PE-9303 – Wireless to Wired Convertor User Manual
Contents
1. User Manual Installation Guide PE 9303 Wireless to Wired Convertor User Manual PE 9303 convert wireless signal to wired signal and it can convert signal for max 8 wireless devices Please code the wireless device to the repeater before using Features can code max 8 wireless device wireless transmit frequency 4833MHz work voltage 11 5 15 5V work current 33 39MA included 12V 1000mA external power adapter dimension is 167 112 40mm ivory white color oe eS hy Installation Open Cover 1 Open the cover 2 Remove the PCB board 3 Put the base cover on the wall and point out where to drill hole Buckle to Screw hole install PCB Screw hole for screws Remove the base cover and drill holes on the wall 5 Put the base cover to the wall let the wire of the device which will connect to the convertor through the wire outlet hole and connect it to the convertor 6 Fix the base cover on the wall by screws Install the PCB back 8 Cover the front cover Wire let in hole Coding Method Connect the power press the switch of each zone and then trigger the wireless device the LED according to the zone will No 1 LED light off for 5 seconds Then coding successfully For example coding the wireless device to No 1 zone press the No 1 switch then trigger the wireless device the red No 1 LED will be off for 5 seconds this means coding successfully Delete Coding Method If you need to recode another wir2. eless device to a zone which had coded with a wireless device already you need to delete the coding first Operation as below press and hold the switch of the zone which you want to delete coding and then press CLR switch then yellow LED will normally on then delete coding successfully Transmitting wireless signal Trigger the wireless device which had coded to the convertor the LED of the zone will light off for 5 seconds and the relay output terminal of the zone will open for 5 seconds For example a wireless detector has coded to No 3 1 User Manual Installation Guide zone when trigger the detector No 8 LED will turn off for 5 seconds the wired output terminal will open for 5 seconds Inside configuration 2 sets screws with countersink heads Warning we are not responsible for the problem caused by improper operation or change the product configuration it may lose the authority of product warranty
Download Pdf Manuals
Related Search