Home

Blue&Me - AD FS 2.0 Authentication Web site

1. O Even occasional glances at the instrument panel display can be dangerous and divert your attention from driving Possible Solution Stop your car and attempt to perform the function again manually or continue driving and perform the function using the voice recognition system Problem The system did not respond to a voice command or key press Probable Cause O If you do not speak within a sufficiently brief time after pressing a the system interrupts the voice interaction O If you are speaking too far away from the car s microphone for example if you are sitting in the back seat the system may not recognise your voice command O If you do not wait for the audible signal after pressing a the system will receive only a part of the voice command and will not recognise it O If you do not press a before pronouncing a voice command the system will not activate voice recognition and therefore will not recognise your voice commands O If you do not press MENU to enter the Main Menu it will not be possible to access the Blue amp Me function management menu manually O If you do not act within eight seconds from pressing MENU the system will no longer respond to the pressing of the buttons Possible Solution O Press al and give the voice com mand again Make sure that you speak clearly at a normal volume O Press MENU and try again manually Make sure that you act within approxi
2. ed representative obtaining and using technical information collected by them in any manner within the framework of the assis tance services for the SOFTWARE The Software Suppliers of Fiat Auto S p A their related companies and or their appointed rep resentative may use such information only in order to improve their products or to provide you with personalised services or tech nology The Software Suppliers of Fiat Auto S p A their related companies and or their appointed representative may reveal this information to others but not in such a way that you can be identified Components of Internet Based Services The SOFTWARE may contain components that allow and facilitate the use of In ternet based services You understand and accept that the Software Suppliers to Fiat Auto S p A their related companies and or their appointed representative could automatically check the version of the SOFTWARE used by you and or its components and could provide updates or supplements to the SOFTWARE which may even be automatically downloaded onto your SYSTEM Software Additional Services The SOFTWARE will be able to allow Fiat Auto S p A the Software Suppliers for Fiat Auto S p A their related companies and or their appointed representative to provide you with or make available to you updates supple ments complements or components of Internet based services for your SOFTWARE after the date when you obtained your first copy of the SOFTWARE
3. lave amp mE Gee EME The Innovative Telematic Solution for cars based on Microsoft Auto SUMMARY GENERAL INFORMATION sessssessssssseecsssseesessssneessens Hands free system ou SMS message reader Media Player Road safety lt oisce eccsssssscesussctesactcneantesteicerassctsamreasnrunosarccvanscerantees DISPLAY AND BUTTONS ON THE STEERING WHEEL ssscsccssscsccsssscsscccosscsseprasserucesitscctusssess HANDS FREE FUNCTION QUICK GUIDE Preparing your mobile phone phonebook Getting to know voice commands Pairing your mobile phone Making a phone Call sss sicusscsisssenscsconcovsevenssensucsensessuusensepuasecrscsse QUICK GUIDE TO SMS MESSAGE READER 4 QUICK GUIDE TO THE MEDIA PLAYER nsss USING Blue amp Me ow Steering wheel controls Car radio controls NO U1 Ww w HANDS FREE FUNCTIONS nnenocssnensnusannenien Making a phone call ssssssssssssssreeresss Managing incoming calls Managing calls in progress Conference call FUNCION eesseessseessstesssetesssntessseessseees SMS MESSAGE READER FUNCTIONS ees Reading the last message received INDOX rarose Managing SMS messages 04 Deleting all messages ou Notification Settings aiscsssccscsiccassaceetssccussiessiorsecsbaceaniencevadbacsnctss MEDIA PLAYER FUNCTIONS essensen Connecting a USB device to Blue amp Me Managing the m
4. s hands free system 23 BLUE amp ME BLUE amp ME 24 Transferring a phone conversation from the hands free system to your mobile phone To transfer a phone conversation from the hands free system to your mobile phone press SRC OK You can talk on your mobile phone and continue to use the controls on the steering wheel In particular if you have more than one active conversation you can press MENU to switch from one phone call to the other press MENU for more than one second to end the con versation Putting a phone call on hold To put a call in progress on hold and dis able the microphone in order to be able to talk without being heard by the per son you are talking to press JH ESC CONFERENCE CALL FUNCTION only with Bluetooth technology phones that support this function The Telephone Conference function al lows you to make a phone call to a third person during an active call In this way you can speak with both people at the same time To start a Conference while you are en gaged in a phone conversation call the second contact as described in the section MAKING A PHONE CALL When Conference Call function is active the display will show CONFERENCE Once the conference is activated hold ing down the MENU button will end both calls Note A third incoming call received during a conference call cannot be managed SMS MESSAGE READER FUNCTIONS only for mobile phones which
5. u Press am and say Media Player then USB options and finally Albums Manually scroll through the available albums To select the album displayed press SRC OK or MENU Scroll through the tracks in the al bum To play the whole album se lect the PLAY ALL option and press SRC OK or MENU To play just one track in an album select the track title and press SRC OK or N MENU Note If your USB device contains many audio files the ALBUMS menu may be subdi vided into alphabetical submenus An alphabetical submenu may display just the first letter of the tracks that it contains e g A F or it may display the first two letters e g Aa Ar 31 BLUE amp ME BLUE amp ME 32 Selection by playlist Playlists stored on your USB device can be displayed with the PLAYLISTS menu Y To select a playlist using manual in z teraction proceed as follows Activate the Main Menu select the MEDIA PLAYER option then press SRC OK or MENU Select USB OPTIONS then press SRC OK or VMENU Select the option PLAYLISTS then press SRC OK or MENU Scroll through the available playlists To play the playlist ul press SRC OK or N MENU Or using voice interaction We Press a and say Media Player then USB options and finally Playlists Manually scroll through the available playlists To play the displayed iii press SRC OK or N MENU For more information on creat
6. Loop track Cycle e Loop on e Loop track on e Loop off Loop track off e Cycle off e Cycle off e Autoplay on e Autoplay media on e Autoplay music on Autoplay e Autoplay off Autoplay media on e Autoplay music on Autoplay e Now playing e What s playing e What is playing e What s this track Turns the loop function on Turns the loop function off Automatically starts audio playback when a USB device is plugged in Stops automatically playing the audio track when the USB device is plugged in Shows information on the track being played continued Z gt 53 BLUE amp ME BLUE amp ME 54 lt gt continued u u dvanced USB options ther options e Play anything e Random e Play something Folders Folder Browse folders e Artists e Artist e Browse artists Genres Genre Browse genres Type of music Styles Music styles e Types Music types Albums Browse albums e Playlists e Playlist e Browse playlists Starts playing all digital audio tracks e USB media settings USB settings Opens the MEDIA PLAYER settings menu Opens the Media Player FOLDERS menu Opens the Media Player ARTISTS menu Opens the Media Player GENRES menu Opens the Media Player ALBUMS menu Opens the Media Player PLAYLISTS menu Table of setting functions voice commands e Setup e Setup menu e Setting
7. SRC OK or N MENU Select USB OPTIONS then press SRC OK or MENU Select GENRES then press SRC OK or MENU Scroll through the available genres To play all the tracks of the dis Re genre press SRC OK or MENU 4 Or using voice interaction e Press a and say Media Player then USB options and finally Genres Manually scroll through the available genres To play all the tracks of the dis layed genre press SRC OK or IMENU Note If your USB device contains many audio files the GENRES menu may be subdi vided into alphabetical submenus An alphabetical submenu may display just the first letter of the tracks that it contains e g A F or it may display the first two let ters e g Aa Ar Selection by album To select an album using manual in teraction proceed as follows Activate the Main Menu select the MEDIA PLAYER option then press SRC OK or MENU Select USB OPTIONS then press SRC OK or MENU Select the ALBUMS option then press SRC OK or WWMENU Scroll through the available albums To select the album displayed press SRC OK or N MENU Scroll through the tracks in the al bum To play all tracks in an album select the PLAY ALL option and press SRC OK or MENU To play an album select the album then press SRC OK or MENU To play just one track in an album select the track title and press SRC OK or N MENU gt Or using voice interaction
8. a name stored in the phonebook and the paired mobile phone does not have a caller ID feature O The caller has blocked caller ID to prevent the display of their name and or phone number phonebook downloading attempts has been exceeded O The Blue amp Me syncML profile configuration on the mobile phone is not present or not correct O The maximum number of failed see SETTING FUNCTIONS paragraph Repeat the pairing procedure When entering the PIN check that the PIN you are entering on the mobile phone is the same shown on the instrument panel display gt SETTING FUNCTIONS PAIRING YOUR MOBILE PHONE Enter a contact in your mobile phonebook for the incoming call then download the phonebook contact again In this case nothing can be done and the message will always appear Check whether your mobile phone is supported in the Blue amp Me Compatibility Supported phone list section on the www fiat com web site Or configure syncML on your mobile phone following the corresponding instructions and setting it according to the suggestions shown on the above web site Delete users using the settings Or manually download the phonebook 59 BLUE amp ME BLUE amp ME 60 Problem Probable Cause The display shows i ONLY WHEN STATIONARY O Some Blue amp Me functions which require the user to pay attention to the instrument panel display are only available when the car is stopped
9. otherwise say No If the person has several phone numbers the system will ask which phone number you would like to call e g Call John at Work or at Home Answer with the type of phone number required e g at Home If the person has several phone numbers but the type is missing the system will display the contact and a list of related phone numbers To call the displayed phone number say Call If the contact is recognised correct ly but the phone number is wrong you can scroll through the phone number list manually by pressing A or V When you have identified the number you want press WMENU or SRC OK to make the call To end the call press WMENU for more than one second Tip When you call a contact with multiple phone numbers indicate the type of num ber you want to call in the voice command at Home at Work on at Mobile This will reduce the number of steps required to make the phone call Dialling a number using voice commands u gt To dial a phone number using voice interaction proceed as follows Press a and say Dial The system will reply Number please Give the phone number as a se quence of single digits e g 0 I 2 3 A 5 6 ae 38 ga plus hash or star For example 0113 290103 is pro nounced zero one one three two nine zer
10. the same rule applies for the other lower levels 2 and 3 gt For a list of all available keywords re fer to the chapter LIST OF AVAILABLE VOICE COMMANDS To listen again to the last message given by the system press amp for more than one second or briefly press al and say Repeat The hands free system may issue voice announcements A voice announcement is a spoken mes sage initiated by the system To cancel a voice announcement press IESC or press a and say Cancel A voice interaction is a exchange of mes sages commands between the system and the user To initiate a voice interaction press a and issue a command To inter rupt an interaction and start a new one press a at any time during the interac tion and issue a voice command To stop an ongoing interaction press PIESC You will hear an audible signal indicating that voice recognition has been deactivated The help function can give the list of com mands available to you at any time de pending on the level that you are currently in To use the help system say Help Listen to the list of available commands and decide which command to give to the system Adjust the volume to a level that is com fortable and safe while the car is in mo tion To adjust the preset Blue amp Me volume refer to the SPEECH VOLUME function section in the car radio instruction book let To temporarily adjust the volume of the current pho
11. Auto S p A and indicated in the SYSTEM manual For any questions concerning this EULA or if you want to contact Fiat Auto S p A for any other reason please refer to the suggestions indicated in the SYSTEM documentation Exclusion of Liability for Certain Damages EXCEPT WHERE PROHIBITED BY LAW THE SOFTWARE SUPPLIERS TO FIAT AUTO S p A AND THEIR SUBSIDIARIES WILL NOT BE LIABLE FOR ANY INDIRECT SPECIAL NON CONTRACTU AL OR ACCIDENTAL DAMAGE DERIVING FROM OR RELATED TO THE USE OR MANAGEMENT OF THE SOFTWARE THIS RESTRICTION WILL ALSO APPLY IN THE EVENT THAT ANY REMEDY FAILS IN ITS MAIN INTENTION UNDER NO CIRCUMSTANCES WILL THE SOFTWARE SUPPLIERS OF FIAT AUTO S p A AND OR THEIR SUBSIDIARIES BE LIABLE FOR SUMS EXCEEDING TWO HUNDRED AND FIFTY US DOLLARS 250 00 USD FOR ANY APPLICABLE RESTRICTED WARRANTIES AND SPECIAL RULES OF ITS OWN JURISDICTION WE ASK YOU TO REFER TO YOUR WARRANTY BOOKLET WHICH IS INCLUDED IN THE PACKAGE OR WAS PROVIDED TO YOU WITH THE SOFTWARE S PRINTED MATERIAL Fiat Group Automobiles S p A Parts amp Services Technical Services Service Engineering Largo Senatore G Agnelli 3 10040 Volvera Torino Italia Print No 603 95 987 04 2012 Edition The data contained in this publication is intended merely as a guide Abarth reserves the right to modify the models and versions described in this booklet at any time for technical and commercial reasons If you have any further questions please consu
