Home

R157-E1-02 - Products

1. The Jump to Connection Monitor Button is clicked to close the dialog box and jump to the Monitoring Connection Tab Page 2 4 4 SYSMAC Gateway Service If the configuration device is set to Local SYSMAC Gateway you can manage the SYSMAC Gateway Service In other cases the Start Button the Stop Button and other features are disabled 2 4 5 Device Information Area The Device Information Area displays the device information for the device that is currently being set or monitored Ethernet IP Monitor Tool Operation Manual R157 2 5 Setting Tab Page The Setting Tab Page is shown below Main Setting Monitoring Producer Consumer Message User Define Local Network Port Remote Network Port NIC Name IP Address NODE Name Local NIC Port IP Address a Local 2 192 168 250 1 Logging Configuration Communication Log Data Log Output Folder a Output Folder C Documents and Settings Administratons C Enable Log Output Enable Data Log Delete Int 1Da 1Week 1Month Custom 1day O O O Coa Edit Data Logging Parameters et Clear ConnectiDisconnect Counter Upload Download Verify Reset The following operations can be performed from the Setting Tab Page Basic This tab page is for port settings and logging configuration of local and remote networks Producer This tab page is used to set produce tags Consumer This tab page is used to se
2. Microsoft Windows XP Service Pack 3 or higher 32 bit edition Microsoft Windows Vista Microsoft Windows 7 Computer A personal computer with the processor that is recommended by Microsoft Corporation Memory The memory capacity that is recommended by Microsoft Corporation Hard disk Approx 20 MB or more of available hard disk space is required Display XGA 1 024 x 768 High Color 16 bit or higher Disk drive CD ROM or DVD ROM drive Communications port Ethernet port Ethernet IP Monitor Tool Operation Manual R157 e Installation Procedure Execute the EtherNet IP Monitor Tool setup program and install the software according to the instructions that are displayed There are setup programs available for both English and Japanese Select the setup program for the language to use By default the EtherNet IP Monitor Tool is installed in the following directory C Program Files OMRON EtherNetIP Monitor Tool OMRON EtherNetIP Monitor Tool is also registered on the Windows Start Menu e Uninstallation Procedure Select and delete the EtherNet IP Monitor Tool from Add or Remove Programs or Programs and Features in the Control Panel Ethernet IP Monitor Tool Operation Manual R157 2 Function Specifications 2 1 Main Window The Main Window of the EtherNet IP Monitor Tool is shown below GE EtherNet IP Monitor Tool Untitled ME DEW s2 File View Help Configuration Device
3. Local SYSMAC Gateway Rev 2 Monitoring Mi Network Status Local IP Address CIP Status Local 192 168 250 150 2 Open SYSMAC Gateway Service Status Running Start up Type Auto Iv Connection Status Tag Type Total Count OK Count D Producer 0 D Consumer 0 D UCMM 0 OClass3 0 Device Information Vendor OMRON Corporation Device Type Communications Adapter Product Code 1633 Product Name SYSMAC Gateway Revision 2 01 Address The Main Window is made up of the three following main tab pages Main This tab page displays tables of the active status and connection status of the devices NICs that are set on the Setting Tab Page It is also used to start and stop communications services for devices that are local SYSMAC Gateways Setting This tab page is used to register EtherNet IP connections and produce consume tags consume tags Monitoring This tab page is used to monitor the connection status of produce and 10 Ethernet IP Monitor Tool Operation Manual R157 2 2 Menu Commands You can execute the following functions with the menu commands File New Creates a project File Open Opens an existing project File Save Saves the project File Save As Saves the project under a specified name You can select to save either an EtherNet IP Monitor Tool project file or a device configuration file dvf for use with the Network Confi
4. Output Folder This box is used to specify the folder where the communications log is stored A new file is output every day and every hour Example The output file for 23 15 on August 12 2011 is SgwComLog 2011 08 12 23 txt Enable Log Output This check box is used to enable outputting a communications log The default is the previous setting If there is no previous setting the default is to disable outputting the log Delete Int The Set Button is used to specify the interval between deletions of communications log files Data is all maintained only for the specified maximum number of days including that day All other data is deleted Data Log Output Folder This box is used to specify the folder where the data log is stored Enable Data Log This check box is used to enable data log output The default is the previous setting If there is no previous setting the default is to disable outputting the log Edit Data Logging Parameters This button is used to edit data logging parameters The Browse Buttons that are next to the input boxes are clicked to select an existing folder as the log output folder The following items are output as a communications log Forward Open Close Class 1 forward open close information is output Service Start Stop Information on starting and stopping the SYSMAC Gateway service is output Download Start Stop Information on starting a
5. Operation is normal P The connection is not established or an error occurred Size This column displays the tag size The size is displayed in bytes Connection Time The total connected time for the tag is displayed The time is displayed in milliseconds Disconnection Time The total disconnected time for the tag is displayed The time is displayed in milliseconds Destination IP Address The destination IP address is displayed The destination addresses are displayed if it is a multicast connection Related Producer List The following information on related producers is displayed basically 1 Produce Tag Name The related producer tag name is displayed Remote IP Address The IP Address of the related producer is displayed O gt T RPI The O gt T RPI is displayed The time is displayed in milliseconds T gt O RPI The T gt O RPI is displayed The time is displayed in milliseconds O gt T Timeout The O gt T timeout time is displayed The time is displayed in milliseconds T gt O Timeout The T gt O timeout time is displayed The time is displayed in milliseconds O gt T API The O gt T API is displayed The time is displayed in milliseconds T gt O API The T gt O API is displayed The time is displayed in milliseconds O gt T Connection ID The O gt T connection ID is displayed as a hexadecimal value T gt O Connection ID The T gt O connection ID is displayed as a hexadecimal value Ethernet IP Monitor Tool Operation Manual
6. Specifies the contents of the user definitions Set to a value between 1 and the value that you set for UserDef Name Specifies the user definition name Size Specifies the user definition size in bytes MemberCount Specifies the number of members Member Specifies the member information Set to a value between 1 and the value that you set for MemberCount in UserDef The following format is used for the above member information Fields are delineated by commas 1 Name Specifies the member name 2 Type Specifies the data type of the member You can set any of the following text strings BIT BYTE WORD DWORD STRUCT 3 Unit Number of data elements 4 ChildDefineName If you set the data type to STRUCT specify the name of the user definition to use For other data types omit this field Example UserDef Count 2 UserDef1 Name SampleDefine Size 10 MemberCount 2 Member1 Data1 WORD 1 Member2 Data2 DWORD 2 UserDef2 Name SampleDefine2 Size 12 MemberCount 2 Member1 Data1 WORD 1 Member2 Data2 STRUCT 1 SampleDefine Ethernet IP Monitor Tool Operation Manual R157 2 5 5 2 Creating and Deleting User Definitions To create a new user definition click the New Button next to the user definition name The Create User Define Dialog Box is shown below Create User Define Define Name Size 4 Byte The follo
