TRENDnet User`s Guide Cover Page
Contents
1. The camera supports the Jabber IM service so that you can send an instant message once you have a Jabber account For more information of Jabber please visit the Jabber Website at http jabber org M ain Page The information show above is using google talk e Instant Message Jabber ID Enter your user ID to login into the Jabber IM service Jabber Password Enter the password to login into the Jabber IM service Manually Specify Server Host Port Select the Enable option to manually configure the Jabber server settings Jabber Server Address Enter the Jabber server address manually Jabber Port Assign the Jabber port manually in the text box Encrypt Connection Select the Enable option to secure the connection Encrypt Authentication Select the Enable option to secure the connection Receiver Enter the receiver s information Message Enter the message that is to be sent Copyright 2012 TRENDnet All Rights Reserved Motion Detect The Motion Detect menu contains the command and option that allow you to enable and set up the motion detection feature of the camera The camera provides three detecting areas TRENDNET Outdoor PoE Megapixel Day Night Internet Camera TV IP322P Location 2012 10 01 12 15 33 Motion Detection Detection Configuration Pe Setup Smart Wizard Basic Network Video Audio Event Server Motion Detect Event Config Tools RS 485 SD Card Dev2. Subnet Mask Enter the Subnet Mask of the camera The default setting is 255 255 255 0 NOTE If the camera is behind an NAT router of firewall the suggested to be used is from 1024 to 65535 Default Enter the Default Gateway of the camera The Primary DNS Domain Name System translates Network Advanced Secondary domain names into IP addresses Enter the DNS Primary DNS and Secondary DNS that are dike provided by ISP default 443 PPPoE Select this option when you use a direct connection via the ADSL modem You should have a PPPoE account from your Internet service provider Enter the User Name and Password The camera will get an IP address from the ISP as starting up u B gt gt mi NOTE Once the camera get an IP address from the ISP as starting up it Authentication Disable automatically sends a notification email to you Therefore when you select RTSP Port PPPoE as your connecting type you have to set up the email or DDNS configuration in advance 554 default 554 1255 1 10 0 H 264 Port 1234 default 1234 MPEG4 Port 1236 default 1236 e DDNS Setting With the Dynamic DNS feature you can assign a fixed host and domain name to a dynamic Internet IP address To set up the DDNS Audio Port 1238 default 1238 255 a 1 255 1 Select the Enable option to enable this feature RTSP Streaming Multicast settings Qos Live Video DSCP Live Audio D
3. Delete Delete this from all weekdays e Motion Detect Trigger Select the Enable option to enable the trigger function of the camera so that you can send captured images within the detecting area Profile Name Display the profile name that you select in the Schedule to the FTP server email receiver or the Network Storage server You have to ensen configure corresponding settings such as FTP server and email server to enable this feature Please note that you have to configure the related settings Weekdays Select the weekday s that you want to separately assign in the before enabling these features schedule profile The weekday that has been assigned will be displayed with green color Time List Display the time period that you have assigned within the selected weekday To assign the same time period to every weekday click Copy this to all weekdays click Delete this from all weekdays to remove the selected time period from every weekday Click Delete to remove the selected time period Start End Time Enter the start and end time and then click Add to assign a time period within in the selected weekday Schedule Profile Select a schedule profile from the pull down list Action Set the Trigger Out function or select the destination that the captured images will be sent to or Record to SD Card Record to Network Storage Send Email FTP Upload or Instant Message Copyright 2012 TRENDnet All
4. User s Guide TRENDnet ye D Outdoor PoE Megapixel Day Night Internet Camera TV IPS22P TRENDnet User s Guide Contents Product OVENVICW sicvnrinnaiinsaasetstesranisnacibeanacasiuiansinnassessmnssiidanececeasnetianancins 2 Package Contents sccccsniicsccadssansetsaniianes deanavpudianarsiumeacdanyteanandeasawnedaanavadsemencdsusniansadeansia FS MES tt patina cette edentate 2 Product Hardware FO QUOT OS aaneen antennen teen 3 POD INGALION Dragi aiii raten deens 4 ISLAM ACI ON initia nat anndaenintandebeaanedninan denkenden diana indenken nik 4 Hardware Installation annnnnseneoennenrererenerersennennneersnenenenens nennen 4 Camera Installation ann anenreronnneereeennnneneeeneneersnenanenernennnnnnerennnnn 7 Starting Camera Finder IPSetupp ssssssssssnnnssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 9 CONTIQUPACON arini AE a 11 Viewing Camera Basic FuUnCtiIOnN esessssssseseerrrssennnnnrrrrrrssnnnnrrrrrssnrrrrrssenenenrrrrrrrennne 11 Configuring the Camera Setting cccsscccccccssssssresscceeessssesseeeeeeeessessseeeeeeessessessaeenegs 13 SAE VZ eenander 14 BAG eenen E T TT S A enen E neerde 15 NOON OTE arre S E E E E E E E E pnmuenesnenn 18 TRED on 21 Event SOVET eenen mertens iens Eor esteemed annen 25 Motion B CE cscs crte ects weirs aes ve deeseaa emcees eaters pooenn ad ae dencscuaa tunes sattinassaunsuedaneconcans 28 EVN CORE neemen vennen sma ermm wter ebantann 29 TONG aaneen nae E 32 FO AIET EASE AT
5. 3 Assemble the sun visor to the camera by using the provided screws and washers 5 Align the mounting bracket to the anchors that you hammer on step 1 and then use the provided screws to secure it Secure the camera to the mounting bracket amp O 6 Adjust the swivel ball on the mounting bracket to desired position 4 Assemble the camera mounting bracket to the camera by using the provided screws and washers Swival 7 The camera hardware installation is now completed Copyright 2012 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP322P Hardware Feature Camera Focus Open the front cover and adjust the lens focus by turning the lens ring slowly in either clockwise or counter clockwise direction Lens SD Card Slot The camera provides a SD card slot that allows you to install the memory card not included in the package to store files To install the memory card 1 Remove the back cover of the camera by unscrewing the three screws 2 Locate the SD card slot inside the camera and then insert the memory card into the slot Copyright 2012 TRENDnet All Rights Reserved 3 Replace the back cover and then screw the three screws SD Slot Waterproofing The camera is designed featuring waterproof However you need to protect the connectors from water soak For example you can tape the junction points of the connectors while you connect the cables or purchase a weatherp
6. Listen allows you to receive the on site sound and voice from the camera Multicast allows you to change the camera s transmission type on multicast Live View The Live View Image window displays the real time image of the connected camera The current compression mode of image is displayed above the Live View Image window Click the Zoom In buttons aauzitusleullScreenl for SXGA or for VGA QVGA QQVGA 720p above the Live View Image window to zoom in the live view image by 1x 2x 3x 1 2 1 4 or full screen Camera Information Displays the camera s location and the current date amp time The information can be modified in the Web Configuration Live View Setup Switch e Click the Live View button to configure the camera e Click the button to return to the Main screen to view the live view image Copyright 2012 TRENDnet All Rights Reserved 12 TRENDnet User s Guide TV IP322P If you are using Microsoft 7 Vista platform you may not be able to find the recorded files by Snapshot or Manual Record You will need to disable the protected mode of Security in the IE browser before recording a video file or taking a snapshot Please follow the below steps 1 Open IE Browser 2 Select Tools gt Internet Options 3 Select Security 4 Uncheck the Enable Protected Mode then press OK Copyright 2012 TRENDnet All Rights Reserved Configuring the Camera Setting To configure the camera cl
7. Medium High and Highest Frame Rate Select Auto or a proper setting depending on your network status e MJPEG Video Resolution Select the desired video resolution from the four formats SXGA VGA QVGA and QQVGA The higher setting VGA obtains better video quality while it uses more resource within your network Video Quality Select the desired image quality from five levels Lowest Low Medium High and Highest Frame Rate Select Auto or a proper setting depending on your network status The camera supports H 264 M PEG4 and MJPEG compression Please note that that MJPEG mode captures the images in JPEG format which requires higher bandwidth to view smooth video You can control the bandwidth of each connection well through the setting options above For the bandwidth information refer to the Appendix Bandwidth Reference Guide e 3GPP The camera supports 3GPP specification Select the Disable option to disable this feature Otherwise select 3GPP Without Audio or 3GPP With Audio to transfer the video clips without or with audio If you use a mobile phone that supports 3GPP you can also view the real time streaming image captured by the camera on your phone with the default player on the phone by entering the RTSP link Your mobile phone and the service provider must support 3GPP function Please contact your service provider when you are failed to use this service Copyright 2012 TRENDnet All Rights Reserved
