iSeries Industrial Videoscope (Technical Borescope) Data Sheet
Contents
1. The flexible body is resistant to water and 5 water solution of NaCl b Housing environmental parameters min air operating temperature 10 C air pressure range 1 0 at Level of water resistance allows application at water splashes and drops Please remember these rules when handling or operating the iSeries Scope Do not pinch Videoscope s flexible insertion tube or light guide cable during operation or storage Do not step on the Vidoescope insertion tube or light DO NOT DROP guide cable Avoid shocks of articulating portion or light guide O NAA SL end tip against solid objects NE Do not drop Video it ts AS p Videoscope or its components p E Do not twist or bend flexible insertion tube or light MOS guide cable to a radius of less than 35 or 45 mm A A Do not look directly into light beam coming from the light source or from the end tip of Videoscope s insertion tube Do not immerse Videoscope housing into water and do not wash it in water stream Do not apply excessive force during insertion or withdrawal of Videoscope flexible portion Do not straighten the articulating section with hands Do not allow abrupt movement during insertion or withdrawal of Videoscope s flexible insertion tube during control handle movement and during packing of Videoscope into the case Do not leave the Videoscope unattended while it is still connected to the activated light source Description Flexible body2. The working body of all iSeries Scopes is flexible and the articulating section is easy to bend The flexible body has a multi layer protective sheath The outer shell i e a tungsten wire braided sleeve ensuring high flexible body strength and durability is fitted over moisture resistant and oil resistant plastic tubing intended for flexible body sealing Connector Cable Connector Cabel is used to transmit the video signal from the iSeries Scope to a TV monitor or image capture unit and to supply the iSeries Scope with power from a 12 V power supply The connector cable is connected to the corresponding connector plug on the iSeries Scope housing and to the corresponding jacks on a TV monitor or on the image capture unit and on the power supply unit Light source connection The iSeries Scopes are equipped with an integrated light guide cable with changeable adapter plugs or with a ACMI Light Post on the housing to attach an external light guide for an optional light source Grounding connector Grounding connector is intended to ground the iSeries Scope directly on the object being inspected thus returning the accumulated static electricity to the housing elements and eliminating the possibility of fuel gas ignition as a result of a static electricity discharge Articulating section With the straight flexible body the articulating section can be bend with the help of the control lever on the Videoscopes housing in the bend plane over th
3. e Place a TV monitor or Image capture device a light source and a power supply unit beside the Videoscope Make sure that the power supply switches of all components are in the OFF position Take Connector cable out of the case and attach its appropriate connectors to the Videoscope at one end and to TV monitor or Image capture device and power supply unit at the other end Connect light guide cable or external light guide with the optional light source and turn on the light source Connect a TV monitor or Image capture device a light source and a power supply unit to the power line outlet and turn all the equipments components on Direct the articulating section head to any object Make sure the image on the TV monitor screen corresponds to the object being observed If necessary adjust the TV monitor following the instructions given in TV monitor user manual 8 12 Do not allow striking the articulating section by hand If you are not going to use the Series Scope at this time remove all equipment components and store it If your going to use the scope please go ahead as follows Connect the grounding cord to the connector on the iSeries Scope housing at one end and to the housing of the object to be inspected at the other end The grounding of the iSeries Scope housing is obligatory for inspection of objects containing inflammable or explosive materials Connect a TV monitor a light source and a power supply unit to the power line outlet
4. 4mm 930 00100 0004 V 930 00100 0005 V 930 00200 0012 V 6mm 930 00100 0002 V 930 00100 0003 V 930 00200 0006 V 930 00200 0007 V 930 00200 0008 V 8mm 930 00100 0001 V 930 00200 0013 V 930 00200 0001 V 930 00200 0002 V 930 00200 0003 V 930 00200 0004 V 930 00200 0009 V 930 00200 0005 V i4 8 600 i4 8 750 i 8 600 i 8 800 i 8 1200 i 8 1500 8 0mm 8 0mm 8 0mm 8 0mm 8 0mm 8 0mm Tip Adapter Colour Code i4 SVTA x4 SVTA i4 Adapter Tool 6 SVTA n 6 SVTA f i6 Objective red 16 Objective black 6 Lens Tool 18 SVTA 18 Lens Tool 18 Objective red 8 Objective silver 8 Objective black 18 Objective blue 18 Objective gold 18 Lens Tool 90 L R 90 U 90 D 90 L R 90 U 90 D 0 0 0 0 DOV 90 side 90 side 0 forward 0 forward 90 Side 0 forward 0 forward 0 forward 0 forward 0 forward 28 60 90 28 60 90 28 60 90 28 60 90 28 60 90 28 60 90 090 0 90 090 0 90 090 0 90 Working Distance 5 0mm 15 0mm 5 0mm 15 0mm 5 0mm 15 0mm 15 0mm 50 0mm 5 0mm o 5 0mm o adjustable 5 0mm 5 0mm o 5 0mm o 5 0mm 5 0mm Operation Environment The Series Scopes are intended for use in the following environmental and ambient parameters a Flexible Body environmental parameters min air operating temperature 10 C air pressure range 1 0 at
