SCD-2022R & SCD-2042R User Manual
Contents
1. 12_ Installation 2 Hold the ceiling bracket located where the arrow points to and separate it from the main body of the camera by rotating it anti clockwise 3 Place the separated ceiling bracket so that the Front side faces the area to be monitored and install it with the tapping screws NOILVTIVLSNI Ceiling bracket tapping screw S f you want to install the camera with the ceiling bracket combined fix it using two tapping screws at the side of the main body 4 To combine the main body with the ceiling bracket make sure that the pan base fixation screw face the opposite side of the Front side of the ceiling bracket and rotate it clockwise 5 Adjust the camera lens to face the area to be monitored and fix the main body and the dome cover by aligning the grooves and rotating the body clockwise English_13 instalation Adjust the panning and tilting rotating while watching the monitior Pan Base 1 You can adjust camera to any direction by using Pan Tilt Rotate mechanism e Pan Base moves by 176 to each side direction and 352 on the whole e Tilt Base covers 75 angle 2 Methods of adjustment The case of wall installation After mounting the camera on a wall adjusting the panning angle so that the camera can face the direction to monitor when tilted O Adjust the tilting angle by rotating the tilt base Tighten the pan base hold screw The case of ceiling2. IR MODE Function Adjusting the intensity of IR LEDs depends upon the closeness of the object which in order to prevent saturation Indoor Visibility range M In B W mode the IR LEDs are illuminated the indoor visibility range at O Lux is 7M English 9 NOILDNAOHLNI e introduction Communication Coaxial communication methods are supported Protocol Pelco Coaxitron e OSD The camera control is convenient by using 17 different foreign language O S D NTSC English Japanese Spanish French Portuguese Korean PAL English French German Spanish Italian Chinese Russian Polish Czech Romanian Serbian Swedish Danish Turkish Portuguese WHAT S INCLUDED Check if the following items are included in the product package dd d CAMERA Quick Manual Tapping Screw 3EA Installation Video Output Cable The illustration above may not be exactly same as the real parts for reference only 10 Introduction COMPONENT NAMES AND FUNCTIONS NOILONGOULNI Pan Base Control panning angle of camera Tilt Base Control tilting angle of camera Lens Module SCD 2022R f 3 8mm F2 0 IR LENS SCD 2042R f 8 0mm F2 0 IR LENS O Power input terminal Connect the Power DC 12V Ground Terminal D amp N Input Terminal You can switch to Day amp Night Mode by connecting an external signal to this terminal Video Ou
3. SAMSUNG TECHWIN High Resolution IR Dome Camera SCD 2022R User Manual SCD 2042R CE Im High Resolution IR Dome Camera User Manual Copyright 2013 Samsung Techwin Co Ltd All rights reserved Trademark SAMSUNG TECHWIN P is the registered logo of Samsung Techwin Co Ltd The name of this product is the registered trademark of Samsung Techwin Co Ltd Other trademarks mentioned in this manual are the registered trademark of their respective company Restriction Samsung Techwin Co Ltd shall reserve the copyright of this document Under no circumstances this document shall be reproduced distributed or changed partially or wholly without formal authorization of Samsung Techwin Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document but no formal guarantee shall be provided Use of this document and the subsequent results shall be entirely on the user s own responsibility Samsung Techwin reserves the right to change the contents of this document without prior notice Warranty If the product does not operate properly in normal conditions please let us know Samsung Techwin will resolve the problem for free of charge The warranty period is 3 years However the followings are excluded e f the system behaves abnormally because you run a program irrelevant to the system operation Deteriorated performance or natural worn out in process of ti