8. TV IP322P Video amp Audio gt gt Audio Video amp Audio Audio Camera Microphone In e Camera Microphone In Select the Enable option to enable the camera s audio function so that you can receive the on site sound and voice from the camera e Camera Speaker Out Select the Enable option to enable the camera s external speaker function so that the connected speaker can play the sound and voice through the camera Change the volume by entering the proper value in the Volume option The default setting is 90 Video amp Audio gt gt Overlay Mask TRENDNET Outdoor PoE Megapixel Day Night Internet Camera TV IP322P Location 2012 10 01 12 07 56 Overlay Mask Smart Wizard Basic Network en Video Audio Overtay Mask Text Overlay Event Server eS Motion Detect Event Config Tools RS 485 SD Card Device Info Copyright 2012 TRENDnet All Rights Reserved 23 TRENDnet User s Guide TV IP322P This sub menu is used to set the image overlay and mask feature of the camera For example when you select the Include Date amp Time and Include Text options and click Apply you can see ai related information displayed on the live view image when e Image Overlay This item allows you to set the image overlay In the Image File button option click Browse to select the image file from your computer and then click you click the Upload You can click Preview to chec
9. bonjour e RTSP RTSP Streaming The camera supports three levels of RTSP access The default RTSP Port is 554 Disable RTSP link does not require authentication Pe Nouserame pssordrequred oo RTSP link prompts for authentication Username password are transmitted in plain text Username password are encrypted during data transmission hall RTSP link prompts for authentication TRENDnet recommends using RTSP Digest authentication method Disable and basic methods pose security risks Please verify if your RTSP client supports RTSP authentication method selected Multicast settings Configure the following settings so that you can deliver information from your camera to a set of receivers Group IP Assign a category of IP addresses to receive the information from the camera H 264 Port Assign a multicast port for H 264 in the text box The default port is 1234 M PEG4 Assign a multicast port for M PEG4 in the text box Port The default port is 1236 Audio Port Assign a multicast port for audio in the text box The default port is 1238 TTL Set the TTL value from 1 to 255 which is used to modify the time to live field in the IP header Copyright 2012 TRENDnet All Rights Reserved e QoS Live Video DSCP Assign the DSCP DiffServ Code Point of the stream video from the camera Live Audio DSCP Assign the DSCP DiffServ Code Point of the stream audio from the camera Net
10. factory default settings Reboot the device Backup the device configurations Click the button bellow and save the device configurations to your local harddrive Get the backup file Restore your device s configuration from a backup file _ Browse Restore Update Firmware Current Firmware Version 1 0 1 build 17 Select the firmware Browse Update Copyright 2012 TRENDnet All Rights Reserved Factory Reset Click Reset button to restore all factory default settings for the camera You can also do the physical reset by press the reset button on the camera Please refer to trouble shooting section question 2 for more detail System Reboot Click Reboot to restart the camera just like turning the device off and on The camera configuration will be retained after rebooting Configuration You can save your camera configuration as a backup file on your computer Whenever you want to resume the original settings you can restore them by retrieving the backup file Copyright 2012 TRENDnet All Rights Reserved camera e Update Firmware You can upgrade the firmware for your camera once you obtained a latest version of firmware Current Firmware Version This item displays the current firmware version Select the firmware Click Browse to locate the backup file and then click Update NOTE Make sure to keep the camera connected to the power source during the process of upgrading firmware Otherwise
11. server Share Assign the folder on the Network Storage server to share the files to users Path Assign the path for uploading the files on the Network Storage server For example test User Name Enter the user name to login into the Network Storage server Password Enter the password to login into the Network Storage server Split By When the file is too large to upload smoothly use this option to split it by selecting File Size or Recording Time When Storage Full Select Stop Recording or Recycle Delete Oldest Folder when the storage space on the Network Storage server is full Encode Format Select M PEG4 or H 264 as the encode format while recording File Format Select MP4 or AVI as the file format while recording e WAN IP Change Notify Select the option to enable the system to notify you when the WAN IP address changed NOTE The recorded video files in Network Storage are enclosed by AVI format without audio Copyright 2012 TRENDnet All Rights Reserved 27 TRENDnet User s Guide TV IP322P Event Server Setting gt gt Instant M essage Event Server Setting Instant Message test gmail com Jabber Password cc g Be E O Ba j Oo Manually Specify Server gt Enable Jabber Server Address talk google com 5222 Encrypt Connection V Enable Encrypt Authentication X Enable trendnettest1 gmail com TV IP322P Event Detect me Je eere NEE OOOO
12. time while you are using the Network Storage solution GPIO Trigger Out Interval GPIO Trigger Out Retention Time Per Event kl Limit the retention time of the GPIO Trigger Out function General Bohedule Profile Motion Trigger teneate Tope Event Configuration gt gt Arrange Schedule Profile GPIO Trigger Motion Detect Tools Event Configuration Arrange Schedule Profile RS 485 Schedule Profile SD Card Device Info Copyright 2012 TRENDnet All Rights Reserved e Schedule Profile This sub menu displays the scheduled profile s To customize the profile click Add and then enter a descriptive name for the profile in the prompt dialog window After entering the profile name click OK and the profile is added to the Schedule Profiles list To delete the profile select the profile in the list and click Delete Copyright 2012 TRENDnet All Rights Reserved 29 TRENDnet User s Guide TV IP322P Event Configuration gt gt Motion Detect Trigger Event Configuration Arrange Schedule Profile Re Event Configuration Motion Detect Trigger Motion Detect Trigger Please set the corresponding server setting first Schedule Profile always v u Trigger Out P Record to SD Card gn W 7 Record to Network Storage Weekdays J Mon Time List z Send Email fz FTP Upload Add JI Copy this to all weekdays Instant Message E HTTP Notify
13. to Camera Stand deliver sound via the camera e Microphone In Connects an external microphone to receive the on the spot sound where the camera is installed e Shield It is used to protect the camera for the inclement weather Several e GPIO Port Connects the external device that features additional controlling screw holes positions on the shield allows user to the shield forward backward function such as motion detection event triggering alarm notification and a variety of external control functions for the need NOTE Connected the external GPIO adapters before connecting to the external device to e Lens There are four IR lens for this camera GPIO port e Camera Stand the mounting stand to hold the camera e Ethernet PoE Port Plugs the provided network cable to connect to your local area network LAN If you are using the PoE you must have the network cable connect to your PoE switch or PoE Injector Copyright 2012 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP322P Application Diagram Installation Hardware Installation IP Camera Networking Solution 1 Use the included drill template to drill three mounting holes on the desire location and hammer the plastic anchors into the holes Drill Template Mobile Phone 2 Secured the provided screws to the camera Copyright 2012 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP322P
14. to the manual of the connected device Copyright 2012 TRENDnet All Rights Reserved 33 TRENDnet User s Guide TV IP322P RS 485 gt gt Patrol Zoom Speed Adjust the speed 1 10 while zooming the lens Focus Speed Adjust the speed 1 10 while focusing the lens TRENDNET Outdoor PoE Megapixel Day Night Internet Camera Zoom In Zoom Out Click to zoom in out the live view image TV IP322P Focus Far Focus Near Click to adjust the focus by far near Location 2012 10 01 12 16 56 RS 485 Patrol Setting n lt a 7 a e Patrol Position This field allows you to set the positions for camera s patrolling dor 1 Select a preset position from the Preset Position pull down list and then vd click Add to be Patrol Position The preset position will be added to the Patrol Path list 2 From the Patrol Path list you can change the patrolling order by selecting et Yun ae oe a position and clicking Up or Down You can also delete a position by a e Home gt ss Apply Add to be Patrol Position clicking Remove Event Config Patrol Position 3 ind 3 You can change the stay time for each position when the camera is patrolling Select a position in the Patrol Path list and then enter a time setting in the text box below the Stay Time list Click Update to save the setting The Stay Time list displays the current setting for each position 4 When done click Save Smart Wizard Basic Network Vi
