Manual - Lumens
Contents
1. Lumens English 13 4 4 Start Using the DC210 Control Panel Remote Control s e 9 8B LAMP AUTO TUNE M OM 4 o BRT ENTER BRT When using the remote control aim at the receptor on the DC210 and press the power button e Once DC210 is turned on the LED on the control panel will flash a few times and stay lit Please contact your distributor if the LED is not on 4 5 Installing remote control holder Insert the holder over the gooseneck of the camera and push it down Lumens English 14 4 6 Installing driver and application queue After installing the USB driver and application queue you can use the following functions via the software Control the DC210 Capture and record images Annotate the image highlight important details and save it Supports the full screen function 4 6 1 System requirements Operating Windows XP Windows Vista System Minimum e CPU 2 8 GHz CPU 2 8 GHz above System above e Memory 1GB Requirements e Memory 512MB e Support Direct X 9 e Support Direct X 9 Resolution 1024x768 e Resolution Minimum Hard Disc 1024x768 Space Required e Minimum Hard 100MB Disc Space Required 100MB 4 6 2 Installation steps PC v10 4 10 v10 5 e CPU PowerPC G4 866MHz or Intel Pentium 1 83GHz Intel Core 2 Duo processor e Memory 512MB e 1 024 x 768 screen resolution and 24 bit color display e Minimum Hard Disc Space R2. Lumens English 4 B Safety Precautions Warning To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture This visual presenter has a 3 wire AC line Plug This is a safety feature to ensure that the plug will fit into the power outlet Do not try to disable this safety feature If the visual presenter will not be used for a long period of time unplug it from the power outlet RISK OF ELECTRIC SHOCK Note To reduce the risk of electric shock Do not remove cover or back No user serviceable parts inside Refer servicing to licensed service Personnel This symbol indicates that This symbol indicates that this equipment may contain there are important operating dangerous voltage which and maintenance could cause electric shock instructions in this User Manual with this unit B FCC Warning This equipment has been tested and found to comply with the limits for a Class A or B digital device pursuant to Part 15 of FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation B EN55022 CE Radiation Warning This product is intended for use in a commercial industrial or educational environment It is not intended for residential use This is a Class A product In a domestic environment it may cause radio interference in which case the user may be required to take adequate measures The typical use is ina conferen
3. 4 Press MENU to exit Remote control 1 Press PLAYBACK 2 Press 4 or v or 4 or gt to select the thumbnail you want you delete Press ENTER Press MENU to enter the setting menu Press gt or to select Storage Press v to select Delete Press ENTER to confirm the deletion Ol c E dd 7 12 would like to automatically delete the captured images whenever it is turned off Auto Erase 1 Press MENU on the remote control or control panel to enter the setting menu Press gt or 4 to Storage menu Press 4 or v to Auto Erase Press gt or 4 to select ON Press 4 or v to select Yes Press Enter to activate oo de EA Do 7 131 would like to resume the factory default setting Factory Reset 1 Press Menu on the remote control or control panel to enter the Lumens English 29 setting menu Press gt or 4 to the Setting menu Press v to the Factory Reset Press gt or 4 to select Yes Press Enter to activate Si cw EM DS 7 14 Computer related functions Ensure that the USB cable is connected and the drivers are installed before using the computer related functions Refer to DC210 User Manual Chapter 4 Installation and Connections 4 3 Connecting Devices and 4 6 Installing Driver and Application queue 7 14 1 would like to insert a photo in MS Paint 1 Click File From Scanner or Camera in MS Paint shown as the bottom left figur
4. Anyone who uses this computer all users O Only for me SW InstallShield InstallShield 6 Once the installation is completed press Finish If you want to create a shortcut on the desktop press Yes queue InstallShield Wizard InstallShield Wizard Complete The InstallShield Wizard has successfully installed queue Click Finish to exit the wizard Question 2 Do you want to create a queue shortcut at your desktop i Finish i Cancel Lumens English 16 7 Then the program will automatically install the driver Please follow the instructions on the screen to install the driver i Visual Presenter V1 O x i Visual Presenter V1 Welcome to the Visual Presenter V1 Setup Wizard Select Installation Folder Z2 uA The installer will guide vou through the steps required to install Visual Presenter V1 on your The installer will install Visual Presenter V1 to the following folder computer To install in this folder click Next To install to a different folder enter it below or click Browse Eolder C Program Files Visual Presenter Visual Presenter V1 Disk Cost WARNING This computer program is protected by copyright law and international treaties Install Visual Presenter V1 for yourself or for anyone who uses this computer Unauthorized duplication or distribution of this program or any portion of it may result in severe civil or criminal penalties and will
