10-100M media converter with 2 RJ45 ports - Agenda
Contents
1. link is fail TX SPD Left UTP port on 100M speed one speed off 10M _ speed LED UTP port on The UTP link TX LINK ACT link action is in correct Right one status connection LED Blink Data packet goes through TX end off The UTP link is fail 6 Technical Specifications 1 Standard Protocol IEEE802 3 10 Base T standard IEEE 802 3u 100Base TX FX standard 2 Connector Two RJ 45 connector one SC ST fiber connector 3 Operation mode full duplex mode or half duplex mode 4 Power supply parameter outside 5V DC 1A built in 110 265V AC 48VDC 5 Environmental temperature 0 C 60 C 6 Relative humidity 5 90 7 TP cable Cats UTP cable 50 125 62 5 125um multi mode fiber 9 125 10 125um single mode fiber 8 Fiber 9 Dimensions External power supply 26mmx 71mm x 94mm Built in power supply 40mm x 110mm x 140mm WT 8110 Fast Ethernet Media Converter User Manual Tel Fax Email Web2. 10 100M Fiber Ethernet Media Converter With 2 Ethernet Ports amp 1 Fiber Ports Copyright Statement This publication may not be reproduced as a whole or in part in any way whatsoever unless prior consent has been obtained FCC Warning The 10 100M Fast Ethernet Media Converter series have been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These standards are designed to provide reasonable protection against harmful interference when these devices are operated in a commercial environment These devices generate use and can radiate radio frequency energy and may cause harmful interference to radio communications unless installed in accordance with this User s Guide Operation of these devices in a residential area is likely to cause harmful interference which will make the user responsible for the appropriate remedial action at his her own expense CE Mark Warning These are Class A products In a domestic environment these products may cause radio interference in which case the user will need to consider adequate preventative methods 1 Packing list The box should contain the following items The Media Converter AC DC Power Adapter for external models or Power Cord for internal models The User s Manual Warranty Card Please notify your sales representative immediately if any items are missing or damaged 2 Features 1 Support Tag
3. VLAN Port VLAN 2 Support 10 100Base TX to 100Base FX can be connected to relational networking equipments 3 With 128Kb RAM 4 Support Automatic Switch between parallel lines and crossed lines 5 With LED Lamps function link activity 10 100M power 6 Support select working mode via Hyper terminal 7 The transmission distance can up to 120Km 3 Ethernet Standards Comply with IEEE802 3 IEEE802 3u 4 Installation e Attach fiber cable from the media converter to the fiber network The fiber connections must be matched transmit socket to receive socket the TX RX fiber cable must be paired at both ends e Attach a UTP cable from the 10 100BASE T network to the RJ 45 port on the media converter e Connect the power adapter to the media converter and check that the Power LED lights up The TX LINK ACT and FX LINK ACT LEDs will light up when all the cable connections are satisfactory 5 Tables for panels and LED function TX RX Table 3 1 Front panel Table 3 1 Back panel Table 3 3 LED Lamps function LED Lamps Functions Status Description PWR Power on Power is on LED and normal off Power is fail FX SD Fiber port on Fiber signals link action is detected status off No fiber LED signals FX LINK ACT on Fiber link is in Fiber port correct link action connection status Blink Data packet LED goes through FX end off Fiber
Download Pdf Manuals
Related Search