Home

ECH-PCI-CE-H2C

1. PCT Express Root Patt 2706 rkeKR B2001G ICH Famy Ius Controler 2704 InkeKR S2801GB GR ICH Family LPC iter ave Controller 2788 Ag Irkekh AZEOLGRIGHIGHM CHT Feeity PCI Express Raat Peet 270 InkeXR GZQOLGRIGHGHM ICH Famy PCL Express Root Port 27E IrkekR MSG P PCI Express Rout Port 2771 Ag Ireekh 1SG P Processor to 1 0 Controller 2770 SAPP Read Date Port Microcode Update Device WY Meorosoft ACPI Comehant System Y Murosolt System Management BIOS Driver Wy Motherboord resources WY Motherboord resources Y Motherboard resources 1Y Motherboord resources WY Motherboard resources Maumere data processor Y Programmable nterrupt controber Y System board F System board System Coroiredl time dock Syste pre System tener 3 Terminal Server Device Redirector Figure 2 13 Sample screen shot of Device Manager CONTEC ECH PCI CE H2C 19 2 Setup Connecting the CX100n Connectting the CX100n 1 Remove four screws ECH PCI CE H2C CX100n Figure 2 14 Removing the screws CX100n 2 Fasten the Brackets with attached Brackets fixed screwes Figure 2 15 Attaching the Brackets 20 CONTEC ECH PCI CE H2C 2 Setup Installation Requirements Be sure that the ambient temperature is within the range specified in the installation environment requirement by making space between the product and device that generates heat or exhaust air Distances between this product and it
2. unplug the AC power cables from wall outlets Follow the procedure below to install the expansion board on this product 1 Unplug the Power connector and Connection Cable from this product 2 Remove six screwes from the side panel then remove the chassis cover Figure 2 9 Removing the cover fittings Figure 2 10 Installing the Expansion Board 3 Plug the expansion board into a PCI slot and fasten the brackets with the attached screw Apply fasten the bundled attachment fittings with a screw Slot covers to unused slots and fasten them with screws 4 Put the chassis cover back in place and fasten it with the removed screws CONTEC ECH PCI CE H2C 15 2 Setup Step 4 Connecting the Cable Connecting the connection cable to the Expansion Adapter Refer to the user s manual for the expansion adapter EAD CE LPE EAD CE EC to connect its connection cable to the expansion adapter Connecting the connection cable to this product Connect the connector of the connection cable to the connector of this product Picture is ECH PCI CE H2C Figure 2 11 Connecting the connection cable to this product CAUTION Do not plug the connection cable into any other connector as doing so can cause a fault Connecting the AC adapter 1 Connect the Power connector to this product Picture is ECH PCI CE H2C Figure 2 12 Connecting the Power connector of AC adapter 2 Plug the AC power cable into
3. any expansion board Do not plug or unplug the cable interconnecting the PC and the expansion chassis with the PC or this product powered Do not turn on or off the power switch of this product with the PC powered Doing so may result in a malfunction The total current consumption by the boards installed in the expansion slots in this product must not exceed the maximum power capacity of its power supply Failure to supply ample power to expansion boards could result in a malfunction overheating or fault The external supply voltage or drive current must not exceed the rating Do not connect any signal other than specified to the on board connector Doing so may result in a malfunction overheating fault or damage When plugging or unplugging the power connector be sure to hold it by the connector itself CONTEC ECH PCI CE H2C 5 1 Before Using the Product Since the expansion chassis is a precision device do not store or use it where it is subject to shock or vibration Also avoid any place where the chassis is exposed to direct sunlight extremely high humidity or much dust Do not use or store the chassis where it is exposed to any chemical either directly or as vapor in the air The chassis has ventilating slits to prevent it from overheating Avoid using the chassis with the ventilating slits blocked or in an ill ventilated place Do not use the chassis near equipment generating a strong ma
