Electrolux ESL 65070 Dishwasher User Guide Manual Operating
Contents
1. e The quality of the detergent can be the cause Dishes are wet e The programme is without a drying phase or with a low temperature drying phase e The rinse aid dispenser is empty e The quality of the rinse aid can be the cause e The quality of the combi detergent tab lets can be the cause Try a different brand or activate the rinse aid dispens er and use rinse aid together with the combi detergent tablets Refer to HINTS AND TIPS for other possible causes 10 2 How to activate the rinse aid dispenser The activation of the rinse aid dispenser can occur only with the multitab option activated 1 Press the on off button to activate the appliance Make sure that the appli Downloaded from DishWasher Manual com Manuals ance is in setting mode refer to Set ting and starting a programme 2 Press and hold function buttons B and C at the same time until the indi cators of function buttons A B and C start to flash 3 Press function button B e The indicators of function buttons A and C go off e The indicator of function button B continues to flash 11 TECHNICAL INFORMATION Dimensions Electrical connection Width Height Depth mm Refer to the rating plate ENGLISH 15 e The end indicator is off 4 Press function button B e The end indicator comes on The rinse aid dispenser is active 5 Deactivate the appliance to confirm the setting2. i Fill the rinse aid dispenser when the lens E is clear You can turn the selector of the released quantity B between po sition 1 lowest quantity and posi tion 4 highest quantity 7 DAILY USE 1 Open the water tap 3 Load the baskets 2 Press the on off button to activate the 4 Add the detergent appliance Make sure that the appli e If you use the combi detergent tab ance is in setting mode refer to Set lets activate the multitab option ting and starting a programme e f the salt indicator is on fill the salt Downloaded frf RA Vasher Manual com Manuals 10 wwweelectrolux com 5 Set and start the correct programme for the type of load and the degree of soil 7 1 Using the detergent Press the release button B to open the lid C 2 Put the detergent in the compartment A 3 If the programme has a prewash phase put a small quantity of deter gent on the inner part of the appli ance door 4 If you use detergent tablets put the tablet in the compartment A 5 Close the lid Make sure that the re lease button locks into position 7 2 Setting and starting a programme Setting mode The appliance must be in setting mode to accept some operations The appliance is in setting mode when after the activation all the programme in dicators come on If the control panel shows other condi tions press and hold functio
3. 2 Electrolux ESL 65070R EN DISHWASHER USER MANUAL Downloaded from DishWasher Manual com Manuals 2 wwweelectrolux com CONTENTS 1 SAFETY INSTRUCTIONS os 5 45 5 445 44 pnag aiii iiai a ine ieg iie iiei 2 PRODUCT DESCRIPTON rit iiii tinea eae a ea aia daik a dee wage Re 3 CONTROLPANE ii eis ee G nia eke e ee eer l 4 PROGRAMMES serii E E E a E A E R ETEA S OPTONS an AN E ani a E E E E oe ns E A R eases E A T 6 BEFORE FIRST USE errepre eos nite ei tenie eiar eRe RE RED ea eee ee eS 7 Te DAILY USES seat ei bhi ie Lok hee cada ade teh hE Elio Laas 2 bene gare dade deed 8 HINTS AND TIPS crte terenon cance ee ee ee ee pk DEG Ed RE Ae PR ER Geb 11 9 GARE AND CLEANING jcc cide eeied Ra Rha ew eee eae ee ede REE Hae ee 12 10 TROUBLESHOOTING ss ia meintan ea wh lee en have Peak ws Ree eden dh bnew aie 13 11 TECHNICAL INFORMATION 00 00 eee 15 WE RE THINKING OF YOU Thank you for purchasing an Electrolux appliance You ve chosen a product that brings with it decades of professional experience and innovation Ingenious and stylish it has been designed with you in mind So whenever you use it you can be safe in the knowledge that you ll get great results every time Welcome to Electrolux Visit our website for Ei Get usage advice brochures trouble shooter service information www electrolux com f Register your product for better service EY www electrolux com productregistration Buy Acc
4. sure that the appli ance is in setting mode refer to Set ting and starting a programme 2 Press and hold function buttons B and C at the same time until the indi 6 BEFORE FIRST USE 1 Make sure that the set level of the wa ter softener agrees with the water hardness in your area If not adjust the water softener Contact your local water authority to know the water hardness in your area 2 Fill the salt container 6 1 Adjusting the water softener Water hardness ENGLISH 7 cators of function buttons A B and C start to flash 3 Press function button C e The indicators of function buttons A and B go off e The indicator of function button C continues to flash e The end indicator comes on 4 Press function button C The end in dicator goes off the acoustic signals are deactivated 5 Deactivate the appliance to confirm the setting How to activate the acoustic signals 1 Refer to How to deactivate the acous tic signals step 1 through 8 2 Press function button C e The indicators of function buttons A and B go off e The indicator of function button C continues to flash e The end indicator is off 3 Press function button C The end in dicator comes on the acoustic signals are active 4 Deactivate the appliance to confirm the setting 3 Fill the rinse aid dispenser 4 Open the water tap 5 Processing residues can stay in the applia