12. DELETE ALL then press SRC OK or MENU The system will ask DEL MESS Press SRC OK or N MENU to confirm or press IESC to cancel gt Or using voice interaction Press 8g and say Message read er After the audible signal say Delete all Blue amp Me will ask you Delete all messages from car Say Yes to confirm the deletion of all SMS messages from the system or say No to cancel the deletion SIGNAL SETTINGS You can set notification modes for the Blue amp Me SMS message reader There are three possibilities O VIS ACOUST Blue amp Me signals the receipt of a new message both on the instrument panel display and by an acoustic signal Blue amp Me will also offer to read the message O VIS SIGNAL Blue amp Me communicates the re ceipt of a new SMS message only vi sually through the instrument panel display The message received can be read later see READ LAST MESSAGE RECEIVED and INBOX paragraphs O READER OFF Blue amp Me deactivates the SMS Message Reader so that the receipt of a new SMS message will not be in dicated at all and the message will not be forwarded system on receipt Using manual interaction activate the Blue amp Me Main Menu select the MESS READER option then press SRC OK or N MENU Se lect the option SIGNAL TYPE and scroll through the three available options with the buttons A or F select the desired option and
13. Me inbox O Accepting a call you can accept an incoming call by pressing the WMENU button on the steering wheel O Conference Call you can call anoth er contact with a phone conversation al ready in progress with Bluetooth phones that support this function O Call waiting while engaged in a phone conversation you can receive notifica tion of another incoming phone call an swer the incoming phone call and switch between the calls Call waiting is only supported by some of the com patible mobile phones O Refuse a call you can refuse an incoming call by pressing the key N MENU SMS MESSAGE READER only for mobile phones which support this function A speech synthesiser integrated with Blue amp Me can automatically read in coming messages on your car radio re ceived on a mobile phone equipped with Bluetooth technology Abbreviations and emoticons in the text message are also interpreted The SMS message reader functions are managed by the steering wheel controls or Blue amp Me voice commands The Blue amp Me SMS message reader al lows you to O Be informed by means of a warning message on the instrument panel dis play of a new SMS message on your mobile phone with Bluetooth the number name of the sender is dis played and Blue amp Me will also ask whether to read the message to you Manage the inbox on your mobile phone connected to Blue amp Me O Re read
14. Write foreign names according to the way in which they are pronounced ac cording to the rules of the Blue amp Me language set on your car For example enter Tanja as Tanya to improve recognition accuracy and also to obtain the correct pronunciation by the system O When adding or editing contact entries insert the appropriate accent marks when the name requires these marks to be properly pronounced and recog nised by the system For example write Nicolo Rebora as Nicol R bora to obtain the correct pronunciation O When you add or amend names in the phonebook remember that some isolat ed upper case letters can be read as ro man numerals e g V can be read as five O When calling contacts using voice recog nition do not include abbreviated names or the middle initials of your contacts Notes O You are only required to pair your mo bile phone a single time O You can pair up to five mobile phones to be used one at a time O To connect a previously paired phone to Blue amp Me you must activate the Bluetooth setting on the phone to be connected O Before you transfer the names from your mobile phone to the hands free system make sure the name of each person is unique and clearly recognis able so that the voice recognition sys tem functions properly O The system will download only valid contact entries i e those with a name and at least one telephone number 3
15. ae or rie ant sae z a e E TT eran ee a E TEEN 16 kHz 22 05 kHz and 24 kHz The following bit rates are supported 16 kbps 32 kbps 64 kbps 96 kbps 128 kbps and 192 kbps Audio in digital format without data compression MPEG 4 files sampling frequencies between 22 05 kHz and 48 kHz The following bit rates are supported 8 kbps 256 kbps Media Player does not support audio files compressed with other formats If there are unsupported audio files on the USB device they will be ignored Supported playlist formats Media Player supports the playback of playlists in the following formats wpl files based on Windows which contain a playlist the capacity limit of the playlist in this format is 300 kb You can create wpl playlists by using Microsoft Windows Media Player Media Player does not support nested or connected playlists Both relative and ab solute paths to songs are supported in the playlists Media Player does not support playlists generated by a software application based on criteria or special preferences Media Player will play playlists that include paths that lead to digital audio files in the folder For more information on creating playlists for Blue amp Me refer to the PRACTI CAL TIPS FOR USING MEDIA PLAYER SECTION Note on brands Microsoft and Windows are registered trademarks of Microsoft Corporation Sony is a registered trademark of Sony Corporation Er
16. immediately after con necting for the first time This message will no longer be heard at subsequent pairing or connecting procedures BLUE amp ME BLUE amp ME 12 O Blue amp Me will ask if you would like to copy the phonebook of the phone that you have just paired to Blue amp Me You are advised to copy it To start copying the phonebook say Yes otherwise say No O On some compatible mobile phones the names in the directory are not copied automatically but have to be transferred by the user using the mobile phone key pad If prompted byBlue amp Me car ry out this procedure following the in structions specific to your mobile phone and press MENU when you have finished MAKING A PHONE CALL Imagine that John is one of the contacts stored in your phonebook To call John proceed as follows O Press the steering wheel button al and say Call John O If the name is recognised the system will display the information for the con tact on the display If there is just one phone number for John in your phonebook the system will ask if you would like to call John To start the call say Yes otherwise say No If John has several phone numbers the system will ask which phone number you would like to call e g Call John at work or at home Answer with the type of phone number required e g at Home If John has several phone numbers but the
17. nition you can perform system functions by giving voice commands which are recognised by the system When the sys tem recognises a voice command it will respond with the appropriate action Voice recognition is an easy and conve nient way to use Blue amp Me All the system functions are available with in the Blue amp Me Main Menu When the car is not moving you can scroll through the menu using both the buttons on the steering wheel and voice commands When you are travelling you can inter act with Blue amp Me using buttons on the steering wheel or voice commands rele vant only to phone functions LAST CALLS and PHONEBOOK and the Media Player To activate settings functions when travelling you can only use voice commands The hands free function enables the fol lowing operations O Calling a contact in the phonebook using voice commands you can call a contact in your mobile phone phone book using your voice You can also call someone in your phonebook by se lecting from those that appear on the display of the instrument panel This function requires your phonebook to be copied onto the car s hands free system O Dialling a telephone number us ing voice commands you can dial a phone number by saying the digits O Calling the sender of an SMS mes sage you can directly call the phone number of the sender of the last message received or a message already received and saved in the Blue amp
18. or to play them only on your command To get to know all the functions and ways of using the Media Player refer to the chapter MEDIA PLAYER FUNCTIONS gt If you encounter difficulties with using the Media Player refer to the chapter ME DIA PLAYER TROUBLESHOOTING 13 BLUE amp ME BLUE amp ME 14 USING Blue amp Me STEERING WHEEL CONTROLS The controls on the steering wheel see fig 1 are used with the hands free function to activate voice recognition to use Media Player functions or to select a Blue amp Me menu option Certain buttons have multiple functions which depend on the state of the system in a given moment The function chosen in response to a key press depends in some cases on the du ration of the key press short or long gt For further information refer to the chapter DISPLAY AND THE STEERING WHEEL CONTROLS Note The instructions on the use of the system through manual controls are shown in the text by the symbol Yy CAR RADIO CONTROLS In Media Player mode the buttons A V lt 4 gt on the front of the radio activate A Y Select previous next folder artist genre album depending on the se lection mode enabled lt P Play previous next track VOICE COMMANDS Voice commands can be given by the dri ver who does not need to change their normal driving position to be heard by the system The microphone is properly located and oriented for this purp
19. phone call g To answer a call press MENU O To end the call press MENU for more than one second Rejecting a call O To reject a call press N MENU for more than one second Ignoring a call O To ignore the phone call and mute the ring tone press J JESC Press J ESC again to go hear the ring tone again Answering an incoming call during a conversation To answer an incoming call whilst anoth er conversation is in progress press N MENU The system will switch to the incoming phone call and put the current phone conversation on hold Note Certain mobile phones can transmit your contacts ring tones to the hands free sys tem In this case the incoming phone calls will use customised ring tones on your mobile phone MANAGING CALLS IN PROGRESS Transferring a call from your mobile phone to the hands free system If you enter the car during a mobile phone conversation you can transfer the phone conversation to the car s hands free system Proceed as follows O Get into the car and turn the ignition key to MAR to activate the hands free system O The system will communicate with the previously paired phone confirming the possibility of activating the hands free system O To transfer the conversation to the hands free system activate the function as required by your mobile phone This process is different for each mobile phone O The phone conversation is transferred to the car
20. phonebook to the system to use this feature To call a contact in your phonebook using manual interaction proceed as follows Activate the Main Menu by press ing MENU Select CONTACTS and then press SRC OK or WMENU Press A or to select the alpha betic group to which the name of the person belongs press SRC OK or N MENU and then select the de sired name If there is only one phone number for the person you wish to contact press SRC OK or MENU to make the call If there are several phone numbers for the person you wish to contact press SRC OK or MENU to ac cess the different contact numbers then select the one you wish to con tact using A or and press SRC OK or MENU to make the call To end the call press MENU for more than one second gt Or using voice interaction u Imagine that you would like to call the contact John in your mobile phone phonebook Press a and say Call John or Call John on at Mobile in the voice command the word Mo bile represents the type of phone number you would like to call The phone number type could also be at Home at Work or on at Other If the name is recognised the sys tem will display the recognised con tact s information John in the ex ample on the display screen If the person has just one phone number the system will ask if you would like to call them To start the call say Yes
21. phones with phonebook management O When the system asked The data from the phonebook will now be copied onto the system Continue you replied No J You did not download the phonebook using the SETTINGS menu O The downloaded phonebook has been deleted For mobile phones with single contacts management O When the system asked The data from the phonebook will now be copied onto the system Continue you replied No O You have not transferred contacts to the system using the ADD CONTACTS PROCEDURE O The downloaded phonebook has been deleted Possible Solution For mobile phones with phonebook management O Use the option PHONEBOOK in the SETTINGS menu to download the phonebook O Enter the contacts data in your mobile s phonebook and then download the phonebook gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK For mobile phones with single contact management O Use the ADD CONTACTS option in the SETTINGS menu to transfer contacts in the phonebook on your mobile phone to the system gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK Problem Probable Cause Possible Solution The display shows PHONEBOOK EMPTY For mobile phones with phonebook management O You answered Yes to The data from the phonebook will now be copied onto the system Continue but the downloaded phonebook does not contain valid contacts O You h
22. previously received and saved SMS messages O Make a voice call to the sender of the received SMS message by means of the steering wheel controls or voice com mands O Delete single SMS messages or the en tire SMS inbox by means of the steer ing wheel controls or voice commands Blue amp Me can also recognise and read abbreviations e g LOL will be read Laughing out loud and interpret the most common emoticons e g will be read as Smiley used for texting today BLUE amp ME BLUE amp ME MEDIA PLAYER With the Blue amp Me Media Player you can play via the car sound system the dig ital audio files stored on a USB device by simply connecting it to the USB port lo cated in the car In this way you can play your personal music collections while you are driving O iPod player see Management of au dio files from iPod devices With the Media Player you can O Digital audio playback you can play back your digital audio files or a cus tomised playlist see Compatible digi tal audio files O Audio selection by category you can play back all audio in a certain cat egory e g album artist or genre O Using the playback functions whilst playing tracks you can use other func tions such as Play Stop Next Previous Shuffle and Track loop Note Media Player does not support DRM Dig ital Rights Management protected audio files Unsupported audi
