values for each attribute Reload button is clicked to load the setting before dragging from DVR Press SET to apply 61 changes and Load System Default is clicked to return to factory default setting HDD Infomation Record Mode Once Recycle Get Current Settings Here shows the information on HDD in DVR Users can change Record Mode to Once or Recycle Click Set to apply change and press Get Current Settings to retrieve current value for it from DVR Alarm Input Alarm Input ID 4 Status NO Output ON wi Ful OFF w a a Get Current Settings _ Settings lf users have alarms inputs set up the settings can be modified in this section Click Set to apply changes and pres
4. to cycle through available values 3 Highlight APPLY and press to apply the new setting 4 Press 4 Menu Button to go to the previous page NOTE Before setting up please identify the network connection of the DVR STATIC IP Public Static IP Connection Len bode LT Pu l a fij T IE 642 a te hash Es ABD ean 4 _ SS EN gt a da ra ng i E A ci pl La 1 wit a ii A oe a IEEE oa 7 a E T Ale j aA Fa a 15055 eh E f C O as Jon L a E VR WITH A ps F ae had NETWORK ae i ULE F iil E BROWSE A e l ANALOG qe i AS 4 a yt EH ra al gt l Pub I H F a ete Ss j 114 51 n EES E R Ri SER dl 2 E a Er A gt EA 2 ae K RE A DS F Ed j So ee rana i JRW Fogo F We WITH if oa NET WORK EEE Wane pr i m A E WA UL E zi slal Bhs PEs rs i AH ALE 1 7 mor a r A TAS Static IP is considered as a fixed IP assigned by ISP Public IP or IP share device Virtual IP DVR connecting to static IP needs to be assigned IP address Gateway and Subnet mask 37 DHCP The DHCP functions needs to be supported by a router or a cable modem network with Dyn amie F Configuration PORT 40 i IP 192 168 1 1 3 MASK 255 255 255 0 DONS Server DONS settingen Router ak IEBROWSER AP aun P i NETWORK aL a IEBROWSER PH ig Modern a a Y En OVR WIH E Es NETWORK p oats Y MODULE Private static IP IE BROW
5. 12vV0C AC DC adaptor power outlet 16 Power On DVR NOTE Factory default setting of video format NTSC PAL is in accordance of the importing country standard If you are using this DVR in different video format standard areas Initial Screen Above message window appears on the monitor when DVR is turned on After DVR has finished initializing a quad live view is displayed on the screen Key lock function is also activated To disable the key lock press the MENU button HH and enter the password The default password is 0000 NOTE Live View QUAD Mode A DISK SPACE amp RECORD FPS B CHANNEL NAME amp RECORDING STATUS E o C RECORDING INDICATION D RECORDING MODE E CURRENT DATE A DISK SPACE amp RECORD FPS 98 FREE means HDD is still 98 empty The number keeps going down if DVR keeps recording lt shows 99 FREE when HDD is formatted JPEG is the recording format 30P indicates the recording frame rate and DVR records 30 frames per second fps The very last R means RECYCLE mode and it shows O if itis ONCE mode B CHANNEL NAME amp RECORDING STATUS CAM2 is the name of this channel A red dot appears when the channel is recording C RECORDING INDICATION REC appears when DVR is recording any channel D RECORDING MODE It indicates which recording mode is working CON means Continuous Mode MON stands for Motion Detection Mode and AL
6. Audio Input Output Video Output to Monitor TV Power Output for the Camera Video Input for the Camera Alarm Sensor PTZ l O Platform VGA Output DVR Main Power Input 13 Video Input Output Connection Connection Illustration TO DVR VIDEO OUTPUT DVR LAN MODEL ONLY TO DVR AUDIO OUT AUDIO RCA MALE TO TV MONITOR AUDIO IN Plug IR amp Remote Play Control 2 Cae TO DVR POWERIN POWER C Hi TRANSFORMER VGA MODEL ON LY teo BNC TO RCA CONVERTER 14 Sensor Installation The DVR has 4 sensor inputs one for each channel The sensor Installation procedure is as the following Connect the sensor signal line to the unit The sensor signal terminal is on the DVR rear panel ll Connect the sensor adaptor jack into the sensor and plug in the power adaptor E SENSOR ALARM CH1 CH2 CH3 CH4 Alarm out CAMERA POWER SUPPLY PORTS AD AC DC adaptor power outlet 15 Alarm Installation The DVR includes one internal switch for sounding an alarm when any of the sensor inputs is activated The switch is normally open and closed upon activation The circuitry is shown in the above figure The alarm is installed as follows The alarm requires a power supply which is normally supplied with the alarm ll Connect the alarm power line to the alarm switch terminal on the rear of the DVR CAMERA POWER SUPPLY PORTS
7. My Cart Log Out D J lt g Z UN BE THE KING IN YOUR CASTLE Many more Dynamic DNS domains now available DNS Services DNS for static and dynamic IP addresses MailHop Services Ensure reliable mail delivery Network Monitoring Monitor your online services 24x7x365 SSL Certificates High quality digital certificates FIRST PowerKnights Team 501 Gets Power Boost from Local Business Resources Services Support About Us What is DNS Custom DNS Update Clients Search Home Solutions Dynamic DNS 24 7 Premier Support DynDNS Careers Business Services E Mail Relay Developer s Info Contact Us To use DDNS service we have to create an account first Click Create Account under the Login button gt Dynect gt TLDDNS gt Corporate Lost Password Create Account ene Dynamic DNS DNS Services nearly 10 years Custom DNS Dynamic DNS DDNS allows you to create a hostname that points to your dynamic IP or static IP address i Dynamic DNS or URL We also provide an update mechanism which makes the hostname work with your dynamic IP pO RS css Readme address We continue to offer this service free to the Internet community as we have done so for Manage Hosts How To Account Upgrades Standard Domains Premium Domains Recursive DNS Secondary DNS Domain Registration SSL Certificates MailHop Services Network Monitoring URL Forwarding Pricing Search Capabilities and Feature
8. Time Bar Quick search to certain time point Channel Display Buttons 52 select certain channel for viewing Quad View Nine Channel View Sixteen Channel View Audio and Volume lf users use audio in with the DVR they can adjust the audio channel and volume err 1 Click the buttons of Audio Select to select audio channels 2 Draw the volume bar to adjust the volume P Users can mute the audio by pressing the mute buttonl Save to JPG Users can save the video screen to a JPG file E i 1 Click and it shows a Save as dialog box 2 Select destination path and type the file name 3 Press Save button to save the picture Save to AVI Users can save any certain period of the video to an AVI file EN Click cs and there shows a Time Selecting Dialog 53 Create File Select Channel 102 SetStart 2007 12 19 10 41 51 SetEnd 2007 12 19 11 19 10 A Set AVI Quality _ Set Create Mode Output AVI File set Path CAProgram FilestDVRPlayenBacl Set File Name 20071219 104151 avi Create File Start Time f End Time Select Bar ED J search Time 2007712719 11 00 57 1 Select the channel to record 2 Draw the time line bar to the time point you want to begin and press t3tart to set Start Time 3 Draw the time line bar to the time point you want to end and press tEnd to set End Time Choose the image q
9. electronics line uk Professional 4CH Stand Alone DVR DVR EZPRO DVR EZPRON User Manual Taki ge 2 A e Pre o io A 6 Package COMES ini 6 SDECIICAUON ico a celica 7 installation ana EXCHANGE Ol ADD scale eovubiaada toalla 8 Bla o Da pl Froga Miena na sacri eee treaties rae ares ahs 9 WIE FON sr ANE PPP A 11 DVR Roar PaO adan lll too e E 13 Video INPUT OUTDUE CONNEC UO oases it iii 14 SENSO IAS AMAN a 15 llo AAA A nn E 16 OWEN IA A eee ee eee ee 17 A mtn enn tral emt SI A nn tent tment tent 17 EIC OWN Ea ooo 17 DISDIAY MOJO sueno trab odo sobre 19 sa ee e oa 19 FICUS FICUS PIR iii ei idad taa 19 Sequence VIW ssts tds 20 Slingle Cannel V CW nena E a 20 e E E 20 A A 21 IMSS Sato aaa 21 A PI 22 Playpack OPEO Meaca 23 Advanced Playback OPE Messina iii 23 DUERME Aa do CU dai 24 Camela VIdeo US 24 TUS SEUD asara aa EEE seas 25 As OEN E EI A A T EA AET A ATE E EE AE TT 25 WIOUO MU CVS CUON aan apenas 26 DIALS CC lancer O 27 NTSC PAL SOU crac co daa 27 BIELE EIKO EE e ne ee 28 Record Mode SUD iii 29 Soto AA E ue aaaseetaaitetesatane tesa teteeasaeetos 29 Recording A e o N III 30 MOTOR ECONO Se mtn ton elude abultada 32 o rec chctcetctec hectic a tice ected ctictecelclae betcha 33 e A ar ete erin aay Arar enn O 33 A ee pce elena a e no O ete cia hence oe eae eee eteceeceeeeeece 34 Be A Gonna eee teen a een eo at A 35 TCP IP SETUP Only for DVR EZPRON Model sninn 36 lo A O ine ann ee meen eee 39 BUZZ
10. em pese IS EAS ofewn pese IAS EAS Tes a 192 1681192 Video sever gt 0 ms eee e es Eee as pozis vieosemer Pf e razas 168 1 192 VideoSemer gt gt The log of DVR operations will be kept in this page 65 Central Management System Only For DVR EZPRON Model CMS is the software that manages up to four DVRs in one screen at the same time The installation file of CMS is in the CD provided with DVR Click CMS Central Management system on the menu to run installation procedure E After installation double click CMS icon to run it S A login window will pop up and ask for Account and Password The default account and password is root root When correct account password is entered the main screen of CMS will show up no Central Management System Y t E f o J d Ll a a Das 3 a me me id T Ta w gt A 2008 02 02 09 29 07 192 168 0 75 Video Server mi Hea 4 NETWORK SETUP DVR SETUP EVENT LOG Basic Controls The time box at the top right corner displays current system time A aes J buttons at the top left corner control respectively Exit CMS Full Screen and Minimize to Toolbar In the middle of the screen shows the live view of each DVR At the bottom of the screen it is a message panel Event messages will show here 66 mr ld Panel fave 1 e a a s butt
