Home

Navigon 33xx

1. 61 SNOW EE 59 Tuning Mode 61 Troubleshooting ssseeneneneeneneeenn 76 Tuning Mode kk 61 Turn by Turn List leie EE 57 SHOW EE 36 42 56 U WN BIOCK EE 56 V fell TP 50 63 W Ed Tu EN 6 Index
2. The SETTINGS window of the navigation application has several buttons Navigation Route Profile Map Display and General gt Tap ona button to open the corresponding settings window The settings of the individual windows are distributed over several screen pages You can toggle between them with the Ki To the Left and a To the Right buttons Configuring the NAVIGON 33xx 43xx max T3 User s manual NAVIGON 33xx 43xx max Some settings can have only one of two values These settings can be recognised by the Ni Toggle button All possible values are visible The currently valid value is highlighted in white gt Tapon Ni Toggle in order to switch between the possible values Some settings can adopt many different values These settings can be recognised by the List button The current value is visible 1 Tap on kel List A list with all possible values opens The currently valid value is marked 2 Tap onthe value you want It is now marked 3 Tapon OK The list closes The new value is indicated For each setting there is a ES Help button When you tap on it you will see an exact definition of the setting in question You can close the settings windows in two ways gt Tapon OK Any changes you have made will be adopted gt Tap on Cancel Any changes you have made will not be adopted 74 Configuring the NAVIGON 33xx 43xx max Appendix Appendix Technical data
3. 2 Tap on the name of the chapter you want to read The content of the chapter is shown With the Up and ma Down buttons you can scroll up one page and down one page respectively With the Ki To the Left and a To the Right buttons you can open the previous or the next chapter respectively gt Tap on the Table of Contents button in order to open the TABLE OF CONTENTS window gt Tap onthe EZ Close button in order to close the manual The NAVIGATION window is opened Options Some windows offer options that lead to more functions A description of all available options can be found in the chapter Options on page 43 Password Lock You can protect your navigation system from unauthoriised use by creating a password Activating password protection 1 In the NAVIGATION window tap on Options gt Settings gt Options gt Password Lock The NEW PASSWORD window opens 2 Enter a password in the New password box and tap on Next 3 Enter this password again in the Confirm new password box 4 Tap on Activate Password Lock 4 2 4 3 4 4 User s manual NAVIGON 33xx 43xx max Note The password must have exactly 4 digits Changing a password 1 In the NAVIGATION window tap on Options gt Settings gt Options gt Password Lock The ENTER PASSWORD window opens 2 Enter the currently valid password in the Enter password box 3 Tap on Change password The NEW PASSWORD window opens 4 Ent
4. 29 INNearDVy aerae EE 28 SON MD ER E 38 Start Navigation 36 Take Me Home ccnn 35 38 Turn by Turn List 36 Drect HelD iussa cce supo cut m Rd 54 E ENGI GY atouts e dor euet 12 19 Enter Coordinates 27 Entering Ke E EE 21 F avos eicae ae a a 32 37 G GPS Faulty reception 22 Balls v macerata pacco 23 SIGMAl Sa apod dessen enr 13 E lee 18 GPS Sil EEN 55 H Handsfree Module Eed 68 Call in Progress assnneaannneeaeen 70 CONMCGCL EE 65 Connection with Mobile Phone 63 Delete D6eVviC6e eoe rete 66 Dial Number 68 Enter numerals TO HANG UD EE EE 71 Import Phone Book 66 Import recent calls 67 Handsfree Module Incomirig Gall trot oou 68 MUNDO ie ceca Ens Eod incen sn aeaaaee 70 EE 62 PAIRING Hue diac Duo Resta ie p ood 63 PRONG BOOK eoo ort oct eeal 69 Preset neea a MEER 68 71 Recent CAlIS tedio docs acri 69 SENGS ara naiai 71 72 SHOW Na eusian eaii 70 SVIMDOIS eras a e meotes t atei ns 19 Use handsfree 70 Use Mobile Phone 71 Home Address o MERE ERE RERO ERES 39 Home Address 35 38 elei tat EE 7 I Imported Addresses From Outlook 33 From the phone book 34 K Keyboard EE 20 L Last Destnations 33 37 LOG DOOK EE
5. Navigation User s manual NAVIGON 33xx 43xx max The map opens in Preview mode TIFE 22 351 Oe 172 mi 2 39 h MyRoute y Hago 187 mi 2 58 h ZSTUT TGART Ge WE der yh ai i ts 23 28 3 166 mi 3 23 h d 4 Options P P ae H o When the MyRoutes function is activated up to three numbered routes are indicated on the map in different colours orange green blue When the MyRoutes function is deactivated or if you have planned a route with more than one route point only one route is displayed The current position is indicated orange arrow If you display a planned or loaded route and the specified starting point is not your current location then it is possible that your current position will not be shown on the preview A Symbols on the Route Profile button indicate the current settings in the route profile If you tap on this button the ROUTE PROFILE settings window will open The left symbol indicates which speed profile is set in this example car gt The three symbols on the right indicate whether Motorways Toll Roads and Ferries are permitted for calculating the route For each route orange green blue there is a button with the same number and a symbol in the same colour Indicated on each button are the estimated time of arrival the total distance and the estimated duration of the particular route If the MyRoutes function is activated the route corresp
6. The NAVIGON 33xx 43xx max has an integrated TMC receiver The TMC antenna is integrated in the car charger cable Once the car charger cable is connected the device can receive current traffic messages If required it can change your route dynamically e g in order to avoid a traffic jam Memory card NAVIGON 33xx max NAVIGON 4310 max A memory card is not required to operate the navigation system because all the data are stored in the internal memory of the device If you purchase additional navigation maps but no longer have enough space for them in the internal memory of your navigation device it is also possible for you to save these maps on a memory card microSD card The navigation device can use navigation maps from both memories NAVIGON 4350 max ee 2 5 The scope of delivery includes a 2 GB microSD card containing the navigation maps The memory card must be inserted in order to be able to use the navigation application 1 Insert the memory card into the device 2 Press the card into the device until it locks into place Note When you connect the NAVIGON 33xx 43xx max to your computer using a USB cable the internal memory is detected as the NAVIGON drive The slot for the memory card is detected as a removable disc Note Data backups software updates and navigation map updates can be carried out quickly and conveniently with the NAVIGON Fresh software which you can download free of charge from t
7. User s manual NAVIGON 33xx 43xx max English United Kingdom January 2009 The crossed out wheeled bin means that within the European Union the product must be taken to separate collection at the product end of life This applies to your device but also to any enhancements marked with this symbol Do not dispose of these products as unsorted municipal waste Imprint NAVIGON AG Schottm llerstra 5e 20A D 20251 Hamburg The information contained herein may be changed at any time without prior notification Neither this manual nor any parts thereof may be reproduced for any purpose whatsoever without the express written consent of NAVIGON AG nor may they be transmitted in any form either electronically or mechanically including photocopying and recording All technical specifications drawings etc are subject to copyright law 2009 NAVIGON AG All rights reserved User s manual NAVIGON 33xx 43xx max Table of contents 1 Ia d e Tt EE 6 11 ADOUDITIIS un E E EEN 6 Told ein Le e EE 6 e Keele e EE 6 12 WCQ Al NOICE EE 6 FAT ET lt 6 e HESE ET ee ec 6 1 3 Questions about the product ccc ccccceeeeeceeeeeeeeeesseeeesseeeeseeeeesaeeeses 7 2 Before you Bet tee ANEREN 7 2 1 SCOPES OF Belvo reet 7 2 2 Description of the NAVIGON 33xx 43xx man 8 2 3 Important safety Information KEREN 8 2 3 1 Navigation safety information aennnsaenneeeennenennennnrrrrnrnrrnnrrenn 8 2 3 2 Safety information
8. Dimensions Weight Operating conditions CPU Operating temperature Storage temperature Humidity Operating system Display Memory GPS TMC Device keys I O Power supply Rechargeable battery Charging Power pack accessories Car charger cable Flash RAM Keyboard Loudspeaker Microphone Memory card USB Bluetooth Type Running time Electronic Duration Input Output Input Output User s manual NAVIGON 33xx 43xx max 118 8 x 75 5 x 21 5 mm approx 170 g 10 C to 60 C 14 F to 140 F 20 C to 70 C 4 F to 158 F 0 to 90 non precipitating Sirf ATLAS IV ARM 11 500MHz Microsoft Windows CE 6 0 4 3 LCD colour display with resistive touch panel 480 x 272 pixel WQVGA Landscape transmissive NAVIGON 3300 max 1 GB NAVIGON 3310 max 2 GB NAVIGON 4310 max 2 GB NAVIGON 4350 max 2 GB NAVIGON 33xx max 64 MB NAVIGON 4310 max 64 MB NAVIGON 4350 max 128 MB Yes SIRF 3i Built in antenna Yes 1 On Off Software keyboard Yes Yes microSD USB 2 0 Only NAVIGON 4350 max Integrated CSR BlueCore BCOSMM with echo compensation and noise suppression Via USB socket Li lon Li Po 1300 mAh Up to 2 hours Integrated approx 3 4 hours 100 240V alternating current AC 5V 1A direct current DC 10 24V direct current DC 5V 1A direct current DC 75 User s manual NAVIGON 33xx 43xx max 9 2 9 3 10 Identificatio
9. sorted alphabetically If the list is very long Tap on Close List The keyboard appears Enter a number of letters from the destination Tap on Open List The list now contains only those destinations which begin with or contain the letters entered Tap on the name of the destination The DETAILED INFORMATION ABOUT THE DESTINATION window opens Indicated on the Activate MyRoutes button is whether several route suggestions are to be calculated Yes or not No gt Tap on Activate MyRoutes in order to change the setting Sometimes the destination cannot be found exactly because for example several restaurants with the same name exist in the town in question Navigation s User s manual NAVIGON 33xx 43xx max In this case a window opens with all the destinations matching your entry plus additional information gt Tap on the destination to which you want to navigate 7 Tap on Start Navigation Or Tap on Parking in order to search for a car park near your destination The map opens in Preview mode The destination is indicated on the map For detailed information on how to start navigation please refer to chapter Route preview on page 36 Please read on there Direct access to POI ee Navigation The direct access area contains 3 categories of POI Destinations in your vicinity that correspond to one of these categories can be viewed here quickly and without further
10. 61 M Manual ele er EE 6 SVITIDOIS EE 6 Manual 16 Map Destination search 52 Navgaton nnne 48 d ET 46 Reality View 51 Memory ee 13 Index User s manual NAVIGON 33xx 43xx max E E EE 22 E ue EE 20 My Destnatons ees 24 MyRoutesS A 36 43 N Navigation le Ve 55 57 MyRoutes AA 36 43 INO ES oi tiere rdiet 37 43 Route Profile 36 42 e GEN 36 42 Start Navigation 37 Turn by Turn List 36 42 Rote e Tei aic tute vied segue edet ts 56 Navigation Application Seti eri ee ee ao eee REE ee Se ed 23 NAVIGON 33xx 43xx max DES CHD HOME EE 8 Ge LEE 12 FISTANAU ON iii age AE ge 10 Memory Card 13 Scope of Delivery 7 fe S EE 14 UR 13 New Destination 24 O KIEREN 16 22 43 P PIPING etm 63 Password Lock esses 16 Phone see Handsfree Module Phone Book Import Phone Book 66 Refresh aeos a pede dob ue 67 PHONG le 69 POI Rief EN ug DEE 30 Nationwide eene 29 EEN 28 79 User s manual NAVIGON 33xx 43xx max E EE 71 Preview IMC nasere oinaan Eea 58 R Reality View 51 Recalculate Houte 61 Recent Calls Import recent calls 67 Recent Calls 69 Route Planning 39 Route poi
11. Additional information can be found in the manual issued for the headset Tap in the HANDSFREE MODULE window on the e Trusted Devices button The TRUSTED DEVICES window opens Tap on Options gt Search for Devices The navigation device starts the search for Bluetooth devices and lists all the devices it recognises in the DISCOVERED DEVICES window The symbol to the left of the device name indicates whether the device is a mobile phone or a headset Pairing with a device 64 4 P Tap in the DISCOVERED DEVICES window on the Connect button or on the name of the device you want to connect to If pairings already exist with three mobile phones or a headset you will now be prompted to delete a device from the TRUSTED DEVICES list Refer to Deleting a device on page 66 The navigation device prompts you to enter a password If you are setting up a connection to a mobile phone enter a vC password 1 16 digits in the Key box and tap on Ka OK Then enter the same password on the mobile phone If you are setting up a connection to a headset enter the headset password This password and additional information about pairing can be found in the manual issued for the headset The pairing is performed and a connection is set up between the two devices The connected device is indicated in the TRUSTED DEVICES list Green symbol Handsfree Module only NAVIGON 4350 max 7 1 2 User s manual NAVIGON 33xx 43xx
12. Caution Check that the cradle is secured and adjusted properly before each journey The suction cup may become loose after a while Caution After installation check all safety relevant equipment in the Car Caution Connect the car charger cable only to cigarette lighters with an operating voltage of 10 24V Caution Disconnect the car charger cable from the cigarette lighter whenever you park the car The integrated mains adapter always consumes a small amount of energy and could drain the car battery Preparing the NAVIGON 33xx 43xx max for use Installing the navigation system in the vehicle Caution Be sure to refer to all the safety information in chapter Important safety information on page 8 Before you begin User s manual NAVIGON 33xx 43xx max Assembling the cradle F illustration similar Assemble the cradle as shown in the illustration No tools are needed for this Securing the cradle illustration similar 1 Clean the suction cup and that part of the windscreen to which you want to secure the cradle Both must be dry and free of dirt and grease 2 Open the lever on the suction cup as far as possible 3 Place the cradle suction cup against the windscreen 4 Press the lever towards the windscreen Before you begin 11 User s manual NAVIGON 33xx 43xx max Inserting the navigation device into the cradle 1 illustration similar On the back of the NAVIGON 33xx 43xx
13. Detour RH or Ignore a congestion on the route The button shows the active status gt Tap on the button to select the alternative setting Show on Map This button is only available if at least one of the indicated messages concerns your route Tap on this button in order to open the PREVIEW TMC window Refer to Preview TMC on page 58 Showing a single message in detail s Tap on a message to display this information in detail The NAVIGON 4350 max announces the traffic message in question if the detail view is open The announcement of traffic messages is not possible in every language however gt Tap on the E23 Show on Map button in order to view the section concerned on the map TMC Settings 60 gt Inthe Settings window tap on TRAFFIC INFORMATION Navigation User s manual NAVIGON 33xx 43xx max In the TMC SETTINGS window you can set the TMC traffic station and configure whether the reception of a traffic message concerning your route should affect your route planning and if so how Tuning Mode Tap on Tuning Mode and select a method for selecting the TMC radio station Automatic You can use the arrow keys in the station area to select another station The system will search for another station if reception becomes poor gt Hold station You can use the arrow keys in the station area to select another station The system will search for the same station on a different frequen