5. 6 Adjust the released quantity of rinse aid 7 Fill the rinse aid dispenser 596 818 898 550 Voltage 220 240 V Frequency 50 Hz Water supply pressure Min max bar MPa 0 5 0 05 8 0 8 Water supply 1 Cold water or hot water max 60 C Capacity Place settings 12 Power consumption Left on mode 0 10 W Off mode 0 10 W 1 Connect the water inlet hose to a water tap with a 3 4 thread 2 If the hot water comes from alternative sources of energy e g solar panels aeolian energy use the hot water supply to decrease energy consumption 12 ENVIRONMENT CONCERNS Recycle the materials with the symbol a Put the packaging in applicable containers to recycle it Help protect the environment and human health and to recycle waste of electrical and electronic appliances Do not dispose appliances marked with the symbol X with the household waste Return the product to your local recycling facility or contact your municipal office Downloaded from DishWasher Manual com Manuals www electrolux com shop Downloaded from DishWasher Manual com Manuals 117933341 A 422012 fan
6. 70 9 Crockery cut Wash 45 C or 70 AUTO lery potsand C pans Rinses Dry Downloaded from DishWasher Manual com Manuals 6 wwweelectrolux com Pro Degree of Programme Dura Energy Water gramme soil phases tion kWh I 1 Type of load min 5 Heavy soil Prewash 130 We 16 17 Crockery cut Wash 70 C 150 lery pots and Rinses pans Dry J30 3 Fresh soil Wash 60 C 30 0 9 9 Crockery and Rinse cutlery 50 Normal soil Prewash 150 TO Wed Eco 4 Crockery and Wash 50 C 160 cutlery Rinses Dry y Normal or light Wash 45 C 70 80 0 9 1 0 12 13 soil Rinses Delicate Dry crockery and glassware 1 The pressure and the temperature of the water the variations of the mains supply the options and the quantity of dishes can change the programme duration and the consumption values 2 The appliance senses the degree of soil and the quantity of items in the baskets It automatically adjusts the temperature and quantity of the water the energy consumption and the programme duration 3 With this programme you can wash a load with fresh soil It gives good washing results in a short time 4 With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil This is the standard programme for test institutes Information for test institutes For all the necessary information for test performance send an email to info test dishwasher production com Write do
7. Always pull the e Do not let persons children included with reduced physical sensory reduced mains plug mental functions or lack of experience e Do not touch the mains cable or the and knowledge use the appliance They mains plug with wet hands must have supervision or instruction for e Only for UK and Ireland The appli the operation of the appliance by a per ance has a 13 amp mains plug If it is son who is responsible for their safety necessary to change the fuse in the e Do not let children play with the appli mains plug use a 13 amp ASTA BS ance 1 362 fuse e Keep all packaging away from children This appliance complies with the E E C e Keep all detergents away from children Directives e Keep children and pets away from the appliance door when it is open Water connection f e Make sure not to cause damage to the 1 2 Installation water hoses e The appliance is to be connected to the water mains using the new supplied hose sets Old hose sets must not be e Remove all the packaging e Do not install or use a damaged appli ance reused e Do not install or use the appliance e Before you connect the appliance to where the temperature is less than O new pipes or pipes not used for a long C time let the water flow until it is clean e Obey the installation instruction sup s The first time you use the appliance plied with the appliance make sure that there is no leakage e Make sure that the
8. Washer Manual com Manuals Make sure that they do not move 12 wwweelectrolux com e Make sure that the spray arms can e The position of the items in the baskets move freely before you start a pro is correct gramme e The programme is applicable for the type of load and for the degree of soil 8 4 Before starting a e The correct quantity of detergent is programme used e There is dishwasher salt and rinse aid Make sure that unless you use combi detergent tab e The filters are clean and correctly instal lets led e The cap of the salt container is tight e The spray arms are not clogged 9 CARE AND CLEANING A WARNING i Dirty filters and clogged spray Before maintenance deactivate arms decrease the washing re the appliance and disconnect the sults mains plug from the mains socket Make a check regularly and if necessary clean them 9 1 Cleaning the filters 1 Turn the filter A counterclockwise and remove it 2 To disassemble the filter A pull apart A1 and A2 3 Remove the filter B Wash the filters with water 5 Put the filter B to its initial position Make sure that it assembles correctly under the two guides C gt Downloaded from DishWasher Manual com Manuals ENGLISH 13 6 Assemble the filter A and put it into position in filter B Turn it clockwise until it locks An incorrect position of the filters can cause bad washing results and d