23. sec onds We Note This function is only available with voice interaction Press a and say Now playing When a digital audio track starts playing the information on the track will be au tomatically shown on the display Pause To pause the track you are listening to press ESC or the MUTE button on the front of the stereo To resume listening to a track that you have paused press ESC or the MUTE button on the front of the stereo Stop To stop playing a track say Stop To resume say Play Note The Play command is only available if playback has been stopped using the Stop command Next track To play the next track using manu al interaction proceed as follows Whilst listening to a digital track press A steering wheel controls or car radio control Or using voice interaction u While listening to a digital track press aM and say Next Previous track To play the previous track using O manual interaction proceed as follows Whilst listening to a track press W steering wheel controls or lt car radio control g Or using voice interaction l ia While playing a digital track press a and say Previous Note If the command Previous track is given manually after the first three seconds of the track the same track will be played again If it is given within the first 3 sec onds the previous track wi
24. support this function If your r mobile phone equipped with Blue tooth technology supports the SMS mes sage reader function when a new SMS mes sage is received Blue amp Me will notify you with an acoustic signal and ask you if you want to read it depending on the notification options set To see the list of mobile phones and functions supported consult the dedi cated website www fiat com Blue amp Me section or call Customer Services on 00800 222784 00 gt For information on the notification op tions refer to the paragraph Notification settings We If you want Blue amp Me to read y the SMS message received with manual interaction press SRC OK or MENU The SMS message will be read taking into account any abbreviations and emoticons with in the text If you do not want to read the SMS message press J ESC Blue amp Me will not read the message but save it so that it can be read an other time for further information refer to the Read last message received paragraph Or using voice interaction if you say Yes Blue amp Me will read the text of the message tak ing into account any abbreviations present but if you do not want to read the message just say No the system will save it to give you the possibility of reading it later for further information please refer to Read last message received paragraph READING THE LAST MESSAGE RECEIVED When an SMS messa
25. type of phone number is missing the sys tem will display the selected contact and a list of related phone numbers The hands free system will ask if you would like to call the phone number displayed If the number displayed is the one you wish to call say Yes otherwise say No If this is the correct contact but the wrong number say Forward or Backward to see the other phone numbers for this person To call the displayed phone number say Call You can also scroll through the phone number list manually by pressing the A or W buttons on the steering wheel until you find the required number When you do press MENU or SRC OK to make the call O To end the call press MENU for more than one second gt If you encounter difficulties with using the hands free system refer to the chap ter HANDS FREE TROUBLESHOOT ING QUICK GUIDE TO SMS MESSAGE READER only for mobile phones which support this function If your Bluetooth phone supports this function when you receive a new SMS message Blue amp Me alerts you with an audible signal and asks you if you want to read it O say Yes or press the MENU or SRC OK buttons the system will read the last message received O say No or press the button SF ESC the system will store the message and you can read it later To get to know all the functions and ways of using the SMS message reader refer to the chapter SM
26. 9 BLUE amp ME BLUE amp ME 40 O If you want to re pair your mobile phone delete the old pairing relationship first During this operation all user data will be deleted To delete the old pairing rela tionship use the menu option USER DATA DELETE USERS Delete the Blue amp Me device from the list of Bluetooth devices on your mobile phone following the instructions in your mobile phone manual O If you download a phonebook with more than 1000 contacts the system may operate more slowly and voice recognition of the names in your phone book may be impaired O If the pairing relationship is accidental ly deleted the pairing procedure will have to be repeated MANAGING USER DATA You can make adjustments to the user da ta saved in the hands free system Specif ically you can reset all user data for paired phones delete the phonebook or reset both paired phone data and the phone books downloaded to the system In this way the system is restored to its initial set tings You can also download either the entire phonebook or single contacts from your mobile phone to the system if you chose not to download the phonebook during the phone pairing procedure You can make adjustments to the data used by the system with the option USER DATA Y We To open the USER DATA menu using manual interaction proceed as follows Activate the Main Menu by press ing MENU and select SET TINGS by pressing SRC O
27. Additional Components If Fiat Auto S p A provides you with or makes available Additional Components without providing any other EULA conditions the terms of this EULA will also apply to them If Software Suppliers to Fiat Auto S p A their related companies and or their appointed representative make additional com ponents available to you and together with them no other EULA condition is provided then the terms of this EULA would ap ply to them except for the fact that the Suppliers Software to Fiat Auto S p A or their subsidiary that provides the Additional Components will be considered as the licenser for the Additional Component Fiat Auto S p A the Software Suppliers to Fiat Auto S p A and their related companies and or their appointed representative reserve the right to terminate any service based on the Internet provided to you or made available through the use of the SOFTWARE Links to Third Party Websites The SOFTWARE may give you the possibility through the use of the SOFTWARE to access third party websites Third party websites do not fall within the framework of control by the Software Suppliers to Fiat Auto S p A their related companies and or their appointed representative Neither the Software Suppliers of Fiat Auto S p A nor their relat ed companies or their appointed representative shall be responsible for i the content of any third party websites any links con tained in such sites or any chang
28. Deleting all paired users will entail a new pairing procedure for the mobile phone 4 BLUE amp ME BLUE amp ME 42 Delete the phonebook The phonebook downloaded to the system can be deleted using the USER DATA menu To delete the phonebook using man ual interaction proceed as follows Select the DELETE PHONE BOOK option then press SRC OK or MENU The system will display the message DEL PHONEBOOK To con firm press SRC OK or MENU Or using voice interaction t Press al say Settings then af ter the message supplied by the sys tem say Delete phonebook The system will ask Delete the copy of the phonebook from the car To confirm say Yes Copying the phonebook If you chose not to download the phone book during the phone pairing procedure or if you have recently deleted the phone book the USER DATA menu will con tain the COPY PHONEBOOK option A To download a paired mobile phone s phonebook using manual interaction proceed as follows Select the COPY PHONEBOOK option then press SRC OK or N MENU Or using voice interaction Press a say Settings and after the message provided by the system say Download phonebook Adding contacts If your mobile phone does not support automatic downloading during phone pairing the USER DATA menu will contain the ADD CONTACTS option A To copy contacts from your mobile pho
29. If your USB device has folders containing tracks saved on it they will be visible in the menu FOLDERS function not avail able for iPods To select tracks contained in folders through manual interaction proceed as follows Activate the Main Menu select the MEDIA PLAYER option then press SRC OK or MENU Select USB OPTIONS then press SRC OK or MENU Select the FOLDERS option then press SRC OK or MENU Scroll through the available folders To play the entire contents of the folders select PLAY ALL then press SRC OK or MENU To display tracks in the selected folder press SRC OK or WMENU Scroll through the tracks contained in the selected folder To play a track select the title and press SRC OK or MENU 29 BLUE amp ME BLUE amp ME Or using voice interaction Press m and say Media Player then USB options and finally Folders Scroll through the available folders manually To play all tracks contained in the folders select PLAY ALL and then press SRC OK or N MENU To display tracks in the selected folder press SRC OK or MENU Scroll through the tracks contained in the selected folder To play a track select the title and press SRC OK or MENU For further details on customising the FOLDERS menu see PRAC TICAL TIPS FOR USING THE ME DIA PLAYER Selection by artist To select all the tracks by a partic Ww ular artist using manual interaction Acti
30. K or N MENU Select the USER DATA option then press SRC OK or S MENU Or using voice interaction Press a and say Settings and at the end of the message supplied by the system say User Data In the menu USER DATA you can perform the functions described below Deleting paired users In the menu USER DATA you can delete the pairing relationships created After you delete the pairing relationship you cannot use an unpaired phone with the hands free system nor its phonebook until you recreate a pairing relationship for it Bear in mind that this operation deletes all the pairing relationships on the system To delete the pairing data of all users wy using manual interaction proceed as follows Select the DELETE USERS option then press SRC OK or MENU The system will display the message DELETE USERS To delete the user data confirm by pressing SRC OK or S MENU 1 Or using voice interaction Press al say Settings and at the end of the message provided by the system say Delete users The system will ask Delete all paired users To confirm say Yes Notes O Always remember that if a mobile phone is paired with the system while another phone is connected the con nection with the current phone is in terrupted to establish the connection with the new phone O It is not possible to delete a single pair ing relationship unless it is the only one O
31. LL TABLE OF HANDS FREE VOICE COMMANDS e Dial a number Dial e Call Activates the voice recognition of a phone number l ELLOELULLUCE One Three Four e Five e Six Seven Eight Nine Zero e Plus e Star pn Enters digit Enters digit 2 Enters digit 3 Enters digit 4 Enters digit 5 Enters digit 6 Enters digit 7 Enters digit 8 Enters digit 9 Enters digit 0 Enters symbol Enters symbol Hash Pound Enters symbol Delete e Back Deletes the last group Delete Back of digits entered Deletes all groups of digits entered m Start over with possibility of inserting a new number Repeats the telephone number Repeat entered and recognised by the hands free system gt oa Calls the number entered by voice rifle continued gt 49 BLUE amp ME BLUE amp ME lt gt continued Calls the selected contact at Work Office Call Name Call Name i AO Calls the selected contact at Home Calls a contact Mobile Starts calling a name in the The Name keyword represents z ma phonebook mobile phone contact the name of a contact as stored Cellular Calls the selected contact on Mobile transferred to the hands free in your pho
32. Me will start playback automatically gt For more information refer to the chapter SETTING FUNCTIONS ME DIA PLAYER When the creation of the multimedia li brary is over it is possible to use Blue amp Me to display and select the tracks pre sent and to activate playback Note For the best use of Blue amp Me it is rec ommended to use USB devices with max imum capacity of 32 GB MANAGING THE MEDIA LIBRARY With the media player you can select the digital audio on your USB device using voice recognition or the steering wheel controls You can scroll through the audio files by folder artist genre album or playlist You can use voice recognition to choose one of these categories Once you have se lected the category that you want use the manual controls to select a file Enter multimedia data for each track e g title artist album genre to make brows ing your media library easier Note Not all formats can contain multimedia data Of the formats recognised by Blue amp Me mp3 wma and mp4 can contain multimedia information while the wav format cannot It may also be the case that multimedia information has not been entered for an audio file that supports it In these cases scrolling through audio files can only take place by folder if organised in folders gt For more information refer to the sec tion PRACTICAL TIPS FOR USING THE MEDIA PLAYER Selection by folder
33. S MESSAGE READER FUNCTIONS gt If you encounter difficulties using the SMS message reader refer to the SMS MESSAGE READER TROUBLESHOOT ING QUICK GUIDE TO THE MEDIA PLAYER Proceed as follows to start playing the dig ital audio files stored on your USB device O Copy the tracks to your USB device see paragraph Compatible digital au dio files O USB devices without USB cable sim ply connect the USB device directly or with an extension lead to the USB port on the car see fig 1 O USB devices with USB cable use the ca ble to connect the USB device to the USB port on the car see fig 1 O Turn the ignition key to MAR Blue amp Me will automatically start to play your digital tracks selecting them from the library that is created when the USB device is connected O The time required by Blue amp Me to recognise your USB device and start playback may depend on the type of de vice its capacity and its contents O After Blue amp Me has created the li brary of your digital audio files you can select and play tracks albums artists and playlists by interacting manually or ver bally with Blue amp Me Creating the li brary may require a few minutes if your USB device contains many files O iPod player see paragraph Managing audio files from iPod devices O You can also decide whether to play au dio files automatically when the USB iPod device is connected