11. or key to choose each section and press 2 to enter RECORD SETUP CONTINUOUS RECORD MOTION RECORD ALARM RECORD SELECT ITEM ENTER SELECT SUB MENU MENU EXIT 28 Record Mode Setup RECORD MODE AM RE OL ES SUN CCCCCCCCCCCC SAT 0 07 07 07 07 0x 07 0X 07 CCC 07 07 07 0x 07 0x 0 0X 07 CCC 07 07 07 0x 07 0x 07 07 07 0 0x 0 07 07 07 0x 07 0x 07 07 07 0 0x 0 07 07 07 07 07 0x 0 0X 07 07 0X 0 07 07 07 0x 07 0x 0 0X 07 07 0x 0 PM 0 3 6 9 07 07 07 0x 07 0X 0 07 07 0 0x 0 07 07 07 0x 07 0x 07 0X 07 0 0x 0 07 07 07 0x 07 6 0 0X 07 0 0x 0 0 07 07 07 07 0x 07 0X 07 CCC 07 07 07 07 07 0x 07 0X 07 0 0x 0 0 07 07 07 07 0x 07 0X 07 0 0x 0 07 07 07 0x 07 0x 0 07 07 CCC 1 lt SELECT FIELD CHANGE VAULE MENU SAVE AND EXIT 1 Use ft or key to select each time cell Press or button to cycle through available record modes Available record modes are C Continuous M Motion Detection Recording A Alarm Sensor trigger recording N None 2 Users may do fast set up by pressing twice For example move the cursor to Sunday row and choose any cell s record mode to M Press twice and the entire time cells of Sunday become M record mode 3 Press LA Menu Button to save all changes and go to the previous page NOTE DVR stops recording when DVR is backing up or linking to PC through USB Conti
12. FOC ONG enr seis eaaie O a a a taiclaad tis xq slaagine S 63 PUNO MOG el UNO Greet acetate e 64 AUTO 200 END Sussie lado nidad 65 AUTO LOG US errar ao 65 Central Management System CMS Only For DVR EZPRON Model cccoccccoccccoocooo 66 Basic COMMONS css a 66 DVR Management ANG esecoiaccsivedatendsavedandyadelandsanelouduagebeuesenadeuanesaenanetaranexenenanevanccm 67 Recording and Cantino Fan kennesanen ta a ees 68 CONNgUrAION P ANE isi tes eres E E E EER 68 INCIWONE GCD mere eer ienien aE aR aA 68 PYE A 71 VS OC ease A 76 AA EE AT EA E A A A A A AA E 76 ADOUE serca a a a a aE 76 PIAR ads 11 A 77 DVR Finder Only For DVR EZPRON Model cccccooccccccoccncccoccnnccccccnccnoconccnoncnnonononnnos 78 DDNS Only For DVR EZPRON Model c oooccccccccccncccoccncccoccncocononccconconcnnoconcnnononnononennnss 79 PAO OC INOIK ONO PA E A O 83 IFOUDIESGOOUNO soma ares 83 Regulatory FCC Certification This equipment has been tested and found to comply with the limits for a class A digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment ina residential area
13. SAVE AND EXIT PTZ supports PELCO D and PELCO P protocols Baud Rate supports 2400 4800 and 9600 Date Time Setup Users can adjust date and time settings in this section DATE TIME SETUP FORMAT YEAR 2007 MONTH 07 DAY 06 HOUR 17 MINUTE 16 SECOND 24 Y SELECT FIELD CHANGE VALUE MENU SAVE AND EXIT Press ft or to select each field to modify 2 Use or key to cycle through available options 3 After adjustment press m Menu Button to save all changes and go to the previous page Format is the date format that shows on the live view Available values are YY MM DD MM DD YY and DD MM YY 44 Hard Disk Setup Users are allowed to view HDD information format HDD and choose HDD recording mode Use 1 or key to choose each section and press to enter HARD DISK SETUP HDD FORMAT RECORD MODE RECYCLE RECYCLE OVERWRITE HDD ONCE STOP RECORDING WHEN HDD FULL ENTER SELECT SUB MENU SELECT FIELD CHANGE VALUE MENU SAVE AND EXIT Hard Disk Information It shows HDD model number and size HDD INFORMATION HDD1 MASTER MODEL ST34016A SIZE 160 0 GBYTES Press HH Menu Button to go to the previous page 45 HDD Format HDD FORMAT SELECT HDD 01 CONFIRMATION NO SELECT YES AND PRESS ENTER TO FORMAT HDD SELECT FIELD CHANGE VALUE MENU EXIT 1 Change NO to YE
14. 54 System Message Start event message ask 2007 10 29 12 51 24 System Message End event message ask 2007 10 29 12 51 20 192 168 1 192 Messaqge 2007 10 29 12 51 19 192 168 1 192 Message 2007 10 29 12 51 19 192 168 1 192 Message 2007 10 29 12 51 18 192 168 1 192 Message 2007 10 29 12 51 18 192 168 1 192 Message 2007 10 29 12 51 18 192 168 1 192 Message 2007 10 29 12 51 18 192 168 1 192 Message 2007 10 29 12 51 18 192 168 1 192 Message 2007 10 29 12 51 17 192 168 1 192 Message 2007 10 29 12 51 17 192 168 1 192 Message 2007 10 29 12 51 16 192 168 1 192 Message 2007 10 29 12 51 16 192 168 1 192 Message 2007 10 29 12 51 15 192 168 1 192 Message 2007 10 29 12 51 15 192 168 1 192 Message MIT NINO 19664014 109 152 1 10 VMacezna CMS Setup CMS login account can be changed here by filling Account Password and Confirm CHOO_Record_Off 07 10 29 12 52 04 CHOO_Record_On_07 10 29 12 51 53 CH04 _Motion_Detection_07 10 29_ 12 51 53 CHOO_Record_Off_07 10 29_12 39 37 CHOO Record _Gn_07 10 29_ 12 39 26 CHO4_Motion_Detection_07 10 29_ 12 39 26 CHOO_Record_Off 07 10 29 12 37 54 CHO4_Motion_Detection_07 10 29_ 12 37 38 CHO0_Record_On_07 10 29_12 37 28 CH04_Motion_Detection_07 10 29_ 12 37 28 CHOO_Record_Off 07 10 29 12 33 40 CHOO_Record_On_07 10 29 12 33 29 CHO4_Motion_Detection_07 10 29_12 33 29 CHOO_Record_Off 07 10 29 12 05 19 CHAN Derard Mn MF 10 N0a 1nNENO Ac
15. Below picture appears on the screen when entering playback mode SEARCH EVENT SEARCH SELECT ITEM ENTER SELECT SUB MENU MENU EXIT This DVR provides two playback search functions they are TIME SEARCH and EVENT SEARCH Use 1 or key to select playback function and press to enter each function In playback mode press 11 to pause Then press QC to activate Quick Copy function for backing up video to the flash drive Quick Copy will back up two minute video from the time point or backup the whole event Time Search TIME SEARCH YEAR 2007 MONTH 07 DAY 15 HOUR 02 MINUTE 52 BEGIN 07 06 24 01 50 END 07 07 21 14 31 lt SELECT FIELD CHANGE VALUE ENTER RUN MENU EXIT 21 BEGIN is the time the DVR starts to record END is the time that the DVR stops recording Use 1 and key to select year month day hour and minute Use or key to cycle through all available values When the time is confirmed press to view the playback Press NW to end the playback and return to LIVE VIEW Press H Menu Button to start a new search Press Il to pause the playback Event Search EVENT SEARCH PAGE 001 YY MM DD_ HH MM SS A PAGE NUMBER 006 07 08 11 07 08 11 07 08 11 07 08 11 07 08 11 07 08 11 07 08 11 11 15 20 11 15 45 11 17 02 11 22 11 11 33 12 11 34 11 11 35 55 B EVEN
16. DNS records to 5 DNS servers in 5 tier 1 datacenters around the globe URL Forwarding Our free industry leading e mail support is ready to help you setup your dynamic or static DNS so you can host a website remotely Pricing connect to your machine and run a mail server We also offer other premium features with our Account Uparade service Type the hostname you like and choose a domain name Click Use auto detected IP address link it fills your current IP automatically D D N S Logged In User EugeneHuang y n My Services My Cart Log Out My Account z e _ Add New Hostname Host Services My Services A eari Note You currently don t have Account Upgrades in your account You cannot use some of our Host Service features Please consider ccoun races a si buying Account upgrade that make this form ful functional and will add several other features Learn More Premier Support Ta Zone Services Hostname digiview _dvidns org v TEEL QE SEE Wildcard Yes alias hostname domain to same settings MailHop Outbound i Service Type Host with IP address Recursive DNS WabHon Rediect Network Monitoring O Se D de ES SSL Certificates O OS Renew Services e Auto Renew Settings Sync Expirations IP Address AECI SOS TTL value is 60 seconds Edit TTL Billing My Cart Mail Routing C Yes let me configure Email routing A 0 items Te Finally press Create Ho
17. JPEG 30 EVENT RECORD TIME 10 SEC PRE RECORD ON 1 SELECT FIELD CHANGE VALUE MENU SAVE AND EXIT 1 Press or button to cycle through available values They are SUPER HIGH NORMAL STANDAR SUPER is the highest video quality and STANDARD is the lowest video quality 2 Use T or key to highlight RECORD FPS and press or button to cycle through available values The available values of FPS for MJPEG are 1 2 4 8 15 and 30 30 is for the most fluent recording and consumes HDD space the most The available values of FPS for MPEG4 are 2 4 8 15 30 and 60 3 Use ft or key to highlight RECORD TIME and press or button to cycle through available times They are 10 20 30 40 50 and 60 seconds A record time of 10 seconds means DVR will record for 10 seconds after the motion is detected 4 Use T or key to highlight PRE RECORD and press or button to turn ON OFF the Pre Record Pre record records around 4 sec video before the motion is detected 5 Press ll Menu Button to save all changes and go to the previous page 32 Alarm Record ALARM RECORD RECORD QUALITY SUPER RECORD FPS JPEG 30 EVENT RECORD TIME 20 SEC PRE RECORD ON 1 4 SELECT FIELD CHANGE VALUE MENU SAVE AND EXIT 1 Press or button to cycle through available values They are SU