5. O Yes now and every time connect a device What do you want the wizard to do Click Next to continue Click Next to continue Lumens English 18 Hardware Installation The software you are installing for this hardware Visual Presenter V1 has not passed Windows Logo testing to verify its compatibility with Windows XP Tell me why this testing is important Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing Continue Anyway Found New Hardware Wizard Completing the Found New Hardware Wizard The wizard has finished installing the software for em Visual Presenter V1 39 Click Finish to close the wizard 11 The Visual Presenter V1 Memory program will be installed automatically Please follow the instructions on the screen to install the program Found New Hardware Wizard Welcome to the Found New Hardware Wizard Windows will search for current and updated software by looking on your computer on the hardware installation CD or on the Windows Update Web site with your permission Read our privacy policy Can Windows connect to Windows Update to search for software O Yes this time only O Yes now and every time connect a device Clic
6. 1 Click Insert Image From Scanner or Camera in MS Word 7l Document Microsoft Word t File Edit View Insert Format Tools Table Window Help N L idi Break Page Numbers Date and Time Symbol Number Text Box 3b Hyperlink Ctrl K x 2 Select Visual Presenter V1 TWAIN and click Custom Insert niert Picture ram Scanner er Camera E Gi Add Pictures to C n Organiser aumonkwet come Lumens English 31 3 A window showing a live image see below will be displayed Insert Captured Image Setting Cancel 4 Press Setting To control the DC210 via the Camera Settings interface The operating procedure is the same with the remote control and control panel of the DC210 Refer to DC210 User Manual Chapter 6 Control Panel Remote Control and Setting Menu 5 Press Capture to capture images in MS Word 6 Press Cancel to exit Lumens English 32 7 14 4 would like to set the DC210 as a webcam for Skype The DC210 can be used as a webcam for teleconferencing software such as Skype and MSN The following instructions use Skype as an example 1 Open Skype and enter Tools Options 2 Select Video Settings gt webcam Visual Presenter V1 and check Start my video automatically when am in a call as shown below S Skype Options General 8 aeneral Settings a Aud v Enable wpne
7. English 27 7 5 l would like to adjust the brightness If you use the remote control or the control panel 1 Press BRT to make it brighter 2 Press BRT to make it darker 7T 6 would like to turn on off the lamp Control panel 1 The lamp is ON by default Press LAMP to switch ON OFF Remote control 1 Press MENU to enter the setting menu 2 Press gt or 4 to select Setting 3 Press v to select Lamp 4 Press gt or 4 to switch ON OFF 7 7 would like to automatically adjust the image to have best brightness and focusing performance 1 Press Auto Tune on the control panel 7 8 would like to capture images 1 Press Capture on the remote control or control panel 7 9 I would like to freeze images 1 Press FREEZE on the remote control or control panel 7 10 would like to view captured images 1 Press PLAYBACK on the remote control or control panel to display thumbnails of all captured images 2 Press 4 or v or 4 or gt to select the thumbnail you want you view 3 Press ENTER for the full screen display of the image Lumens English 28 4 Press gt or 4 to turn to the previous next image 5 Press PLAYBACK to exit 6 Press MENU to exit 7 11 would like to delete captured images Control panel 1 Press PLAYBACK 2 Press 4 or v or 4 or gt to select the thumbnail you want you delete 3 Press DEL to delete the file