7. can be selected from BYTE WORD or DWORD default HEX This option displays the tag data in hexadecimal in units of the specified data type Examples for data of 0x12345678 Display type BYTE 78563412 Display type WORD 5678 1234 Display type DWORD 12345678 DEC This option displays the tag data in decimal in units of the specified data type Examples for data of 0x12345678 Display type BYTE 120 86 52 18 Display type WORD 22136 4660 Display type DWORD 305419896 BIN This option displays the tag data in binary in units of the specified data type Examples for data of 0x01020304 Display type BYTE 00000100 00000011 00000010 00000001 Display type WORD 0000001100000100 0000000100000010 Display type DWORD 00000001000000100000001 100000100 ASCII This option displays tag data by byte in ASCII Example for data of 0x31323334 4321 ASCII SWAP This option swaps the bytes in tag data to display the data by WORD in ASCII Example for data of 0x31323334 3412 To use user definitions for the tag data display format select the User Define Check Box Data is displayed in the user defined format that is specified for each tag The display format for each configuration member is shown below Bit The data is displayed as TRUE or FALSE Not bit The tag data is displayed with the display format that is shown above for each unit that is defined in the user definitions Etherne
8. in the Tag List Area is monitored The monitoring cycle for tag data is the same as the cycle for checking the status of the tags i e 500 ms You can select one of the following display formats for the tag data If the display format is HEX DEC or BIN the display type can be selected from BYTE WORD or DWORD default HEX This option displays the tag data in hexadecimal in units of the specified data type Examples for data of 0x12345678 Display type BYTE 78563412 Display type WORD 5678 1234 Display type DWORD 12345678 DEC This option displays the tag data in decimal in units of the specified data type Examples for data of 0x12345678 Display type BYTE 120 86 52 18 Display type WORD 22136 4660 Display type DWORD 305419896 BIN This option displays the tag data in binary in units of the specified data type Examples for data of 0x01020304 Display type BYTE 00000100 00000011 00000010 00000001 Display type WORD 0000001100000100 0000000100000010 Display type DWORD 00000001000000100000001 100000100 ASCII This option displays tag data by byte in ASCII Example for data of 0x31323334 4321 ASCII SWAP This option swaps the bytes in tag data to display the data by WORD in ASCII Example for data of 0x31323334 3412 To use user definitions for the tag data display format select the User Define Check Box Data is displayed in the user defined format that is specified for each ta
9. on produce tags and consume tags Data Log This tab page is used to control data logging and to display data logs If devices or device versions that are not supported are connected will be displayed for the monitored data Ethernet IP Monitor Tool Operation Manual R157 2 6 1 Producer Tab Page 2 6 1 1 Monitoring Tag Status The Producer Tab Page is used to monitor the following data for all produce tags Status The following icons are displayed next to the tag name to indicate the connection status D Offline F Operation is normal P The connection is not established or an error occurred Size This column displays the tag size Target IP This column displays the IP address of the target The multicast addresses are displayed for a multicast connection Connection ID This column displays the connection ID The cycle for checking the status of the tags is 500 ms Ethernet IP Monitor Tool Operation Manual R157 37 38 2 6 1 2 Monitoring Tag Data The data of the tag that is selected with the cursor in the Tag List Area is monitored The monitoring cycle for tag data is the same as the cycle for checking the status of the tags i e 500 ms You can select one of the following display formats for the tag data If the display format is HEX DEC or BIN the display type can be selected from BYTE WORD or DWORD default HEX This option displays the tag
10. the consumer is displayed The time is displayed in milliseconds Disconnection Time The total disconnected time for the consumer is displayed The time is displayed in milliseconds Destination IP Address The destination IP address is displayed The destination multicast addresses are displayed if it is a multicast connection O gt T RPI The O gt T RPI is displayed The time is displayed in milliseconds T gt O RPI The T gt O RPI is displayed The time is displayed in milliseconds O gt T Timeout The O gt T timeout time is displayed The time is displayed in milliseconds T gt O Timeout The T gt O timeout time is displayed The time is displayed in milliseconds O gt T API The O gt T API is displayed The time is displayed in milliseconds T gt O API The T gt O API is displayed The time is displayed in milliseconds O gt T Connection ID The O gt T connection ID is displayed as a hexadecimal value T gt O Connection ID The T gt O connection ID is displayed as a hexadecimal value Ethernet IP Monitor Tool Operation Manual R157 2 6 4 2 Consumer List The Consumer List Area is used to monitor the following items for each tag Inactive tags are not monitored Tag Name The name of the consume tag is displayed The following icons are displayed next to the tag name to indicate the connection status D Offline
11. Dev1 Tag4 The tags that are specified on this tab page are registered only as normal tags They are not registered as class 1 tags The New Button is clicked to display the following dialog box to set a tag Edit Message Tag X Tag Name Size 2 Byte Connect Type UCMM v Remote Node Dev1 iv Remote Tag Name User Define iv Ethernet IP Monitor Tool Operation Manual R157 29 30 Tag Name This box is used to set the tag names The characters that can be input and the number of bytes of characters that can be input depend on the configuration device Size This box is used to specify the tag size The supported size settings depend on the configuration device Connect Type Use this box to specify the connection type UCMM or class 3 Remote Node This box is used to specify the remote node to which the connection is established Remote Tag Name This box is used to specify the produce tag of the remote node to which the connection is established User Define This box is used to specify the user defined tag data displays To edit settings for existing ports the Edit Button is clicked after selecting the setting to edit or the setting is double clicked The same dialog box as for creating a new port is displayed and can be edited To delete an existing port the Delete Button is clicked after selecting the settings The settings are delet
