Home

Ranger 8980e_man - Protection Systems Inc.

1. fo LOCATION 209 FORMAT OVER RIDE LOCATION The number programmed in this location will select the available format options NOTE You must use DTMF transmission for the Pager format to function VALUE DESCRIPTION Add for Contact ID Add for SIA Add for 4 3 8 Add for DTMF transmission LOCATION 210 PROGRAMMING TO REPORT EXIT ERROR The Ranger 8980E has the ability to report an exit error code if an entry exit zone is violated at the moment the exit delay expires The desired exit error code is programmed in location 210 If this location contains 0 exit errors will not be reported When using 4 2 format the number programmed in this location is sent as the tens digit The ones digit is automatically the man number When using the remote arming input the man number is 1 When using a one button Quick Arm code the man number is 1 LOCATION 211 PROGRAMMING TO REPORT RECENT CLOSING The Ranger 8980E has the ability to report a recent closing code if an alarm occurs within 5 minutes of a closing The desired recent closing code is programmed in location 211 If this location contains a 0 recent closings will not be reported When using 4 2 format the number programmed in this location is sent as the tens digit The ones digit is automatically the man number When using the remote arming input the man number is 1 When using a one button Quick Arm code the man number is 1 When using auto arm the man numb
2. 212215 26 216219 26 USER 9AaRM DISaRmCODE 220223 26 useR oarm Disanmcooe 224007 26 USERHIARM DISARMcoDE 228 231 USER 12 ARM DISARM CODE 23225 26 USER 3ARM DISARMCODE 236 239 26 USER4ARM DISARMcoDE 4 2 26 NUMBEROFDIALATTEMPTSTOPHONE 2 O m 2 usun S 242 26 RESERVED 26 ENTRY KEYPAD SOUNDER 243 2 ZONE 1 SPECIAL CHARACTERISTICS 25 27 ZONE 2 SPECIAL CHARACTERISTICS 246 2 ZONE 3 SPECIAL CHARACTERISTICS ZONE 4 SPECIAL CHARACTERISTICS GROUP BYPASS ZONE 248 27 ZONE 5 SPECIAL CHARACTERISTICS a 27 ZONE 6 SPECIAL CHARACTERISTICS 250 27 ZONE 7 SPECIAL CHARACTERISTICS ZONE 8 SPECIAL CHARACTERISTICS AUXILIARY 3 COMMUNICATOR CODE 27 USER ON SITE COMMUNICATOR CODE 7 CROSS ZONING TIME MINUTES 252 2 2 AUXILIARY 3 EXTENDED COMMUNICATOR CODE REMEMBER AFTER ALL DATA HAS BEEN ENTERED PRESS 9 2 0 TO STORE DATA IN EEPROM DOWNLOADING ACCESSIBLE LOCATIONS Pase vescrimnon _ ur 256263 28 controLpaneLaccessconve ssoooooo 264 271 CALLBACK PHONE NUMBER DIGITS 1 8 0 DISABLED 272279 26 CALLBACK phone numser Dieis o 16 f seso ANSWERING MACHINE DEFEAT fonse 2 26 LOcALPROGRAMMINGLocKoUT NOT LOCKED 22 2
3. The 8980E is capable sending certain reports to the secondary telephone number This feature known as split reporting can be used to send alarm reports to one number and supervisory reports to another number When using split reporting with the 8980E the primary telephone number always takes priority over the secondary telephone number The 8980E always sends zone and alarm reports to the primary telephone number There are 7 reports that can be programmed to report to the second telephone number Location 176 is used to force up to three of these individual reports to the second telephone number To program tamper download complete or autotest to report to the secondary telephone number use the following chart and program the appropriate number in location 176 For Dual Reporting see locations 204 206 REPORTS TO SEND TO SECONDARY NUMBER DATA TO PROGRAM IN LOCATION 176 AUTOTEST C DOWNLOAD COMPLETE xr Y O DOWNLOAD COMPLETE AUTOTEST xr TAMPER TAMPER AUTOTEST TAMPER DOWNLOAD COMPLETE AMPER P 21 LOCATION 177 SPLIT REPORTING PROGRAMMING AC POWER FAIL LOW BATTERY OPEN CLOSE AND MAINTENANCE OPEN CLOSE TO REPORT TO THE SECONDARY PHONE NUMBER The 8980E is capable sending certain reports to the secondary telephone number This feature known as split reporting can be used to send alarm reports to one number and supervisory reports to another number When using split reporting with the 8980E the primary tel
4. 086 087 DURESS COMMUNICATOR CODE ee 088 089 AUX 1 COMMUNICATOR CODE DISABLED 090 091 AUX 2 COMMUNICATOR CODE DISABLED KEYPAD PANIC COMMUNICATOR CODE 0 DISABLED 096 097 DOWNLOAD COMPLETE COMM CODE DISABLED 098 099 AUTOTEST COMMUNICATOR CODE 0 DISABLED 100 101 12 FAILURE TO COMMUNICATE REPORT 0 DISABLED 29 LOCATION PAGE DESCRIPTION EVENT EXT CODE DEFAULT 402 12 CLOSING COMMUNICATOR CODE MANNUMBER o DISABLED 103 12 OPENING COMMUNICATOR CODE MAN NUMBER 0 DISABLED 104105 13 zone1communicarorcooe J on 106 107 13 zone2communicarorcooe J Tz 108 109 zonescommunicarorcooe J o soe 13 zone4communicarorcooe J on 23 13 zonescommunicarorcooe Te 114 115 ZONE 6 COMMUNICATOR CODE 13 ZoNE7CommuNicaToRcopE J 1 118119 13 J Ete 120121 13 AcPoweRLosscommunicatorcope Jo sap 122423 14 Low Battery communicator cone Or ISABLED 12 4 TROUBLECOMMUNIcATORGODE ZONENUMBER DISABLED 125 14 ZoNEByPASSCOMMUNIcATORGODE ZONE NUMBER O DISABLED 14 RESTORE communicator cone ZONE NUMBER DISABLED 107 14 communicator cone MANNUMBER O DISABLED LOCATION PAGE DESCRIPTION DATA DEFAULT aBoRTenase rise 14 KEYPADPANIGSILENTORAUDIBLE oaee O 130 14
5. 0 AC power failures will not be reported Location 120 contains the standard digit and location 121 contains the extended digit When using 4 2 format the number programmed in location 120 is sent as the ones digit The tens digit is programmed in location 121 13 LOCATION 122 123 PROGRAMMING REPORT LOW BATTERY The Ranger 8980E can perform a dynamic battery test and report a low battery code when the battery has discharged down to 10 3 volts The desired low battery code is programmed in locations 122 123 If both locations are 0 low battery will not be reported Location 122 contains the standard digit and location 123 contains the extended digit When using 4 2 format the number programmed in location 122 is sent as the ones digit The tens digit is programmed in location 123 LOCATION 124 PROGRAMMING FOR PRIORITY ZONE TROUBLE REPORTING The Ranger 8980E has the ability to report a trouble code each time a Priority zone opens The desired trouble code is programmed in location 124 If this location contains a 0 the Priority Trouble will not be reported LOCATION 125 PROGRAMMING FOR ZONE BYPASS REPORTING The Ranger 8980E has the ability to report a bypass on zones 1 8 The desired bypass code is programmed in location 125 If this location contains a 0 zone bypass will not be reported When using 4 2 format the number programmed in this location is sent as the tens digit The ones digit is the zone communica
6. Autotest RP 99 Fail to Communicate RT 101 Closing CL 102 Opening OP 103 AC Loss AT 121 Low Battery YT 123 Trouble T 124 Bypass B 125 Bypass Restore U 1251126 Restore R 126 Cancel OC 127 Maintenance Open OP 172 Maintenance Close CL 173 Exit Error EE 210 Recent Closing CR 211 Auxiliary 3 UA 253 User on site YY 254 These will send the event code for the zone bypassed restored or in trouble 33 APPENDIX 2 REPORTING IN CONTACT ID The 8980E has the ability to report Ademco Contact ID transmissions to either or both phone numbers Each report in Contact ID consists of an Event Code and a Zone or User ID The zone or User ID is programmed in the first digit of each report When programming the event code the second digit for zones 1 8 locations 105 107 109 111 113 115 117 or 119 programming a zero will cause the event code to follow the zone type for that zone The event code for the zone type can be overridden by programming a digit from the table below Duress location 87 AUX 1 location 89 AUX 2 location 91 and keypad Panic location 93 must be programmed from the table below Programmed Event Code Contact ID Code Description 0 122 Silent Panic for Loc 93 only 1 110 Fire Alarm 2 120 Panic alarm 3 130 Burglary Alarm 4 131 Perimeter Alarm 5 132 Interior Alarm 6 133 24 Hour Burglary 7 134 Entry Alarm 8 135 Day Night Alarm 9 150 Non Burglary 24 Hour 10 121 Duress Alarm 11 100 Medical Alarm 12 123 Audib
7. NUMBER OF ALARMS FOR SWINGER SHUTDOWN Or DISABLED 131 15 AUTO BYPASS INSTANT ARMING 0 DISABLED 132 15 SIREN DRIVER OR VOLTAGE OUTPUT LASTCHANCETOEXITBEEP DRIVERwBEEP 15 LeDextiNauisHreaTunE or ise 134 15 NUMBER OF DIAL ATTEMPTS 8 EIGHT ATTEMPTS 13 5 powerupconomon 0 LST CONDITION 13 16 orc SEG DELAY 137 15 Tors 15 NOARMINGWITHZONEBYPASSED o 16 oucka per fosen 1 16 FiResiReNcUTOFFINNpT torres m 16 SPECIALKEVPADCOMMANDFUNCTIONS Tt 12 6 SiRENBELLTESTFEATURE TC ors 5 16 SMOKE POWER RESET AND OR FIRE ALARM VERIFICATION 1 POWER RESET 14 16 EUROPEANPULSEDIALRATION pse A 7 Auxwianvourpurat 1 146 17 AUXILIARY OUTPUT 2 1 FIRE ALARM 17 auxwianvourpur s PANCGUDURES 1s w Auxiianvourpur a 3 ARMED STATE 17 INVERTING THE AUXILIARY OUTPUTS 149 1 17 DELAY AC POWERLOSS REPORT 3 6MINUTES 151 18 NUMBER OF RINGS TO ANSWER DOWNLOAD CALL S EIGHT RINGS 152 18 NUMBER OF DAYS LEFT UNTIL AUTOTEST 0 HIGH GOING LOW UNDEFINED 30 LOCATION PAGE DESCRIPTION DATA DEFAULT 155 18 PROGRAMCLOCK CURRENTMONTH _ UNDEFINED 154 18 PROGRAM CLOCK CURRENT YEAR TENS DIGIT 1994 UNDEFINED 155 18 PROGRAM
8. Note A 0 entry is treated as zero 0 seconds If the exit delay time in this location is less than that of location 076 this secondary delay will follow the amount of time in location 076 NOTE ACCORDING TO SEC 26 OF U L 1023 THE SECONDARY EXIT TIME SHALL NOT EXCEED 60 SECONDS LOCATION 180 PROGRAMMING THE LOOP RESPONSE TIME Location 180 is used to program the loop response time for all zones programmed as fast loop response in locations 186 193 The response time is equal to 20 milliseconds times the number programmed in this location 1 20 milliseconds and 5 100 milliseconds If this location contains a 0 the loop response time will be 500 milliseconds 22 LOCATION 181 PROGRAMMING FOR HOURLY AUTOTEST AUTO SET CLOCK Location 181 can be used to activate several different conditions Using the chart below add the values of the desired activations and program the sum of those values in location 181 Factory default is 0 disabled VALUE DESCRIPTION Autotest reports will be suppressed if the communicator has sent a report since the last Autotest 2 Autotest in hourly increments and reset hourly timer when a communication is sent to the receiver Call download computer to reset clock after power down LOCATION 182 FORMAT OVER RIDE LOCATION The number selected in this location will select the format options as follows VALUE DESCRIPTION 1 Add for extended reporting Add for h
9. S Foss AVAILABLE ZONE TYPES S TYPES DAY ZONE When armed a trip produces an instant alarm When disarmed a trip activates the keypad sounder 24 HOUR A trip on a 24 Hour zone produces an instant alarm when armed or disarmed ENTRY EXIT A trip will start entry delay The lack of a trip during exit delay will enable the Automatic Bypass or Instant mode if so programmed INTERIOR DELAY A trip on Interior Delay zone will initiate an entry delay It will be ignored during exit delay and when disarmed INTERIOR FOLLOWER Interior zone that follows the delay zones It is instant during non delay times It can be bypassed before arming or by allowing it to automatically be bypassed in the Automatic Bypass Instant mode if so programmed en INSTANT Produces an instant alarm if tripped when armed Ignored when disarmed 7 24 HOUR SILENT trip 24 hour silent zone will communicate to the central station when the Ranger 8980E is armed or disarmed FIRE PRIORITY WHEN AHJ HAS NOT APPROVED A short on a FIRE zone non bypassable will to the central station when the Ranger aE is armed or disarmed An open will create a Trouble condition Keypad LED will be steady for FIRE and flashing for Trouble SECONDARY DELAY A secondary delay zone works like an entry exit delay zone but has its own independent delay time see locations 178 179 SUPERVISED 24 HOUR SILENT A trip on a Supervised 24 hour silent zone will