34. Select the LAST CALLS op tion and then press SRC OK or N MENU O The system will present a list of phone numbers Use A or V to select the desired phone num ber then press SRC OK or N MENU to make the call O When you have finished your conversation press N MENU for more than one second to end the call Or using voice interaction To call back the last incoming phone number press a and say Call back The system will display information about the last caller and ask if you would like to call them To start the call say Yes otherwise say No To redial the last phone number you called say Redial The system will display information about the last contact you called and will ask if you would like to call them To start the call say Yes otherwise say No The Recall command can also be used In this case the system will ask Redial or callback To call back the last person you phoned say Outgoing call To call the last person who phoned you say In coming call MANAGING INCOMING CALLS With the hands free function you can re spond to incoming calls using the controls on the steering wheel When a phone call is received the system will display informa tion about the caller s identity if available The incoming phone call will be indicated with the customised ring tone from your phone if this function is available on your phone Answering a
35. amp ME 74 Single EULA The documentation relating to this SYSTEM and intended for the final user may contain multiple versions of this EULA such as for example several translations and or several multimedia versions that is in the documentation and in the soft ware Even if you receive several versions of the EULA your user license will apply to one 1 copy of the SOFTWARE only Leasing prohibited Without authorisation by Fiat Auto S p A hiring renting leasing or loaning the SOFTWARE is prohibited Transfer of the SOFTWARE Pursuant to this EULA you can definitively transfer all your rights only and exclusively by sell ing or transferring the SYSTEM provided that you do not retain any copies and transfer the entire SOFTWARE including all its components the printed and IT material and any updates this EULA and if applicable the Certificate of Authenticity and that the recipient accepts the terms of this EULA If the SOFTWARE is an update the transfer must include all previous versions of the SOFTWARE Termination Without prejudicing each other s rights Fiat Auto S p A or the Software Suppliers to Fiat Auto S p A can termi nate the EULA if you do not respect the terms and conditions contained within it In this case you will have to destroy all copies of the SOFTWARE and all its components Data usage consent You consent to the Software Suppliers for Fiat Auto S p A their related companies and or their appoint
36. ave used the option PHONEBOOK in the SETTINGS menu but the mobile phone phonebook does not contain valid contacts For mobile phones with single contact management O When the system asked The data from the phonebook will now be copied onto the system Continue you answered Yes but did not transfer any valid contacts during the ADD CONTACTS procedure O You used the ADD CONTACTS option but did not transfer any valid contacts to the system For mobile phones with phonebook management O Enter valid names a name and at least one phone number in the phonebook of your mobile phone then download the phonebook gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK For mobile phones with single contact management O Download the phonebook again and make sure to send valid contacts to the system using your mobile phone when prompted O Use the option ADD CONTACTS in the SETTINGS menu to send contacts from your mobile phone to the hands free system gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK 57 BLUE amp ME BLUE amp ME 58 Problem Probable Cause Possible Solution The display shows NO PHONE The display shows TEL DISCONN The display shows PAIR FAILED O The paired mobile phone is turned off O The paired mobile phone is not within range of the system the mobile phone should be located within approximately 10 m of the system O The connection usin
37. ay have entered the option READER OFF by mistake from the Signal settings menu Blue amp Me can read and store the last 20 SMS messages received while the mobile phone is connected to the system Messages received in other contexts will not be transferred to Blue amp Me Possible Solution Check that your mobile phone supports the function of transferring SMS messages via Bluetooth or for more information refer to the LIST OF PHONES SUPPORTED BY BLUE amp ME section or the Blue amp Me section of www fiat com In the signal settings menu set VIS ACOUST or VIS SIGNAL gt SMS MESSAGE READER FUNCTIONS SIGNAL SETTING IT IS possible to delete SMS messages saved by Blue amp Me gt SMS MESSAGE READER FUNCTIONS MANAGING SMS MESSAGES and DELETING ALL SMS MESSAGES PARAGRAPHS Problem Probable Cause Possible Solution Some SMS messages or parts of them are not read or are not read correctly by the Blue amp Me hands free system The Blue amp Me SMS message reader displays the sender s phone number rather than the name Sometimes it is not possible to call the sender of the SMS message received Some special characters in the SMS message received cannot be interpreted by Blue amp Me Probably in the mobile phone pairing phase you decided not to download the phonebook or if your mobile phone only supports the management of individual contacts you decided to
38. bile phone After this procedure Blue amp Me will automatically connect to your phone each time you get into the car and turn the ignition key to MAR You can pair your mobile phone using the option PAIRING in the SETTINGS menu A To create a pairing relationship us ing manual interaction proceed as follows Activate the Main Menu by pressing N MENU and select SETTINGS by pressing SRC OK or WMENU Select PAIRING then press SRC OK or MENU The system will start the pairing procedure The system shows the mobile phone pairing PIN on the instrument pan el display and repeats it out loud Please note that this is a PIN used solely for this operation it is not your SIM card PIN For the next two stages consult your mobile phone manual for the pairing and connecting mode through Blue tooth devices 37 BLUE amp ME BLUE amp ME 38 On your mobile phone search for devices with Bluetooth technol ogy that are within range this op tion on your mobile phone might be called Search New Device etc View the list of Bluetooth tech nology enabled devices and select Blue amp Me name that identifies Blue amp Me on your car When prompted by the mobile phone enter the PIN number shown on the instrument panel display If pairing is successful the system will say Connecting then the dis play will show the paired mobile phone s ID It is important to wait until this con fi
39. by the system Adjust the volume of Blue amp Me functions hands free tS SMS message reader Media Player voice announcements A f serol through Blue amp Me menu items Select Media Player tracks Scroll through SMS messages in the list SRC OK Confirm manually selected menu option Switch phone conversation from the hands free system to your mobile phone and vice versa Audio source selection Radio CD CD Changer Media Player AUX Select the SMS message displayed AY Selection of previous next folder artist genre album depending on the mode selected or e o a A Playe i an a_i Notes Radio buttons O For many functions the SRC OK and MENU controls on the steering wheel are interchangeable and you can select the button you prefer O For both methods of operating the steering wheel controls short press or hold down the function is activated when you release the button BLUE amp ME BLUE amp ME HANDS FREE QUICK GUIDE To start using the hands free function with Bluetooth Blue amp Me voice recogni tion O Turn the ignition key to MAR O Try out the voice commands O Pair your mobile phone O Make a phone call gt Instructions for each of the above func tions are given in the following paragraphs PREPARING YOUR MOBILE PHONE PHONEBOOK Before creating a pairing relationship be tween your mobile phone and Blue amp Me you should make sure that you have your co
40. ce using the Safely remove hardware option iPod Problem With iPods or USB keys the system continues playing the same track or the forward button has to be pressed to move on to the next track The iPod connected to the Blue amp Me is not charged Probable Cause The track loop function may have inadvertently been activated When the ignition key is turned to MAR the car recharges the iPod unless the iPod is completely run down Possible Solution There is a specific item in the menu like Track loop or Cycle which must be deactivated To deactivate O press the command activation button on the steering wheel O when requested by the system say TRACK LOOP OFF in a clear tone of voice O wait for voice confirmation by the system which will say TRACK LOOP DEACTIVATED Remember to keep your iPod at least minimally charged or wait a few minutes until the system recharges it 71 BLUE amp ME BLUE amp ME 72 PERSONAL DATA PROTECTION The functions provided by the Blue amp Me device involve the handling of personal data In order to protect and to prevent unau thorised access to personal data the device has been created so that O Personal data associated with hands free functions phonebook and last calls can only be accessed after automatic recognition of your Bluetooth technology mobile phone O Stored personal data can be deleted using the spe
41. cific Blue amp Me functions gt For more information on how to delete personal data refer to the chapter SETTING FUNCTIONS MANAGING USER DATA IMPORTANT Take into account that when leaving your car at a service centre personal data stored on Blue amp Me phonebook and last calls may be disclosed or may be subject to improper use Before leaving your car at the service centre you can delete stored data and the phonebook from Blue amp Me gt For more information on how to delete personal data and phonebook refer to the chapter SETTING FUNCTIONS MAN AGING USER DATA WARNINGS ON THE USE OF THE SYSTEM S SOFTWARE This system contains software licensed by Fiat Auto S p A according to a license agreement Any removal reproduction reverse engineering or other unauthorised use of the software for this system in violation of the license is strictly prohibited IMPORTANT Illegal access within the Blue amp Me device or installing unauthorised software may invalidate the warranty and compromise the security of the information stored END USER LICENSE AGREEMENT FOR THE USE OF THE SOFTWARE EULA You have purchased a system SYSTEM containing software licensed by Fiat Auto S p a for one or more software licensers Soft ware Suppliers to Fiat Auto S p a Such software products in the same way as the multimedia elements printed materials and online or electronic documentation SOFTWARE are pro
42. device After giving a command Blue amp Me says Command not available Probable Cause O Your collection of music tracks contains files protected by DRM which are skipped during playback O Your music track collection may exceed the maximum number of audio files that can be imported into the library the maximum number can vary from 12 000 to 16 000 files depending on the file type O Your music track collection on the USB device includes folders nested more than 20 folders deep The digital audio files in these nested folders will not be imported into the library Some commands are not available while the track is paused or while the CD player is playing Possible Solution If the track is paused press J ESC to resume Then give the voice command again 69 BLUE amp ME BLUE amp ME 70 Problem Probable Cause Possible Solution The same USB memory device previously You removed the USB memory device inserted takes more than 10 seconds from the PC before it was ready to resume playback on Blue amp Me To restore the USB storage device using Microsoft Windows XP click on My Computer in the Start menu right click on the USB storage device select Properties select Tools click on Check now in the Error checking section select the option Automatically fix file system errors then click on Start To avoid this problem in the future remove the USB devi
43. download only some contacts Some SMS messages for example those sent by a network operator do not have the sender s number associated with them therefore the option CALL cannot be used To download the phonebook for your mobile phone refer to the appropriate item on the settings menu gt SETTINGS FUNCTIONS PAIRING A MOBILE PHONE and MANAGING USER DATA paragraphs 65 BLUE amp ME BLUE amp ME 66 MEDIA PLAYER Problem Displayed message NO MEDIA The display reads No USB device found Or Blue amp Me says No USB device found fae oe 7 and turning the ignition key to MAR no music is heard After having inserted a USB device and turned the ignition key to MAR there are malfunctions in Blue amp Me e g failure to play music tracks or no voice messages Probable Cause O There are no digital audio files on the USB storage device O If the power supply is interrupted e g the car battery is disconnected Blue amp Me will lose power temporarily In this event the media library must be recreated No USB device is connected to the USB port in the car O Your USB storage device is not supported by Blue amp Me Creating the media library may require a few minutes You may have used a USB device with PASSWORD function activated Possible Solution O Load the digital audio files onto your USB storage device following the instructions in your
44. e Au toplay select AUTOPLAY OFF and press SRC OK or MENU 0 Or using voice interaction l Press af and say Autoplay on or Autoplay off Note If you change the Autoplay setting after connecting a USB device the new setting will only be activated the next time that you connect a different USB device or the same USB device with updated track library Shuffle Use the Shuffle option to change the dig ital audio playback sequence With Shuf fle on Blue amp Me will play digital audio files in a random order A To change the Shuffle setting us ing manual interaction proceed as follows Activate the Main Menu select MEDIA PLAYER SET USB SHUFFLE then press SRC OK or MENU To activate the Shuffle function se lect SHUFFLE ON and press SRC OK or NMENU To deactivate the function select SHUFFLE OFF and press SRC OK or MENU 1 Or using voice interaction Press a and say Shuffle on or Shuffle off Track loop When the Track loop is activated a track is played back repeatedly A To activate Track loop using man ual interaction Activate the Main Menu select MEDIA PLAYER SET USB TRACK LOOP then press SRC OK or N MENU To activate the Track loop function select LOOP ON and press SRC OK or WMENU To deacti vate the function select LOOP OFF and press SRC OK or MENU 1 Or using voice interaction l Press a and say Track loop o