12. E 11 2 4 Main Tabb Page eee aet aD in E eventos 12 2 4 1 Setting the Configuration Device sssenn nnm 13 2 4 2 Network Status Areaan keniana tanne anainn a nnn nnne 14 2 4 3 Connection Status Alea 3 tbe em be PEERS RERO 15 2 4 4 SYSMAC Gateway Service sssssssssssssssssseseeeenene ener enne nns 16 2 4 5 Device Information Area een ien ne ep epis 16 2 5 Setting Tab Page iie eio ee t Pao ns 17 2 0 Basie Tab Page E 18 2 5 2 Producer Tab Page wai cicciccscccsesces seeds cesceseverwidceesceuceedavsniecedeccdssdateneedecesceavvastoeeedes 25 2 5 3 Consumer Tab Page ssssssssseeeeeeemenenen eee emere 27 2 5 4 Message Tab Page n esee citet ente it etae sereni e rk eee eie aA ofeenes 29 2 5 5 User Define Tab Page sessssssessseeeeeeee eee 31 2 6 Monitoring Tab Page oe er ene nerui aaa a iaa n a KAEA aa iuas anaoat 36 2 6 1 Producer Tab Page wii eric teret enne re aereo rade eee anus 37 2 6 2 Consumer Tab Page sse eene eren 39 2 6 3 Message Tab Page unen tet i tentes eara sen eer eto raa aaa ie iua oteetes 41 2 6 4 Connection Tab Page sssssssseeeeeeeee eene eene n nennen nennen 43 2 6 5 Data Log Tab tenere eher deed u edecusdecestsndvcees 46 Ethernet IP Monitor Tool Operation Manual R157 1 Read and Understand this Manual Please read and understand this manual before using the product Please consul
13. NCE MANUAL Support Software Man No Model numbers Manual name W463 CXONE ALLTIC VA CX One FA Integrated Tool Package SETUP MANUAL W446 CXONE ALLTID V4 CX Programmer Ver 9 0 OPERATION MANUAL W447 CX Programmer Ver 9 0 OPERATION MANUAL Function Blocks Structured Text W469 CX Programmer Ver 9 1 Operation Manual SFC Programming W366 CX Simulator Ver 1 9 OPERATION MANUAL W464 CX Integrator Ver 2 0 OPERATION MANUAL W344 CX Protocol Ver 1 9 OPERATION MANUAL W433 CX Position Ver 2 5 OPERATION MANUAL W436 CX Motion NCF Ver 1 9 OPERATION MANUAL W448 CX Motion MCH OPERATION MANUAL Ethernet IP Monitor Tool Operation Manual R157 5 1 The EtherNet IP Monitor Tool e The EtherNet IP Monitor Tool The EtherNet IP Monitor Tool is a software application for monitoring the communications status of CS CJ series EtherNet IP Units and SYSMAC Gateway EtherNet IP and for setting connections for tag data links If the configuration device is a SYSMAC Gateway you can specify local devices on the same computer or remote devices on other computers The system configuration supported by the EtherNet IP Monitor Tool is shown below These devices can be set and monitored These devices can be set and monitored These devices can be set and monitored 6 Ethernet IP Monitor Tool Operation Manual R157 e EtherNet IP Monitor Tool Functions The func
14. NG THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user s programming of a programmable product or any consequence thereof Ethernet IP Monitor Tool Operation Manual R157 3 Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons It is our practice to change model numbers when published ratings or features are changed or when significant construction changes are made However some specifications of the products may be changed without any notice When in doubt special model numbers may be assigned to fix or establish key specifications for your application on your request Please consult with your OMRON representative at any time to confirm actual specifications of purchased products DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes even when tolerances are shown PERFORMANCE DATA Performance data given in this manual is provided as a guide for the user in determining suitability and does not constitute a warranty It may represent the result of OMRON s test conditions and the users must correlate it to actual application requirements Actua
15. OMRON EtherNet IP Monitor Tool Operation Manual Introduction This manual documents the operating procedures of the EtherNet IP Monitor Tool It does not contain other information such as precautions In actual use obtain the operation manuals of the relevant CPU Units EtherNet IP Units and Support Software read the required application information including all precautions and adequately check operation before you use the EtherNet IP Monitor Tool Trademarks e EtherNet IP is a registered trademark of the ODVA Open DeviceNet Vendor Association e Windows Windows XP Windows Vista and Windows 7 are registered trademarks of Microsoft Corporation in the USA and other countries e Other company names and product names in this document are the trademarks or registered trademarks of their respective companies Ethernet IP Monitor Tool Operation Manual R157 Ethernet IP Monitor Tool Operation Manual R157 Table of Contents Table of Contents escas se rer rere ccn ice cO RO e E ER 1 Read and Understand this Manual eese 2 Related lr e r r H T 5 1 TheEtherNet IP Monitor Tool eeeeeeeeeeeeeeeeeeee nennen 6 2 Function Specifications iE XR REDUNEREREDUYRERERUREEANERA ERR RRRE 10 RW Mai WINDOW cued 10 2 2 Men Commands zoe a eee APR IET e dedere DE ee RY 11 2 3 AOOIDA inc Sais lect E
16. R157 45 2 6 5 Data Log Tab The Data Log Tab Page is used to perform logging for the tags that are specified as trigger conditions in the data logging settings The tab page is shown below Producer Consumer Connection i Stop Start Trigger Stop Trigger Cloyelie Logging Tag Data Member Tag Name Data HEX ODEC OBIN Type DWORD v Oascll O ASCII SWAP C User Define Logging is performed for operation of the following buttons on the Data Log Tab Page The maximum size of the data that is logged is the buffer size that is specified in the data logging settings Start The Start Button is clicked to start logging the specified tag The Stop Button is clicked to stop logging the specified tag If the Cyclic Check Box is selected tag data is obtained on the specified cycle Stop This button stops logging and displays the logging data in a list Start Trigger This button monitors whether the trigger condition is met when the button is clicked and starts logging the specified tag after the trigger condition is met Logging stops when the logging buffer is full This button cannot be used if the Cyclic Check Box is selected Stop Trigger Logging of the specified tag starts when this button is clicked and logging stops when the specified trigger condition is met This button cannot be used if the Cyclic Check Box is selected Cyclic This check box is used to perform logging of the specified tags at the lo
17. ations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards codes or regulations that apply to the combination of products in the customer s application or use of the products At the customer s request OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product machine system or other application or use The following are some examples of applications for which particular attention must be given This is not intended to be an exhaustive list of all possible uses of the products nor is it intended to imply that the uses listed may be suitable for the products e Outdoor use uses involving potential chemical contamination or electrical interference or conditions or uses not described in this manual e Nuclear energy control systems combustion systems railroad systems aviation systems medical equipment amusement machines vehicles safety equipment and installations subject to separate industry or government regulations e Systems machines and equipment that could present a risk to life or property Please know and observe all prohibitions of use applicable to the products NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURI
18. d as tag set names The New Button is clicked to display the following dialog box to set a tag Edit Produce Tag t3 Tag Name Size 2 Byte RPI Range Enable Disable Max RPI Min RPI Default RPI User Define Ethernet IP Monitor Tool Operation Manual R157 25 Tag Name This box is used to set the tag names The characters that can be input and the number of bytes of characters that can be input depend on the configuration device Size This box is used to specify the tag size The supported size settings depend on the configuration device RPI Range These options are used to enable or disable the RPI ranges If the Disable Option is selected values cannot be entered into the cells in the Max RPI Min RPI and Default RP Columns Max RPI This box is used to specify the maximum RPI The supported RPI ranges depend on the configuration device Min RPI This box is used to specify the minimum RPI The supported RPI ranges depend on the configuration device Default RPI This box is used to specify the default RPI The supported RPI ranges depend on the configuration device User Define This box is used to specify the user defined tag data displays To edit settings for existing ports the Edit Button is clicked after selecting the setting to edit or the setting is double clicked The same dialog box as for creating a new port is displayed and can be edited To dele
19. data in hexadecimal in units of the specified data type Examples for data of 0x12345678 Display type BYTE 7856 34 12 Display type WORD 5678 1234 Display type DWORD 12345678 DEC This option displays the tag data in decimal in units of the specified data type Examples for data of 0x12345678 Display type BYTE 120 86 52 18 Display type WORD 22136 4660 Display type DWORD 305419896 BIN This option displays the tag data in binary in units of the specified data type Examples for data of 0x01020304 Display type BYTE 00000100 00000011 00000010 00000001 Display type WORD 0000001100000100 0000000100000010 Display type DWORD 00000001000000100000001 1000001 00 ASCII This option displays tag data by byte in ASCII Example for data of 0x31323334 4321 ASCII SWAP This option swaps the bytes in tag data to display the data by WORD in ASCII Example for data of 0x31323334 3412 To use user definitions for the tag data display format select the User Define Check Box Data is displayed in the user defined format that is specified for each tag The display format for each configuration member is shown below Bit The data is displayed as TRUE or FALSE Not bit The tag data is displayed with the display format that is shown above for each unit that is defined in the user definitions Ethernet IP Monitor Tool Operation Manual R157 2 6 2 Consumer Tab Page The Consume
20. displayed in the selection list Port Type This box is used to specify the type of end point port The following types can be set 0 Default 1 RA compatible IP Address This box is used to specify the IP address of the configuration device IP addresses that have already been set cannot be specified If the Browse Button is clicked the following dialog box is displayed to browse the configuration devices and obtain the IP address The local port settings must be completed in advance when executing this operation 20 Ethernet IP Monitor Tool Operation Manual R157 Browse Network Select a device that you would like to connect Browse Device Information Vendor ID Product Name Device Type Revision Option Cancel To edit settings for existing ports the Edit Button is clicked after selecting the setting to edit or the setting is double clicked The same dialog box as for creating a new port is displayed and can be edited To delete an existing port the Delete Button is clicked after selecting the settings The settings are deleted when the Yes Button is clicked after the delete confirmation dialog box is displayed Ethernet IP Monitor Tool Operation Manual R157 21 2 5 1 3 Logging Configuration Area The following items are set in Logging Configuration Area These settings are disabled if the configuration device is set to Remote Devices Communication Log
21. e to use from the offset position for triggering logging BYTE WORD or DWORD default can be specified Mask This box is used to specify a hexadecimal value as the mask for data to use to trigger logging Match This box is used to specify a hexadecimal value as the match value for data to use to trigger logging Ethernet IP Monitor Tool Operation Manual R157 23 e Trigger Condition Area Trigger 1 OK Logging is performed if the value of the data of the specified size from the starting offset position for the tag set in the Trigger 1 Area is the same as the match value when the mask is applied Trigger 1 NG Logging is performed if the value of the data of the specified size from the starting offset position for the tag set in the Trigger 1 Area is not the same as the match value when the mask is applied Trigger 2 OK Logging is performed if the value of the data of the specified size from the starting offset position for the tag set in the Trigger 2 Area is the same as the match value when the mask is applied Trigger 2 NG Logging is performed if the value of the data of the specified size from the starting offset position for the tag set in the Trigger 2 Area is not the same as the match value when the mask is applied Multi Logging is performed for ANDs or ORs of the above conditions 2 5 1 4 Upload This button is used to upload parameters from the connected device If the configuration device
22. ed when the Yes Button is clicked after the delete confirmation dialog box is displayed Ethernet IP Monitor Tool Operation Manual R157 2 5 5 User Define Tab Page The User Define Tab Page is used to set definitions for displaying tag data The tab page is shown below Main Settin Monitoring Producer Consumer Message Define Name SampleDefine 10 Byte Edi Delet Upload f No Define Name 000 Member 001 Member2 Remained Address Edit Options Create Define File Select a user defined name list to display the user defined information 2 5 5 1 Setting User Define Options The Edit Options Button is clicked to edit the options when creating user definitions The following dialog box is displayed Edit User Define Options Default Data Type DWORD Pre Defined File CYUserDefini Default Data Type This box is used to specify the default data type when specifying the size of the user definition WORD or DWORD default can be specified Pre Defined File This box is used to specify a file containing predefined user definitions The Browse Button is clicked to specify a file The user definitions in the specified file are displayed in the user definition list by default Ethernet IP Monitor Tool Operation Manual R157 31 The format of the predefined file is given below UserDef Count Specifies the number of user definitions UserDef
23. ew Button is clicked Edit Local Network Port Port Name CIP Part No 2 Range 2 5 IPAddress 0 0 0 0 Port Name This box is used to specify the port name A maximum of 32 bytes of characters can be set CIP Port No This box is used to specify the CIP port number A value of 2 to 5 must be entered as the port number However if the SYSMAC Gateway is not multiport or if the number of supported ports is different the port number is determined by the SYSMAC Gateway specifications Port numbers that have already been set cannot be specified IP Address This box is used to specify the IP address of the port IP addresses that have already been set cannot be specified Ethernet IP Monitor Tool Operation Manual R157 If the Browse Button is clicked the following dialog box is displayed to obtain the IP address from a list of interfaces on the computer If there is only one interface the dialog box is not shown and the relevant IP address is obtained Select Interface Select Interface Card BUFFALO LUA2 3 LI2 ATX Fast Ethernet Adapter 2 1 92168250 vw E Cancel If the configuration device is set to Remote Device on the Main Tab Page the following dialog box is displayed to select the interface to use to connect to the device when the New Button is clicked Select Interface Select Interface Card BUFFALO LUA2 3 LI2 ATX Fast Ethernet Adapte