10. after data has been entered into locations 000 255 you must enter 9 2 0 to permanently load the information into the EEPROM IF THIS STEP IS NOT TAKEN THE DATA IN THE EEPROM WILL NOT CHANGE AND THE RANGER 8980E WILL NOT CHANGE CHARACTERISTICS 9 3 0 This function code is used to exit the programming mode after it was accessed via the Keypad 2 3 0 This function code is used to exit the programming mode after it was accessed via the 9050 LCD Keypad PROGRAMMING EXAMPLE FIGURE 2 Amed co Amed Ready Ready Instant Instant Power Power 22 zone 1 Zone 2 2 Zone 3 4 Zone 4 zone 5 Zone 5 zone zone zone 7 zone 7 zone 8 Zone 8 LED 1 ZONE 2 LED 2 ZONE 4 LED 8 DAIN S2 ZONE 3 LED 4 DAG No LED s Illuminated 0 Amed Ready r Instant Beel Power zone 1 zone 2 zone 3 zone 4 DISIGIS zone 5 Zone zone 7 zone 8 To change or enter data in Pressing the Key will advance location shown enter data and To next location or specific loca follow by the gt Key tion can be reached by pr
11. excluding 24 hour zones are delayed during the exit delay time Programming 2 in this location will make Instant zones Instant during the exit delay time LOCATIONS 198 201 AUTOMATIC ARMING TIME Locations 198 201 contain the time for automatic arming if enabled in location 202 Enter the time in 24 hour military time LOCATION 202 AUTOMATIC ARMING Programming 1 location 202 will enable Automatic Arming The arming time is programmed in location 198 201 If Automatic Arming is enabled the keypad sounder will activate for 50 seconds before automatically arming If the sounder is silenced by entering a valid arm disarm code during the 50 second time frame the panel will not arm If the sounder is still on at the end of 50 seconds the control will arm Any zones not secured will be bypassed when Automatic Arming is used Note This feature shall be disabled for U L listed systems LOCATION 203 DYNAMIC BATTERY TEST The number programmed in location 203 determines the number of minutes 1 to 15 the 8980E will perform Dynamic Battery testing during each 24 hour period The red Power LED will flash if the battery fails the Dynamic Battery Test Factory default is 0 disabled NOTE The clock must be set locations 153 161 for Dynamic Battery Test to function LOCATION 204 DUAL REPORTING PROGRAMMING TAMPER DOWNLOAD COMPLETE AND AUTOTEST TO REPORT TO THE BOTH PHONE NUMBERS The 8980E is capable of sending cert
12. 8980E allows downloading of custom information to 9050 LCD keypads 4 8980E has a Fire Alarm Verification feature which can be enabled by programming a 2 in location 143 5 The AC power loss delay feature is now programmable in 2 minute increments from 0 14 minutes It will also delay the same time when reporting an AC power restore Do not program a number more than 7 6 The 8980E has an 80 event log which stores all events and can be viewed through the download software 7 Keyswitch arming is allowed through the remote arming input on the PC board Armed and Ready LED s can be obtained through the auxiliary outputs 8 Instant zones are delayed during the exit delay time This can now be changed by programming 2 in location 197 see page 27 Location 197 Force Arming NOTE 9 The entry delay pre alarm will no longer override the pulsing keypad sounder which notes a previous alarm 10 The PCB remote arming pins can be converted to a remote keypad panic zone see Location 141 page 16 11 A Supervised 24 Hour Silent zone has been added to the available zone types see zone type chart page 11 28 ARM DISARM CODES 1 7 LOCATION PAGE DESCRIPTION DATA1 DATA2 DATA3 DATA4 DEFAULT 000 003 9 USER 1 ARM DISARM CODE 1 2 3 4 004 007 USER 2 ARM DISARM CODE Pd ts DISABLED 008 011 USER 3 ARM DISARM CODE _ DISABLED O12015 10 useR aanm oisarmcope pse 016019 usEnisan
13. AUTOTEST TIME REPORTING INTERVALS Location 166 contains the number of days between automatic test reports If a report is desired every 7 days this location should contain a 7 Valid entries are 1 to 15 days LOCATION 167 PROGRAMMING FOR ROTATING MAINTENANCE CODES The Ranger 8980E has the ability to automatically generate a different MAINTENANCE arm disarm code daily This code is produced using the current date programmed in locations 153 157 and the 4 digit complex or seed code programmed in locations 168 171 This code can then be generated by using the CG 800 Code Generating Software which is designed to operate on a DOS based personal computer If this location contains a 1 the maintenance code is enabled and the code will change daily If this location contains a 3 the code will change on the first day of each month If location 167 contains 0 this feature is disabled and the user 7 arm disarm code will be the code programmed in locations 024 027 NOTE Activating the maintenance code will automatically disable the duress code regardless of what is programmed in locations 086 087 NOTE FOR U L GRADE A INSTALLATIONS THIS FEATURE SHALL BE DISABLED 19 LOCATION 168 171 PROGRAMMING THE SEED CODE FOR ROTATING MAINTENANCE CODES Locations 168 171 contain the complex or seed code required to generate rotating maintenance codes as described in the paragraph above These locations allow a unique set of codes for
14. OPEN CLOSE amp MAINT OPEN CLOSE d 22 SECONDARVENTRYDELAYTIME 22 SECONDARYEXITDELAVTIME Tt 22 LoopRespoNseTIME Tf oss 23 HOURLY AUTOTEST AUTOSETCLOCK 23 RIDE 23 FORMATOVER RIDE S Me ee 184 185 23 RESERVED RESERVED 14 14 14 14 14 14 14 14 0 DISABLED 3 30 SECONDS 0 DISABLED 0 DISABLED ZONE 1 SPECIAL CHARACTERISTICS ZONE 2 SPECIAL CHARACTERISTICS ZONE 3 SPECIAL CHARACTERISTICS ZONE 4 SPECIAL CHARACTERISTICS 23 ZONE 5 SPECIAL CHARACTERISTICS 191 23 ZONE 6 SPECIAL CHARACTERISTICS a 23 ZONE 7 SPECIAL CHARACTERISTICS ee TELEPHONE LINE FAULT MONITOR 1 8 188 NX 23 23 23 3 2 2 BYPASS CAPABILITY TELEPHONE LINE FAULT MONITOR _ 9 NX 23 23 23 24 24 24 4 2 2 24 TIME FOR AUTOMATIC ARMING MINUTE TENS DIGIT 24 TIME FOR AUTOMATIC ARMING MINUTE ONES DIGIT LOCATION DESCRIPTION DATA DEFAULT 201 AUTOMATIC ARMING ENABLE 24 AUTOMATIC ARMING ENABLE C DYNAMIC BATTERY TEST sai ro a 24 24 24 25 5 DUAL REPORT EVERYTHING CALLBACK PHONE NUMBER CONTROL FORMAT OVER RIDE C FORMAT OVER RIDE 6 poo DUAL REPORT TAMPER DOWNLOAD COMPLETE amp AUTOTEST 0 PHONE 1 DUAL REPORT AC FAILURE LOW BAT OPEN CLOSE MAINT OPEN CLOSE 0 PHONE 1 m 26 RECENTCLOSING COMMUNICATOR CODE 9
15. can be accessed from the program mode only LOCATIONS 024 027 PROGRAMMING THE DURESS CODE OR USER 7 Locations 024 027 contain the arm disarm code for Duress or for user number 7 Duress capability is enabled by programming a communicator code in locations 086 087 If locations 086 087 are left unprogrammed user number 7 will act as a standard user code If the maintenance code option is selected in location 167 locations 024 027 should not be programmed LOCATIONS 028 031 PROGRAMMING THE GO TO PROGRAM ACCESS CODE Locations 028 031 contain the Go To Program access code Location 028 contains the first digit of the code and location 031 contains the fourth digit of the code THE CODE MUST CONTAIN FOUR 4 DIGITS With the Ranger 8980E disarmed the Go To Program access code can be used to enter the program mode To disable the Go To Program access code program a 15 in location 028 The factory default setting is 9 7 1 3 LOCATIONS 032 074 SEE PAGES 8 amp 9 LOCATION 075 PROGRAMMING THE ENTRY DELAY TIME Location 075 contains the number of 10 second increments in the entry delay The entry delay can be programmed in 10 second increments from 10 to 150 seconds 1 10 seconds through 15 150 seconds For example programming a 2 in this location will produce an entry delay of 20 seconds Note A 0 entry is treated as 0 seconds Programming a 6 in this location will produce an entry delay of 60 seconds Factory def
16. different buildings or complexes NOTE ACTIVATING THE MAINTENANCE CODE WILL AUTOMATICALLY DISABLE THE DURESS CODE REGARDLESS OF WHAT IS PROGRAMMED IN LOCATIONS 086 087 LOCATION 172 PROGRAMMING USER 7 OR MAINTENANCE CODE OPENING COMMUNICATOR CODE The Ranger 8980E has the ability to give an opening report each time user number 7 disarms the control The desired opening code should be programmed in this location This feature can be used in conjunction with the rotating maintenance code to give an opening report each time the maintenance code is used to disarm When using an extended format the extended code will always be a 7 LOCATION 173 PROGRAMMING USER 7 OR MAINTENANCE CODE CLOSING COMMUNICATOR CODE The Ranger 8980E has the ability to give a closing report each time user number 7 arms the control The desired closing code should be programmed in this location This feature can be used in conjunction with the rotating maintenance code to give a closing report each time the maintenance code is used to arm When using an extended format the extended code will always be a 7 CAUTION If a Quick Arm code has been selected and the first digit of the rotating maintenance code is the same digit as the Quick Arm code the maintenance closing code will not be reported LOCATION 174 PROGRAMMING ZONES 3 THRU 6 FOR NORMALLY CLOSED OPERATION ONLY Location 174 is used to program zones 3 4 5 amp 6 for normally closed operation only eliminating t
17. it will power up armed If this location contains 0 the Ranger 8980E will maintain the condition it was in at power down A watchdog circuit reset will cause the Ranger 8980E to reset to the selected condition LOCATION 136 POWER UP DELAY Ifa 1 is programmed in location 136 the Ranger 8980 will not delay 60 seconds before accepting open or short inputs from any zone If a 0 is programmed sensors all zones are allowed 60 seconds to stabilize at power up After 60 seconds the Ranger will once again accept loop opens or shorts as an alarm condition This 60 second period will also be initiated after exiting the program mode or a watchdog circuit reset condition LOCATION 137 IMMEDIATE RESTORE BY ZONE If a 1 is programmed in location 137 restoral signals will follow the restore condition and report restores immediately after the condition has unfaulted A non extended format will not send a restore message until all zones and trouble conditions have restored If this location contains 0 the restore signal or signals will be reported only after siren timeout LOCATION 138 NO ARMING WITH A ZONE BYPASSED If a 1 is programmed in location 138 the Ranger 8980E will not arm with any zone bypassed If programmed with 0 up to 7 of the 8 burglary zones can be bypassed and the Ranger 8980E can still be armed If an 8 is programmed in Location 138 the Ranger 8980E will not initiate the Keypad Sounder when either arm
18. programmed in location 252 is sent as the ones digit The tens digit is programmed in location 253 LOCATION 254 PROGRAMMING TO USER ON SITE The 8980E has the ability to send a user on site report by entering 0 followed by a valid arm disarm code at the keypad when the system is not armed This can be used to log the return of latch key kids or the presence of employees The desired user on site code is programmed in location 254 If this location contains a 0 user on site report will not be sent When using 4 2 format the number programmed in this location is sent as the tens digit The ones digit is automatically the man number When using the remote arming input the man number is 1 When using a one button Quick Arm code the man number is 1 LOCATION 255 PROGRAMMING THE CROSS ZONE TIME Location 255 contains the number of minutes 1 to 15 in which a second trip must occur in a cross zone before an alarm is created Care must be taken when activating this feature that two or more cross zones are set up that will be tripped within this time frame in the event of a burglary This feature should only be used on interior zones Never activate cross zoning on a perimeter zone 27 REMAINING LOCATIONS ARE ACCESSIBLE ONLY THROUGH DOWNLOADING LOCATIONS 256 263 CONTROL PANEL ACCESS CODE Locations 256 263 contain the eight digit access code the 8980E must receive from the downloading software before the panel w
