USER MANUAL – EN IN 9126 Motorized - Global
Contents
1. Key Under ready condition it is used for setting some data Under running condition it is used for setting speed speed difference is 0 1 km h for each time When we press it for above 0 5 seconds it will progressive increase or reduce automatically INCLINEAV Key Under ready condition it is used for setting some data Under running condition it is used for setting incline incline difference is 190 for each press When we press it for above 0 5 seconds it will progressive increase or reduce automatically 11 SPEED Direct Key Use these keys you could set speed for 5km h 10km h 15km h directly INCLINE Direct Key Use these keys you could set incline for 590 1090 1590 directly DISPLAYED WINDOW 2 DISTANCE tml COLS 0 tome F G H Display running time Display running speed Display calorie Display heart rate Display runway Display specific incline 12 DETAILED INSTRUCTIONS Quick start for manual mode Turn on power switch put safe key in the right position Press START key there will be 3 seconds countdown displayed on the window After countdown the machine will run at the speed of 1 0km h According to your needs you could use SPEED SPEED to change speed use INCLINEA INCLINE V to change incline When you put your hands on the handlebar s heart pulse for 5 8 seconds it will displ2. Method Firstly set Start and End location Then get the first turning point by one click You can totally set 8 turning points System will plan the route again after your setting 22 7 APP Supported Devices 7 Supported mobile devices e Android 1280 752 Android 4 0 tablet only for 10 inch above 1 OS 5 0 or above iPad4 iPad3 1 2 iPad iPad Mini 7 2 Work with machine type SD8710 console and treadmill TERMS AND CONDITIONS OF WARRANTY WARRANTY CLAIMS General Conditions of Warranty and Definition of Terms All Warranty Conditions stated hereunder determine Warranty Coverage and Warranty Claim Procedure Conditions of Warranty and Warranty Claims are governed by Act No 40 1964 Coll Civil Code Act No 513 1991 Coll Commercial Code and Act No 634 1992 Coll Consumer Protection Act as amended also in cases that are not specified by these Warranty rules The seller is SEVEN SPORT s r o with its registered office in Borivojova Street 35 878 Prague 13000 Company Registration Number 26847264 registered in the Trade Register at Regional Court in Prague Section C Insert No 116888 According to valid legal regulations it depends whether the Buyer is the End Customer or not The Buyer who is the End Customer or simply the End Customer is the legal entity that does not conclude and execute the Contract in order to run or promote his own trade or business activities The Buyer who is not the End
3. natural disaster Adjustments made by unqualified person Improper maintenance improper placement damages caused by low or high temperature water inappropriate pressure shocks intentional changes in design or construction etc Warranty Claim Procedure 23 The Buyer is obliged to check Goods delivered by Seller immediately after taking responsibility for the Goods and its damages i e immediately after its delivery The Buyer must check the Goods so that he discovers all the defects that can be discovered by such check When making a Warranty Claim the Buyer is obliged on request of the Seller to prove the purchase and validity of the claim by the Invoice or Bill of Delivery that includes the product s serial number or eventually by the documents without the serial number If the Buyer does not prove the validity of the Warranty Claim by these documents the Seller has the right to reject the Warranty Claim If the Buyer gives notice of a defect that is not covered by the Warranty e g in the case that the Warranty Conditions were not fulfilled or in the case of reporting the defect by mistake etc the Seller is eligible to require a compensation for all the costs arising from the repair The cost shall be calculated according to the valid price list of services and transport costs If the Seller finds out by testing that the product is not damaged the Warranty Claim is not accepted The Seller reserves the right t
4. 2 15 4pcs S Washer 8pcs Lubricant Safety key G D connector 1pcs Umbrella type allen screw M4 20 4pcs EXPLODED VIEW These are all the components used in installation All components are listed in the following form LIST OF COMPONENTS Right pillar accessory Incline frame Quantity 1 1 1 1 1 1 1 1 1 No Component Quantity Long bumper Go Go Go Go Go Go LA N n2 ocating pad for decorative bead Rubber wheel pper cover of meter eter panel ight decorative cover for upright Se eft decorative cover for upright ower cover of meter N urface paster 10 Back roller 1 37 Safety key 1 m peemeeem ELL TREADMILL STRUCTURE Meter Push key on the handlebar Handlebar Meter tube Running belt Decorating cover at base Base frame Back cover ASSEMBLY INSTRUCTIONS Step 1 Set meter tube on the base frame Communication Screw M8 60 Washer 8x 16xT1 5 NN Screw 8 20 a Make the communication line through the right meter tube b Set meter tube on the base frame Use 2 pcs of Screw M8 20 with 2 pcs of washer and 2pcs of Screw 8 60 with 2 pcs of washer 2 pcs of nut to solid the meter tube Don t fasten screw at first Step 2 Put meter on the meter tube Screw M8 20 Washer 8x 16xT1 5 Screw ST4 2 15 a Putdecorating cover for meter on meter tube b Make sur