4. power cable Turn 2 x 1pc CONTEC 24 ECH PCI CE H2C 3 About Hardware Physical Dimensions a io o o 6 gag o I i Py ge s of mm Figure 3 1 Outside Dimensions lt ECH PCI CE H2C Vertically placed gt When you fasten the bundled brackets to be fixed to the body you should use the attached screws M4 x 10 g A o o oF Sw oO Oo Oo Npa D Aan o oO o lol o 7 o a uF oe 182 50 l 50 200 210 mm N j Figure 3 2 Outside Dimensions lt ECH PCI CE H2C Horizontally placed gt When you fasten the bundled brackets to be fixed to the body you should use the attached screws M4 x 10 CONTEC ECH PCI CE H2C 25 3 About Hardware CAUTION When using this chassis keep it at least 20mm away from any object such as the wall for cooling purposes L iil i a mm Figure 3 3 Outside Dimensions lt ECH PCI CE H2C CX100n gt CAUTION When using this chas
5. sessssesssssssesssistsretsrsrsrereresrersrees 16 CONTEC ECH PCI CE H2C iii Connecting the connection cable to this product ccccesesceseeeeseeseseeeeseeeeeeseeeeseeeseeeeaeeetaeeesaees 16 Connecting the AG adapter vos svsscscsscvscssecessacesecsvassscuscccasanareareuaesasscacnsvaseeessasereesevayusetaaacieerseceeyh 16 Plugging the AC Power Cable seriero ii E REEE EE a 17 Step 5 Installing the expansion adapter board s s sssessseeesistsrsesterssesssrstsrsttstresresesestsretstesnsestsesesrsres 18 Step 6 Setup and Checkers EEE EE EEEE ER EER 18 Starting the system Setting up the hardware in Windows csesesssseseeseeeeseeeeseeeesceeeseeesesecseeecseeecaeeseseeaeesaeeeeseeeaeees 19 Checking the hardware in Windows scsssssssssseseeseeeeeeeseeeseeeeseeeeseeeseeeeaeeseseeeeeeeseeeeaeeeeaeeeeeees 19 Connecting the CX 100m e sessie is A EE SERA A E E 20 Connectting the CX100i seene eria E AAE ANE N ee Ear SEE a ai 20 Installation Requirement siseissscesesssscetessscenssccasaseazsvnsorssaciedesssvaneessbarseag coussesscdededacaavasersstzisvensssoebere 21 Setup Troubleshooting noei Eea E E E a 22 Symptoms and Actions 3 ABOUT HARDWARE 23 Hardware specification yoii a e E E A E EAE E E a 23 Physical DiImeEnSiOns Sossen en aea aA ERREA N EES E EEA E E NA 25 CONTEC iv ECH PCI CE H2C 1 Before Using the Product 1 Before Using the Product This chapter provides information you should know before usin
6. the AC adapter 3 Plug the AC power cable into a wall outlet This product has no power switch CAUTION Do not connect the Power connector to this product after plugging the AC power cable into the wall outlet or the expansion chassis may cause a fault Connect the AC adapter to this product first then plug the AC power cable into the wall outlet CONTEC 16 ECH PCI CE H2C 2 Setup Plugging the AC Power Cable 1 Please pull the AC power cable out of the wall power outlet 2 Please confirm the led on the front panel of expansion chassises is turned off 3 Please pull out the AC power cable from AC adaptor 4 Please pull out the Power connector from chassis CAUTION Do not pull out the Power connector from chassis whenAC power cable is still connecting to the wall power outlet This may cause product malfunction Please pull out the Power connector from the chassis after unplugging AC power cable from the wall power outlet CONTEC ECH PCI CE H2C 17 2 Setup Step 5 Installing the expansion adapter board Refer to the user s manual for the expansion adapter EAD CE LPE EAD CE EC to install the expansion bus adapter on the PC Step 6 Setup and Check Starting the system This product is turned on and off in power supply Turning on the system 1 Connect the Power connector to this product 2 Plug the AC power cable into a wall outlet 3 Make sure that the POWER LED o
7. 2C gt DC Power Input Connector DC IN To supply the power always use the power supply listed below Rated input voltage 12 24VDC Range of input voltage 10 8 31 2VDC Power capacity 12V 4 0A or more 24V 1 9A or more Table 2 1 DC Power Connector Connector type 9360 04P mfd by ALEX Pin No Signal name 2 GND alla a lh 3 12 24V 4 12 24V Applicable connector on the connector side Housing 9357 04 mfd by ALEX or 5557 04R mfd by MOLEX Contact 4256T2 LF AWG18 24 mfd by ALEX or 5556 AWG18 24 mfd by MOLEX Rise time of power supply Time Figure 2 3 Graph of Rise Time of Power Supply CONTEC ECH PCI CE H2C 11 2 Setup Step 2 Setting up the hardware Before you start be sure that the power is turned off Remove only those screws that are explained Do not move any other screw Attaching the Brackets The brackets can be used in two ways as illustrated below ECH PCI CE H2C using the brackets by the appropriate method suitable for the operating environment 1 Use screws to attach the bundled attachment fittings with a screw Do not tighten screws with excess force lt Horizontally placed gt lt Vertically placed gt Figure 2 4 Attaching the Brackets CAUTION Screw holes may be damaged if screws are tightened with a torque greater than the specified torque The specifi