19. q v 3 Z SINALNO OV OV ars JN SOd 3N SOd SAd l 2 L 9 S p 35 a is ANI 3 3 1 AHL LOANNOOSIC SAVMTIV MOOHS Ol lIO413 3 ASIA Cd ld d4OV datl 3015 40 JHL ISNIVOV NOIIO3IO Id TERMINAL DESCRIPTION TERMINAL DESCRIPTION 1 4 Programmable Auxiliary Output Terminals Connect one side of zone 1 loop The other side of loop to common terminal 6 Open or short causes alarm Common Terminal Connect one side of zone 2 loop The other side of loop to common terminal 6 Open or short causes alarm See Terminal Drawing and repeat the above sequence for zones 3 8 17 18 19 20 Connect keypad wires as follows yellow to terminal 17 green to terminal 18 black to terminal 19 red to terminal 20 200 ft maximum run with 22 gauge wire 500 ft maximum run with 18 gauge wire Home run cable to each keypad Siren driver output to speaker s Speaker rating should be 15 watt at 8 or 16 ohm or 30 40 watt at 4 8 or 16 ohms If siren driver disable is selected in location 132 output becomes voltage output 12VDC 1 Amp maximum load Smoke detector power 12VDC 100 mA maximum For those jurisdictions which allow the Priority zone to be used with smoke detectors T Telephone Tip green R Telephone Ring red R1 House Telephone Ring
20. through the keypad sounder This lowest level of security can be enabled by zone on page 23 in locations 186 193 FORCE ARMING When enabled in location 197 the Ranger 8980E can be armed with zones violated lacking a green Ready light on the keypad Under this condition all zones that are not secure at the end of the exit delay will become bypassed All zones that become secured before the end of the exit delay will become active in the system AUTOMATIC ARMING The Ranger 8980E can be programmed to Automatically Arm at a predesignated time of day if it has not already been armed See location 202 page 24 DUAL SPLIT REPORTING The Ranger 8980E can be programmed for dual and or split reporting AUTOMATIC BYPASS INSTANT ARMING When enabled the control panel can automatically bypass interior follower zones if an exit is not detected during the delay time and delayed zones can be made instant See location 131 on page 16 of this manual for the different combinations of programming this feature DYNAMIC BATTERY TEST When enabled in location 203 the Ranger 8980E can be programmed to perform a dynamic battery test for a selected duration at 6 00 AM FIRE ALARM VERIFICATION When enabled in location 143 the Ranger 8980E has the ability to verify a Fire alarm by requiring more than one trip on a smoke detector before creating an alarm ALARM HISTORY Five seconds after pressing the 0 key the keypad will annunciate Freeze Fra
21. will be reported if bypass reporting is enabled in location 125 NOTE THIS FEATURE CANNOT BE ENABLED FOR INSTALLATIONS 14 LOCATION 131 AUTOMATIC BYPASS INSTANT ARMING Location 131 is used to enable automatic Instant Arming Programming a 1 in this location will cause the control to automatically enter the Instant mode and bypass interior follower zones if a fault is not detected on an entry exit zone during the exit delay Programming a 3 in this location Automatic Bypass will cause the interior follower zones to become bypassed if a fault is not detected on an entry exit zone yet will not change the status of the entry exit zone Programming a 4 in this location will enable Entry Guard see page 27 for a complete description If this location contains 0 these features are disabled Pressing the key when the system is armed will cause the Instant light to toggle When the Instant light is on the entry exit zone is instant when off the entry exit zone is delayed The key will toggle the Instant mode regardless of the programming data in this location See location 141 Special Keypad Functions to further enhance these features LOCATION 132 SIREN DRIVER OR VOLTAGE OUTPUT LAST CHANCE TO EXIT WARNING The built in siren driver has a steady sound for Priority zone type and a yelp sound for Burglary and Panic Factory default is 0 enabling this feature If the built in siren driver is NOT t
22. 1800HZ TRANSMIT 2300HZ HANDSHAKE SINGLE WITH PARITY ROUND W PARITY 40 PPS EXTENDED HEX CAPABILITY EXTENDED RADIONICS FAST 1800HZ TRANSMIT 1400HZ HANDSHAKE SINGLE WITH PARITY ROUND W PARITY 40 PPS EXTENDED HEX CAPABILITY ADEMCO 4 2 EXPRESS DTMF C 12 SILENT KNIGHT 4 2 1900HZ TRANSMIT 1400 HANDSHAKE DOUBLE ROUND 20PPS D 13 ADEMCO CONTACT ID DTMF SEE APPENDIX 2 E sia SK 1 15 PAGER CUSTOM FORMAT SEE OVER RIDE LOCATIONS 182 183 208 209 LOCATIONS 000 003 PROGRAMMING THE MASTER ARM DISARM CODE Locations 000 003 contain master arm disarm code user number 1 Location 000 contains the first digit of the code location 003 contains the fourth digit of the code THE CODE MUST CONTAIN FOUR 4 DIGITS The master code can then be used in the run mode to enter arm disarm codes 1 7 The factory default code is 1 2 3 4 NOTE User codes 8 thru 14 can only be accessed from the installers programming level in locations 212 239 LOCATIONS 004 023 PROGRAMMING THE ARM DISARM CODE FOR USERS 2 THRU 6 Locations 004 023 contain the arm disarm codes for user numbers 2 thru 6 Location 004 contains the first digit of the code 2 and location 007 contains the fourth digit of code 2 THESE CODES MUST CONTAIN FOUR 4 DIGITS To disable a code PROGRAM a 15 as the first digit of the code These codes can be changed in the RUN mode using the master code User codes 8 thru 14 locations 212 239
23. 3 YO 2 1334 002 ZZ 21 00 02 X 001 034 NAY 3 Z AVIRI NOIuzans A DA SHON ZL aalsn TN au SHOAZL HOH SAYAY 3 3 MONS V Ad SI yguigob yaad MONS WYU Od IWHL 4 V H tz 1 p 19F Ol IO3NNOO LON Od aav NHM 7134 3OOTJ3HA sau 99 sau 938 93 930 sau sau 00 13 ISN SZOL GALINA ISN 9 S96 T 303 N3HM dN 02 WAL AA SANY Z IV WOY INSU 9575 UND TVLOL ade 3 ONY KINO 3SN SWAISAS G3ISH ssvio Z4 A9 ANY IV aasnd CE LOOT Ota TSN Wag SI 138 41 SWHO 006 JONVISISIY WNINIXW 2 8 YAMOd 40103130 DONS 01 YOR P 5 L 507 GL 303 z 5 NMOHS YOLSISR 103 XW 009 UARA NINIS NI 5 2 INN 40 3 3 ISMN 53 TIY L OSs 94 SHOA ZL 5 ON oft YAMOd AUWTIXNY INIYON od SI INdIN N3HM 92 ANY AAILISOd SI IndInO NIHM 400 096 OL CALI SLNAINO AOZ 9 91 UM IAd3NOAS Tlag 3dS
24. 4 coNTROLPANELSHUTDOWN or controton 32 APPENDIX 1 REPORTING IN SIA FORMAT The 8980E has the ability to report SIA level 1 transmissions to either or both phone numbers Each report in SIA consists of an Event Code and a Zone or User ID The Zone or User ID is programmed in the first digit of each report When programming the event code the second digit for zones 1 8 locations 105 107 109 111 113 115 117 or 119 programming a zero will cause the event code to follow the zone type for that zone The event code for the zone type can be overridden by programming a digit from the table below Duress location 87 AUX 1 location 89 AUX 2 location 91 and keypad Panic location 93 must be programmed from the table below Programmed Event Code SIA Code Description 1 FA Fire Alarm 2 PA Panic alarm 3 BA Burglary Alarm 4 GA Gas Alarm 5 KA Heat Alarm 6 WA Water Alarm 7 QA Emergency Alarm 8 SA Sprinkler Alarm 9 Untyped Alarm 10 HA Holdup Alarm 11 MA Medical Alarm 12 ZA Freeze Alarm 13 TA Tamper Alarm 14 RP Periodic Test 15 YF System Fault If Zone ID 0 15 ET Expander Module Trouble If Zone ID 1 15 ET RF Loss of Supervision If Zone ID 2 15 TA Sensor Tamper If Zone ID 3 15 XT Sensor Low Battery If Zone ID 4 The following reports will send fixed event codes regardless of the number programmed in the event code location Event SIA Code Event Code Location Keypad Tamper TA 95 Download Complete RS 97
25. CLOCK CURRENT YEAR ONES DIGIT 1994 UNDEFINED 156 18 PROGRAM CLOCK CURRENT DAY OF MONTH TENS DIGIT UNDEFINED 157 18 PROGRAM CLOCK CURRENT DAY OF MONTH ONES DIGIT UNDEFINED 158 18 PROGRAM CLOCK CURRENT HOUR TENS DIGIT UUNDEEFINED 159 18 PROGRAM CLOCK CURRENT HOUR ONES DIGT UNDEFINED 160 19 PROGRAM CLOCK CURRENT MINUTE TENS DIGIT UNDEFINED 161 19 PROGRAMCLOCK CURRENTMINUTE ONESDIGIT UNDEEFINED 65 19 PROGRAMAUTOTESTTIME HOUR TeNsDIIT th 163 19 PROGRAMAUTOTESTTIME HOUR ONESDIGIT 164 19 PROGRAMAUTOTESTTIME MINUTE TENSDIGIT 16 19 PROGRAMAUTOTESTTIME MINUTE ONesDIGT __ de 166 19 PROGRAMAUTOTESTTIMEREPORTINGINTERVALS MON 167 19 ROTATING MAINTENANCE CODES ENABLE sap 168 20 ROTATING MAINTENANCE CODES SEEDCObEDIGIT 169 20 ROTATING MAINTENANCE CODES SEED CODE DIGIT 2 0 170 20 ROTATING MAINTENANCE CODES SEED CODE DIGITS m 20 ROTATING MAINTENANCE CODES SEED coDE DIGITA j USER 7 MAINTENANCE CODE OPENING REPORT o DISABLED USER 7 MAINTENANCE CODE CLOSING REPORT o DISABLED 174 PROGRAM ZONES 3 THRU 6 FOR NORMALLY CLOSED OPERATION 0 SUPERVISED 21 PROGRAM ZONES 1 2 7 amp 8 FOR NORMALLY CLOSED OPERATION 0 SUPERVISED 175 SPLIT REPORT TAMPER DOWNLOAD COMPLETE amp AUTOTEST PHONE 1 A 22 SPUIT REPORT AC FAILURE LOW BAT
26. MENSIONS 5 50 Wide 4 25 High 850 Deep METAL ENCLOSURE 11 25 Wide 11 25 High 3 50 Deep SHIPPING WEIGHT 9 Ibs FIVE YEAR LIMITED WARRANTY CADDX CONTROLS INC GUARANTEES THIS PRODUCT AGAINST DEFECTIVE PARTS AND WORKMANSHIP FOR TWENTY FOUR 24 MONTHS FROM DATE OF MANUFACTURING IF ANY DEFECT APPEARS DURING THE WARRANTY PERIOD RETURN IT TO CADDX POSTAGE PREPAID THE UNIT WILL BE REPAIRED AND RETURNED FOR THE REMAINING 36 MONTHS OF WARRANTY THE UNIT WILL BE REPAIRED FOR A FEE NOT TO EXCEED 10 00 PLUS SHIPPING AND HANDLING CADDX ASSUMES NO LIABILITY FOR CONSEQUENTIAL OR INDIRECT DAMAGE AND ACCEPTS NO RESPONSIBILITY FOR REPAIRING DAMAGE TO THE PRODUCT CAUSED BY MISUSE CARELESS HANDLING OR WHERE REPAIRS HAVE BEEN MADE BY OTHERS NO OTHER GUARANTEE WRITTEN OR VERBAL IS AUTHORIZED BY OR ON BEHALF OF CADDX CONTROLS INC GLADEWATER TEXAS CADDX CONTROLS INC 1420 NORTH MAIN STREET GLADEWATER TEXAS 75647 TOLL FREE 800 727 2339 FAX 903 845 6811 8980E INSTALLATION MANUAL 8980EIJ97 REV J 01 08 98
27. PHONE NUMBERS DATA FOR LOCATION 205 MAINT CODE OPEN CLOSE eS OPENCLOSE 1 a LOW BATTERY LOW BATTERY MAINT CODE OPEN CLOSE s ee C AC FAIL MAINT CODE OPEN CLOSE __ _ __ JAC FAIL LOW BATTERY MAINT CODE OPEN CLOSE a AC FAIL LOW BATTERY OPEN CLOSE MAINT CODE OPEN CLOSE LOCATION 206 ALL REPORTS TO BOTH THE PRIMARY AND SECONDARY PHONE NUMBERS Programming a 1 in location 206 will cause the 8980E to send all reports to both the primary and secondary telephone numbers LOCATION 207 CALLBACK PHONE NUMBER CONTROL The number programmed in location 207 controls the use of the callback telephone number The callback number must be programmed in the download section for this location to have an effect The callback number will be used according to the following binary scale DESCRIPTION Add if a callback should not occur before a download session Add if 8 sight initiated download is enabled Add if callback at autotest intervals is enabled Add for automatic callback when event log is full 25 LOCATION 208 FORMAT OVER RIDE LOCATION The number programmed in this location will select the available format options NOTE You must use DTMF transmission for the Pager format to function see location 209 below VALUE DESCRIPTION Add for Pager format 2 Add for Ademco Handshake Add for Caddx modem
28. R CODE FOR ZONE 6 Locations 114 115 contain the communicator code to be reported each time zone 6 creates an alarm Location 114 contains the standard digit and location 115 contains the extended digit When using 4 2 format the number programmed in location 114 is sent as the ones digit The tens digit is programmed in location 115 LOCATION 116 117 PROGRAMMING THE COMMUNICATOR CODE FOR ZONE 7 Locations 116 117 contain the communicator code to be reported each time zone 7 creates an alarm Location 116 contains the standard digit and location 117 contains the extended digit When using 4 2 format the number programmed in location 116 is sent as the ones digit The tens digit is programmed in location 117 LOCATION 118 119 PROGRAMMING THE COMMUNICATOR CODE FOR ZONE 8 Locations 118 119 contain the communicator code to be reported each time zone 8 creates an alarm Location 118 contains the standard digit and location 119 contains the extended digit When using 4 2 format the number programmed in location 118 is sent as the ones digit The tens digit is programmed in location 119 LOCATION 120 121 PROGRAMMING TO REPORT AC POWER LOSS The Ranger 8980E has the ability to report an AC power failure code when AC power is lost This report can be immediate or delayed depending on the information programmed in location 150 AC POWER LOSS DELAY The desired AC failure mode should be programmed in locations 120 121 If both locations are