45. e amp Me Main Menu are displayed on the instru ment panel display and the car radio see fig 1 The display shows the following informa tion O Status information for the mobile phone connected with Bluetooth technology ox indicates that Blue amp Me is con nected to a mobile with Bluetooth technology O Absence of the symbol means that the connection with the mobile phone has been lost O Symbol 1 indicates that the active call is the first to be answered this symbol is present only in the event of a call waiting O Symbol 2 indicates that the active call is the second to be answered this sym bol is present only in the event of a call waiting O The Symbol t indicates that a Con ference Call is in progress O Name of your current network operator is displayed if not available O Information relating to the receipt of an SMS message the phone number or the name if stored in the phonebook of the sender of the SMS message O Information relating to the audio track that is being listened to with Media Player O Current Blue amp Me function infor mation or selected menu option infor mation AUDIO Blue amp Me uses your car s audio system to provide audio output hands free Me dia Player voice announcements and au dible signals For this purpose the active audio source is muted for the time re quired You can always adjust the audio volume eithe
46. echnology enables wireless connection between your mobile phone and the hands free system installed on your car BLUE amp ME BLUE amp ME To use the hands free function you need a Bluetooth technology enabled mobile phone This function allows you to inter act vocally with your mobile phone while driving even if your mobile device does not feature this capability You can also in teract with your mobile phone manually and visually using the steering wheel con trols and the instrument panel display For more information on the mobile phones supported by Blue amp Me refer to the chapter TECHNOLOGIES SUP PORTED BY BLUE amp ME To get started with the Blue amp Me hands free function with voice e recognition simply pair your Bluetooth technology enabled mobile phone with the system Pairing is an operation that has to be car ried out only once Note During the mobile phone pairing proce dure Blue amp Me attempts to detect a phone equipped with Bluetooth tech nology within range It then establishes the connection using a Personal Identification Number PIN Once your phone is paired you can trans fer your mobile phone contacts to the system make a phone call either by us ing the phonebook or dictating the phone number accept a call and answer a sec ond incoming call To interact with Blue amp Me you can use both the buttons on the steering wheel and voice commands With voice recog
47. edia library Selection by folder Selection by artist Selection by genre Selection by album Selection by playlist Playing audio tracks sississsissssissssisssisssssssesssssessisicis Shuffle playback of the whole media library Now playing track data PAUSE vaian inn aitari INOME E N E Previous track Changing audio source ou scseecsssesseessesssteesseecsseessseesseeesaes Practical tips for using Media Playerr ssesssesssesesessseees SCHOMIMG sis ssessssentetetasnsehetctermsdertsiensse Organising multimedia files Creating a media library on Blue amp Me Creating a playlist for Blue amp Me RISB S CtiM gs cfussciacaccsssssaiesesaciassaissisiseeneicersasceesnerses Automatic playback SMUG soneria Track loop SETTING FUNCTIONS siarsiisiinsinssinniinninies Pairing a mobile Phone sissssssassassrosscsosiaisoesassnnazisinstssaeasasinnsoss Managing user data Advanced options Exit settings menu TECHNOLOGIES SUPPORTED BY Blue amp Me Mobile phones with Bluetooth technology Mobile phones with phonebook management FUN CEION sscnssccesicenisssccnssssscnvcnnssoacenibecendeacesabacssieacenisnssieasestasess Mobile phones with single contact function Manageme sannana anaa Mobile phones with SMS message management Supported USB storage devices oo eseessecssecsseecsseeen
48. eed with the dia logue as you wish O If you need further help press a and say Help again PAIRING YOUR MOBILE PHONE IMPORTANT This operation should be carried out only with the car stationary To pair your mobile phone proceed as follows O Press a amp and say Settings then at the end of the Blue amp Me message say Pairing O The system will show the phone pairing number PIN on the instrument panel display For the next two stages con sult the chapters in your mobile phone manual on pairing and connecting through Bluetooth technology O On your mobile phone search for de vices equipped with Bluetooth tech nology the setting on your mobile phone might be called Search or New Device Find Blue amp Me in this list the name that identifies the Blue amp Me system in your vehicle and se lect it O When prompted enter the PIN dis played on the instrument panel display using your mobile phone keypad If pair ing is successful the system will say Connecting and at the end the dis play will show as confirmation the ID of the paired mobile phone It is important to wait for this confirma tion message if you press MENU or JIIESC before it appears you risk can celling the pairing process If the pairing fails an error message will appear in this case you will need to repeat the proce dure O After pairing Blue amp Me will say Welcome
49. eeese 45 USB storage devices sssesscssscsseesesecsssscssssssesssseeseeeeses 45 Managing audio files from iPod devices oo 45 Supported digital audio files 46 Supported playlist formats 0 cessssecsssesseessecsseesseesees 47 LIST OF AVAILABLE VOICE COMMANDS 0 0 48 Table of always available voice commands sssseecseeeee 48 Table of hands free voice commands sssessseessseessseees 49 Table of SMS message reader voice commands 5I Table of Media Player voice commands 1 00 52 Table of setting functions voice commands seeeseeeee 55 TROUBLESHOOTING 56 Hands free senonensroses 56 General erreen aas 56 SMS message reader sssscssssssssecsesssssesssssesscssssessnseeseseeseeess 64 Media Player 66 Podeni R vandecssitsiass 71 PERSONAL DATA PROTECTION ssssssssssssssssrsssssrsssssresse 72 IMPORTANT INFORMATION ON USING THE SYSTEM SOFTWARE sssssssesssisiessisesarssosanisessnasasonosinsnasan 73 Hands free system with Bluetooth technology SMS message reader and Media Player GENERAL INFORMATION Blue amp Me based on Microsoft Auto is a personal infotainment system which allows the use of communication and en tertainment applications specially designed for use on cars The Blue amp Me system installed on your car is equipped with hands free SMS mes sage reader and Media Player and it is pre set for the installation of additional ser vices that wi
50. en press SRC OK or MENU Blue amp Me will read the selected SMS message u gt Or using voice interaction Press al and say Message read er after the audible signal say In box Blue amp Me will display the information on the display for the first message in the inbox if in the phonebook the sender s number will be displayed You can scroll through the Inbox by saying Back or Next when the required message appears say Read Blue amp Me will read out the selected message Say Delete to delete the selected message MANAGING SMS MESSAGES For each SMS message received Blue amp Me can g read it O call the sender s phone number di rectly g delete it A In order to do this using manual in amp teraction activate the Blue amp Me Main Menu while the message is be ing read then use the SRC OK or N MENU buttons to select the required function gt Or using voice interaction I Press a and say Read or Call or Delete the system will select the chosen option DELETING ALL MESSAGES Blue amp Me can store up to 20 SMS mes sages receiving a new message will delete the oldest message from the inbox All the SMS messages stored in the Blue amp Me memory can be deleted with a single com mand A If you want to delete all messages With manual interaction activate the of Blue amp Me Main Menu and select
51. es or updates to third party sites or for ii broadcasts via the Internet or of any other type re ceived from any third party If the SOFTWARE provides links to third party websites such links are made available only for your convenience the inclusion of a link does not imply approval of the third party website by Software Suppliers of Fiat Auto S p A their related companies and or their appointed representative FORMATS FOR UPDATES AND RESTORATION If the SOFTWARE is provided by Fiat Auto S p A separately from the SYSTEM on formats such as ROM chip CD ROM or with downloads from the Internet or by other means and if it is labelled Only For Update you can install one 1 copy of the SOFT WARE on the SYSTEM to replace the existing SOFTWARE and can use it in accordance with this EULA including any addition al terms for the EULA annexed to the SOFTWARE update 75 BLUE amp ME BLUE amp ME 76 INTELLECTUAL PROPERTY RIGHTS All the intellectual property titles and rights to the SOFTWARE including but not limited to images photographs animations video files audio files music texts and applets built into the SOFTWARE the relevant printed material and any copy of the SOFT WARE are the property of the Software Suppliers of Fiat Auto S p A their related companies or suppliers The SOFTWARE is li censed not sold Copying the printed material attached to the SOFTWARE is not permitted All the intellectual property tit
52. g Bluetooth technology between the system and mobile has been disabled on your mobile phone identification Blue amp Me O The pairing relationship has been deleted phone s Bluetooth technology connection O During a phone conversation the mobile phone was taken out of the system s range O An error occurred during the pair ing procedure O An error occurred with the mobile O Turn the mobile phone on O Make sure that your phone has been paired CMake sure that the Bluetooth technology connection on your mobile phone is active Blue amp Me ID O Make sure that the mobile phone that you have paired with the system is within its range O Turn the mobile phone off and on to restore the connection with Blue amp Me O Reset Blue amp Me by turning the ignition key to STOP then back to MARor press MENU O Check that the PIN is correct and try to enter it again O Turn the mobile phone off and on then repeat the pairing procedure gt SETTING FUNCTIONS PAIRING YOUR MOBILE PHONE Problem Probable Cause Possible Solution The display shows PAIR FAILED e _ m E ei anaes PRIVATE NUMBER e io eer ree acl the phonebook automatically after connecting the mobile phone to Blue amp Me O The user has not entered the PIN code provided by the system into their mobile phone within three minutes O The caller is not recognised as
53. ge is received whether it is read or not Blue amp Me will save it in an inbox refer to the Inbox paragraph If you want to read the last message received activate the Blue amp Me Main Menu and select the MESSAGE READER option then press SRC OK or MENU Select the READ LAST option and press SRC OK or N MENU in this way Blue amp Me will read the last message received 4 Or using voice interaction Press Ag and say Read last Blue amp Me will read the text of the last message received 25 BLUE amp ME BLUE amp ME 26 INBOX Blue amp Me stores up to 20 received messages if there are concatenated mes sages the number of messages stored may be less during the connection with your Bluetooth mobile phone When the in box is full if a new message is received the oldest message will be deleted even if it has not been read yet Messages in the inbox can be deleted individually or collectively refer to the MANAGING SMS MESSAGES paragraph If you want to read a specific message wy stored with manual interaction open the Main Menu of Blue amp Me and select the MESS READER option and then press SRC OK or 5 MENU Select the option MESSAGES RE CEIVED then press SRC OK or MENU Scroll through the saved messages until you reach the one you want the system will display in formation on the identity of the sender of the message where avail able Select READ th
54. icsson is a registered trademark of Telefonaktiebolaget LM Ericsson Motorola is is registered trademark of Motorola Inc Nokia is a registered trademark of Nokia Corporation Siemens is a registered trademark of Siemens AG Orange is a registered trademark of Orange Personal Communications Services Limited Audiovox is a registered trademark of Audiovox Corporation Bluetooth is a registered trademark of Bluetooth SIG Inc Lexar and JumpDrive are registered trademarks of Lexar Media Inc SanDisk and Cruzer are registered trademarks of SanDisk Corporation iPod iTunes and iPhone are registered trademarks of Apple Inc All other trademarks are the property of their respective owners Apple is not responsible for the operation of this device and of its conformity with the safety rules and standards Made for g Works with iPod iPhone Om 47 BLUE amp ME BLUE amp ME 48 LIST OF AVAILABLE VOICE COMMANDS The following tables list the voice commands available on Blue amp Me For each command the main voice command and syn onyms that can be used are shown TABLE OF ALWAYS AVAILABLE VOICE COMMANDS Help Activates the Help function which provides the list of voice commands available for the current level Cancel Cancels voice and or manual interaction and deactivates the voice recognition system e Repeat Repeats the last voice message provided by the system i
55. ing playlists refer to the PRACTICAL TIPS FOR USING MEDIA PLAYER chapter PLAYING AUDIO TRACKS For the complete list of voice commands that can be used with the Media Player re fer to the LIST OF AVAILABLE VOICE COMMANDS For managing audio files on iPod or iPhone devices see TECHNOLOGIES SUP PORTED BY Blue amp Me Managing audio files from iPod devices paragraph Random playback of the whole media library The PLAY ANYTHING option is used to quickly play the whole contents of your media library in a random order To start the PLAY ANYTHING w function using manual interaction proceed as follows Activate the Main Menu select the MEDIA PLAYER option then press SRC OK or MENU Select USB OPTIONS then press SRC OK or MENU Select the PLAY ANYTHING option then press SRC OK or N MENU We Or using voice interaction Press aM and say Media Player then USB options and finally Play anything For more information on digital au dio file playback refer to the chap ter DIGITAL AUDIO SELECTION If the AUTOPLAY function is on connect your USB device to Blue amp Me and track playback will start automatically gt SETTING FUNCTIONS MEDIA PLAYER You can also select the required audio file then press SRC OK or N MENU to start playing it Now playing track data With the NOW PLAYING function you can display current track data for 15