5. set target HR System max BPM is 230 When Time counts down to from set value console will stop and treadmill stop as well then comes to workout page 20 Warm up Reminder Warm up When exercise start there is 2 minutes Warm up time If no hand pulse input system will alarm and remind user to grip handlebar Without pulse input for 30 seconds console will stop 4 Personal Setting y Profile UC su Machine Type amp User may set personal profile by entering Setting and select Metric or Imperial After setting personal data it can be saved for future reference 5 Workout Information History record From the Information center user can review history workout record 6 GYM Center i Route Purchased den 5004 _ _ ml 18 gt Route Plan my own route 21 Select G Purchased 1 Plan my own route Items gt Route i my to plan training route Set Start location by first long press and End location by second long press After planning the route press to start training Start location End location Training page During exercise user may click o 28 to choose monitor routes Map view Satellite view Street view mode incline 1 Time 00 04 Distance 0 00 Heart Rate 0 LD OE Ue _ Y SS 1 Str eet view ew 5
6. supporting tube and pull running board with your hands The running board will fall to the ground slowly INSTRUCTION FOR CONSOLE Read the owner manual carefully before using the product Remove the safety key when the unit is not in use To avoid injury stand on the side rails before starting the unit Keep children away from the treadmill during operation us INCLINE SPEED TECH INFO Program 10 PANEL KEYS INCLINE Lo INCLINE INCLINE Moc Line emm erect _ 1211 E T2141 T START Key Press Start key there will be 3 seconds countdown displayed on the window After countdown the machine will run at the speed of 1 0km h STOP Key Under running condition press Stop key it will slow down then stop Reset Press Stop key twice continuously the machine will be reseted and start for new exercise record when you press Start PROG Key Under ready condition press PROG you could select program P1 P99 and FAT P1 P99 is built in program FAT is body fat test When you finished selecting you have to press Start to start it MODE Key Under ready condition Press MODE you could select 30 00 1 0 or 50 30 00 18 time countdown 1 0 1s distance countdown 50 is calorie countdown When you have selected you have to press Start to start it SPEED
7. the window You could find whether your weight and height matches This data only for reference can t be used for medical data 1900 25 Normal weight e 29 Overweight Power save mode Our machine has power save function When you turn on power switch for 10 minutes and don t press any key the machine will come into power save mode and there 15 no light on the screen You could press any key into ready condition MAINTENANCE RUNNING BELT ADJUSTMENTS Identification ways for the degree of tightness of running belt and poly V belt When the running belt skips please follow the steps as follows to make sure which belt needs to be adjusted running belt or poly V belt a Unplug all power supply screw and remove the base cover b Turn the speed to be around 3km h step on the running belt by pressure and try your best to make the running belt stop If running belt stops together with the front roll but the motor still runs under this condition it means the poly V belt needs to be adjusted c Turn the speed to be around 3km h step on the running belt by pressure and try your best to make the running belt stop If running belt stops but front roll still runs under this condition it means the running belt needs to be adjusted The adjustment steps for poly V belt a Unplug all power supply and take off the base cover b Loosen the four screws for the motor adjust the V belt tension bolts in clockwise di
8. Customer is a Businessman that buys Goods or uses services for the purpose of using the Goods or services for his own business activities The Buyer conforms to the General Purchase Agreement and business conditions to the extent specified in the Commercial Code These Conditions of Warranty and Warranty Claims are an integral part of every Purchase Agreement made between the Seller and the Buyer All Warranty Conditions are valid and binding unless otherwise specified in the Purchase Agreement in the Amendment to this Contract or in another written agreement Warranty Conditions Warranty Period The Seller provides the Buyer a 24 months Warranty for Goods Quality unless otherwise specified in the Certificate of Warranty Invoice Bill of Delivery or other documents related to the Goods The legal warranty period provided to the Consumer is not affected By the Warranty for Goods Quality the Seller guarantees that the delivered Goods shall be for a certain period of time suitable for regular or contracted use and that the Goods shall maintain its regular or contracted features The Warranty does not cover defects resulting from User s fault i e product damage caused by unqualified repair work improper assembly insufficient insertion of seat post into frame insufficient tightening of pedals and cranks Improper maintenance Mechanical damages Regular use e g wearing out of rubber and plastic parts joints etc Unavoidable event