8. Option Expansion Adapter for Express Card Slot Expansion Adapter for PCI Express Slot EAD CE EC EAD CE LPE Check the CONTEC s Web site for more information on these expansion adapters Combinations of Expansion Adapters and Expansion Chassis The expansion adapters and expansion chassis can be used in the following combinations Expansion Expansion chassis ECH PCI CE Expansion Chassis ECH PCI CE H2B i iw gt M ECH PCI CE H7A O xe EAD CE LPE ECH PCI CE H2C ECH PCI CE F2B g A ECH PCI CE H4A ECH PCI CE H13A Expansion Adapter K a EAD CE EC Accessory Option AC adapter PCI Express Cable 1m PCI Express Cable 3m Fan 41x12 Need for connect to CX100n BX100n ECH PCI CE H4B ECH PCI CE F4B min gt IPC ACAP12 04 CB CE 1 CB CE 3 FANO412 CONTEC ECH PCI CE H2C 1 Before Using the Product Restrictions This product is used in a combination with the optional expansion adapter The following restrictions apply to the situation when the expansion adapter is connected to the expansion chassis This product has restrictions on the types of PCs and boards that can be used Be sure to check the following restrictions before use lt Restrictions of PC gt This product uses the PCI to PCI Bridge to extend the bus The PCI boards plugged in PCI slots in this product are recognized if the PCI to PCI bridge is recognized by the BIOS in
9. PC HELPER PCI Bus Expansion Chassis Short size 2 Slots BLACK ECH PCI CE H2C User s Manual CONTEC CO LTD Check Your Package Thank you for purchasing the CONTEC product The product consists of the items listed below Check with the following list that your package is complete If you discover damaged or missing items contact your retailer Product Configuration List Expansion chassis 1 Power connector 1 ECH PCI CE H2C This User s Manual this booklet 1 Contact 4 Slot cover 1 Rubber feet 4 Bracket 2 Bracket fixed screw 8 Body fixed screw 4 Board fixed screw 2 Ls A Board fixed screw K WA 3 Power connector L Bracket fixed screw d Slot cover Contact i aL QS Body fixed screw Expansion chassis Bracket Rubber feet User s Manual User s Manual CONTEC ECH PCI CE H2C Copyright Copyright 2011 CONTEC CO LTD ALL RIGHTS RESERVED No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO LTD CONTEC CO LTD makes no commitment to update or keep current the information contained in this document The information in this document is subject to change without notice All relevant issues have been considered in the preparation of this document Should you notice an omission or any questionable item in this document please feel free to notify CONTEC CO LTD Rega
10. The total current consumption must not exceed the power capacity of this product No PCI board on this product is detected f Make sure that the expansion adapter has been installed correctly g Make sure that the connection cable has been installed correctly When connecting the connection cable to the main chassis insert the connector until it clicks into place h Make sure that the POWER LED on this product is turned on The photo is of the EAD CE EC ECH PCI CE H2C IPC ACAP12 04 CONTEC 22 ECH PCI CE H2C 3 About Hardware Hardware specification Table 3 1 Specification Item ECH PCI CE H2C Compatible bus PCI Local Bus Specification Rev2 3 5Vtype Address space 32bit memory address I O address Interrupt level INTA INTD Bus operating clock 33MHz Max Number of user available 2 slots slots short size Acceptable board sizes mm 176 5 L x 107 H Power supply Expansion slot supplied 5A Max power 2A Max The output current 1A Max must not exceed the 0 3A Max value on the right Maximum total power 48W capacity Rated input voltage 12 24VDC Range of input voltage 10 8 31 2VDC ean a Outside dimensions mm 270 0 W x 182 0 H x 50 0 L without rubber feet Outside dimensions of acceptable board Max lt ECH PCI CE H2C gt 3 About Hardware 176 5 L g mm CONTEC ECH PCI CE H2C 23 3 About Hardware Table 3 2 Environmental spe
