21.5-INCH PROFESSIONAL HD MEDICAL MONITOR - iONYX-SR
Contents
1. 1 Unavailable in RGB PC 13 CONTROLS AND FUNCTIONS Change Name 001 2 3 4 5 6 780 PN MNOPQRSTUVWXYZ 1 Vol 4 Move the cursor on the key board 2 on the Remote Control Move the cursor on the user 3 Enter Select the character in the key board 4 If you press the Menu key screen is moved to the previous menu mode 5 you press Exit key screen is came out from the OSD menu RGB PC Manual Adjust Auto Adjust Auto geometry adjustment Adjusts the number of horizontal picture elements 100 Adjusts the horizontally picture position 100 Adjusts the vertically picture position 100 Adjusts the vertical noise of screen image 0 100 X Available in only RGB PC 14 MOUNTING GUIDE Wall mounting Optional The LCD monitor is suitable for wall mounting by using the VESA 100 standard wall mount not included in the delivery M4x10 screws Attention You must use four M4x10 screws to assemble this monitor and the wall mount bracket x WARNING If user use longer than M4x10mm it may cause the damage on the unit Please follow instructed bolt size amp length 15 D SUB CONNECTOR PIN ASSIGNMENTS Pin Assignments Um wow vm D SUB Accessories Power cord Power adaptor User manual VGA RGB PC cable Stand base FS4x10 screws 32. fire hazard do not expose the unit to rain or moisture This unit is designed to be used in the office or home Do not subject the unit to vibrations dust of corrosive gases KEEP INAWELL VENTILATED PLACE Ventilation holes are provided on the cabinet to prevent the temperature from rising Do not cover the unit or place anything on the top of unit AVOID HEAT Avoid placing the unit in direct sunshine or near a heating appliance TO ELIMINATE EYE FATIGUE Do not use the unit against a bright back ground and where sunlight or other light sources will shine directly on the monitor BE CAREFUL OF HEAVY OBJECT Neither the monitor itself nor any other heavy object should rest on the power cord Damage to a power cord can cause fire or electrical shock INTERFERENCE STATEMENT NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning
3. 21 5 INCH PROFESSIONAL HD MEDICAL MONITOR with SDI interface USER MANUAL Please read this manual thoroughly before use and keep it handy for future reference 5 SAFETY INS TROCETON Laa SNO Kr 4 FCC RF INTERFERENCE STATEMENT 5 INSTALLATION essen kenn 6 CONNECTING WITH EXTERNAL EQUIPMENT 0702 20202 2 2 7 REMOTE FUNCTIONS oa o dont unit 8 CONTROLS AND FUNCTIONS zu 9 14 MOUNTINGIGUIDE zx 2 15 D SUB CONNECTOR PIN ASSIGNMENTS _ 16 POWER MANAGEMENT rk 17 SPECIFICATION sen ee ee ats 18 FROUBLE SHOOTING GUIDE ass 19 This Monitor was Manufactured by ISO 9001 Certified Factory SAFETY INSTRUCTION Important Safety Instruction Read these instructions Keep these Instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth CON i ME Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug Apolarized plug has two blades with one wider than the other Agrounding t
4. EA Remote controller Batteries Wall mount Optional CONDO 0 ON a 16 POWER MANAGEMENT Power Consumption Power Consumption LED Indicator The power management feature of the monitor is comprised of two stages Turned on blue and turned off red Turned Off Not Operation 17 SPECIFICATIONS 21 5 Diagonal AM TFT Active Matrix Pixel pitch mm 0 24825 H x 0 24825 V Brightness 250 Typical LCD Type Contrast ratio 1000 1 Typical Viewing an 170 160 H V ree 31 80kHz Vertical 56 75Hz VIDEO 1ch input 1 0Vp p 750 terminated 1ch loop through out HDMI oe Definition Multimedia Interface RGB PC 3G HD SD SDI 75ohm 1ch input Ich loop through out ACTIVE SCREEN SIZE SCREEN SIZE 476 64mm x 268 11mm PACKING DIMENSIONS 580mm x 440mm x 145mm 22 83 x 17 32 x 5 71 WxHxD Net 5 51Kg 12 15 lbs WEIGHT Gross 7 13Kg 15 72 lbs ELECTRICAL RATINGS 12V 1 8A 100 240V 50 60Hz SDI Support Mode Table Support Resolution 36 1080 60 59 94 50 Input 1080i 60 59 94 50 FREQUENCY 1080 30 29 97 25 24 23 98 Loop 720 60 59 720p 60 59 94 50 through 480i 59 94 gt gt NOTE Technical specifications are subject to change without notice 18 TROUBLESHOOTING GUIDE TROUBLE TROUBLESHOOTING TIP No image on display screen 1 Check that power cord of the M
5. for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal 19 L39ME0330 0
6. ilt Range 3 75 CONNECTING WITH EXTERNAL EQUIPMENT Rear Connection 1 DC 12V 2 HDMI 3 DVI 4 VGA 5 AV1 IN 6 AV1 OUT 7 GND 8 SDI IN 9 SDI OUT REMOTE FUNCTIONS Remote Controller Optional 1 PONER Turns the power ON or OFF There will be a few seconds delay before the display appears 2 SOURCE Selects an input source 3 INFO Displays the information about input source 4 STILL Pauses the picture 5 ARC Aspect Ratio Control Selects a screen ratio 6 APC Auto Preset Control oelects a preset mode 7 ACC Auto Color Control Selects a color mode 8 AUTO Auto geometry adjustment in the RGB PC source 9 HOLD Stops the Trigger amp Auto switching functions 10 MUTE Mutes the sound 11 MENU Activates and exits the On Screen Display 12 EXIT Exits the On Screen Display 13 VOL 4 8 b Change Value in the OSD menu 14 UP DOWN Moves upwards or downwards in the OSD menu 15 ENTER Enters an OSD submenu or accepts your selection 16 4 amp gt Move the cursor the user name CONTROLS AND FUNCTIONS Bottom Key Control SOURCE ACC PICTURE AUTO a MENU 4 4 yl 111111111 gt 1 Selects an input source Enters a submenu or accepts your selection in the OSD menu 2 MENU Activates or exits the OSD Moves previous menu or status in the OSD 3 amp 4 amp PICTUREA Moves another option in the OSD W button i