9. E insportline USER MANUAL EN IN 9126 Motorized Treadmill inSPORTIline T60i CONTENTS SAFETY TNSTRUCTIONS E 3 PAC EIN G DETAL aea A E AO EEE 4 EXPLODED VIEW eege Eege 5 IERT e EH KE 5 EH RE ESCH RR BEE 6 PN NTS Te Ne EIN SUC EIN errors oct ete a prc aan 7 USAGE EE 8 POW FER SWITCH BE 8 SN oy ISEY uu tUe EE mE E mM Dm es 8 FOLDING DCH RTE e LEE 9 INSERUCTION TOR CONS OLB ve essa es A A 10 DPETAILED TNSTRUCTHONS cte a E E 13 MATNTENANC E 14 RUNNING BELT EE n td rb atl ne em 14 ECH E 16 CAUTIONS DEPOSUELDNGJI E 16 GUIDES PORNEAEEBENC TION WE 16 INSTRUC TION MANUAL TE BB el 18 TERMS AND CONDITIONS OF WARRANTY WARRANTY 23 Special tips Before installation and operation please read this operation manual carefully and save this manual for future reference SAFETY INSTRUCTIONS We have considered more for safety when we design and produce this item However in case of any unhappiness please pay attention to these tips We don t assume responsibility if any accident cased by follow tips e According to your health condition please exercise properly Overload or improper exercise will damage your health e While running you should dress properly Don t dress too loosely in case your clothes ar
10. ay heart rate on the screen Manual mode Under ready condition press Start key the machine will run at the speed of 1 0km h and incline 0 The other window will forward count from 0 Press INCLINE direct key SPEED direct key INCLINE A INCLINE V SPEED SPEED you could change speed and incline Under ready condition press MODE to come into time countdown mode Window Time displays 30 00 and shining you could press INCLINEA INCLINEV SPEED SPEED to set exercise time from 5 00 99 00 When on distance countdown mode press MODE to enter Window DIST displays 1 0 and shining you could press INCLINEA INCLINE V SPEED SPEED to set exercise distance from 0 5 99 9 When on calorie countdown mode press MODE to enter Window CAL displays 50 and shining you could press INCLINE A INCLINE V SPEED SPEED to set calorie from 10 999 After finish setting time distance or calorie mode you could press Start to start the machine There will be 3 seconds countdown displayed on the window After countdown the machine will run at the speed of 1 0km h You could press INCLINEA INCLINE V SPEED SPEED to adjust speed and incline Press Stop the machine will stop slowly Built in Program There are 99 built in programs P1 P99 Under ready condition press PROG Key continuously Win
11. dow PROGRAM will display P1 P99 FAT in turn 1 99 are built in programs After selecting specific program press MODE Window Time displays 30 00 and shining you could press INCLINEA INCLINE V SPEED SPEED to set exercise time from 5 00 99 00 After setting press Start to start the machine Built in programs have 16 parts the time for each part setting time 16 When machines come into next part there will be a voice Bi Bi Bi to remind you and speed and incline will be changed according to the built in programs No matter whether you have pressed INCLINE A INCLINE V SPEED SPEED to change speed and incline in front parts After finishing one program there will be voice Bi Bi Bi the machine stop slowly and End will be displayed on the window 5 seconds later the machine will come into ready condition Data range Parameter Setting range Displayed range Time minute second 5 00 99 00 0 00 99 59 13 Body fat test Under ready condition press PROG key continuously to come into FAT Press MODE key you could find F 1 F 2 F 3 F 4 F 5 F 1 SEG F 2 AGE F 3 HEIGHT F 4 WEIGHT F 5 FAT displayed on the window Press INCLINEA INCLINEV SPEED SPEED to set After setting press MODE to come into FAT At this time put your hand on the heart pulse for 5 8 seconds there will be body fat date displayed on