24. g The display format for each configuration member is shown below Bit The data is displayed as TRUE or FALSE Not bit The tag data is displayed with the display format that is shown above for each unit that is defined in the user definitions Ethernet IP Monitor Tool Operation Manual R157 2 6 3 Message Tab Page The Message Tab Page is used to monitor message tags The tab page is shown below Producer Message Connection Tag List Tag Data Tag Member D mTag01 HEX ODEC OBIN Type DWORD OASscll O ASCII SWAP User Define 2 6 3 1 Monitoring Tag Status The Message Tab Page is used to monitor the following data for all message tags Status The following icons are displayed next to the tag name to indicate the connection status Offline F Operation is normal P The connection is not established or an error occurred Size This column displays the tag size The cycle for checking the status of the tags is 500 ms Ethernet IP Monitor Tool Operation Manual R157 41 42 2 6 3 2 Monitoring Tag Data The data of the tag that is selected with the cursor in the Tag List Area is monitored The monitoring cycle for tag data is the same as the cycle for checking the status of the tags i e 500 ms You can select one of the following display formats for the tag data If the display format is HEX DEC or BIN the display type
25. gging cycle that was specified in the data logging settings Logging using a trigger condition cannot be performed if the Cyclic Logging Check Box is selected Ethernet IP Monitor Tool Operation Manual R157 The following information is shown in the logging results No The logging data number is displayed starting at 1 Tag Name This column displays the tag names Data This column displays the tag data in a hexadecimal byte string Detailed tag data can be displayed in a similar manner by selecting the tag on the Producer Tab Page or the Consumer Tab Page Ethernet IP Monitor Tool Operation Manual R157 47 Authorized Distributor
26. gurator File Connect Connects to the configuration device if it is a remote device File Disconnect Disconnects from the configuration device File Exit Exits the EtherNet IP Monitor Tool View Toolbar Shows or hides the toolbar View Status bar Shows or hides the status bar Help Version Information Displays the EtherNet IP Monitor Tool s version information 2 3 Toolbar You can execute the following functions from the toolbar Creates a project Opens an existing project Saves the project Connects to the configuration device if it is a remote device Disconnects from the configuration device Sum mim a 0 Displays the EtherNet IP Monitor Tool s version information Ethernet IP Monitor Tool Operation Manual R157 11 2 4 Main Tab Page The Main Tab Page is shown below Main Setting Monitoring Configuration Device Local SYSMAC Gateway Rev 2 x Network Status Local IP Address Dlocalt 192 168 0 5 ev 192 168 250 5 Dev2 192 168 250 6 SYSMAC Gateway Service Status Stopped Startup Type Manual Connection Status CP Status Tag Type Total Count OK Count 2 Producer 4 D Consumer 4 D ucuM 2 Class3 2 Device Information Vendor OMRON Corporation Device Type Communications Adapter Product Code 1633 Product Name SYSMAC Gateway Revision 2 01 as Address c The fo
27. ing settings are made in the Create User Define Dialog Box Member Name This box is used to specify the user definition member name A maximum of 48 characters can be entered Unit This box is used to specify the data type to use for the member The data types that can be specified are given below e Bit e BYTE e WORD e DWORD Size This box is used to specify the data size to use for the member in increments of the size of the data type This can be set to any value at which the total size for all members does not exceed the total size of the user definition The OK Button is clicked to add the member to the user definition information Members are added as according to the position of the cursor when the Add Button is clicked When a member is added edited or deleted the size of the remaining addresses Hemained Adaress is automatically updated as the last member If the size is not a multiple of the default data type that is set in user definition options a warning message is displayed at the bottom of the User Define Tab Page Member is not selected The member is added as the last member Member is selected The member is added after the selected member A user definition member is selected and then the Edit Button at the right side of the tab page is clicked to edit the selected member A similar dialog box as that for adding a member is displayed The OK Button is clicked after editing the
28. is not set to Local SYSMAC Gateway the uploaded data includes only the parameters that can be set with the Network Configurator 2 5 1 5 Download This button downloads the current parameters to the connected device If the configuration device is not set to Local SYSMAC Gateway the downloaded data includes only the parameters that can be set with the Network Configurator 2 5 1 6 Verify This button is used to verify parameters with the connected device If the configuration device is not set to Local SYSMAC Gateway the verified data is performed only for the parameters that can be set with the Network Configurator 2 5 1 7 Reset This button resets the connected device Resetting is possible only if the configuration device is set to SYSMAC Gateway 2 5 1 8 Clear Connect Disconnect Counter This button is used to clear the connection disconnection counter for all of the tags of the connected device Ethernet IP Monitor Tool Operation Manual R157 2 5 2 Producer Tab Page The Producer Tab Page is used to set produce tags The tab page is shown below y Basic Consumer Message User Define Tag Name Size RPI Range RPI Max RPIMin RPI Default User Defi pTag1 2Byte Disable pTag2 2Byte Disable SPTag3 2Byte Disable pTag4 2Byte Disable Tags that are set on this tab page have with only one tag in each tag set The specified tag names are treate
29. l performance is subject to the OMRON Warranty and Limitations of Liability ERRORS AND OMISSIONS The information in this manual has been carefully checked and is believed to be accurate however no responsibility is assumed for clerical typographical or proofreading errors or omissions 4 Ethernet IP Monitor Tool Operation Manual R157 Related Manuals e CPU Units Man No Model numbers Manual name W472 CJ2H CPUGLT EIP CJ2H CPU6GLI CJ2M CPULTI SYSMAC CJ Series CJ2 CPU Unit Hardware USER S MANUAL W473 CJ2H CPU6LLEIP CJ2H CPU6L CJ2M CPULTI SYSMAC CJ Series CJ2 CPU Unit Software USER S MANUAL W394 CS1LI CPULLLIHTI CJ2H CPU6LLEIP CJ2H CPU6L CJ2M CPULTI CJ1L CPULLILI CI NSJLLICETTTHILITI SYSMAC CS Series SYSMAC CJ Series and SYSMAC One NSJ Series Programmable Controllers INSTRUCTIONS REFERENCE MANUAL W474 CS1LI CPULLLIHTI CJ2H CPU6LL EIP CJ2H CPU6L CJ2M CPULTI CJ1L CPULLILI CI NSJLLICLTTTIHLITI SYSMAC CS Series SYSMAC CJ Series and SYSMAC One NSJ Series Programmable Controllers PROGRAMMING MANUAL W342 CS1G CS1H CS1D CS1W CJ2H CJ2M CJ1G CJ1H CJ1M CJ1W CP1H CP1L CP1E NSJ SYSMAC CS CJ CP Series and SYSMAC One NSJ Series Communications Commands REFERENCE MANUAL Communications Units W465 CS1W EIP21 CJ1W EIP21 CJ2H CPUGLT EIP CJ2M CPUSLI SYSMAC CS and CJ Series EtherNet IP Units Communications Commands REFERE