18. Specifications Item No DVR EZPRO DVR EZPRON Video Input Format NTSC PAL Video Input Channel 4CH Composite Video Output Channel 2CH BNC amp VGA Optional Audio Input 2CH In 2CH Out RCA Motion Detector Yes Remote Control Interface Yes USB Serial Port PC Link Yes Built in Buzzer Yes Display Mode Each Quad PIP Sequence Display Frame NTSC 120 fps PAL 100 fps Recording Frame Rate quad mode PAL Max 25 fos MJPEG 50fos MPEG4 Recording Frame Rate each mode PAL Max 6 25 fos MJPEG 12 5fos MPEG4 Recording Mode Continuous Motion Detection and Alarm Event All modes can be triggered by schedule Resolution Display NTSC 720 x 480 PAL 725 x 576 Resolution Recording NTSC 704 x 480 PAL 704 x 576 Compression Format Modified M JPEG MPEG4 H 244 Video Compression For H 264 DVR Model Only HDD One HDD Rack Search Mode Time Event Motion Alarm Video Loss Network Protocol DVR EZPRON only TCP IP Ethernet DVR EZPRON only RJ 45 10M 100M Browser DVR EZPRON only IE 5 0 or above version OS Windows 2000 XP Vista Recording Software Yes Video Adjustment Yes Watch dog Function Auto Recovery Capability After Power Outage Dimension 290mm x 300mm x 56mm Weight Without HDD 3 8kg Specifications are subject to change without pr
19. Time Year 2007 Month 10 Day 23 Y Hour 14 v Minute 46 vi Run Start Time 2007 10 23 14 46 Run End Time 2007 10 25_15 45 ERE A ee eee Channel Users can change to see different channel or Quad mode by click the buttons Display Users can change the solution of the live view L is the largest where S is the smallest search Time Users can review video at a specific point Click Run to review Star Time It indicates the very beginning of the recording Click Run to review it End Time It indicates the end of the recording Click Run to review it Control Buttons In the bottom row there are control buttons to operate fast rewind rewind pause forward fast forward and stop Click STOP to exit playback mode NOTE When starting Playback DVR will stop recording and enter playback mode synchronously Event List The table here lists event recordings on DVR Users can examine the event happening Herr A MEE the button on veacn event to start the playback No Type Channel Year Month Day Hour Minute Second Playback a IM 34 2008 00115114136 16 7M 22008 02 E H 6 5 31M 22008 02 115 14 25 38 4 M 2 2008 02 115 14 25 38 2008 02 115 14 24 57 Ln r i a Heese 57 Network Setup Server In this section users can manage network accounts upgrade DVR firmware and set up email notification Account Administrator User Account l Password Set HE A
20. detects video loss of any channels 4 When ALARM EVENT is on DVR beeps when external installed alarm sensor trigger is activated 5 When MOTION is on DVR beeps when it detects motion detection 6 Users can select the length of buzzer time after the events Press or key to cycle through available values from 1 60 seconds 7 Press HH Menu Button to go to the previous page 39 NOTE TIME DURATION IS ONLY FOR MOTION ALARM AND VIDEO LOSS EVENTS Alarm Setup This DVR is capable of installing four external input alarm sensor devices and one output external alarm device Use t or key to choose each setup section and press H to enter it ALARM SETUP ALARM OUTPUT ENTER SELECT SUB MENU SELECT ITEM MENU EXIT Alarm Input Setup ALARM INPUT SETUP ALARMIN STATUS OUT FULL 1 NO ON OFF 2 NO ON OFF 3 NO ON OFF 4 NO ON OFF FULL CHANGE CHANNEL TO FULL SCREEN WHEN TRIGGERED lt gt SELECT FIELD CHANGE VALUE MENU SAVE AND EXIT This DVR can accept four alarm sensor inputs 1 Press 1 or to highlight each channel s alarm setup options 2 Use or key to cycle through available options 3 Press Menu Button to save all changes and go to the previous page 40 STATUS NO Normal Open means the external alarm sensor device is short cir
21. drive and paste the updated firmware file to the USB drive Remove USB memory stick from PC properly and connect to DVR USB Master Host plug Use tor to highlight Firmware Upgrade section and press or to choose YES Press to run the upgrading After the loading is completed press Wto exit Pan Tilt Zoom Control The DVR can control speed dome cameras through the RS485 interface To enter PTZ Control Mode select the channel with the soeed dome camera by pressing Channel Buttons a OY and press Pause EP To quit PTZ Control Mode press Pause E again Key Definition in PTZ Control Mode Enter Quit PTZ Control Mode Auto Pan Tilt Up Tilt Down Pan Left Pan Right Zoom In Zoom Out Set Auto Pan Start Position set Auto Pan Stop Position 48 PC Player Program TOS AS Nany Audio Select y Ny s sie A Information v6 45 e System aer Time End Time EKE EEEREN Y TEED DVR Player supports DVR series from 4CH to 16CH It plays videos recorded on the DVR takes screenshots and prints screen through a printer Install PC Player Program 1 Insert the CD provided in the package to the CD ROM 2 Click DVR PC Player on the menu to install Recommended Screen Resolution 1024x786 3 Select your destination directory and click OK Connect DVR to Computer 1 Use the USB cable provided in the package to connect DVR and the com
22. if Confirm Number 0 9 only Information Information page shows the firmware version of the DVR and users can click Set DVR to Default to have the DVR return to factory default settings Time Camera Buzzer HDD Alarm In Alarm Out Sequence Password Information Record MessageType Event Schedule Set Information Stork Light Version os Merlin Version 025 ooo Jays Version ET Record Users are able to adjust the compression format recording frame rate quality and recording length Options to enable disable pre record for motion detection and alarm trigger are available Time Camera Buzzer HDD Alarm In Alarm Out Sequence Password Information Record MessageType Event Schedule Set Record Format Frame Rate Quality Record Time Pre Record Continuous Pee y 30 y Super Active New Setting Message Type Users can choose which messages will be sent to the email account when it s triggered 74 Time Camera Buzzer HDD Alarm In Alarm Out Sequence Password Information Record MessageType Event Schedule Set Mesas Type Y Motion Detection Y Record Off e Alarm In jw Video Loss M Power On W Hard Disk Fail M Record On IY Hard Disk Full Active Mor Betting Event This page displays the event log on the DVR Time Camera Buzzer HDD Alarm In Alarm Out Sequence Password Information Record Message
23. is likely to cause harmful interference in which case the user will be required to correct the interference a their own expense CE Mark This product is marked with the CE symbol and indicates compliance with all applicable EEC directives Introduction This system is a professional and easy installation surveillance and security system designed for small offices restaurants and house owners Connect any four DC 12V powered CCTV cameras to the DVR Digital Video Recorder and enjoy various functions such as recording retrieving and network monitoring only available for Network Model video images The professional DVR implements the latest smart recording technology which enables the DVR to determine the incoming signals of each channel camera for recording purpose If there is no video signal coming from one channel the DVR does not record that channel s video therefore it does not waste HDD space The DVR also allows users to enable or disable recording of each channel Its pre recording function is capable of catching the entire events without missing how the events are happening Through USB devices the DVR provides very convenient methods to back up video streams to USB flash disks and PCs not compatible with Apple systems Package Contents Stand Alone DVR Unit IR Remote Control x1 DVR Network DVR x1 CD x1 USB Cable x1 BVA VidewOurm Gest eer DVR Power Transformer x1 Items are subject to change
24. otherwise be easily guessed Confirm Password peca About You optional Providing this information will help us to better understand our customers and tailor future offerings more accurately to your needs Thanks for your help us Details g Done www dmdns com B Login with your account and go to Services page Click Dynamic DNS link D D N 6 Logged In User EugeneHuang y n My Services My Cart Log Out Pee Services DNS Services We offer you superior domain name services DNS high quality domain Domain Registration management world class e mail services web redirection and network monitoring All of our services include free technical support by e mail or l E Jode A ear g ae hy DynDNS why you shoud choose us Technology Overview a pe behind thi x SRNR E rae NA A aS e he Sake ra SSL Certificates L phone where you speak to a highly trained engineer rather than a call center MailHop Services reading a script off of a screen gt Te A Network Monitoring f DNS Services URL Forwarding Pricing p dd My Cart Nag of O tems 4 Be Kath Dynamic DNS Custom DNS Recursive DNS Secondary DNS l A free DNS service for those Our dynamic and static DNS Ensure DNS resolution for your Add reliability to your own with dynamic IP addresses management tool for your DNS queries nameservers own dom