14. Iilerest aed eoi Deque eet 27 6 2 5 Information about the destination saennnsennnennenennnnnennennenenne 32 6 26 JJES3VOULI TOS mci deat geehrt ot dea Vaio SUPR o a daa 32 6 27 ast DESTINATIONS a onte i retient Seres E ed eve ntis 33 6 2 8 Imported Addresses from Outlook 33 6 2 9 Imported Addresses from the phone book only NAVIGON 4350 MAX EE 34 6 2 10 Navigating le E 35 6 2 11 Selecting destinations on the Map ss sssssssesssrrsesrrrensrrrrsenne 35 6 2 12 Roule DIeVIGW o tepore too rro Reo aree yi idle dues aie iu 36 6 3 Managing destinations EE 37 63 1 Saving Re Te de EE 38 6 3 2 Defining the home address 38 GE St dE Ee e EE 39 6 4 1 Entering the starting pont 39 6 4 2 Entering TOUTS POMS ees dees eed riy rator meas ag aive cos 40 6 4 3 Editing route e Un CN 40 644 Managing ee 41 6 4 5 Calculating and displaying routes 41 6 4 6 Simulating Breif 41 GAY i ROUTE DI CVICW oiii ocio seo organe deg Seege ee 42 Cor OU EE 43 6 6 Working with the TEE Eed 46 6 6 1 Selecting the navigation map 46 6 6 2 Map in Preview mode 46 6 6 3 Map in Navigation mode EE 48 6 64 Realty TEE 51 6 6 5 Map in Destination search mode 52 67 BE ut ie terre 54 6k ING AND E 54 Le e d le EE 54 6 7 3 GPS Status saving the current locaton 55 ET le 55 6 7 5 T fh DysTUFP LIST EE 56 6 7 6 TMC Traffic Information BEE 58 E E boo ee 61 IV Table of contents User s manual User s manual NAVIGON 33xx 43xx max
15. Operating the NAVIGON 33xx 43xx max 19 User s manual NAVIGON 33xx 43xx max E Call in Progress green mobile phone The hands free module of the NAVIGON 4350 max is being used for a phone call Muting The Muting symbol can indicate the following states No symbol The navigation application is not muted CN Muting The navigation application is muted If the device is navigating at the moment you will not hear any driving instructions Note This symbol indicates only the muted state of the navigation instructions It says nothing about the volume of the hands free module 5 2 Software keyboard A software keyboard appears on the screen when text entries are necessary All entries can be made on the software keyboard using your fingertips Only capital letters can be entered When entering town or street names you need not enter any special characters or umlauts The navigation system fills in these characters for you automatically For example if you are looking for the town of Barnau then simply type in the word BARNAU Special characters may be helpful however when naming saved destinations and routes 5 2 1 Special keys inserts a space deletes the character in front of the cursor wl opens the keyboard with numerals Latin Cyrillic and Greek alphabet LE opens the keyboard with the Latin alphabet EN opens the keyboard with the Cyrillic alphabet LE opens the keyboard with the Greek alphab
16. The NAVIGATION window is opened From here you can access all the functions of the navigation application Only NAVIGON 4350 max gt Tapon Phone in order to move the hands free module into the foreground gt Tapon Navigation in order to move the NAVIGATION window back into the foreground For detailed information about the handsfree module refer to the chapter Handsfree Module only NAVIGON 4350 max on page 62 Initialising the GPS receiver Navigation Note Good reception of GPS data requires an unobstructed path from the GPS receiver to the satellites Tunnels narrow thoroughfares between buildings and reflecting house fronts can restrict GPS reception greatly or make it impossible If the GPS receiver or the navigation device is inside a vehicle a metallised windscreen or a windscreen heater can be the cause of poor GPS reception As soon as the navigation device has been switched on initialisation of the GPS receiver will begin 229 User s manual NAVIGON 33xx 43xx max The integrated GPS receiver is not initialised for the first time until the navigation application is started for the first time It can take up to 20 minutes to initialise the GPS receiver for the first time Note If the GPS symbol indicates GPS Ready after far less than 20 minutes it is advisable to leave the navigation device switched on for at least another 15 minutes in order to ensure reliable operation of the receiv
17. are to be seen Indicated in the address box are the coordinates and where applicable the name of the street under the cross hairs When you are driving the map does not change It is always orientated with north at the top P e W k i z TEES i PF A As A A A e EXK n alt FLUGHAFEN BERLIN TEMPELHOF q Options EQ Zoom Out The map section shown becomes larger but you will see fewer details Q Zoom In The map section becomes smaller but you will see more details KW Zoom Mode When this button is active you can mark out a section of the map with the stylus or your finger Mark out the section from upper left to bottom right to zoom in until the section fills the screen Mark out the map section from bottom right to top left to zoom out Pan Mode When this button is active you can change the section of map displayed with the stylus or your finger Simply drag the map in the desired direction 52 Navigation User s manual NAVIGON 33xx 43xx max gt Entire Route Zooms the map so that the entire route is visible m Current Position Selects the section of map displayed so that the current location is at the centre Operating in Destination search mode 1 Tap on the point to which you want to navigate The destination that you have selected appears under the cross hairs The geographical coordinates of the destination and the corresponding addre
18. for the navigation device 9 2 3 3 Safety guidelines when installing the device in your car 10 2 4 Preparing the NAVIGON 33xx 43xx max for use 10 2 4 1 Installing the navigation system in the vehicle 10 242 TMG anteblle secs queer ctu den mds ied EE er Ra Eege 13 ZA Memory Cala canis ados er arcet deae Po Mau ev aret ata e dus 13 2 9 Navigating Witi OP Ormari aea E 13 3 Switching on the NAVIGON 33xx 43xx max 14 OMEN IN cer 16 OMEN ee T Hr 16 XM LC eor d 16 4 1 Activating password Drotechon 16 4 2 Changngapassword eee enne nnns 17 4 3 Cancelling password protection ccccccccsecceceeceeeeeeeseeeeeseeeeeaaeeesaeeens 17 4 4 Forgotten your D ssword eene nennen 17 5 Operating the NAVIGON 33xx 43xx max 17 Dal are ue EE 17 5 2 S0ftware keyboard EE 20 EN MEME E 20 922 Enterlhig deldu EEN 21 SP E ee EE ER MN ue H M HN 22 User s manual Table of contents III User s manual NAVIGON 33xx 43xx max MEN iieri mE 22 6 1 Starting the navigation application sseeseseseeeeeeeeeeee 23 6 2 Specifying a destination EE 24 6 2 1 Specifying the country in which the destination is situated 25 6 2 2 Entering a destination address ssenseseenneeeenrrnnrrrenernreee nne 25 62 3 BEhter Goordlhiales EE 27 624 Points OF
19. impression of the journey The ROUTE PLANNING window is open The starting point and at least one route point have been entered gt Tap on Show Route The map opens in Preview mode The starting point and the route points are marked by flags The distance and the estimated trip time is given for each leg of the route Simulating routes It is also possible simply to simulate navigation on a planned route 44 User s manual NAVIGON 33xx 43xx max Note GPS reception is not necessary for simulation If you have planned a multi leg route only the first leg will be simulated You have calculated and displayed a route gt Tap on Options gt Simulation The route will be recalculated for simulation purposes Simulation starts when calculation has finished Stopping simulation 6 4 7 You can stop simulation at any time gt Tapon NEM Back The ROUTE PLANNING window opens Route preview You have calculated and displayed a route The map is open in Preview mode Route Profile The route is calculated on the basis of a route profile The current settings are indicated by symbols on the Profile button at the top right edge of the map Route If you now want to view or change the route profile tap on Route Profile Note If you change the route profile the changes will also apply to future navigations Information about individual route profile settings can be obtained by tapping
20. max Pairing from the mobile phone Note Please consult the mobile phone s manual if you are uncertain about how to carry out the following steps on the mobile phone 1 Make sure that the Bluetooth function is activated on both the mobile phone and the NAVIGON 4350 max To perform the pairing from the mobile phone the functions Discoverable by Others and Others May Connect must also be activated on the NAVIGON 4350 max 2 Using your mobile phone search for other Bluetooth devices The navigation device is detected as NAVIGON 3 Initiate a connection to the detected NAVIGON device The mobile phone prompts you to enter a password 4 Enter a password 1 16 digits The NAVIGON 4350 max prompts you to enter a password 5 Enter the same password in the Key box as on the mobile phone v and tap on OK The pairing is performed and a connection is set up between the two devices The connected device is indicated in the TRUSTED P DEVICES list Green symbol Se Connected Connecting to a device The word connect describes any subsequent connections between paired Bluetooth devices No further password entry is necessary when connecting Connecting automatically Note For automatic connection to be possible the NAVIGON 4350 max must be saved in the Bluetooth settings on your mobile phone as authorised or authorised device the exact wording can vary from manufacturer to manufacturer For more details refer to your
21. max you will see a circle with two recesses 1 Hang the navigation device by the upper recess on the upper lug of the cradle See illustration 2 hen press it towards the cradle so that it latches in place Supplying power to the navigation device A Included in delivery of the NAVIGON 33xx 43xx max is a car charger cable with which power can be supplied to the navigation device via the vehicle s cigarette lighter gt Connect the car charger cable to the vehicle s cigarette lighter and to the mini USB socket of the navigation device Note Plug the USB connector into the navigation device as far it will go Refer to Troubleshooting on page 76 Caution Connect the car charger cable only to cigarette lighters with an operating voltage of 10 24V The LED on the bottom of the navigation device lights up orange during charging As soon as the battery is fully charged the LED lights up green Note It takes approx 3 4 hours to charge the device when the battery is flat A fully charged battery enables up to 2 hours of use depending on the device configuration Removing the navigation device from the cradle 12 On the bottom of the plate in which you hung the navigation device is a clip Before you begin 2 4 2 2 4 3 User s manual NAVIGON 33xx 43xx max 1 Pull the clip towards yourself so that the device is released from the clip 2 Lift the device up and out of the cradle TMC antenna
22. micro 7 Touch screen Microphone LED Reset Mini USB socket for USB cable car charger cable Slot for microSD memory card On Off Important safety information In your own interest please read the following safety information and warnings carefully before starting up your navigation system Navigation safety information Use the navigation system at your own risk Caution To prevent accidents do not operate the navigation system while driving Caution Do not look at the display unless it is absolutely safe to do so Before you begin N oo N OPPP PP PPE User s manual NAVIGON 33xx 43xx max Caution Traffic regulations have priority over any instructions from the navigation system Caution Follow the instructions of the navigation system only when the circumstances and the road traffic regulations allow you to do so The navigation system will still guide you to your destination even if you deviate from the calculated route Caution Check that the cradle is secured and adjusted properly before each journey Note If you have not understood the spoken instructions or are unsure about what to do next you can refer briefly to the map or schematic view of your navigation system Safety information for the navigation device Caution Protect the device from moisture The device is neither waterproof nor protected against splash water Caution Do not open the case of the navigation d
23. on the related ES Help button Note When you load routes which originate from a different provider than NAVIGON the Route Profile button may be inactive You cannot change the route profile of this route Turn by Turn List s 42 If you want to see detailed directions for the route tap on Options gt Turn by Turn List For details of the functions in the TURN BY TURN LIST window refer to chapter Turn by Turn List on page 56 Navigation User s manual NAVIGON 33xx 43xx max MyRoutes ee When the MyRoutes function is activated the navigation system calculates up to three routes on the basis of the currently selected route profile and shows them on the map in different colours orange green blue and with a number For each route there is a button with the same number and a symbol in the same colour When calculating the time of arrival or the trip time the navigation system takes account of additional factors such as day of the week and time of day The route which corresponds best to the selected route profile is marked with MyRoute Note The MyRoutes function can be used only for routes with only one route point For routes with two or more route points only one route is calculated and displayed regardless of whether you have activated the function or not Note Even when the MyRoutes function is activated sometimes only one additional route or no additional routes at all can be calculated for a
24. opens The most important functions for navigation can be reached via buttons with symbols Other functions are found by tapping on one of the buttons Destination Route Services or General A description of all available options can be found in the chapter Options on page 43 6 6 4 Reality View The map switches to Reality View mode when you approach one of the following points while driving on the motorway NAVIGON 43xx max Reality View PRO gt amotorway junction gt athree leg motorway junction the exit you must take to leave the motorway NAVIGON 33xx max Reality View light the exit you must take to leave the motorway EN FURTH POPPENREUTH FURTH STADTMITTE _ASF 0 6 mi A73 FRANKENSCHNELLWEG _ Options P 21 F RTH POPPENREUTH E 09 44 1 The Reality View mode shows with greater clarity the signposting and lanes you must follow This display does not change until you have passed the spot indicated The map will then change back to Navigation mode If you want to change to Navigation mode before then just tap on any point on the map Navigation 51 User s manual NAVIGON 33xx 43xx max Note The Reality View mode is not available for all motorway junctions and three leg motorway junctions Availability depends on the map material used 6 6 5 Map in Destination search mode The map is always in Destination search mode when a pair of cross hairs