9. amage to the appliance 9 2 Cleaning the spray arms Only use neutral detergents Do not use abrasive products abrasive cleaning pads Do not remove the spray arms or solvents If the holes in the spray arms are clogged remove remaining parts of soil with a thin pointed object 9 3 External cleaning Clean the appliance with a moist soft cloth 10 TROUBLESHOOTING The appliance does not start or it stops With some problems different indica during operation tors flash continuously or intermit Before you contact the Service refer to tently at the same time to show an the information that follows for a solution alarm code to the problem Alarm code Problem e The indicator of the set programme The appliance does not fill with water flashes continuously e The end indicator flashes 1 time in termittently The indicator of the set programme The appliance does not drain the water flashes continuously e The end indicator flashes 2 times in termittently e The indicator of the set programme The anti flood device is on flashes continuously e The end indicator flashes 3 times in termittently WARNING Deactivate the appliance before you do the checks Downloaded from DishWasher Manual com Manuals 14 wwweelectrolux com Problem You cannot activate the appli ance Possible solution Make sure that the mains plug is connected to the mains socket Make sure that there is no
10. appliance is installed below and adjacent to safe structures 1 3 Use Electrical connection e This appliance is intended to be used in household and similar applications such WARNING as nie cr Me ane SeGuicel NOE Staff kitchen areas in shops offices e The appliance must be earthed and other working environments e Make sure that the electrical information J kart mouses on the rating plate agrees with the pow By clients In hotels motels and other er supply If not contact an electrician residential type environments Downloaded from DishWasher Manual com Manuals 4 www electrolux com Bed and breakfast type environ ments WARNING Risk of injury burns electrical shock or fire Do not change the specification of this appliance Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position Do not keep the appliance door open without supervision to prevent to fall on it Do not sit or stand on the open door Dishwasher detergents are dangerous Obey the safety instructions on the de tergent packaging Do not drink and play with the water in the appliance Do not remove the dishes from the ap pliance until the programme is comple ted There can be detergent on the dishes e The appliance can release hot steam if you open the door while a programme operates e Do not put flammable products or items that are wet with flammable products in ne
11. ar or on the appliance e Do not use water spray and steam to clean the appliance 1 4 Disposal WARNING Risk of injury or suffocation e Disconnect the appliance from the mains supply e Cut off the mains cable and discard it e Remove the door catch to prevent chil dren and pets to get closed in the ap pliance 2 PRODUCT DESCRIPTION Upper spray arm Lower spray arm Filters Ratin Download Fatt Salt container g Water hardness dial Rinse aid dispenser 2 Detergent dispenser plate 1sh Washer Manual com Manua ENGLISH 5 Cutlery basket e When the programme is completed the Lower basket green light comes on e When the appliance has a malfunction Upper basket the red light flashes pn The Beam on Floor goes off 2 1 Beam on Floor when the appliance is deactiva The Beam on Floor is a light that shows ted on the floor below the appliance door e When the programme starts to operate the red light comes on and stays on for all the duration of the programme 3 CONTROL PANEL 0 seo On off button Indicators Programme buttons Function buttons Delay button Indicators Description Sf Salt indicator This indicator is off while the programme operates Multitab indicator gt End indicator 4 PROGRAMMES Pro Degree of Programme Dura Energy Water gramme soil phases tion kWh I 1 Type of load min 45 All Prewash 90 160 0 9 1 7 8 17
12. ent residues on the tableware we recommend that you use the tablets with long programmes ENGLISH 11 ance after some minutes This helps to decrease the energy con sumption Important e Let the dishes become cold before you remove them from the appliance Hot dishes can be easily damaged e First remove the items from the lower basket then from the upper basket e There can be water on the sides and on the door of the appliance Stainless steel becomes cool more quickly than the dishes Do not use more than the correct quantity of detergent Refer to the instructions on the detergent packaging 8 3 Loading the baskets Refer to the supplied leaflet with examples of the load of the bas kets e Only use the appliance to wash items that are dishwasher safe e Do not put in the appliance items made of wood horn aluminium pewter and copper e Do not put in the appliance items that can absorb water sponges household cloths e Remove remaining food from the items e To remove easily remaining burned food soak pots and pans in water be fore you put them in the appliance e Put hollow items cups glasses and pans with the opening down e Make sure that cutlery and dishes do not bond together Mix spoons with other cutlery e Make sure that glasses do not touch other glasses e Put the small items in the cutlery bas ket e Put the light items in the upper basket Downloaded from Dish