25. CP Enable box and oush Active New Setting button to set DVR using DHCP Network DDNS Server Set Network Nat Type DHCP ad IP Address 192 1 i Mask Address 255 2 Getway Address 192 1 DNS 1 Addorss GS eos 8 DNS 2 Addorss 0 0 0 0 DHCP Enable Active New Setting lf the network environment is using PPPoE users can enter the ID and password in the PPPoE setting page lo apply settings check PPPoE Enable box and press Active New Setting button 69 Network DDNS Server Set Network Nat Type PPPoE w PPPoE User ID PPPoE Password IP Address 192 1 Mask Address 255 255 255 0 Getway Address 192 1 E DNS 1 Addorss AS wm 8 cof DNS 2 Addorss CA ME 0 ah PPPoE Enable ae Active New Setting Network DDNS Server Set DDNS Domain User ID Password DDNS Enable Active New Setting In Server page users can set administrator and user account in the Set User page Network Dons Server Set Server Active New Setting upload firmware and reset default setting in the Set System page 70 Network DDNS Server Set Server Server Set System v Server Name FirmwareVersion Firmware Upload Browse Upload Default Set Re boot Server and set email address for notification in the Set E_Mail page Network DDNS Server Set Server Server Set E_M
26. H to run the formatting 3 Load PC Player allows users to backup video files to USB memory storage device and writing PC player program to it at the same time a 0290 0 h Format USB Note Users must format USB first Remove USB from DVR Master Host plug and connect to PC USB plug Insert the CD provided in the package Open Both USB storage and CD ROM discs Replace player program called PLAYER PAkK in the USB with PLAYER PAK in the CD ROM disc Remove USB memory stick from PC properly and connect to DVR USB Master Host plug Use tor to highlight Load PC Player section and press or to choose YES Press to run the loading After the loading is completed press MW to exit 4 Firmware Upgrade When there is available firmware released users can update DVR firmware via USB Please contact your local distributor for the updated firmware Note To avoid further confusions we name the firmware ROMCODE ISO 47 Save the firmware temporarily in the PC and follow below steps a e295 Format USB Note Users must format USB first Remove USB from DVR Master Host plug and connect to PC USB plug Open the USB storage device Locate the updated firmware saved on the PC usually called ROMCODE ISO Replace firmware file called ROMCODE ISO in the USB drive with ROMGCODE ISO saved on the PC Or delete ROMCODE ISO in the USB
27. M means Alarm Event Mode Users can change the setting of each mode and modify the schedule of recording for each Display Mode DVR provides four different live view modes QUAD View Picture in Picture Sequence View and Single Channel View Press Channel buttons QUAD PIP and SEQ buttons on the front panel to change the display mode 98 FREE JPEG 30P R QUAD View Quad View is the default view mode when DVR is turned on CAM3 CAMA4 CON 07 07 07 14 12 12 98 FREE JPEG 30P R Picture in Picture PIP PIP Mode allows users to view the primary channel and other three channels at the same time To select the primary channel press or buttons on the front panel CAM1 CON 07 Sequence View In Sequence View the screen displays through available channels at a certain interval Please refer to O REC Single Channel View Single Channel View shows one channel constantly Record This DVR is equipped with an intelligent recording system which automatically resumes previous recording setup and starts recording once the DVR is recovered from electricity Press button on the front panel to start recording If record mode is not set up a message SETUP RECORD shows on the screen Press W on the front panel to stop recording DVR will ask for the password to stop video 20 Playback Users can press gt gt button on the front panel to enter playback mode
28. PER HIGH NORMAL STANDAR SUPER is the highest video quality and STANDARD is the lowest video quality 2 Use T or key to highlight RECORD FPS and press or button to cycle through available values The available values of FPS for MJPEG are 1 2 4 8 15 and 30 30 is for the most fluent recording and consumes HDD space the most The available values of FPS for MPEG4 are 2 4 8 15 30 and 60 3 Use T or key to highlight RECORD TIME and press or button to cycle through available times They are 10 20 30 40 50 and 60 seconds A record time of 10 seconds means DVR will record for 10 seconds after the alarm is triggered 4 Use T or key to highlight PRE RECORD and press or button to turn ON OFF the Pre Record Pre record records around 7 sec video before the alarm is triggered 5 Press Menu Button to save all changes and go to the previous page NOTE Backup Setup This DVR provides two backup methods Users can back up video to PC via USB port or to USB memory storage devices It also copy the player program to USB memory storage devices so users can play the video on any PC Apple system is not supported without installing the player program PC Backup Note 33 1 PC operating system must be Windows 2000 or above 2 Install PC player program provided in the disc to the PC first Do not run the PC playe
29. Password Information Record MessageType Event Schedule Set HDD HDD 1 Information Model T3400832A Size 400 0 GB Free Size 371 5 GB HDD 2 Information Modal Size GB Free Size GB Record Mode Recycle e Activa Naw Setting Alarm In In this page users can change the settings for the alarm input 72 Time Camera Buzzer HDD Alarm In Alarm Out Sequence Password Information Record MessageType Event Schedule Set Alarm In Alarm In Number 01 z Alarm Status ho M Alarm Ovt1 lam Ont Alarm Full Active New Setting Alarm Out Users can set the settings for alarm output Time Camera Buzzer HDD Alarm In Alarm Out Sequence Password Information Record MessageType Event Schedule Set Alarm Out Alarm Out Number 01 z Active New Setting Sequence Sequence is the interval between cycling each channel The available values are from 1 second to 60 seconds Time Camera Buzzer HDD Alarm In Alarm Out Sequence Password Information Record MessageType Event Schedule Set Sequence Password Users can change the key lock password for the DVR Please note that only digits are acceptable The password length should be 4 digits 73 Time Camera Buzzer HDD Alarm In Alarm Out Sequence Password Information Record MessageType Event Schedule Set Password New Password
30. S and press key to format the HDD 2 Onthe screen it shows the percentage of the progress 3 After formatting HDD DVR goes back to the live view HDD Record Mode HARD DISK SETUP HARD DISK INFORMATION HDD FORMAT RECORD MODE RECYCLE RECYCLE OVERWRITE HDD ONCE STOP RECORDING WHEN HDD FULL ENTER SELECT SUB MENU SELECT FIELD CHANGE VALUE MENU SAVE AND EXIT 1 Press or button to cycle through available modes Available modes are RECYCLE and ONCE 2 Press li Menu Button to save change and go to the previous page RECYCLE gt DVR overwrites the HDD when HDD is full ONCE gt DVR stops recording when HDD is full 46 Factory Setup Users are able to set DVR to factory default setting format USB upload PC player to DVR HDD and upgrade the firmware of DVR in this section FACTORY SETUP 1 LOAD FACTORY DEFAULT NO 2 USB FORMAT 3 LOAD PC PLAYER 4 FIRMWARE UPGRADE ML204GK 012 JAYS 008 SKL 044 ENTER CONFIRM AND RUN 1 4 SELECT FIELD CHANGE OPTION MENU EXIT 1 Load Factory Default allows to restore DVR to its factory default setting Press or to choose YES Press 2 to run the loading 2 USB Format allows users to format USB before uploading player to HDD and upgrades firmware to DVR a b C Connect Memory Storage device to DVR USB Master Host plug Press or to choose YES Press
31. SER E 7 IP 132 168 1 1 5 CAMERAS Pa MASK 255 255 255 0 AN ALO PORT 80 PPPoE This PPPoE function needs to have one username and one password subscribed from setup EN O d E Ln 1 ae 7 aia DONS Sever e l gt ee Le IE BROWSER i F r s A al F af r F i 7 E a z F E F E i Y a A Sa ae a aan F Ja F gt aL i il a J if pe 250005 Pa LA IP NETWORK 2226056 ADSL De j IE BROWSER a if Modem cl DVR WITH dt i NETWORK OE MODULE IE BROWSER EER A II IS Pees a zi 7 oa i 1 Selet PPPOE or DHO Pif modem supports CAMERAS O he P aa 2 DDNS Configuration a DDNS ON b Doman Name DVR dyndns org UserID abedvr 4 Password 123456 Onnea 38 Peripheral Setup PERIPHERAL SETUP ALARM SETUP SEQUENCE SETUP PASSWORD SETUP VGA SETUP PTZ SETUP ENTER SELECT SUB MENU SELECT ITEM MENU SAVE AND EXIT Buzzer Setup Use 1 or to select each buzzer option and use or to change the value BUZZER SETUP KEY BEEP ON POWER ON ON VIDEO LOSS OFF ALARM EVENT OFF MOTION ON TIME DURATION 01 SEC SELECT FIELD CHANGE VALUE MENU SAVE AND EXIT 1 When KEY BEEP is on DVR beeps every time when users press any buttons on the key pad 2 When POWER ON ts on DVR beeps when it is turned on 3 When VIDEO LOSS is on DVR beeps when it