29. R FACILITIES The telephone company may make changes in its communications facilities equipment operations or procedures where such action is reasonably required and proper in its business Should any such change render the customers terminal equipment incompatible with the telephone company facilities the customer shall be given adequate notice to make modifications to maintain uninterrupted service GENERAL The FCC prohibits customer provided terminal equipment be connected to party lines IMPORTANCE OF THE RINGER EQUIVALENCE NUMBER The Ringer Equivalence Number of this device is 0 0 B This number is a representation of the electrical load that it applies to your telephone line MALFUNCTION OF THE EQUIPMENT In the event that the device should fail to operate properly the customer shall disconnect the equipment from the telephone line to determine if it is the customers equipment that is not functioning properly If the problem is with the device the customer shall discontinue use until it is repaired EQUIPMENT INFORMATION MANUFACTURER OF CONNECTING EQUIPMENT CADDX CONTROLS INC FCC REGISTRATION NUMBER GCQ4DC 17266 AL E RINGER EQUIVALENCE 0 0 B 36 SPECIFICATIONS OPERATING POWER 16 5 VAC 25 VA Transformer AUXILIARY POWER 12 VDC 500mA 400mA for U L LOOP RESISTANCE 300 Ohms Maximum BUILT IN SIREN DRIVER 2 tone Steady and Yelp LOOP RESPONSE Selectable to 500mS OPERATING TEMPERATURE 32 to 120 degrees F KEYPAD DI
30. RANGER 8980E DOWNLOADABLE CONTROL COMMUNICATOR INSTALLATION MANUAL TABLE OF CONTENTS GENERAL DESCRIPTION STANDARD AND OPTIONAL PARTS LIST FEATURE DEFINITIONS TERMINAL DRAWING AND SPECIAL NOTES TERMINAL amp FUSE DESCRIPTION HOW TO PROGRAM THE RANGER 8980E KEYPAD PROGRAMMING EXAMPLES PROGRAMMING PHONE NUMBERS amp FORMATS COMMUNICATOR FORMAT SELECTION GUIDE OPTIONAL PROGRAMMING INSTRUCTIONS DOWNLOAD PROGRAMMING INSTRUCTIONS ADDITIONAL COMMENTS ABOUT THE 8980E PROGRAMMING WORKSHEETS APPENDIX 1 REPORTING SIA FORMAT APPENDIX 2 REPORTING CONTACT ID UNDERWRITERS LABORATORIES REQUIREMENTS LOCAL TELEPHONE COMPANY INTERFACE INFO SPECIFICATIONS amp WARRANTY CADDX CONTROLS INC GLADEWATER TEXAS 800 727 2339 RANGER 8980E INSTALLATION MANUAL General Description The Caddx Ranger 8980E is a versatile 8 zone up downloadable security control with a built in digital communicator Its microcomputer design gives some of the most versatile yet easy to use features available for most security applications today Each of the eight zones can be programmed to be one of ten different types including 24 Hour Interior Follower and Day zone Each zone is individually annunciated and can be bypassed from the keypad See page for a description of all zone types Read the User s Manual before you begin the installation for the best overall description of how the Ranger 8980E functions After installation of the security system comple
31. ST REPORTS The Ranger 8980E has the ability to send autotest reports at intervals from 1 to 15 days Locations 098 099 contain the communicator codes sent for autotest Location 098 contains the standard communicator code and location 099 contains the extended communicator code When using a 4 2 format the number programmed in location 098 is sent as the ones digit The number programmed in location 099 is sent as the tens digit When using an extended format the extended report will be sent if location 099 contains a number other than If locations 098 099 are 0 autotest is disabled NOTE WHEN USING AUTOTEST LOCATIONS 152 166 MUST BE PROGRAMMED LOCATION 100 101 PROGRAMMING TO REPORT FAILURE TO COMMUNICATE The 8980E has the ability to communicate each time communication is re established after a signal has been unable to report The data that failed to communicate will not be sent but can be recovered from the log The desired Failure To Communicate code is programmed in locations 100 101 If both locations are Failure To Communicate will not be reported Location 100 contains the standard digit and location 101 contains the extended digit When using 4 2 format the number programmed in location 100 is sent as the ones digit The tens digit is programmed in location 101 LOCATION 102 PROGRAMMING TO REPORT CLOSINGS The Ranger 8980E has the ability to report a closing code each time the control is armed The des
32. TELEPHONE NUMBER Location 074 contains the communicator format for the secondary phone number Consult the instructions for your central station receiver to determine which format is compatible To select Ademco Silent Knight Fast program 2 in this location Radionics 1800HZ 2300HZ Fast with Parity and Hex Capability requires 9 in this location For a Pager format program a 15 in this location along with the appropriate data in locations 208 and 209 If you need another format choose from those listed in the format table below and program the appropriate data in this location If location 074 is 0 the format programmed in location 052 will be used DATA FORMAT DESCRIPTION o LOCAL ONLY THE COMMUNICATOR IS DISABLED UNIVERSAL 4 2 1800HZ TRANSMIT 2300HZ HANDSHAKE DOUBLE ROUND PARITY 40 PPS ADEMCO SILENT KNIGHT FAST 1900HZ TRANSMIT 1400HZ HANDSHAKE DOUBLE ROUND PARITY 20 PPS CADDX MODEM PROPRIETARY SESCOA SUPERFAST 1800HZ TRANSMIT 2300HZ 4 2 EXTENDED RADIONICS SLOW 1800HZ TRANSMIT 2300HZ HANDSHAKE DOUBLE ROUND PARITY 20 PPS EXTENDED HEX CAPABILITY EXTENDED RADIONICS SLOW 1800HZ TRANSMIT 1400HZ HANDSHAKE DOUBLE ROUND PARITY 20 PPS EXTENDED HEX CAPABILITY EXTENDED RADIONICS FAST 1800HZ TRANSMIT 2300HZ HANDSHAKE DOUBLE ROUND PARITY 40 PPS EXTENDED HEX CAPABILITY EXTENDED RADIONICS FAST 1800HZ TRANSMIT 1400HZ HANDSHAKE DOUBLE ROUND PARITY 40 PPS EXTENDED HEX CAPABILITY EXTENDED RADIONICS FAST
33. ain reports to both the primary and secondary phone numbers When using dual reporting the primary phone number always takes priority over the secondary number There are 7 reports that can be individually programmed to report to both phone numbers Location 204 is used to force up to three of these individual reports to both numbers To program tamper download complete or autotest to report to both numbers use the following chart and program the appropriate data in location 204 REPORT TO BOTH PHONE NUMBERS DATA TO PROGRAM IN LOCATION 204 TAMPER AUTOTEST DOWNLOAD COMPLETE DOWNLOAD COMPLETE AUTOTEST TAMPER AUTOTEST TAMPER DOWNLOAD COMPLETE 12 TAMPER COMPLETE AUTOTEST EQN f f 24 LOCATION 205 DUAL REPORTING PROGRAMMING AC POWER FAIL LOW BATTERY OPEN CLOSE AND MAINTENANCE OPEN CLOSE TO REPORT TO THE PRIMARY AND SECONDARY PHONE NUMBERS The 8980E is capable of sending certain reports to both the primary and secondary phone numbers When using dual reporting the primary number always takes priority over the secondary number There are 7 reports that can be programmed to report to both numbers Location 205 is used to force up to four of these individual reports to both phone numbers To program AC power fail low battery open close or maintenance code open close to report to both numbers use the following chart and program the appropriate data in this location REPORTS TO SEND TO BOTH
34. ault is 30 seconds LOCATION 076 PROGRAMMING THE EXIT DELAY TIME Location 076 contains the number of 10 second increments in the exit delay The exit delay can be programmed in 10 second increments from 10 to 150 seconds 1 10 seconds through 15 150 seconds For example programming 2 in this location will produce an exit delay of 20 seconds Note A 0 entry is treated as 0 seconds Programming a 6 in this location will produce an exit delay of 60 seconds Factory default is 60 seconds LOCATION 077 PROGRAMMING THE SIREN SHUTDOWN RECYCLE TIMEOUT Location 077 contains the number of 2 minute increments in the automatic cutoff time The automatic cutoff time can be programmed in 2 minute increments from 2 to 30 minutes 1 2 min thru 15 30 min For example programming a 2 in this location will produce an automatic cutoff time of 4 minutes Programming a 6 in this location will produce an automatic cutoff time of 12 minutes LOCATIONS 078 085 PROGRAMMING THE ZONE TYPES Locations 078 through 085 contain a number identifying the characteristics of each of the 8 zones Location 078 corresponds to zone 1 and location 085 corresponds to zone 8 Each zone will factory default according to the programming worksheet To program zone characteristics other than the default values program a number from 1 to 10 based on the zone types available the chart on the following page 10 DATA Foss AVAILABLE ZONE TYPES
35. c Zone Must be normally open momentary panic switch LOCATION 142 SIREN BELL TEST FEATURE The siren bell can be programmed to activate upon different conditions Using the chart below add the values of the desired condition s and program the sum of those values in location 142 When the siren bell is activated by pressing the 1 and 7 keys simultaneously the communicator will not report a message and the siren bell can be silenced by entering an arm disarm code VALUE DESCRIPTION Activation by pressing 1 and 7 keys simultaneously Momentary activation at arming Momentary at end of exit delay Momentary at kiss off ringback LOCATION 143 SMOKE POWER RESET AND OR FIRE ALARM VERIFICATION Programming a 1 in location 143 will cause the 8980E when in the disarmed state to interrupt the smoke detector power each time the 4 button is pressed If this location contains 0 the smoke detector power will reset only after the button is pressed when the corresponding LED s for zones designated as Priority are on steady for alarm or blinking for trouble Programming a 2 in this location will enable the Fire Alarm Verification feature When the Fire Alarm Verification feature is enabled a smoke detector will be powered down and reset automatically after the first trip waiting for a second trip within a 2 minute time frame thus verifying a fire alarm condition before creating an alarm and communicating a messag
36. communicate to the central station when the 8980E is armed disarmed and give LED indication of the zone s faulted NOTE WHEN PROGRAMMING THE FOLLOWING COMMUNICATOR CODES A 10 MUST BE PROGRAMMED IN ORDER TO REPORT A ZERO 0 LOCATION 086 087 PROGRAMMING THE RANGER 8980E FOR DURESS CODE CAPABILITY The Ranger 8980E has the ability to report a duress code when the system is armed or disarmed with user code number 7 and a duress communicator code is programmed in locations 086 087 If both locations are 0 the duress capability is disabled and user code number 7 can only be used as a standard arm disarm code Location 086 contains the standard digit and location 087 contains the extended digit When using 4 2 format the number programmed in location 086 is sent as the ones digit The tens digit is programmed in location 087 NOTE ENABLING THE MAINTENANCE CODE FEATURE IN LOCATION 167 WILL AUTOMATICALLY DISABLE THE DURESS FEATURE LOCATION 088 089 PROGRAMMING FOR AUXILIARY 1 1 amp 3 DOUBLE KEYPRESS The Ranger 8980E has the ability to report an Auxiliary 1 code and activate the Priority siren each time the 1 and 3 keys are pressed simultaneously on the keypad The desired reporting code is programmed in locations 088 089 If both locations are 0 the Auxiliary 1 double keypress is disabled Location 088 contains the standard digit and location 089 contains the extended digit When using a 4 2 format the number programmed
