Home
Pro-Ject Set“ Mediaplayer”
Contents
1. 16 418 BY PRO JECT AUDIO SYSTEMS INSTRUCTIONS FOR USE Pro Ject Set Mediaplayer Dear music lover thank you for purchasing a Pro Ject Mediaplayer Set In order to achieve maximum performance and reliability you should study these instructions for use carefully V Warning of a hazard for the user the units or possible misuse neg Important notice Safety instructions AC outlet voltages vary from country to country Before connecting to the mains make sure that the voltage in your area meets the voltage requirements printed on the power supply The power cord power supply is used to disconnect the unit from the mains Make sure that the power cord power supply is easily accessible at all times Never handle the device the power cord power supply while your hands are wet or damp Avoid letting liquids enter the device or the power supply Never place any item containing liquid such as a flower vase on or near the device Never spill any liquid on the device or the power supply Never place any naked flame sources such as lighted candles on or near the device The product shall not be used in damp or wet locations next to a bathtub sink swimming pool or any other similar conditions What s in the box Stereo Box S including remote control handset power supply and power cord Media Box S including remote control handset and power supply 2 x Speaker Box 5 including wall mount brackets and instructio
2. alogue record device ore a Pro Ject Head Box headphone amplitier 5 Record Out provides a fixed output level Connectors Media Box 5 Right RoHS Power 9V S P DIF Co axial EXT ProJect Audio Systems Vienna Austria 3 The Analog and the digital output cannot be used at the same time To be able to use the analog output the digital output has to be disengaged in the menue and vice versa Make all connections whilst the Media Box S is disconnected from the power supply Connection to a external A D converter Connect the Out S P DIF socket to a coaxial digital input on the D A converter or AV processor Doing so allows you to use the signal in its digital for further digital processing Mains power connection Stereo Box 5 Connect the low voltage plug from the power supply to the Power 20V socket before connecting the power supply to the mains Media Box S Connect the low voltage plug from the power supply to the Power 9V socket before connecting the power supply to the mains V Never use any other power supply than the one supplied with the particular unit Audio Trade GmbH Pro Ject Set Mediaplayer Revision 2013 1 15 3 Remote control Stereo Box 5 turns the unit on or back into standby oe co and adjust the sound volume omc and select the inputs ON OFF Front panel controls Stereo Box S 1 2 4 To switch on from standby or
3. lays the main menu and starts playback of a selected track in a playlist Play Pause Pressing starts and pauses playback Restarts playback from the same position after stopping lt displays the playlist starts playback of a selected track in a playlist Starts playback of the next track Remote control Media Box S turns the unit on or back into standby O rer Input selection SD rere 6 selects between card reader and USB the menu playlist main menu To switch on from standby or to standby a MO move the curser up and down to highlight the requested 65 OO 5 5 pti displays the playlist ENTER displays the main menu Selects the highlighted option or modes in menus and submenus Audio Trade GmbH gt Pro Ject Set Mediaplayer Revision 2013 1 15 Play Pause n starts and pauses playback Restarts playback from the same position after stopping While playback and pause the display shows the repeat play and the shuffle mode the data format MP3 and the selected input card reader USB Repeat and shuffle play ww as a default setting the unit is in repeat all mode RP ALL Repeatedly pressing selects the different repeat and shuffle play modes repeat folder RP Fol repeat track RP One random play all tracks Rand A play all tracks PL ALL play all tracks in folder PL Fol and play current
4. lt 1W in standby Replacement battery remote control x CR2032 3V Dimensions W x H x D D with sockets 103 x 36 x 104 122 mm Weight 720g without power supply Technical specifications Pro Ject Media Box S Audio formats MP3 WMA AAC no DRM support USB input High Speed 2 0 24 96 Typ A socket Power supply for 2 5 hard drives 5V DC max 500mA Hard drives FAT16 and FAT32 no exFAT or NTFS support Card reader SD card secure digital max 32GB Line level output 1 pair RCA phono sockets Output voltage max 1Vrms Noise floor 100dB 1V Digital output co axial S PDIF D A converter Texas Instruments TLV320AIC23B 24Bit 96kHz upsampler Outboard power supply 9V 2A DC suitable for your country s mains supply Power consumption 1 8A DC max with hard drive connected lt 1W in standby Replacement battery remote control x CR2032 3V or 1 x CR2025 3V Dimensions W x H x D D with sockets 103 x 36 x 104 109 mm Weight 550g without power supply Technical specifications Pro Ject Speaker Box 5 Recommended amplitier power 10 150 watts Impedance Bohms Sensitivity 1W 1 m 86dB Dimensions W x H x weight 160 x 255 x 210mm 4 2kg Audio Trade GmbH Pro Ject Set Mediaplayer Revision 2013 1 15 Service Should you encounter a problem which you are not able to alleviate or identify please contact your dealer for further advice Only when the problem cannot be resolved there should the unit be se