32. SOU ito 39 ARMS CUD pascal ao babor loreto clio lala 40 DEQUEMCE Us 41 RSS 810 SC Di e iaa 42 o cueie eceacina aiannite EE 43 ACS O epee oer eee en oe Teen ES EPROM SOREN ROR Sete RE ST MRE ene eT 44 Dale TMG SUD ia 44 UWL AD K I AAA EEEE ebeere nec E 45 HATO ISIC ATOM AO nao 45 HOD FORNA APP DA nstameannadeteuenadeaadsoed 46 HDD Record Mode scce E R a cartel casiecoecaelacecl cecal e inet ces 46 Facio SC AA E A 47 Pan FU OTs o loe oaa eea 48 A a ase en RN RCO 49 nstaltPG Player Proa a ick oie occult eee 49 Connect DVR to COMPUTES ooccccccccncccccncccncnonocnnonnnnnnnncnnonnnnnonnnnnonnrnnnnnnnnnnnnnnnnnnenonnnoss 49 PUI Gr layer PrO Neen sneer oneness 50 Interface and Operation IndicatiON cooccccocnnccccnncononnnononononacononacnnonannnnnncnonnncncnnns 50 OPE an ee 50 BALE N A 0 o PAE PO II ne ye ae nen T 52 AIR VON up sia 53 SU A o eee ee 53 en 53 Turn On Off Time and Channel IndicCatiONS occccoocccconcnconncnconannnonanncnnanonnnanos 54 FENN Clee A aadeece casas act are sat acc naira acai ane ase aare 54 Internet Operation Using IE Browser Only For DVR EZPRON Model ooooooo 55 PAV NIG CO icra secre pacts aececn cs ce ce e ds tia 56 Capture and Record sisi diia 56 PAV AC AA AP e o En ahectaceseaceen ee 56 O A oe nD TOE 57 NOT WOM oe last a A E 58 INCUW ON ucimiciaiaiia cialis ici dic idin tate iaieiaietn iia iiciduid 59 OVAS Ud 61 A A DO E AT AA Rao A aR ME 61
33. T LIST SELECT ANOTHER PAGE 1 4 SELECT FIELD ENTER VIEW EVENT MENU EXIT Press or to go to other pages Press or to select events and use to view the event A PAGE NUMBER It represents the current page number The DVR has a total of 143 pages B EVENT LIST It shows events Use 1 or button on the front panel to select the event Each event row shows the event time event channel and event type For example 002 07 08 11 11 17 02 represents Event 2 on 11 17 02 on August 11 2007 L1 means Video Loss happening on Channel 1 M2 means Motion Detection triggered on Channel 2 A3 means Alarm Event triggered on Channel 3 When the event is confirmed press t to view the playback Press MW to end the playback and return to LIVE VIEW Press LA Menu Button to start a new search Press Il to pause the playback NOTE This DVR is capable of storing more than 1000 events Event records are deleted if users format the HDD 22 Playback Operation When starting playback DVR now is in playback mode and displaying This DVR provides different speeds of playback fast backward fast forward and frame by frame play back CAM1 CAM2 CAM3 CAM4 Playback Indication 07 07 07 14 12 12 PB 8X PB END When in playback mode the left lower screen shows the operation type gt PB means playing forward while lt PB means rewind
34. Type Event Schedule Set Event Event Paga i Event Information MOCH 0808 14 17 58 18 M_ CH3 08 03 14 17 37 30 M CH3 08 03 14 173738 M CH3 08 03 14 17 37 26 M_CH3_08 03 14_17 37 20 Schedule Recording schedule can be arranged in this page Click any cell and type C M A or N to assign value C is for Continuous M for Motion Detection A for Alarm and N for None 75 Time Camera Buzzer HDD Alarm In Alarm Cut Sequence Password Information Record MessageType Event Schedule Set Schedule Day E F F 3 amp F 25 10 E 17 18 4 15 16 TF T 19 30 2 33123 at Sun EE Rn a a ge el EE Mon eo 9 Ig 2 M0 3 2 O 8 100 a a A IO O OL O 3 O 3 00 3 0 a 00 100 O Tue EE EE EE E E E E E E E EA E DE E E E E E E E E Wed E ELE E E E E E E E E E El E El E E E E E E EEE Thr EE UE E E E E E UE UE E UE UE UE UE UE E UE E E E E EE Fri ELEVE j Laga Lage LEs p Lag PELE LME ELE a a DLE a La y NUEVE a a Laga E Sat ELELELE ELE ELE ELLE PP ELE ELE ELE C gt Continous M Motion A Alam N None Recording z 5 Event Log Event log keeps all records happenina Event Log 2007 10 29 13 39 51 192 168 1 192 Message 2007 10 29 13 39 50 192 168 1 192 Messace 2007 10 29 13 33 21 192 168 1 192 Message CHOO_Record_Off 07 10 29 13 34 17 CHOO_Record_On_07 10 29_13 34 07 CHO4_Motion_Detection_07 10 29_ 13 34 07 2007 10 29 13 16
35. ail nd E_ Mail Address eugene Zemail com SMTP mail zmail com Set Valve DVR Setup In this section users can see several pages and are able to change the options for DVRs Time DVR date time can be changed here Time Camera Buzzer HDD Alarm In Alarm Out Sequence Password Information Record MessageType Event Schedule Set Time Active New Setting oa coca 71 Camera Users can modify each channel s title brightness contrast saturation and hue By clicking Default all settings in this page return to factory default values Time Camera Buzzer HDD Alarm In Alarm Out Sequence Password Information Record MessageType Event Schedule Set Camera Channel ID Joi z ca TA Statuation gt __ 38 Activa Naw Setting Buzzer Users can enable disable buzzer for key beep motion detection power on alarm trigger and video loss The beeping length can be changed as well Time Camera Buzzer HOD Alarm In Alarm Out Sequence Password Information Record MessageType Event Schedule Set Buzzer M Key Beep Buzzer T Motion Buzzer V Power ON Buzzer Alarm Buzzer Video Loss Buzzer Beep Time H E Activa Naw Setting HDD HDD shows the information on the hard drives in DVR The recording mode can be changed to either Recycle or Once Time Camera Buzzer HDD Alarm In Alarm Out Sequence
36. ain Ft 2 Fh 2 4 42 oo In this page it shows the description of Dynamic DNS After reading the information click Get Started to set up a Host Name for your IP address 80 DynDNS DynDNS com Dynect gt TLDDNS gt Corporate D D N S Logged In User EugeneHuang y n My Services My Cart Log Out Cae Dynamic DNS DNS Services i j Dynamic DNS DDNS allows you to create a hostname that points to your dynamic IP or static IP address Custom DNS Get or URL We also provide an update mechanism which makes the hostname work with your dynamic IP li e Started Dynamic DNS A address We continue to offer this service free to the Internet community as we have done so for How To nearly 10 years Manage Hosts Account Upgrades J Standard Domains Ss ESOS Capabilities and Features Screenshot Recursive DNS pe wa az Secondary DNS e Get five 5 hostnames in 88 available domains for free tn i Po a e Create wildcard CNAME yourhost dyndns org for yourhost dyndns org Domain Registration ee x 9 a e Forward web requests or mark host offline for maintenance or downtime a a Cartficates e Configure MX records for flexible mail routing MailHop Services e Update host using ddns update clients for a wide variety of platforms 7 e Modify DNS TTL values for fast propagation or reliable static IP caching Network Monitorin NOAA J e Deliver your
37. ash drive and press QC button to resume backing up Otherwise press Ml to stop 35 USB MASTER WARNING FORMAT USB FLASH DEVICE USB FLASH DEVICE WILL BE FORMATTED PRESS ENTER TO RUN 4 When the backup is completed press MW to exit backup progress Press La key to exist and return to live view 5 Unplug the USB memory storage device and connect to any PCs except Apple system to view the video NOTE When selecting the backup time make sure the beginning time of video is valid If the beginning time of video is not valid DVR will start from the nearest time point TCP IP SETUP Only for DVR EZPRON Model system Requirement Microsoft Windows 2000 or above Operating System Pentium 4 or above CPU 512 MB or above DRAM TCP IP SETUP TYPE STATIC 00080 192 168 001 002 192 168 001 254 255 255 255 000 192 168 001 001 00 28 46 00 41 71 CONNECTED 1 lt SELECT FIELD CHANGE VALUE ENTER RUN MENU EXIT 36 Network function lets users to view live video and recorded video via the Internet It also supports DDNS function for users if they only have dynamic IP ADSL service from ISP Users may do network configuration in this section The default IP address of the DVR is 192 168 1 1 port number is 80 Subnet mask Is 255 255 255 0 and Gateway is 192 168 1 254 1 Use t or to choose network type and its necessary items 2 Press or
38. ccount Password Set ho at fr ont user user networkadmin networkadmin i f E A A PO L EE h j p EEEE Users can setup maximum five administrator accounts and five user accounts Administrators can see the live view record video to local computers and change DVR settings Users can only see the live view from the multi management page System Device Name Video Server SET 2 Load Network Default Setting 3 Current Firmware Version SHL_GK_022 New Firmware Upgrade 2 Upload Mew Firmware UPLOAD 3 Re boot Network Server REBOOT In System page users can do the following operations 1 Change DVR s name 2 Return Network Setting to Factory Default 3 Upgrade Network Module Firmware a Select firmware from the local computer b Click UPLOAD to upload firmware and upgrade Then click YES on popup window c Click REBOOT to reboot DVR to complete upgrading procedure E Mail Users can enable the email notification function by fill the table shown below 58 1 SMTP Enable ON OFF 2 E mail address 3 SMTP 4 PORT 25 default port is 25 5 SMTP Authenticate O ON OFF 1 E mail ID 2 E mail Password 6 TLS O ON O OFF E mail message type 1_Network Infromation 1 IP change 2 Type change 2 HDD Fail 3 Video Loss 4 Video Recover 5 Motion Detection DVR will send notification emails when the following situations happen DVR s IP or network ty