15. your home router An account from any of the listed DDNS providers is required prior to this Operation Configure DDNS on your Camera 1 Goto Camera s DDNS Setting page click Enable to activate the feature Then select a DDNS provider from the list DDNS Setting Enable Provider www dyndns com Host Name User Name web easydns com i www EuroDynDNS org www no ip com www ovh com www regfish com Password 2 Enter your DDNS s the Host Name User Name and Password DDNS Setting Enable Provider www dyndns com Host Name trendnet dyndns org User Name trendnet Password eecescccsecceses Ports Number HTTP Port 9000 default 80 3 Inthe Port Number section assign an HTTP port of the camera The default HTTP Port on the camera is 80 The example shows above Is using port number 9000 3 TRENDnet User s Guide TV IP322P 4 Open another web browser and go to your Router s Web Configuration page In the example TRENDnet s TEW 651BR Wireless N router is used TRENDnet ain Wireless Status Roung Access Filter Virtual Server Special AP DMZ Firewall Rule Management oos 150Mbps Wireless N Home Router TEW 651BR Virtual Server Help pme SS sene O mal ml N jemen Jem hom Virtual Server SMTP 0 0 0 0 Virtual Server POP3 0 0 0 0 Virtual Server Telnet 0 0 0 0 PPTP Terrana oooo Copyright 2009 TRENDnet All Rights Re
16. DDNS Setting and IP Filter Network Network TRENDNET Outdoor PoE Megapixel Day Night Internet Camera DHCP TV IP322P en atic Location 2012 10 01 11 56 43 IP Subnet Mask Default Gateway Primary DNS Smart Wizard J Static IP Secondary DNS IP Network Default Gateway Primary DNS Password Secondary DNS DDNS Setting IP Filter Enable Provider www dyndns com Video Audio User Name Host Name Event Server Password User Name DDNS Setting Motion Detect F Enable Password Ports Number HTTP Port 80 default 80 Provider www dyndns com Event Config anata Host Name Tools User Name Password RS 485 Enable Ports Number HTTP Port 80 default 80 e IP Setting This item allows you to select the IP address mode and set up the Copyright 2012 TRENDnet All Rights Reserved related configuration DHCP Select this option when your network uses the DHCP server When the camera starts up it will be assigned an IP address from the DHCP server automatically This is the default IP setting on the camera Static IP Select this option to assign the IP address for the camera directly You can use IP Setup to obtain the related setting values IP Enter the IP address of the camera The default setting is 192 168 10 30 Copyright 2012 TRENDnet All Rights Reserved 18 TRENDnet User s Guide TV IP322P
17. IP of the HTTP server cea Port Enter the Port number of the HTTP server tin User Name Enter the username of the HTTP server SD card Password Enter the password of the HTTP server Query Enter the query parameter for the request if necessary ogi event ogi status s amp time ti Device Info Example Host 192 168 10 1 Port 80 Query xxx cgi namel valuel amp name2 value2 Ex cgi event cgi status s amp time amp model nodelname Result Copyright 2012 TRENDnet All Rights Reserved Copyright 2012 TRENDnet All Rights Reserved 25 TRENDnet User s Guide TV IP322P Event Server Setting gt gt FTP Event Server Setting FTP Event Server Setting gt gt Email dl Event Server Setting Email Host Address 656463 62 Port Number Email Sender Email Address john mymail com This server requires an encrypted connection V SSL STARTTLS a Authentication Mode None SMTP Sender User Name john smith Directory Path test One Snapshot FTP Upload With Pre event sec s Post event sec s Pre event and Post event actions are unavailable with SXGA resolution sd seoses O S ress Host Address Enter the IP address of the target FTP server Port Number Enter the port number used for the FTP server Address User Name Enter the user name to login into the FTP server One Snapshot Send Email With Pre event sec s Post event Y sec s B Pa
18. RIZED ATTEMPTS TO REPAIR OR MODIFY OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE OR BY ACCIDENT FIRE LIGHTNING OR OTHER HAZARD LIMITATION OF LIABILITY TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY WHETHER BASED IN CONTRACT OR TORT INCLUDING NEGLIGENCE FOR INCIDENTAL CONSEQUENTIAL INDIRECT SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR FOR LOSS OF REVENUE OR PROFITS LOSS OF BUSINESS LOSS OF INFORMATION OR DATE OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE INSTALLATION MAINTENANCE USE PERFORMANCE FAILURE OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES AND LIMITS ITS LIABILITY TO REPAIR REPLACEMENT OR REFUND OF THE PURCHASE PRICE PAID AT TRENDNET S OPTION THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE Governing Law This Limited Warranty shall be governed by the laws of the state of California Some TRENDnet products include software code written by third party developers These codes are subject to the GNU General Public License GPL or GNU Lesser General Public License LGPL Go to http www trendnet com gpl or http www trendnet com Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers TRENDnet does not p
19. Rights Reserved 30 TRENDnet User s Guide TV IP322P Event Configuration gt gt Schedule Trigger Event Configuration Schedule Trigger Enable Schedule Profile always w Schedule Profile always w JE 2 H g E 2 i in in Network Storage Schedule Schedule Profile always w Ww Qo ses S You can separately configure the schedule for trigger function of the camera by Email FTP or Network Storage Select the Enable option on each item and then select a Schedule Profile from the pull down list and set the Interval time NOTE Ifthe setting value of the Network Storage Recording Time Per Event option in General Setting is longer than the Interval time in Network Storage Schedule the recorded file will be a continuous video clip For example if you set the Network Storage Recording Time Per Event as 10 seconds and the Interval as 5 seconds recorded file becomes a non stop video clip because the camera will record a 10 second video clip every 5 seconds Copyright 2012 TRENDnet All Rights Reserved Event Configuration gt gt GPIO Trigger Event Configuration GPIO Trigger GPIO Trigger Enable Trigger In 1 C Schedule Profile always w E Trigger Out E Record to SD Card C Record to Network Storage L Send Email C FTP Upload L instant Message E HTTP Notify Enable Trigger In 2 C Schedule Profile always v L Trigger Out E Record to SD Card Record to Netw
20. SCP 2 Select the Provider from the pull down list 3 Enter the required information in the Host Name User Name and Password boxes e HTTPS NOTE You have to sign up for DDNS service with the service provider before configuring this Enable Select this option to enable HTTPS which is a secure protocol to iene provide authenticated and encrypted communication within your network e UPnP The camera supports UPnP Universal Plug and Play which is a set of HTTPS Port Assign a HTTPS port in the text box The default HTTPS port is computer network protocols that enable the device to device interoperability 443 In addition it supports port auto mapping function so that you can access the camera if it is behind an NAT router or firewall Select the Enable option to enable this feature e Bonjour The devices with Bonjour will automatically broadcast their own services and listen for services being offered for the use of others If your browser with Bonjour you can find the camera on your local network without e UPnP Port Forwarding select this option to have the port forward to router knowing its IP address e Ports Number HTTP Port The default HTTP port is 80 Copyright 2012 TRENDnet All Rights Reserved 19 TRENDnet User s Guide TV IP322P The Apple Safari is already with Bonjour You can download the complete Bonjour for Internet Explorer browser from Apple s web site by visiting http www apple com
21. Settings Basic The last step shows the configuration of your camera When you confirm the The Basic menu contains three sub menus that provide the system settings for the settings click Apply to finish the wizard and reboot the camera Otherwise camera such as the Camera Name Location Date amp Time and User management click Prev to go back to the previous step s and change the settings or click Cancel to end the wizard and discard the changes TRENDNET Outdoor PoE Megapixel Day Night Internet Camera Confirm Settings TV IP322P boester Primary DNS 192 168 10 1 seconds SMTP Server Address myserver com Location 2012 10 01 11 52 04 ETS Basic System Setup TV IP322P Smart Wizard Indication LED Basc Indication LED Control Normal OFF zeem IR CUT amp IR LED Date amp Time IR CUT Control Network ba eee Video Audio Event Server Sender User Name john smith Event Config Tools RS 485 SD Card Receiver 1 Email mary myserver com Address Receiver 2 Email tom mailserver com Address Device Info Copyright 2012 TRENDnet All Rights Reserved Copyright 2012 TRENDnet All Rights Reserved 15 TRENDnet User s Guide TV IP322P Basic gt gt System Basic System Basic w OO Indication LED indication LED Control Normal OFF IR CUT amp IR LED Rou cet IR LED D OFF ON e Basic This item allows you to assign the camera
