SideKick STORM Kit - All
Contents
1. Turn on the Master Switch O and press the Key Switch D once to see the battery Indicator Others The customer is requested to contact us in advance if the customer needs other applications or operating conditions than those described in this document Additional experimentation may be required to verify performance and safety under such conditions Safety And Maintenance Do not expose the product to fire or close to high temperature Do not expose the product to water or high humidity The best using temperature is between 10 C 45C 45 C oc 10 C S Do not try to short circuit aw Stop using if found liquid leakage overheating or any other unusual conditions S A Green using power Great recycle 282. TENERGY SideKick STORM Kit Weather Resistant Portable LiFePO4 Power Bank Specification Output port 19V 16V 12V USB port 5V 2A Charge mode CC CA 15V 1A Jump Start current gt 200A Peak current 400A lt 3S Fully charge time 2 3 hours Operating temperature 20 C 85 C Dimension 165 x 79 x 40 mm Includes e Tenergy Sidekick Storm Power Bank e Jumper Cables with battery clamps e Car charger e 110 240V wall outlet adaptor e Laptop adapter with changeable tips e USB to Micro USB cable e Carrying Bag e User Manual Product Diagram LED Flashlight 19V LED Light 16V LED Light 12V LED Light output Battery Indicator Key Switch for Flashlight and Voltage Changes USB Output 5V 2A Charging Port 15V 1A Master Switch ON OFF D Jump Start Socket To Start Your Car To start your car please make sure the Storm Power Bank is pre charged at least 20 then connect red clip to the car battery positive and black clip to the car battery negative Inserting the plug into the Jump Start Socket of the power bank Turn on the Power bank and then turn the ignition switch to START position Once the car is started please disconnect the plug and remove the battery clips immediately Red clamp connect Black clamp connect then disconnect the jumper cable After connecting the jumper cable turn on the power bank Remove the c
3. lamps from the battery To Charge A Laptop 1 Before charging turn on the Master Switch and press the Key Switch to select proper voltage 19V 16V for charging a laptop You should notice the voltage LED indicators pare switching as press each time 2 Select a laptop connector that corresponds to your laptop using it to connect the DC power wire to the input port of the laptop Plug the other end of the DC power wire into the Power bank 3 Charging should starts automatically To Charge Other Devices mobile phone amp tablet 1 Before charging turn the Master Switch on and press the Key Switch lightly You should notice the USB indicator light up 2 Connect the Power Bank to your device mobile phone or tablet with a USB charging cable 3 Charging should starts automatically To Recharge The Storm Power Bank Charging through an AC outlet Using the wall plug charger to connect the Power Bank 15V charging port and an AC outlet and charging should starts automatically Charging through a car s power outlet Using the car charger to connect the Power Bank 15V charging port and a car s power outlet and charging should starts automatically To Use It As A Flashlight Turn on the master switch O and press and hold the Key Switch 7 for 3 seconds to start the flashlight function Press D once again to switch the lighting modes Light On stable gt Intermittent gt OFF To Check Battery Capacity
Download Pdf Manuals
Related Search