12. e entangled by the machine And please wear sport shoes Don t let your children or pet play near it to avoid unnecessary injury e This machine is not suitable for children For patients or the disabled to use they have to follow the guides by their guardians or doctors Don tuse this machine when in outdoor high humidity condition or sun e Please pull the plug off from socket and keep safe key when the treadmill is unused e This machine is for home use not suitable for professional exercise or testing and also not suitable for medical purpose e The heart rate on this machine is not suitable for medical e If any damage for power wire please ask manufacturer or professional service to replace it in case of any danger e Please check all the parts before using Make sure that all the nuts or screws are fastened e Place your treadmill on the clean flat and solid floor Make sure that there is not anything pointy water or hot near to the machine e Please stop exercising immediately and consult your doctor if you re feel giddy surfeit thorax ache or other symptoms e Make sure that hands are not near to running parts Don t put your hands or foots under the running belt When running this machine it is only for one person to use it e Please use the spare parts from us it is not acceptable if you use spare parts from others This machine is HC level max weight shall be less than 120 kg e Please consult your doct
13. e factory lubricated Lubrication is not necessary directly after purchase Lubrication needs constant maintenance termly after purchase The friction between the running board and running belt has a great effect on the treadmills life So please lubricate your machine termly every one month The steps are as follows Step 1 Please unplug power supply for the treadmill and loosen the belt belt tension screws located at the end of the treadmill Step 2 After loosening the screws lift up the running belt and clean in between the running board Squeeze the small white bottle of SILICONE oil which was supplied with your purchase and wipe it evenly across the board Step 3 After lubricating the board screw the belt tension back to its correct tension Tighten evenly on both sides When it is almost tensioned run the treadmill at Ikm without any load Adjust both tension screws to make the belt in the centre of the back roller Run the treadmill at 5km for 3mins Step 4 Stop the treadmill and start to walk on it at 5km h Lastly fine tension both screws until it s running smoothly with your weight on 15 CLEANING a Please power off and pull the plug out before cleaning b Wipe out the dust stuck on the surface and running board frequently c Please clean the surface of frame and running belt with a soft cloth dipped with suds don t use things like eradicator and naphtha After cleaning please dry it for use d Pl
14. e that communication lines are connected correctly in case they are connected in reverse c Put meter on the meter tube Use 4 pcs of Screw M8 20 with 4 pcs of washer 2 pcs of nut to solid the meter Don t fasten screw at first d After the machine is power on push Start If everything goes well then fasten screws mentioned in front steps Use 4 pcs of Screw ST4 2 15 to solid decorating cover for meter Step 3 Install decorating cover at base Screw M4 20 Use 4 pcs of Screw MA 20 to solid left and right decorating cover at base Step4 Disassemble connecting screw for base frame Disassemble this screw USAGE POWER SWITCH Insert the power plug into the socket and switch on the machine The switch light will be on and you will hear a voice You will find the meter light will also be on Les ps nl E ry SAFETY KEY The machine can work only when you put safety key at the appointed position Make sure the other end of the safety key has been nipped to your clothes In this way you can pull the safe key for the machine s sudden stop under the dangerous condition Then you will not be injured If you need to reuse the machine you could put safety key back FOLDING amp UNFOLDING Folding Folding will help to save space Before folding please switch off and pull off the plug Use your hand to lift the running board until it has been locked Unfolding Step on the
15. ease take the protecting cover off every two month use vacuum dust collector to suck the dust remaining inside of the protecting cover The dust will make the components of circuitry board short circuit CAUTIONS DEPOSITING Cautions Please make sure that the plug has been pulled out before cleaning or maintenance Depositing The treadmill should be deposited indoor in case of being damp Water can t be spattered and nothing can be laid and inserted on the treadmill Please keep the air a little humid in winter And please void the big static electricity it may disturb the operation of meters or even damage them GUIDES FOR MALFUNCTION Analyzing and eliminating malfunction Treadmill can t be The safe key isn t in the right Put the safe key in the right started position position The electrical switch is placed to 0 Turn the electrical switch to 1 Meter can t display The meter and upper communication Disassembly meter and check the line are not connected well upper communication line make sure that meter and communication line are connected well The upper communication is broken Replace it Heart rate can t be The pole of heart rate sensor is not Wet the pole with water or liquor displayed wet enough for hard contact lenses Disturbed by electromagnetism Stay away from electromagnetism Incline doesn t work The motor wire is not well connected Open the motor cover and reconnect it Running belt r