4. 1 120 000sec 1 50 1 120 000SeC White Balance Reverse ATW Outdoor Indoor Manual AWC gt SET 1 800K 10 500K OFF H REV IR Distance 7m IR LED 8 EA Communication Coaxial Control SPC 300 Compatible Protocol Environmental Coax Pelco C Coaxitron Operating Temperature Humidity 10 C 55 C 14 F 131 F Less than 90 RH Electrical Input Voltage Current DC 12V 10 0 3A Mechanical Dimension 0107 6 x 83 7mm Weight 240g English_29 Specifications SPECIFICATIONS Video Imaging Device 1 3 Super HAD CCD II Total Pixels 1020 H x 508 V 1020 H x 596 V Effective Pixels 976 H x 494 V 976 H x 582 V Scanning System 2 1 Interlace Synchronization Internal Frequency H 15 734KHz V 59 94Hz H 15 625KHz V 50Hz Horizontal Resolution Min Illumination 700 TV lines ER Mode B W 700 TV Line Color 0 15Lux S0IRE F1 2 0 0002 Lux S0IRE F1 2 Sens up 512x BW 0LUX IR LED On S N Ratio 52dB AGC off Weight on Video Output CVBS 1 0Vp p 750 composite Lens Type Focal Length 8mm Max Aperture Ratio F2 0 Angular Field of View H 34 V 26 Min Object Distance 0 4m Lens Type Fixed Mount Type Board Type PAN TILT ROTATE Pan Tilt 0 352 0 75 Operational English Japanese Spanish tahan Chinese Russian Polish On Screen
5. 10s 15s 20s 30s 40s 60s 4 RETURN 4 e EXTERN Ground to the grounding terminal to allow automatic switching between COLOR and BAW Black White e COLOR The picture is always displayed in color e B W The picture is always displayed in black BW MODE SETUP S gt 1 BURST MODE BURST MODE You can turn on or off 2JR MODE the burst signal on B W mode 3 RETURN IR MODE HIGH LOW USER When IR LED is turned on in B W the objects can be clearly identified due to the IR MODE SETUP function that decreases screen saturation gt 1 IR MODE of objects within a short distance e TOP BOTTOM LEFT RIGHT After selecting USER you can adjust the range according to the location of objects Press SET to Return A When AGC in the EXPOSURE menu is OFF AUTO mode is not available to select 22 Setup SPECIAL 1 When the SETUP menu screen is displayed select SPECIAL by using the Function Setup switch so that the arrow indicates SPECIAL Select a desired mode using the Function Setup SPECIAL switch gt 1 IMAGE ADJ 4 2 CAM TITLE o 3 PRIVACY m 4 MOTION DET 5 SYNC 6 COAX 7 SSDR 8 RETURN 4H baie SPECIAL menu screen is displayed lated select IMAGE ADJ by using the Function Setup 1 MONITOR LCD switch so that the arrow indicates IMAGE ADJ 2 REVERSE d 2 iind 2 desired mode using the Function Setup nis E SH 5 RETURN 4 Monitor Please change the settings value of VAPORE video
6. 31 8018 3745 SAMSUNG TECHWIN AMERICA Inc SAMSUNG TECHWIN EUROPE LTD 100 Challenger Rd Suite 700 Ridgefield Park NJ 07660 Samsung House 1000 Hillswood Drive Hillswood Business Park Toll Free 1 877 213 1222 Direct 1 201 325 6920 Chertsey Surrey UNITED KINGDOM KT16 OPS Fax 1 201 373 0124 TEL 44 1932 45 5300 FAX 44 1932 45 5325 www samsungcctvusa com www samsungtechwin com www samsungsecurity com P NO PT01 001711A
7. SPECIFICATIONS Video Imaging Device 1 3 Super HAD CCD II Total Pixels 1020 H x 508 V 1020 H x 596 V Effective Pixels 976 H x 494 V 976 H x 582 V Scanning System 2 1 Interlace Synchronization Internal Frequency H 15 734KHz V 59 94Hz H 15 625KHz V 50Hz Horizontal Resolution Min Illumination 700 TV lines ER Mode B W 700 TV Line Color 0 15Lux 50IRE F1 2 0 0002 Lux 50IRE F1 2 Sens up 512x B W 0 LUX IR LED On S N Ratio 52dB AGC off Weight on Video Output CVBS 1 0Vp p 750 composite Lens Type Focal Length 3 8mm Max Aperture Ratio F2 0 Angular Field of View H 78 V 59 Min Object Distance 0 4m Lens Type Fixed Mount Type Board Type PAN TILT ROTATE Pan Tilt 0 352 0 75 Operational Eng Japanese Spanish ater thes sn ae On Screen Display French Portuguese Korean Czech Romanian Serbian Swedish Danish Turkish Portuguese Camera Title Off On Displayed 15 characters 28_ Specifications SCD 2022RP SCD 2022RN Day amp Night Auto ICR Color B W External D N Backlight Compensation OFF USER BLC HLC e Contrast Enhancement SSDR Off On i Digital Noise Reduction 3D DNR Off On z Defog Off Auto Manual gt Motion Detection Off On 2 Privacy Masking Off On 8 programmable zones Gain Control Off Low Middle High Electronic Shutter Speed 1 60