5. n for use Design Box 2 Acryl Speaker cable length 2 x 3 meter 8 x banana plugs 4mm Interconnect cable length 25cm Connectors Stereo Box 5 Record Out CE RoHS E Power Right Left Right z OV 50 R L Pro Ject Audio Systems Vienna Austria V Make all connections whilst the amplifier is disconnected from the power supply Connecting amplifier and mediaplayer Connect using the supplied interconnect cable the sockets IN1 on the amplitier to the sockets OUT on the Media Box S Inputs Line level sources such as CD player radio or TV can be connected to the input sockets marked IN1 or IN2 y Take care to connect the left and right channels correctly The right channel is usually marked red the left channel black or white 2 Audio Trade GmbH Pro Ject Set Mediaplayer Revision 2013 1 15 Connecting amplifier and speakers The output terminals accept loudspeaker cables terminated with 4mm Banana plugs spades connectors or naked wire Connect the cable terminals on the amplifier to the terminals on the speakers The red speaker terminals carry the positive signal the black speaker terminals the negative signal Make sure the polarity of the connection is correct at each end of the cables Only connect one loudspeaker with an impedance not less than 4 ohms per channel Record output connecting a headphone amplifier Stereo Box S Record Out connects an an
6. nt to the responsible distributor in your country Warranty The manufacturer accepts no responsibility for damage caused by not adhering to these instructions nes for use and or by transportation without the original packaging Modification or change to any part of the product by unauthorized persons release the manufacturer from any liability over and above the lawful rights of the customer Copyright PRO JECT is a Registered Trademark of H Lichtenegger The information was correct at the time of going to press The manufacturer reserves the right to make This guide was produced by Audio Trade GmbH changes to the technical specification without prior Copyright 2012 All rights reserved notice as deemed necessary to uphold the ongoing process of technical development 8 8 Audio Trade GmbH Pro Ject Set Mediaplayer Revision 2013 1 15
7. to standby Stereo Box 5 The push button press and hold to switch into standby mode on the left hand side of the front panel turns the unit on or back into standby The blue LED above the stand by push button shows that the unit is switched on Input selector Stereo Box 5 After the unit is powered on pressing the push button on the right selects the In 1 and In 2 inputs in turn The optional input expander Pro Ject Switch Box S provides three more inputs For further details please see the user guide of the Pro Ject Switch Box S Volume Stereo Box 5 Adjust the volume to the desired level using the large knob on the front panel 4 Audio Trade GmbH Pro Ject Set Mediaplayer Revision 2013 1 15 Front panel controls Media Box 5 lt gt o Media Box S To switch on from standby or to standby Media Box S The push button on the left hand side will toggle the player between its fully operational status and standby The blue LED above the stand by push button shows that the unit is switched on The display shows STANDBY when the unit is in standby If there is no SD card inserted or no USB device connected the unit will returns to standby automatically Atter switching to standby the display shows the current software version Navigating the menu and playlists main menu lt and moves the curser up and down to highlight the requested option in menus and playlists disp
8. track PL One To select a folders or an entry re Press or to step between folders aN Press or to step between next previous 5 entries of a folder Stepping between tracks reverse and forward scanning skips to the next track restarts the current track in playback mode Press and hold the button for reverse scanning or the button to start forward scanning 6 Audio Trade GmbH Pro Ject Set Mediaplayer Revision 2013 1 15 Replacing batteries Proceed as follows e Unlock and slide open the battery case cover e Replace the battery Make sure the battery is the right way round e Close the battery case cover Battery type 1 x CR2032 3V or 1 x CR2025 3V Do not dispose the batteries as ordinary domestic refuse Please dispose your exhausted batteries at the appropriate collection sites usually located at supermarkets and drugstores Technical specifications Pro Ject Stereo Box S Power output 2 x 25W 30W at 8 ohms 4 ohms both channels driven Frequency response 20Hz 20kHz 0 2dB Channel separation gt 40dB at 20kHz Noise floor gt 100dB A weighted THD lt 0 05 at 10W Gain 22dB Line level inputs 2 pairs RCA phono sockets Input impedance 20kohms Record Out 3 pole 3 5mm co axial jack Speaker connectors 4mm banana plugs spades connectors or naked wire Outboard power supply 20V 3A DC peak 7A DC suitable for your country s mains supply Power consumption 3A DC
Download Pdf Manuals
Related Search
Related Contents
Eglo 92316 Q @ @J < 1% SD3110 Manual - sd ελληνικα - Service EZ-200 Owner`s Manual MRS-400 User manual - Kronos Security Services i3n data base on invasive alien species web interface user manual Piano di sicurezza e coordinamento Copyright © All rights reserved.
Failed to retrieve file