user manual-Camera only0421.cdr - Hi
Contents
1. e When the transmitter is turned on and the battery is getting charged the power status LED flashes green and once the battery is fully charged the LED becomes solid When the transmitter is turned off and the battery is getting charged the power status LED flashes red and once the battery is fully charged the LED turns off e The charging time for a fully discharged rechargeable battery when the device is turned off is approximately 5 hours The charging time doubles if the transmitter is turned on while the battery is getting charged 4 USING THE TRANSMITTER CAMERA e For optimal transmission place the camera inthe room to be monitored in such a way as to ensure the optimal surveillance of your baby or the elderly You can also mount the camera using the stand included as described in section 2 hardware to mount the stand to a wall or ceiling not included Note For safety reasons and for optimum sound transmission we recommend that you keep the transmitter at least 1 meter 3 feet form the baby IMPORTANT Never place camera in the baby s cot bed or playpen NOTE The transmitter will automatically turn on when plugged into AC adapter or computer e The transmitter can be powered with the AC adapter the rech argeable battery or via computer s USB port using a USB cable e To use the rechargeable battery the device shall be turned on without the AC adapter plugged in e The transmitter turns on when the ON OFF PAIR butt2. radio or TV interference caused by unauthorized modifications to this equipment Such modif ications could void the user s authority to operate the equipment qd CAMERA Only for firmware upgrade 2 Camera Lens 3 RESET button 4 Mini USB connection On Off PAIR button Power and charging status indicator LED Microphone Mount hole NOTE ON OFF Press and hold button for 3 to 5seconds PAIR Press and quickly release button 1 NIGHT VISION IR OPERATION The camera is equipped with eight 8 Infrared LEDS for night vision operation In low light situation the Infrared LEDS turn on automatically to activate night vision NOTE The night vision picture is always black amp white and ot that sharp This camera has up to 10 feet night vision range 2 USING CAMERA STAND MOUNT e Screw the camera on the stand mount and setup as shown or screw it to a wall or ceiling screws no included 3 CHARGING RECHARGEABLE BATTERY IN TRANSMITTER CAMERA The rechargeable battery supplied with the transmitter camera must be fully charged before it is used for the first time on battery power Warning Only qualified technicians or our technical staff is authorized to change the rechargeable battery in the transmitter NOTE The transmitter automatically turns on and the battery Starts getting charged when AC adapter or a USB cable connected to a computer is plugged into the MINI USB socket on the transmitter
3. 2 4Ghz WIRELESS BABY MONITOR DIGITAL CAMERA USER MANUAL FCC Notice to Users This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation The manufacturer is not responsible for any
4. OK MENU button to complete the selection the screen will display register camera where is the camera number you selected e Press and quickly release ON OFF button on the CAMERA to complete pairing process e f pairing is successful the screen will display Camera Registered where is the camera number you selected in previous step Thumbs up sign will appear next to the camera NOTE If the pairing registration process is not successful repeat this process again e Press ESC button twice to exit from the Menus and view the camera Limited 1 Year Warranty Coverage Hi Tech Trading USA Inc HiTT warrants this product Product against defects in materials and workmanship under normal consumer use for 1 year from the date of purchase HiT T at its option will at no charge repair replace or refund the purchase price of this Product should it not conform to this warranty This limited warranty is a consumer s exclusive remedy extends only to the first consumer purchaser is not transferable and is valid only on Products purchased by consumers in the United States or Canada Exclusions Normal Wear and Tear Periodic maintenance repair and replacement of parts due to normal wear and tear are excluded from coverage Batteries Only batteries whose fully charged capacity falls below 60 of their rated capacity and batteries that leak are covered by this limited warranty Battery usage esti
5. contents of this User Manual are provided as is Except as required by applicable law no warranties of any kind either express or implied including but not limited to the implied warranties of merchantability and fitness for a particular purpose are made in relation to the accuracy reliability or contents of this guide Hi Tech Trading USA Inc P O Box 179 Woodbury New York 11797 Contact Information Email help hittusa com Web www hittusa com C FE
6. mates are only based upon our engineering testing Actual performance will vary based on product settings environmental conditions and usage Battery Capacity decreases over time and use Miscellaneous This warranty does NOT cover defects or damage that result from a improper operation storage misuse or abuse accident or neglect such as physical damage cracks scratches etc to the surface of the Product resulting from misuse b contact with liquid water rain extreme humidity or heavy perspiration sand dirt or the like extreme heat or food c use of the Product for commercial purposes or subjecting the Product to abnormal usage or conditions d service installation alteration or modification in any way by someone other than HiTT and e other acts which are not the fault of HiTT Obtaining Service To obtain service or information please send email to help hittusa com You will receive instructions on how to ship the Product at your expense to a HiT T Service Center To obtain service you must include a copy of your receipt ZOpid and the Stylized Logo are registered in the US Patent amp Trademark Office All other product or service names are the property of their respective owners 2011 Hi Tech Trading USA Inc The information contained in this User Manual is believed to be correct at the time of printing Hil T reserves the right to change or modify any information or specifications without notice The
7. on is pressed for 5 seconds As soon as the camera is powered on the LED indicator turns solid green or flashes green to indicate the camera is powered on To turn camera off press ON OFF PAIR button for 5 seconds e When the battery voltage falls below 3 6V the Power Indicator LED turns red from green indicating the battery needs to be charged The receiver displays Camera battery is low on the screen IMPORTANT In case of audio or video interference press and release RESET button to switch transmitter to a different channel 5 REGISTER PAIR CAMERA WITH 3 2 SCREEN BABY MONITOR Mm e Turn camera power ON a Turn Monitor ON Menu OK Main Menu Register Camera Camera 1 Q Register Camera 1 Yes Ontransmitter camera On Off Note Press and quicklyrelease the ON OFF PAIR button on the CAMERA to complete pairing process e Press OK MENU button on the monitor to display Main Menu e Use UP or DOWN button to highlight Register Camera and press OK MENU button to complete the selection e From Register Camera Menu highlight one of the available not used camera number you want to assign to this new camera and press OK MENU button to complete the selection NOTE Camera numbers which have already been allocated used to register existing cameras have thumbs up sign next to the camera number e Use UP or DOWN button to select Yes and press
Download Pdf Manuals
Related Search