8. Turn on the DC210 4 Select queue to begin installation and follow the screen instructions Lumens queue Lumens queue Uninstall Lumens queue X Queue install zip Untitled Lumens English 20 4 6 4 Verifying the installation is completed PC 1 Find queue on the desktop of the computer ig 2 Double click the queue shortcut on the desktop or click Start Programs queue 3 queue y E Uninstall queue Remark Please refer to the User Manual of queue for how to use it 4 6 5 Verifying the installation is completed MAPC 1 Find queue from Applications e De LA Applications 4 gt is m amp Network Xo E Macintosh HD Q Pa mean QuickTime Player 3 Untitled Os Alinone d e pe 5 f Applications P Sherlock Stickies HE Desktop A 7 LA DET gt TextEdit Utilities Es Movies MY Pictures e Music queue 39 items 3 8 GB available lt Remark gt Please refer to the User Manual of queue for how to use it Lumens English 21 Chapter 5DIP Switch Settings Note You must re start DC210 for DIP switching configuration to take effective 5 1 Connecting to a projector or monitor 5 1 1 XGA output default values lajala aI oo pni 5 1 2 SVGA output 5 1 3 Reserved 5 1 4 Reserved Lumens English 22 5 2 Connecting to a TV 5 2 1 NTSC America Taiw
9. image size Remote control Booms nosas or decrease Me mase sre Control contol panel Lumens English 24 6 2 Setting Menu 6 2 1 VGA Mode lt Remark gt Press Menu on the remote control or control panel to enter the setting menu The bold underlined values in the following table are the defaults 1 Level Major Items Microscope Film Microscope mode Freeze ONJOFE Freeze the image on the screen Gamma PhotoTet Select Photo or Textmode ma Digital Zoom 4E SP Zmh Focus 4L IP Manually tune the focus Storage Delete Execute Delete the captured image Delete All Delete all images Format the memory Delete all saved images Auto Erase ON OFF automatically when the system is turned down ESE ON OFF Turn on off the lamp 2 Level 3 Level Minor Items Adjustment values p ncdoneschpsgons Auto Exposure ON OFF Auto Exposure is on Execute Execute Auto White Balance Set up Night Vision or cancel Nightvision vision ON OFF Night Vision English Spanish Menu Factory Reset Reset all values to default values Advance Download the saved parameter Preset Load Yes No profile such as Brightness Lamp Zoom etc Preset Save Yes No Save the parameter profile such as Brightness Lamp Zoom etc Lumens English 25 6 2 2 C Video Mode st 1 Level 2nd 1 evel Maior J Minor Items 3 Level Adjustment Function Descriptions It
10. 5 1 Connecting to a projector or monitor lt lt 22 52 Conhecibg lO 9 T V ssaassoiaaseesisazerosatiesttssudloesesbsBtlasis8sbsotcatf noliloagebsgblekzsie 23 Chapter 6 Control Panel Remote Control and Setting Menu 24 6 1 Functions of control panel and remote control 24 GHI rm 25 Lumens English 1 Chapter 7 Descriptions of major functions 27 7 4 would like to switch image SOUrces 27 7 2 would like to make text clearer and photos more colorful 27 7 3 would like to zoom in out of IMages lt lt ss 27 7 4 would like to use the auto fOCUS Seo 2f 7 5 would like to adjust the brighfness cc lt 28 7 6 would like to turn on off the lamp c2 28 7 f would like to automatically adjust the image to have best brightness and focusing performance lt lt 28 7 8 would like to capture IMAGES 28 7 9 I would like to freeze images ii 28 7 10 would like to view captured images 28 71 11 would like to delete captured imagesS 29 71 12 l would like to automatically delete the captured images whenever it is turned off Auto Erase 29 7 13 l would l
11. DC210 Visual Presenter User Manual Important To download the latest version of Quick Start Guide multilingual user manual software or driver etc please visit Lumens http www lumens com tw aoto htm Lumens Brilliance by Design http www lumens com tw Contents Copyright Informall h sioe ipsius malaria 3 Chapter 1 JPrecaullofiS cuisusies cian uia coS anui 0 cR POE arrotolata 4 Safety ud Wo 6r2 Ut 0 po ERREUR cR 5 FAN NC apres acres totes setae 5 EN55022 CE Radiation Warning 5 Chapter 2 Package Confentf ng nh 6 Chapter 3 Product VerVview cv 7 3 1 Relative position of the presenter and DC210 8 3 2 Recommenddistance eene 8 3 3 ICDOITEOL USE i 9 Chapter 4 Installation and Connections 10 4T System DIAGE SE cccucievven tester vuv d eala A ania aaa Eu dan 10 4 2 Mounting the DC210 at Desktop 11 4 3 Connecting with COMponeEnts 11 4 4 Start Using the DCZ210 Q0 SH HH HH HH nennen 14 4 5 Installing remote control holder lt lt lt s ssxx ssxssss 14 4 6 Installing driver and application queue 15 Chapter 5 DIP Switch Setfings nung 22
12. Presenter V1 queue and other applications V1 queue or other cannot be executed simultaneously Only one application cannot application can be executed at a time Please close be executed the currently running applications and then execute simultaneously the application to be used Lumens English 38 Lumens http www lumens com tw 10 MAR 2009 Version 01 P N 5080096 50