39. count Password Confirm Apply About About shows the version and released date of CMS Cancel When the cameras support PTZ control users can manage them in this panel 4 Y are used to pan Ll Ll are used to tilt and buy are used to zoom in and zoom out Playback Users can review the playback with CMS Right click on any channel of the live view and it shows the menu Choose Playback to proceed select Channel Recrod VI d ea slut Playback LDisconmect Delete Player Start Time End Time e A ETE OOO ao Sal daje el al 1 Search Time Scroll to a specific time point 2 Run under Search Time bar Start to play playback of the specific time point 3 Run Start Time Play playback from the very beginning of the recording 4 Run End Time Play playback from the end of the recording 5 lt lt Change rewinding speed from 2x 4x and 8x 6 lt Rewind at normal speed 7 Stop Stop playback and show the live view 8 Pause 9 gt Play playback at normal speed 10 gt gt Change playing speed from 2x 4 and 8x 11 1 2 3 16 Select certain channel for playback 12 ALL See all channels 13 Cancel Stop playback and return to the live view Quit the popup window 77 DVR Finder Only For DVR EZPRON Model DVR Finder is a program that searches all the DVRs in the LAN Please insert the CD provided with the pack and click DVR Network Find
40. cuit under normal circumstances When the circuit is completed DVR starts to record NC Normal Close means the external alarm sensor device circuit is completed under normal circumstances When the circuit is short DVR starts to record OUT DVR supports one alarm out ON means DVR activates the external alarm sensor device such as buzzer alarm when the input alarm of that channel is triggered For example if you set Channel 2 ALARM OUT to ON and the input alarm channel 2 is triggered DVR FULL DVR displays certain channel of video in full screen if external alarm sensor is triggered of that channel For example when Alarm In 1 is set to ON Channel 1 will switch to full screen Each Channel Mode after the input alarm channel 1 is triggered Alarm Output Setup This section allows users to decide the length of alarm output time ALARM OUTPUT SETUP ALARM OUT TIME 1 30 SET UP THE LENGTH OF ALARM OUTPUT TIME CHANGE VALUE MENU SAVE AND EXIT 1 Cycle available values 1 60 seconds with or key 2 Press H Menu Button to save all changes and go to the previous page Sequence Setup Users are able to adjust the interval of displaying each channel in Sequence Display Mode 41 SEQUENCE SETUP FULL SCREEN 01 SEC SET TIME LENGTH TO CYCLE THROUGH EACH CHANNEL CHANGE VALUE MENU SAVE AND EXIT 1 Cycle available values 1 60 seconds with or key
41. detection to set up each camera recording option to adjust video format and to set up each camera visibility in live view mode ITLE SETUP Press 3 or button to choose each section Use 2 button to access the section 24 Title Setup TITLE SETUP CAM1 CAM1 CAM2 CAM2 CAM3 CAM3 CAM4 CAM4 lt gt SELECT FIELD CHANGE VALUE MENU SAVE AND EXIT Use 7 or lt button to select each character of cameras Press or button to cycle through available characters 0 9 A Z Each channel of camera can have four characters at maximum Press HA Menu Button to save changes and return to the previous page NR Color Setup COLOR SETUP CAM 01 BRIGHTNESS 32 CONTRAST 42 SATURATION 38 HUE 32 GAIN 1 63 32 ADJUST QUALITY OF EACH CAMERA SELECT FIELD CHANGE VALUE MENU SAVE AND EXIT 1 Highlight CAM first to choose camera channel Press or to select each channel 2 Use T or button to each adjustable item and use or button to cycle through available values Note 01 gt Minimum 63 gt Maximum 3 Press lL Menu Button to save all changes and go to the previous page 23 Motion Detection Under this section users are allowed to adjust motion detection areas sensitivity and relay in DVR The relay serves as a terminal of external alarm to
42. e at total 2A current to the cameras If the camera consumes too much power please use an individual power for it 3 The image is incorrect twisted or flickering Make sure the NTSC PAL setting is set in accordance with the local power system Go to MAIN MENU gt CAMERA VIDEO SETUP gt NTSC PAL SETUP to adjust 4 There is no image on the IE browser when connected to the DVR Please install the ActiveX plug in AVMonitor for IE It can be found in the CD provided with the pack 5 When connected to the DVR the IE browser CMS shows disconnect directly The DVR supports maximum four connections at the same time When the connection is full the IE browser or CMS will show disconnect directly 6 forget the password of the DVR The universal password is 5785 Quad SEQ Pause Quad Use the universal password to enter and change the password right away 7 forget the ID password for the IE CMS connection The universal ID password the IE CMS login is 1111 1111 8 The remote control does not work The operating distance from the DVR to the remote control is around five meters Please use it within five meters away from the DVR If it does not work within the distance the remote control is out of battery Please change a new battery 9 lam using a router to share network but the DDNS function does not apply The DDNS function is used with DVR connecting to PPPoE or public dynamic IP directly If the DVR is working
43. er to install Click DVRFinder icon on the desktop to run the program After pressing Search DVR button it shows all the DVRs found in the LAN DYR Finder ES F idies T ce us 7 Pon Pon Hah e z e esa ED Video Server 102 168 0 75 255255255 0 102168 0 1 139175252 16 D0 14 62 00 03 17 Video Server 192 168 0 76 255255255 0 192 168 0 1 129 175 0 0 a0 00 14 62 00 02 21 Connect DVR M Video server 192 168 0 77 9 255 255 255 0 192 168 0 1 0 0 0 0 a OFF O0 14 62 00 00 01 PAR DVR Clear About lear Exit Users can select any DVR in the table and press Connect DVR button to connect to the DVR by the IE browser Users are able to change the network settings by pressing Edit DVR button ID Device Name IF Addres Mask Address Gateway Address 192 168 DNS 139 175 Port Number DHCE C ON te OFF Mac Address 10 1459 0031 Clear button is to clear the table of all DVRs found in the LAN About button shows the version of DVR Finder Exit button is clicked to close the program 78 DDNS Only For DVR EZPRON Model DDNS Dynamic DNS provides dynamic domain names for dynamic IP users It translates domain names to dynamic IP address Dynamic IP users can use DDNS to get access to their computers without memorizing the IP This DVR supports DynDNS hitp www dyndns com DDNS service gt Dynect gt TLDDNS gt Corporate Logged In User EugeneHuang My Services
44. h terminal 4 Press li Menu Button to save all changes and go to the previous page Status Select In this section users can choose the channels of video to be visible or invisible tn live view mode STATUS SELECT CH VISIBLE CAM1 ON CAM2 ON CAM3 ON CAM4 ON ON OFF DISPLAY OF LIVE VIDEO SELECT FIELD CHANGE VALUE MENU SAVE AND EXIT Press t or key to highlight each channel of video Use or button to choose ON or OFF ON means the channel is visible in Live View display OFF means the channel is invisible in Live View display 3 Press li Menu Button to save all changes and go to the previous page NOTE DVR still records the video even if the channel is invisible NTSC PAL Setup The default setting of video format is corresponding to the importing country In case of using the DVR in different video format zones users may need to adjust video format in this section 2d NTSC PAL SETUP VIDEO SYSTEM NTSC PLEASE REBOOT DVR TO APPLY CHANGE CHANGE VALUE MENU SAVE AND EXIT 1 Press or key to choose NTSC system or PAL system 2 Press LA gt Menu Button to save all changes and go to the previous page 3 Reboot DVR to activate the new setting Record Setup Under this section users are allowed to setup record mode and schedule record video quality and record rate Use 1
45. ior notice Installation and Exchange of HDD 1 Open the lid on the top cover 2 3 Connect power cable and transmission bus to the hard drive 4 HDD rack will rise Put the hard drive on the rack and screw it to HDD rack Note Please leave some space between the fan and the HDD for air circulation Upload PC Player Program After first installation of HDD or changing a new HDD we need to upload PC Player Program to DVR DVR will automatically copy the PC Player to USB flash devices when backing up through USB This leads to review video anytime anywhere 1 Turn on the DVR by switching on the power on the back panel 2 Plug USB flash drive device to plug on the DVR front panel es Y Go to Factory SETUP menu In Factory Setup highlight USB FORMAT press or to change NO to YES And press to format USB FACTORY SETUP 1 LOAD FACTORY DEFAULT 2 USB FORMAT 3 LOAD PC PLAYER 4 FIRMWARE UPGRADE ML204GK 040 JAYS 7015 SKL 1075 ENTER CONFIRM AND RUN AP SELECT FIELD CHANGE VALUE MENU EXIT 5 Remove the USB flash drive from DVR and plug it to PC Note Apple System is not applicable 6 PC automatically detects the USB device Please open the file window inside USB flash drive and there are several files Please delete PLAYER PAK in the USB flash drive DAYLIGHT DAT EYENT DAT DATES 533 DAT 32 KB S25 39 KE RECORD DAT 232 DAT dese