25. refer to the related manual issued by the manufacturer Searching for and pairing Bluetooth devices Pairing is the term used for setting up a coded connection between two Bluetooth devices This requires each of the two devices to send the same password to respectively the other device The password and the connection data are saved on both devices which means that pairing is necessary once only when the connection is set up for the first time Paired devices are saved in the TRUSTED DEVICES list The NAVIGON 4350 max can connect automatically to the last connected device as soon as it is within range The hands free module of the NAVIGON 4350 max can save and manage the connection data of up to three paired mobile phones and one headset From each paired mobile phone it is possible to import the phone book and recent calls and to save this information with the connection data Handsfree Module only NAVIGON 4350 max 63 User s manual NAVIGON 33xx 43xx max Note In this case the phone book and recent calls are only available when the phone in question is connected For details of how to import the phone book and recent calls refer to the chapters Import Phone Book on page 66 and Import recent calls on page 67 Searching for devices 1 Make sure that the Bluetooth function is activated on both the mobile phone and the NAVIGON 4350 max If you want to set up a connection to a headset the headset must be switched on
26. shown what signposts should be followed Possible speed limits may be shown here The route is highlighted in orange When two manoeuvres need to be executed in quick succession the small arrow box indicates the second manoeuvre to be executed The large arrow box shows a diagram of the next junction which you should turn on to The distance remaining to this junction is indicated underneath As you get closer to the junction you will see a spot diagram in addition to the distance Navigation User s manual NAVIGON 33xx 43xx max The nearer you get to the junction the more yellow spots are displayed If you don t have to change direction for a long time you will see only a straight arrow The distance you must continue straight on is indicated underneath the arrow gt Tap on the large arrow box to hear current route instructions The Traffic Information box opens if a reported traffic obstruction affects your route If a distance is indicated in the Traffic Information box no detour route was calculated yet for the traffic obstruction in question gt Tap on the Traffic Information box in order to open the PREVIEW TMC window It shows a map view with the route section affected by the message and a possible detour If no distance is indicated all the obstructions which are reported for your route and would lead to a loss of time will be avoided gt Tap on the Traffic Information box in order to open
27. the TRAFFIC INFORMATION window Refer to Displaying traffic information on page 59 Note The calculation of detour routes to avoid reported traffic obstructions can be performed automatically Refer to TMC Settings on page 60 The Parking box appears when you are near your destination 11 gt Tap on this box in order to select a car park near your destination as your new destination Ahead of many junctions the information from points 9 and 10 is hidden Instead you are shown which lanes lead to your destination gt Tap on the box in order to hide the lane information The height above sea level and the current speed are shown here In the Total box you can see the distance remaining to the destination the estimated duration of the trip and the estimated time of arrival gt Tap on the arrival time if you want to see the estimated driving time instead gt Tap once again on the info box if you want to see the estimated time of arrival Your current position is indicated on the map orange arrow The section of the map displayed changes continually so that your current position is always in view on the map Navigation 49 User s manual NAVIGON 33xx 43xx max 12 If you are navigating a multi leg route you will see the remaining distance to the next interim destination and the estimated time of arrival in the Next box gt Tap on the arrival time if you want to see the estimated driving
28. time instead gt Tap once again on the info box if you want to see the estimated time of arrival 13 The name of the route section that you need to drive onto next is shown in the upper road box The name of the section you are currently driving on is shown in the lower road box Note The displays of many of the above mentioned areas can be configured in Options gt Settings gt Navigation Some displays will only function if the required information is available on the map Note If you tap on the large arrow box the current route instruction will be repeated eo gt Tap on Options gt Route gt Turn by Turn List in order to view a turn by turn list Refer to Turn by Turn List on page 56 gt Tapon Destination search in order to view the map in Destination search mode Refer to Map in Destination search mode on page 52 Volume The volume of the spoken driving instructions can be adjusted during navigation 1 Tapon EN Volume The volume bar opens It contains three buttons for adjusting the volume BM p Louder Quieter Volume on off 2 Tap on EN Volume again or wait a few seconds The volume bar closes Quitting navigation gt Tapon EN Back in order to quit navigation A dialog box will prompt you to confirm 50 Navigation User s manual NAVIGON 33xx 43xx max Map options in Navigation mode gt Tap on Options A window with several buttons
29. used to open the menu Navigation Use the navigation system at your own risk Caution Be sure to refer to all the safety information in chapter Important safety information on page 8 Impaired GPS reception 200 If GPS reception is impaired navigation will be interrupted As soon as GPS reception is restored the navigation system calculates any change of position which has occurred in the meantime You can then simply continue navigating Navigation User s manual NAVIGON 33xx 43xx max Arriving at your destination 6 1 s When you have reached your selected destination a message to this effect will be displayed Only your current position orange arrow will now be shown on the map Starting the navigation application You have switched on the navigation device and if necessary entered the password The following message appears The navigation software on this device is designed to provide route suggestions and does not replace the need for driver attentiveness or the requirement to adhere to road traffic regulations good driving practice and legally posted directions For safety posted road signs and directions should always take precedence over the directions of this unit Do not operate this unit while driving After you have read and fully understood the message tap on OK If you do not accept the content of the message tap on Cancel in order to switch the navigation device off again
30. 7 Handsfree Module only NAVIGON 4350 max 62 7 1 Connection with Mobile Hhone uk 63 7 1 14 Searching for and pairing Bluetooth devices sas11sae11n1a 63 7 1 2 Pairing from the mobile phone 65 7 1 3 Connecting to ele 65 FAA Deleting QS VICE EE 66 7 1 9 Import Phone BOOK eh eene EE Ee 66 T E6 Importtecenr Eelere 67 T EE ae cea UE 68 725 MAKING Re EE 68 7 3 1 Dialling a telephone number 68 7 3 2 Dialling a Speed Call number 68 7 3 3 Calling a contact from the phone book 69 7 3 4 Calling most recently dialled received or missed numbers 69 7 3 5 Transferring a call from your mobile telephone n0nnn0nnnaann 70 TA DURING AICAll gege eseu EE 70 7 4 1 Moving the navigation application to the foreground 70 7 4 2 Entering numbers EE 70 7 4 3 Muting the mcrophone 70 7 4 4 Transferring a call to the mobile ohone ees 71 TAS Ending dee EE 71 der SEH 71 7 5 1 Navigating to a contact from the phone book 71 7 6 Configuring the hands free function eeesesseseeeesseeeeee 71 TN OM NE xl eem E RS 71 TAG 2 OCUN EE 72 8 Configuring the NAVIGON 33xx 43xx max 73 9 APPENA deme 75 97 Ce tee EE 75 9 2 Identification and serial number 76 9 3 Declaration of c nformMily rasene ena na Rem nae E E 76 10 TFoUbIesShoollhg eege 76 EE S S 78 Use
31. AVIGON expressly for the NAVIGON 33xx 43xx max NAVIGON AG accepts no liability for errors or damages resulting from the use of other accessories For suitable accessories go to www navigon com or your authorised dealer Troubleshooting TT User s manual NAVIGON 33xx 43xx max 11 Index B BIOS xi natia ege aps 55 57 Bluetooth Connect iui oie oils tek thes 65 PANNO E 63 C Call Dial Number 68 Phone Tele 69 PICSC E 68 Recent Cales 69 Call in Progress Enter numerals TO e Elte UD rtr o E 71 Ed ln e BEE 70 Show Map 70 Use h ndslree ooa ege TO Use Mobile Phone 71 CONDASS acid os dte oo m s 18 Configuration RE 73 CG OME EE 65 Connection with Mobile Phone 63 Conventions followed in this KEEN 6 Current Position SAVES EE 55 D BIZ Ep E 21 Destination Direct Access 31 Enter Coordinates 27 Favourites eere 32 Erom Maps tp nee 35 From the phone book 71 Home Address a anananananannn 35 38 Imported Addresses From Outlook 33 From the phone book 34 From the phone book 71 Last Destinations 33 78 Destination My Destinations 24 New Destination 24 9 m es core nets 27 uk RE ier pH MERC 30 Nationwide
32. OM THE PHONE BOOK list 1 In the NAVIGATION window tap on My Destinations gt Imported Addresses From the phone book 2 Select the contact you want from the phone book 3 Tapon the address to which you want to navigate The DETAILED INFORMATION ABOUT THE DESTINATION window opens Indicated on the Activate MyRoutes button is whether several route suggestions are to be calculated Yes or not No gt Tap on Activate MyRoutes in order to change the setting 4 Tap on Start Navigation or Navigation 6 2 10 6 2 11 Navigation User s manual NAVIGON 33xx 43xx max Tap on Parking in order to search for a car park near your destination The map opens in Preview mode The destination is indicated on the map For detailed information on how to start navigation please refer to chapter Route preview on page 36 Please read on there Navigating home In NAVIGON 33xx 43xx max you can save an address as your home address You can navigate to your home address at any time by pressing a single button More information about entering your home address can be found in the chapter Defining the home address on page 38 gt Inthe Take Me Home window tap on NAVIGATION If you have not yet entered your home address a dialog box will notify you of this Navigation starts The route profile used for the previous navigation will be applied Selecting destinations on the map You may select a desti
33. ON 33xx 43xx max provides the following lists of destinations and addresses for you to select from gt FAVOURITES All destinations that you have entered in the NAVIGON 33xx 43xx max and then saved gt LAST DESTINATIONS Destinations to which you have navigated on a previous occasion IMPORTED ADDRESSES Here there may be 2 lists to choose from gt FROM OUTLOOK All destinations which you have imported from Microsoft Outlook gt FROMTHE PHONE BOOK Addresses from a mobile phone which is connected via Bluetooth only NAVIGON 4350 max Specifying the country in which the destination is situated At top left in the ADDRESS POI IN A CiTY and POI NATIONWIDE windows you will find the Country button It bears the flag of the country in which you can currently select destinations for the navigation application If your destination is in a different country then proceed as follows 1 Tap the Country button 2 Enter the name of the country in which your destination is situated The button shows the flag of the destination country Note The selection list contains only those countries whose maps are available to the navigation device Entering a destination address 1 Tap in the NAVIGATION window on New Destination Enter an Address If you want to enter an address in a country in which normally the street comes first e g Sweden Norway then the INPUT MODE FOR ADDRESS DATA menu will open 1a Select w
34. ach paired mobile phone in the TRUSTED DEVICES list it is also possible to import its recent calls and save them together with the connection data Access to the recent calls of a mobile phone is then only possible when the NAVIGON 4350 max is connected to the mobile phone from which the recent calls were imported As soon as you Handsfree Module only NAVIGON 4350 max 67 User s manual NAVIGON 33xx 43xx max 7 2 7 3 7 3 1 7 3 2 68 connect to a different phone or disconnect the connection the recent calls will no longer be available on the hands free module 1 Setup aconnection to the mobile phone whose recent calls you want to import See chapter Connecting to a device on page 65 2 Tap in the HANDSFREE MODULE window on the Recent Calls button The recent calls import is started When the import is completed the recent calls are shown Taking a call When you receive a call the INCOMING CALL window will open The name and the number of the caller will be displayed if this information is available If the caller s number is displayed but does not exist in the phone book Unknown caller will be displayed instead of the name If the number is suppressed Phone number hidden will be displayed gt Tap on Accept if you want to take the call The CALL IN PROGRESS window opens gt Tap on Reject if you do not want to take the call Note Navigation instructions are muted during a call Making a cal
35. ant to view your current location on the map In the bottom half of the window you will find the buttons for 4 categories Petrol Station Police Station Hospital Pharmacy gt Tap on the corresponding button Navigation 6 7 3 6 7 4 Navigation User s manual NAVIGON 33xx 43xx max The nearest help point in the selected category will be indicated You are shown the name address phone number if known distance and direction of the help point from your current location You have the following options gt Only NAVIGON 4350 max Tap on the Call button in order to call the number indicated The Call button is not available if no phone number is saved for the help point or if the navigation device has no Bluetooth connection to a mobile phone gt Tap on the Map button in order to see your location and the help point on the map This gives you an overview of the route to the help point Tap on Start Navigation You will then be guided directly to the displayed help point gt You can use the EN Up and ha Down buttons to select other help points in the selected category The help points are sorted by distance from your current position Use the KE Back button to return to the DIRECT HELP window Note Only those help points are displayed which are situated no further than 30 mi from your position GPS Status saving the current location In the GPS STATUS window you will find an overv
36. ave Destination Or Select a destination from the LAST DESTINATIONS list or from the IMPORTED ADDRESSES list refer to Last Destinations on page 33 or Imported Addresses from Outlook on page 33 Do not tap on the Start Navigation button Tap on Options gt Save as Favourite Enter a name for the destination Tap on Save Defining the home address You can always start navigation to your home address very quickly by tapping in the NAVIGATION window on Take Me Home You can define exactly one destination as your home address This destination is saved in the FAVOURITES list Proceed as follows 1 8 Tap in the NAVIGATION window on New Destination gt Enter an Address The ADDRESS window opens Enter your home address Tap on Options gt Save Destination Enter a name for the address For example Home Address Your home address is now saved in the FAVOURITES list Tap on EM Back The NAVIGATION window opens Tap on My Destinations gt Favourites Select from the FAVOURITES list the destination which you want to define as your new home address Refer also to Favourites on page 32 Tap on Options Home Address The selected destination has now been saved as your home address Your home address now appears in the FAVOURITES list marked by a house symbol Navigation User s manual NAVIGON 33xx 43xx max Note The home address is also indicated on the map by a house symbol Chang