22. Some router might use Port Forwarding or Special applications for this function The setup steps should be very similar Open another web browser and enter your DDNS domain and camera s port number http yourDomainName PortNumber New Tab Windows Internet Explorer Er iz d http trendnet dyndns org 9000f The camera login page will appear Copyright 2012 TRENDnet All Rights Reserved TV IP322P Technical Specifications Image amp Video Pan Tilt Zoom Sensor 1 3 Megapixels color CMOS sensor Resolution 1280 x 1024 pixels Board Lens Focal Length 12mm Aperture F No F1 8 Minimum illumination 0 Lux Night vision Viewing Angle e Diagonal 28 5 degree e Horizontal 22 7 degree e Vertical 17 2 degree Compression H 264 MPEG 4 and M JPEG Exposure white balance gain control automatic Built in ICR External microphone in Sensitivity 48dB 3dB Frequency 50 16000HZz S N gt 60dB Format PCM AMR Protocol Pelco D Pelco P 32 presets Auto Patrol Ground GPIO in out RS485 12V DC 24V AC Supports SD SDHC up to 32GB IEEE 802 3u 10 100M bps Fast Ethernet IEEE 802 3af PoE 40 TRENDnet User s Guide Reset Button Reboot or restore to factory default Power Over PoE Power on RJ 45 pin 3 6 for Power and pin 1 2 for Ethernet Power Power 9 5 Watts max Consumption Input 100 240V AC 0 5A 50 60Hz Output 12VDC 1 5A external power adapter for non PoE ins
23. T AEE A T A EN TE 33 DCA ean E EEEE 35 VIC MAM OF AE E E E A E 36 How to setup access the camera behind a Router ssssssssssssssseeeseeees 37 Copyright 2012 TRENDnet All Rights Reserved Table of Contents Technical Specifications nnnaansnnnnnnnnnnnnennennenennnnnnnnnnnnnnnnnnnnnnnnnnnneenneenn Troubleshooting TRENDnet User s Guide TV IP322P Product Overview Features The SecurView Pro Outdoor PoE M egapixel Day Night Internet Camera model TV IP322P provides powerful M egapixel night vision in complete darkness for up to 20 meters 66 feet This camera is outdoor installation ready with an IP66 rated weather proof and vandal proof outdoor enclosure No need to install this camera near a power source power and data are received through a single Ethernet cable using Power over Ethernet PoE technology TV IP322P Record 1280 x 1024 pixel SXGA H 264 video at up to 15 frames per second fps or 640 Package Contents x 480 pixel VGA resolution at up to 30 fps Manage up to 32 TRENDnet cameras with e TV IP322P the included complimentary camera management software Advanced features include e Quick Installation Guide motion detection recording email alerts scheduled recording sessions H 264 M PEG 4 e CD ROM Utility amp User s Guide image compression 3GPP support Samba client support Input Output ports to e GPIO Connector 2 pcs network to alarm systems date and time and other text overlays mask overla
24. and Password admin and press OK to access to the main screen of the camera s Web Configuration Windows Security al The server 192 168 10 30 at netcam requires a username and password Warning This server is requesting that your username and password be sent in an insecure manner basic authentication without a secure connection gy Aa Pser name F a Remember my credentials NOTE If you are initially access to the camera you will be ask to install a new plug in for the camera Permission request depends on the Internet security settings of your computer Click Install or Yes to proceed 11 TRENDnet User s Guide TV IP322P After you login into the Web Configuration of the camera the main page will appear as below TRENDnet Outdoor PoE Megapixel Day Night Internet Camera TWIPS22eP The Main screen of the Web Configuration provides you with many useful information and functions including Compression Buttons Select to transmit and record the video using H 264 M PEG4 or MJPEG compression Function Buttons Manual Record allows you manually record and save a video clip Snapshot allows you to capture and save a still image Browse allows you to assign the destination folder to store the video clips and still images Talk allows you to speak out through the camera Please note only one user is allowed to use this function at a time
25. ay Night Internet Camera TV IP322P Location AMMO 12 45 48 system Information Device Information Video amp Audio Smart Wizard Basic Network Video Audio Event Server Motion Detect Event Config Tools RS 485 SD Card Device Info Device Info System Log Locations 1 0 1 build 17 Video amp Audio Microphone In E Speaker Out Network IPv4 Subnet Mask IPv4 Gateway 192 168 10 10 Primary DNS Address 192 168 10 10 Secondary DNS address febO 214 d1 fF fef2 fads FFFE FF FF F FFF 80 Copyright 2012 TRENDnet All Rights Reserved Copyright 2012 TRENDnet All Rights Reserved Pv Subnet Mask IFvd Gateway Primary DNS Address secondary DNS address IPG Address DEE TEE 255 0 Lee ee ee ze 165 10 10 152 165 10 10 fe80 214 d ff fef2 fds 36 TRENDnet User s Guide Device Info gt gt System Logs TRENDnet Ge se Smart Wizard Basic Network Video Audio Event Server Motion Detect Event Config Tools RS 485 SD Card Device Info Device Info System Log The Logs table displays the events log recorded by the system Outdoor PoE Megapixel Day Night Internet Camera TV IP322P Location 2012 40 01 12 51 31 System Information Logs Copyright 2012 TRENDnet All Rights Reserved Copyright 2012 TRENDnet All Rights Reserved TV IP322P You can either setup the Dynamic DNS connection via camera itself or
26. camera s location to reduce the noise 50Hz or 60Hz Copyright 2012 TRENDnet All Rights Reserved AE Control Select AE Auto Exposure speed as Fast Normal or Slow Frequency AE Control Time AE Control Night Time min min shutter speed Night Mode Choose either Color or Mono for the night mode option If it is in a low lux environment and must viewing image in color please select Color with IR off to prevent the color distortion If the environment is completed dark please select Mono with IR on Video amp Audio gt gt Video Video amp Audio Video H 264 MPEG4 MJPEG SXGA v Video Quality High Frame Rate 15 Y fps 3GPP Y Disable 2GPP Without Audio T 3GPP With Audio e H 264 Video Resolution Select the desired video resolution from the four formats SXGA VGA QVGA and QQVGA The higher setting VGA obtains better video quality while it uses more resource within your network 22 TRENDnet User s Guide Video Quality Select the desired image quality from five levels Lowest Low Medium High and Highest Frame Rate Select Auto or a proper setting depending on your network status e MPEG4 Video Resolution Select the desired video resolution from the three formats VGA QVGA and QQVGA The higher setting VGA obtains better video quality while it uses more resource within your network Video Quality Select the desired image quality from five levels Lowest Low
27. click the Download button to download the file SD Card Dismount Safely dismount SD Card Dismount SD Card Information Total space 7976 Mb When Storage Full Stop Recording Recycle Delete Oldest Folder SD Card File Manager Smart Wizard File Manager E 20121001 s File Name 20121001 12 124620 mp4 EE 12 N 2D en E 124620 mp Video Audio El 124735 mp4 a 124904 mp4 id 124934 mp4 Event Server Encode Format MPEG4 H 264 Motion Detect 125059 mp4 125140 mp4 125249 mp4 125316 mp4 MP4 Event Config AVI 125418 mp4 125452 mp4 El 125535 mp4 Tools RS 485 SD Card SD Card File Manager Device Info Copyright 2012 TRENDnet All Rights Reserved SD Card gt gt SD Card Setting e SD Card Dismount Click Dismount to safely remove the SD card that is installed in the camera Note You must disable the event trigger in order to dismount the SD Card e SD Card Information Displays the information of the installed SD card including the Total space and Free space e SD Card Setting Copyright 2012 TRENDnet All Rights Reserved 35 TRENDnet User s Guide TV IP322P Device Info Device Info gt gt Device Info The Information menu displays the current configuration and events log of the camera Display the Basic Video amp Audio and Network settings of the camera System Information Device Information TRENDnet Outdoor PoE Megapixel D
28. d Warranty AC DC Power Adapter Cooling Fan and Power Supply carry 1 year warranty If a product does not operate as warranted during the applicable warranty period TRENDnet shall reserve the right at its expense to repair or replace the defective product or part and deliver an equivalent product or part to the customer The repair replacement unit s warranty continues from the original date of purchase All products that are replaced become the property of TRENDnet Replacement products may be new or reconditioned TRENDnet does not issue refunds or credit Please contact the point of purchase for their return policies TRENDnet shall not be responsible for any software firmware information or memory data of customer contained in stored on or integrated with any products returned to TRENDnet pursuant to any warranty There are no user serviceable parts inside the product Do not remove or attempt to service the product by any unauthorized service center This warranty is voided if i the product has been modified or repaired by any unauthorized service center ii the product was subject to accident abuse or improper use iii the product was subject to conditions more severe than those specified in the manual Warranty service may be obtained by contacting TRENDnet within the applicable warranty period and providing a copy of the dated proof of the purchase Upon proper submission of required documentation a Return Material Authori