56. ions and safety information carefully IMPORTANT Looking at the system when driving can divert attention from the road risking accidents or other serious con sequences Do not change system settings or enter data non verbally using the manual controls while driving Stop the car in a safe and legal manner before carrying out these operations This is important since while setting up or changing some func tions your attention may be distracted from the road and you may have to remove your hands from the wheel GENERAL OPERATION Voice commands the system functions can be carried out using only voice commands Using voice commands while driving allows you to op erate the system without removing your hands from the wheel Looking at the display for a long time while driving do not use any function that requires looking at the display for a long time Pull over in a safe and legal manner before attempting to access a function of the system that requires prolonged attention Even occasional short glances at the display may be hazardous if your attention is diverted from driving at a critical moment Setting the volume do not turn the volume up too high Keep the volume at a level where you can still hear outside traffic and emergency signals while driving Driving while unable to hear these sounds may cause an accident Using the voice recognition the voice recognition software is based on a statistical process that is subject to error It is you
57. is advisable not to use USB devices pro vided with password function If the USB device is equipped with this function al ways ensure that the function is disabled Media Player supports just one media li brary When a new USB device is con nected Blue amp Me will generate a new library replacing the existing one MANAGING AUDIO FILES FROM iPod devices What you can do O Listen to tracks in digital quality O Select tracks by Artist Album Genre etc by voice commands or using the controls on the steering wheel O Display information about the track be ing played song title singer etc on the instrument panel O Recharge the iPod via USB Notes The device must be in playback mode or paused to start playing a track on some iPod iPhone models Load the tracks onto the iPod iPhone de vice using the corresponding management program It is advisable to keep telephones and iPods updated to the most recent release for optimal operation of the Blue amp Me system 45 BLUE amp ME BLUE amp ME 46 Supported digital audio files Media Player supports the playback of audio files with the following formats Extension wma Wav MP4 Note It also supports the Fraunhofer MP2 5 extension sampling frequencies 8 kHz 1 025 kHz and 12 kHz Audio encoding It supports the WMA version and WMA version 2 standards WMA2 353 WMAI 352 Supports WMA Voice audio formats i
58. les and rights on the content to which the SOFTWARE gives access are the property of the respective owners of the content and are protected by the current laws and treaties applicable to reproduction rights and intellectual property This EULA does not give you any right to use such content All rights not expressly provided with this EULA are retained by the Software Suppliers of Fiat Auto S p A their related companies and suppliers The use of any online service to which the SOFTWARE gives access will be regulated by the terms of use for these services If this SOFTWARE contains documentation provided only in electronic form you may print a copy of such documentation EXPORT RESTRICTIONS You agree that the SOFTWARE is subject to the jurisdiction on exports from the US and the European Union You undertake to respect all national and international laws applicable to the SOFTWARE including US Export Administration Regulations and the restrictions for the end user the end use and the destination issued by the US and other governments TRADEMARKS This EULA does not grant you any right regarding trademarks or commercial brands of the Software Suppli ers to Fiat Auto S p A their related companies or suppliers PRODUCT ASSISTANCE Product assistance for the SOFTWARE is not provided by the Software Suppliers to Fiat Auto S p A or their related companies or subsidiaries For product support we ask you to refer to the bodies suggested by Fiat
59. ll be played 33 BLUE amp ME BLUE amp ME 34 Changing audio source To change the active audio source Radio CD CD Changer Media Player press SRC OK or the specific buttons on the front panel of the car radio see specific manual PRACTICAL TIPS FOR USING MEDIA PLAYER Sliding OTo optimise scrolling through the FOLDERS menu organise the folders on your USB device before connecting it to Blue amp Me To facilitate and optimise selection in the FOLDERS menu organise your tracks in folders with names that mean something to you Organising media files O In order to select music on Blue amp Me based on particular selection cri teria author album genre etc infor mation contained in multimedia files must be present and up to date To up date the information for each file follow the instructions in the documentation for your multimedia file management software O If certain items in your library have no Artist Album Title and Genre data Blue amp Me will show UNKNOWN in the ALBUMS and GENRES menus To enter information in a digital audio file follow the instructions in the doc umentation for your multimedia file management software Creating a media library on Blue amp Me O Creating the media library may require several minutes If the time required is excessive you can intervene by reduc ing the number of audio files stored on your USB device O While creating the librar
60. ll become available over time Note Not all mobile phones support the SMS text message reader function or automat ic phonebook transfer via Bluetooth For more information on mobile phones which support this function go to www fiat com Thanks to its complete integration with the voice commands the steering wheel controls the car radio controls and the in formation on the instrument panel display the Blue amp Me system allows customers who have a mobile phone with Blue tooth to use it even if it is in their jack et pocket or handbag without ever having to take their hands off the steering wheel To use the voice commands there is no need for a voice learning stage by the voice recognition system The system is capable of recognising the voice commands given irrespective of gender by the tone of voice and intona tion of the person giving the instructions With this system you can also play your favourite music stored on a USB device and select tracks and playback modes with both voice commands and buttons on the steering wheel HANDS FREE SYSTEM The basic characteristic of this function is the hands free communication with voice recognition and Bluetooth technology This system allows you to make and re ceive phone calls using voice commands or manual controls on the steering wheel in complete safety freedom and comfort while driving in full compliance with the requirements of the law Bluetooth t
61. lt your Abarth dealer Printed in recycled paper without chlorine
62. luetooth tech nology enabled devices and select Blue amp Me name that identifies the hands free system of your car When prompted by the mobile phone enter the PIN shown on the control panel display using your mo bile phone keypad If pairing is suc cessful the system will say Con necting then the display will show the paired mobile phone s ID It is important to wait until this con firmation message is displayed since pressing MENU or JESC be forehand may cancel the pairing process If pairing fails an error message will be displayed and the pairing procedure will have to be repeated At the first pairing the system will say Welcome immediately after con necting This message will no longer be heard for subsequent connection procedures for the same phone The system will ask whether you would like to copy the phonebook for the phone that you have just paired Copying the phonebook on to the system is recommended To copy the phonebook say Yes To not copy the phonebook say No For certain mobile phones the phonebook is not copied automat ically in this case you must trans fer the contacts using your mobile phone keypad see the Adding con tacts paragraph Tips To improve the voice recognition of your phonebook entries and Blue amp Me pro nunciation accuracy try to enter contacts and store them using the following criteria O Avoid abbreviations O
63. mately eight seconds after pressing N MENU 61 BLUE amp ME BLUE amp ME 62 Problem Probable Cause Possible Solution If you try and register a phone that has already been registered the display shows Registration unsuccessful After downloading the phonebook from the mobile phone contacts middle names initials titles or suffixes are not recognised by the voice recognition system The mobile phone has already been paired When calling contacts by voice the voice recognition system does not support the use of titles suffixes or middle names initials Remember that the pairing procedure only needs to be performed once for your mobile phone After this procedure Blue amp Me will automatically connect to your phone each time you get into the car and turn the ignition key to MAR If you need to pair a phone again select DELETE USERS then repeat the pairing process gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK gt SETTING FUNCTIONS PAIRING YOUR MOBILE PHONE When you call a name in the mobile phonebook using voice recognition say the name without using titles suffixes or middle initials If you have two entries with similar first and or last names in your phonebook modify one of the entries in the mobile phone to make it unique Then download the phonebook to the hands free system again Problem Probable Cause Possible Solution In some cases it is
64. multimedia file management software O Follow the instructions to connect your USB device to Blue amp Me O Remove the USB device from the USB port in the vehicle and reinsert it The media library will be recreated Wait for the library to be created If creating the library takes too long you can intervene by reducing the number of audio files stored on your USB device an nc fon scenes e m PE device Problem Probable Cause Possible Solution Displayed message NO PLAYLISTS Displayed message INVALID Displayed message EMPTY PLAYLIST Displayed message BAD MEDIA You have attempted to play a playlist but no playlist is stored on the USB device The playlist is corrupt or invalid O The playlist does not contain multimedia files O The wpl file is too big for the memory of Blue amp Me O The playlist does not contain ref erences to multimedia files on your USB device The digital audio is corrupt or invalid Create a playlist on your computer using your mul timedia file management software then copy it to your USB device O Make sure that the playlist is in wp format O Create the playlist again following the instruc tions given in CREATING PLAYLISTS FOR Blue amp Me PRACTICAL TIPS O If the problem persists delete the playlist from your USB device O Delete the playlist from your USB device or add the multimedia files to the playlist using y
65. n or Track loop off Note With Track loop on use the previous and next track functions to go to the pre vious or next audio track which will be looped SETTING FUNCTIONS The SETTINGS menu lets you perform the following functions O Pairing a mobile phone O Managing user data O Advanced options To perform functions and adjustments in the SETTINGS menu you may use the steering wheel controls or voice com mands when the car is at a standstill When the car is moving you can use voice commands only Instructions are provid ed for both methods gt If you encounter difficulties with any of the Blue amp Me settings functions refer to the chapter TROUBLESHOOTING PAIRING A MOBILE PHONE You must create a pairing relationship be fore you can use your mobile phone with the hands free function on your car During the pairing procedure the hands free system attempts to detect a phone with Bluetooth technology within range It is finds one it establishes a connection using a Personal Identification Number PIN After a pairing relationship is es tablished you can use the hands free sys tem to operate the phone IMPORTANT The mobile phone pairing PIN is a special PIN generated randomly at each new pairing It is therefore not necessary to memorise it and losing it will not impair the operation of the hands free system The pairing procedure will only need to be performed once for your mo
66. ne call press or or adjust the position of the car radio knob After the phone call has ended the vol ume will revert to the original level You can also press or to adjust the volume of the current Blue amp Me voice announcement Remember that to interrupt a voice an nouncement you can press af at any time during a voice interaction and give a new voice command Valid means that the voice command given is included in the Blue amp Me vocabulary and can therefore be recognised by the system at a given level BLUE amp ME BLUE amp ME 16 Notes C Instructions concerning the use of voice commands are identified in the text by the symbol I O After you press a if you do not is sue a voice command within a few sec onds the system will prompt you to give a voice command If you do not re spond then voice recognition deacti vates This is also the case if you do not respond to a question from the system You will hear a audible signal indicat ing that voice recognition has been de activated O When the system fails to recognise one of your voice commands it will give you another opportunity to issue the voice command If you are unsure of whether the voice command is appropriate for a given level say Help Using voice recognition The voice recognition system may occa sionally fail to recognise a voice command To ensure that your voice commands are always recognised by the sy
67. ne to the hands free system us ing manual interaction proceed as follows Select the ADD CONTACTS option then press SRC OK or N MENU Or using voice interaction Press a say Settings then after the message supplied by the system say Add Contacts Then follow the instructions in your mo bile phone manual on transferring contacts from the phone to another device Resetting user data Q We V To restore the hands free system s initial setting reset all user data and phonebooks contacts for paired phones using manual interaction proceed as follows Select the DELETE ALL option then press SRC OK or MENU The system will display the message Delete all To delete all data confirm by pressing SRC OK or N MENU Or using voice interaction Press a say Settings and after the message supplied by the system say Reset all The system will ask Delete all data saved by users from the system To confirm say Yes ADVANCED OPTIONS To access the ADV OPTIONS 2 Menu using manual interaction pro We ceed as follows Access the Main Menu press N MENU and select the SETTINGS option by pressing SRC OK or N MENU Select the ADVANCED OP TIONS option then press SRC OK or N MENU Or using voice interaction Press a and say Settings then Advanced options In the ADV OPTIONS menu you can access technical information on your Bl