37. cy if the signal becomes poor gt Hold frequency You can use the arrow keys in the station area to select another frequency The system will not search for another station if reception becomes poor Recalculate Route Tap on Recalculate Route and select how new traffic messages concerning your route are to be used gt Automatically An alternative route will be calculated automatically The system will inform you on the recalculation gt On Request An announcement from the navigation device tells you that a traffic message concerns your route On the screen the Traffic Information box indicates the distance to the reported traffic obstruction Tap on the Traffic Information box You can then decide whether an alternative route is to be calculated or not 6 7 7 Logbook You can use the NAVIGON 33xx 43xx max to record a logbook The logbook is recorded in the Logbook xls file You can open the file with Microsoft Excel Each recorded trip is added at the bottom of the table as a new entry The first time a trip is recorded the Logbook xls file will be created in the NAVIGON Logbook folder If you delete or move this file a new file will be created when you next record a trip Recording trips You can have all trips recorded automatically 1 in the NAVIGATION window tap on Options gt Settings gt Navigation 2 SetLogbook to Yes 3 Tapon OK Navigation 61 User s manual NAVIGON 33xx 43xx max Eve
38. data of paired devices The device is then no longer shown in the TRUSTED DEVICES list If you imported the phone book or recent calls from this device these data will be deleted from the navigation device 1 In the HANDSFREE MODULE window tap on e Trusted Devices The TRUSTED DEVICES window opens 2 Tap on Options gt Delete Device The DELETE DEVICE window opens 3 Tap onthe BG Delete Device button to the right of the device you want to delete You will be requested to confirm deletion 4 Tap on Yes The device is deleted from the TRUSTED DEVICES list Import Phone Book For each paired mobile phone in the TRUSTED DEVICES list it is also possible to import its phone book and save it together with the connection data Access to the phone book of a mobile phone is then only possible when the NAVIGON 4350 max is connected to the mobile Handsfree Module only NAVIGON 4350 max User s manual NAVIGON 33xx 43xx max phone from which the phone book was imported As soon as you connect to a different phone or disconnect the connection the phone book will no longer be available on the hands free module 1 Setup a connection to the mobile phone whose phone book you want to import See chapter Connecting to a device on page 65 2 Tap in the HANDSFREE MODULE window on the Phone Book button The phone book import is started Depending on the size of the phone book this can take some time When the import is completed
39. e when you enter a location As soon as you enter the first letter the largest city in the given country that begins with this letter appears Enter more letters and after each entry the first city which begins with these letters will appear When the correct location appears tap on OK in order to complete the entry You can open at any time a list containing all the locations which begin with the letters or include the text already entered The more letters you enter the shorter the list becomes Operating the NAVIGON 33xx 43xx max 21 User s manual NAVIGON 33xx 43xx max 5 3 5 4 A gt Tapon Open List to call up this list You can use the EN Up button and the e Down button to move through the list gt Tap onan entry in the list to select it and transfer it to the input box The list closes once an entry has been selected You are now finished with entering the city gt Tapon Close List in order to close the list without selecting an entry Note The list opens automatically as soon as it contains only 5 or less entries Options Some windows offer options that lead to more functions A description of all available options can be found in the chapter Options on page 43 Menus Some buttons have menus which open when activated gt Tap on a menu point to execute its function If you would like to quit the options list without selecting a function tap on the button you
40. e ENTER PASSWORD window opens 2 Enterthe password 3 Tapon OK The NAVIGATION window opens Note When you switch on the NAVIGON 33xx 43xx max for the first time you will be asked to make the following settings gt your preferred language for using for the software p gt the unit of length for distances the time format Note If you have not used the NAVIGON 33xx 43xx max for a long time the battery may be flat In this case the device must first be connected to the car charger cable or to a Suitable charger before it can be switched on Chargers and other accessories are available in the NAVIGON shop at www navigon com or in specialist stores Forgotten your password 14 If you forget your password follow the procedure described in Forgotten your password on page 17 Switching on the NAVIGON 33xx 43xx max User s manual NAVIGON 33xx 43xx max Switching the navigation device to standby mode j gt Press briefly max 1 5 seconds on the On Off key Of 1 E in the NAVIGATION window of the navigation software on the button 2 Tap on Standby Automatic Standby You can configure the NAVIGON 33xx 43xx max so that the navigation device is automatically switched to standby mode gt Inthe NAVIGATION window tap on Options gt Settings gt General gt Automatic Standby gt Select after how much time you want the navigation device to be switched to standby mode Never Aft
41. earch for a car park near your destination Sometimes the destination cannot be found exactly because for example the entered combination of place and street name exists several times In this case a window will open with a list of all the addresses matching your entry plus additional information gt Tap on the address to which you want to navigate If the entered house number is not included on the map the window will show an address with the house number closest to the one entered The map opens in Preview mode The destination is indicated on the map For detailed information on how to start navigation please refer to chapter Route preview on page 36 Please read on there Note It is not necessary to enter all the address details You can tap on Start Navigation before you get that far If you specify the town only the navigation system will calculate a route to the town centre If you specify only the town and street without specifying a house number or cross street the navigation system will calculate the best route to this street Navigation 6 2 3 User s manual NAVIGON 33xx 43xx max Enter Coordinates You can also enter the geographic coordinates of your destination The coordinates can be entered as decimal degrees or in degrees minutes and seconds 1 Tap in the NAVIGATION window on New Destination Enter an Address The ADDRESS window opens Tap in the ADDRESS window on Options E
42. eception 6 3 Navigation If GPS signal reception is not good enough the following message will appear GPS reception is currently not sufficient Navigation starts automatically as soon as GPS reception is OK again You have the following options Wait As soon as GPS reception is good enough for determining your position the route will be recalculated and navigation will begin gt Tap on Cancel The window in which you entered your destination will open again Your destination is saved in the LAST DESTINATIONS list gt Tap on Demo The route will be calculated using the centre of the destination location as starting point Navigation will then be simulated on this route Tap on EN Back in order to terminate the demonstration Note If you selected the destination on the map then the Demo button is not available Managing destinations Every destination you enter and destinations from the LAST DESTINATIONS and IMPORTED ADDRESSES lists can be saved in the FAVOURITES list This makes sense if you frequently navigate to a particular destination Note Favourites are indicated on the map by a small flag with their name 37 User s manual NAVIGON 33xx 43xx max 6 3 1 6 3 2 30 Saving destinations 1 2 3 4 Enter a destination refer to Entering a destination address on page 25 or Points of interest on page 27 Do not tap on the Start Navigation button Tap on Options gt S
43. entry gt Inthe NAVIGATION window tap on Options gt Settings gt General in order to select which categories or sub categories are to be available for direct access Note The categories for the Direct Access function are the same as those available for the POI on Your Route function Refer to Map options in Navigation mode on page 51 Note GPS reception must be good enough for determining your position Check the X GPS Ready symbol to see whether GPS reception is good enough For more details refer to the chapter Initialising the GPS receiver on page 23 1 In the New Destination window tap on NAVIGATION The NEW DESTINATION menu opens In the Direct Access area you are shown the symbols of those POI categories that are available by direct access 2 Tapon the category from which you would like to select a POI A list opens It contains the nearest POIs in the specified category sorted by distance 3 Tap on the name of the destination in order to start navigation to it The map opens in Preview mode The destination is indicated on the map 91 User s manual NAVIGON 33xx 43xx max s 6 2 5 6 2 6 32 For detailed information on how to start navigation please refer to chapter Route preview on page 36 Please read on there Information about the destination For many destinations that you specify there will be further information available stored in the navigation system s database There
44. er Each time you switch on the navigation device after this GPS reception will start within a short time If the navigation device has not been switched on for more than a week it can take up to 10 minutes to re initialise the receiver In the top right hand corner of the display you will see the GPS symbol As soon as data from at least three satellites is received the icon will change to M GPS Ready Note Initialisation takes the least time if you do not start driving until the initialisation has finished For more details about the GPS symbol refer to chapter GPS on page 18 Returning to the Navigation window 6 2 eye The NAVIGATION window opens when the navigation application is started If another window of the navigation application is open tap on EN Back This will return you to the window you came from gt Tapon NM Back repeatedly until the NAVIGATION window is opened Specifying a destination Under New Destination you can enter destinations to which you have not yet navigated or which you have not saved Here you can enter the destination s address or coordinates select a POI or select a destination with the Direct Access function Note The first time that you want to enter a new destination you will be asked to select the country in which your destination is situated Navigation 6 2 1 6 2 2 Navigation User s manual NAVIGON 33xx 43xx max Under My Destinations the NAVIG
45. er 10 mins After 20 mins After 30 mins Select Power Loss in order to switch the device to standby mode when the external power supply is interrupted As soon as the device is connected again to the external power supply it will switch on again automatically Switching off the navigation device gt Press the On Off key and keep it pressed until the device switches off Approx 4 seconds or 1 Tap in the NAVIGATION window of the navigation software on the I Q button 2 Tap on Off Note When you switch the navigation device to standby mode the next time it is switched on it will start very quickly with the window which was active when switched off In standby mode the device still consumes a small amount of energy however The battery may be flat after a few days When you switch off the device it consumes no energy It can then take several months for the battery to become flat Switching the device on again triggers a restart which can take some time approx 30 seconds Your settings and your saved destinations and routes will be retained Switching on the NAVIGON 33xx 43xx max 15 User s manual NAVIGON 33xx 43xx max 3 1 3 2 4 1 16 Manual An excerpt of this manual describing the most important functions of the navigation software is saved on the navigation device To open the manual 1 Tap in the NAVIGATION window on Options Manual The TABLE OF CONTENTS window opens
46. er a password in the New password box and tap on Next 5 Enter this password again in the Confirm new password box 6 Tap on Activate Note The new password must have exactly 4 digits Cancelling password protection 1 In the NAVIGATION window tap on Options gt Settings gt Options gt Password Lock The ENTER PASSWORD window opens 2 Enter the currently valid password in the Enter password box 3 Tap on Deactivate Forgotten your password If you enter the password wrongly three times a window will open with instructions telling you what to do now Follow the instructions on the screen Operating the NAVIGON 33xx 43xx max Information Various information symbols are located at the top of many windows Operating the NAVIGON 33xx 43xx max 17 User s manual NAVIGON 33xx 43xx max GPS tall 7 s The GPS symbol can indicate the following GPS reception states No GPS No symbol The built in GPS receiver is not operational Contact customer service if the problem persists No Signal Data is being received from less than three satellites Position cannot be calculated GPS Ready Data is being received from at least three satellites Position can be calculated For details of the GPS status refer to chapter GPS Status saving the current location on page 55 Compass The Compass symbol indicates in which direction you are currently heading It can indicate the following points of t
47. er of letters from the destination Open List The list now contains only those destinations which begin with or contain the letters entered 5 Tap on the name of the destination The DETAILED INFORMATION ABOUT THE DESTINATION window opens Navigation s User s manual NAVIGON 33xx 43xx max Indicated on the Activate MyRoutes button is whether several route suggestions are to be calculated Yes or not No gt Tap on Activate MyRoutes in order to change the setting Tap on Start Navigation or Tap on Parking in order to search for a car park near your destination The map opens in Preview mode The destination is indicated on the map For detailed information on how to start navigation please refer to chapter Route preview on page 36 Please read on there POI of nationwide significance Navigation POIs of nationwide significance are airports sights national monuments large ports etc This way you can find well known places of interest even if you don t know the name of their location 1 In the NAVIGATION window tap on New Destination Search for POI Nationwide The POI NATIONWIDE window opens Select a category from which you would like to find a POI The Destination list opens It contains the POI from the selected category sorted alphabetically If the list is very long EJ Tap on E Close List The keyboard appears Enter a number of letters from the destinati