5. and turn on all the equipments components Make sure that there is an image on the TV monitor screen If necessary adjust the TV monitor following the instructions given in TV monitor manual Adjust the optical system Install a test object at an expected operating distance from the articulating section head lens Any object may serve purpose but preferably it should be of the same material and finish as the object to be inspected Move the lens in the axial direction screw it in or out within one revolution with the special wrench until you obtain a well defined test object on the monitor screen The lens shall be only screwed in or out using only the special tool incorporated in the Videoscope kit Insert the flexible body into the cavity to be investigated in accordance Take the iSeries Scope housing in one and its flexible body in the zone of the articulating section coupling with the other hand Set move the control lever s to the neutral position Then the articulating section will become straight Insert the flexible body into the open hole Diameter of the hole or the width of the opening should be not less than the outer diameter of the flexible Insertion tube Watch the insertion on the TV monitor screen Do not apply large effort when inserting the flexible body and do not allow flexible body jamming Further do not allow catching of the flexible body protective sleeve on the edges of the inlet hole opening and emerging
6. be employed by skilled and qualified personnel appropriate to the application Electric shock No unauthorised opening of the casing There is high danger of electric shock due to parts being under voltage Caution Never look directly into the light emitting part of the videoscope There is ultraviolet and infrared as well as highly intensive visible light coming from the light source These can cause injuries of eyes and skin Always switch off the light source or adjust brightness to a minimum when changing or controlling the objective or the distal end of the videoscope An iSeries Scope should not come into contact with a current or voltage source Damages on the product or an electric shock for you may result Always switch off the iSeries Scope before connecting an iTool or a video camera The housing of the iSeries Scope in opposite to the insertion tube is not watertight Operate the housing of the Series Scope in dry environment only Only use the iSeries Scope as intended Scope of delivery The iSeries Scope is delivered with the following items if not negotiated otherwise Objective Lens with FOV 90 Colour Code red Objective Lens with FOV 58 Colour Code black Objective Lens Tool Exchangeable Light Guide Adapter Plug for IT Concepts Light Guide Adapter Video Connector Cable Typ Il with BNC Adapter 12V DC Adapter 0 42A System Carrying Case You will find additional accessories in this operating manual o
7. of the elements structure If you encounter resistance during the insertion stop the process Start withdrawing the flexible body slowly In case the flexible body can be withdrawn easily you may resume inserting it with slightly effort observing the process on the TV screen Observe the process on the TV monitor screen move in the articulating section of the flexible body until it reaches the beginning of the cavity bend Check either visually or from the drawing of the object under investigation that passing of the articulating section rigid head through the cavity bend is feasible Observing the process on the TV monitor screen use the control lever to bend the articulating section head in the direction of the cavity bend The procedure of passing through every subsequent bends is similar to the one described above If you feel back a recoil of the flexible body during the insertion it means that further insertion is not possible and should be stopped Nx Before starting articulating section withdrawal set the control lever into neutral position Slightly turning the control lever and observing the process on the TV monitor screen start withdrawing slowly the Series Scope s flexible body While withdrawing never apply large efforts on the flexible body control lever or Series Scope housing Observing the process on the monitor screen manipulate the control lever to ensure equidistant position of articulatin
8. Operating Manual OM_iSeries_EN_00 Ueoncerrs International Technology Concepts L Relmote visual inspection LA A a Ma L l d ries Videoe dos Operation Manual C IT Concepts GmbH www itcworld de infoQitcworld de Content Preamble Warning notices and precautions Scope of delivery Presentation Technical specifications Operation environment Description Operation Care and storage Disposal Declaration of compliance with CE Preamble We congratulate you on buying your iSeries Videoendoscope in the following just named iSeries Scope The Series Scope constitutes the core of the Tool System Always keep the Operating Manual with the iSeries Scope It contains all information for safe and efficient operation However should you have further questions feel free to contact our service team Your IT Concepts Team Germany IT Concepts GmbH GewerbestraBe 17 D 35633 Lahnau Tel 49 6441 67 92 99 0 Fax 49 6441 67 92 99 99 E mail info itcworld de Web www itcworld de Warning notices and precautions Read the operating manual carefully before using the iSeries Scope The Series Scope is designed for a diversified field of applications in industry building and science Caution The iSeries Scope has not to be used in specially designated or prohibited areas e g explosion prevention Caution The iSeries Scope has to