29. deo Audio We ica OE mmm ne ia Sed ra Event Server zi pb E Patrol Path Stay Time Up Down Remove Update Copyright 2012 TRENDnet All Rights R Device Info The Patrol function provides the patrol control settings for the connected camera e Preset Position To set the preset position for the connected camera 1 Use the Navigation buttons to move the camera lens to the desired position 2 Select a Position number Home 2 32 from the Preset Position pull down list 3 Enter the descriptive name for the location in the text box Click Apply Pan Speed Adjust the moving speed 1 10 while panning the lens Tilt Speed Adjust the moving speed 1 10 while tilting the lens Copyright 2012 TRENDnet All Rights Reserved 34 TRENDnet User s Guide TV IP322P SD Card When Storage Full Select Stop Recording or Recycle Delete Oldest Folder a when the storage space on the SD card is full Encode Format Select M PEG4 or H 264 as the encode format while recording File Format Select MP4 or AVI as the file format while recording The SD Card menu allows you to set the SD card function Installed in the camera Y TRENDNET Outdoor PoE Megapixel Day Night Internet Camera Teese SD Card gt gt File Manager Location 2011 01 01 00 32 33 l The File Manager menu allows you to download files from the SD card Select the desire REEE EERON ee file and
30. e the Auto Run program Click the Camera Finder IPSetup from the Auto Run menu screen amp TRENDnet TV IP322P TRENDNET Install Camera Install SecurView Pro Quick Installation Guide User s Guide Product Registration Exit Outdoor PoE Megapixel Day Night Internet Camera TVAP3S22P TRENDnet User s Guide TV IP322P 2 Click Install 5 Setup P5etup Ready to Install Setup is now ready to begin installing IPSetup on your computer Click Install to continue with the installation 3 Click Finish o Setup IPSetup Completing the IPSetup Setup Wizard Setup has finished installing IPSetup on your computer The application may be launched by selecting the installed icons Click Finish to exit Setup Copyright 2012 TRENDnet All Rights Reserved al 6 After installing the IPSetup utility the application is installed to your computer and creates a folder in Start Program TREN Dnet IPSetup Click Start gt Programs gt TRENDnet gt PSetup and then click IPSetup TRENDnet IPSetup gt IPSetup_ amp Uninstall PSetup ke SecurView Pro i 4 Back The IPSetup window will appear It will search for the cameras within the same network il wi IP Address Device Name MAC Address 192 168 10 30 T IP322P FF FF FF FFIFF FF Camera Display Area 10 TRENDnet User s Guide TV IP322P Camera Display Area By defa
31. for the region from the pull down menu Automatically adjust clock for daylight saving time changes select this option for daylight saving Synchronize with PC Select this option and the date amp time settings of the camera will be synchronized with the connected computer Synchronize with NTP Server Select this option and the time will be synchronized with the NTP Server You need to enter the IP address of the server and select the update interval in the following two boxes Manual Select this option to set the Date and Time manually 16 TRENDnet User s Guide TV IP322P Basic gt gt User NOTE The General User is allowed to access the camera and control the Function buttons on the Main screen of the Web Configuration the Guest can only view the live view image from the Main screen while accessing the camera Only the Basic User Administrator is allowed to configure the camera through the Web Configuration User Accounts Administrator oni e Direct Video Stream Authentication Confirm Password To steam the video directly without going through the configuration page you General User eee can access it via Internet Password Enable User needs to enter user name and password to stream the camera UserList Disable User can stream the camera without entering the user name and ey password a hdi bddMdodhe Examples of the direct link to video H 264 Mode aia Dese h
32. go do not have a DHCP server or DHCP is disable on my network and I am unable to configure the TV IP322P What should I do a Goto the TCP IP settings on your computer and assign a static IP address on your computer s network adapter in the subnet of 192 168 10 x Since the default IP address of the TV IP322P is 192 168 10 30 do not assign a static IP address of 192 168 10 30 on your computer s network adapter b Open Internet Explorer and enter http 192 168 10 30 into the address bar 42 TRENDnet User s Guide TV IP322P 4 The image is blurry How can I adjust the focus on the IP camera Open the front cover of the TV IP322P Adjust the lens focus by turning the lens ring slowly in either clockwise or counter clockwise direction 5 When I click on Live View the image does not load a Make sure that you are using a browser that supports Activex b Make sure that ActiveX is installed Copyright 2012 TRENDnet All Rights Reserved forgot my password What should I do Open the front cover of the TV IP322P Located the reset button and press it for 10 seconds and let go Wait for 60 seconds for camera rebooting then login to IP camera 43 TRENDnet User s Guide TV IP322P Limited Warranty TRENDnet warrants its products against defects in material and workmanship under normal use and service for the following lengths of time from the date of purchase TV IP322P 3 Years Limite
33. he Utility CD ROM into my computer s CD ROM Drive but the installation menu does not appear automatically What should I do Windows 7 If the installation menu does not appear automatically click on the Windows Icon on the bottom left hand corner of the screen click the Search programs and files box and type D autorun exe where D in D autorun exe is the letter assigned to your CD ROM Drive and then press the ENTER key on your keyboard Windows Vista If the installation menu does not appear automatically click Start click the Start Search box and type D autorun exe where D in D autorun exe is the letter assigned to your CD ROM Drive and then press the ENTER key on your keyboard Windows XP If the window does not appear automatically click Start click Run and type D autorun exe where D in D autorun exe is the letter assigned to your CD ROM Drive and then press the ENTER key on your keyboard IP Setup is unable to detect my camera What should do a Verify that you have followed all the steps in Section 2 Hardware Installation b Disable any software firewall programs such as ZoneAlarm or Norton Internet Security If you are using Windows 7 Vista or XP disable the built in firewall c Click on Search in IPSetup d Reset the IP Camera e Remove the front cover Copyright 2012 TRENDnet All Rights Reserved e Take a pen and press the reset button for 10 seconds then let
34. ice Info Copyright 2012 TRENDnet All Fights Reserved To enable the detecting area select Window 1 2 3 from the pull down list and then select Enable When the detecting area is enabled you can use the mouse to move the detecting area and change the area coverage e Name Assign aname to the detecting area e Threshold M ove the slide bar to adjust the level for detecting motion to record video NOTE Sliding the Threshold bar to the right will decrease the sensitivity of motion detection sliding the Threshold bar to the left will increase the sensitivity of motion detection 28 TRENDnet User s Guide TV IP322P Event Config Event Configuration gt gt General Setting The Event Config menu contains five sub menus that provide the commands to Event Configuration General Setting configure event profiles General Filename Prefix l Snapshot Recording Filename Prefix TRENDNET Outdoor PoE Megapixel Day Night Internet Camera TV IP322P 20 secs Recording Interval Network Storage Recording Time Per Event a er 20 secs Location 2012 10 01 12 26 27 GPIO Trigger Out Interval GPIO Trigger Out Per Event Event Configuration General Setting General ns Snapshot Recording Filename Prefix e General Smart Wizard i eee Filename Prefix Snapshot Recording Subfolder You can assign a rohit imbibe arn jd Recording interval Storage Recording Time Per Event Limit the wdd recording