8. battery return system Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment and is taking a number of steps to provide customers with more environment friendly products The Eco mark represents Samsung Techwin s will to create environment friendly products and indicates RoHS compliant that the product satisfies the EU RoHS Directive 6 Safety information Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with
9. cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus z 13 Unplug this apparatus when a card is used Use caution when moving the A cart apparatus combination to avoid injury from tip over 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as powersupply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped NO oR WD Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus 15 This product is intended to be supplied by a Listed Power Supply Unit marked Class2 and rated from 12VDC min 0 3A English_7 NOILLVINHOJNI ALSAVS Contents INTRODUCTION INSTALLATION CONNECTION SETUP TROUBLESHOOTING 8 Contents SPECIFICATIONS 12 12 14 15 15 16 18 18 27 28 32 Features What s included Component names and Functions Before Installation Installation Adjust the panning and tilting rotating while watching the monitor Connecting to Monitor Connecting to Power Using coaxial communications Menu Configration Menu Setup Troubleshooting Specifications Dimension introduction FEATURES Excellent Sensitivity The built in high sensi
10. household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable EE reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Correct disposal of batteries in this product Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free
11. i the mode using the Function Setup 3 MASK COLOR WHITE switc 4 SEL POS LEFT AREA You can select up to 8 PRIVACY areas 5 POS immi 42 MODE Determines whether to use the aea 6 RETURN selected 24 Setup MASK COLOR Determine area color You can select GREEN RED BLUE BLACK WHITE and GRAY SEL POS POS Adjust the size and position of the selected area RETURN Select this to save the PRIVACY menu settings and retum to the SPECIAL menu e o e MOTION DET This product has a feature that allows M you to observe movement of objects T S DET 5 in 4 different areas on the screen MODE and the words MOTION DETECTED 3 TOP ulm 4 appear on the screen when movement 4 BOTTOM mm 15 is detected You can monitor activity 5 LEFT Kann 9 more efficient 6 RIGHT mini gm 46 Q When the SPECIAL menu screen is displayed 7 SENSITIVITY tum 4 press the Function Setup switch so that the 8 RETURN arrow indicates MOTION DET Set up the mode using the Function Setup switch AREA You can select up to 4 MD areas MODEI Determines whether to use the MD area selected in AREA TOP BOTTOM LEFT RIGHT Adjust the area to be enhanced SENSITIVITY Adjust the sensitivity of MD the lower level the higher sensitivity RETURN Select this to save the MOTION DET menu settings and return to the SPECIAL menu A MOTION DET areas show only MOTION DET menu Therefore MOTION DET areas don t display on th
12. installation After mounting the camera on a ceiling adjusting the panning angle to the correct viewing position by rotating the pan base O Adjust the tilting angle by rotating the tilt base O Tighten the pan base hold screw 14 Installation Connection CONNECTING TO MONITOR Connect the Video Output jack to the VIDEO IN jack of monitor Monitor NOILO3NNOO CCTV Camera e As the connecting method varies with the instruments refer to the manual supplied with the instrument e Only connect the cable when the power is turned off CONNECTING TO POWER Connect the adaptor to the power input connector as shown in the figure below The recommended adaptor specification for SCD 2022R 2042R is DC12V 500mA 6 WESS Power Input Terminal English_15 Connection When the resistance value of copper wire is at 20 C 68 F RIDES 26 24 22 20 18 opper wire size WS o nec m 0 13mm 0 22mm 0 33mm 0 52mm 0 83mm Resistance Q m 028 0 134 0 078 0 050 0 030 0 018 Voltage Drop W m 0077 0048 0 028 0018 0011 0 006 e Asshown in the table above voltage decreases as the wire gets longer Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera Standard voltage for camera operation DC 12V 10 There may be some deviation in volt
