GT15 CC-Link IE CONTROLLER NETWORK
Contents
1. 3 PART NAMES The following describes part names and descriptions of the CC Link IE communication unit Indicator LED Description Indicates the operating status of the CC Link IE communication unit L 1 in this section Connector IN side OUT side Connector for connecting a fiber optic cable LF 2 in this section Interface connector Extension connector installed to a front extension unit or the GOT Extension connector Extension connector to which a back extension unit is installed Board fixing screw Screws for fixing the extension interface relay board Mounting screw Mounting screws fixed with a front extension unit or the GOT Rating plate 1 Indicator LED ALED indicates the status of the CC Link IE communication unit and the communication status When the LED is lighted up there are two display formats one for the normal mode and the other for the error mode 1 Normal mode If any communication error occurs in the normal mode specify the error cause by the NETWK unit status display screen of the GOT utility Refer to the User s Manual for the GOT used for details on the NETWK unit status display screen Description The GOT is being reset The unit is in a normal status Not sending data Sending data Not receiving data Receiving data Normal sta2. 33 1 5568 5568 Tel 91 20 2712 3130 South Africa Circuit Breaker Industries Ltd Australia Mitsubishi Electric Australia Pty Ltd Private Bag 2016 ZA 1600 Isando 348 Victoria Road Rydalmere South Africa N S W 2116 Australia Tel 27 11 928 2000 Tel 61 2 9684 7777 MITSUBISHI ELECTRIC CORPORATION HEAD OFFICE TOKYO BUILDING 2 7 3 MARUNOUCHI CHIYODA KU TOKYO 100 8310 JAPAN NAGOYA WORKS 1 14 VADA MINAMI 5 CHOME HIGASHI KU NAGOYA JAPAN When exported from Japan this manual does not require application to the of Economy Trade and Industry for service transaction permissio Specifications subject to change without notice Printed in Japan October 2014
3. factors unpredictable by Mitsubishi damages to products other than Mitsubishi products and to other duties NFor safe use This product has been manufactured as a general purpose part for general industries and has not been designed or manufactured to be incorporated in a device or system used in purposes related to human life Before using the product for special purposes such as nuclear power electric power aerospace medicine or passenger movement vehicles consult with Mitsubishi This product has been manufactured under strict quality control However when installing the product where major accidents or losses could occur if the product fails install appropriate backup or failsafe functions in the system Country Region Sales office Tel Country Region Sales office Tel U S A Mitsubishi Electric Automation Inc Hong Kong Mitsubishi Electric Automation 500 Corporate Woods Parkway Vernon Hong Kong Ltd Hills IL 60061 U S A 10th Floor Manulife Tower 169 Electric Tel 1 847 478 2100 Road North Point Hong Kong Brazil MELCO TEC Rep Com e Assessoria Tel 852 2887 8870 Tecnica Ltda China Mitsubishi Electric Automation Rua Correia Dias 184 China Ltd Edificio Paraiso Trade Center 8 andar 4 F Zhi Fu Plazz No 80 Xin Chang Road Paraiso Sao Paulo SP Brazil Shanghai 200003 China Tel 55 11 5908 8331 Tel 86 21 6120 0808 Germany Mitsubishi Electric Europe B V German Taiwan Setsuyo Enterprise Co Ltd Branch 6F No
4. 105 Wu Kung 3rd Rd Wu Ku Gothaer Strasse 8 D 40880 Ratingen Hsiang Taipei Hsine Taiwan GERMANY Tel 886 2 2299 2499 Tel 49 2102 486 0 Korea Mitsubishi Electric Automation Korea Co Ltd UK Mitsubishi Electric Europe B V UK 1480 6 Gayang dong Gangseo ku Branch Seoul 157 200 Korea Travellers Lane Hatfield Hertfordshire l Tel 82 2 3660 9552 AL10 8XB U K Singapore Mitsubishi Electric Asia Pte Ltd e 1707 307 Alexandra Road 05 01 02 Mitsubishi Tel 44 1707 276100 lexandra Road Italy Mitsubishi Electric Europe B V Italian Electric Building Singapore 159943 Branch Tel 65 6470 2460 Thailand Mitsubishi Electric Automation Thailand Centro Dir Colleoni Pal Perseo Ingr 2 Via Paracelso 12 l 20041 Agrate Brianza Milano Italy Moo 4 Serithai Rd T Kannayao Tel 39 039 60531 Spain Mitsubishi Electric Europe B V Spanish OS 10230 Thalland Branch Carretera de Rubi 76 80 E 08190 Sant Cugat del Valles Co Ltd Bang Chan Industrial Estate No 111 Indonesia P T Autoteknindo Sumber Makmur Muara Karang Selatan Block A Utara No 1 Kav No 11 Kawasan Industri Barcelona Spain Per H gudangan Jakarta Utara 14440 Tel 34 93 565 3131 P O Box 5045 Jakarta 11050 Indonesia France Mitsubishi Electric Europe B V French Tel 62 21 6630833 Branch India Messung Systems Pvt Ltd 25 Boulevard des Bouvets F 92741 Electronic Sadan NO Unit No15 Nanterre Cedex France M L D C Bhosari Pune 411026 India Tel