13. er Manual com Manuals Make sure that there is detergent in the detergent dispenser before you start a new programme At the end of the programme When the programme is completed an intermittent acoustic signal operates and the end indicator comes on 1 Press the on off button to deactivate the appliance 2 Close the water tap Q If you do not press the on off but ton the Auto Off function auto matically deactivates the appli 8 HINTS AND TIPS 8 1 The water softener Hard water contains a high quantity of minerals that can cause damage to the appliance and bad washing results The water softener neutralises these minerals The dishwasher salt keeps the water soft ener clean and in good conditions It is important to set the right level of the water softener This makes sure that the water softener uses the correct quantity of dish washer salt and water 8 2 Using salt rinse aid and detergent Only use salt rinse aid and detergent for dishwasher Other products can cause damage to the appliance The rinse aid helps during the last rins ing phase to dry the dishes without streaks and stains Combi detergent tablets contain deter gent rinse aid and other added agents Be sure that these tablets are applica ble to the water hardness in your area Refer to the instructions on the packag ing of the products Detergent tablets do not fully dissolve with short programmes To prevent de terg
14. essories Consumables and Original spare parts for your appliance w www electrolux com shop CUSTOMER CARE AND SERVICE We recommend the use of original spare parts When contacting Service ensure that you have the following data available The information can be found on the rating plate Model PNC Serial Number A Warning Caution Safety information i General information and tips ws Environmental information Subject to change without notice Downloaded from DishWasher Manual com Manuals ENGLISH 3 1 A SAFETY INSTRUCTIONS Before the installation and use of the ap e Always use a correctly installed shock pliance carefully read the supplied in proof socket structions The manufacturer is not re Do not use multi plug adapters and ex sponsible if an incorrect installation and tension cables use causes injuries and damages Always keep the instructions with the appliance for future reference e Make sure not to cause damage to the mains plug and to the mains cable Should the appliance power supply ca ble need to be replaced this must be 1 1 Children and vulnerable carried out by our Service Centre people safety e Connect the mains plug to the mains socket only at the end of the installa WARNING oo gue tion Make sure that there is access to Risk of suffocation injury or per the mains plug after the installation manent disability e Do not pull the mains cable to discon nect the appliance
15. lashes level 5 4 Press function button A again and again to change the setting Each time The number of flashes of the end indicator and the number of the acoustic signals show the level of the water softener 3 Press function button A e The indicators of function buttons you press function button A you go B and C go off to the next level e The indicator of function button A 5 Deactivate the appliance to confirm continues to flash the setting e Intermittent acoustic signals operate and the end indicator flashes show Downloaded from DishWasher Manual com Manuals ENGLISH 9 6 2 Filling the salt container 1 Turn the cap counterclockwise and open the salt container 2 Put litre of water in the salt contain er only for the first time 3 Fill the salt container with dishwasher salt 4 Remove the salt around the opening of the salt container 5 Turn the cap clockwise to close the salt container CAUTION Water and salt can come out from the salt container when you fill it Risk of corrosion To prevent it after you fill the salt container start a programme 1 Press the release button D to open A Pe the lid C 2 Fill the rinse aid dispenser A no more than the mark max 3 Remove the spilled rinse aid with an absorbent cloth to prevent too much foam 4 Close the lid Make sure that the re lease button locks into position