13. the guidelines do not enable you to solve the problem contact an authorized technician PROBLEM Nothing appears on the screen The image on the screen is dim The image on the screen is dark The camera is not working properly and the surface of the camera is hot The DAY NIGHT function does not work Color is not correct The screen flickers continually When coaxial communication is not available SOLUTION Check that the power cord and line connection between the camera and monitor are fixed properly Check that you have properly connected VIDEO cable to the camera VIDEO output jack Is the lens stained with dirt Clean your lens with a soft clean cloth Check the monitor and DVR settings gt If the camera is exposed to very strong light change the camera position Adjust the contrast feature of the monitor or DVR gt If you have an intermediate device set the 750 Hi z properly Check that you have properly connected the camera to an appropriate power source gt Check that AGC of EXPOSURE SETUP menu is OFF Check the setting of WHITE BAL SETUP menu Check that the camera is not pointing at the sun Make sure that the camera and monitor are installed within the recommended distance Use the video amplifier equivalent to coaxitron if the recommended installation distance is exceeded English_27 ONILOOHSFIANOHL Specifications
14. Display French Portuguese Korean Czech Romanian Serbian Swedish Danish Turkish Portuguese Camera Title Off On Displayed 15 characters 30_ Specifications SCD 2042RN SCD 2042RP Day amp Night Auto ICR Color B W External D N Backlight Compensation OFF USER BLC HLC Contrast Enhancement SSDR Off On Digital Noise Reduction 3D DNR Off On Defog Off Auto Manual Motion Detection Off On Privacy Masking Off On 8 programmable zones Gain Control Off Low Middle High Electronic Shutter Speed 1 60 1 120 000sec 1 50 1 120 000 Sec White Balance Reverse ATW Outdoor Indoor Manual AWC gt SET 1 800K 10 500K OFF H REV IR Distance 7m IR LED 8 EA Communication Coaxial Control SPC 300 Compatible Protocol Environmental Coax Pelco C Coaxitron Operating Temperature Humidity 10 C 55 C 14 F 131 F Less than 9096 RH Electrical Input Voltage Current DC 12V 10 0 3A Mechanical Dimension 0107 6 x 83 7mm Weight 240g English 31 SNOILVOIJIO3dS Specifications DIMENSION Unit mm 83 mm 81 6mm 32 Specifications MEMO MEMO MEMO SALES NETWORK SAMSUNG TECHWIN CO LTD Samsungtechwin R amp D Center 701 Sampyeong dong Bundang gu Seongnam si Gyeonggi do Korea 463 400 TEL 82 70 7147 8740 60 FAX 82
15. GE ADJ CAM TITLE PRIVACY SPECIAL MOTION DET SYNC COAX SSDR RETURN EXIT SAVE NOT SAVE RESET MENU SETUP Use the Function Setup switch within the camera Function Setup switch 1 Press the Function Setup switch Main setup menu is displayed on the monitor screen 18_ Setup MAIN SETUP Select the function gt 1 EXPOSURE Change the status using the Function 2 DEFOG using the Function Setup switch up 3 WHITE BAL Setup switch down 4 BACKLIGHT left right 5 SSNR3 6 DAY NIGHT 7 SPECIAL4J 8 EXIT dnias e 2 Select a desired function using the Function Setup switch Place the cursor over a desired item 3 Set up a selected item by using the Function Setup switch 4 To finish the setting select EXIT and press the Function Setup switch A An item with the 4 icon also has sub menus To select a sub menu select an item with the icon and press the Function Setup switch An item with the icon is unavailable due to function settings EXPOSURE 1 When the SETUP menu screen is displayed select EXPOSURE by using the Function Setup switch so that the arrow indicates EXPOSURE 2 Select a desired mode using the Function Setup EXPOSURE SETUP switch 1 BRIGHTNESS Ist 10 e BRIGHTNESS Adjusts the video brightness 2 AGC HIGH e AGC AUTO GAIN CONTROL OFF LOW MID 3 SENS UP AUTO 4l HIGH The higher the gain level the brighter the 4 RETURN screen but the high