30. llowing operations can be performed from the Main Tab Page Configuration Device Select the configuration device to set and monitor You can select any of the devices that are given in the supported model list For SYSMAC Gateway you can select either local or remote devices Network Status This area is used to monitor and display the status of devices that are registered on the Setting Tab Page Connection Status This area is used to monitor and display the status of tags that are registered on the Setting Tab Page SYSMAC Gateway Service This area is used to start and stop the communications services if the configuration device is a local SYSMAC Gateway device Device Information This area displays information on the configuration device 12 Ethernet IP Monitor Tool Operation Manual R157 2 4 1 Setting the Configuration Device The Configuration Device Box is used to select the device to set and monitor with the EtherNet IP Monitor Tool You can select any of the devices that are given in the supported model list For SYSMAC Gateway you can select either local or remote devices The default is the device that was previously selected If a device was not previously selected the default is Local SYSMAC Gateway If the SYSMAC Gateway is not installed on the computer that is being used for operation Local SYSMAC Gateway is not displayed The device information is displayed in the Device Informa
31. member to update the user definition information The Remained Address member which is the last member cannot be edited A user definition member is selected and then the Delete Button at the right side of the tab page is clicked to delete the selected member The OK Button is clicked to delete the member after confirmation The Remained Address member which is the last member cannot be deleted To change the position where a member is displayed the member is selected and the Up Button or the Down Button at the right side of the tab page is clicked The Remained Address member which is the last member cannot be moved Ethernet IP Monitor Tool Operation Manual R157 2 5 5 4 Uploading and Downloading User Definitions The Upload Button is clicked to upload as a user definition a user structure that is defined in the SYSMAC Gateway The Download Button is clicked to download a user definition as a SYSMAC Gateway user structure Uploading and downloading are possible only if the configuration device is set to Local SYSMAC Gateway Data is assigned as given below when uploading or downloading e Upload Struct Name The user definition name Struct Member Name The user definition member name Member Data Type BOOL Bit 1 channel data WORD 2 channel data M DWORD 4 channel data 2 DWORD elements Other An error occurs and the structure is not uploaded e Download User Define Name The name of the st
32. nd stopping downloads of configuration data is output Explicit Message Information on the explicit messages that were sent and received with the explicit message server is output Error Error information such as connection timeouts for explicit messages is output Ethernet IP Monitor Tool Operation Manual R157 The Edit Data Logging Parameters Button is clicked to display the following dialog box and set the logging parameters Edit Data Loeeine Parameters Trigger Logging Tag Tag Name f Tag Name 1 iv Offset D Tag Name 2 Type BYTE v Tag Name 3 ha Mask 00 HEX Tag Name 4 v Match 00 HEX Tag Name 5 v Tag Name 6 v Trigger2 Tag Name 7 v Tag Name y Tag Name 8 v Offset 0 Tag Name 9 Iv Type BYTE v Tag Name10 M Mask 00 HEX Logging Buffer Size Logging Cycle Match 00 HEX 32 KByte 5000 His Trigger Condition Triggeri OK O Triggeri NG OTrigger2 OK OTrigger2 NG O Multi c ERE neg ae a Trigger OK v AND v Trigger2 OK x Up to ten logging tags can be registered The logging buffer size is 1 to 256 Kbytes The logging cycle is 1 000 to 60 000 ms e Trigger Areas Tag Name This box is used to specify the name of the tag that is used as a trigger Offset This box is used to specify the tag data byte offset for starting to trigger logging Type This box is used to specify the data typ
33. onnection Time 316265 ms v a PTAG SGW 002 v The cycle for checking the status of the connections is 500 ms Ethernet IP Monitor Tool Operation Manual R157 43 2 6 4 1 Producer List The Producer List Area is used to monitor the following items for each tag Inactive tags are not monitored Tag Name The name of the produce tag is displayed The following icons are displayed next to the tag name to indicate the connection status D Offline EJ Operation is normal 2 The connection is not established or an error occurred Size This column displays the tag size The size is displayed in bytes Connection Time The total connected time for the tag is displayed The time is displayed in milliseconds Disconnection Time The total disconnected time for the tag is displayed The time is displayed in milliseconds Connection Count This column displays the connection count Connected Consumer The number of consumers connected to the tag is displayed Related Consumer List The following information on connected consumers is displayed Consumer Name The name of the consumer is displayed The name is displayed if the device at the IP address is registered on the Setting Tab Page The name is displayed as Device xx where xx is the device number if it is not registered IP Address The IP address of the consumer is displayed Connection Time The total connected time for
34. r 2 1921 68250 v E Cancel If there is only one interface the dialog box is not shown and the relevant IP address is obtained To edit settings for existing ports the Edit Button is clicked after selecting the setting to edit or the setting is double clicked The same dialog box as for creating a new port is displayed and can be edited The settings cannot be changed if the configuration device is set to Remote Devices on the Main Tab Page To delete an existing port the Delete Button is clicked after selecting the settings The settings are deleted when the Yes Button is clicked after the delete confirmation dialog box is displayed The settings cannot be changed if the configuration device is set to Remote Devices on the Main Tab Page Ethernet IP Monitor Tool Operation Manual R157 19 2 5 1 2 Setting Remote Network Ports The New Button is clicked to display the following dialog box to set a port These settings cannot be made if there are no local ports enabled in the local port settings Edit Remote Network Port Node Name Local Portto use local vl Port Type 0 IPAddess 0 0 0 0 Node Name This box is used to specify the configuration device name A maximum of 32 bytes of characters can be set Local Port to use This box is used to specify the local port to use to communicate with the configuration device A list of ports set in Edit Local Network Port Dialog Box is