13. Video in Seltinne 2 C Start my video automatically when I am in aja l Privacy te Notifications o Calls Chats amp SMS ik Advanced Automatically receive video from O anyone only people in my Contact List Ono one Other things you can do o Learn more about setting up your webcam a Buy a web camera from the Skype Shop Video Settings set up your webcar Take a video snapshot Show that I have video to people in my Contact List Ono one 3 Start calling your contact When both sides are connected Skype will display the video screen Skype san chen File Account Cal Chats View Tools Help San 000 314 8 Call cheaply to mobile phones and landlines NA Ww A 5 area DoD 274 EQ Add Callers C5 v Do More Alfred O00 274 3 d Video started NE Call Duration 00 14 I 8 Ge Sy ee Gy m r Xo amp Callwith Alfred DOD 274 7 543 414 peop Lumens English 33 7 14 5 would like to set the DC210 as a PC Camera 1 Click My computer window and select Visual Presenter V1 to open live screen Files Stored en This Computer System Tasks g Vemm system information G G 1 Add or rene proce ame Shared Sus o Change a setting Documenti Docurents Hard Disk Drives Loci ek C Daka Do Devices wth Removeble Storage i A ape j3 Fkppw CO Drie Es aii oan and Carer tizi Veal Presence V Presenter 7 14 6 would like to con
14. an Panama Philippines Canada Chile Japan Korea and Mexico ooo 5 2 2 PAL Countries regions not listed above Uan lt Remark gt It doesn t support C Video and VGA simultaneously Once C Video is on VGA OUT is not supported Lumens English 23 Chapter 6 Control Panel Remote Control and Setting Menu 6 1 Functions of control panel and remote control Remark The below functions are listed alphabetically Function Descriptions Operation Turn on and off the visual presenter Remote control Control panel Move up down left or right to select the Remote control needed function Control panel AF AF button Both lateral sides of the Remote control Lens Auto Tune Automatically adjust the image to have the Control Panel best brightness and focusing performance BRT Manually adjust the brightness of the Remote control image Control panel Capture Capture the image to the internal memory Remote control Control panel Delete Delete the image stored in the internal Control Panel memory Enter Activate functions Remote control Control panel Rotate the image for 180 degrees Remote control Control panel Freeze the current image to temporarily Remote control stay on the screen Press again to Control panel defreeze menu Control panel Control panel Switch between different sources of Remote control signals Control panel 1 Live images default 2 PC Zoom Increase or decrease the
15. be prosecuted to the maximum extent possible under the law Everyone O Just me i Visual Presenter V1 Confirm Installation The installer is ready to install Visual Presenter V1 on your computer Visual Presenter V1 has been successfully installed Click Next to start the installation Click Close to exit Cancel InstallShield Wizard Complete The InstallShield Wizard has successfully installed queue Before you can use the program you must restart your computer O No will restart my computer later Remove any disks from their drives and then click Finish to complete setup Lumens English 17 9 After the reboot the USB Composite Device program will be installed automatically Please follow the instructions on the screen to install the program Found New Hardware Wizard Found New Hardware Wizard Welcome to the Found New Hardware Wizard Windows will search for current and updated software by looking on your computer on the hardware installation CD or on the Windows Update Web site with your permission Read our privacy policy Can Windows connect to Windows Update to search for software O Yes this time only This wizard helps you install software for USB Composite Device If your hardware came with an installation CD E or floppy disk insert it now O Yes now and every time connect a device What do you want the wizard to do oi O Install from a list or specifi
16. c location Advanced Click Next to continue Hardware Installation Completing the Found New The software you are installing for this hardware Hardware Wizard USB Composite Device The wizard has finished installing the software for USB Composite Device has not passed Windows Logo testing to verify its compatibility with Windows XP Tell me why this testing is important Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing Click Finish to close the wizard Continue Anyway STOP Installation Bk E Hah ill Cancel 10 The Visual Presenter V1 program will be installed automatically Please follow the instructions on the screen to install the program Found New Hardware Wizard Found New Hardware Wizard Welcome to the Found New Hardware Wizard Windows will search for current and updated software by This wizard helps you install software for looking on your computer on the hardware installation CD or on the Windows Update Web site with your permission Visual Presenter V1 Read our privacy policy If your hardware came with an installation CD Can Windows connect to Windows Update to search for SED or floppy disk insert it now software O Yes this time only
