WB-72 WALL MOUNT BRACKET
Contents
1. 5 Match the center of viewing guide with the centerline you marked in Step 1 Figure 8 6 The mounting brackets are designed with a center of viewing guide on the outside Figure 9 Align the Mounting Mounting Bracket Center of Viewing Guide Bottom of Flat Panel Figure 9 pg6 ORIGIN 7300 Bolsa Avenue Westminster CA 92683 Tel 714 766 6300 Fax 714 766 6310 http www orionimaaes com Installation and User s Guide 7 The Griplates have M4 M5 M6 and M8 hole patterns to fit the hardware that your flat panel requires EXAMPLE f your plasma uses M8 x 20 Phillip screws Use the M8 mounting points Figure 10 8 Once the mounting brackets are aligned secure the Griplate to the flat panel Use 1 Griplate per mounting point Figure 11 NOTE The dimples of the top plates have to be facing up and the bottom dimples must be facing down Screwdriver Dimples Facing Up DIMPLES FACING UP DIMPLES A FACING DOWN x PLES ACING DOWN Figure 10 Figure 11 ORION 7300 Bolsa Avenue Westminster CA 92683 Tel 714 766 6300 Fax 714 766 6310 pg7 http www orionimaaes com Installation and User s Guide WB 72 Installation 1 Using a commercially available wood stud finder locate the 16 or 24 stud centers behind the wall Figure 12 2 Once found make a pencil marking on the center of the wood studs Figure 13 NOTE The wall plates2. CEDURE BYAQUALIFIED SERVICE TECHNICIAN AS OUTLINED IN THE INSTALLATION INSTRUCTIONS MUST BE ADHERED TO FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY OR EVEN DEATH SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE INSTALLATION OF THIS PRODUCT USE PROPER SAFETY GEAR AND TOOLS FOR THE INSTALLATION PROCEDURE TO PREVENT PERSONAL INJURY PRIOR TO THE INSTALLATION OF THIS PRODUCT THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE Indicates that the power plug is to be disconnected from the power outlet Safety precautions must be taken at all times Warning and Caution statements A secure structure must support the weight or load of the display When mounting to a wall that contains wooden studs dead center of the wooden stud must be confirmed prior to installation Do not install on a structure that is prone to vibration movement or chance of impact Failure to do so could result in damage to the display and or damage to the mounting surface Do not install near heater fireplace direct sunlight air conditioning or any other source of direct heat energy Failure to do so may result in damage to the display and could increase the risk of fire At least two qualified people should perform the installation pro
3. ORIO Installation and User s Guide SEEING IS BELIEVING BIG SCREEN FLAT LCD DISPLAY MOUNT MODEL WB 72 WALL MOUNT BRACKET http www orionimages com All contents of this document may change without prior notice and actual product appearance may differ from that depicted herein http www orionimaaes com Installation and User s Guide TABLE OF CONTENTS Warning Statements oii ceeeceecccceccccccceeeeceeeeeeeeeanaeeeeceeeeeeeeeeauaaaeseeeeeeeeeeeanaaeeeeeeeeeeeeenaaaens 3 FES IS E 4 Installation Tools V V 4 Mounting Bracket Installation wooo ccceccccecccaeeeeeeccaueeeeeeeeecaueceeeseeeaaeceeeeeecaueeeeeeeeeaneneeeess 5 WB 72 cric M E 8 Installing the Flat Panel Display WB 72 sssssseseeennnnm mmm 10 Technical Specifications eeeseesssssssesssseeeee nnnm nnne nenne nnnn nnn nnne rrr sss nnne 11 rg M EE 12 Soxco 12 ORION 7300 Bolsa Avenue Westminster CA 92683 Tel 714 766 6300 Fax 714 766 6310 pg2 htto www orionimaaes com Installation and User s Guide WARNING WARNING WARNING POPP PPO Warning Statements THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST A MAXIMUM WEIGHT OF 50 LBS IF NOT THE WALL MUST BE REINFORCED PROPER INSTALLATION PRO