16. ect of upper communication line with console board and lower communication line with PCB the connect of upper communication line and lower communication line If they are connected well change the communication lines Check whether it is overloading Check whether the drive motor can run normally If not replace motor Check PCB if it 1s broken replace PCB Check power voltage use normal power voltage Check those in turn whether the motor wires are connected change motor change PCB If it is not overload then add oil for running board change the running belt or running board change the PCB in turn to check Stop the machine and make it to be cold If it happens when in normal temperature then replace PCB Check the voltage whether it is normal Check the VR wire AC wire connecting wire of incline motor incline motor and PCB whether they are connected well or broken After checking restart the PCB If you still can t solve problems after taking solutions above we hope that you can contact our dealer or company as soon as possible INSTRUCTION MANUAL FOR IRUNNING 1 Download iRunning to tablet APP name iRunning on Google play iTune Store 2 Connect the console to tablet 2 1 105 system Enable Bluetooth function and search device Note Please find device no from console Then perform Bluetooth pairing device preset pairing pas
17. ine by p pressing console buttons After exercise user can share workout information via Facebook or Twitter or else go back to Homepage 3 3 Manual 19 Setting page uit Distance Calor tes E lt i User can set target Time Distance Calories by manual After setting press to start During exercise user can adjust Speed Incline by pressing console buttons After exercise user can share workout information with Facebook or Twitter or else go back to Homepage 3 4 User Program Setting page Program cluster Time setting Peter s Doss User can design his her own training graph by adjusting Speed Incline value and then name the program for future reference From the program cluster user may add or delete program When entering program set time and press start During exercise user can an adjust SpeedWMncline by pressing console buttons After exercise user can share workout information with Facebook or Twitter else go back to Homepage 3 5 HRC u v Your Max HR 200 BPM Your Max HR 270 Your Max Hit 20J DM 7 7 d 7 E V v In this mode user can choose 5590 6596 7590 custom for different heart rate training For example user chooses 55 system will self calculate Heart Rate 220 Age 55 103 4 BPM After selection double click the icon to enter to enter the program Then set time and press to start By pressing Custom user can
18. o claim a compensation for costs arising from the false Warranty Claim In case the Buyer makes a claim about the Goods that is legally covered by the Warranty provided by the Seller the Seller shall fix the reported defects by means of repair or by the exchange of the damaged part or product for a new one Based on the agreement of the Buyer the Seller has the right to exchange the defected Goods for a fully compatible Goods of the same or better technical characteristics The Seller is entitled to choose the form of the Warranty Claim Procedures described in this paragraph The Seller shall settle the Warranty Claim within 30 days after the delivery of the defective Goods unless a longer period has been agreed upon The day when the repaired or exchanged Goods is handed over to the Buyer is considered to be the day of the Warranty Claim settlement When the Seller is not able to settle the Warranty Claim within the agreed period due to the specific nature of the Goods defect he and the Buyer shall make an agreement about an alternative solution In case such agreement is not made the Seller is obliged to provide the Buyer with a financial compensation in the form of a refund b SEVEN SPORT s r o Borivojova 35 878 130 00 Praha 3 Czech Rebublic ICO 268 47 264 DIC CZ26847264 Orders 420 556 300 970 objednavky insportline cz Warranty Claims 420 556 770 190 Mobile 420 604 853 019 reklamace insportline cz Service 420 556 770 190 M
19. obile 420 604 853 019 servis insportline cz Fax 420 556 770 192 Service 420 556 770 191 Web www insportline cz www worker cz www worker moto cz INSPORTLINE s r o Elektri n 6471 911 01 Trencin Slovakia ICO 36311723 DIC SK2020177082 Orders 421 0 326 526 701 421 0 917 700 098 objednavky insportline sk Warranty Claims 421 0 326 526 701 421 0 918 408 519 reklamacie insportline sk Fax 421 0 326 526 705 Web www insportline sk www worker sk www worker moto sk Date of Sale Stamp and Signature of Seller 24