35. ick on the Main screen of Web Configuration The Web Configuration will start from the Basic page Y TRENDNET Outdoor PoE Megapixel Day Night Internet Camera TV IP322P Location 2012 10 01 11 47 32 Yer Live View Basic System 9e Setup Basic EEO Smart Wizard Indication LED Basic Indication LED Control Normal OFF gt System IR CUT amp IR LED Date amp Time User IR CUT Control Auto em VIES AUS Event Server Motion Detect Event Config Tools RS 485 SD Card Device Info Copyright 2012 TRENDnet All Rights Reserved The Web Configuration contains the settings that are required for the camera in the left menu bar including Smart Wizard Basic Network Video Audio Event Server Motion Detect Event Config Tools RS 485 SD Card and Device Info 13 TRENDnet User s Guide TV IP322P Smart Wizard The camera s Smart Wizard lets you configure your camera easily and quickly The wizard will guide you through the necessary settings with detailed instructions on each step To start the wizard click Smart Wizard in the left menu bar e Camera Setting By default the camera name is set as model number Change the name if necessary Enter the location and administrator password twice Y TRENDNET Outdoor PoE Megapixel Day Night Internet Camera TV IP322P Location 2012 10 01 11 49 10 Welcome to the Smart Camera Setting Wizard This wizard will help you quickly set up
36. ight 2012 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP322P 5 Connect a network cable to the camera s network port and then to your network If you are using PoE please ensure the cable is connected to a PoE switch or PoE injector amp TRENDnet TV IP322P Connect the network cable Connect a network cable to the camera s network port and then to your router If you are using PoE please ensure the cable is connected to a PoE switch or PoE injector 6 Wait while camera is searching amp TRENDnet TV IP322P Searching for cameras Please wait Copyright 2012 TRENDnet All Rights Reserved The founded cameras will show on the screen The camera already selected by default if you have only one camera installed If you have more than one camera in the same Network you will need to identify the camera by the MAC address amp TRENDnet TV IP322P Select your camera The following cameras were detected on your network Check the MAC address of the IP Camera you are going to setup and select it from the list Model Mac Address TVIP322P XXXXXXXXXXXX if you don t see your camera s MAC address confirm that the camera is powered up confirm your computer is connected to your network and then click the Retry button 8 Type in the Password The password is admin by default We strongly suggested changing the camera s password The Change Password option is enable by defa
37. ion protocols It offers a way to upgrade a plain text connection to an encrypted TLS or SSL connection Authentication Mode Select None to disable the authentication feature or select SMTP and then enter the User Name and Password according to the mail server configuration Sender User Name Enter the user name to login the mail server Sender Password Enter the password to login the mail server Receiver 1 Email Address Enter the first email address of the user who will receive the email Receiver 2 Email Address Enter the second email address of the user who will receive the email Send Email With Set the format of the image that is to be sent by the email You can set the format as One Snapshot or images containing Pre Event Server Setting gt gt Network Storage Event Server Setting Network Storage Network Storage meneer yS me Password File Size 100 MB Recording Time 30 Minutes Stop Recording When Storage Full Recycle Delete Oldest Folder MPEG4 Encode Format H 264 event 0 3 seconds and Post event 0 3 seconds MP4 File Format AVI NOTE The Pre Event or Post Event only works when video resolution set up to 720P or lower It will not work with SXGA resolution Due to the network speed environment the camera may not be able upload all number of the images that you set Network Storage Samba Server Address Enter the IP address of the Network Storage
38. k the image size and adjust the image position before clicking Upload The preview image area is displayed with red dotted line If you want to remove the preview image before uploading click Delete Since you click Upload the preview image area is displayed with white Y TRENDNET Outdoor Pe dotted line Click Enable and set the transparency setting by whether selecting the Transparent option or not When done click Apply You can see the image overlay on the live view image when you click Live View e i P Pei ag gt Network Camera i NOTE The width and height of the input overlay graphic should be multiple of 4 at a maximum size of 43690 pixels and in JPG or BMP 24 bit RGB format Manual Record Privacy M ask This item allows you to configure up to two mask areas Select the Zo area 1 or 2 from the Window pull down list and then click Enable You can change Browse the size and position of the area by holding and dragging the mouse You can also Talk change the color of the mask area by clicking the Color box and then selecting the ns color you want When done click Apply You can see the mask area s on the live view image when you click Live View Video amp Audio gt gt Overlay Mask gt gt Text Overlay This page is used to set the text overlay feature of the camera including the following three options date amp time heading text and background transparency setting e Include Date amp Time Select this
39. name and location information Camera Name Enter a descriptive name for the camera which is helpful to identify the camera easily while multiple cameras are connected within the network Location Enter a descriptive name for the location where is monitored by the camera Language Default Select the displayed language as default e Indication LED This item allows you to set the LED illumination as desired There are two options Normal and OFF e IR CUT amp IR LED The camera features ICR function IR CUT Filter and IR LED allowing you to capture clear image when environment light changed IR CUT Control Set the ICR function IR CUT filter for the camera Auto mode or Off mode In Auto mode the lens filter will be switched automatically to capture black and white image when the change of environment light is detected by the camera s light sensor IR LED Enable or disable the camera s IR LED manually by selecting ON or OFF Copyright 2012 TRENDnet All Rights Reserved Basic gt gt Date amp Time Basic Date amp Time Date and Time GMT 08 00 Pacific Time US amp Canada Tijuana E Automatically adjust doc for daylight saving time changes Synchronize with PC HTP Server Address Update Interval amp hour i Manual Date 2012 10 01 Coy MADD Time 11 53 00 hh mm ss Date amp Time Enter the correct date and time for the system TimeZone Select the proper time zone
40. nn n Dynamic DNS oe New Tab Windows Internet Explorer F ee nn Password _ ended Disabled 7 Camera s login page will appear i tme D y 4 2 d 5 z s Dynamic DNS Wireless Status Routing Access Management ooIs B http trendnet dyndns org 9000f Configure DDNS on your router 1 Goto Camera s DDNS gt Ports Number section assign a HTTP port for your camera and click Apply DDNS Setting Fl Enable Provider www dyndns com v Copyright 2009 TRENDnet All Rights Reserved Host Name User Name Password 4 Enable DDNS fill out the following information and then click Apply Dynamic DNS hep pons Enabled Disabled ee Nome O O 2 Login to your router s web configuration page trendnet meme Oo HostName trendnet dyndns org Copyright 2012 TRENDnet All Rights Reserved 39 TRENDnet User s Guide gt 7 Go to Virtual Server section and create a new entry Enable Click Enable Name Enter the application name eg Camera Name Protocol Select TCP Private Port The HTTP port that you assign on your Camera Public Port The port used on remote side to access to your Camera LAN Server The local IP address of your Camera Help Enable Disabled Virtual Server IP Camera en SSS Cn Click Add to add the application Please refer to your router s user s manual for detail Virtual Server setting
41. option to display the date amp time information on the live view image e Include Text Select this option and enter your heading text in the box to display the text information on the live view image e Enable Opaque Select this option to display the overlay text with a background color Copyright 2012 TRENDnet All Rights Reserved 24 TRENDnet User s Guide TV IP322P Event Server Event Server Setting gt gt HTTP The Event Server menu contains four sub menus that allow you to upload images to FTP Event Server Setting HTTP send emails that include still images and store the images to a NAS system as a r When you complete the required settings for HTTP FTP Email or Network Storage click Test to test the related configuration is correct or not Once the camera connects to the server successfully click Apply pe S w w s a wl zi cgi event cgi status s amp time t d 2 HTTP Notify For GPIO 1 Trigger a a ew o TRENDNET Outdoor PoE Megapixel Day Night Internet Camera TV IP322P Location 2012 10 01 12 13 16 Event Server Setting HTTP passwort S cgi event cgi status s amp time t HTTP Notify For Motion Trigger Smart Wizard HTTP Notify For GPIO 2 Trigger mee username En cgi event cgi status s amp time t eee ml SESER a e HTTP Notify For Motion Trigger oe Send the query parameter via an HTTP notification when an event is triggered Host Enter the