16. R3 Noise is not reduced e ON Activates SSNR3 so that noise is reduced 2 RETURN lt _ 3 Set the SSNR3 mode to ON and press the Function Setup switch 4 Then you can adjust the noise reduction level SSNR3 1 LEVEL HUE 12 English 21 Setup A You cannot set the SSNR3 to ON or OFF when the AGC mode of the EXPOSURE menu is OFF When adjusting the noise reduction level of the SSNR3 mode remember that the higher the level set the more the noise level will be reduced but that after image may also occur DAY NIGHT You can display pictures in color or black and white 1 When the SETUP menu screen is displayed select DAY NIGHT by using the Up and Down buttons so that the arrow indicates DAY NIGHT 2 Select a desired mode using the Left and Right buttons according to the picture display you want AUTO The mode is switched to Color in a normal environment but switches to BAW mode when ambient illumination is low To set up the switching time for AUTO mode press the Function Setup switch You can turn on or off the burst signal on B W mode BURST MODE You can tum on or off the i e ole SETUP burst signal on B W mode DURATION You can select the brightness DURATION level at which the camera switches from day DWELL TIME to night mode 3 B W2 COLOR DWELL TIME You can select the duration DURATION time about changing the day night mode DWELL TIME 98 5s 7s
17. acklight by adopting a function of the proprietary W6 DSP chip 1 When the SETUP menu screen is displayed select BACKLIGHT by using the e Function Setup switch so that the arrow indicates BACKLIGHT e 2 Select a desired mode using the Function Setup switch depending on the camera c purpose E e USER BLC Enables a user to directly BLC SETUP select a desired area from a gt 11EVEL MIDDLE picture and to view the area 2 TOP mmm more clearly 3 BOTTOM mm 24 LEVEL Adjust level of the BLC function 4 LEFT nm 25 TOP BOTTOM LEFT RIGHT 5 RIGHT III KUN 84 6 RETURN Adjust the area to be enhanced HLC High Light Compensation This function masks the strong light to minimize white out due to over exposure and gt 1 LEVEL preserve much of the on screen details when LIMIT the camera aims a strong light source 3 MASK COLOR LEVEL Adjusts the brightness level of a 4 RETURN 4 monitoring area LIMIT Enable to change the operating condition HLC SETUP MIDDLE NIGHT ONLY BLACK MASK COLOR Change the color of the masking area Black Red Blue Gray Magenta e OFF Not being used SSNR3 This function reduces the background noise in a low luminance environment 1 When the SETUP menu screen is displayed select SSNR3 by using the Function Setup switch so that the arrow indicates SSNR3 2 Select a desired mode using the Function Setup switch e OFF Deactivates SSN
18. age drop depending on the type of wire and the manufacturer A Note that DC adaptor is not supplied with camera USING COAXIAL COMMUNICATIONS Be sure to connect power only after all the installation is complete e Coaxial Communications System e OSD Control method CAMERA DVR CONTROLLER SET MENU ENTER OSD KEY UP UP KEY JOYSTICK UP DOWN DOWN KEY JOYSTICK DOWN LEFT LEFT KEY JOYSTICK LEFT RIGHT RIGHT KEY JOYSTICK RIGHT 16 Connection e BNC e RS 485 NOILO3NNOO Video Cable The camera s video output port is connected to the monitor with a BNC coaxial cable shown below If the distance between the camera and the monitor exceeds the recommended maximum please use an auxiliary video amp Distance Recommended Cable Specification 300m 3C2V RG 59 U 450m 5C2V RG 6 U 600m 7C2V RG 11 U A t is recommended that pure copper coax cable is used and not copper coated steel as this will cause issues with the communication over the coaxial cable o ensure picture quality only single channel video output connector can be used while camera connected to other video equipments English 17 Setup MENU CONFIGURATION MAIN SETUP EXPOSURE BRIGHTNESS AGC SENS UP RETURN DEFOG e OFF AUTO MANUAL ATW OUTDOOR INDOOR ncc MANUAL ANC SET BACKLIGHT e OFF USER BLC e HLC SSNR3 ON OFF DAY NIGHT AUTO EXTERN COLOR e B W IMA