11. cification Item Specification Operating temperature 0 50 C Operating humidity Storage temperature Storage humidity Floating dust particles Corrosive gases Line noise AC line 2kV Signal line 1kV IEC61000 4 4 Level 3 EN61000 4 4 Level 3 Line noise Static electricity registance resistance 1 Atmospheric discharge 4kV IEC61000 4 2 Level 2 EN61000 4 2 Level 2 Vibration Sweep 10 57Hz semi amplitude 0 075 mm 57 150Hz 1 0G resistance resistance 1 40 min each in x y and z directions JIS C60068 2 6 compliant IEC60068 2 6 compliant Impact resistance 10G half sine shock for 11 ms in x y and z directions JIS C60068 2 27 compliant IEC60068 2 27 compliant Class D grounding previous class 3 grounding SG FG continuity 1 It is provided with PCI Express External Cabling Specification CAUTION If you use this product in a noisy environment the ferrite core must be installed in the PCI Express cable at a position near the main body of this product side connector and in the AC cable at a position near the plug of AC Adapter For the type of ferrite core refer to the following table Equivalent types are also available Name Maker Turn FRC2009A 6 or E04SR200935A_ CONTEC or SEIWA 1 2 When attaching a ferrite core to the cable coil it around 0 1 times near the connector while leaving it open and then close it PCI Express cable Turn 1 x 2pcs AC
12. due to such defect or consequences that arise from Safety Precautions Understand the following definitions and precautions to use the product safely CONTEC 4 ECH PCI CE H2C 1 Before Using the Product Safety Precautions Understand the following definitions and precautions to use the product safely Safety Information This document provides safety information using the following symbols to prevent accidents resulting in injury or death and the destruction of equipment and resources Understand the meanings of these labels to operate the equipment safely AN DANGER DANGER indicates an imminently hazardous situation which if not avoided will result in death or serious injury Ax WARNING WARNING indicates a potentially hazardous situation which if not avoided could result in death or serious injury Ay CAUTION CAUTION indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury or in property damage Handling Precautions JW DANGER Do not use the product where it is exposed to flammable or corrosive gas Doing so may result in an explosion fire electric shock or failure CAUTION Do not plug or unplug any board into or from an expansion slot with the PC or this product powered Doing so may result in a malfunction overheating or fault Be sure to turn off the PC or this product and unplug their power cables before plugging or unplugging
13. ed tightening torque is 5 6kgf cm Attaching the FG 1 Use screws to attach the FG Figure 2 5 Attaching the FG CONTEC 12 ECH PCI CE H2C 2 Setup Attaching the Fan Option Refer to the user s manual for the cooler fan FAN0412 to install its brackets to the expansion chassis Figure 2 6 Attaching the Fan Option CN2 specification Table 2 1 Power Connector CN2 for Cooler Fan 5045 02A mfd by ALEX Pin No Signal name 1 12V 2 GND Equivalent types are also available Applicable connector on the connector side Housing 50802 8100 mfd by MOLEX Contact 51191 0200 mfd by MOLEX Equivalent types are also available CONTEC ECH PCI CE H2C 13 2 Setup Installation Orientation ECH PCI CE H2C lt Vertically placed gt lt Horizontally placed gt il SeH ki ommo F o o Figure 2 7 Installation Orientation lt ECH PCI CE H2C gt ECH PCI CE H2C CX100n lt Horizontally placed gt Figure 2 8 Installation Orientation lt KCH PCI CE H2C CxX100n gt 14 CONTEC ECH PCI CE H2C 2 Setup Step 3 Installing the Expansion Board A CAUTION Before installing an expansion board on this product be sure to turn off your PC or this product and
14. ety Information asies A EE EAS AEEA E EE 5 Handling Precautions sccsc sivcsscscsssssesesscavsnseds cateatecaveune sodsestavasaabsesesesssacsuseetuntasaatesavaaseia EKIA EEEIEE TSERE 5 BA VITONMEN ar ERE AEE EE A EEE ER EE bested 7 TSP CUA OM is iie2 sak biSs even eiie eenen E VEEE E vances canessaveausd E E a 7 EON g Kt PAE A S 7 Disposal Yvain EE A EA E AEEA E TE E TRA 7 2 SETUP 9 What is Setup roi icccdcsascaravceceocacanecivetereccenespvsavernceresaeianeovassecevencauseavonaiaveeuesausevanucsreuerpveateumenaranateeveratets 9 Step 1 Preparation iseitis ieoor itake e ASAS EEEE PEATEELE ANOTE SEAVER EEEE IAE OEE E ASEE IEPENET EEE RERE 10 tems to Despre pared x eain aE E R