35. r Tab Page is used to set monitor tags The tab page is shown below Producer e Connection Tag List Tag Data Tag Size Connection Member CTAG_SGW_001 12008 ams D CTAG SGW 002 1200B 0ms D CTAG SGW 003 1200B Oms D CTAG SGW 004 1200B Oms B cTaG_sGw_o05 1200B Oms D cTaG_sGw_o06 1200B 0ms D CTAG SGW 007 1200B 0ms D CTAG SGW 008 1200B 0ms CTAG SGW 009 1200B 0ms D CTAG SGW 010 1200B 0ms D CTAG SOW 011 1200B 0 ms D CTAG SGW 012 1200B 0ms D CTAG SGW 013 1200B 0ms D CTAG SOGW 014 1200B 0ms D CTAG SGW 015 1200B 0ms D CTAG SGW 016 1200B 0ms D CTAG SGW 017 1200B 0ms D CTAG SGW 018 1200B 0ms D cTAG SGW 019 1200B 0ms D CTAG SGW 020 1200B 0 ms HEX ODEC OBIN Type DWORD w O ASCII O ASCII SWAP Cl User Define 2 6 2 1 Monitoring Tag Status The Consumer Tab Page is used to monitor the following data for all consume tags Status The following icons are displayed next to the tag name to indicate the connection status Offline F Operation is normal P The connection is not established or an error occurred Size This column displays the tag size Connection Time This column displays the total connection time The cycle for checking the status of the tags is 500 ms Ethernet IP Monitor Tool Operation Manual R157 39 40 2 6 2 2 Monitoring Tag Data The data of the tag that is selected with the cursor
36. re displayed if the configuration device is set to Local SYSMAC Gateway The status can also be identified using the icon that is displayed beside the port name The icon and status displays change with the device status as shown in the following table E e Local Port Local SYSMAC Gateway Servicing is stopped e Remote Port There is no corresponding status OK e Local Port Local SYSMAC Gateway The port is open e Remote Port There is a device at the IP address 4 NG Local Port Local SYSMAC Gateway The port is closed e Remote Port There is no device at the IP address To confirm whether a device is at the IP address PING is used to send and receive an ICMP packet ICMP packets are consecutively sent to all IP addresses The ICMP packet response monitoring time is 500 ms and the cycle for checking for devices at the IP addresses is 5 000 ms Ethernet IP Monitor Tool Operation Manual R157 2 4 3 Connection Status Area The following information is displayed in the Connection Status Area Tag Type The following are displayed as tag types e Producer Connection type class 1 produce tags e Consumer Connection type class 1 consume tags e _UCMM Connection type UCMM message tags e Class 3 Connection type class 3 message tags Total Count This column displays the total number of types that are registered on the Setting Tab Page OK Count This column displays the to
37. ructure User Define Member Name The name of the structure member Member Data Type Bit gt BOOL WORD WORD DWORD DWORD If the number of members or the number of nesting levels exceeds the number that is supported by the SYSMAC Gateway the download is not performed Ethernet IP Monitor Tool Operation Manual R157 2 6 Monitoring Tab Page The Monitoring Tab Page is shown below Main Setting Monito in Producer Comum Meses Genrectn Data Log Tag List Tag Data Tag Size TargetIP Connectior Member PTAG_SGW_001 1200B8 D PTAG_SGW_002 1200B D PTAG_SGW_003 1200B D PTAG_SGW_004 1200B D PTAG_SGW_005 1200B8 D PTAG_SGW_006 1200B8 D PTAG_SGW_007 12008 JD PTAG_SGW_o08 12008 D PTAG_SGW_o09 12008 JO PTAG SGW 010 1200B D PTAG SGW 011 1200B JPTAG SGW 012 1200B D PTAG 8GW 013 1200B D PTAG 8GW 014 1200B D PTAG 8GW 015 1200B D PTAG SGW 016 1200B D PTAG SGW 017 1200B D PTAG SGW 018 1200B JPTAG SGW 019 1200B JPTAG SGW 020 1200B HEX ODEC O BIN Type DWORD v O ASCII O ASCII SWAP User Define The following operations can be performed from the Monitoring Tab Page Producer This tab page is used to monitor produce tags Consumer This tab page is used to monitor consume tags Message This tab page is used to monitor message tags Connection This tab page is used to monitor connection information
38. sed to specify the connection type multicast or point to point RPI This box is used to specify the RPI The supported RPI ranges depend on the configuration device Timeout This box is used to specify the timeout multiplier Remote Node This box is used to specify the remote node to which the connection is established Remote Tag Name This box is used to specify the produce tag of the remote node to which the connection is established User Define This box is used to specify the user defined tag data displays To edit settings for existing ports the Edit Button is clicked after selecting the setting to edit or the setting is double clicked The same dialog box as for creating a new port is displayed and can be edited To delete an existing port the Delete Button is clicked after selecting the settings The settings are deleted when the Yes Button is clicked after the delete confirmation dialog box is displayed 28 Ethernet IP Monitor Tool Operation Manual R157 2 5 4 Message Tab Page The Message Tab Page is used to set message tags The tab page is shown below These settings are disabled if the configuration device is not set to Local SYSMAC Gateway y User Define Basic Producer Consumer Tag Name Size Connect Remote Remote Tag User Defi mTag1 2Byte UCMM Dev1 Tag1 XymTag2 2Byte UCMM Dev1 Tag2 mTag3 2Byte Class3 Dev1 Tag3 mTag4 2Byte Class3
39. t IP Monitor Tool Operation Manual R157 2 6 4 Connection Tab Page The Connection Tab Page is used to monitor the connection status of consume tags and produce tags The tab page is shown below It is used to monitor only connections that are specified as being connection type class 1 connections Producer Consumer Message i i Data Log Producer List Consumer List PTAG_SGW_001 crT e sew ont in Size 1200Byte Size 1200Byte Connection Time 316143 ms Connection Time 316359 ms Disconnection Time 0 ms Disconnection Time 0 ms Connection Count 1 Destination IP Address 192 168 250 3 Connected Consumer 1 8 Related Producer List Related Consumer List PTAG_SGWV_001 8 RemoteDev1 Remote IP Address 192 168 250 3 IP Address 192 168 250 3 O T RPI 100 0 ms Connected Time 316147 ms E T 0 RPI 50 0 ms Disconnected Time 0 ms O T Timeout 400 0 ms Destination IP Address 239 192 1 169 T 20 Timeout 200 0 ms O T RPI 100 0 ms O gt T API 100 0 ms T 0 RPI 50 0 ms T 0 API 50 0 ms O T Timeout 400 0 ms O T Connection ID 0x215A0403 T 0 Timeout 200 0 ms T 0 Connection ID 0x21540503 O T API 100 0 ms Bg e CTAG SGW 002 T 0 API 50 0 ms Size 1200Byte O T Connection ID 0x96860412 Connection Time 316365 ms T 0 Connection ID 0x96860512 Disconnection Time 0 ms 6 PTAG_SGYV_002 Destination IP Address 192 168 250 3 Size 1200Byte a Related Producer List C
40. t consume tags Message This tab page is used to set message tags User Define This tab page is used to set user definitions for displaying tag data Ethernet IP Monitor Tool Operation Manual R157 17 2 5 1 Basic Tab Page The following operations can be performed from the Basic Tab Page Local Network Port This area is used for local network port settings The following settings are made according to configuration device that is set on the Main Tab Page e Local SYSMAC Gateway SYSMAC Gateway ports e Remote Devices Network ports on the local computer that are used to access configuration devices Remote Network Port This area is used to set configuration device ports Logging Configuration This area is used to set the folder for storing log data and to set the data log Upload This button is used to upload parameters from a device Download This button is used to download parameters to a device Verify This button is used to verify parameters with the device Reset This button resets the device Resetting is possible only if the configuration device is set to SYSMAC Gateway Clear Connect Disconnect This button is used to clear the connection disconnection counter Counter for the configuration device tags 2 5 1 1 Setting Local Network Ports If the configuration device is set to Local SYSMAC Gateway on the Main Tab Page the following dialog box is displayed to set a port when the N