19. appropriate to your monitor PRR y 1 GAMMA 0 55 e CD Please select this menu item when using 2 PED LEVEL Wen 15 an LCD monitor You can change the gamma 3 COLOR GAIN TTTTBE PED level and color gain in the sub menus 4 RESET e USER Please use this menu item when using Press SET to Return a monitor other than standard ones You can change the gamma PED level and color gain in the sub menus REVERSE You can reverse the picture OFF You don t reverse the picture e H REV You can flip the picture horizontally on the screen SHARPNESS As you increase this value the SHARPNESS picture outline becomes stronger and clearer Adjust this value appropriately depending on the gt LEVEL m n 7 sharpness of the picture e OFF Tum off Sharpness function ON The higher the level is the sharper and clearer the outline of the image becomes e ER Enhanced Resolution Choosing this mode can increase the sharpness of the picture under the colour mode Press SET to Return English_23 Setup LANGUAGE You can select the menu language according to your requirements RUTURN Select this to save the IMAGE ADJ menu settings and return to the SPECIAL menu e CAM TITLE Ifyou enter a title the title will appear on the monitor If the SPECIAL menu screen is displayed use the Function Setup switch so that the arrow indicates CAM TITLE Set it to ON by using the Function CAMERA TITLE SETUP S
20. e monitor screen e SYNC The SCD 2022R 2042R just support the DC power input so the SYNC fixed on Internal Synchronization Type INT Internal Synchronization Type e COAX COAX option is set to On wil specify the use of coaxial communication e SSDR Samsung Super Dynamic Range SSDR illuminates darker areas of an image while SSDR SETUP retaining the same light level for brighter areas to LEVEL INDEM 8g even out the overall brightness of images with high contrast between bright and dark areas Press SET to Return English 25 Setup 1 When the SETUP menu screen is displayed select SSDR by using the Function Setup switch so that the arrow indicates SSDR 2 Usethe Function Setup switch to change the SSDR level in the sub menu according to the contrast between bright and dark areas SSDR ON SSDR OFF e RETURN Select this to save the SPECIAL menu settings and return to the MAIN SETUP menu EXIT Select a desired EXIT mode using the Function Setup switch depending on the camera purpose e SAVE Save the current settings and exit the MAIN SETUP menu e NOT SAVE Do not save the current settings and exit the MAIN SETUP menu e RESET Resets the camera settings to the factory defaults Monitor Language and COAX settings are not initialized 26 Setup Troubleshooting TROUBLESHOOTING If you have trouble operating your camera refer to the following table If
21. er the noise e SENS UP When it is night or dark the camera automatically detects the light level and maintains a clear picture if this model is activated OFF Deactivates the SENS UP function AUTO Activates the SENS UP function Press SET to Return e RETURN Select this to save the changes in the EXPOSURE menu and retum to the SETUP menu English_19 Setup DEFOG Through the defogging function camera can automatically recognize fog concentration of the image defog self correct in hazy rainy flue gas and other inclement weather to get a clear image 1 When the SETUP menu screen is displayed select DEFOG by using the Function Setup switch 2 Select a desired mode AUTO The camera wil automatically correct image according to the defogging level low middle DEFOG SETUP high set by the user gt 1 LEVEL MIDDLE Manual The camera wil adjust the definition of the 2 RETURN f image according to user s preferences through the defogging level low middle high e OFF Tum off Defogging function A Defogging and SSDR function cannot be run simultaneously When defogging function is set to AUTO or MANUAL mode SSDR function is not available When SSDR functions is tumed on defogging would become inactive WHITE BAL WHITE BALANCE Use the White Balance function to adjust the screen color 1 Whenthe SETUP menu screen is displayed select White Bal by using the Function Setup switch so
22. etup switch Press the Function Setup switch Use the Function Setup switch to move to a desired letter and select the letter by pressing the switch Repeat this to enter multiple letters You can enter up to 15 letters Move the cursor to for entering a space then press the Function Setup switch the cursor will skip to the next Enter a title move the cursor to POS and press the Function Setup switch The entered title appears FONT Ime on the screen Select the position to display the title on the screen by using the Function Setup switch and press When the position is determined select END and press the Function Setup switch to My oe Bie