42. ork Storage C Send Email FTP Upload E instant Message C HTTP Notify e GPIO Trigger Select the Enable Trigger In 1 2 option to enable the GPIO trigger function of the camera so that you can set Trigger Out function or send captured images within the detecting area to the SD card FTP server email receiver Network Storage server or send an instant message Event server has to be configured prior to using the functions Schedule Profile Select a schedule profile from the pull down list Action Set the Trigger Out function or select the destination that the captured images will be sent to Record to SD Card Record to Network Storage Send Email FTP Upload or Instant M essage 31 TRENDnet User s Guide TV IP322P Tools Backup Click Get the backup file to save the current configuration of the camera The Tools menu provides the commands that allow you to restart or reset the camera P y Restore Click Browse to locate the backup file and then click Restore You can also backup and restore your configuration and upgrade the firmware for the TRENDNET Smart Wizard Basic Network Video Audio Event Server Motion Detect Event Config Tools RS 485 SD Card Device Info Outdoor PoE Megapixel Day Night Internet Camera TVIP322P Location 2012 10 01 12 27 29 System Tools Tools Factory Reset Factory reset will restore the device s
43. roof cable power cord protector TRENDnet User s Guide TV IP322P Camera Installation 3 Write down the MAC address of your camera 1 Insert the Installation CD ROM into your computer s CD ROM drive to initiate Aiba A the Auto Run program Write down the MAC address of your camera This information is required in the installation process The MAC address is located on the amp TRENDnet TV IP322P camera label shown in photo below TRENDNET meet ae MODEL NO Ty P322P A _ _ SERIAL NO Install Camera Camera Finder IPSetup FIW XXXXX HW V1 0 MADE IN TAIWAN Install SecurView Pro Ne Wad Quick Installation Guide r_n User s Guide se Product Registration Li Exit Outdoor PoE Megapixel Day Night Internet Camera TVAP32eP 4 If using PoE please skip to the next step For non PoE user please plug and connect the power adapter to the camera Please wait for 60 seconds for the camera to boot up 2 Click the Install Camera amp TRENDnet TV IP322P LY TRENDNET ajx 7 Power up the camera if using PoE to supply power to the camera please skip to the next step Plug in and connect the powr adapter to the camera Allow 60 seconds for the camera Ir ne to boot up Camera Finder IPSetup Install SecurView Pro gt Je Quick Installation Guide User s Guide R Product Registration U Outdoor PoE Megapixel Exit Day Night Internet Camera TVAPS22P Copyr
44. rovide technical support for these codes Please go to http www gnu org licenses gpl txt or http www gnu org licenses Igpl txt for specific terms of each license 44 TRENDNET Product Warranty Registration Please take a moment to register your product online Go to TRENDnets website at http www trendnet com register TRENDnet 20675 Manhattan Place Torrance CA 90501 USA Copyright 2012 All Rights Reserved TRENDnet
45. served Copyright 2012 TRENDnet All Rights Reserved 5 Go to Virtual Server section and create a new entry Enable Click Enable Name Enter the application name eg CameraName Protocol Select TCP Private Port The HTTP port that you assign on your Camera Public Port The port used on remote side to access to your Camera LAN Server The local IP address of your Camera Virtual Server ep Enable Disabled MC aoe Then click Add to add the application Please refer to your router s user s manual for detail Virtual Server setting Some router might use Port Forwarding or Special applications for this function The setup steps should be very similar Name Protocol LAN Server Virtual Server FTP TCP 21 21 0 0 0 0 Virtual Server HTTP TCP 80 80 0 0 0 0 Virtual Server HTTPS TCP 443 443 0 0 0 0 Virtual Server DNS UDP 53 53 0 0 0 0 Virtual Server SMTP TCP 25 25 0 0 0 0 Virtual Server POP3 TCP 110 110 0 0 0 0 Virtual Server Telnet TCP 23 23 0 0 0 0 PPTP TCP 1723 1723 0 0 0 0 NetMeeting TCP 1720 1720 0 0 0 0 V IP Camera TCP 9000 9000 192 168 1 101 Copyright 2009 TRENDnet All Rights Reserved 38 TV IP322P TRENDnet User s Guide 6 Open another web browser and enter your DDNS domain and camera s port 3 Find the Dynamic DNS configuration section number http yourDomainName PortNumber TRENDnet 150Mbps Wireless N Home Router TEW 651BR Main
46. ssword Enter the password to login into the FTP server Pre event and Post event actions are unavailable with SXGA resolution Directory Path Enter the destination folder for uploading the images For Wan IP Change Notify D nanos Passive Mode Select the Enable option to enable passive mode FTP Upload with Select upload to FTP with one snapshot image or a series e Email image in pre event post event time when event triggered SMTP Server Address Enter the mail server address For example myserver com If you are using a free mail service e g Google Gmail NOTE The Pre Event or Post Event only works when video resolution set up to 720P or lower It will not work with SXGA resolution Due to the network Yahoo Hotmail please enter the SM TP server address from the service speed environment the camera may not be able upload all number of provider the images that you set Sender Email Address Enter the email address of the user who will send the email For example John myserver com SMTP Port Assign the SMTP port in the text box The default SM PT port is 25 For the free mail service please enter the correct port number from the service provider SLor STARTLLS If the mail server requires an encrypted connection you should select the SSL option STARTTTLS is an extension to plain text Copyright 2012 TRENDnet All Rights Reserved 26 TRENDnet User s Guide TV IP322P communicat
47. tallations 235 x 110 x89 mm 9 3 x 4 3 x 3 5 in 1 5 kg 3 2 Ib Operating Temperature 20 C 60 C 4 F 140 F Condition Wind Velocity 130km hr Humidity M ax 90 non condensing Certifications CE FCC IP66 M anagement Internet Explorer 6 0 or above Interface To Run SecurView Windows 7 32 64 bit Vista 32 64 bit XP 32 64 bit Pro SecurView Pro Channel supports up to 32 cameras Record Playback M otion Detection Network Protocols TCP IP IPv4 IPv6 UDP ICMP DHCP NTP DNS DDNS SMTP FTP HTTP HTTPs Samba PPPoE UPnP Bonjour RTP RTSP and RTCP Management Remote Remote management supported Copyright 2012 TRENDnet All Rights Reserved TV IP322P Backup Restore Save retrieve configuration files Brightness saturation sharpness and mirror horizontal vertical Encoding type H 264 MPEG 4 M JPEG Compression 5 levels Resolution Frame Rate SXGA 1280 x 1024 up to 15fps VGA 640x480 up to 30fps QVGA 320x240 up to 30fps QQVGA 160x120 up to 30fps M ulti Stream H 264 SXGA VGA QVGA QQVGA M PEG4 VGA QVGA QQVGA MJPEG SXGA VGA QVGA QQVGA Recording Recording type continuous schedule or motion detection with software Event Management Event trigger motion GPIO schedule Store video file to SD card Send Instant message to Jabber client via Jabber server os 41 TRENDnet User s Guide TV IP322P Troubleshooting 1 inserted t
48. the Network Camera to run on your network Camera Name TV IP322P Camera Setting Admin Password Camera Name Enter a descriptive name for the camera For example camera 1 Confirm Password Location Enter a descriptive name for the location used by the camera For example meeting room 1 Admin Password Confirm Password Enter the administrator password twice to set and confirm the password to access the camera s Configuration Utility Copyright 2012 TRENDnet All Rights Reserved Copyright 2012 TRENDnet All Rights Reserved IP Setting Select the IP setting according to your network DHCP Static IP or PPPoE IP Setting DHCP Static IP IP Subnet Mask Default Gateway Primary DNS Secondary DNS PPPoE User Name Password Email Settings Enter the required information to be able to send email with image For example myserver com If you are using a free mail service e g Google Gmail Yahoo Hotmail please enter the SM TP server address and the corresponding information SSL and or STARTTLS from the service provider Email Setting Port Number This server requires an Sender Email Address john smith myserver com _ None SMTP Sender User Name john smith Sender Password Receiver 1 Email Address mary lynn mailserver com Receiver 2 Email Address tom bae mailserver com EN eel eco 14 TRENDnet User s Guide TV IP322P e Confirm
49. the Start IP address and End IP address options When you are KE 007 900 finished click Add to save the range setting You can repeat the action to assign multiple ranges for the camera mi For example when you enter 192 168 0 50 in Start IP Address and Smare Wizard 192 168 0 80 in End IP Address the user whose IP address located within TEESE 192 168 0 50 192 168 0 80 will not be allowed to access the camera 0 IPv6 Enter the IP Address that is not allowed to access the camera een Video Audio OverisyMask Event Server Motion Detect Event Config Tools RS 485 SD Card Device Info Copyright 2012 TRENDnet All Rights Reserved Copyright 2012 TRENDnet All Rights Reserved 21 TRENDnet User s Guide TV IP322P Video amp Audio gt gt Camera Video amp Audio Camera Image Setting Black Lewel Default E Vertical E Horizontal 50Hz 60Hz D Fast Normal Stow Color L Mono e Image Setting Black Level Adjust the brightness level from 0 5 Brightness Adjust the brightness level from 0 100 Saturation Adjust the colors level from 0 100 Sharpness Adjust the sharpness level from 0 100 TIP Click Default to restore the default settings of the three options above Mirror Select Vertical to mirror the image vertically or select Horizontal to mirror the image horizontally Light Frequency Select the proper frequency according to the