17. ce room meeting room or auditorium Lumens English 5 Chapter 2 Package Content Quick Start Guide English User Manual For download of other language versions please visit Lumens website Base Installation Guide Download Card E E Remote Control Box VGA Cable C Video Cable Power Cord Microscope Adapter e Padded Carry Bag Optional lt gt e Lumens English 6 Appearance may vary with country region Software Bag Backlight Optional Chapter 3Product Overview SOURCE v 8s LAMP AUTO TUNE q ZOOM 4 oem BRT ENTER BRT POWER 6 DIP Switch Settings lt Bottom Lumens English 7 3 1 Relative position of the presenter and DC210 DC210 Presenter 3 2 Recommend distance About 400 mm distance between camera and the desktop is recommended Lumens English 8 3 3 Incorrect use Lumens English 9 Chapter 4Installation and Connections PC onto Oe C VIDED OUT USB RSZ32 Lumens English 10 4 2 Mounting the DC210 at Desktop 1 Please set up the DIP Switch settings first Refer to Chapter 5 DIP Switch Settings in the DC210 user manual 2 Please refer to the Base Installation Guide for installation instructions for all parts 4 3 Connecting with components 4 3 1 Step 1 Plugging in the Power Outlet P gging AC Outlet lt Note gt Appearance of power cord may vary with count
18. e gt Capture Pictures from Video W untitled Paint mim Edit View Image Colors Help Which picture do l m want to copy a CN cus ne captu xe buton eee ae rds a piete enre ees Eben select the picture you want to New Ctrl M pore oo Open Chri Save Ctrl 5 Save As From Scanner or Camera Print Preview Page Setup Print Ctrl F 2 Click Get Picture will capture the photos of live images and insert the files in use shown as top right figure 7 14 2 would like to insert a photo in MS Word 1 Click Insert Image From Scanner or Camera in MS Word Zl Document Microsoft Word t File Edit View Insert Format Tools Table Window Help Break Le 14 3100 x Page Numbers Date and Time Symbol T Text Box LS Erom File e From Scanner or Camera gt AutoShapes 2 SD Hyperlink Ctrl K i y Lumens English 30 2 Select Visual Presenter V1 and click Custom Insert naert Picture from Scanner sr Camera 7 dd Pictures En C n Organizer 7 Capture Pictures from Video Which picture do you want to copy Click the Capture button to create a picture from the video Then select the picture vou want to retrieve and click Get Picture to bring it into your application b Ta 7 14 3 would like to change the setting of DC210 then capture a photo in MS Word
19. ems values 0 A 200 Manually tune the focus Display Gamma PheoTet Select Photo Text Mode image Normal Gray Select Normal Gray Mode Night Vision On Off E Night Vision or cancel Night Factory Reset Reset all values to default values Lumens English 26 Chapter 7 Descriptions of major functions 7 1 would like to switch image sources The default of image source is Live Image Press SOURCE on the remote control or the control panel to switch to Live Image Default and computer in turns 7 2 would like to make text clearer and photos more colorful The default of Gamma is Photo Photo Mode e Photo default for viewing photos or text with photos and will make the photos more colorful Text for viewing text files and will make the text clearer To change the settings please use the remote control or the control panel 1 Press MENU to enter the setting menu 2 Press gt or 4 to the Display 3 Press v to select Gamma 4 Press v to select Photo Text Please refer to the text above and make the most appropriate selection 5 Press MENU to exit 7 3 would like to zoom in out of images 1 Press Zoom on the remote control or control panel to zoom in 2 Press Zoom on the remote control or control panel to zoom out 7 4 would like to use the auto focus 1 Press AF on the remote control 2 Press the AF button on the camera head of main unit Lumens
20. equired 1GB e QuickTime 7 4 5 above 1 Please download the software queue at the following URL http www lumens com tw goto htm 2 Connect the DC210 to a computer through a USB interface Refer to DC210 User Manual 4 3 Connecting Devices Connecting to a computer Connecting to a computer through USB 3 Turn on the DC210 4 Begin the queue installation wizard Select the preferred language and press Next queue InstallShield Wizard Choose Setup Language Select the language for the installation from the choices below Chinese Traditional Lumens English 15 5 Press Next and follow the instructions on the screen to install the software queue InstallShield Wizard x queue InstallShield Wizard Choose Destination Location Welcome to the InstallShield Wizard for queue Select folder where setup will install fles du Install queue to The InstallShield Wizard will install queue on your CAP Files computer To continue click Next V rogram Files queue InstallShield i Cancel queue InstallShield Wizard Customer Information Ready to Install the Program Please enter your information The wizard is ready to begin installation User Name Click Install to begin the installation sw If you want to review or change any of your installation settings click Back Click Cancel to exit the wizard Company Name aBd Install this application for