48. erent starting point Navigation 2 Tap onthe corresponding button 3 Enter the starting point Refer to the corresponding section of chapter Specifying a destination on page 24 ff 4 Tap on Set Starting Point 39 User s manual NAVIGON 33xx 43xx max The selected starting point will now be displayed next to the 0 button Starting Point Changing the starting point 6 4 2 40 gt Tap on the starting point button 0 The STARTING POINT menu opens You can now enter a different starting point Proceed as described above Entering route points The route points of a route are the destinations that you want to navigate to The flow number for each route point is indicated on a button in front of it 1 Tap on the Add Route Point box The ROUTE POINT menu opens 2 Tap on the button for how you want to enter the destination 3 Enter the route point Refer to the corresponding section of chapter Specifying a destination on page 24 ff 4 Tap on Add The selected route point is now shown next to its flow number Repeat these steps for each destination that you want to add to your route Editing route points Route points can be deleted from a route The order of the route points can be changed as you wish Note The starting point flow number 0 can be neither moved nor deleted However you can make another route point into the starting point gt Tap on the route point that you
49. et When you want to enter addresses names or POls the keyboard with the alphabet for the country in question will open automatically 20 Operating the NAVIGON 33xx 43xx max eo User s manual NAVIGON 33xx 43xx max When you want to save a destination to Favourites or when you enter a POI category or a country the keyboard with the alphabet of the user interface will open automatically You can also switch from the Cyrillic or Greek keyboard to the Latin keyboard Many addresses can then also be entered as transliterations or in the language of the user interface Example The language of the user interface is English You want to navigate to Moscow You have the following options gt Mocksa Cyrillic gt Moskva transliterated gt Moscow English Note Street names and place names can be entered only in the language of the user interface if that is how they exist in the map s database Note The maximum number of keyboards is always 2 Umlauts accents and other letters 5 2 2 Another keyboard with special characters is available for each alphabet EN th Latin spec opens the keyboard with Latin special characters LN opens the keyboard with Cyrillic special characters ain opens the keyboard with Greek special characters As soon as you have entered a special character the letter keyboard reappears Entering data Often you can select an entry from a list This is the case for exampl
50. evice under any circumstances Caution Do not expose the navigation device to extreme heat or cold This may damage the device or impair its function Refer to Technical data on page 75 Caution Never unplug by pulling the cable Doing so could severely damage or destroy the device Note Do not kink the cable Make sure that the cable cannot be damaged by sharp edged objects Note Clean the navigation device only with a damp cloth Note Create a backup of the data in the internal memory of your navigation device This is very easy to do with the NAVIGON Fresh software which can be downloaded free of charge from the website www navigon com 33maxseries or www navigon com 43maxseries Before you begin 9 User s manual NAVIGON 33xx 43xx max pPPPPPPPPP 2 4 2 4 1 gt 10 Safety guidelines when installing the device in your car Caution Fasten the cradle so that the navigation device is easy to see and operate by the driver Make sure that the driver s view of the traffic is not impeded Caution Do not attach the cradle within the working zone of any airbags Caution Do not fasten the cradle too close to the steering wheel or other controls The driver must not be obstructed in operating any car functions Caution When installing the cradle make sure that it will not pose a risk in the event of an accident Caution Do not run cables directly next to safety relevant devices and power supplies
51. g Navigation 6 2 8 Navigation User s manual NAVIGON 33xx 43xx max 3 Tap on Start Navigation or Tap on Parking in order to search for a car park near your destination The map opens in Preview mode The destination is indicated on the map For detailed information on how to start navigation please refer to chapter Route preview on page 36 Please read on there Note Favourites are indicated on the map by a small flag with their name Last Destinations NAVIGON 33xx 43xx max saves the last 12 destinations to which you have navigated in the LAST DESTINATIONS list 1 Tap in the NAVIGATION window on My Destinations gt Last Destinations 2 Tap on the destination to which you want to navigate The DETAILED INFORMATION ABOUT THE DESTINATION window opens Indicated on the Activate MyRoutes button is whether several route suggestions are to be calculated Yes or not No gt Tap on Activate MyRoutes in order to change the setting 3 Tap on Start Navigation Or Tap on Parking in order to search for a car park near your destination The map opens in Preview mode The destination is indicated on the map For detailed information on how to start navigation please refer to chapter Route preview on page 36 Please read on there Imported Addresses from Outlook You can use the NAVIGON Sync software to import into your navigation system the contact addresses which you have saved in Mic
52. g is simulated Skip Route Point Tap this button to omit the next route point This button is active only when at least 2 route points still lie ahead of you Refer to Multi leg routes on page 39 Touchscreen Calibration The touchscreen can be re calibrated if it responds poorly to touch Follow the instructions on the screen Traffic Opens the TRAFFIC INFORMATION window in which pending reports are listed Refer to TMC Traffic Information on page 58 Turn by Turn List Shows detailed directions for the route including all points at which you must turn Refer to Turn by Turn List on page 56 6 6 Working with the map 6 6 1 Selecting the navigation map Each country has its own navigation map Seamless navigation over several maps on one continent is possible however if a continuous route can be calculated with the maps saved on the device Even if maps of countries in other continents are available on the navigation device the NAVIGON 33xx 43xx max can only ever work with the maps of a single continent Tap in the NAVIGATION window on Options Settings Map Display in order to see which maps are currently in use Here you can also select a different continent if the navigation device contains any maps of countries on other continents 6 6 2 Map in Preview mode You have entered a destination and tapped on Start Navigation or You have planned or loaded a route and tapped on Show Route 46 Navigation
53. g opened the map using the Show Map button you can have POls Favourites and traffic information of the current map view shown in a clearly arranged list Note This function is not available if the map was opened in one of the modes Destination search Preview or Reality View 1 Tap on any point on the map The NEARBY list opens It contains POIs Favourites or traffic messages of the current map view 2 Tap onan entry in the list in order to receive detailed information about it You have the following options gt Tap on Interim Destination in order to set the selected point as an interim destination The navigation system will first guide you to this interim destination Afterwards you can continue navigation to your original destination The Interim Destination button is available in navigation mode only gt Tap on Start Navigation in order to navigate to the selected point gt Tap on Cancel in order to close the list again Note The Nearby function is available only if GPS reception is good enough Direct Help If you arrive at the scene of an accident or have an accident yourself it may be necessary to call for emergency aid and to give the answering office your current location Tap on Options Direct Help The DiRECT HELP window opens If GPS reception is good enough the address and the geographic cooordinates of your current location will be indicated i gt Tap on ke Show on Map if you w
54. he compass N NE E SE S SW W NW TMC Traffic Information The NAVIGON 33xx 43xx max has an integrated TMC receiver which provides the navigation system with traffic information updates If necessary it can change your route dynamically for example in order to avoid a traffic jam Note This function is only available if TMC traffic messages are being transmitted in the country in which you are travelling This is not the case in all countries The TMC symbol can display the following TMC reception status THs THE Tuning in red The TMC receiver is operational but cannot find a transmitter that is sending TCM signals There are no active traffic messages Tuning The TMC receiver is operational but cannot find a station that is transmitting TMC signals Traffic messages are active however This can be the case for example when travelling through a tunnel TMC on Standby in grey Traffic messages can be receiverd Note The TMC antenna is integrated in the car charger cable The Tuning symbol may still appear therefore when the car charger cable is not connected to the NAVIGON 33xx 43xx max 18 Operating the NAVIGON 33xx 43xx max User s manual NAVIGON 33xx 43xx max For details of the TMC function refer to chapter TMC Traffic Information on page 58 Energy The Energy symbol can indicate the following states of the integrated battery Ch The device is being supplied by an exte
55. he website www navigon com 33maxseries or www navigon com 43maxseries Navigating with GPS GPS is based on a total of at least 24 satellites orbiting the Earth and continuously transmitting signals of their position and time The GPS receiver receives this data and calculates its own geographical position on the basis of the information transmitted by the various satellites Before you begin 13 User s manual NAVIGON 33xx 43xx max e e Data from at least three satellites is required for positioning with an acceptable degree of accuracy With data from four or more satellites it is possible in addition to determine the position s altitude above sea level Positioning is accurate to within three metres Once the navigation device has determined your position this position can be used as a starting point for calculating a route The map data on your navigation device includes the geographical coordinates of all digitally recorded points of interest streets and places This enables the device to calculate a route between a starting point and a destination Calculation of the current position and its representation on the map take place approximately once every second In other words your current position is always shown on the map Switching on the NAVIGON 33xx 43xx max 1 Press the On Off key and keep it pressed until the device switches on Approx 1 5 seconds If password protection has been activated th
56. hether you would like to enter the street first and then the location Street First or first the location and then the street City First Note The following description is based on City First as the order for entering the address If you don t want to choose each time the order for entering the address information you can select a default setting under Options gt Settings gt General gt Input Mode for Address Data Please note however that the Street First order of entry is not possible for all countries In this case you must enter the location first 295 User s manual NAVIGON 33xx 43xx max 26 The ADDRESS window opens 2 Enter the name or the postal code of the destination town 3 Enter the name of the destination street 4 Enter the house number If you do not know the house number then leave this box empty If you don t know the house number but know the name of a nearby side street then tap on the Cross Street box and enter the name of this street The navigation system will calculate a route to the intersection of the streets you have entered The DETAILED INFORMATION ABOUT THE DESTINATION window opens Indicated on the Activate MyRoutes button is whether several route suggestions are to be calculated Yes or not No gt Tap on Activate MyRoutes in order to change the setting 5 Tap on Start Navigation in order to navigate to the stipulated address or Tap on Parking in order to s
57. iew of the data the navigation system calculates from the GPS signals it receives The GPS status can be accessed from the options button in many windows 1 Tap on Options gt GPS Status The current location can be saved in the FAVOURITES list 1 Tap on Save Position The SAVE DESTINATION AS dialog box opens 2 Enter a name for the destination 3 Tap on Save Block You can block a leg of the route at any time during a navigation i e to re calculate the route in order to avoid the leg e g if you have heard on the radio of a traffic jam affecting this section BIR User s manual NAVIGON 33xx 43xx max Note The block is valid only for the current navigation It no longer exists on a new navigation You are currently in a navigation The map is open in Navigation mode 1 Tap on Options Buttons with various functions will be displayed 2 Tap on Block The BLOCK menu opens It contains buttons with different distance values 3 Select the distance you want to block Note If you are currently driving on a motorway the alternative route will begin at the next exit Indicated on the buttons is the junction up to which the block extends The system recalculates the route The blocked route section will be avoided It is marked on the map in red Unblocking a route section 6 7 5 gt Tap on Options gt Unblock The block will be lifted The system recalculates the route The un blocked route sectio
58. ing the home address 6 4 6 4 1 You can define a different address as the home address at any time Proceed as described above Multi leg routes It is possible to plan routes without GPS reception for example in the comfort of your home Planned routes can be saved for later use This allows you to plan as many routes as you like for example for your holidays 1 In the NAVIGATION window tap on Options The options list opens 2 Tap on the Route Planning option The ROUTE PLANNING window opens Entering the starting point The starting point of a route is the point at which you want to begin your trip This is not necessarily the current location If you are planning a route for your holidays at home you could for example enter your hotel as the starting point The starting point is only important if you want to see a planned route on the map but currently have no GPS reception or if you are not currently at the planned starting point This is why your selected starting point has the flow number O As soon as you start navigation your current location will be used as the starting point for the route calculation The first leg of the route is therefore the journey to the route point with flow number 1 1 Tap on the Specify Starting Point box The STARTING POINT menu opens If you want to enter your current location as the starting point 2 Tap on the Current Position menu item If you want to enter a diff