16. n buttons B and C at the same time until the appli ance is in setting mode Starting a programme without delay start 1 Open the water tap 2 Press the on off button to activate the appliance Make sure that the appli ance is in setting mode 3 Press the button of the programme you want to set e The related programme indicator stays on e All the other programme indicators go off 4 Close the appliance door The pro gramme starts Starting a programme with delay start et th 2 Press the delay button again and again until the indicator of the number of hours you want to set comes on You can set 3 6 or 9 hours e The delay indicator comes on 3 Close the appliance door The count down starts When the countdown is completed the programme starts Opening the door while the appliance operates If you open the door the appliance stops When you close the door the appliance continues from the point of interruption Cancelling the delay start while the countdown operates Press and hold function buttons B and C at the same time until the delay indica tor goes off and all the programme indica tors come on i When you cancel a delay start the appliance goes back to setting mode You have to set the pro gramme again Cancelling the programme Press and hold function buttons B and C at the same time until all the pro gramme indicators come on Downloaded ou Desh Wash
17. nce Start a programme to re move them Do not use detergent and do not load the baskets Water softener adjustment German French mmol l Clarke Manual Elec degrees degrees degrees tronic dH fH Sil O 91 125 9 1 12 5 64 88 2 1 10 Downloaded from DishWasher Manual com Manuals 8 www electrolux com Water hardness RL On ML adjustment German French mmol l Clarke Manual Elec degrees degrees degrees tronic dH fH 43 50 76 90 7 6 9 0 53 63 21 9 37 42 65 75 6 5 7 5 46 52 21 8 29 36 51 64 5 1 6 4 36 45 21 i 23 28 40 50 4 0 5 0 28 35 21 6 19 22 33 39 3 3 3 9 23 27 21 51 15 18 26 32 2 6 3 2 18 22 1 4 11 14 19 25 1 9 2 5 13 17 1 3 4 10 7 18 0 7 1 8 5 12 a7 OV E A A 1 Factory position 2 Do not use salt at this level You must adjust the water soften er manually and electronically Manual adjustment Turn the water hardness dial to the posi tion 1 or 2 Electronic adjustment ing the current setting of the water softener 1 Press the on off button to activate the appliance Make sure that the appli ance is in setting mode refer to Set ting and starting a programme 2 Press and hold function buttons B a and C at the same time until the indi E g 5 acoustic signals and 5 flashes pause 5 acoustic sig cators of function buttons A B and 2 C start to flash nals and 5 f
18. t a damaged fuse in the fuse box The programme does not start Make sure that the appliance door is closed If the delay start is set cancel the setting or wait for the end of the countdown The appliance does not fill with water Make sure that the water tap is open Make sure that the pressure of the water sup ply is not too low For this information con tact your local water authority Make sure that the water tap is not clogged The appliance does not drain the water Make sure that the filter in the inlet hose is not clogged Make sure that the inlet hose has no kinks or bends Make sure that the sink spigot is not clogged The anti flood device is on Make sure that the drain hose has no kinks or bends Close the water tap and contact the Service After the checks are completed activate the appliance The programme continues from the point of interruption If the problem occurs again contact the Service If other alarm codes appear contact the Service 10 1 If the washing and drying results are not satisfactory Whitish streaks or bluish layers on glasses and dishes e The released quantity of rinse aid is too much Adjust the rinse aid selector to a lower position e The quantity of detergent is too much Stains and dry water drops on glasses and dishes e The released quantity of rinse aid is not sufficient Adjust the rinse aid selector to a higher position
19. wn the product number PNC that is on the rating plate 5 OPTIONS 5 1 Multitab 2 Make sure that the appliance is in set ting mode refer to Setting and start ing a programme Activate this option only when you use the 3 Press and hold function buttons D combi detergent tablets and E at the same time until the mul This option deactivates the flow of rinse titab indicator comes on aid and salt The salt indicator stays off g The programme duration can increase Hibs stop to ee pera 1 Press the on off button to activate the eterg nt tablets before YOU start to use separately detergent rinse aid and dishwasher salt do these steps 1 Set the water softener to the highest Downloaded from DishWasher Manual com Manuals SVS appliance 2 Make sure that the salt container and the rinse aid dispenser are full 3 Start the shortest programme with a rinsing phase without detergent and without dishes 4 Adjust the water softener to the water hardness in your area 5 Adjust the released quantity of rinse aid 5 2 Acoustic signals The acoustic signals operate in these conditions e The programme is completed e The level of the water softener is adjus ted electronically e The appliance has a malfunction i Factory setting On It is possible to deactivate the acoustic signals How to deactivate the acoustic signals 1 Press the on off button to activate the appliance Make
Download Pdf Manuals
Related Search