37. ctivated the siren can be silenced by entering any Arm Disarm code LOCATION 094 095 PROGRAMMING THE TAMPER FEATURE The Ranger 8980E has an optional tamper feature that when enabled will lock out the keypads for 1 minute if 30 random keypresses are made without producing a valid code The desired tamper code should be programmed in locations 094 095 If the control is not programmed for local only the tamper will be communicated If both locations are 0 the tamper feature will not be enabled or reported Location 094 contains the standard digit and location 095 contains the extended digit When using 4 2 format the number programmed in location 094 is sent as the ones digit The tens digit is programmed in location 095 LOCATION 096 097 PROGRAMMING TO REPORT DOWNLOADING COMPLETE Locations 096 097 contain the communicator report sent each time a download session has been completed The report will come in after a disconnect has been made from a downloading session Location 096 contains the standard communicator code and location 097 contains the extended communicator code When using a 4 2 format the number programmed in location 096 is sent as the ones digit The number programmed in location 097 is sent as the tens digit When using an extended format the extended report will be sent if location 097 contains a number other than 0 If locations 096 097 are 0 this report is disabled LOCATION 098 099 PROGRAMMING FOR AUTOTE
38. d3N HLM JONVQYOOOY NI G3TIVISNI 38 SI ININAINOA UAENNN 3 3 3 JONOd V 38 LON TIVHS TYNOIS WAVY 8 JHL 1 170071 JHL 3 HUM AINO 38 TIVHS NOIIVIS TWULNIO YO SUFLUYNSAVSH Wavy 3 4 V Ol TYNOIS WAVY 3114 JHL NOISSINSNYYL INO HIM ONIGYOINMOd NAHM 6 3 38 ISA YOLINOW SNOHd 31 INOHd YOLNOW JOVO 6 8 54 d AINO 19 3 ddd AVOLOVA 3503 dO ANY 34 1 SINS NO1 01 9 QOU TWIN NING 0868 WO NuaTINa GalWOICAG V UO NNOO OS SuOlveadO q USIWM GIRIJA V 38 p 3 ANY 30868 1 NLITNA SIOVINOD z ANNOYS FHL a 09 NOLVTIVISNI 9001 3443 SOYADA JHL 18438 SNOLONRISNI ON ad 9 YOH GSGNNOYS HLAVA dAV LON LSM NV NOLWNYOINI amp 38 ISN T3NVd JHL NN FAIM 13 3AVH ISN HOV3 SNINIH II LON Od vi Bk N qNnozo 9 344 1333 009 3AM 3 nV 9 a 1N3IVAn
39. e LOCATION 144 EUROPEAN PULSE DIAL RATIO Programming a 1 in location 144 will change the pulse dialing make break ratio and interdigit spacing to conform to most European telecom standards LOCATION 145 148 PROGRAMMING THE AUXILIARY OUTPUTS 16 Four of the functions in the following table are available on terminals 1 thru 4 These outputs are often used to switch small relays LED s trip long range radio or to add a remote sensor For example to create an LED that lights for alarm memory program an 11 into location 145 Wire the positive lead of the LED to terminal 26 positive aux power and the negative lead through a limiting resistor of approximately 650 ohms to terminal 1 aux output 1 If the LED operation is ON when you wantit to be OFF see location 149 NOTE NO MORE THAN 20 MILLIAMPS CAN BE SUPPLIED FROM THESE TERMINALS 250 MICROAMPS IF POSITIVE ACTIVATION ON NOTES 0 BURGLARY ALARM MOMENTARY OUTPUT FIRE ALARM MOMENTARY OUTPUT 2 PANIC ALARM DURESS MOMENTARY OUTPUT 3 _ ARMED STATE a ARMED WITH BYPASS 5 AC POWER e LOW BATTERY LISTEN IN 8 TAMPER ALARM o 10o PHONE FAULT n ALARM MEMORY 12 ENTRY KEYPAD SOUNDER mar ExiT 14 STATUS LED 5 GROUND START MOMENTARY OUTPUT The Fire Panic Burglary options for the auxiliary outputs can be programmed for momentary or to follow the siren Pro
40. e PRIMARY phone number is dialed is programmed in locations 048 051 Any zero 0 within the account code must be programmed as a 10 and the communicator will report a zero 0 If the account code is three digits long use locations 048 049 and 050 and program 0 in location 051 to indicate the end of the account code LOCATION 052 PROGRAMMING COMMUNICATOR FORMAT FOR THE PRIMARY PHONE NUMBER Location 052 contains the communicator format used to transmit to the receiver connected to the primary phone number Consult the instructions for your central station receiver to determine which format is compatible To select Ademco Silent Knight Fast program 2 in location 052 Radionics 1800HZ 2300HZ Fast w Parity and Hex Capability requires a 9 in this location For a Pager format program a 15 in this location along with the appropriate data in locations 208 and 209 If you need another format choose from those listed in the format table located on the following page and program the data in location 052 If this location contains a 0 the built in communicator will be disabled and the Ranger 8980E will function as a local only control LOCATION 053 DISABLING THE SECONDARY TELEPHONE NUMBER AS A BACKUP Location 053 is used to disable the secondary phone number as a backup This feature can be used with split reporting locations 176 177 to prevent a report from going to the secondary telephone number after unsuccessful attempts to t
41. e current time is 5 25 PM the 24 hour time is 17 25 so this location should contain a 7 which is the current hour ones digit If the current time is 9 36 AM the 24 hour time is 09 36 and this location should contain 9 18 LOCATION 160 PROGRAMMING CLOCK CURRENT MINUTES TENS DIGIT Location 160 contains the current minutes tens digit The time is entered in 24 hour time If the current time is 5 25 PM the 24 hour time is 17 25 so location 160 should contain a 2 which is the current minutes tens digit If the current time is 9 36 AM the 24 hour time is 09 36 and this location should contain a 3 LOCATION 161 PROGRAMMING THE CLOCK CURRENT MINUTES ONES DIGIT Location 161 contains the current minutes ones digit The time is entered in 24 hour time If the current time is 5 25 PM the 24 hour time is 17 25 so this location should contain a 5 which is the current minutes ones digit If the current time is 9 36 AM the 24 hour time is 09 36 and this location should contain a 6 LOCATION 162 PROGRAMMING THE AUTOTEST TIME HOUR TENS DIGIT Location 162 contains the tens digit of the hour that the autotest report is initiated The time is entered in 24 hour time If the desired autotest time is 5 25 PM the 24 hour time is 17 25 so this location should contain a 1 which is the tens digit of the desired hour for autotest If the desired autotest time is 9 36 AM the 24 hour time is 09 36 and
42. ectors in living rooms dining rooms bedrooms kitchens hallways attics furnace rooms closets utility and storage rooms basements and attached garages 35 LOCAL TELEPHONE COMPANY INTERFACE INFORMATION TELEPHONE CONNECTION REQUIREMENTS Except for telephone company provided ringers all connections to the telephone network shall be made through standard plugs and standard telephone company provided jacks or equivalent in such a manner as to allow for immediate disconnection of the terminal equipment Standard jacks shall be so arranged that if the plug connected thereto is withdrawn no interference to the operation of the equipment at the customers premises which remains connected to the telephone network shall occur by reason of such withdrawal INCIDENCE OF HARM Should terminal equipment or protective circuitry cause harm to the telephone network the telephone company shall where practical notify the customer that temporary discontinuance of service may be required however where prior notice is not practical the telephone company may temporarily discontinue service if such action is deemed reasonable in the circumstances In the case of such temporary discontinuance the telephone company shall promptly notify the customer who will be given the opportunity to correct the situation The customer also has the right to bring a complaint to the FCC if he feels the disconnection is not warranted CHANGES IN TELEPHONE COMPANY EQUIPMENT O
43. ed or disarmed without AC power 15 LOCATION 139 PROGRAMMING THE QUICK ARM DIGIT Location 139 contains the Quick Arm digit To enable program a digit 1 9 in this location If the Quick Arm digit is the same as the first digit of the Master code user 1 the Chime feature will not function The Quick Arm digit cannot be the same as the first digit of the Go To Program code Default is 0 disabled LOCATION 140 PRIORITY SIREN CUTOFF INHIBIT Ifa 1 is programmed in location 140 a Priority zone type siren will sound continuously until an arm disarm code is entered If this location contains a the Priority zone type siren will shutdown after the amount of time programmed in location 077 has elapsed Programming in this location does not affect the burglary siren LOCATION 141 SPECIAL KEYPAD COMMAND FUNCTIONS When the system is armed and this location is programmed with something other than a 0 pressing the first digit of the Master code followed immediately by the key can create one or more of the changes described below Select the desired features from the table below add their values and program the sum in location 141 VALUE DESCRIPTION Restart The Exit Delay Make Interior Delay Zones Bypass amp Unbypass Like Interior Follower Zones During Automatic Bypass Instant Arming Conditions location 131 Unbypass All Bypassed Interior Zones Convert Remote Arming Pins On PCB To A Remote Keypad Pani
44. ephone number always takes priority over the secondary number The 8980E always sends zone and alarm reports to the primary number There are 7 reports that can be programmed to report to the second telephone number Location 177 is used to force up to four of these individual reports to the second number To program AC power fail low battery open close or maintenance code open close to report to the secondary number use the following chart and program the appropriate data in this location REPORTS TO SEND TO SECONDARY NUMBER DATA FOR LOCATION 177 MAINT CODE OPEN CLOSE 1 OPEN CLOSE OPENCLOSE mant CODE LOWBATTERY MANT CODE LOW BATTERY OPEN CLOSE AC FAIL LOW BATTERY OPEN CLOSE FAIL LOW BATTERY OPEN CLOSE MAINT CODE OPEN CLOSE F 5 LOCATION 178 PROGRAMMING THE SECONDARY ENTRY DELAY ZONE TYPE 9 Location 178 contains the number of 10 second increments in the secondary entry delay This delay can be programmed from 10 to 150 seconds 1 10 sec thru 15 150 sec NOTE ACCORDING SEC 26 OF ULL 1023 THE SECONDARY ENTRY TIME SHALL NOT EXCEED 45 SECONDS LOCATION 179 PROGRAMMING THE SECONDARY EXIT DELAY ZONE TYPE 9 Location 179 contains the number of 10 second increments after arming before trips will be recognized on a zone type 9 The exit delay can be programmed in 10 second increments from 10 to 150 seconds 1 10 seconds thru 15 150 seconds
45. er is 9 LOCATIONS 212 239 PROGRAMMING THE ARM DISARM CODES FOR USERS 8 14 Locations 212 239 contain the arm disarm codes for user numbers 8 14 These codes can be accessed only in the program mode or through downloading LOCATION 240 ENTERING THE NUMBER OF DIAL ATTEMPTS TO SECONDARY PHONE NUMBER Location 240 is used to enter the number of dial attempts 1 to 15 attempts the communicator will try to the second phone number before ending the notification process If this location contains an 8 the communicator will make 8 attempts to the second number if a second number is programmed If this location contains a 0 the number programmed in location 134 will be used LOCATION 241 LISTEN IN TIME Location 241 is used to program Listen In time in 30 second increments Valid entries are 1 3 1 30 3 90 LOCATION 242 RESERVED LOCATION 243 ENTRY KEYPAD SOUNDER In Location 243 program an 8 to make a DATA entry of 12 in location 145 148 become an ENTRY SOUNDER LOCATIONS 244 251 ASSIGNING SPECIAL CHARACTERISTICS FOR ZONES 1 8 26 Locations 244 251 are used to assign individual characteristics for each of zones 1 8 These locations can be used to enable or disable the Trouble Reporting Group Bypass Entry Guard and Cross Zone feature for each of the individual zones 1 8 To enable these features enter a binary number according to the following chart VALUE DESCRIPTION Cross Zone 1 2 Entry Guard Zone 4 Gro