59. ion button shows the type of traffic messaging listed and how many messages of this type are in the list gt Tap on Traffic Information in order to select the messages you want displayed This mark indicates that the message in question comes from a PremiumTMC provider 59 User s manual NAVIGON 33xx 43xx max 3 10 Here you can see how serious the obstruction is Red The section is blocked by the obstruction This can be the case for example with road blocks Yellow The section is not blocked by the obstruction but there is a threat of considerable delays This can be the case for example with traffic jams or when one of several lanes is blocked off No colour The obstruction is not classified as serious This can be the case for example when slow moving traffic is reported on a very short section when SOS telephones are not working or when parking areas are blocked off Here you can see how far you are from this obstruction If the obstruction does not lie on your route or if a detour route was already calculated for this obstruction then the distance as the crow flies will be shown Here you can see in which state the obstruction lies Note Most radio stations report only traffic obstructions in their own state Here the reported obstruction is displayed as a traffic sign Here the affected road is indicated Here you can see on which section of the road the obstruction lies The navigation system can
60. ions to problems which may arise during use of the NAVIGON 33xx 43xx max This list does not claim to be complete Answers to many other questions can be found on the NAVIGON AG website Refer to Questions about the product on page 7 I have connected the NAVIGON 33xx 43xx max to a computer but it is not detected as a removable disc 76 The USB connector is not fully inserted in the case 1 Unplug the connector The navigation device will carry out a new start Wait for the navigation software to be reloaded 2 Without delay insert the USB connector from the charger into the corresponding socket of the NAVIGON 33xx 43xx max as far as it Troubleshooting User s manual NAVIGON 33xx 43xx max will go Refer to Description of the NAVIGON 33xx 43xx max on page 8 My NAVIGON 33xx 43xx max makes no response any longer the screen is frozen Perform a reset This can be done in two ways Use a thin object to press the Reset key Refer to Description of the NAVIGON 33xx 43xx max on page 8 Or 1 Press the On Off key and keep it pressed until the device switches off Approx 4 seconds The device is now deactivated 2 Press the On Off key and keep it pressed until the device switches on again Approx 1 5 seconds The software will be restarted Your settings and your saved destinations and routes will be retained Note Use only accessories which are recommended by N
61. is for example a telephone number available for many restaurants You can then call the restaurant to reserve a table for example One of the destination entry windows described above is open gt Tap on Options gt Info The DESTINATION INFO window opens It contains all the information about the specified destination that is stored in the navigation system s database gt Tap on Cancel in order to close the DESTINATION INFO window again a gt Tap on ke Show on Map in order to see the destination on the map NAVIGON 4350 max Tap on EN Call in order to call the number indicated Note The Call function is only available when the NAVIGON 4350 max is connected via Bluetooth to a mobile phone For details of how to connect to a mobile phone refer to chapter Connection with Mobile Phone on page 63 Favourites Destinations to which you want to travel often can be saved in the FAVOURITES list In the FAVOURITES list you can save up to 500 destinations Information on how to save a destination can be found in chapter Saving destinations on page 38 Tap in the NAVIGATION window on My Destinations gt Favourites 2 Tap onthe destination to which you want to navigate The DETAILED INFORMATION ABOUT THE DESTINATION window opens Indicated on the Activate MyRoutes button is whether several route suggestions are to be calculated Yes or not No gt Tap on Activate MyRoutes in order to change the settin
62. l With the NAVIGON 4350 max you can make a call in various ways Dialling a telephone number 1 Tap in the HANDSFREE MODULE window on the Keyboard button The TELEPHONE NUMBER window opens 2 Enter the desired telephone number 3 Tap on the Call button Dialling a Speed Call number You can configure 4 Speed Call buttons gt Tap in the HANDSFREE MODULE window on the corresponding Speed Call button Note If no number has been entered for the Speed Call button selected or if no Bluetooth connection has been established to a mobile phone the MODIFY PRESET window will open For more details refer to the chapter Preset on page 71 Handsfree Module only NAVIGON 4350 max 7 3 3 7 3 4 User s manual NAVIGON 33xx 43xx max Calling a contact from the phone book If the NAVIGON 4350 max is connected to a mobile phone whose phone book was already imported you can also dial numbers from the phone book 1 In the HANDSFREE MODULE window tap on Phone Book If the phone book of the connected phone was not yet imported the import will be started now refer to Import Phone Book on page 66 Select from the phone book the contact you want to call Tap on OK The SELECTED PHONE BOOK ENTRY window opens It shows all the phone numbers and addresses which have been saved for the selected contact Tap on the EA Call button alongside the phone number you want to dial Calling most recently dialled received
63. mobile phone manual If the device you want to connect to was the last connected device and the Reconnect Automatically setting is activated the connection will be set up automatically as soon as the device is within range Connecting manually If a Bluetooth connection to a device is active you must disconnect this connection first before you can connect to a different device The Handsfree Module only NAVIGON 4350 max 65 User s manual NAVIGON 33xx 43xx max 66 existing connection is disconnected automatically as soon as the connection to a different device is initiated 1 Make sure that Bluetooth is activated on your navigation device gt If you want to connect to a mobile phone make sure that Bluetooth is activated on the mobile phone and that the Discoverable by Others and Others May Connect functions are also activated If you want to connect to a headset make sure that the headset is switched on 2 Tap onthe SS Trusted Devices button in the HANDSFREE MODULE window The TRUSTED DEVICES window opens A currently connected device is indicated by the green symbol FI Connected 3 Tap in the TRUSTED DEVICES window on the Bech Connect button or on the name of the device you want to connect to If a connection currently exists to a different device the connection will be disconnected The NAVIGON 4350 max connects to the selected device Deleting a device You can delete the connection
64. n and serial number The navigation system comes with various identification labels e g CE label serial number These labels are located on the bottom of the device in the area of the charge pilot lamp LED Declaration of conformity The NAVIGON 33xx 43xx max described in this manual bears the CE label among others Products with the CE marking comply with Radio amp Telecommunication Terminal Equipment Directive R amp TTE 1999 5 ECC the Electromagnetic Compatibility Directive 89 336 ECC and the Low Voltage Directive 73 23 ECC as amended by Directive 93 68 ECC issued by the European Community Commission Compliance with these directives implies conformity with the following European Standards EN 300328 V 1 7 1 EN 300440 V 1 1 2 EN 301489 1 V 1 6 1 EN 301489 3 V 1 4 1 EN 301489 17 V 1 2 1 EN 50371 2002 EN 55022 2006 Class B EN 55024 1998 A1 2001 A2 2003 EN 60950 1 2001 A11 2004 EN 61000 3 2 2006 Class D EN 61000 3 3 1995 A1 2001 A2 2005 EN 61000 4 2 1995 A1 1998 A2 2000 EN 61000 4 3 2002 A1 2002 EN 61000 4 4 2004 EN 61000 4 5 1995 A1 2000 EN 61000 4 6 1996 A1 2000 EN 61000 4 8 1993 A1 2000 EN 61000 4 11 2004 The manufacturer is not liable for modifications made by the user which may alter the device s conformity with the applicable directives and standards nor for the consequences thereof Troubleshooting In this chapter you will find solut
65. n can now be integrated into the calculation Turn by Turn List You can display detailed directions of the calculated route before starting navigation or at any time during navigation This list displays all of the driving instructions in table form The map is open in Preview mode gt Tap on Options gt Turn by Turn List The map is open in Navigation mode or in Reality View mode 56 gt Tap on Options gt Route gt Turn by Turn List The TURN BY TURN LIST window opens Navigation User s manual NAVIGON 33xx 43xx max 3 Take the exit right onto the A3 towards NURNBERG Bear right towards NURNBERG OA 1 At exit number 79 for KRONACH R take the exit right Take the exit right onto the A70 ha towards BAYREUTH 4 Options A 1 Schematic depiction of the next junction where you must make a turn 2 Distance to this junction 3 Route instruction and if available the name of the street into which you must turn 4 Indicates whether you want to drive on the route section in question or not ee Allow The section in question is allowed on the route i Forbid The section in question is not allowed on the route Blocking route sections 1 Tap on the route sections that you do not want to travel on so that the x Eorbid symbol appears next to them 2 Tapon Cc Modify Route The navigation system calculates an alternative route avoiding the route sections selected The new driving instructions a
66. nation directly on the map This is a quick way to select towns streets and POI 1 In the NAVIGATION window tap on Show Map 2 Tapon Destination search The map opens in Destination search mode 3 Tap on the point to which you want to navigate Note For details of how to change the map view so that your destination is easily seen refer to the chapter Map in Destination search mode on page 52 The destination that you have selected appears under the cross hairs The geographical coordinates of the destination and the corresponding address are shown in the bottom third of the screen 4 Tapon Ka OK The DESTINATION ON MAP window opens The detailed address data of the selected destination is displayed in the upper left hand corner 35 User s manual NAVIGON 33xx 43xx max 5 Tap on Take Me There The map opens in Preview mode The destination is indicated on the map For detailed information on how to start navigation please refer to chapter Route preview on page 36 Please read on there 6 2 12 Route preview The map is open in Preview mode The navigation destination is depicted by a small flag For detailed information refer to the chapter Map in Preview mode on page 46 Route Profile The route is calculated on the basis of a route profile The current A settings are indicated by symbols on the Profile button at the top right edge of the map gt If you now want to view or cha
67. nd Night display modes The symbol indicates the current mode Delete All Deletes all destinations in the list LAST DESTINATIONS list or FAVOURITES list depending on where you opened the options The list is then empty A dialog window prompts you to confirm deletion Delete Deletes the selected destination from the LAST DESTINATIONS or FAVOURITES list or the selected route from the SAVED ROUTES list A dialog window prompts you to confirm deletion Direct Help Opens a window in which you can find in quick and uncomplicated manner the addresses and phone numbers of offices in your direct vicinity that can be useful in emergencies Refer to Direct Help on page 54 If the navigation device is connected to a mobile phone you can initiate a call directly from here Only NAVIGON 4350 max Enter Coordinates Opens the ENTER COORDINATES window Here you can enter the geographic coordinates of your destination Refer to Enter Coordinates on page 27 Factory Settings Resets all settings to the as delivered state Routes and saved destinations are deleted The software is re started and behaves as if started for the first time after being purchased Refer to Switching on the NAVIGON 33xx 43xx max on page 14 NAVIGON 4350 max Deletes in addition all the connection data of already paired devices GPS Status Opens the GPS STATUS window Here you can see details regarding GPS reception You can also save the data of your curre
68. nge the route profile tap on Route Profile Route Note If you change the route profile the changes will also apply to future navigations Information about individual route profile settings can be obtained by tapping on the related T Help button Turn by Turn List If you want to see detailed directions for the route tap on Options gt Turn by Turn List For details of the functions in the TURN BY TURN LIST window refer to chapter Turn by Turn List on page 56 MyRoutes When the MyRoutes function is activated the navigation system calculates up to three routes on the basis of the currently selected route profile and shows them on the map in different colours orange green blue and with a number For each route there is a button with the same number and a symbol in the same colour 36 Navigation User s manual NAVIGON 33xx 43xx max When calculating the time of arrival or the trip time the navigation system takes account of additional factors such as day of the week and time of day The route which corresponds best to the selected route profile is marked with MyRoute Note Even when the MyRoutes function is activated sometimes only one additional route or no additional routes at all can be calculated for a particular route No different route is then shown on the button in question Start Navigation gt Tap on the button of the route which you want to use for the navigation No GPS r
69. nt location Refer to GPS Status saving the current location on page 55 Home Address Saves the selected destination as your home address You can then always start navigation to this destination very quickly by tapping in the NAVIGATION window on Take Me Home 44 Navigation User s manual NAVIGON 33xx 43xx max Interim Destination Sets the selected point as interim destination The navigation system will first guide you to this interim destination Afterwards you can continue your original navigation Manual Opens the manual on the navigation device Refer to Manual on page 16 MyReport Opens the MYREPORT window Here you can notify NAVIGON about any changes to traffic monitoring systems and routing MyRoutes Opens the map in Preview mode You are provided with up to three different suggestions as to how you can continue your journey Select one of the routes offered New Route Deletes the starting point and all route points from the ROUTE PLANNING window so that you can plan a new route If necessary save the previously planned route Parking Starts navigation to a car park near the destination Password Lock Opens a window in which the password can be configured Refer to Password Lock on page 16 POI on Your Route Opens a list with POIs lying on your route A destination shown here can be selected as an interim destination and can be navigated to Product Information Here you are shown the versi
