MS-PoE Injector User Manual
Contents
1. m m interlogix A UTC Fire amp Security Company J IFS MS PoE Injector User Manual Copyright 2011 UTC Fire amp Security All rights reserved This document may not be copied in whole or in part or otherwise reproduced without prior written consent from UTC Fire amp Security except where specifically permitted under US and international copyright law Disclaimer The information in this document is subject to change without notice UTC Fire amp Security assumes no responsibility for inaccuracies or omissions and specifically disclaims any liabilities losses or risks personal or otherwise incurred as a conseguence directly or indirectly of the use or application of any of the contents of this document For the latest documentation contact your local supplier or visit us online at www interlogix com This publication may contain examples of screen captures and reports used in daily operations Examples may include fictitious names of individuals and companies Any similarity to names and addresses of actual businesses or persons is entirely coincidental Trademarks and The Interlogix name and logo are trademarks of UTC Fire 8 patents Security The IFS name and logo are trademarks of UTC Fire amp Security Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products Intended use Use this product only for the purpose it was designed2. 10 MS POE Injector User Manual
3. PoE is an IEEE 802 3af Power over Ethernet Injector that provides 48VDC power over Ethernet cables PoE Package Contents Your MS PoE injector carton should contain the following items e The Power over Ethernet Injector x 1 e Users Manual x 1 If any item is missing or damaged please consult the dealer from whom you purchased you MS PoE injector module MS PoE Injector User Manual Chapter 1 Overview Introduction The IFS MS PoE IEEE 802 3af Power over Ethernet Injector inserts DC Voltage into Cat 5 cable allowing the cable between the Injector MS PoE and Splitter SP PoE to transfer data and power simultaneously The maximum distance between the Injector MS PoE and Splitter SP PoE is 100 meters With MS PoE installed it combines the Ethernet digital data with power over the twisted pair cables as an IEEE 802 3af Power over Ethernet Injector The IEEE 802 3af Power over Ethernet splitter can separate the digital data and power into two outputs With IEEE 802 3af Power over Ethernet devices installed the system administrator only has to use a single RJ 45 Ethernet cable to carry both power and data to each device Product Features e Complies with IEEE 802 3af Power over Ethernet IEEE 802 3 802 3u 10 100Base TX e Provide DC 48V power over RJ 45 Ethernet cable to device with Ethernet port e LED indicators power input indication e Distance up to 100 meters e Auto detect of PoE IEEE 802 3af equipment protects d
4. Power Camera Power 1 Switch 2 Power 100 Base TX UTP 3 Camera O 100 Base TX UTP with PoE 4 Data Once MS PoE detects the existence of an IEEE 802 3af device the LED indicator will stay steady ON to show it is providing power Note If the connected device does not fully comply with the IEEE 802 3af standard or in line power device the LED indicator of MS PoE will not be steady on Installing an MS PoE and a SP POE Injector and Splitter 1 Connect a standard network cable from Ethernet DC of MS PoE to Ethernet DC of SP POE The POE LED of MS PoE SP POE will light up continually 2 Connect the UTP cable in the package from Ethernet of SP POE to the RJ 45 port of the remote device 3 Connect the correct DC plug from DC OUT of SP POE to the remote device MS PoE Injector User Manual 9 Chapter 2 Hardware Installation 4 Power on the remote device The LED indicator on SP POE remains on Figure 3 Connection architecture over MS PoE SP POE 100 meters Switch D 1 1 Wireless Access Point Power 1 Switch 100 Base TX UTP 2 Power o 100 Base TX UTP with PoE 3 Data 43 Powerline DC 4 Wireless Access Point Note According to IEEE 802 3af standard the MS PoE will not inject power to the cable if it is not connect to IEEE 802 3af devices Please ensure the output voltage is correct before applying power to remote devices
5. for refer to the data sheet and user documentation for details For the latest product information contact your local supplier or visit us online at www interlogix com Manufacturer UTC Fire amp Security Americas Corporation Inc 2955 Red Hill Avenue Costa Mesa CA 92626 5923 USA EU authorized manufacturing representative UTC Fire amp Security B V Kelvinstraat 7 6003 DH Weert The Netherlands Certification N4131 MS PoE Injector User Manual i FCC compliance ACMA compliance Canada European Union directives Contact information This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 ofthe FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This eguipment generates uses and can radiate radio freguency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the eguipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and recei