46. es digit is the man number of the person that canceled When using a remote arming input the man number is 1 LOCATION 128 PROGRAMMING THE COMMUNICATOR TO ABORT Location 128 is used to enable the communicator abort The number programmed in this location will be the number of two second increments the 8980E will delay before attempting to communicate an alarm on 24 hour zone If this location contains a 0 the Ranger 8980E will not abort any reports LOCATION 129 PROGRAMMING FOR SILENT PANIC HOLD UP Location 129 is used to silence the audible output for a panic hold up alarm Programming a 1 in this location will silence the audible output during a panic hold up alarm If this location contains a 0 the Ranger 8980E will have an audible panic hold up output Program a 2 to silence Keypad Sounder during alarm LOCATION 130 ENABLING THE SWINGER SHUTDOWN Location 130 is used to enable the burglary zone swinger shutdown The number programmed in this location will determine the number of trips the Ranger 8980E will allow before bypassing all burglary zones 1 8 which have tripped during an arming cycle The bypassed zones will not report trips to a central station and the local siren or bell will not sound for these zones A zone trip will not be added to the number count until after the zone has tripped more than once If this location contains a 0 this feature is disabled A zone which has been bypassed by this feature
47. essing location number followed by the Key 8950 PROGRAMER FIGURE 3 Current Location Indicator 1 Thru Data Keys LOCATION rome Mall Mee fe I Iti _ 4 5 6 DATA 1 Location Advance Key Current Data Indicator Data Enter Change Key PAGES 8 amp 9 DESCRIBE ALL LOCATIONS WHICH MUST BE PROGRAMMED FOR RANGER 8980E TO FUNCTION AND REPORT TO A CENTRAL STATION OTHER OPTIONS MAY BE SELECTED BY FOLLOWING THE ADDITIONAL PROGRAMMING INSTRUCTIONS LOCATIONS 032 047 PROGRAMMING THE PRIMARY TELEPHONE NUMBER The primary telephone number is programmed in successive locations beginning with location 032 Any zero 0 within the telephone number must be programmed as a 10 A 0 indicates the end of the phone number Delays of four seconds can be programmed at any point in the phone number by programming a 13 in the appropriate location If tone dialing is desired program a 15 the location where tone dialing should begin If the entire number should be tone dialing program a 15 in location 032 To dial a program 11 To dial a program a 12 When using split reporting the primary number always takes priority over the secondary telephone number LOCATIONS 048 051 PROGRAMMING THE ACCOUNT CODE FOR THE PRIMARY PHONE NUMBER The account code sent when th
48. ex digits allowed Add for 20PPS LOCATION 183 FORMAT OVER RIDE LOCATION The number selected in this location will select the format options as follows VALUE DESCRIPTION Add for 1800hz transmit Add for 2300hz handshake Add for single round parity LOCATIONS 184 185 RESERVED LOCATIONS LOCATIONS 186 193 ASSIGNING SPECIAL CHARACTERISTICS FOR ZONES 1 8 Locations 186 193 are used to assign individual characteristics for each of zones 1 8 These locations can be used to enable or disable the chime feature restore reporting bypass feature and fast loop response for each of the individual zones 1 8 To enable the features enter a binary number according to the following chart VALUE SPECIAL CHARACTERISTICS Fast loop response time see location 180 Bypass Capability eg Zone Restoral Reporting LOCATION 194 TELEPHONE LINE FAULT MONITOR A 1 in this location will activate the siren a 2 will activate the keypad sounder and a will activate both any time a phone line fault is detected A 9 will activate the siren a 10 will activate the keypad sounder and 11 will activate both if a line fault is detected only while the system is armed If a 10 or 11 is selected Keypad Sounder will sound when system is disarmed The green Ready LED will flash upon detection of a phone line fault if this feature is selected Factory default is 0 disabled LOCATION 195 TELEPHONE LINE FAULT DELAY Locati
49. ften for garage doors this zone type is a second entry exit delay that has its own delay times independent of the standard entry exit delay zone BUILT IN SIREN DRIVER The Ranger 8980E has a built in 112db siren driver When desired this built in driver can be easily converted to a 1 amp voltage output through programming See location 132 page 15 QUICK ARM FEATURE The Ranger 8980E has a one button Quick Arm code which can be used to arm the system by pressing one digit at the keypad The Quick Arm digit is programmed in location 139 on page 16 GROUP BYPASS A designated group of zones can be programmed to bypass by pressing the 9 keys before arming In order to bypass a group of designated zones you must press This feature is enabled in Locations 244 251 Assigning Special Characteristics For Zones on page 27 ENTRY GUARD This unique low level arming mode has been developed to reduce the most common source of false alarms When armed in this mode the opening of any zones designated as Entry Guard zones will initiate the keypad sounder and start a delay see locations 244 251 before creating an alarm This arming mode will encourage system owners to use their system more frequently when the premises is occupied CHIME If so programmed this feature can be turned on and off by entering the first digit of the Master code When the system is in the disarmed state the opening of selected zones will create a one second tone
50. gramming a 2 in location 132 will activate the auxiliary outputs when these events occur Programming 0 in location 132 will cause the Burglary and Panic outputs to activate when the yelping siren is on and the Fire auxiliary output to activate when the steady siren is on See Location 243 LOCATIONS 149 INVERTING THE AUXILIARY OUTPUTS Auxiliary outputs are normally OFF and turn ON when the selected condition occurs For outputs you wish to reverse add up their values according to the following chart and program the sum in this location For example to reverse outputs 2 and 3 program 6 2 4 6 in location 149 VALUE DESCRIPTION Invert auxiliary 1 output Invert auxiliary 3 output Invert auxiliary 2 output Invert auxiliary 4 output LOCATION 150 AC POWER LOSS DELAY FEATURE Location 150 contains the number of two minute delays two to fourteen minutes the communicator will wait before reporting an AC power failure 1 programmed in this location will create a two minute delay anda 7 will create a fourteen minute delay If a 0 is programmed in this location AC power failures will be reported immediately if AC power loss reporting is enabled in locations 120 121 NOTE Do not program a number higher than 7 in this location 17 LOCATION 151 PROGRAMMING NUMBER RINGS ANSWER DOWNLOAD CALL Location 151 contains the number of rings the 8980E must detect before answering the telepho
51. gray Battery Leads Battery leads Standby battery leads black and red connect to a 12VDC lead acid rechargeable battery Do not connect to a dry Cell battery FUSE DESCRIPTION CFUSE DESCRIPTION KEYPAD 1 AMP SPEAKER BELL 2 AMP AUXILIARY SMOKE DETECTOR POWER 1 AMP PROGRAMMING The Ranger 8980E can be placed into the Program mode by use of the 9075 Smart Programmer the 8950 programmer or for Keypad programming by utilizing the 9050 LCD Keypad or the 8601 LED Keypad These methods are described below Using a Programmer Plug the optional 8950 Programmer into the 4 pin male outlet marked PROGRAMMER the Ranger 8980E PC Board and the control will enter the program mode The 8950 will program locations 000 through 255 of the 8980E control See using the LED Keypad below When using a 9075 Smart Programmer please refer to the 9075 Manual Using The LCD Keypad The most straightforward method of Keypad programming is to utilize the 9050 LCD Keypad in the programming mode To access the programming mode enter C 0 0 followed by the four digit Go To Program access code which is factory default 9 0 5 0 this code can be reprogrammed and follow the Keypad prompts See using the LED Keypad below Using The LED Keypad The 8980E can also be programmed by the standard binary method of Keypad programming described below When the 8601 LED Keypad is used for programming enter t
52. he factory default four digit Go To Program access code of 9 7 1 3 NOTE The 8980E must be disarmed to gain access to programming with this code After entry of this code the 8980E will be in the Program mode and the yellow LED s will display the data in location 000 The data is displayed using a Binary system With this system the yellow zone 1 LED equals 1 when illuminated The zone 2 LED equals 2 when illuminated The zone 3 LED equals 4 when illuminated The zone 4 LED equals 8 when illuminated Thus if the data in location 000 is 9 the LED for zone 1 1 and zone 4 8 would be illuminated By adding the two values together 1 8 9 you would determine that the data in location 000 is 9 If the data in location 000 is 6 the LEDs for zone 2 2 and zone 3 4 would be added 2 4 6 indicating the data in that location to be 6 If no LED s are illuminated the location contains a 0 To advance from location 000 through 255 press the key To go to a specific location press the location number followed by the key The yellow LED s will then display the data in that location Data is changed by entering a number 0 to 15 followed by data enter Review the examples in figure 1 on the following page Important Function Codes 9 1 0 When the program mode this function code can be used to write original factory default codes into the 8980E 9 2 0 When the program mode
53. he need for the end of line resistors on that zone When a zone is programmed for normally closed operation only a short will not change the loop condition and an open on that zone will produce a faulted condition This feature will be ignored by any Priority zone To program a zone for normally closed only refer to the chart below and program the appropriate data in this location NOTE FOR U L GRADE A INSTALLATIONS ZONES MUST BE PROGRAMMED AS SUPERVISED ZONES TO PROGRAM FOR N C OPERATION DATA TO PROGRAM IN LOCATION 174 11 x 34466 Pe po 8 eg 20 LOCATION 175 PROGRAMMING ZONES 1 2 7 amp 8 FOR NORMALLY CLOSED OPERATION ONLY Location 175 is used to program zones 1 2 7 amp 8 for normally closed operation only eliminating the need for the end of line resistors on these zones When a zone is programmed for normally closed operation a short on that zone will not change the loop condition and an open on that zone will produce a faulted condition This feature will be ignored by any Priority zone To program a zone for normally closed only refer to the chart on the following page and program the appropriate data in this location NOTE FOR U L GRADE A INSTALLATIONS ALL ZONES MUST BE PROGRAMMED AS SUPERVISED ZONES TO PROGRAM FOR N C OPERATION DATA TO PROGRAM IN LOCATION 175 LOCATION 176 SPLIT REPORTING PROGRAMMING TAMPER DOWNLOAD COMPLETE AND AUTOTEST TO REPORT TO THE SECONDARY PHONE NUMBER
54. he primary phone number Programming a 0 will make the secondary phone number backup the primary and the primary phone number backup the secondary Programming a 3 will make the control alternate from the primary to the secondary number 2 calls each for the number of attempts programmed in location 134 If location 053 contains a 1 only the primary phone number will be called LOCATIONS 054 069 PROGRAMMING THE SECONDARY TELEPHONE NUMBER Locations 054 069 contain the secondary telephone number This number allows certain communicator reports to go to another number or to cause the communicator to dial a second number if the primary number does not respond after the number of attempts programmed in location 134 have been tried unsuccessfully The same number of attempts are made with the back up number Tone dialing and delay instructions are the same as for the primary number LOCATIONS 070 073 PROGRAMMING THE ACCOUNT CODE FOR THE SECONDARY PHONE NUMBER Locations 070 073 contain the account code for the secondary phone number Any zero 0 within the account code must be programmed as a 10 and the communicator will report a zero 0 If the account code is three digits long use locations 070 071 and 072 and program 0 in location 073 to indicate the end of the account code If these locations are left blank the account code in locations 048 051 will be reported LOCATION 074 PROGRAMMING COMMUNICATOR FORMAT FOR SECONDARY