7. onitor have been connected securely into wall outlet or grounded extension cable or strip Power switch should be in the ON position and LED is lit Check that the Brightness and or the Contrast adjustments of the Display have not been turned down to minimum levels SIGNAL The signal cable should be completely message on screen connected to the video card computer The video card should be completely seated in Its slot and the computer is switched ON Display image is not centered too small or too large in PC mode Push the down front side or Auto key in remote controller Vertical or Horizontal noise is present in the picture Adjust Clock and Phase in the OSD WEEE Symbols Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item
8. s adjust color tones The A button is adjust picture If you press one time you can adjust the brightness and press one more time you can adjust the contrast 5 amp 6 4 amp AUTO gt Adjust the volume or menu settings The button is auto adjustment function in the VGA input 7 911 Turns the power on or off There will be a few seconds delay before the display appears 8 LED Turned on Blue color Turned off Red color 9 IR Sensor Remote controller sensor CONTROLS AND FUNCTIONS INPUT Menu Description DVI D HDMI 1 Press the Source button to enter the input menu VIDEO HD SDI To select the input 2 Press the 4 or Source buttons to select the input source 3 Press the Source button to set the input source or wait for 2 3 seconds on the wanted input source menu xX way is same to select the input source when using the remote controller OSD Menu Description Preset setting all setup for the monitor can be adjusted in the OSD menu On Screen Display To adjust the OSD screen 4 Press the Menu button to enter the OSD menu 5 Press the A buttons to select the desired option The selected option is highlighted 6 Change the value you wish to adjust by using the buttons If you press Menu Key one more time set up menu is appeared Press the A V buttons to select the desired option The selected option is highlighted Change the value you wish to adjust by using the buttons Press
9. sture The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION REDUCE THE HISK OF ELECTRIC SHOCK DO NOT REMOVE REAR NO USER SERVICEABLE PARTS INSIDE REFER TO QUALIFIED SERVICE PERSONNEL This symbol is intended to alert the user to the presence of uninsulated dangerous voltage with in the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons This symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance CAUTIONS CAUTION The power supply cord is used as the main disconnect device ensure that the socket outlet is located installed near the equipment and is easily accessible CAUTION TO SERVICE PERSONNEL POWER SUPPLY 15 USED AS POWER DISCONNECT DEVICE IN THIS PRODUCT UNPLUG THIS PRODUCT FROM THE WALL OUTLET BEFORE REMOVING THE BACK COVER AND SERVICING EMISSION CHARACTERISTICS TESTED BY SEMKO THIS PRODUCT HAS BEEN TESTED AMD HAS SHOWN COMPLIANCE WITH THE NATIONAL SPECIFICATIONS SUCH AS SWEDISH MPR 1990 19 MPR NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel DO NOT USE IN HOSTILE ENVIRONMENTS To prevent shock or
10. the Menu button to exit the OSD menu 10 CONTROLS AND FUNCTIONS A Preset Setting Preset Setting Color Tone Brightness Contrast Sharpness Tint 1 Unavailable in RGB PC 2 Available in VIDEO 3 Unavailable in PAL system Preset Mode otandard Default mode USER1 User can adjust the value in this mode Final Value in Factory IKEGAMI 1 USER2 User can adjust the value in this mode Final Value in Factory IKEGAMI 2 USER3 User can adjust the value in this mode USER4 User can adjust the value in this mode 11 CONTROLS AND FUNCTIONS Color Tone 1 If you press enter button the value is set up in the screen that set up R G B Gain offset as below picture RGB Setting Blue Gain Red Offset Green Offset Blue Offset 12 CONTROLS AND FUNCTIONS B Setup Mode Setup Mode Language Change Name Reset RGB PC Manual Adjust Auto Adjust Phase H Position V Position Frequency Option Function Display picture size oee table below English Francais Deutsch Language Sets the language of the OSD menu Italiano Espanol Portugues or Nederland Change Name Change the user name in Preset Mode oee the table on Next page Resets the monitor settings to the factory default 1 Adjusts the image size to display resolution without overscan oets the image size to wide oets the image size to 4 3
11. the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Only shielded interface cable should be used Finally any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacturer could void the users authority to operate such equipment DOC COMPLIANCE NOTICE This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the radio interference regulation of Canadian Department of communications INSTALLATION Before setting up the monitor ensure that the power to the monitor and other attached devices are turned off X Notice Stand 4 Screws are optional A Connecting the stand 1 Place the monitor with its front facing downward on a soft cloth 2 Assemble the Stand Base into the Stand Body in the correct direction using the included screws in the accessory box Stand Base Stand Body FS4x10 screws 3 Once assembled take the monitor up carefully and face the front side B Positioning your display Adjust the position of the panel in various ways for maximum comfort T
12. ype plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the bsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachment accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped SAFETY INSTRUCTION he apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed no the apparatus 14 Minimum distances e g 10cm around the apparatus for sufficient ventilation WARNING To reduce the risk of fire or electric shock do not expose the apparatus to rain or moi
Download Pdf Manuals
Related Search