21. ike to resume the factory default setting Factory Reset 29 7 14 Computer related fuNctions 30 7 14 1 would like to insert a photo in MS Paint 30 7 14 2 would like to insert a photo in MS Word 30 7 14 3 would like to change the setting of DC210 then capture a photo in MS Word 31 7 14 4 would like to set the DC210 as a webcam for Skype 33 7 14 5 would like to set the DC210 as a PC Camera 34 7 14 6 would like to connect Interactive Whiteboard 34 Chapter 8 Connecting to Microscope eere nennen 37 Chapter9 Troubleshoofing ng 38 Lumens English 2 Copyright Information Copyrights Lumens Digital Optics Inc All rights reserved Lumens is a trademark that is currently being registered by Lumens Digital Optics Inc Copying reproducing or transmitting this file is not allowed if a license is not provided by Lumens Digital Optics Inc unless copying this file is for the purpose of backup after purchasing this product In order to keep improving the product Lumens Digital Optics Inc hereby reserves the right to make changes to product specifications without prior notice The information in this file is subject to change without prior notice To fully explain or describe how this product should be used this man
22. k Next to continue Hardware Installation The software you are installing for this hardware Visual Presenter V1 Memory has not passed Windows Logo testing to verify its compatibility with Windows XP Tell me why this testing is important Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing Continue Anyway STOP Installation 12 All installation completed 4 6 3 Installation steps MAC Found New Hardware Wizard This wizard helps you install software for Visual Presenter V1 Memory If your hardware came with an installation CD E or floppy disk insert it now What do you want the wizard to do Install from a list or specific location Advanced Click Next to continue Completing the Found New Hardware Wizard The wizard has finished installing the software for s3 Visual Presenter V1 Memory Click Finish to close the wizard 1 Please download the software queue at the following URL http www lumens com tw goto htm Lumens English 19 2 Connect the DC210 to a computer through a USB interface Refer to Chapter 4 Installation and Connections 4 3 Connecting Devices Connecting to a computer Connecting to a computer through USB 3
23. lead or the plug Unplug the projector from the wall socket before cleaning Use a damp cloth for cleaning Do not use liquid or aerosol cleaners Do not block the slots and openings in the projector case They provide ventilation and prevent the visual presenter from overheating Do not place the visual presenter on a sofa rug or other soft surface or in a built in installation unless proper ventilation is provided Never push objects of any kind through cabinet slots Never allow liquid of any kind to spill into the visual presenter Except as specifically instructed in this User Manual do not attempt to operate this product by yourself Opening or removing covers may expose you to dangerous voltages and other hazards Refer all servicing to licensed service personnel Unplug the visual presenter during thunderstorms or if it is not going to be used for an extended period do not place the visual presenter or remote control on top of heat emitting equipment or heated objects such as a car and etc Unplug the visual presenter from the wall outlet and refer serving to licensed service personnel when the following situations happen If the power cable or plug becomes damaged or frayed If liquid is spilled into it or the visual presenter has been exposed to rain or water lt Note gt Using an incorrect battery type in the remote control may result in breakdown Follow your country s instructions on how to dispose of used batteries
24. nect Interactive Whiteboard 1 System Diagram Projector gt Screen Z7 Lumens English 34 2 Using StarBoard 2 1 Install LuLulizer and execute LuLulizer exe Note Please download LuLulizer from the website www lumens com tw goto htm 2 2 Press StarBoard LULU 2 3 Display the live image 2 4 Press StarBoard Mode TWAIN Please refer to the operations of 7 14 2 would like to insert a hoto in MS Word and 7 14 3 would like to change the setting of DC210 then capture a photo in MS Word Lumens English 35 3 Using StarBoard 3 1 Press Insert Picture From Scanner u Untitled SMART Notebook File Edit View gus Format Draw Help 4 gt h P Blank Page Ctrl M Picture File E o L a SHB 1 Picture From SMARTI Document Camera EJ Flash File Senteo Question i Senteo Title Page Flash Video File 3 2 Please refer to the operations of 7 14 2 would like to insert a hoto in MS Word and 7 14 3 would like to change the setting of DC210 then capture a photo in MS Word Lumens English 36 Chapter 8 Connecting to Microscope 1 Mount the microscope adaptor onto the microscope Note Microscope adapter accessories are applicable to eyepieces of 28mm 2 The lens of DC210 connects with the microscope adaptor 3 Select the Microscope Mode 3 1 If you use the c