55. ill permit downloading to occur The factory default code is listed in the instructions provided with the CADDX download software package LOCATIONS 264 279 CALL BACK TELEPHONE NUMBER The presence of a phone number in locations 264 279 will cause the control panel to dial back this number after a successful panel access code has been entered If a telephone number is present the control panel will hang up for approximately 36 seconds insuring that the calling party has disconnected then it will call back Any zero 0 within the telephone number must be programmed as an If tone dialing is desired program F in the location where tone dialing should begin If the entire number should be tone dialing program an F in location 264 Four second delays can be obtained anywhere the sequence by programming in the appropriate delay location WARNING THE CALLBACK PHONE NUMBER SHOULD ALWAYS BE REVIEWED FOR ACCURACY BEFORE DISCONNECTING LOCATION 280 ANSWERING MACHINE DEFEAT Location 280 contains the answering machine defeat enable To defeat an answering machine two telephone calls must be made to the premises On the first call let the phone ring the same number of times or less as the number programmed in this location maximum 3 The control panel will detect these rings and start a 45 second timer If a call comes in during that 45 second time frame the control panel will answer on the first ring To disable this feat
56. in location 088 is sent as the ones digit The tens digit is programmed in location 089 If activated the siren can be silenced by entering any arm disarm code LOCATION 090 091 PROGRAMMING FOR AUXILIARY 2 4 amp 6 DOUBLE KEYPRESS The Ranger 8980E has the ability to report an Auxiliary 2 code and activate the pulsing buzzer each time the 4 and 6 keys are pressed simultaneously on the keypad The desired Auxiliary 2 code is programmed in locations 090 091 If both locations are 0 the Auxiliary 2 double keypress is disabled Location 090 contains the standard digit and location 091 contains the extended digit When using 4 2 format the number programmed in location 090 is sent as the ones digit The tens digit is programmed in location 091 If activated the keypad sounder can be silenced by entering any Arm Disarm code 11 LOCATION 092 093 PROGRAMMING FOR KEYPAD PANIC amp DOUBLE KEYPRESS The Ranger 8980E has the ability to report a Keypad panic code and activate the Burg siren each time the and 4 keys are pressed simultaneously on the keypad The desired Keypad panic code is programmed in locations 092 093 If both locations are 0 the Keypad panic double keypress is disabled Location 092 contains the standard digit and location 093 contains the extended digit When using 4 2 format the number programmed in location 092 is sent as the ones digit The tens digit is programmed in location 093 If a
57. ired closing code is programmed in location 102 If this location contains 0 closings will not be reported When using 4 2 format the number programmed in this location is sent as the tens digit The ones digit is automatically the man number When using the remote arming input the man number is 1 When using a one button Quick Arm code the man number is 1 The closing report will not be initiated until the end of the exit delay When using automatic arm the man number is 9 LOCATION 103 PROGRAMMING TO REPORT OPENINGS The Ranger 8980E has the ability to report an opening code each time the control is disarmed The desired opening code is programmed in location 103 If this location contains a 0 openings will be reported When using 4 2 format the number programmed in this location is sent as the tens digit The ones digit is automatically the man number When using the remote arming input the man number is 1 12 LOCATION 104 105 PROGRAMMING COMMUNICATOR CODE FOR ZONE 1 Locations 104 105 contain the communicator code to be reported each time zone 1 creates an alarm Location 104 contains the standard digit and location 105 contains the extended digit When using 4 2 format the number programmed in location 104 is sent as the ones digit The tens digit is programmed in location 105 LOCATION 106 107 PROGRAMMING THE COMMUNICATOR CODE FOR ZONE 2 Locations 106 107 contain the communicator code to be repor
58. le Panic Alarm 13 137 Tamper Alarm 14 602 Periodic Test 15 300 System Fault If Zone ID 0 15 333 Expander Module Trouble If Zone ID 1 15 381 RF Loss of Supervision If Zone ID 2 15 383 Sensor Tamper If Zone ID 3 15 384 Sensor Low Battery If Zone ID 4 The following reports will send fixed event codes regardless of the number programmed in the event code location Event Contact ID Code Event Code Location Keypad Tamper 137 95 Download Complete 412 97 Autotest 602 99 Failed to Communicate 354 101 Closing 401 102 Opening 401 103 AC Loss 301 121 Low Battery 302 123 Trouble 380 124 Bypass 570 125 Restore 2 126 Cancel 406 127 Maintenance Open 401 172 Maintenance Close 401 173 Exit Error 138 210 Recent Closing 401 211 Auxiliary 3 140 253 User on site 605 254 This will send the event code for the zone restored 34 INSTRUCTIONS FOR UNDERWRITERS LABORATORIES 985 AND 1023 INSTALLATIONS When installing a Ranger 8980E in compliance with UL 985 Residential Fire and UL 1023 Residential Burglary the following instructions must be followed m The Ranger 8980E Control Panel and keypad must be mounted indoors and within the protected area m The rechargeable system battery should be replaced at no more than four year intervals The Ranger 8980E should be tested annually with and without A C power This will insure that the battery is connected and adequately charged at the time of the test m All electrical wiring con
59. me alarm history The zone LED s will indicate which zone s caused the last alarm regardless of the number of times the Ranger 8980E has been armed or disarmed since that alarm It annunciates by blinking the zone LED s that caused the alarm and lighting steady those that were bypassed when that alarm occurred The annunciation will continue for 5 seconds Alarm History is erased when the Ranger 8980E is put into the program mode A burglary zone that has been bypassed due to Swinger Shutdown will alternate between continuous and blinking TERMINAL DRAWING amp SPECIAL NOTES JUM FL 35 NI 08 SMVUC T3NVd TOUINOO SUNOH 1SV31 AgGNVIS 2 3 3 WO4 AIIOVdVO 17991 XI 5 XAYO 10868 uIONWe 8 INOZ INOZ 9 INOZ S INOZ ANOZ INOZ INOZ 0015630 TOS L INOZ 4 L AAA ANL 6C 8C 90 96 VE OC l 8l LL vl L cl Ll 01 NIWO 1 DOSN ROMLIN OL 34 IONS INFWAINGA YO OSF 153 ASN SWAISAS 03191 4 99 986 V
60. ne when initiating a download If a number from 1 to 15 is programmed in this location the control will answer after THIS number of rings has been detected If a 0 is programmed in this location the 8980E will not answer the download call Pressing 9 on the keypad while the phone is ringing will cause the control panel to answer the call immediately if the system is in the disarmed state SEE LOCATION 196 or 280 ANSWERING MACHINE DEFEAT LOCATION 152 PROGRAMMING THE NUMBER OF DAYS LEFT UNTIL AUTOTEST REPORT Location 152 contains the number of days left until the next autotest report If this location contains a 0 an autotest signal will be reported the first time the current time equals the autotest time programmed in locations 162 165 Locations 098 099 must be programmed to enable autotest reporting LOCATION 153 PROGRAMMING THE CLOCK CURRENT MONTH Location 153 contains the current month The month must be programmed using a number from 1 to 12 This location must be programmed when using the maintenance code feature see location 167 LOCATION 154 PROGRAMMING CLOCK CURRENT YEAR TENS DIGIT Location 154 contains the current year tens digit If the current year is 1994 this location should contain 8 9 which is the tens digit of the current year LOCATION 155 PROGRAMMING THE CLOCK CURRENT YEAR ONES DIGIT Location 155 contains the current year ones digit If the current year is 1994 thi
61. nected to the Ranger 8980E must be installed in accordance with the National Electrical Code ANSI and NFPA standards When the built in digital communicator is utilized in conjunction with a U L installation it must report at a minimum a burglary zone a fire zone and A C power failure The minimum number of dialing attempts programmed must be 5 if one phone number is used and 3 if two phone numbers are used The maximum number of dialing attempts programmed must be 10 if one phone number is used and 5 if two phone numbers are used m Swinger shutdown feature must not be enabled m Control panel shutdown must not be enabled m U L has tested the Ranger 8980E to be compatible with the Silent Knight No 9000 receiver m All interconnections to the Ranger 8980E must be made using U L labeled limited energy cable m Use Caddx Part EOL 34UL for all U L 985 installations m Force Arming and or Automatic Arming shall not be enabled m 1 For 24 hours of standby power using a 6 5 AH battery limit auxiliary power load to 130 mA 2 For 24 hours of standby power using a 17 2 AH battery limit auxiliary power load to 400 mA TYPICAL FIRE INSTALLATION LAYOUT NOTE Installation of fire detection equipment in all rooms and areas of the household is suggested for early warning fire detection A smoke detector should be installed on each level and in each separate sleeping area the vicinity of but outside of the bedroom with heat or smoke det
62. o be used take the following procedure First remove the jumper marked voltage siren on the PC board Next program a 1 in location 132 Finally replace the jumper in the voltage position Terminals 21 amp 22 will now output 1 Amp at 12VDC NOTE Ten seconds prior to the end of the exit delay the keypad will sound the Last Chance To Exit Warning one long beep followed by three short beeps To disable the Last Chance To Exit Warning add 4 to the Siren Driver Voltage Output data selected above and program the sum 0 4 4 or 1 4 5 in this location LOCATION 133 L E D EXTINGUISH FEATURE Keypad LEDs with the exception of the A C LED will be extinguished after 60 seconds of keypad inactivity if a 1 is programmed in location 133 The LEDs will become illuminated immediately upon a keypress or alarm condition LOCATION 134 ENTERING THE NUMBER OF DIAL ATTEMPTS Location 134 is used to enter the number of dial attempts 1 to 15 attempts the communicator will try for the appropriate phone number s before ending the notification process If this location contains an 8 the communicator will make eight attempts to the first number and then eight attempts to a second number if a second number is programmed as backup LOCATION 135 POWER UP CONDITION If a 1 is programmed in location 135 the Ranger 8980E will power up disarmed if there is a total power shutdown and battery failure If a 2 is programmed in this location
