USER MANUAL
Contents
1. Q can t find the drive under my computer why A Please make sure your new hard disk has been partitioned Q After plugging the USB port the drive is not spinning at all why A The USB cable doesn t connect successfully Q After installing the drive Why it is still recognized as Unknown device A This means the driver installation is not successful please install the driver one more time Q Can use external USB hub A Yes USB hub works in the same way as the computer USB ports Q My computer doesn t have USB 3 0 port Can use USB 3 0 host adaptor A USB 3 0 host adapter works in the same way as the built in USB ports 8 0 The Safe Usage Guides O cleanliness Wiping with the soft cloth don t use solvent like benzene or alcohol O The energy consumption When the dock is in standby state it is still connects with the power which still keeps consuming electricity Please cut off the machine and the power and pull out the power plug from the electric outlet O Avoid heat damp water and dust Don t expose the player in damp rain sand ground or high temperature environment heat equipments or under the sun light Avoid the problem of expand with heat and contract with cold When the player suddenly moves from the cold environment to the warm environment machine surface and inner part may have water fog bead so please doesn t play the machine and let the player in the warm environment until humi2. 1 9 2 10 1 5 10 2 10 3 or above Active USB port 4 0 PACKAGE CONTENTS e GDPD1T HDD Docking Station Power Adapter User manual e USB 3 0 cable 5 0 Hardware Setup as HDD B Target lt gt 5 ODA Mil Source CLONE button Device Mode USB3 0 to SATA External Dual Hard Drive e Install your SATA hard drive properly to the port connector on the docking station Connect the docking station to your computer by USB cable e Connect the power adapter to the enclosure and power up the docking station The computer should now detect the new hardware For Windows2000 XP VISTA 7 8 no driver setup is necessary Please Proceed to step 6 0 to format your drive Duplication Mode Install 2 hard drives into the dock Make sure to place the drive with the data you want copied Source into the Source bay The target disk Target should be equal or larger in capacity than the source disk Connect the power adapter to the enclosure and press the POWER button to power up the docking station e After about 10 seconds Keep pushing the CLONE button for 3 seconds to begin duplication Clone Progress indicator 25 50 75 and 100 4 status Would be acted Show as below LED Status Silkscreen 25 50 75 100 LED Color Green Red Yellow Orange Solid LED for every 25 done Duplication sta
3. GODO USER MANUAL GDPD01T 2 5 3 5 Dual SATA HDD Docking Station 1 0 INTRODUCTION The GDPDO1T Dual SATA Hard Drive Dock Stand Alone Duplicator is a versatile practical unit that functions as both a hard drive dock and stand alone HDD duplicator This device supports SATA 2 5 inch and SATA 3 5 inch hard drives up to 1TB and 4TB respectively It also features the LED progress indicator One Touch Backup or Duplicate button lt is also designed with a straightforward uncomplicated USB 3 0 plug and play interface The GDPDO1T is compatible with Windows 8 7 Vista XP 2000 Mac and Linux operating systems Please read this manual carefully before using this device 2 0 FEATURES SPECIFICATIONS e Supports All 2 5 inch amp 3 5 inch SATAI II HDDs up to 1TB 4TB or more e Standable Convenient and Trendy Design e Support USB 3 0 super speed 5Gbps Complies with USB 2 0 hight speed 480Mbps USB 1 1 12Mbps USB 1 0 1 5Mbps Easy installation plug 8 play and hot swappable LED progress indicator e Supports One Touch Backup or Duplicate e Functions as a stand alone HDD duplicator Delivers a 1 to 1 clone equal to or greater in size than original Dimensions 126 5mm L x 114 5mm W x 83mm H 3 0 SYSTEM REQUIREMENT PC Requirements Minimum Intel Processor Pentium II 50MHz 64MB RAM e Windows 2000 XP VISTA 7 8 e Active USB port MAC Requirements Minimum Apple G processor 64MB RAM Mac OS 9
4. dity evaporation O Don t obstruct ventilation Don t operate the player inside the close box or cabinet please make sure there is t 10cm 4 inches around for well ventilated space
5. rted incrementally Duplication in progress LED moving back and forth Duplication Complete All LED remain constantly on Note 1 Can t connect the docking station to your computer by USB cable for duplicator mode 2 Acloned drive also takes over the disk ID from the master drive This causes Windows 7 and Vista to shut down one of the drives if both drives are placed into the HDD docking after cloning The disk can be switched online again in the windows option Disk Management 6 0 Format your Hard Drive If the drive already appears in My Computer Please skip to 6 2 6 1 For an un partitioned or un formatted new drive it normally does not automatically appear in My Computer the first time Please follow these steps Windows 2000 XP VISTA 7 8 Right key of Mouse beat My computer Choose Manager choose disk manager of the list The operating interface will show on the computer Subarea Format following the operating interface Attention About Windows2000 XP VISTA 7 8 Please choose NTFS Format When the capacity is blow 32GD You can choose FAT32 format 6 2 Go to My Computer locate the removable disk right click on it and select format from the drop down list follow the instructions to complete the formatting process Note By this method to format your drive it will result in a single partition in largest drive capacity which is also highly recommended 7 0 FAQs
Download Pdf Manuals
Related Search