5. MITSUBISHI GT15 CC Link IE CONTROLLER NETWORK COMMUNICATION UNIT User s Manual GT15 J71GP23 SX Thank you for purchasing the GOT1000 Series Prior to use please read both this manual and detailed manual thoroughly to fully understand the product MODEL GT15 J71GP23 SX U MODEL CODE 1D7M76 IB NA 08004 12 E 1410 MEE GOTicodo eSAFETY PRECAUTIONSe Always read these precautions before using this equipment Before using this product please read this manual and the relevant manuals introduced in this manual carefully and pay full attention to safety to handle the product correctly The precautions given in this manual are concerned with this product In this manual the safety precautions are ranked as WARNING and CAUTION y I Indicates that incorrect handling may cause hazardous I i AXWARNING conditions resulting in death or severe injury I l Indicates that incorrect handling may cause hazardous gt eu i e A d conditions resulting in medium or slight personal I AN CAUTION injury or physical damage l e em o pm em rm rem rm rm em em zem rem rm rm em rem pm em rem rem rm rm mm Note that the AN CAUTION level may lead to a serious accident according to the circumstances Always follow the precautions of both levels because they are important to personal safet
6. en connecting or removing the fiber optic cables to from the unit hold the cable connector securely with the hands 5 Connect the cable connector and unit connector securely until you hear a click sound 6 For connecting or removing the fiber optic cables be sure to shut off all phases of the external power supplies used in the system 7 Please wire IN OUT of the connector for the cable correctly After wiring perform a loop test or station to station test or others to confirm if the setting and wiring of CC Link IE communication unit have been done properly For testing methods refer to the following manual CC Link IE Controller Network Reference Manual Miswiring may cause the following and others Baton passing error No loopback at any stations Failed station that cannot reconnect to the network with reclosing the power 6 WIRING METHOD 1 Connection method Connect fiber optic cables between OUT and IN side connectors as shown below Note that there is no need to connect the cables in the order of station numbers Control station Normal station Normal station n lt 120 Station No 1 Station No 2 Station Mon Power supply module Power supply module CPU module CPU module CC Link IE communication unit Y CC Link IE Controller Network module 2 Connecting fiber optic cable Connection Turn the power off D 1 CC Link IE communication
7. following shows manuals relevant to this product Detailed Manual Manual number Model code GT16 User s Manual Hardware SH 080928ENG Sold separately 1D7MD3 GT15 User s Manual SH 080528ENG Sold separately 1D7M23 GOT1000 Series Connection Manual Mitsubishi Products for GT Works3 Manual name SH 080868ENG 1D7MC2 Sold separately Relevant Manuals For relevant manuals refer to the PDF manuals stored in the DVD ROM for the drawing software used Compliance with the EMC and Low Voltage Directives To configure a system meeting the requirements of the EMC and Low Voltage Directives when incorporating the Mitsubishi GOT EMC and Low Voltage Directives compliant into other machinery or equipment refer to EMC AND LOW VOLTAGE DIRECTIVES of the General Description included with the GOT used The CE mark indicating compliance with the EMC and Low Voltage Directives is printed on the rating plate of the GOT Compliance with the Radio Waves Act South Korea This product complies with the Radio Waves Act South Korea Note the following when using the product in South Korea OWE SSS Ag HIM SIDIEN BOHA LE ASAE OI AS SASHA DECO TENA ASAA ASSE AS SAO 2 SUC The product is for business use Class A and meets the electromagnetic compatibility requirements The seller and the user must note the above point and use the product in a place except for home A 8 Packin
