MM Multi Pose V2.0
Contents
1. Place 1 has seat number 0 and Place 2 has seat number 1 For seat number 0 there are three poses Sit 1 Sit 2 and Cuddle For seat number 1 there are 2 poses Sit 1 the second definition of the same name and also Cuddle The Cuddle pose is shared with seat 0 If the sitter on seat number 0 or the sitter on seat number chooses Cuddle from the menu then both seats will switch to the Cuddle pose Note that in the cuddle pose seats animations positions and rotations are defined for each seat always separated by comma The two Sit 1 definitions are not connected In this example they only use the same animation anim sit Sit 1 is the default sit pose for seat number 0 and also for seat number 1 because it is the first single sitting pose of both seats 3 3 Menu Definition The menu definitions are interspersed with the pose definitions Each menu contains the poses that are defined until the next menu definition All that is defined is just the name of the menu Example M Single P Sit 1 O anim_sit lt 0 5 0 1 0 6 gt lt 0 0 90 gt P Sit 2 O anim_lay lt 0 2 1 4 0 8 gt lt 10 20 270 gt P Sit 1 1Janim_sit lt 1 5 0 1 0 6 gt lt 0 0 100 gt M Cuddle P Cuddle 0 1 cuddle_f cuddle_m lt 0 5 0 1 0 6 gt lt 1 2 0 2 0 6 gt lt 0 0 90 gt lt 0 0 100 gt This will lead to a main menu And for a sitter on seat 0 the submenu Single will be 3 4 Give Definition Give definitions define a2. MM Multi Pose V2 0 Your professional Pose System User Manual and Developers Manual MM Multi Pose V2 0 no poseballs sim surround able Single amp multi prim very low lag direct seat selection fh single amp multi pose swap sync give Z PEPA Seript menu adjust Canis Canning SecondLife Copyright 2013 All Rights reserved 1 Introduction MMMiultiPose is meant for Furniture with multiple seats and a limited number of animations All functionality is concentrated in one script In addition there is a very small animate script for each seat A sofa with 5 seats for example uses only 98KB of Sim script storage so it will not causelag even if you use numerous of these scripts on one sim The script supports up to about 120 animations summed up over all seats Each seat has its own number of animations On each seat it can be freely swicthed between single animations couple animations and multi seat animations People on the same set of couple animations are synchronized Example imagine 2 sitters sit on seats 1 and 2 The sitter of seat 1 switches to a couple animation where seat 2 is involved So the sitter on seat 2 also automatically switches into this couple animation 1 1 Features The script supports all useful features you would expect No poseballs no silly questions when sitting down Supports one prim sitting beware this does not work with any system on some sims e g with sim
3. Manual Point to the part where you want to sit right click and select Sit from the menu To select a pose left click on the furniture and you will get a menu with a list of poses available on your seat There are several special buttons if applicable gt gt Next page of menu will switch to first page at the end lt lt Previous page of menu will switch to the last page at the start something submenu Back Go back to main menu from a submenu Swap Change seats with people in same couple multi pose Give Items Give a folder with items to wear with some poses Adjust Open the menu to adjust your position The adjust menu is easy to use All changes are immediately saved X Y Z There are three direction X Y are horizontal axes forward backward and left right of your current position Z is the up down axis You can either change your position along an axis or rotate around the axis Position Rotation You select to change your position by hitting the Position button Instead you can rotate arunfd the axis by hitting the Protations button tets S You actually move usinbg these buttons The buttons and move by a small amount The buttons and move by a larger amount List This button is only available for the owner It lists all poses on all seats with their positions and rotations Reset This resets ALL positions and rotations to the values define in
4. ll objects that will be given together in one folder to the avatar requestung them Example G book G knife The avatar hitting the button Give Items will get the two objects named book and knife in a folder named like the furniture
5. surround landscapes Supports defined seats e g cushions of a sofa so the sitter can directly choose where he wants to sit This is not supported by any other script of this kind as far as I know No silly solutions like dictating the sequence you sit down or asking you where you want to sit just point and sit Seats are defined by their names no changes are necessary when relinking the object Each sitter can adjust his sit position using menu functions Changed positions can be reset by the owner hitting the Reset button Changed positions can be listed in the format needed by the notecard by hitting the List button All positions are relative to the main prim Any changes to other prims will not affect the positions SWAP button to change seats in a couple multi animation SYNC button to resynchronize sitters in a couple multi animation One script does all the work A very small script per seat does the animations e g a 5 seat sofa will only occupy 98KB of script storage Only one configuration notecard defines all poses for all seats in an easyly understandable notecard syntax Poses can be separated into one level of freely definable submenus Give button to give a folder of items to wear 1 2 Definitions seat A place where exactly avatar can sit animation One SecondLife animation that can be performed by one avatar pose Several animations done on seats by several avatars at the same time 2 User
6. the notecard SitConfig 3 Creators manual First copy everything necessary into the inventory of one of the prims This is not necessarily the main prim but it is a good idea to place it there You need e all animations used e all objects to be given e the script MMMultiPose V2 0 one script Anim for each seat you want to use e the notecard PoseConfig Now edit the notecard It consits of lines with definitions The definitions end with a line containing end Everything after the end line is ignored you can use it for descriptions You may use empty lines but keep them to a minimum each line of a notecard needs 1 second to be read The definitions consist of fields separated by pipe characters The first fields always contains the definition type At the moment there are 4 definition types S seat definition P pose definition M menu definition G give definition 3 1 Seat Definition The seat definitions define the seats numbered from zero to the number of seats 1 If you have three seats then you have seat numbers 0 1 2 3 For each seat you define name of the prim that is used The speciual name defines the root prim so you may rename your object to whatever you want without changing the seat definitions Example S S cushion S pillow These 3 lines define the root prim to be seat 0 cushion is seat 1 and pillow is seat 2 You can define no seats
7. then all avatars are seated on one prim 3 2 Pose Definition The pose definitions define the poses A pose name is a freely definable name The same name can be used several times for different seats A pose definition consists of 6 fields pose definition type always is P pose name The name of the pose may contain blanks an special characters but no pipe character list of seats The comma separated list of seat numbers The seat numbers are given in the sequence of the seat definitions see above The first defined seat is number 0 list of animations a comma separated list of animations All animation have to be contained in the contents of the object list of positions a comma separated list of positions A position is a vector of 3 numbers enclosed in lt and gt The positions in X Y and Z direction are relative to the root prim list of rotations a comma separated list of rotations A rotation here is a vector of 3 numbers that are the rotations around the X Y and Z achsis given in degree The rotation is given relative to the root prim Example S Place 1 S Place 2 P Sit 1 Ojanim_sit lt 0 5 0 1 0 6 gt lt 0 0 90 gt P Sit 2 Ojanim_lay lt 0 2 1 4 0 8 gt lt 10 20 270 gt P Sit 1 1 anim_sit lt 1 5 0 1 0 6 gt lt 0 0 100 gt P Cuddle 0 1 cuddle_f cuddle_m lt 0 5 0 1 0 6 gt lt 1 2 0 2 0 6 gt lt 0 0 90 gt lt 0 0 100 gt In this example are 2 seats
Download Pdf Manuals
Related Search