AEE EE EAEE TEE EE 10 Names of major parts wT DC Power Input Connector DGIN swiss sccsisssscescccssanevessceaenscasassssssecesaacvsevevseznensesavsansseasecasnscesaseadesa 11 Step 2 Setting up the hardwares iin a E E EREE EEA RAR 12 Attaching the Brackets Sensen oina enri eaaeo EEn SENAO ESEESE TEANN EESE AEA EAEE NER 12 Attaching the FG ivssivssssccsasccsssctesszcesssievsacnvacauessccaveandisdseisnsctsassasaseessaceuuacsesdanaessiavianivacaeadisnsestedee 12 Attaching the Fan Option zieni iaren EEEE E E R AE RA 13 Installation Orientador sire eere ea rE E E E e 14 Step 3 Installing the Expansion Board eonan iian riea AE A R NE AIVE ENTAR 15 Step 4 Connecting the Cables eeii i ii iE E EE EEE EEE 16 Connecting the connection cable to the Expansion Adapter
15. ference at his own expense WARNING TO USER Change or modifications not expressly approved the manufacturer can void the user s authority to operate this equipment CONTEC 6 ECH PCI CE H2C Environment Use this product in the following environment may overheat malfunction or cause a failure Operating temperature 0 50 C Humidity 20 80 RH No condensation Corrosive gases None Floating dust particles Not to be excessive Inspection Inspect the product periodically as follows to use it safely Fetefetetetalatetetefeteteletefetatalsfstetetetetey D00000 Fefefetetetelstetelefetetelstehetatelefsteteletetey Degoosse0ogoo0s00R0R0R0R mm a WN i f s a Storage When storing this product keep it in its original packing form 1 Wrap it in the packing material and then put it in the box Ventilating slits must neither be blocked nor have dust or foreign matters adhering 1 Before Using the Product If used in an unauthorized environment the chassis 2 Store the package at room temperature at a place free from direct sunlight moisture shock vibration magnetism and static electricity Disposal When disposing of the product follow the disposal procedures stipulated under the relevant laws and municipal ordinances CONTEC ECH PCI CE H2C 1 Before Using the P
16. g the product About the Chassis This product is an expansion chassis that adds PCI bus slots toa PC It can add PCI bus slots by connecting an optional expansion adapter EAD CE LPE EAD CE EC The board that can be mounted is short type 176 5 L x 107 H mm PCI boards Features PCI bus 5V 32bit 33MHz slots can be added to your PC Two PCI bus 5V 32bit 33MHz slots can be added ECH PCI CE H2C adds two PCI bus slots This expansion chassis is connected to a PC using an optional expansion adapter Short type PCI bus boards can be connected ECH PCI CE H2C You can connect two short type 176 5 L x 107 H mm PCI boards ECH PCI CE H2C can be connected two PCI Boards The best case size design matched to CX100n and the BX100n series The design is not ruined by designing the case size matched to CX100n and the BX100n series The cTEST controller realizes further Extensions Be accessible in cTEST controller CX100n or BOX computer BX100n and cable assembly Can use it in unification and separate by installing attached insulator bracket A wide range of power supplies 10 8 31 2VDC supported As the product supports a wide range of power 10 8 31 2VDC it can be used in a variety of power environments The cooler fan can be installed according to the usage The cooler fan can be installed according to the usage CONTEC ECH PCI CE H2C 1 1 Before Using the Product Expansion adapter
17. gnetic field or noise Doing so may result in a malfunction overheating fault or damage in the chassis your PC or both It is very dangerous to use the chassis with water liquid or metal conductive chips left inside Be careful not to let such foreign matters in the chassis The specifications of this product are subject to change without notice for enhancement or quality improvement Even when using the product continuously be sure to read the manual and understand the contents Do not modify this product CONTEC will bear no responsibility for any problems etc resulting from modifying the product Regardless of the foregoing statements CONTEC is not liable for any damages whatsoever including damages for loss of business profits arising out of the use of or inability to use this CONTEC product or the information contained herein FCC PART 15 Class A Notice NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful inter