25. ontrol panel or the remote control 3 1 1 Press MENU to enter the setting menu 3 1 2 Press gt or 4 to the Display 3 1 3 Press v to select Mode 3 1 4 Press gt or 4 to the Microscope 4 If the image is not clear 4 1 Please adjust the focus of microscope 4 2 Press the AF button on the DC210 camera head of main unit to activate the auto focus Lumens English 37 Chapter 9 Troubleshooting This chapter describes problems you may encounter while using DC210 If you have questions please refer to related chapters and follow all the suggested solutions If the problem still occurred please contact our distributors or service center Make sure you have plugged in the power cord No image output 1 Check the power from the DC210 2 Check the connection Refer to DC210 User Manual Chapter 4 Installation and Connections 4 3 Connecting Devices 3 Check the Source refer to DC210 User Manual Chapter 7 Descriptions of major functions 7 1 would like to switch image sources 4 Check the settings for the source of the projector For the appropriate input selection of the projector refer to the projectors user manual Check if DIP Switch is properly set Refer to DC210 User Manual Chapter 5 DIP Switch Settings for related settings Probably the document is too close Press Zoom on the remote control or control panel Or pull away the distance between document and lens then press AF Visual
26. ries regions 4 3 2 Step 2 Connecting with components gt Connecting to a projector Use VGA cable to connect VGA OUT connector on DC210 to a projector or the VGA IN connector on a monitor gt Connecting to a monitor Use VGA cable to connect VGA PASSTHROUGH connector on DC210 to the VGA IN connector on a monitor Note The TO VGA PASSTHROUGH connector only outputs VGA IN signals Lumens English 11 Connecting to a TV 1 Using C Video cable to connect C Video OUT connector on DC210 to TV 2 Adjust DIP Switch Setting B NTSC America Taiwan Panama Philippine Canada Chile Japan Korea and Mexico got B PAL Country region not listed above BB Note In C Video Mode some buttons on the machine panel and remote control are not working Note It doesn t support C Video and VGA simultaneously Once C Video is on VGA OUT is not supported 3 After DC210 is re started new DIP switch configuration is effective Lumens English 12 Connecting to a computer Use VGA cable to connect VGA IN connector on DC210 to the VGA OUT connector on the computer e Using USB cable After using the USB cable to connect to a computer please refer to Chapter 4 Installation and Connection of the User Manual to install the application software Using RS232 Adapter cable Optional After connecting the RS232 Adapter cable you can use RS232 commands
27. ual may refer to names of other products or companies nevertheless without any intention of infringement Disclaimer of warranties Lumens Digital Optics Inc is neither responsible for any possible technological editorial errors or omissions nor responsible for any incidental or related damages arising from providing this file using or operating this product Lumens English 3 Chapter 1 Precautions Always follow these safety instructions when setting up and using the visual presenter TH IY pe o Do not place visual presenter in tilted position Do not place the visual presenter on an unstable trolley stand or table Do not use the visual presenter near water or source of heat Use attachments only as recommended Use the type of power source indicated on the visual presenter If you are not sure of the type of power available consult your dealer or local electricity company for advice Place the visual presenter on a place that it can be unplugged easily Always take the following precautions when handling the plug Failure to do so may result in sparks or fire E Ensure the plug is free of dust before inserting it into a socket Ensure that the plug is inserted into the socket securely Do not overload wall sockets extensions leads or multi way plug boards as this may cause fire or electric shock Do not place the visual presenter where the cord can be stepped on as this may result in fraying or damage to the
Download Pdf Manuals
Related Search