46. nagement interface shows up as below picture 55 7 Frame Set Windows Internet Explorer gt E hep a9 168 1 192wb him GH Mk PAN APM e St Fme set Live Video Network Setup DVR Setup Auto Log Setup Display LJ S Recommend monitor resolution L above 1280 1024 M above 1024 768 Capture Capture e Set Record Stan c Set Live Video In Live Video page users can see the live view snap image record video and view playback Capture and Record tor Le Channel 1 All Displav 1 s Recommend monitor resolution L above 128071024 M above 1024 768 Capture al Set Record E As soon as entering Live Video page it displays the live view on DVR Channel Users can change to see different channel or Quad mode by click the buttons Display Users can change the solution of the live view L is the largest where S is the smallest Capture Users can snap images from the live view to the computer Type the destination path and click Set to apply And click Capture to save images to the path Record Like Capture Record saves the live view as video files to the computer Type the destination path and click Set to apply And click Record to save videos to the path Playback In Playback users are able to review videos saved in HDD of DVR 56 re Ant Channel JB 5 a all Display E m ES Recommend monitor resolution L above 1280 1023 M above 10 1 768 Search
47. nuous Record CONTINUOUS RECORD RECORD QUALITY SUPER RECORD FPS JPEG 30 CAM1 RECORD ON CAM2 RECORD ON CAM3 RECORD ON CAM4 RECORD ON SELECT FIELD CHANGE VALUE MENU SAVE AND EXIT 29 1 Press or button to cycle through available values They are SUPER HIGH NORMAL STANDAR where SUPER is the highest video quality and STANDARD is the lowest video quality 2 Use T or key to highlight RECORD FPS and press or button to cycle through available values Users can choose compression format from MJPEG and MPEG4 The available values of FPS for MJPEG are 1 2 4 8 15 and 30 30 is for the most fluent recording and consumes HDD space the most The available values of FPS for MPEG4 are 2 4 8 15 30 and 60 3 Users can enable or disable continuous recording for each channel Use or to select ON or OFF ON means enable the channel recording and OFF means disable the channel recording 4 Press Menu Button to save all changes and go to the previous page Recording Duration Hale Compression Size per frame KB BE Size per hour MB Hours for an 160GB HDD i 30 MPEG4 Compression Dual Codec Mode Only Size per frame KB Size per hour MB Hours for an 160GB HDD Ca e Cap e IED a ION IET IA Co on 2 31 Motion Record MOTION RECORD RECORD QUALITY SUPER RECORD FPS
48. ons to select each DVR or Quad mode shows current DVR s IP and name Click Ase eve view to eve it to add or delete DVR from CMS Or right click on the live An Add DVR window will pop up Fill the correspondent blanks and click OK to add a DVR Default Name and Password is root root Add DYR 2 67 Channel buttons are used to change different channels or split display Recording and Capturing Panel K CMS records video immediately when this button is pushed CMS uses time table to record video Fx Press this button to see the time table and arrange recording schedule a Press this button to snap an image A Set the destination path for recording and capturing images The folder will be STORAGE Configuration Panel Note If the DVR is in MENU pages the changes of settings on CMS will NOT be applicable to the DVR In this panel users can change settings for DVR including Network Setup DVR Setup and CMS Setup Network Setup 68 Hetwork Setup Network ppns Server Set Network Net Type Static IP v IP Ad ress 192 1 Mask Address 255 255 255 Getway Address 192 DNS 1 Addorss 0 DNS 2 Addorss E Z BR i Port Number 80 Active New Setting Cancel Users can change the connection types IP address mask address and so on for DVRs Nat Type Static IF T lf DHCP is applicable in the network environment users can check DH
49. other electrical devices which is to activate the alarm or the devices when motion is detected For example users may connect a buzzer alarm to DVR I O Out When motion is detected by DVR and relay is on the buzzer alarm is triggered DVR External Alarm or M D d MOTION DETECTION AREA SETTING CAM 01 RUN SENSITIVITY 07 1 MOST RELAY OUT OFF ADJUST MOTION DETECTION SELECT FIELD CHANGE VALUE MENU SAVE AND EXIT 1 Highlight CAMERA AREA SETTING section and use or to choose each camera channel Once channel is confirmed highlight RUN and press to start area setting A16 x 12 cell blocks pops out Use t lt and gt key to select each cell and use or button to enable or disable motion detecting block A highlighted cell block 26 means the motion detection Users may press button to select or deselect all cell blocks 2 To adjust sensitivity use t or key to highlight SENSITIVITY section and press or key to cycle available sensitivity values from 1 to 7 Note Value 1 is the most sensitive 3 To activate relay function use 1 or button to highlight RELAY OUT and press or button to turn it on or off NOTE When RELAY OUT is on the relay in DVR will activate the external buzzer alarm device which is connected to ALARM OUT on the alarm switc
50. pe is changed HDD fails Video loss occurs Video recovery occurs Motion detection occurs APA Network In network section users can change network settings and DDNS setup This section Type DVR supports Static IP DHCP Dynamic IP and PPPoE protocols TYPE STATIC IP v PE STATIC IP TYPE DHCP CLIENT TYPE PPPOE If your network environment uses Static IP please select STATIC IP 59 TYPE STATIC IP IP Address 1192 Lhes Ia 192 Subnet Mask 265 2655 255 o Gateway 192 168 E A DNS 4 1P 439 175 252 te DNS 2 IP lo e lb i Port 80 Sai In DHCP network environment please select DHCP CLIENT Choose ON and click Set to enable setting TYPE DHCP CLIENT v DHCPC State OFF ON OFF Set IP Address 192 168 1 192 Subnet Mask 255 255 255 0 Gateway 1192 16811 DNS IP 139 175 252 16 If PPPoE is used please select PPPoE Choose ON and fill in user ID and password subscripted from your ISP Then click Set to enable setting TYPE PPPoE v PPPoE State OFF O ON O OFF PPPoE User ID Ad tub PPPoE User Password ss Set IP Address 192 168 1 192 subnet Mask 255 255 255 0 Gateway 192 168 1 1 DNS 1 IP 139 175 252 16 DNS 2 IP DDNS lf a dynamic IP or PPPoE service is used and users want to use DDNS to get access to DVR please choose ON and fill Name ID and Password Click Set to enable DDNS for DVR 60
51. puter 2 Plug one end of the USB cable to the PC port on DVR and the other end to the USB port on PC 49 PC LINK PC LINK RUN INSTALL PC PLAYER BEFORE LINK ENTER CONNECT MENU EXIT 3 On DVR select Backup Video gt USB Slave Press key to establish connection 4 When connection is established a new hardware icon E Is shown in the notification area on the screen lower right corner Run PC Player Program 1 After installation there is a GKBPlayer icon on the desktop Double click it to run 2 The main screen of PC Player is shown Interface and Operation Indication Open Video ve 1 Click w to open Open File List dialog box el Browse 2 Press and select the DVR disk Select any dvr file and click Open All the records are shown on the list 50 search all time Start End search file event search all HDD event Copy file to PL Copy eventio PC File Name Start Time End Time FADYR_0005 DWR 2007 10 30 14 45 59 200792108 16 25 15 PAL FADYR 0005 D YR 2007 12 19 10 41 51 2007 12 19 11 19 10 NTSC FADYR 0006 DYR 007128 16 25 15 2007712719 10 41 09 NTSC FADYR_0007 D R 2007 12 19 10 41 09 2007712719 10 41 51 NTSC 3 Select one of the record and press Open to view the video 4 Users can directly copy the records to PC without opening them Press C file to PC pai and a Copy file to PC dialog box is shown Select the destination path b
52. r program on the CD ROM 3 Please use the USB port on the rear side of the PC as your platform Flash Disk Backup Note 1 USB 2 0 is recommended 2 USB memory storage device will be formatted in USB Master Backup Please back up all the files before using USB Master Backup PC LINK PC LINK 1 Connect DVR to PC via USB cable provided in the package 2 Highlight RUN and press to make the connection between PC and DVR If DVR is successfully connected to PC you will see a USB mass storage connection icon on 34 the right and low side of PC screen DVR screen also shows USB connection is ok There is a USB device icon show on your screen when PC detects DVR 3 4 5 Press W to cancel the connection to the PC 6 Press H Menu Button to save all changes and go to the previous page FLASH DISK FLASH DISK HDD YY MM DD BEGIN 07 08 12 END 07 08 16 USB BACKUP BEGIN 07 08 12 END 07 08 16 Use 1 4 gt or gt key to highlight USB backup begin end date and time Press or key to cycle through available values After confirming the USB backup recording period press to enter USB MASTER WARNING page USB MASTER WARNING page appears on the screen Press to format USB Flash and begin backup Press Ed Menu Button to cancel and exit the warning page Note When the flash drive is full users can change a new fl