68. nebook mobile Cell system phone contacts Telephone A B Phone Activates phone function and provides voice instructions for using the hands free system Callback Dials the phone number of the last caller e Redial Last call Dials the last phone number called Dials the last number called Recall Dials the number of the last person that called you Opens the last calls list 50 TABLE OF SMS MESSAGE READER VOICE COMMANDS e Read last one Read last e Read last message Read message Read last SMS text Read last text e Read text Read SMS texts Reads last message received e Message reader e Messages e SMS reader e SMS Activates the menu SMS MESSAGE READER 3 gt Read message e Read last one Read last e Read last message e Read last SMS text Read last text e Read text Read SMS texts Reads last message received Inbox e Received Opens the received messages inbox the system will display the first message in the list Delete all Delete messages e Delete texts e Delete Delete all messages in the inbox the system will ask for confirmation before deleting e Signal type Signal Activates the function Signal settings e Read Read again Call Dial Delete e Delete message Next Forward The one after Previous Back e Backwards The one before Reader off g
69. not possible to call On certain mobile phones when Replace with 00 phone numbers that contain an downloading names and or phone e g 39 becomes 0039 international prefix e g 39 Italy numbers to the hands free system 44 UK 33 France etc the sign is omitted To see the list of supported mobile phones and functions consult the dedicated site www fiat com Blue amp Me section or call Customer Services on 00800 222784 00 Here you can find O a quick guide with tips for use O a mobile phone pairing guide O tips for connecting an iPod O the ten available voice recognition language files that can be downloaded alternatively onto Blue amp Me Italian French English German Spanish Portuguese Dutch Polish Brazilian Turkish 63 BLUE amp ME BLUE amp ME SMS MESSAGE READER Problem SMS messages are received on the mobile phone but not on Blue amp Me The SMS messages received from the network operator s service centre display the sender s name or number incorrectly Blue amp Me has stopped receiving messages from your mobile phone Some SMS messages on your mobile phone are not displayed in the Blue amp Me SMS inbox Probable Cause Not all mobile phones support the transfer of SMS messages to Blue amp Me Not all mobile phones support the cor rect transfer to Blue amp Me of the name of the network operator which sent the SMS message You m
70. ntacts in your mobile phone phonebook so that you can use them with the hands free system gt If your phonebook is empty create new entries for frequently dialled phone numbers For further details consult your mobile phone manual gt For the best use of the car s hands free system refer to the suggestions for how to store the names in your mobile phone directory in the SETTINGS FUNCTIONS PAIRING A MOBILE PHONE chapter IMPORTANT NOTES O The phonebook copied to Blue amp Me can only be used when the corre sponding mobile phone is connected O Entries stored in SIM card or mobile phone memory can be transferred to Blue amp Me with different proce dures depending on your mobile phone model GETTING TO KNOW VOICE COMMANDS When talking to the system you can al ways use the voice command Help to obtain detailed instructions on the voice commands available for each stage of in teraction To try out the the Help command pro ceed as follows O Press the steering wheel button ag O After Blue amp Me emits a tone indi cating that voice recognition is active say Help Blue amp Me will give the list of voice commands available O After the help message is finished say Settings and then after the message Help Blue amp Me will repeat the list of voice commands available for the SETTINGS menu O You can then give one of the available commands and proc
71. nu al lows you to scroll through the digital audio tracks in the library by folder artist genre album or by playlist This menu can also be used to select the tracks to be played and change Media Player settings IPod player see Managing audio files from iPod devices O SETTINGS this submenu allows you to manage your phonebook en tries pair a new device or access in formation on the Blue amp Me system and applications Activating the Main Menu To activate the Blue amp Me Main Menu press WMENU then interact with the sys tem by using the steering wheel controls Navigating through the menu options To navigate through menu items press or V When the number of characters for a phonebook contact exceeds the maxi mum number of characters allowed the name will be truncated To select the option shown on the display press SRC OK or MENU To exit from the selected item or from a submenu press IESC HANDS FREE FUNCTIONS Blue amp Me lets you make and receive phone calls on your Bluetooth tech nology enabled mobile phone using voice recognition or steering wheel controls You can use voice commands to phone your contacts by saying their name and or surname or you can phone numbers that are not stored by saying the number out loud or you can call the sender of a re ceived SMS message With the steering wheel controls you can make phone calls to people in your phone book o
72. o one zero three The system will display and repeat the complete phone number recog nised If the number is complete say Call If you have not finished giv ing the phone number say the re maining digits and then say Call The system will start the call to the displayed phone number To end the call press WWMENU for more than one second You can give the phone number in digit groups which allows you to verify the recognised number one group at a time Digit groups are created by the pauses you make while saying the digits If you pause after pronouncing a certain number of digits a digit group is created The system will repeat the digits recog nised If the given digits are correct you can continue to dictate the phone number If they are incorrect you can delete the digit group by saying Delete The system will delete the last group of numbers and dis play the partially composed phone number You can then give the re maining digits of the phone number To cancel the phone call say Can cel To cancel the phone number dis played and start dialling again say Start over To ask the system to repeat the recognised phone number say Repeat If no phone number was dialled the system says that no number is available If the repeated phone number is correct say Call to start the call Note When dialling a phone number using voice commands it i
73. o files on the USB device will be ignored see Compatible digital audio files To use Media Player simply plug your USB device to the car s USB port either di rectly or with an extension lead When the key is turned to MAR Blue amp Me will start to create your media library in dex At the end of the operation you can navigate through the whole library and browse categories by using the steering wheel controls voice commands or car radio controls After you have chosen what you want to listen to Blue amp Me will play it through the cars audio system ROAD SAFETY WARNING Using certain functions of this system while driving can distract your attention from the road and possibly cause an acci dent or have other serious consequences for this reason certain functions must only be used when driving conditions allow it and if required only when the car is stopped WARNING Read and follow these instructions before using your system read and follow all the safety information and instructions in this manual User Guide Failure to observe the precautions found in this User Guide may lead to an accident or other serious conse quences Keep the manual in the car if it is kept in the car the User Guide will become something quick and easy to consult for those not familiar with the system Make sure that before using the system for the first time all persons have access to the User Guide and read its instruct
74. ose The words which are recognised by the system are identified as voice commands The hands free system recognises and re sponds to a preset list of voice commands The list of available voice commands de pends on the point you are at in the hands free system menu The list of voice com mands available at any moment is always available by pressing ag and saying Help or saying Help after a system message Blue amp Me also recognises personalised versions of voice commands such as the name of a contact in your phonebook There is no voice training phase required for using voice commands with this hands free system To give the system a voice command press Ag wait for the acoustic signal which in dicates that the voice recognition system is active at this point you can give the command in your normal voice not too quickly but without interruptions When the system recognises the command it will give a response or act on your command The voice commands are divided into lev el level 2 and level 3 When a valid Ist level voice command is given the system will activate 2nd level voice commands when a valid 2nd level voice command is given the system will activate 3rd level voice commands If the user gives a valid Ist level voice com mand then the submenu relevant to that command will remain active until a voice command leading to another level is given or the interaction is interrupted
75. our multimedia file management software O Reduce the number of songs in the playlist using your multimedia file management soft ware If the digital audio is corrupt delete it from your USB device 67 BLUE amp ME BLUE amp ME 68 Problem Probable Cause Car radio display shows The USB device has been removed MEDIAPLAYER without USB from the car USB port with the device connected to the USB port _ ignition key at STOP on the vehicle Displayed message The audio track that you have PROTECTED selected for playback is protected by DRM and cannot be played on the Media Player Blue amp Me does not play Your playlist probably contains files all the digital audio files in protected by DRM which are not a playlist played or it contains invalid multimedia file references Possible Solution O Press SRC OK or the dedicated buttons FM AM CD on the front panel of the car radio to change the active audio source O With the key at MAR insert and remove the USB device from the USB port on the car O To prevent the MEDIAPLAYER indication from displaying in the absence of USB device always remove the device when the ignition key is on MAR or stop playback with the voice command STOP before removing the USB device rom the car s USB port For more information see the section SUPPORTED USB STORAGE DEVICES Problem The multimedia library does not show all the digital audio files on my USB
76. press SRC OK or MENU a Or using voice interaction I Press 8g and say Message read er after the signal say Notifica tion type Blue amp Me will list the available options to you and you can make a selection by saying Reader off or Visual and acoustic sig nal or Visual signal only 27 BLUE amp ME BLUE amp ME 28 MEDIA PLAYER MP FUNCTIONS The MEDIA PLAYER MP menu is used to O display tracks stored on your USB de vice iPod connected to the USB port O play the audio files stored on your USB device iPod connected to the USB port Note Before using Media Player read the COM PATIBLE USB STORAGE DEVICES sec tion or the paragraph regarding iPods in order to make sure that your USB device is compatible with Blue amp Me CONNECTING A USB DEVICE TO Blue amp Me To connect your USB device to Blue amp Me proceed as follows O Copy the tracks onto your USB device USB devices without USB cable sim ply connect the USB device directly or with an extension lead to the USB port on the car see fig 1 USB devices with USB cable use the ca ble to connect the USB device to the USB port on the car see fig 1 O Turn the ignition key to MAR Blue amp Me will automatically start to play your digital tracks selecting them from the library that is created when the USB device is connected O If AUTOPLAY is set to ON Blue amp
77. r call history list by selecting the desired contact in the LAST CALLS or PHONEBOOK submenu Furthermore you can respond to in coming calls redial an engaged number receive a call alert read an SMS message or delete it gt If you encounter difficulties using phone functions with the car s hands free system refer to the chapter HANDS FREE TROUBLESHOOTING Notes O Before you can make and receive phone calls using the hands free system you must create a pairing relationship for your mobile phone gt For more information refer to the chap ter SETTING FUNCTIONS PAIRING A MOBILE PHONE O To activate the hands free system the ignition key must be turned to MAR O If during a phone call you turn the igni tion key to STOP you can continue your conversation through the hands free system for a further 15 minutes MAKING A PHONE CALL A call can be made in one of the follow ing ways O Calling a contact in your phonebook O Dialling a phone number using voice commands O Dialling a phone number using the mo bile phone keypad O Calling a phone number using call his tory last calls g Call the sender of a received SMS mes sage gt For more information refer to the chap ter SMS MESSAGE READER FUNC TIONS MANAGING SMS messages 19 BLUE amp ME BLUE amp ME 20 Calling a name in the phonebook You must create a pairing relationship and download your mobile phone
78. r responsibility to monitor voice recognition functions included in the system and address any errors Danger of distraction the functions may require manual settings not using voice commands Attempting to perform such setup or insert data while driving can seriously distract your attention and could cause an accident or other serious consequences Stop the vehicle in a safe and legal manner before attempting these operations BLUE amp ME BLUE amp ME DISPLAY AND CONTROLS ON THE STEERING WHEEL MATH MENU 220 PHONEBOOK Button Short press Long press less than second more than second N MENU Activate the Main Menu of Blue amp Me Reject an incoming phone Confirm selected menu option call Accept an incoming phone call End the phone call Switch between two ongoing phone conversations in progress ie waiting Select the message displayed IESC Deactivate voice recognition Interrupt a voice announcement Interrupt the reading of an SMS message Exit from the Main Menu of Blue amp Me Exit from a submenu and return to the previous menu option Exit from the current menu option without saving Turn the microphone on off during a phone conversation Mute the ring tone of an incoming call Media Player Pause on off ay Enable voice recognition Repeat the last voice Interrupt voice announcement to provide a new voice command message given