retum to the SPECIAL menu PR oe x ser A When the CAM TITLE menu is OFF no title will be displayed on the monitor screen even if you enter one Only English is available in this mode f you move the cursor to CLR and press the Function Setup switch all the letters are deleted To edit a letter change the cursor to the bottom left arrow and press the Function Setup switch Move the cursor over the letter to be edited move the cursor to the letter to be inserted and then press the Function Setup switch e PRIVACY Mask an area you want to hide on the screen When the SPECIAL menu screen is displ ayed press the Function Setup switch so gt 1 id ARENSE AREA that the arrow indicates PRIVACY gt MODE OFF Se
23. me Design and specifications are subject to change without prior notice Before operating the camera confirm the camera model and correct input power voltage To help you understand this manual thoroughly we ll introduce our model description i SCD 2022R 2042R SERIES e NTSC MODEL SCD 2022RN SCD 2042RN e PAL MODEL SCD 2022RP SCD 2042RP e POWER SOURCE SCD 2022RN SCD 2022RP DC12V SCD 2042RN SCD 2042RP DC12V Safety information RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING e To prevent damage which may result in fire or electric shock hazard do not expose this appliance to rain or moisture e To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions WARNING 1 Be sure to use only the standard adapter that is specified in the specification sheet Using any other adapter could cause fire electrical shock or damage to the product 2 Incorrectly connecting the power supply or re
24. placing battery may cause explosion fire electric shock or damage to the product 3 Do not connect multiple cameras to a single adapter Exceeding the capacity may cause abnormal heat generation or fire 4 Securely plug the power cord into the power receptacle insecure connection may cause fire 5 When installing the camera fasten it securely and firmly The fall of camera may cause personal injury 4 Safety information 6 Do not place conductive objects e g screwdrivers coins metal parts etc or containers filled with water on top of the camera doing so may cause personal injury due to fire electric shock or falling objects 7 Do not install the unit in humid dusty or sooty locations doing so may cause fire or electric shock 8 If any unusual smells or smoke come from the unit stop using the product in such case immediately disconnect the power source and contact the service center continued use in such a condition may cause fire or electric shock 9 f this product fails to operate normally contact the nearest service center never disassemble or modify this product in any way samsung is not liable for problems caused by unauthorized modifications or attempted repair 10 When cleaning do not spray water directly onto parts of the product doing so may cause fire or electric shock CAUTION 1 Do not drop objects on the product or apply strong shock to it Keep away from a location subject to excessi
25. that the arrow indicates White Bal 2 Select a desired mode using the Function Setup switch x Select one of the following 5 modes as appropriate for your purpose e ATW Select this when the color temperature is between 1 800 K and 10 500 K OUTDOOR Select this when the color temperature is between 1 800 K and 10 500 K sodium light inclusion e INDOOR Select this when the color temperature is between 4 500 K and 8 500 K e MANUAL Select this to fine tune White Balance manually Set White Balance first by using the ATW WB MANUAL or AWC mode After that switch to MANUAL mode P RED GAIN ums 117 fine tune the White Balance and then press the BLUE GAIN nimmt 193 Function Setup switch e AWC gt SET To find the optimal luminance Press SET to Return level for the current environment point the camera towards a sheet of white paper and press the Function Setup switch If the environment changes readjust it A White Balance may not work properly under the following conditions In this case select AWC SET mode When the color temperature of the environment surrounding the subject is out of the control range When the ambient ilumination of the subject is dim f the camera is directed towards a fluorescent light or is installed in a place where illumination 20 Setup BACKLIGHT The SCD 2022R 2042R is designed to deliver a distinctive subject and background at the same time even when the subject is b
