User manual Timer Unit TI 501
Contents
1. Timer Unit TI 501 User Manual _ Kockum Sonics NY User manual Timer Unit TI 501 A f p REN RX K N AR ad NN ER W Ref no 245 80 122 Issue KSA685EN 0720 Sidan 1 av 7 Dear Customer Thank you for the confidence you have displayed in purchasing a warning devices consisting of a TYFON Siren and TI Timer Unit Installation and commissioning should be done by people with appropriate training and professional skill Please read the installation manual carefully beforehand It is also important to read the manual since incorrect operation can damage the installation Please contact us if you have any questions Yours Faithfully Kockum Sonics Box 135 SE 212 10 Malmo Sweden Phone 0046 40 671 8800 Fax 0046 40 21 65 13 www kockumsonics com info kockumsonics com Sidan 2 av 7 Introduction The Timer Unit TI 501 is programmed for different alarms sequences which are transmitted to the magnetic valve which controls the air flow to the sound emitter TYFON The alarm characters are permanently stored in the unit Air supply Power supply Sidan 3 av 7 Precautions This unit is designed for 24 V DC operation only Caution Before making any connections disconnect the power supply Connections Power supply has to be connected By remote operation a closing potential free contact has to be connected between and 11 Alerta 2 Fin de2. alerta I3 Ensayo 4 Parada for release of an alarm The unit has one potential free open output contact 01 which make according to the selected alarm signal Alerta External relays for alarm release Fin de alerta to be closed min 0 5 s Ensayo Parada L M 1 12 13 14 15 16 17 18 O00000 00000 ee o OO e o SEE ODD 1992 Gore GL GS Power supply A Power supply to solenoid valve i to Timer Unit TI 501 Sidan 4 av 7 Specification The unit is programmed with the following alarm characters Alerta 120 s Fin de alerta 30 s Sidan 5 av 7 Property Unit Power supply 24 V DC Power consumption 10 W Inputs 8 Opto Outputs 4 Relays Continuous max current 4 A Max voltage 240 V Rated connection 2 5 mm Protection class IP 54 Operating temp range 0 55 NG Storage temp range 40 70 AG Dimensions W x H x D 200 x 200 x 120 mm Weight 3 0 kg Enclosure colour light grey RAL 7035 Operation By pressing one of the alarm buttons on the front panel the different alarms can be released The activation is delayed with 0 5 seconds to avoid false chose The released alarm is indicated by a LED in the respective button By the stop push button the released alarm can be interrupted Push button 1 Alerta Push button 2 Fin de alerta Push button 3 Ensayo Push button 4 Parada Installation The cabinet has to be fix at a wall with four screws Sidan 6 av 7 Troubleshoo
3. ting guide The following checklist will assist in the correction of most problems which you may encounter with your unit Before going through the checklist below refer to the connection and operating procedures Problem No illumination in the push button No Alarm Sequence from the unit No sound from the sound emitter Sound not interrupted Disposal Cause solution The fuse is blown Replace the fuse with a new one No power supply Check the voltage with a multimeter The magnetic valve is not activated Check the voltage at the valve with a multimeter Dirt in the magnetic valve Clean the valve inside The unit shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural resources Sidan 7 av 7
Download Pdf Manuals
Related Search