6. IEEE 802 3 Ethernet IEEE 802 3u Fast Ethernet IEEE 802 3af Power over Ethernet Standard Compliance 4 MS POE Injector User Manual Chapter 1 Overview Ethernet cable TIA EIA 568 Category 5 5e cable Physical Specifications Dimensions W x D x H 2 87 x 2 17 x 0 94 73 x 55 x 24mm Weight 0 22 Ibs 50g Environmental Specification Operating Temperature 0 C to 50 C Relative Humidity 5 to 90 non condensing Storage Temperature 20 to 70 C Relative Humidity 5 to 90 non condensing Electrical Specification Input Voltage DC 48V 0 38A NOTE This product is intended to be supplied by a UL Listed Direct Plug In Power Unit marked Class 2 or LPS and output rated 48 VDC MS PoE Injector User Manual 5 Chapter 1 Overview 6 MS POE Injector User Manual Chapter 2 Hardware Installation This product provides two different running speeds 10Mbps 100Mbps inthe same device and automatically distinguishes the speed of the incoming connection This section describes the hardware installation of MS PoE Before connecting any network device to the MS POE read this section carefully Before Installation Before your installation it is recommended that you check your network environment If there are any IEEE 802 3af devices that you need to power the MS PoE can provide you a way to supply power for this Ethernet device conveniently and easily The MS PoE works with an AC DC ada
7. evices from being damaged by an incorrect installation e Work with EIA568 category 5 4 pair cables for 10Base T or 100Base TX e EMI standards comply with FCC CE class B e Saves time and reduces installation costs e Easy plug and play installation 2 MS PoE Injector User Manual Chapter 1 Overview Product Overview Figure 1 shows the right and left side views of the MS PoE injector Figure 1 MS PoE right and left side panels LED Indicators LED Color Function Power Yellow Lights to indicate that the MS PoE has power PoE ready in use Green Lights to indicate the port is providing 48VDC in line power MS PoE Injector User Manual 3 Chapter 1 Overview Product Specifications Interface Ethernet Copper Port 1 X 10 100Base TX for data in RJ 45 connector Ethernet DC Copper Port 1 x 10 100Base TX with IEEE 802 3af PoE PSE for data DC out RJ 45 connector Power over Ethernet IEEE 802 3af Power over PoE Standard Ethernet PSE PoE Power Supply Type Mid Span Type B Power PIN Assignment 4 5 7 8 PoE 48V DC Max 15 4 watts PoE Power Output 350mA Number of device can be powered Hardware Specification Ethernet Data rate 10 100Mbps vary on Ethernet device attached Throughput Packet per second 148810 Q64Bytes Input Power 48V DC 0 38A max 1 x Power LED indicator 1 x PoE ready in use Installation Standalone or wall mount Standard Conformance
8. pter not supplied with DC 48V input and injects this DC power into the pin of the twisted pair cable pair 4 5 and pair 7 8 for Fast Ethernet MS POE Injector User Manual 7 Chapter 2 Hardware Installation If it is very difficult to find a power socket for an AC DC Adapter of your non IEEE 802 3af networked device the MS PoE and SP POE can provide you a way to supply DC power for this Ethernet device conveniently and easily Note The MS PoE and SP POE can be installed in pair s However the use of third party device is allowed if the device complies with IEEE 802 3af standard Installing the MS PoE 1 Connect a standard network cable from Switch workstation to Ethernet port of MS PoE Connect the long cable that will be used to connect to the remote device to the port Ethernet DC Connect an AC adapter to DC 48V of MS PoE The power LED will be steady on Note This product is intended to be supplied by a UL Listed Direct Plug In Power Unit marked Class 2 or LPS and output rated 48 VDC Connect to IEEE 802 3af devices Due to the the IEEE 802 3af standard the MS PoE can directly connect with any IEEE 802 3af end nodes such as a wireless access point VoIP phones and Internet cameras which support IEEE 802 3af In line Power over Ethernet port MS PoE Injector User Manual Chapter 2 Hardware Installation Figure 2 Connection to the IEEE 802 3af device 100 meters O Switch o Pot 1 4
9. ver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Notice This is a Class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures This Class A digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe A est conforme la norme NMB 003du Canada 2004 108 EC EMC Directive Hereby UTC Fire amp Security declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2004 108 EC 2002 96 EC WEEE directive Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union For proper recycling return this product to your local supplier upon the purchase of equivalent new equipment or dispose of it at designated collection points For more information see www recyclethis info For contact information see our Web site www interlogix com MS POE Injector User Manual Content Chapter 1 Overview 1 Introduction 2 Product Overview 3 Product Specifications 4 Physical Specifications 5 Chapter 2 Hardware Installation 7 Before Installation 7 Installing the MS PoE 8 MS PoE Injector User Manual Chapter 1 Overview VER 802 Sat po MS Poe R INIECTOWER HERVE The IFS MS
Download Pdf Manuals
Related Search