70. nter Coordinates The ENTER COORDINATES window opens Entering as a decimal number 3 Enter the degree of latitude Begin the entry with a minus sign if you want to enter a southern degree of latitude Enter the degree of longitude Begin the entry with a minus sign if you want to enter a western degree of longitude Entering with minutes seconds 6 2 4 Navigation 3 Enter the degree of latitude Use the corresponding buttons shown on the keyboard in order to enter the units degrees minutes seconds The N S button alongside the entry box indicates whether it is a northern or southern degree of latitude Tap on the button if you want to change the current setting Enter the degree of longitude Use the corresponding buttons shown on the keyboard in order to enter the units degrees Rm minutes seconds The E W button alongside the entry bo x indicates whether it is an eastern or western degree of longitude Tap on the button if you want to change the current setting Points of interest Points of Interest also called POI Points Of Interest for short are useful addresses that are catalogued according to particular criteria POls include ports airports restaurants hotels petrol stations public buildings doctor s surgeries hospitals shopping centres etc 27 User s manual NAVIGON 33xx 43xx max Points of interest can be di
71. nts PAG ceca dase los PC ENS 40 IBI i aaa EA 41 EE e 40 Starting POI EEN 40 Route Profile 36 42 Routes MAN Le EE 41 Panning eter MN SNNT CHE 39 Route points 40 Route Profile 42 EE 41 DOW iistentor ae a ag EX RO RES 41 ll de EE 41 Start Navigation 42 Slat G POU EEN 39 Turn by Turn List 42 S Safety information 8 scope of Delivery 7 Oel VIGOR eege 7 Settings Configuration ssse 73 Handsfree Module 72 iei 50 Settings Handsfree Module Connection with Mobile Phone 63 Delete Device 66 Proce eon 71 80 Simulation FEU tials EEN 42 Start EE 41 Software keyboard 20 SUD DOM eA ee 7 Symbols used in this manual 6 T Take Me Home 35 38 TMC Preview TMC nmm 58 Recalculate Route 61 SNOW ssn dst ae tose aan HEN 59 SVIbols wees scat eeenavsericssenoeens 18 Tuning Mode 61 TMC Settings Recalculate Route 00iaancnaan 61 HR LEE 60 Traffic Information 60 Tuning Mode 61 Trade marks ose ie tot eec 6 Traffic Information Preview IMC 58 Recalculate Route
72. on Tap on Open List The list now contains only those destinations which begin with or contain the letters entered Tap on the name of the destination The DETAILED INFORMATION ABOUT THE DESTINATION window opens Indicated on the Activate MyRoutes button is whether several route suggestions are to be calculated Yes or not No gt Tap on Activate MyRoutes in order to change the setting Tap on Start Navigation or 29 User s manual NAVIGON 33xx 43xx max s Tap on Parking in order to search for a car park near your destination The map opens in Preview mode The destination is indicated on the map For detailed information on how to start navigation please refer to chapter Route preview on page 36 Please read on there POI in a particular location BEIC POls in a particular location can be useful when navigating in an unfamiliar town 1 In the NAVIGATION window tap on New Destination Search for POI gt in a City The POI IN A CITY window opens Enter the name or the postal code of the destination town Select a category from which you would like to find a POI Categories in which no destinations are available in the selected town cannot be entered If sub categories exist for the category you have selected the Sub Category list opens Select the sub category from which you would like to select a POI The Destination list opens It contains POI from the specified category
73. on numbers and copyright details of the hardware and software Rename Opens a window in which you can change the name for the selected destination or route Route Planning Opens the ROUTE PLANNING window Here you can plan routes manage planned routes and start navigation on a planned route Refer to Multi leg routes on page 39 Route Profile Opens the ROUTE PROFILE window Here you can view the options for route planning and if necessary change them Save as Favourite Saves the selected destination to the FAVOURITES list Refer to Saving destinations on page 38 Save Destination Saves the selected address in the FAVOURITES list Refer to Saving destinations on page 38 Save Position Opens the SAVE DESTINATION AS window Here you can save your current position under a certain name in the FAVOURITES list Navigation 45 User s manual NAVIGON 33xx 43xx max save Route Opens a window in which you can save the planned route under a specific name Refer to Saving routes on page 41 Saved Routes Opens a dialog window into which you can load a saved route Settings Opens the SETTINGS window Here you can configure the navigation system Refer to Configuring the NAVIGON 33xx 43xx max on page 61 Show on Map Shows the selected address on the map Simulation Simulates a navigation on the route indicated This simulation can be performed without GPS reception On multi leg routes only the first le
74. onding best to the selected route profile will be marked with MyRoute As soon as you tap on a button navigation along the route in question will start The destination is marked with a little flag If you display a planned or loaded route the starting point and each route point will be marked with a little flag 47 User s manual NAVIGON 33xx 43xx max 6 6 3 ROD 48 e In the case of a multi leg route the distance and the estimated driving time for each leg are displayed A gt Tap onthe Route Profile button see Figure point 3 in order to view and if necessary change the profile on which the route calculation is based gt To start the navigation tap on the button for the route see Figure point 4 you want to use for the navigation If you display a planned or loaded route the route may be recalculated The starting point for the calculation will now be your current location You will first be guided to the first route point entered gt Tap on Options gt Turn by Turn List to view detailed directions for the route Refer to Turn by Turn List page 56 gt Tapon Destination search in order to view the map in Destination search mode Refer to Map in Destination search mode page 52 Map in Navigation mode After the route was shown in Preview mode navigation was started The map opens in Navigation mode AS F RTH POPPENREUTH 0 8 mi A73 FRANKENSCHNELLWEG Here is
75. or missed numbers Note The RECENT CALLS list contains outgoing incoming and unanswered calls Incoming and unanswered calls can be dialled only if the caller s number was transmitted 1 2 Tap in the HANDSFREE MODULE window on the Recent Calls button If the recent calls on the connected phone were not yet imported the import will be started now refer to Import recent calls on page 67 The RECENT CALLS list opens The entries are sorted chronologically the symbols to the right of the entry indicate the type of call EN Missed calls orange Incoming calls white Outgoing calls Tap on the entry you want Note The RECENT CALLS list is available to the hands free module only for as long as the hands free module is connected to the mobile phone It is updated automatically each time it is opened Handsfree Module only NAVIGON 4350 max 69 User s manual NAVIGON 33xx 43xx max 7 3 5 7 4 7 4 1 7 4 2 7 4 3 70 Transferring a call from your mobile telephone The NAVIGON 4350 max takes calls automatically from the mobile phone as soon as a Bluetooth connection is established between the two devices During a call You are calling using the hands free module The CALL IN PROGRESS window is open Moving the navigation application to the foreground You can move the navigation application to the foreground at any time In this way you can have the map with the navigation inst
76. p onthe Iraffic Information button The PREVIEW TMC window opens It shows a map view with the route section affected by the message If the reported obstruction is likely to involve a considerable loss of time a possible detour will also be shown MUR EIER 38 mi 02 13 h Alternative Route 12 59 amp 43 mi 00 57 h 99 58 Navigation User s manual NAVIGON 33xx 43xx max gt Tap on the button of the route you want to follow or gt Tap on the Details button The TRAFFIC INFORMATION window opens Refer to Displaying traffic information on page 59 Note If you tap on a traffic symbol in the display A in the map view of the PREVIEW TMC a window with detailed information about this message will open Refer to Showing a single message in detail on page 60 Displaying traffic information Navigation Current traffic information is available via the options button in many windows gt Tap in the NAVIGATION window on Options gt Traffic The TRAFFIC INFORMATION window opens You can use the EN Up and na Down buttons to scroll in the list of messages gt Tapon NEM Back in order to close the TRAFFIC INFORMATION window again 12 Traffic Information All traffic information we Seligenstadt gt Aschaffenburg West l Riedener Wald gt Schweinfurt Werneck Schwabach West gt Roth Settings 2 6 D The Traffic Informat
77. particular route No different route is then shown on the button in question Start Navigation gt Tap on the button of the route which you want to use for the navigation No GPS reception 6 5 Navigation If GPS signal reception is not good enough the following message will appear GPS reception is currently not sufficient Navigation starts automatically as soon as GPS reception is OK again You have the following options Wait As soon as GPS reception is good enough for determining your position the route will be recalculated and navigation will begin gt Tap on Cancel The map opens in Preview mode Options Some windows offer options that lead to more functions gt Tap on Options to open the options list gt Tap on the option you would like to use gt If you would like to quit the options list without selecting an option tap on the Options button again 43 User s manual NAVIGON 33xx 43xx max 2D 3D Changes between 2D and 3D mode The symbol indicates the current mode Add to Route Opens the route planning The address specified will be added as a route point Refer to Multi leg routes on page 39 Block Opens a window in which you can block a section of the route lying ahead in order to calculate a route which avoids this section e g if you have heard on the radio of a traffic jam relating to this section Refer to Block on page 55 Day Night Changes between Day a
78. phone book You can also use the address of a contact in the phone book as a destination for the navigation system 1 In the HANDSFREE MODULE window tap on Phone Book 2 Select from the phone book the contact you want to navigate to 3 Tapon OK The SELECTED PHONE BOOK ENTRY window opens It shows up to two addresses and up to four phone numbers which have been saved for the selected contact 4 Tap on the g Start Navigation button alongside the address you want to navigate to You can also select addresses from the phone book in the navigation software to act as destinations For more details refer to the chapter Imported Addresses from the phone book only NAVIGON 4350 max on page 34 Configuring the hands free function The hands free module of the NAVIGON 4350 max contains a number of settings that can be individually configured For information about configuring the settings in this window refer to Configuring the NAVIGON 33xx 43xx max on page 73 Preset The hands free module of the NAVIGON 4350 max contains four Speed Call buttons that can be individually configured 1 Tap in the HANDSFREE MODULE window on Options gt Modify Preset Handsfree Module only NAVIGON 4350 max 71 User s manual NAVIGON 33xx 43xx max The PRESET window opens 2 Tap onthe Edit button to the right of the Speed Call you want to define The MODIFY PRESET window opens Entering a new Speed Call number or edi
79. r registered trademarks of their respective owners All rights reserved except those explicitly granted If the registered trade marks used in this manual are not explicitly identified as such this does not imply that the name is not subject to the rights of a third party Microsoft Outlook Excel and Windows are registered trade marks of the Microsoft Corporation NAVIGON is a registered trade mark of NAVIGON AG Questions about the product You have a question concerning your product Then visit our webseite www navigon com and click on Support There you will find an area with frequently asked questions FAQ Center along with details of how to contact us by phone or e mail Before you begin Scope of Delivery Please check that the contents are complete If anything is missing get in touch immediately with the dealer who sold you the product The purchased product includes the following gt NAVIGON 33xx 43xx max navigation device gt Car cradle in parts refer to Assembling the cradle on page 11 gt Car charger cable 10 24V adapter for the vehicle s cigarette lighter with integrated TMC antenna USB cable gt Leaflet with illustrated installation instructions gt Only NAVIGON 4350 max 2 GB microSD card with navigation maps Before you begin 7 User s manual NAVIGON 33xx 43xx max 2 2 2 3 2 3 1 PP Description of the NAVIGON 33xx 43xx max 7 l 2 3 4 RESET 5 e 6
80. r s manual Table of contents V User s manual NAVIGON 33xx 43xx max 1 Introduction 1 1 About this manual 1 1 1 Conventions For better legibility and clarification the following styles are used in this manual Bold and italics Product names SMALL CAPITALS Window and dialogue box titles Bold Highlighting of important parts in the text Underlined Names of buttons input boxes and other elements on the user interface Underlined and italics Names of control elements on the navigation device 1 1 2 Symbols The following symbols refer to specific passages of text Instructions and tips for operating the software A More detailed information and explanations A Warnings 1 2 1 2 1 1 2 2 Legal notice Liability The software and manual are subject to change without notice NAVIGON AG is not liable for the accuracy of the information contained in this manual or for damages resulting from the use of this manual Suggestions for improvements and information regarding errors are always welcome so that we can supply you with even better products in the future Trade marks All brand and trade marks mentioned in this document and registered by third parties are subject without reservation to copyright law and the proprietary rights of their respective owners All trade marks trade Introduction 1 3 User s manual NAVIGON 33xx 43xx max names and company names used in this document are or may be trade marks o
81. re displayed in the TURN BY TURN LIST window 3 Tapon EN Back in order to close the TURN BY TURN LIST window again Removing blocks and using original routes Section blocks can be removed at any time gt Tap in the TURN BY TURN LIST window on Options gt Calculate Original Route Navigation 5f User s manual NAVIGON 33xx 43xx max 6 7 6 TMC Traffic Information The integrated TMC receiver enables the navigation system to make use of current traffic messaging If necessary it can change your route dynamically for example in order to avoid a traffic jam Note TMC is available free of charge in many European countries PremiumTMC promising a faster and more up to date service is offered exclusively or in addition in some countries at a charge You can subscribe to PremiumTMC services on our website www navigon com Preview TMC If a new traffic message concerning your route arises while navigation is in progress the Traffic Information button will appear at the right edge of the screen Recalculate Route Automatically If you have selected Automatically for the Recalculate Route setting the button will not show a distance The traffic obstruction will be avoided automatically Recalculate Route On Request If you have selected On Request the distance to the reported traffic obstruction will be indicated on the button The button will turn red if the distance is less than 50 km Ka gt Ta