9. X 200 24015 0000 X 200 24020 0000 X 200 24030 0000 X x2 4 100 x2 4 150 x2 4 200 x2 4 300 120 U D 120 U D 120 U D 120 U D 0 90 Yes 0 90 Yes 0 90 Yes 0 90 Yes iSeries Videoscopes 200 24015 0000 200 24020 0000 200 24030 0000 200 46015 0000 l 200 46020 0000 200 46030 0000 200 46060 0000 200 46075 0000 200 06060 0005 200 06080 0005 200 06120 0005 200 06150 0005 I 200 28010 0005 200 48015 0000 200 48020 0000 200 48030 0000 12 4 150 i2 4 200 i2 4 300 14 6 150 i4 6 200 14 6 300 i4 6 600 14 6 750 1 6 600 1 6 800 1 6 1200 1 6 1500 12 8 100 K 14 8 150 i4 8 200 14 8 300 120 U D 60 120 U D 60 120 U D 60 100 L R 160 U 130 D 60 90 100 L R 160 U 130 D 60 90 100 L R 160 U 130 D 60 90 6 0mm 90 L R 90 U 90 D 60 90 6 0mm 90 L R 90 U 90 D 60 90 6 0mm 0 60 90 6 0mm 0 60 90 6 0mm 0 60 90 6 0mm 0 60 90 8 0mm 180 U D 28 60 90 8 0mm 100 L R 160 U 130 D 28 60 90 8 0mm 100 L R 160 U 130 D 28 60 90 8 0mm 100 L R 160 U 130 D 28 60 90 0 90 0 90 090 0 90 090 0 90 090 0 90 0 90 0 90 090 0 90 090 0 90 090 0 90 4 0mm 4 0mm 4 0mm 6 0mm 6 0mm 6 0mm 200 48060 0000 200 48075 0000 200 08060 0005 200 08080 0005 200 08120 0005 l 200 08150 0005 l Iteml No
10. anual may be reprinted photo mechanically mechanically or digitally copied or reproduced without the express approval of IT Concepts GmbH CE Declaration of Confirmity We declare of our own responsibility that the product iSeries Scope complies with the following directive or normative documents EN61326 1 2006 Emission and Immunity according to directive 2004 108 EG Electromagnetic Compatibility Lahnau 2009 07 15 Frank Schlagenhauf Manager Product Development
11. ases 900 06000 0008 900 06000 0026 900 06000 0028 4 SVTA x4 SVTA i4 x4 Adapter Tool i6 SVTA n i6 SVTA f 6 Objective red 6 Objective black 6 Lens Tool 18 SVTA 18 Lens Tool i8 Objective red 8 Objective silver 8 Objective black 8 Objective blue 8 Objective gold 8 Lens Tool Video cable Typ I 5 Pin to 5 Pin0 3m Video cable Typ 5 Pin to 5 Pin 1 0m Video cable Typ 5 Pin to 5 Pin 1 8m Video cable Typ 1 5 Pin to 5 Pin3 0m AC Adapter 12V DC 0 42A System Carrying Case standard iCase Caseres Product return in case of service To help us to efficiently execute any maintenance or repair of the product we ask you to download the Service Form Product Return from our homepage www itcworld de Please fill out the questionnaire as detailed as possible and send it to our address together with the product IT Concepts GmbH Gewerbstrasse 17 D 35633 Lahnau Disposal This device has do be disposed separately from domestic waste After the end of its useful service life you have to send it back to the producer or your local dealer I CERT DIN EN ISO 9001 2000 2009 IT Concepts GmbH All rights reserved This Operation Manual meets the status at the time of going to print IT Concepts accepts no liability for any printing errors contained herein Design subject to change We reserve the right of making technical changes at any time No sections of this Operation M
12. e angle of not less than shown in the table technical data The width of a cavity to be inspected must be 50mm at least to allow head free articulation in one direction At the end of the articulating section there is a head 20mm long with a lens of straight observation Control lever Control lever serves to move bend the articulating section with the head When the control lever 1 L R is turned the articulation section is moved in the vertical plane When control lever 2 U P is turned the articulating section is moved in the horizontal plane When levers 1 L R 2 U D are turned in the directions indicated on the housing by arrows the articulating section is moved bent in the corresponding planes Are both control levers in Neutral position the articulating section is straight The chosen position bend of the articulating section with head fixed automatically after releasing the control lever levers Image Capture Button The capture button is used in cooperation with an image storing device like the Tool or the Capture If the iSeries Scope is connected to the storing device images audio commentaries and videos can be easily captured with the help of the Image capture button Operating The iSeries Scope should be checked before use If a problem is found stop the operating and contact your authorized dealer Remove the iSeries Scope from it s case and assure you do not bend its flexible body