20. or at first before running if you have one of the following diseases 1 Cardiopathy hypertension sugar diabetes respiratory disease smoking and other chronic diseases complication disease 2 If you are over 35 years old and heavier than common weight 3 Women in pregnant or in breasting period SPECIAL TIPS FOR SAFETY Please use qualified socket If the plug and the socket is not compatible please ask electrician to handle it and don t do anything for the plug The voltage for this machine is 220V 240V Don t let power wire touch roller and also don t put power wire on the running belt Don t use damaged plug Before cleaning moving and maintaining machine please pull off plug for socket Warning If don t pull off it will cause injury or damage for the machine PACKING DETAILS Warning Carefully install the product avoid to make any damage Notice 1 Carefully read the instructions before installation Operate in accordance with procedures 2 Check components in the package 3 Remove all paper boxes and foams used as fasteners 4 Check all the following components If there is missing or problematic parts please contact the dealer Decorating cover Decorating cover for Hardware tool bag at base meter Hardware tool bag Multi wrench 1 pcs Homemade wrench 1 pcs Umbrella type allen screw Umbrella type allen screw Umbrella type cross tapping screw M8 20 6pcs M8 60 15 2pcs M4
21. rection and then tighten back the four screws for the motor The adjustment steps for running belt a Turn speed to be 6km h for running 14 b Turn both tension screws located at end of the treadmill on the right and left sides half a turn clockwise using the Allen key Diagraml and Diagram 2 c After adjustment running belt still slips please repeat the steps as above Tighten the running belt Diagram 1 Loosen the running belt Diagram 2 The adjustment steps for running belt deflection The running belt will be deflected more or less under using Then it needs to be adjusted The steps are as follows a Place the treadmill on a horizontal floor turn the speed to be 6 km h for running b If the running belt is deflected to the right adjust the bolt on the right by turning it for half a turn clockwise then adjust the bolt on the left by turning it half an anti clockwise See Diagram 3 c If the running belt is deflected to the left adjust the bolt on the left by turning it for half a turn clockwise then adjust the bolt on the right by turning it half a turn anti clockwise See Diagram 4 d After the adjustment the running belt still keeps deflecting please repeat the steps above The adjustment for right deflection Diagram 3 The adjustment for left deflection Diagram 4 Running board lubrication Silicone oil has been provided White Bottle The treadmill is brand new and has been pr
22. sword 0000 4 zeros After pairing go to desktop and click f to enter APP 2 2 Android system Enter iRunning Click to scan device select device iRunningX XX Note Please find the device no from the console Then perform Bluetooth pairing device preset pairing password 0000 4 zeros 3 Programs introduction 3 Quick Start 00 20 A D ei e mn w 4 LJ a e weie e 2 sem 7 2 ege dan ro co al Start exercise directly During exercise user can adjust Speed Incline by pressing console buttons Speed Incline adjustment as following After exercise user can share workout information via Facebook or Twitter or else go back to Homepage 3 1 1 Incline adjustment drawing 18 User may adjust treadmill incline by pressing UP DOWN key hot keys Adjust range 0 15 3 1 2 Speed adjustment drawing User may adjust training speed by pressing UP DOWN key or hot keys Adjust range 1 18 11 11 107 10 10 9 Warning During any exercise if turn on the safety switch treadmill will pause immediately and show the Warning page If turn off the safety switch system will stop current exercise and go to work out summary page Warning page 3 2 Program User can select from P1 to P20 for training After selection set training time and press to start During exercise user can adjust Speed Incl
23. uns Unadjusted Readjust it faster or slower than what has been displayed Running belt slips Running belt is not tight enough Please read point Maintenance The adjustment steps for poly V belt running belt for reference d Running belt is The running belt is unadjusted Please read point Maintenance deflected The adjustment steps for running 16 Displayed EO Safety key problem screen No sensor signal Displayed E01 on the screen belt deflection for reference Check the safety key or Reed pipe for safety key Check sensor wire whether 1t 1s been connected well or whether 1t 1s broken Displayed E02 on the The PCB problem Change the PCB screen Displayed E03 on the screen 12 Displayed E04 on the screen Displayed E05 on the screen Displayed E06 on the screen Displayed E08 on the screen Displayed E09 on the screen The speed problem Communication lines problem Over current protection The motor problem Overload protector Overhot protector Displayed E10 on the Overvoltage protector screen 18 Displayed E12 on the screen Incline alarm If find it when speed is exceed 8km h it is overweight or the broken of running board running belt Check the running board and running belt If it is the problem of running belt try to add some oil for the running belt at first If speed is not exceed 8km h change motor or PCB to check Check the conn
Download Pdf Manuals
Related Search