82. rnal power source The battery is fully charged or The battery cannot be charged because its temperature is too high or too low di The device is being supplied by an external power source The battery is being charged d mm The device is being supplied by its internal battery The battery charge is sufficient d ml The device is being supplied by its internal battery The battery charge is low Note Lithium ion batteries are allowed to be charged only in a temperature range between 0 C and 45 C 32 F und 113 F This temperature range may be exceeded behind the windscreen in direct sunshine The device will interrupt the charging automatically as soon as the temperature of the battery lies outside the given range Such interruptions are not indicated in the display The device will be supplied again by the external power source for the duration of the interruption Bluetooth Phone only NAVIGON 4350 max The NAVIGON 4350 max has an integrated Bluetooth hands free module This enables you to use the device as a hands free kit for a mobile phone with Bluetooth capability The Phone symbol can display the following states of the hands free module No Bluetooth No symbol The Bluetooth function is deactivated E Not connected red mobile phone The NAVIGON 4350 max has no Bluetooth connection to another device Connected white mobile phone The NAVIGON 4350 max is connected to a headset or a mobile phone
83. rosoft Outlook on your computer Addresses from Outlook are then found in the IMPORTED ADDRESSES FROM OUTLOOK list E User s manual NAVIGON 33xx 43xx max 6 2 9 34 Note NAVIGON Sync can be downloaded free of charge from www navigon com 33maxseries or www navigon com 43maxseries Contacts which have been saved with several addresses will appear once with each address in the IMPORTED ADDRESSES list 1 Tap in the NAVIGATION window on My Destinations gt Imported Addresses NAVIGON 4350 max In the NAVIGATION window tap on My Destinations gt Imported Addresses gt From Outlook 2 Tap onthe address to which you want to navigate The DETAILED INFORMATION ABOUT THE DESTINATION window opens Indicated on the Activate MyRoutes button is whether several route suggestions are to be calculated Yes or not No gt Tap on Activate MyRoutes in order to change the setting 3 Tap on Start Navigation or Tap on Parking in order to search for a car park near your destination The map opens in Preview mode The destination is indicated on the map For detailed information on how to start navigation please refer to chapter Route preview on page 36 Please read on there Imported Addresses from the phone book only NAVIGON 4350 max The phone book of a mobile phone with which you are connected can be imported into the NAVIGON 4350 max Addresses from the phone book are then found in the IMPORTED ADDRESSES FR
84. ructions in the foreground during a call when the NAVIGON 4350 max is in the process of navigating gt Tap onthe Navigation button While a call is in progress the E Call in Progress symbol is visible in the top right corner of the display gt Tap onthe button Phone in order to open the CALL IN PROGRESS window again Entering numbers You can enter numbers during a call This may be the case for example if a further connection via a telephone system is necessary 1 Tap on Keyboard 2 Enter the desired numbers 3 Tap on KE Back in order to open the CALL IN PROGRESS window Muting the microphone During the call you can mute the microphone so that you can talk to someone without the interlocutor hearing gt Inthe CALL IN PROGRESS window tap on Muting to switch off the microphone The interlocutor is no longer able to hear you The modified icon on the button indicates this gt Tapon Muting to switch the microphone on again Handsfree Module only NAVIGON 4350 max 7 4 4 7 4 5 7 5 T 5 1 7 6 7 6 1 User s manual NAVIGON 33xx 43xx max Transferring a call to the mobile phone gt Tap in the CALL IN PROGRESS window on Options gt Use Mobile Phone You can now continue the call from your mobile phone Ending the call gt Tap in the CALL IN PROGRESS window on the Hang up button in order to end the call Useful functions Navigating to a contact from the
85. ry trip from now on will be recorded until you reset Logbook to No It is possible however to exclude individual trips from the recording Before a trip s If your trips are recorded in the logbook a window for entering the trip s key data is opened before navigation starts You can also decide however not to record the trip in question gt If you don t want to record the trip in question tap on SS Cancel or 1 Enter a name for this entry e g Trip to customerX in the Logbook Entry box 2 Enter the mileage 3 Tap on Reason for the Trip and select a reason for the trip from the list of possibilities Handsfree Module only NAVIGON 4350 max The hands free module supports Bluetooth connections to Bluetooth capable mobile phones and headsets If you have set up a connection to a mobile phone you can use the NAVIGON 4350 max as a hands free module for your mobile phone If you have set up a connection to a Bluetooth headset you will hear the voice instructions from the navigation software via the headset This is useful for example when travelling on a motorcycle All other functions described in this chapter are not available when connected to a headset A compatibility list of all supported mobile phones can be found on our website www navigon com 43maxseries Opening the hands free module 62 s gt Tap in the navigation application on Phone The HANDSFREE MODULE window opens When you star
86. splayed on the map by means of a symbol In the NAVIGATION window tap on Options gt Settings gt Map Display gt Categories Shown in order to select the categories you want to appear on the map POI nearby ee ED POIs nearby are POIs located within a certain radius of your current location This means you can always find the nearest petrol station for example no matter where you are Note GPS reception must be good enough for determining your position Check the A GPS Ready symbol to see whether GPS reception is good enough For more details refer to the chapter Initialising the GPS receiver on page 23 Note The Direct Access section offers 3 categories of POI from the current vicinity which can be searched for quickly and without additional entry For more details refer to the chapter Direct access to POI on page 31 1 Tap in the NAVIGATION window on New Destination gt Search for POI gt Nearby The POI NEARBY window opens 2 Select a category from which you would like to find a POI Categories in which no destinations are available nearby cannot be selected If sub categories exist for the category you have selected the Sub Category list opens 3 Select the sub category from which you would like to select a POI The Destination list opens It contains the nearest POI in the specified category sorted by distance 4 Ifthe list is very long Close List The keyboard appears Enter a numb
87. ss are shown in the bottom third of the screen 2 Tapon v OK 3 Buttons with various functions will be displayed Take Me There Starts navigation to the selected point If you are currently navigating this route navigation will be cancelled MyReport Opens the MYREPORT window Here you can notify NAVIGON about any changes to traffic monitoring systems and routing Interim Destination Sets the selected point as interim destination The navigation system will first guide you to this interim destination Afterwards you can continue your original navigation This function is only active during navigation Add to Route Adds the selected point to the route planning as the last point Navigation will then continue to this point after you have reached the original destination or the other route points Save Opens the SAVE DESTINATION AS window You can enter a name under which the selected point will be saved in the FAVOURITES list Refer to Saving destinations on page 38 Search Nearby Opens the POI NEARBY window Here you can search for destinations near the selected point Refer to POI nearby page 28 Tap on Destination search or on EN Back in order to quit Destination search mode You will be returned to the window from which you started this mode Navigation 53 User s manual NAVIGON 33xx 43xx max 6 7 6 7 1 6 7 2 54 Useful functions Nearby During the navigation or after havin
88. t the Bluetooth application for the first time a window will open in which you can start a search for Bluetooth capable devices gt Tap on Yes if you want to start the search now and set up a connection to your mobile phone or your headset As soon as the Handsfree Module only NAVIGON 4350 max User s manual NAVIGON 33xx 43xx max NAVIGON 4350 max has found your Bluetooth device you can initiate the pairing Refer to Pairing with a device on page 64 gt Tap on No if you want to initiate the connection later See chapter Searching for and pairing Bluetooth devices on page 63 Operating the hands free module 7 1 7 1 1 All functions can be reached from the HANDSFREE MODULE window gt Tapon Navigation in order to move the navigation application into the foreground gt Tapon EN Back in order to close the hands free module and return again to the previously opened window Connection with Mobile Phone For you to be able to use the Bluetooth function of the NAVIGON 4350 max the navigation device must be connected to the Bluetooth device Note Both the NAVIGON 4350 max and the mobile phone must be configured accordingly in order for a Bluetooth connection to be set up between the two devices Headsets are suitably configured at the factory For details of how to configure the NAVIGON 4350 max refer to the chapter Settings on page 72 For details of how to configure the mobile phone or headset
89. the phone book is opened Note It can take come time to import a phone book depending on its size During the import you can move the Bluetooth application into the background in order e g to show the map during navigation Tap in the window opened during the import on the To background button in order to move the navigation application into the foreground Editing and updating a phone book The phone book cannot be edited in the hands free module If you want to change or delete an entry in the phone book you must make the changes on your mobile phone and then update the phone book on the hands free module The phone book is re imported for the update 1 Setup a connection to the mobile phone whose phone book you want to update See chapter Connecting to a device on page 65 2 Tap in the HANDSFREE MODULE window on the Phone Book button The phone book of the connected phone is opened 3 Tap on Options gt Refresh The phone book import is started Note Deleting the complete phone book is possible only by deleting the mobile phone from the TRUSTED DEVICES list Refer to Deleting a device on page 66 In this case all the connection data the phone book and the recent calls are deleted and you will have to repeat the pairing operation in order to set up a connection to the device again For more details about the phone book refer to the chapter Calling a contact from the phone book on page 69 Import recent calls For e
90. ting an existing Speed Call number 3 Tap onthe Ka Modify Preset button 4 Enter the name and the number for the selected Speed Call button or edit the existing name and number 5 Tap on OK Adopting a number from the phone book of the mobile phone 3 Tap onthe From the phone book button This button is deactivated when there is no connection to a mobile phone 4 Enter the name of the contact you want to adopt for the Speed Call 5 Tapon OK The SELECT PHONE NUMBER window opens It shows all the phone numbers saved for the selected contact 6 Tap onthe phone number you want to use for the Speed Call Deleting a Speed Call number 3 Tap onthe it Delete button 4 Confirm that you want to delete the Speed Call number The PRESET window opens again No phone numbers and no name exist any longer for the selected Speed Call button 7 6 2 Settings In the SETTINGS window you can configure the settings for the phone functions of the hands free module of your NAVIGON 4350 max gt Tap in the HANDSFREE MODULE window on Options gt Settings The SETTINGS window opens Volume of the Phone Call The volume of the phone call can be controlled independently of the volume of the navigation application Volume of the Ring Tone The volume of the ring tone can be controlled independently of the volume of the navigation application T2 Handsfree Module only NAVIGON 4350 max User s manual NAVIGON 33xx 43
91. want to edit The context menu contains the following buttons Route Point Up Moves the selected route point further to the front Example route point 2 becomes route point 1 fo a Route Point Down Moves the selected route point further to the back Example route point 2 becomes route point 3 Navigation 6 4 4 User s manual NAVIGON 33xx 43xx max Delete Deletes the selected route point A dialog window prompts you to confirm deletion Managing routes You can save each planned route under a particular name Note Only the start point and route points will be saved not the calculated route When you load a saved route it must be recalculated before navigation can start You can load rename or delete stored routes Saving routes The ROUTE PLANNING window is open You have entered the starting point and at least one route point 1 Tap on Options gt Save Route 2 Enter a name for the route 3 Tap on Save The destination is now saved to the SAVED ROUTES list The dialog window closes Loading routes 6 4 5 6 4 6 Navigation 1 Tap on Options Saved Routes 2 Tap on the route that you want to load 3 Tap on Load Route The ROUTE PLANNING window opens The starting point and the route points of the loaded route have been entered Calculating and displaying routes It is possible to calculate and display a planned route on the map even without GPS reception in order to get an
92. xx max Bluetooth Function Select whether you want to activate the Bluetooth function Yes or No The hands free module cannot connect to a mobile phone or headset if the Bluetooth function is deactivated Discoverable by Others Select whether other Bluetooth capable devices in particular mobile phones should be able to detect the NAVIGON 4350 max Yes or No Others May Connect Select whether other devices should be able to initiate a connection Yes or No Reconnect Automatically Select whether the connection to the last connected phone is to be restored automatically Yes or No as soon it comes within range again Note In order for the last connection to be restored without further questioning the navigation device must be saved in your mobile phone as authorised or authorised device the exact wording can vary from manufacturer to manufacturer Note The Discoverable by Others and Others May Connect settings are effective only when the Bluetooth function is activated ee A Bluetooth connection can be established from the mobile phone only when Yes is selected for both settings 8 Configuring the NAVIGON 33xx 43xx max The SETTINGS window is the starting point for customising the NAVIGON 33xx 43xx max to match your personal preferences Settings can be accessed via the options in the NAVIGATION window and via the options in many windows of the navigation application gt Tap on Options gt Settings

Navigon 33xx

Contents

Download Pdf Manuals

Related Search

Related Contents