26. tivity COLOR CCD produces a clear image Color 0 15Lux 50IRE F1 2 0 0002 Lux 50IRE F1 2 Sens up 512x B W 0 LUX IR LED On High Resolution By adopting a diagonal 6mm 1 3 520 000 pixel NTSC 610 000 pixel PAL SONY CCD the camera produces clear picture quality with a horizontal resolution of 7OOTV lines in ER mode and 7OOTV lines for BW SSNR3 Samsung Super Noise Reduction Function The high performance W6 DSP chip effectively removes low light gain noise and afterimage to provide clear images even in dark environments Day amp Night This camera has a function that automatically selects the mode that is appropriate for daytime or night time conditions The COLOR mode operates in daytime conditions to provide optimum colors and B W mode operates in night time conditions to enhance the definition of the image Defog The camera is able to recognize the concerntration of fog in the image and automatically defog correct image of the bad weather such as fog rain mist fumes etc to make it clear SSDR Samsung Super Dynamic Range For images with high contrast between bright and dark areas from difficult lighting conditions such as backlighting this camera selectively illuminates darker areas while retaining the same light level for brighter areas to even out the overall brightness Miscellaneous Functions HLC High Light Compensation SENS UP H REVERSE SHARPNESS PRIVACY and MOTION DET functions are provided
27. tput Jack Video signals are output through this port Connect this port to the Video IN port of a monitor O Function Setup switch Display the menu on the screen and move the cursor to four directions to confirm status or after changing a selected item O Video Output Terminal to Monitor Dome Cover English 11 installation BEFORE INSTALLATION Before installing your camera you have to read the following cautions You have to check whether the location ceiling or wall can bear five times the weight of your camera e Don t let the cable to be caught in improper place or the electric line cover to be damaged Otherwise it may cause a breakdown or fire e Before installing your camera you have to adjust the lens focus zoom and switch settings When installing your camera don t allow any person to approach the installation site If you have any valuable things under the place move them away INSTALLATION 1 Separate the dome cover by turning anti clockwise and separate the shield case by pulling from the camera body Locking direction Unlocking direction Clockwise Latch en A The installation should be done by qualified service personnel or system installers f the ceiling material is not strong enough to hold the installation screws the camera may fall off Reinforce the ceiling as needed To change the position of the cable take away the Hole Cover and pass the cable through
28. ve vibrationor magnetic interference 2 Do not install in a location subject to high temperature over 55 C low temperature below 10 C or high humidity Doing so may cause fire or electric shock 3 If you want to relocate the already installed product be sure to turn off the power and then move or reinstall it 4 Remove the power plug from the outlet when then there is a lightning Neglecting to do so may cause fire or damage to the product 5 Keep out of direct sunlight and heat radiation sources It may cause fire 6 Install it in a place with good ventilation 7 Avoid aiming the camera directly towards extremely bright objects such as sun as this may damage the CCD image sensor 8 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids Such as vases shall be placed on the apparatus 9 The Mains plug is used as a disconnect device and shall stay readily operable at any time 10 Do not expose the camera to radioactivity Radioactivity exposure may damage the CCD English 5 NOILVINHOJNI ALSAVS Safety information Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other
Download Pdf Manuals
Related Search