79. r through the car radio or the steer ing wheel controls The car radio display shows dedicated messages to inform you that the audio sys tem is being used by Blue amp Me 17 BLUE amp ME BLUE amp ME Blue amp Me FUNCTION MENU The Blue amp Me Main Menu shows the options in a list which is shown on the in strument panel display The Blue amp Me system settings can be changed or the functions activated by using the available options The Main Menu includes the following op tions O LAST CALLS this submenu allows you to view a list of recent calls made or received This list is either downloaded from your mobile phone memory or updated during use of the hands free system or both O PHONEBOOK this submenu allows you to view the phone numbers in your phonebook and to select one to dial If there is a large number of entries in your phonebook they will be grouped in al phabetical submenus The number of contacts within a group depends on the number of entries in your phonebook O SMS MESSAGE READER only for mobile phones which support this function This submenu allows you to read the last SMS message received call the sender of the SMS message or delete the last SMS message received You can store up to 20 text messages in a dedicated inbox and listen to them later call the sender or delete them You can also set the notification meth ods for SMS messages received O MEDIA PLAYER this subme
80. rmation message is displayed since pressing S MENU or JESC be forehand may cancel the pairing process If pairing fails an error message will be displayed and the pairing procedure will have to be repeated At the first pairing the system will provide a welcome message imme diately after connecting This mes sage will not be repeated for the subsequent connection procedures for the same phone The system asks if you would like to copy the phonebook of the phone that you have just paired Copying the phonebook is recommended To copy the phonebook press SRC OK or N MENU Other wise press MIESC You can down load your phonebook later using the SETTINGS USER DATA PHONEBOOK option For certain mobile phones the phonebook is not copied automat ically in this case you must trans fer the contacts using your mobile phone keypad see the Adding con tacts paragraph gt Or using voice interaction Press a and say Settings then at the end of the message supplied by the system say Pairing The system displays the pairing PIN on the instrument panel display and repeats it out loud For the next two stages consult your mobile phone manual for the pairing and connecting mode through Bluetooth devices On your mobile phone search for devices with Bluetooth technol ogy that are within range this op tion on your mobile phone might be called Search New Device etc View the list of B
81. s Opens the SETTINGS menu of the hands free system Media file settings Opens the MEDIA PLAYER menu Open the USER DATA MENU e Pairing e Pair Activates new mobile phone pairing procedure e Advanced options Opens the ADVANCED OPTIONS menu _ e Delete users e Delete phonebook Download phonebook Add contacts e Reset all Deletes user data for the pairing relationships of all users Deletes current phonebook Downloads phonebook from connected mobile phone to hands free system Note Function available on phones with phonebook management only Transfers contacts from connected mobile phone to hands free system Note Function available on phones with single contact management only Deletes pairing data and phonebooks contacts of all paired telephones and restores the hands free system default settings If your phone is provided with a function for automatically transmitting the phonebook via Bluetooth technology the en tire phonebook will be automatically copied to the hands free system during the pairing procedure If your phone has a function for transmitting single phonebook contacts via Bluetooth technology during pairing you will be asked to transfer names from the phonebook using your phone 55 BLUE amp ME BLUE amp ME 56 TROUBLESHOOTING HANDS FREE General cases Problem The display shows NO PHONEBOOK Probable Cause Mobile
82. s essential to minimise back ground noise in the car and that the oth er passengers do not speak while you are dictating the number Since the system op erates irrespective of who is speaking it will recognise other voices there is there fore the risk that some numbers are recognised incorrectly added to correct numbers or not recognised 21 BLUE amp ME BLUE amp ME 22 Dialling a number using the mobile phone keypad Alternatively you can dial a phone number using your mobile phone keypad and then continue your conversation using the hands free system For this operation you must create a pairing relationship and bring the mobile phone within range of the hands free system of your car To dial a phone number using your mobile phone keypad proceed as follows O Dial the phone number on your mobile phone keypad and make the phone call following the pro cedure required by your mobile phone O Conduct the conversation using the hands free system O To end the call press MENU for more than one second or use the appropriate button on your mobile phone Dialling a number using call history last calls The LAST CALLS option is a list of calls made or received It can consist of up to ten incoming calls ten outgoing calls and five missed calls a We To dial a phone number using man ual interaction proceed as follows O Activate the Main Menu by press ing MENU O
83. stem use the following guidelines O After pressing a give the voice com mand after the system provides the au dible signal that indicates that voice recognition is active O After the system has asked you a ques tion wait a second before giving the an swer in order to be sure that voice recognition is active O If you want to give a command without waiting for the system to finish its an nouncement or question you can press al again briefly to interrupt the system and give your command O Speak at a normal volume O Pronounce words clearly not too quickly but without interruptions O If possible try to minimise noise inside the car O Ask the other passengers not to talk before you give voice commands This is to prevent misunderstanding since the system may recognise other words in addition to or different from your voice command if several people are speaking O If your car has a sun roof you are ad vised to close it before using voice recognition Notes For countries where a version in the na tive language is not available voice recog nition of the different commands and above all phonebook contacts may be dif ficult You are therefore advised to adopt a pronunciation accent that conforms to the language present on Blue amp Me To change the voice recognition language contact a Abarth Dealership or consult the dedicated area on www fiat com DISPLAY The various options in the Blu
84. t Switch reader off Deactivate reader e Visual and acoustic signal t Visual and audible Acoustic e Visual plus acoustic gt Visual signal only e Visual e Visual only Reads the selected message in the inbox Calls the number of the selected message Cancels the call to the number of the selected message Goes to the next message Goes to the previous message Turns the SMS message reader off when anew SMS message is received there will be no notification and nothing will be transmitted to the system Signals both visually using the display on the instrument panel and audibly through a beep the arrival of a new SMS message Signals only visually using the display on the instrument panel the arrival of a new SMS message 51 BLUE amp ME BLUE amp ME 52 TABLE OF MEDIA PLAYER VOICE COMMANDS e Media player e Media e Music e Play e Play music e Play media Stop e Stop music Stop media Next Next track Next song The one after Forward e Previous e Previous track e Previous song The one before Shuffle on Random order off Shuffle off Activates the MEDIA PLAYER MENU m Starts playing digital audio files Stops playing digital audio files Next track Goes to the previous track Turns the shuffle function on Turns the shuffle function off continued gt lt gt continued e Loop
85. tected by law and international treaties on the protection of intel lectual property The SOFTWARE is licensed not sold All rights are reserved IF YOU DO NOT ACCEPT THIS END USER LICENSE AGREEMENT EULA YOU ARE REQUESTED NOT TO USE THE SYSTEM AND NOT TO COPY THE SOFTWARE INSTEAD WE ASK YOU TO CONTACT FIAT AUTO S p A AS SOON AS POSSIBLE REGARDING THE RETURN OF THE UNUSED SYSTEM ANY USE OF THE SOFTWARE INCLUDING BUT NOT LIMITED TO USE OF THE SYSTEM WILL CONSTITUTE YOUR ACCEPTANCE OF THIS EULA OR CONFIRMATION OF ANY APPROVALS PREVIOUSLY GRANTED GRANTING OF THE SOFTWARE LICENSE This EULA grants you the following license You can use the SOFTWARE as installed on the SYSTEM DESCRIPTION OF OTHER RIGHTS AND RESTRICTIONS Voice recognition If the SOFTWARE contains one or more components with voice recognition remember that voice recog nition is an intrinsically statistical process and that errors in voice recognition are part of the process itself Neither Fiat Auto S p A nor its suppliers will be liable for any damage resulting from errors in the voice recognition process Restrictions on Reverse Engineering Decompilation and Disassembly You are not authorised to carry out reserve en Restrict R Eng g D pilat dD bly Y t auth dt y out gineering on the SOFTWARE nor to decompile it or disassemble it except as expressly permitted by applicable law notwith standing this limitation 73 BLUE amp ME BLUE
86. tting the phone book via Bluetooth technology the en tire phonebook will automatically be copied to Blue amp Me during the pairing procedure To see the list of supported mobile phones and functions consult the dedicated site www fiat com Blue amp Me section or call Customer Services on 00800 222784 00 Here you can find O a quick guide with tips for use O a mobile phone pairing guide O tips for connecting an iPod O the ten available voice recognition lan guage files that can be downloaded al ternatively onto Blue amp Me Italian French English German Spanish Por tuguese Dutch Polish Brazilian Turk ish Mobile phones with single contact management function If your phone has a function for sending single phonebook contacts via Blue tooth technology during pairing you will be asked to transfer names from the phonebook using your phone Mobile phones with SMS message management not all mobile phones support the incoming SMS message reading function If your mobile phone has a function for transmitting SMS messages using Blue tooth technology incoming SMS mes sages can be read by the Blue amp Me hands free system The messages can be stored in a specific inbox or deleted SUPPORTED USB STORAGE DEVICES USB STORAGE DEVICES Media Player supports most USB 1 0 1 1 or 2 0 storage devices that can be con figured as an external disk mass storage device Notes It
87. ue amp Me system EXITING FROM THE SETTINGS MENU At the end of any operation you can ex it from the settings menu as described below a We To exit from the SETTINGS menu using manual interaction Select the EXIT option and press SRC OK or MENU Or using voice interaction Press al and say Exit 43 BLUE amp ME BLUE amp ME 44 TECHNOLOGIES SUPPORTED BY Blue amp Me Blue amp Me communicates with your personal devices via Bluetooth tech nology and USB To get updated information on the com patibility of personal devices with Blue amp Me contact a Abarth Dealership or go to the dedicated area on www fiat com MOBILE PHONES WITH Bluetooth TECHNOLOGY Blue amp Me supports most mobile phones supporting the Bluetooth 2 0 specification and hands free profile 1 5 re fer to Bluetooth connection specifica tions given in your mobile phone user manual As a result of the different software ver sions available on the market for differ ent models of mobile phone some addi tional functions e g second call manage ment call transfer from hands free system to mobile phone and vice versa etc may not correspond exactly to the description in the user manual In any case the pos sibility of having a hands free conversation is not compromised Mobile phones with phonebook management function If your phone is provided with a function for automatically transmi
88. vate the Main Menu select the MEDIA PLAYER option then press SRC OK or W MENU Select USB OPTIONS then press SRC OK or MENU Select the ARTISTS option then press SRC OK or W MENU Scroll through the artists available To select the displayed artist press SRC OK or VWMENU Scroll through the albums by artist To play all the albums of an artist select the PLAY ALL option and press SRC OK or MENU To play an album select the album then press SRC OK or MENU To play a track of an artist select the title then press SRC OK or N MENU gt Or using voice interaction u Press am and say Media Player then USB options and finally Artists Scroll through the albums by artist manually To listen to all the artist s albums select the PLAY ALL option then press SRC OK or N MENU To play an album select the album then press SRC OK or NMENU To play a track of an artist select the title then press SRC OK or N MENU Note If your USB device contains many audio files the ARTISTS menu may be subdi vided into alphabetical submenus An al phabetical submenu may display just the first letter of the tracks that it contains e g A F or it may display the first two letters e g Aa Ar Selection by genre A To select all the tracks of a particu lar genre using manual interaction proceed as follows Activate the Main Menu select the MEDIA PLAYER option then press
89. y it is howev er possible to play a selection of tracks Blue amp Me will continue to create the library while playing music Creating a playlist for Blue amp Me To create a wpl playlist for Blue amp Me us ing Microsoft Windows Media Player proceed as follows O Copy all the songs that you want to put in the playlist into a new folder or on to your USB storage device J Open Microsoft Windows Media Player From the menu choose File Open O Scroll through the content of the USB device connected to your computer and select the audio file that you want to put in the playlist O Click on Open O Move to File and select Save Playlist As Enter a name for your playlist in the File name field then in the Save as field set the type wpl Click on Save After this a new wpl file will be created USB SETTINGS Autoplay When Autoplay is on Blue amp Me will start to play the audio files on your USB device as soon as you turn the ignition key to MAR Once you activate this option the first time you use the player playback will start automatically 35 BLUE amp ME BLUE amp ME 36 To change the Autoplay setting using manual interaction proceed as follows Enter the Main Menu select ME DIA PLAYER SET USB AU TOPLAY then press SRC OK or N MENU To activate Autoplay select AU TOPLAY ON and press SRC OK or MENU To deactivat

Blue&Me - AD FS 2.0 Authentication Web site

Contents

Download Pdf Manuals

Related Search

Related Contents

Blue&amp;Me - AD FS 2.0 Authentication Web site

Contents

Download Pdf Manuals

Related Search

Related Contents

Blue&Me - AD FS 2.0 Authentication Web site