18. n this product is on 4 The power supply of a PC is turned ON Turning off the system 1 The power supply of a PC is turned OFF 2 Pull the AC power cable out of the wall power outlet 3 Pull out the AC power cable from AC adaptor 4 Pull out the Power connector from chassis CAUTION Do not turn on or off this product with the PC main unit powered Doing so cancels the detection of the bus adapter When turning this product on back restart the PC main unit CONTEC 18 ECH PCI CE H2C 2 Setup Setting up the hardware in Windows At startup of Windows the PCI to PCI Bridge used by this product are detected in sequence and identified automatically by the Windows standard driver After that the PCI boards installed on this product are detected in sequence For setting up and checking the boards used on the expansion chassis refer to their respective manuals Checking the hardware in Windows You can use Device Manager to check whether this product has been identified in Windows Device Manager shows PCI standard PCI to PCI bridge under System devices 4 Device Manager Bie Action yew tep gt Rf amp 2 3 384 Sete dences S ACPI Fixed Feature Button ig amono ace utery WY Drect memory access controler Wy rtekR 82801 PCI Bridge 244E Inte AAOAG ICH Family PCT Express Root Port 2700 3 IrkeK BZBOLG ICH Faiy PCL Express Root Port 2704 Ag Tree AZBOEG ICH Famty
19. rdless of the foregoing statement CONTEC assumes no responsibility for any errors that may appear in this document or for results obtained by the user as a result of using this product Trademarks MS Microsoft Windows and Windows NT are trademarks of Microsoft Corporation Other brand and product names are trademarks of their respective holder CONTEC ii ECH PCI CE H2C Table of Contents Check Your Package Copy right cicsaivescssizceedacd cosas stccucicistceeseataxectciadcessast eawsvctadehsasicascieus cs ssi taaeetansasevsaabuanndabeeeevastenetaieiiaestaaets ii Trademarks yir tise ewensteuuh Metall AE aici E EENE ENE EENE ii Table of CONEIS r ta E AA RA E A E iii 1 BEFORE USING THE PRODUCT 1 AbOut the Chassis ireen ot E EEA EE ER EE R a 1 Features Expansion adapter OpPtiOn sirensis asert siraan EE ATUPE SELA EEA AEE EETA 2 Combinations of Expansion Adapters and Expansion Chassis sccscscessseseeeeteeseeeeeseeseeeeneeeeee 2 Accessory OPtiOn eeir enteen a E TEE EEVEE E 2 R stricHon Sirine nan anar E A A ETRE A AER 3 C st met SUPPOTts csssssoviversesceaesnsosersdcnacacosnovsetconsceneanahsietsntcascstounevessndenaoausnsenvededcestessevdssressesasssodvadercens 4 WED Site des Bie ieee SE SEG E CONES ROY Sl aa rece ein Allee Salers 4 Limited One Yar Warranty serin niara a ARTEEN A EE AN OT 4 How to Obtain Service Liability Safety Precautions sonrie Teti ore ra ATS ras aE EES E EEE E a a aa 5 Saf
20. roduct CONTEC 8 ECH PCI CE H2C 2 Setup 2 Setup This chapter explains how to set up the chassis Refer to the user s manual for the expansion adapter EAD CE LPE EAD CE EC as required What is Setup Setup means a series of steps to take before the product can be used Taking the following steps in this chapter sets up the ECH PCI CE H2B Step 1 Preparation Step 2 Setup the Hardware Step 3 Installing the Expansion Board Step 4 Connecting the Cable Step 5 Installing the expansion adapter board Step 6 Setup and Check If setup fails to be performed correctly refer to Setup Troubleshooting CONTEC ECH PCI CE H2C 9 2 Setup Step 1 Preparation Configuration image The photo is of the EAD CE EC ECH PCI CE H2C Figure 2 1 Configuration image Items to be prepared PC Expansion adapter Expansion adapter card a Connection Cable b Expansion chassis This product Chassis c Picture is ECH PCI CE H2C AC adapter d PCI board to be installed c d b a CONTEC 10 ECH PCI CE H2C 2 Setup Names of major parts ECH PCI CE H2B F2B Front view Back view PURT MOON _ Slot cover x 1 _ Cooler fan installation hole Power connector FG I Connecting Ppwer Ka Connection cable LED Teet Connecting 2 Terminal il Figure 2 2 Names of major parts lt ECH PCI CE H