8. g List The following items are included Product Quantity CC Link IE Controller Network communication unit GTIS J7IGP23 SX Mounting screw set 4 screws 4 stickers Extension interface relav board A 9 1 OVERVIEW This manual explains the CC Link IE Controller Network communication unit hereinafter referred to as CC Link IE communication unit The CC Link IE communication unit allows the GOT1000 series to function as a normal station on the CC Link IE Controller Network Refer to the User s Manual for the GOT used for GOT to which this unit can be installed When using the CC Link IE Controller Network connection make the communication setting to perform communication with programmable controllers For details of the CC Link IE Controller Network connection refer to GOT1000 Series Connection Manual 2 SPECIFICATIONS The performance specifications of the CC Link IE communication unit are indicated below The general specifications of the CC Link IE communication unit are the same as those of the GOT For the general specifications of the GOT refer to the User s Manual for the GOT used Item Specification LB 32K points 32768 points 4KB Max link points LW 128K points 131072 points 256KB per network LX 8K points 8192 points 1KB LY 8K points 8192 points 1KB LB 16K points 16384 points 2KB Max link points LW 16K points 16384 points 32KB per statio
9. ink IE communication unit by tightening its mounting screws 4 places with a tightening torgue of 0 36 to 0 48 Nem 6 Fix the CC Link IE communication unit by tightening two board fixing screws with a tightening torque of 0 36 to 0 48 Nem 7 When installing an extension unit on the unit that has been installed remove the connector cover and the stickers When not installing an extension unit on the unit that has been installed in order to avoid receiving electrostatic stick accessory stickers to cover the top of mounting screws 4 places Keep the connector cover fixed Keep the accessory sticker stuck Connector cover Accessory sticker Sticker Accessory sticker Point Remove the screws that fixes the extension interface relay board before removing the unit Above 6 5 PRECAUTIONS FOR WIRING CABLES 1 Wire fiber optic cables described in the following manual CC Link IE Controller Network Reference Manual 2 For connecting fiber optic cables to the unit the bending radius of the cables must be within the specified range For the details check the specifications of the cables to be used 3 When wiring a fiber optic cable do not touch the fiber core of the cable connector or unit connector or let dirt or dust collect on it If oil from the hands dirt or dust should adhere to the core the transmission loss will increase causing a malfunction in the data link 4 Wh
10. is outputs or malfunctions resulting in accidents Laser diodes are used in optical transceivers for the CC Link IE Controller Network The class of these laser diodes is Class 1 A CAUTION e Do not bunch the control wires or communication cables with the main circuit or power wires or lay them close to each other As a guide separate the lines by a distance of at least 100mm 3 94 inches otherwise malfunctions may occur due to noise A 2 INSTALLATION PRECAUTIONS NWARNING Be sure to shut off all phases of the external power supply used by the system before mounting or removing this unit to from the GOT Not doing so can cause a unit failure or malfunction N CAUTION Use this unit in the environment that satisfies the general specifications described in the User s Manual for the GOT used Not doing so can cause an electric shock fire malfunction or product damage or deterioration When installing this unit to the GOT fit it to the connection interface of the GOT and tighten the mounting screws in the specified torque range 0 36 N m to 0 48 Nem with a Phillips head screwdriver No 2 Undertightening can cause a drop failure or malfunction Overtightening can cause a drop failure or malfunction due to screw or unit damage Do not directory touch the conductive part or electronic components of the unit This may cause the unit to fail or malfunction WIRING PRECAUTIONS e Be sure to shut off a