63. on 195 is used to program a delay of sounder activation after a phone line fault has been detected Programmable in 10 second increments a 1 thru 15 will cause a delay of 10 to 150 seconds If a 0 is programmed in this location the activation will be instant If a 6 is programmed in this location the activation will be delayed 60 seconds 23 LOCATION 196 ANSWERING MACHINE DEFEAT Location 196 contains the answering machine defeat To defeat an answering machine two telephone calls must be made to the premises On the first call let the phone ring the same number of times or less as the number programmed in this location maximum 3 and disconnect The control panel will detect these rings and start a 45 second timer during which the control panel will answer the next call on the first ring This location will override location 280 if it contains something other than a 0 factory default LOCATION 197 FORCE ARMING Force Arming is a feature that will allow the Ranger 8980E to be armed without all zones secure no Ready LED illuminated At the end of the exit delay all unsecured zones will automatically bypass while all secure Ready zones will be armed and active in the system Factory default is 0 Force Arming disabled Program a 1 to enable Force Arming In either case all zones excluding 24 hour zones will be delayed during the exit delay Force Arming shall be disabled 0 for UL Listed systems NOTE All zones
64. s location should contain a 4 which is the ones digit of the current year If the current year is 1995 this location should contain a 5 which is the ones digit of the current year LOCATION 156 PROGRAMMING THE CLOCK CURRENT DAY OF THE MONTH TENS DIGIT Location 156 contains the current day of the month tens digit If the current day of the month is the 5th 05 this location should contain a 0 which is the current day of the month tens digit If the current day of the month is the 26th this location should contain a 2 LOCATION 157 PROGRAMMING CLOCK CURRENT DAY THE MONTH ONES DIGIT Location 157 contains the current day of the month ones digit If the current day of the month is the 5th 05 this location should contain a 5 which is the current day of the month ones digit If the current day of the month is the 26th this location should contain a 6 LOCATION 158 PROGRAMMING THE CLOCK CURRENT HOUR TENS DIGIT Location 158 contains the current hour tens digit The time is entered in 24 hour time If the current time is 5 25 PM the 24 hour time is 17 25 so this location should contain a 1 which is the current hour tens digit If the current time is 9 36 AM the 24 hour time is 09 36 so this location should contain a 0 LOCATION 159 PROGRAMMING THE CLOCK CURRENT HOUR ONES DIGIT Location 159 contains the current hour ones digit The time is entered in 24 hour time If th
65. te the information on page 1 of the User s Manual and explain the system operation to all security system owners operators Standard Parts List The Ranger 8980E is shipped with the parts listed below QUANTITY PARTS DESCRIPTION MASTER CONTROL PANEL 8985E REMOTE KEYPAD 8981 3 3K WATT RESISTORS EOL 33 INSTALLATION MANUAL IM 8980E USER S MANUAL OM 8980E 16 5VAC 25VA TRANSFORMER Optional Parts List The following parts are available for use with the Ranger 8980E OPTIONAL PARTS DESCRIPTION REMOTE KEYPAD 8982 LCD ALPHA NUMERIC KEYPAD 9050 DOWNLOADING SOFTWARE DL 900 PROGRAMMER WITH DIGITAL NUMERIC DISPLAY 8950 12VDC 6AH BATTERY B 1260 END OF LINE DEVICE FOR U L 985 FIRE ZONE EOL 34UL These parts have not been tested by Underwriters Laboratories FEATURE DEFINITIONS INTERNAL EVENT LOG Up to 80 events can be stored in memory along with the date and time of the event These events can later be viewed through downloading TELEPHONE LINE MONITOR The Ranger 8980E has a telephone line monitor that monitors the voltage and current of the telephone line for a detection of a faulted phone line See locations 194 amp 195 page 23 KEYSWITCH ARMING Keyswitch arming disarming can be accomplished by using the remote arming input on the PC board and the auxiliary outputs It is not necessary to waste a hardwire zone to accommodate Keyswitch arming disarming SECONDARY EXIT DELAY Used most o
66. ted each time zone 2 creates an alarm Location 106 contains the standard digit and location 107 contains the extended digit When using 4 2 format the number programmed in location 106 is sent as the ones digit The tens digit is programmed in location 107 LOCATION 108 109 PROGRAMMING THE COMMUNICATOR CODE FOR ZONE 3 Locations 108 109 contain the communicator code to be reported each time zone 3 creates an alarm Location 108 contains the standard digit and location 109 contains the extended digit When using 4 2 format the number programmed in location 108 is sent as the ones digit The tens digit is programmed in location 109 LOCATION 110 111 PROGRAMMING THE COMMUNICATOR CODE FOR ZONE 4 Locations 110 111 contain the communicator code to be reported each time zone 4 creates an alarm Location 110 contains the standard digit and location 111 contains the extended digit When using 4 2 format the number programmed in location 110 is sent as the ones digit The tens digit is programmed in location 111 LOCATION 112 113 PROGRAMMING THE COMMUNICATOR CODE FOR ZONE 5 Locations 112 113 contain the communicator code to be reported each time zone 5 creates an alarm Location 112 contains the standard digit and location 113 contains the extended digit When using 4 2 format the number programmed in location 112 is sent as the ones digit The tens digit is programmed in location 113 LOCATION 114 115 PROGRAMMING THE COMMUNICATO
67. this location should contain 0 LOCATION 163 PROGRAMMING THE AUTOTEST TIME HOUR ONES DIGIT Location 163 contains the ones digit of the hour that the autotest report is desired The time is entered in 24 hour time If the desired autotest time is 5 25 PM the 24 hour time is 17 25 so this location should contain 7 which is the ones digit of the hour for autotest If the desired autotest time is 9 36 AM the 24 hour time is 09 36 and this location should contain a 9 LOCATION 164 PROGRAMMING THE AUTOTEST TIME MINUTES TENS DIGIT Location 164 contains the tens digit of the minutes after the hour that the autotest is desired The time is entered in 24 hour time If the desired autotest time is 5 25 PM the 24 hour time is 17 25 so this location should contain a 2 which is the tens digit of the minutes for autotest time If the desired autotest time is 9 36 AM the 24 hour time is 09 36 this location should contain a 3 LOCATION 165 PROGRAMMING THE AUTOTEST TIME MINUTES ONES DIGIT Location 165 contains the ones digit of the minutes after the hour that the autotest is desired The time is entered in 24 hour time If the desired autotest time is 5 25 PM the 24 hour time is 17 25 so this location should contain a 5 which is the ones digit of the minutes for autotest time If the desired autotest time is 9 36 AM the 24 hour time is 09 36 and this location should contain a 6 LOCATION 166 PROGRAMMING THE
68. tor code The bypass will be reported at the end of the exit delay for non 24 hour zones 24 hour zones will report a bypass immediately When a bypass is removed a restore will be reported if Restore is enabled in location 126 LOCATION 126 PROGRAMMING THE COMMUNICATOR CODE FOR RESTORAL Location 126 contains the communicator code that will be sent for restoral of a zone If this location contains a no restorals will be reported If a restoral code is programmed and an extended format is selected the restorals will be reported by zone If a restoral code is programmed and an extended format is not selected a restoral code will be sent when all of the previously reported conditions have restored When using 4 2 format the number programmed in this location is sent as the first or tens digit The second or ones digit will be the ones digit of the zone or condition that restored LOCATION 127 PROGRAMMING THE COMMUNICATOR CODE FOR CANCEL EXCEPTION OPENING Location 127 contains the communicator code that will be sent for cancel The cancel code programmed in this location will be sent if an arm disarm code is entered after a trip on zones 1 through 8 has been reported excluding 24 hour zones After a cancel has been reported no loop restorals will be transmitted on non 24 Hour zones If this location contains a 0 cancel is disabled When using 4 2 format the number programmed in this location is sent as the tens digit The on
69. u pisaRucopr sss 020 023 10 UsERW6ARM DIsaRMcoDE J upsaez 024027 useR 7ARM dIsaRMcoDeE sss GO TO PROGRAM ACCESS CODE O U c CE Ces PHONE NUMBERS ACCOUNT CODES amp FORMATS 03209 PRIMARYPHONENUMBERDIGITS1 8 j j 040 047 8 PRIMARY PHONE NUMBER DIGITS 9 16 0 DISABLED s pRimanyaccountcope 1111 or sao s primanyronmar Tf or iste SECONDARY PHONE NUMBER AS BACK UP Or ENABLED 054061 SECONDARYPHONENUMBERDIGITS1 8 sas 062 069 seconpary phone numeer pieis o 16 esas 070073 seconpanvaccountcooe 111 f or issued oa o seconparyrormar o o CONTROL amp COMMUNICATOR FEATURES LOCATION PAGE DESCRIPTION DATA DEFAULT ENTRY DELAY TIME 10 SECOND INCREMENTS 330 SECONDS EXIT DELAY TIME 10 SECOND INCREMENTS 6 60 SECONDS SIREN SHUTDOWN RECYCLE TIME OUT 2 MINUTE INCREMENTS MINUTES ZONE 1 TYPE 3 ENTRY EXIT ZONE 2 TYPE 5 INT FOLLOWER 10 ZONE 3 TYPE 6 INSTANT 6 nm ZONE4TYPE ver INSTANT 6 INSTANT 10 ZONE5TYPE F INTERIOR SECONDARY x o zonose sce x Tons os 10 20 __ 6 INSTANT LOCATION PAGE DESCRIPTION DEFAULT
70. up Bypass Zone Trouble Reporting CROSS ZONING This feature requires a trip on 2 or more zones programmed as Cross Zones within the time frame programmed in Location 255 1 15 minutes It is important that at least 2 zones be programmed for cross zoning if this feature is to be used First zone trip will initiate the keypad sounder second zone trip creates an alarm Either can be silenced by entering a valid code ENTRY GUARD An addition to modes described in location 131 Enable by adding 4 to the number programmed in location 131 When enabled all non Entry Guard zones will be bypassed and all other zones will be delayed when the Instant LED is activated When the Instant LED is off all non bypassed zones will resume their normal characteristics The Entry Guard feature is activated by pressing the key during the exit delay GROUP BYPASSING This feature will allow all zones programmed as group bypass zones to be bypassed by entering 9 when the control is disarmed LOCATION 252 253 PROGRAMMING TO REPORT KEYPAD AUXILIARY 3 The Ranger 8980E has the ability to report a Silent Auxiliary 3 code each time the 7 and 9 keys are pressed simultaneously on the keypad The desired Auxiliary 3 code is programmed in locations 252 253 If both locations are 0 the Auxiliary 3 double keypress is disabled Location 252 contains the standard digit and location 253 contains the extended digit When using 4 2 format the number
71. ure program in this location NOTE If anything is programmed in location 196 it will override this location LOCATION 281 LOCAL PROGRAMMING LOCKOUT Location 281 is used to disable local programming lockout If a 5 is programmed in this location all local programming is locked out If an is programmed in this location all programming functions related to the digital communicator will be locked out Any other number in location 281 will allow all local programming LOCATION 282 CONTROL PANEL SHUTDOWN Location 282 is used to shut down the control panel Programming an A in this location will completely shutdown the control panel The keypad will appear dead and the siren and communicator will not operate WARNING EXTREME CARE SHOULD BE TAKEN NOT TO INADVERTENTLY PROGRAM THIS LOCATION ADDITIONAL COMMENTS ABOUT THE 8980E 1 The Fire Panic Burglary options for the auxiliary outputs be programmed for momentary or to follow the siren Programming a 2 in location 132 will activate the auxiliary outputs when these events occur Programming a in location 132 will cause the Burglary and Panic outputs to activate when the yelping siren is on and the Fire auxiliary output to activate when the steady siren is on 2 Location 142 has been enhanced to include a bell test at arming by programming a 2 For a bell test at exit delay expiration program a 4 For a bell test at closing kissoff program an 8 3 The

Ranger 8980e_man - Protection Systems Inc.

Contents

Download Pdf Manuals

Related Search

Related Contents