21. s vicinity CAUTION When using this chassis connected with CX100n keep it at least 20mm away from any object such as the wall for cooling purposes Attaching rubber feet to the chassis makes it 3 6mm taller ECH PCI CE H2C connected with CX100n 100mm or more 100mm or more o 100mm or more oo 100mm or more Figure 2 16 Distances between this product and its vicinity lt ECH PCI CE H2C CX100n gt CAUTION Do not install this product into the fully sealed space except the case in which the internal temperature is adjustable by equipment such as air conditioner Troubles such as operational malfunctions could be occurred by the temperature increase caused by long term usage CONTEC ECH PCI CE H2C 21 2 Setup Setup Troubleshooting Please confirm followings when the ECH PCI CE H2C does not work Symptoms and Actions The chassis won t be turned on a Make sure that the Power connector has been connected correctly b Make sure that the AC power cable has been connected correctly c Make sure that the power supplies of the PC or this product are on d Make sure that you have followed the procedure in Chapter 2 e Even though the chassis is still not turned on check whether it is turned on with no board installed Tf the chassis is turned on with no board installed check the total current consumption by the installed boards
22. sis keep it at least 20mm away from any object such as the wall for cooling purposes CONTEC ECH PCI CE H2C 26 ECH PCI CE H2C User s Manual CONTEC CO LTD September 2011 Edition 3 9 31 Himesato Nishiyodogawa ku Osaka 555 0025 Japan Japanese http www contec co jp English http www contec com Chinese _ http www contec com cn No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO LTD 09062011 06082011 Management No NAO1138 0906201 1_rev3 Parts No LYME533
23. the PC used Ask the PC vendor for whether the BIOS recognizes the PCI to PCI bridge lt Restrictions on transfer rate gt When the expansion chassis accommodates a board that performs high speed transfer such as bus mastering the overall transfer rate may be lower than that of PCI bus slots in the main unit of a desktop PC This is caused by bus extension by the PCI to PCI Bridge The transfer rate may vary with the system configuration and the type of the PC lt Restrictions of PCI board gt None of the following boards can be plugged into any expansion slot in this product Video display board VGA board Board to connect a PCI bus expansion chassis Board explicitly stated not to be used with the PCI to PCI Bridge Some boards even PCI compliant ones may not work depending on their specifications CONTEC ECH PCI CE H2C 3 1 Before Using the Product Customer Support CONTEC provides the following support services for you to use CONTEC products more efficiently and comfortably Web Site Japanese _http www contec co jp English http www contec com Chinese http www contec com cn Latest product information CONTEC provides up to date information on products CONTEC also provides product manuals and various technical documents in the PDF Free download You can download updated driver software and differential files as well as sample programs available in several languages Note For prod
24. uct information Contact your retailer if you have any technical question about a CONTEC product or need its price delivery time or estimate information Limited One Year Warranty CONTEC products are warranted by CONTEC CO LTD to be free from defects in material and workmanship for up to one year from the date of purchase by the original purchaser Repair will be free of charge only when this device is returned freight prepaid with a copy of the original invoice and a Return Merchandise Authorization to the distributor or the CONTEC group office from which it was purchased This warranty is not applicable for scratches or normal wear but only for the electronic circuitry and original products The warranty is not applicable if the device has been tampered with or damaged through abuse mistreatment neglect or unreasonable use or if the original invoice is not included in which case repairs will be considered beyond the warranty policy How to Obtain Service For replacement or repair return the device freight prepaid with a copy of the original invoice Please obtain a Return Merchandise Authorization number RMA from the CONTEC group office where you purchased before returning any product No product will be accepted by CONTEC group without the RMA number Liability The obligation of the warrantor is solely to repair or replace the product In no event will the warrantor be liable for any incidental or consequential damages

ECH-PCI-CE-H2C

Contents

Download Pdf Manuals

Related Search

Related Contents