53. s e Get five 5 hostnames in 88 available domains for free e Create wildcard CNAME yourhost dyndns org for yourhost dyndns oro e Forward web requests or mark host offline for maintenance or downtime e Configure MX records for flexible mail routing e Update host using ddns update clients for a wide variety of platforms e Modify DNS TTL values for fast propagation or reliable static IP caching e Deliver your DNS records to 5 DNS servers in 5 tier 1 datacenters around the globe Screenshot Our free industry leading e mail support is ready to help you setup your dynamic or static DNS so you can host a website remotely connect to your machine and run a mail server We also offer other premium features with our Account Uparade service Documentation E 79 Complete the form and click Create Account button at the bottom to finish the process DynDns will send an email to you Click the link in the email and account creation process is complete DynDNS DynDNS com gt Dynect gt TLDDNS gt Corporate Lost Password Create Account Q DynDNS usr ol My Account Create Your DynDNS Account Create Account Please complete the form to create your free DynDNS Account z Login User Information Lost Password Search EE oa Ye password needs o be more than characters and cannot ba the same as your wenam A Do not choose password that is a common word or can
54. s Get Current Settings to retrieve current values from DVR Alarm Output Alarm Output 1D Enable OFF 4 Time EN wi Get Current Settings When alarm output is used the settings can be modified here Click Set to apply changes and press Get Current Settings to retrieve current values from DVR Password New Password Confirm New Password i Set Users can change DVR s password in this section Please note ONLY numerals can be used for password And four digits must be keyed in at one time Version DVR Firmware Version ML 017 JAYS 013 SKL 051 Version shows the current firmware version of DVR 62 Factory Load Factory Default button is clicked to return DVR to original factory default settings Record Record settings such as Mode Continuous Alarm and Motion can be changed here q _ E 3O300O000 A ZOO OOOO OOO O Get Current Settings This is the recording schedule Users can set every hour in each of seven days C is for Continuous M is for Motion Detection A is for Alarm and N is for None Recording Click Set to apply changes and press Get Current Settings to retrieve current DVR settings Continuous Continuous Mode f Recording Quality Super Y Recording Framerate 30 Se J Get Current Settings Get Current Get Current Settings Users can adjust recording video quality and frame rate in this page Click Set to apply changes and press Get Current Se
55. si 39 KB ROMCODE 180 WinRAR Et 1 024 EB Insert the provided CD to PC and open the file window In this disc there Is a file called PLAYER PAK Please copy the file PLAYER PAK and paste it to the flash drive Properly remove the flash drive from the PC and plug it to port on the DVR front panel In Factory Setup highlight Load PC Player and press or FACTORY SETUP to change No to Yes 1 LOAD FACTORY DEFAULT 2 USB FORMAT 3 LOAD PC PLAYER 4 FIRMWARE UPGRADE ML204GK 011 JAYS 007 SKL 040 ENTER CONFIRM AND RUN Fa SELECT FIELD CHANGE VALUE MENU EXIT 10 Press 4 to upload PC Player Program to DVR DVR Front Panel Record Video Playback Video Fast Forward Video Pause Playback Video Menu Channel 1 Channel 3 Quad View Sequence Display USB Link to PC Enter Up Left Adjust Value Quick Backup Video Reverse Playback Video Rewind Playback Video Stop Playback Video Key Lock Press this button the system configuration key pads will be locked Users must enter password to activate system configuration key pads Channel 2 Channel 4 Picture in Picture Display USB for Flash Drive Infrared Receiver Down Right Adjust Value Keypad Mapping A i GS SEQ Sequence J Reverse Playback 4 2 4 5 7 DVR Rear Panel Lsensorn ALARM 485 Power Switch Internet Plug
56. st to finish the process 81 D D N S Logged In User EugeneHuang y n My Services My Cart Log Out hs a te Corvicec erruint Sunnort dowr My Account Host Services Add New Hostname Host Update Logs My Services Hostname digiview dvrdns org created Account Upgrades SLA Hostname Service Details Last Updated Premier Support digiview dvrdns org Host 220 130 57 66 Oct 29 2007 5 07 AM Zone Services Host Services MailHop Outbound Recursive DNS Network Monitoring SSL Certificates Renew Services Auto Renew Settings Sync Expirations Account Settings Billing My Cart Qitems Now you are able to access your IP by using Hostname domain In this example digiview dvrdns org is mapped to 220 130 57 66 Choose DDNS and fill the following form After setting you can use the domain name to get to DVR DDNS State ON OFF Domain Name digivew_dvrdns org User ID Eugen eHuang Password c Set Appendix Troubleshooting 1 The DVR cannot detect the hard disk drive the screen shows HDD NOT FOUND Make sure the IDE cable and power cable are connected properly to the hard drive Turn on the DVR without connecting CCTV Cameras first It may caused by consuming too much power and leads to malfunction of the HDD 2 There is no image from the cameras Make sure the cameras are working all right by connecting them to a CRT monitor directly The DVR can only provid
57. ttings to retrieve current DVR settings 63 Alarm Alarm Mode Recording Quality Super Y Recording Frame Rate 30 Y Recording Time 30 ini Pre Record ON v Set Get Current Settings In this page users can adjust the options for Alarm Mode including Recording Quality Recording Frame Rate Recording Time and Pre Record Click Set to apply changes and press Get Current Settings to retrieve current DVR settings Motion Motion Mode Recording Quality Super Recording Frame Rate 30 Recording Time 10 Y Pre Record ON Y set Get Current Settings In this page users can adjust the options for Motion Detection including Recording Quality Recording Frame Rate Recording Time and Pre Record Click Set to apply changes and press Get Current Settings to retrieve current DVR settings Auto Log Setup In this section users can set Auto Log Setup for DVR to keep records of Motion Detection Alarm Input Power On and Record On etc 64 Auto Log Enable Motion Detection ON OFF Alarm Input ON OFF Power On ON OFF Record Om ON OFF Record OF ON OFF Video Loss ON OFF HDD Fail QON COPE HDD Full ON OFF Get Current Settings Users can enable disable each option Click Get Current Settings to retrieve current DVR settings and Press Set to apply changes Auto Log List 1 ms is ns es ep E E E spew us OO pewne pese O em pese A EA o
58. uality you like by drawing the slider Select output mode an AVI file or JPEG files by 6 pictures per second Click _Browse choose the destination directory 7 Type the file name for output Create File 8 Press e to proceed Turn On Off Time and Channel Indications ES Press to turn on or off the Time and Channel Indications on the screen Print Screen Users can print the screen through a printer by pressing 54 Internet Operation IE Browser Only For DVR EZPRON Model users can manage monitor through the IE browser Because the application developed for IE is using ActiveX please install the ActiveX file in the CD Click Active X Plug in Package to install To manage monitor through the IE browser please follow the steps 1 Open IE authorizin gJ Note If the DVR is in MENU pages the changes of settings on IE browser will NOT be applicable to the DVR iliri a eiir cee 4 A multi management page is shown Click Link button on the first cell fo Video Ferer Wislowr nieroet Explorer E E Rep W192 1601 LS doc ella pe EXP NE SPARE Tam RA Brote m E m A FIAD ic Channel AJ Bel Lirik i le vam lt 1 Del Link hannal All Del Link Channel An Del Link pE u Port Add hirad mirror 100 5 DVR s web ma
59. under a router the DDNS settings should be applied in the router 10 What is the default password for the DVR The default password for the DVR is 0000 press m four times The default ID password for network administrator is root root for users is user user 83 Technical Support 0121 7861881 ELECTRONICS LINE UK LTD ESP ADDRESS UNIT 7 LEVISS TRADING ESTATE STATION ROAD STECHFORD BIRMINCHAM B33 9AE UK TEL 0121 7898111 FAX 0121 6030333 www espuk com eso electronics line uk LACE FE ISO 9001 2000 CR300000270
60. y pressing nee Type the file name and draw the time bar to Copy file to PC set Start Time and End Time Finally press to finish copying Copy file to PC 1 Select path iCAProgram Files DVARPlayerBackup Browse 2 File Name 20071218 162515 DVR 2007 1259 10 19 22 al 3 Stan Time 4 End Time 5 Start copy Copy file to PC Close 5 Users can also copy event videos to PC without opening them Search file event Search all HDD ewent Press and the events will be Copy event to PC shown on the list Click any one of the events and press 51 Copy event to FC 1 Select path C Program Files D RPlayer Backup Browse 2 File name 20070904_1 01930 DYR 3 pre record time io Second 7 A postrecord time 1 Minute 7 5 Copy event to PC Close Select the destination path file name pre record post record time and press Copy event to PC to copy the event file to PC Play Video After opening the video the video information is shown on the lower left corner It shows the format Start Time and End Time of the video Information 6 45 e System e Start Time End Time 2007 1129 2007 1219 E NTSC J 10 41 51 11 19 10 On the lowert right corner there shows playing statuses including playing speed date and time Operation Buttons Reverse playback Te Hao Play frame by rame 3 Playback at 1 2x Go to the beginning gt gt Coto ena

Download Pdf Manuals

Related Search

Related Contents

User's guide  TWE-EH-S 取扱説明書  Samsung ML-2150 Manuel de l'utilisateur  CVW-42AK2 Video Wall User manual    User manual type 34003095  

Copyright © All rights reserved. Failed to retrieve file