11. ke necessary precautions to ensure that remaining materials from fumigant do not enter our products or treat packaging with methods other than fumigation heat method Additionally disinfect and protect wood from insects before packing products A 5 REVISIONS The manual number is noted at the lower right of the top cover Print Date Manual Number Revision Jan 2008 IB NA 0800412 A First edition Jan 2009 IB NA 0800412 B Patial addition Chapter 1 2 4 7 Jun 2009 IB NA 0800412 C Partial corrections Compliance with the EMC and Low Voltage Directives Jun 2011 IB NA 0800412 D Partial corrections Chapter 7 Patial addition Compliance with the Radio Waves Act South Korea Oct 2014 IB NA 0800412 E Partial corrections SAFETY PRECAUTIONS Chapter 4 7 This manual confers no industrial property rights or any rights of any other kind nor does it confer any patent licenses Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial property rights which may occur as a result of using the contents noted in this manual 2008 MITSUBISHI ELECTRIC CORPORATION A 6 CONTENTS 1 OVERVIEW 2 SPECIFICATIONS 3 PART NAMES eee 4 INSTALLATION PROCEDURE 5 PRECAUTIONS FOR WIRING CABLES 6 WIRING METHOD 7 EXTERNAL DIMENSIONS A 7 Manuals The
12. ll phases of the external power supply used by the system before wiring Failure to do so may cause electric shock product damage or malfunctions A 3 WIRING PRECAUTIONS N CAUTION e Be careful not to let foreign matter such as dust or wire chips get inside the unit This may cause a fire failure or malfunctions Make sure to securely connect the cable to the connector of unit Incorrect connection may cause malfunctions Make sure to fix communication cables and power cables to the unit by ducts or clamps Failure to do so may cause damage of the unit or the cables due to accidental pull or unintentional shifting of the cables or malfunctions due to poor contact of the cables Do not hold the cable by hand and pull it out from the unit When removing the cable from the unit make sure to hold the connector by hand and pull it Failure to do so may cause malfunctions or damage to the unit or cable STARTUP AND MAINTENANCE PRECAUTIONS NWARNING Do not touch the connector while power is on Failure to do so may cause electric shock or malfunctions Before starting cleaning always shut off GOT power externally in all phases Not doing so can cause a unit failure or malfunction A 4 STARTUP AND MAINTENANCE PRECAUTIONS N CAUTION Do not disassemble or modify any unit This will cause failure malfunction injuries or fire Do not touch the conductive areas and electronic parts of this
13. n LX 8K points 8192 points 1KB LY 8K points 8192 points 1KB Transient transmission Up to 1920 bytes capacity Communication speed 1Gbps Communication method Token ring Number of stations per Up to 120 stations network Control station 1 Normal station 119 Fiber optic cable Multi mode fiber Uz CC Link IE Controller Network Reference Manual Overall cable distance 66000m When 120 stations are connected Connection cable Item Specification Station to station s distance Max 550m Core Clad 50 125 y m Max number of networks Max number of groups 32 Transmission path Duplex loop Optical fiber 1000BASE SX MMF fiber optic cable specifications Standard 1EC60793 2 10 Types A1a 1 50 125 u m multimode Transmission loss max 3 5 dB km or less 850nm Transmission band min Connector specifications Duplex LC connector Standard 1EC61754 20 Type LC connector Connection 0 3 4B or less loss Polished surface Internal current 1 07A consumption Weight 0 28kg 0 62Ib 1 Please note that use of a fiber optic cable requires the expertise special tools and dedicated connector for connection Please contact your local Mitsubishi Electric System 8 Service Co Ltd or representative for the purchase of the required items 239 500 MHz km or more 1 850nm PC Physical Contact polishing
14. tus Communication error 2 Error mode When the RUN LED is blinking the LED display format is the error mode In the error mode if an error occurs restart the GOT If the error mode is not released after restarting the GOT the system alarm 460 Communication unit error may occur For system alarms refer to the User s Manual for the GOT used LED name Status Description Blinking Shows that it is in the error mode On or off No error Off No hardware failure On Hardware failure Off No starting error On Starting error 2 Connector IN side OUT side OUT Reverse loop receiving OUT Forward loop sending IN Forward loop receiving IN Reverse loop sending 4 INSTALLATION PROCEDURE The installation procedure for the CC Link IE communication unit is explained using the GT1575 1 Power off the GOT 2 Remove two extension unit covers of the GOT 3 Attach the extension interface relay board to the extension interface 2 on the GOT After the installation detach the connector cover from the extension interface relay board For the following GOT types the extension interface relay board is not needed GT1655 GT1550 of the GOT1000 series GT27 GT25 of the GOT2000 series 4 Fit the CC Link IE communication unit in the GOT case Remove the connector cover 5 Fix the CC L