13. g section head from the cavity walls during the whole process If you feel opposition during withdrawal rotate the Series Scope housing slightly along its longitudinal geometric axis in both direction and continue the withdrawing Care and Storage The procedure described below must be followed every time the Videoscope operation is completed Failing to clean the Videoscope right after the work may lead to corrosion and Videoscope damage Choice of the required cleaning procedures depends on the type and degree of contamination Before cleaning any equipment components must be released Cleaning the flexible body contaminated with dust Wipe the flexible body with a soft clean cotton cloth Articulating section should be wiped with a separate clean cotton cloth moistened with water Finally clean the end tip optical surfaces with a Q Tip damped in highly purified alcohol Do not use harsh or soiled cloth for cleaning Cleaning the flexible body contaminated with mud Take off mud from the outer layer with a soft cotton cloth Wash thoroughly the flexible body with the help of a sponge using mild detergent After cleaning dry the flexible probe portion with a soft cotton cloth End tip butt should be wiped with a separate clean cotton cloth Finally clean the end tip optical surfaces with a Q TipO damped in highly purified alcohol Cleaning the housing contaminated with dust or mud Wipe the dirty parts with a soft damp if necessary c
14. n page 11 in our accessories catalogue or on our homepage www itcworld de Presentation Videoscope has a flexible body allowing easier insertion into spaces to inspect and a wider range of the Videoscopes functional possibilities This flexible body can be inserted into a pipe or a cavity or fixed in a position convenient for an operator with the help of special fittings and facilities In the latter case the flexible body can be arranged inside the hollow guides linear or bent pipes or other facilities ensuring its definite location The articulating section can be bend in 2 directions The possibility of turning bending the articulating section during insertion greatly facilitates it is passing trough bends Protective tungsten sheathing improves flexible body wear resistance during its contact with the metal parts of the objects under investigation contributing to Videoscopes longer service life Grounding connector available on the Videoscopes housing enables grounding the Videoscope directly on the object being observed e g a car engine what eliminates the possibility of a fuel or gas ignition as a result of a static electric discharge The Videoscope is equipped with an integrated light cable with changeable adapter plugs or with a light post on the Videoscope housing to attach an external light guide for an optional light source Technical Data Item No Modell Articulation DOV Side View Tip eXtreme Videoscopes 200 24010 0000
15. otton cloth using mild detergent Then dry the Videoscope thoroughly Do not wash Videoscope housing under flowing water and do not wipe it with wet cloth Detach any equipment components from the Videoscope Make sure that the Videoscope is clean and dry If necessary clean it following the instructions given in the previous chapter Set the control lever in tothe neutral position whereupon the articulating section will get straightened _ Put the Videoscope into its case Lay the Videoscope housing into the corresponding recess Then lay subsequently the Videoscope flexible body as well as the connection cable adapter and wrench into their respective recessed channels in the case Do not allow sharp bends with a radius less than 50mm of the flexible body Spare Parts and Accessoires Use only IT Concepts original spare parts and accessories for your iSeries Scope Accessories Set 900 00001 0002 AC Adapter 12V DC 0 42A Video Cable Typ II with BNC Adapter Operating manual Objective Lenses and Accessories 930 00100 0004 V 930 00100 0005 V 930 00200 0012 V 930 00100 0002 V 930 00100 0003 V 930 00200 0006 V 930 00200 0007 V 930 00200 0008 V 930 00100 0001 V 930 00200 0013 V 930 00200 0001 V 930 00200 0002 V 930 00200 0003 V 930 00200 0004 V 930 00200 0009 V 930 00200 0001 V Connector Cables 930 00500 0003 P 930 00500 0019 P 930 00500 0001 P 930 00500 0017 P AC Adapters 900 04003 0004 V Carrying C
16. to a radius less than 50mm Do not hold the iSeries Scope by its articulating section when removing it from the case Inspect the flexible body for the absence of visual external damage Check the condition of the optical surfaces on the articulating section head lens and light post If necessary wipe them with a soft clean cotton cloth moistened with water Finally clean the lens optical surface with a Q Tip damped in highly purified alcohol Check operability of the control lever as follows 2 way Articulation Straighten the flexible body press the lever to the housing and turn it slowly along the longitudinal axis from one extreme position to another one The articulating section will bend in the bend plane over the angle 180 Then bring the lever back into the neutral middle position and release it 4 way Articulation Press lever 1 L R to the housing and turn it slowly along the longitudinal axis from one extreme position to another The articulating section will bend over an angle 160 130 Then bring the lever back into the Neutral position and release it Similarly press lever 2 U D to the housing and turn it slowly along the longitudinal axis from one extreme position to another In this case the articulating section will bend in the plane normal to the plane over the angle not less than 100 Then bring the lever 2 U D back into the Neutral position and release it Operating
Download Pdf Manuals
Related Search