41. t your OMRON representative if you have any questions or comments Warranty and Limitations of Liability WARRANTY OMRON s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year or other period if specified from date of sale by OMRON OMRON MAKES NO WARRANTY OR REPRESENTATION EXPRESS OR IMPLIED REGARDING NONINFRINGEMENT MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE OMRON DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS WHETHER SUCH CLAIM IS BASED ON CONTRACT WARRANTY NEGLIGENCE OR STRICT LIABILITY In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted INNO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY REPAIR OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED STORED INSTALLED AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION ABUSE MISUSE OR INAPPROPRIATE MODIFICATION OR REPAIR 2 Ethernet IP Monitor Tool Operation Manual R157 Application Consider
42. tal number of tags for which communications ended normally The icons that are displayed next to the tag type will change according to the connection status as described in the following table The total count is O or the device is offline The registered tag exists and all connections are normal The registered tag exists but at least one of the connections is not established eo ee The registered tag exists and there are no connections UCMM class 3 is supported only for Local SYSMAC Gateway The cycle for checking the status of the tags is 500 ms If the Details Button is clicked the following dialog box is displayed to show the status of the tags Detail Connection Status X Producer Consumer UCMM Class 3 Tag Name Status D pTael man D pTae2 mE D PTae3 pTag4 m Jump to Connection Monitor Ethernet IP Monitor Tool Operation Manual R157 15 The Detail Connection Status Dialog Box displays the following information on property tab pages for each tab type Tag Name This column displays the tag names Status This column displays the tag connection status Normal OK Error not connected NG The icons that are displayed next to the tag name will change according to the connection status as described in the following table Offline Operation is normal The connection is not established or an error occurred
43. te an existing port the Delete Button is clicked after selecting the settings The settings are deleted when the Yes Button is clicked after the delete confirmation dialog box is displayed 26 Ethernet IP Monitor Tool Operation Manual R157 2 5 3 Consumer Tab Page The Consumer Tab Page is used to set consume tags The tab page is shown below JZ Basic p User Define Tag Name Size Connecti RPI Remote Remote Tag User Defi ScTag1 2Byte Multi cast 50 0ms Dev1 Tag1 cTag2 2Byte Multi cast 50 0ms Dev1 Tag2 ecTag3 2Byte Multi cast 50 0ms Dev1 Tag3 ScTag4 2Byte Multi cast 50 0ms Dev1 Tag4 Tags that are set on this tab page have only one tag in each tag set The specified tag names are treated as tag set names The New Button is clicked to display the following dialog box to set a tag Tag Name Size 2 Byte Connection Type Multi cast connection RPI 500 ms Timeout Packet Interval RPI x 4 Remote Node Dev1 Remote Tag Name User Define Ethernet IP Monitor Tool Operation Manual R157 27 Tag Name This box is used to set the tag names The characters that can be input and the number of bytes of characters that can be input depend on the configuration device Size This box is used to specify the tag size The supported size settings depend on the configuration device Connection Type This box is u
44. tion Area for the selected device If Remove Device is selected as the configuration device the Connect Button in the toolbar is enabled The connection is made to the configuration device from the following dialog box Browse Network Select a device that you would like to connect Browse Device Information Vendor ID Product Name Device Type Revision Option If the selected device does not match the setting in the Configuration Device Box the following error message is displayed and the connection is not made The Specified device type is not same as the current configuration device type If the Disconnect Button is clicked monitoring is stopped and the device is disconnected Ethernet IP Monitor Tool Operation Manual R157 13 2 4 2 Network Status Area The following information is displayed in the Network Status Area Local This column displays the local and remote port names that are set on the Setting Tab Page If the configuration device is set to Remote Devices the local port names are not displayed Only the remote port names are displayed IP Address This column displays the port names that are assigned to the address names CIP Port The CIP port numbers of the port names are displayed only if the configuration device is set to Local SYSMAC Gateway Status This column displays whether the active status of the device is OK The open closed status of the ports a
45. tions of the EtherNet IP Monitor Tool are listed below Function Details Monitoring Network status display You can display the IP address CIP port number and the operating status of the configuration device Connection status display You can display the tag type Producer Consumer UCMM or Class 3 the total number of connections and the communications status of the connections Tag status display You can display the communications status and data of producer and consumer tags You can display detailed information such as the total number of connections the connection time and the time not connected Data logging You can set the trigger conditions and log tag data Logged data is saved to a file This function is supported only for SYSMAC Gateway Setting Tag and connection settings You can set producer tags consumer tags and message tags Message tags are enabled only for SYSMAC Gateway Ethernet IP Monitor Tool Operation Manual R157 e Supported Models Model Name Remarks CJ2H CPULLLEIP CJ2H built in EtherNet IP port 1 CJ1W EIP21 CJ series EtherNet IP Unit 1 CS1W EIP21 CS series EtherNet IP Unit 1 WS02 SGWC1 SYSMAC Gateway 2 1 Unit version 2 1 or later is required 2 Software version 1 3 or higher is required e System Requirements Item System requirement Operating system Japanese or English
46. wing settings are made in the Create User Define Dialog Box Define Name This box is used to specify the definition name A maximum of 48 characters can be entered Size This box is used to specify the overall size of the user definition in bytes The size can be set to between 1 and 1 444 bytes However the value must be a multiple of the default data type that is specified in operation settings The OK Button is clicked to add the definition name to the user definition name list and register the following member This member is always displayed as the last user definition member It cannot be edited or deleted Remained Address BYTE Overall user definition size Registered member size BYTE A user definition is deleted if the user definition is selected in the user definition name list and the Delete Button is clicked The OK Button is clicked to delete the user definition after confirmation Predefined user definitions cannot be deleted Click the Create Define File Button to save a user definition that you have created in a file Ethernet IP Monitor Tool Operation Manual R157 33 34 2 5 5 3 Creating Editing and Deleting User Definition Members The Add Button at the right side of the tab page is clicked to add a user definition member The Edit User Define Member Dialog Box is shown below Edit User Define Member Member Name Unit Bit ly Size Unit The follow

R157-E1-02 - Products

Contents

Download Pdf Manuals

Related Search

Related Contents