50. the camera might be damaged because of failure of upgrading firmware 32 TRENDnet User s Guide TV IP322P RS 485 RS 485 gt gt RS 485 Setting The RS 485 menu provides the control settings for external device through the I O port RS 485 RS 485 Setting TRENDNET Outdoor PoE Megapixel Day Night Internet Camera TV IP322P Location 2012 10 01 12 29 23 RS 485 RS 485 Setting Smart Wizard Popular Protocol Setting Basic Protocol Pelco D v Network Camera ID 1 Pelco D 0 254 Pelco P 1 32 n Custom Protocol Setti Video Audio Event Server a Motion Detect EN e e UOO e Event Config Tools RS 485 a a A RSE External Command 1 Patra SD Card a a En Cis a Test Select the Enable option and complete the required configuration to use the RS 485 External Command 5 x function of the device a Device Info e Popular Protocol Setting Select a Protocol Pelco D or Pelco P and then select Copyright 2012 TRENDnet All Rights Reserved qa Camera ID e Custom Protocol Setting Select this option to configure the commands protocol manually You can click Test to test each command that you have assigned In the Name and Command string boxes you can customize more buttons for your needs Please note that the setting values in the Command string boxes should be from the connected external device please refer
51. ttp camera ip address port number h264view htm Oe M PEG4 Mode e Administrator To prevent unauthorized access to the camera s Web http camera_ip address port number mpgview htm Configuration you are strongly recommend to change the default administrator password Type the administrator password twice to set and MJPEG Mode confirm the password http camera_ip address port number jpqview htm e General User NOTE This feature is enabled by default and for security reason it is User Name Enter the user s name you want to add to use the camera recommended ohave theteature enabled aralltimne Password Enter the password for the new user When you are finished click Add Modify to add the new user to the camera To modify the user s information select the one you want to modify from UserList and click Add Modify UserList Display the existing users of the camera To delete a user select the one you want to delete and click Delete e Guest User Name Enter the guest s name you want to add to use the camera Password Enter the password for the new guest UserList Display the existing guests of the camera To delete a user select the one you want to delete and click Delete Copyright 2012 TRENDnet All Rights Reserved 17 TRENDnet User s Guide TV IP322P Network Network gt gt Network The Network menu contains two sub menus that provide the networking settings for the camera such as the IP Setting
52. ult TRENDnet TV IP322P Change password You MUST change the default password of the camera Enter the default password admin Enter your new password must be between 8 and 32 characters Alphanumeric a z A Z 0 9 Admin ID Password TRENDnet User s Guide TV IP322P 9 Click here on the screen to access the camera now or click Next button for later accessing If you will access the camera later and the DHCP mode was selected you will need to run Camera Finder lPSetup utility as described in next section lt TRENDnet TV IP322P EE Initial setup is complete Local access from your computer To access the camera now click here lf DHCP Mode Selected In this mode the camera s IP Address may change To find the Camera s current IP address and to access it locally click on the Camera Finder button on the home menu Mobile App Visit www trendnet com App to find the App that works with your mobile device 10 Click Finish to exit the program or click Home return to the main screen amp TRENDnet TV IP322P Leo ea Congratulations The camera is now ready to be installed in its final location Copyright 2012 TRENDnet All Rights Reserved The camera comes with a conveniently utility PSetup which is included in the Installation CD ROM allowing you to search the camera on your network easily 1 Insert the Installation CD ROM into your computer s CD ROM drive to initiat
53. ult the IP setting on the Camera is set to DHCP If you have DHCP server the camera will automatic get the IP address from DHCP server If you do not have DHCP server on your network it will show the default IP as 192 168 10 30 Double click the IP address it will link to camera s web configuration page Access Camera Click this button to go to camera s web configuration page Change IP Click this button to bring up the following window It allows you to change the IP Address You can select either Static IP or click DHCP Then enter the Administrator ID amp Password By default the ID Password is admin When complete click Change Change IP Address Static IP IP Address Submask Default DHCP Administrator ID amp Password ID Password Change Exit Search Click this button to search the connected cameras in the same network Exit Click this button to exit the program Copyright 2012 TRENDnet All Rights Reserved Configuration Viewing Camera Basic Function Open the Web browser on your computer example showed in the User s Guide is based on the Internet Explorer Type the default IP address 192 168 10 30 or the IP address found by IPSetup in the Address bar and then press Enter New Tab Windows Internet Explore p gt http 192 168 10 30 File Edit View Favorites Tools Help When the login window appears enter the default User name admin
54. work gt gt IP Filter Network IP Filter IP Filter O i tel Fon The IP Filter setting allows the administrator of the camera to limit the users within a certain range of IP addresses to access the camera To disable this feature select the Disable option otherwise select the Accept option to assign the range of IP addresses that are allowed to access the camera or select the Deny option to assign the range of IP addresses that are blocked to access the camera e Disable Select this option to disable the IP Filter function of the camera e Accept Pv4 Assign a range of IP addresses that are allowed to access the camera by entering the Start IP address and End IP address options When you are finished click Add to save the range setting You can repeat the action to assign multiple ranges for the camera 20 TV IP322P TRENDnet User s Guide For example when you enter 192 168 0 50 in Start IP Address and Video amp Audio 192 168 0 80 in End IP Address the user whose IP address located within ee Gas ae The Video amp Audio menu contains four sub menus that provide the video and audio 192 168 0 50 192 168 0 80 will be allowed to access the camera l settings for the camera IPv6 Enter the IP Address that is allowed to access the camera e Deny Y TRENDNET Outdoor PoE Megapixel Day Night Internet Camera Pv4 Assign a range of IP addresses that are blocked to access the camera by entering
55. ys to e Spiral Cable Wrap conceal sensitive areas and digital zoom A wall ceiling mounting kit is included and a Network cable 1 5m 5ft sun visor shields the camera from direct sunlight e Desiccant e Power adapter 12V DC 1 5A e Camera mounting kit TRENDnet s M obile APP supports iPhone iPad iPod Touch and Android Search for SecurView M obile from iTunes or Google Play Note If any package contents are missing or damaged please contact the retail store For future updates please check www trendnet com App for details online retailer or reseller distributor that the item was purchased Monitoring multiple cameras may required a high performance CPU The camera provides two packs of desiccant one pack is pre installed inside the camera compartment before shipment the extra pack is provided for replacement while you open the back cover in the future The provided screws included a screws and washers for assembling the camera shield b expansion screws for mounting the camera to the wall Copyright 2012 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP322P Product Hardware Features Camera Connectors Camera Overview Shield Lens Camera Connectors Power Speaker Microphone GPIO Ethernet PoE Connector Out In Port Port e Power Connects the power adapter to supply power to the camera e Speaker Out Connects an external audio device such as the active speaker
56. zation RMA number will be issued An RMA number is required in order to initiate warranty service support for all TRENDnet products Products that are sent to TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid insured and packaged appropriately for safe shipment Customers shipping from outside of the USA and Canada are responsible for return shipping fees Customers shipping from outside of the USA are responsible for custom charges including but not limited to duty tax and other fees WARRANTIES EXCLUSIVE IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE THE CUSTOM ER S SOLE REM EDY SHALL BE AT TRENDNET S OPTION REPAIR OR REPLACE THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED EITHER IN FACT OR BY OPERATION OF LAW STATUTORY OR OTHERWISE INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A Copyright 2012 TRENDnet All Rights Reserved PARTICULAR PURPOSE TRENDNET NEITHER ASSUM ES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE INSTALLATION MAINTENANCE OR USE OF TRENDNET S PRODUCTS TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER S OR ANY THIRD PERSON S MISUSE NEGLECT IMPROPER INSTALLATION OR TESTING UNAUTHO
Download Pdf Manuals
Related Search