15. unit Connect the cable side connector to d Unit side the module side connector paying Cable side x connector attention to the orientation connector i Push it until a click is heard a Lightly pull it to check that it is securely connected Completed 3 Disconnecting fiber optic cable Connector hook l CC Link IE SS communication unit k Unit side tumithe power dfi Cable side JL connector I connector Press the connector hook to disconnect the cable y Completed Connector hook 7 EXTERNAL DIMENSIONS 1 CC Link IE communication unit 133 5 24 3 GOT 0 12 main unit 98 3 86 120 4 72 0 12 SS CS Ga i ao A EIER 44 1 73 35 1 38 33 5 1 32 35 1 38 37 1 46 E 32 1 26 32 1 26 37 1 46 37 1 46 35 1 38 35 1 38 37 1 46 37 1 46 37 1 46 37 1 46 37 1 46 37 1 46 37 1 46 37 1 46 Unit mm inch 10 2 Extension interface relay board Warranty Mitsubishi will not be held liable for damage caused by factors found not to be the cause of Mitsubishi machine damage or lost profits caused by faults in the Mitsubishi products damage secondary damage accident compensation caused by special
16. unit directly Doing so can cause a unit malfunction or failure Make sure to externally shut off all phases of the power supply before cleaning the unit and retightening unit mounting screws Failure to do so may cause the unit to fail or malfunction Loose tightening may cause a fall of the unit short circuits or malfunctions Overtightening may damage the screws and or the unit resulting in a fall of the unit short circuits or malfunctions Make sure to touch the grounded metal to discharge the electricity charged in the body etc before touching the unit Failure to do so may cause a failure or malfunctions of the unit DISPOSAL PRECAUTIONS N CAUTION Dispose of this product as industrial waste TRANSPORTATION PRECAUTIONS N CAUTION Make sure to transport the GOT main unit and or relevant unit s in the manner they will not be exposed to the impact exceeding the impact resistance described in the general specifications of Use this unit in the environment that satisfies the general specifications described in the User s Manual for the GOT used as they are precision devices Failure to do so may cause the unit to fail Check if the unit operates correctly after transportation When fumigants that contain halogen materials such as fluorine chlorine bromine and iodine are used for disinfecting and protecting wooden packaging from insects they cause malfunction when entering our products Please ta
17. y Please save this manual to make it accessible when required and always forward it to the end user A 1 DESIGN PRECAUTIONS NWARNING e f a communication fails in data link the faulty station holds the data link data generated before the communication error Create an interlock circuit in the sequence program using the communication status information in order that the system will operate safely Failure to do so may cause mis outputs or malfunctions resulting in accidents Check the faulty station and the operation status during communication error by referring to the relevant manuals Some failures of cable or communication unit may cause the GOT to keep the outputs on or off Create an external circuit for monitoring output signals that may lead to serious accidents Failure to do so may cause mis outputs or malfunctions resulting in accidents If a communication error including cable disconnection occurs during monitoring the communication between the GOT and programmable controller CPU may be interrupted and the GOT may be inoperative For bus connection The programmable controller CPU is down and the GOT is inoperative For other than above The GOT is inoperative When configuring a system including the GOT the possibility of GOT communication error must be considered make sure the operation significant for the system will be performed by switches on devices other than the GOT Failure to do so may cause m
Download Pdf Manuals
Related Search