4. aterials and workmanship Orion Images is not liable for improper installation that results in damage to mounts adapters display equipment or personal injury Contact Orion Images In the event of missing and or damage equipment or technical questions the following information can help in the completion of the installation Address 7300 Bolsa Avenue Westminster CA 92683 Tel 714 766 6300 Fax 714 766 6310 Email sales orionimages com Website http www orionimages com CIR CIN 7300 Bolsa Avenue Westminster CA 92683 Tel 714 766 6300 Fax 714 766 6310 pg12
5. cedure Injury and or damage can result from dropping or mishandling the display Recommended mounting surfaces wooden studs and solid flat concrete If the mount is to be installed on any surface other than wooden studs use suitable hardware which is commercially available Contact Orion Images with any technical installation questions DIR CIN 7300 Bolsa Avenue Westminster CA 92683 Tel 714 766 6300 Fax 714 766 6310 pg3 http www orionimaaes com Installation and User s Guide Part List NOTE This wall mount is shipped with all proper installation hardware and components Make sure that none of these parts are missing and or damaged before beginning installation If there are parts missing and or damaged please stop the installation and contact Orion Images 714 766 6300 Mounting WB 72 Wall Brackets Qty 2 Plate Qty 1 5 16 x 3 Lag Bolts 5 16 Flat wooden studs only Washers Qty 6 Qty 6 M6 x 30mm Lateral Shift TM Locking Screws Qty 2 on g M6 x 12mm Safety Knobs Qty 2 M8 Nylon Spacers Qty 6 M8 x 25mm Phillips Pan Head Screws Qty 6 Installation Tools Phillips Head Screw Driver Soft Material Blanket 1 2 Socket and Wrench Pencil Tape Measure Drill Gun Level Supplied ORION 7300 Bolsa Avenue Westminster CA 92683 Tel 714 766 6300 Fax 714 766 6310 pg4 htto www orionimaaes com Installation and User s Guide Mounting Bracket Installatio
6. have 16 and 24 mounting slot positions 3 Place the wall plate to the reference line and mark the six 6 lag bolt mounting points through the wall plate slots on the wall Stud Finder Mark the Wall and the Center of the Wood Studs Wood Stud behind the Wall Measure and Mark the Desired Viewing Height Figure 12 Figure 13 ORIGIN 7300 Bolsa Avenue Westminster CA 92683 Tel 714 766 6300 Fax 714 766 6310 P98 http www orionimaaes com Installation and User s Guide 4 Level the wall plate with the reference arrow pointing up to the ceiling Figure 15 5 Drill six 6 1 4 pilot holes to the marked wall 6 Secure the plate using the six 6 5 16 lag bolts and flat washers Figure 16 Mark the Six Mounting Slot Openings Wall Plate Figure 14 Wall Plate 5 16 x 3 Lag Bolts Figure 15 ORION 7300 Bolsa Avenue Westminster CA 92683 Tel 714 766 6300 Fax 714 766 6310 pg9 http www orionimaaes com Installation and User s Guide Installing the Flat Panel Display WB 72 WARNING AT LEAST 2 QUALIFIED PERSONNEL ARE STRONGLY RECOMMENDED FOR INSTALLATION OF THIS PRODUCT FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY AND POSSIBLE DAMAGE TO THE FLAT PANEL 1 Raise the flat panel with the mounting brackets secured to the flat panel and insert the top hooks over the upper rod The lower hooks should rest on the lower rod Fiaure 16 Wall Plate Bot
7. n NOTE Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to Failure to do so could result in serious personal injury and possible damage to the flat panel WARNING INVERT THE FLAT PANEL PLACE IT ON A SOFT FLAT SUFRACE TO PREVENT DAMAGE TO THE FLAT PANEL USE A BLANKET FOAM ETC FAILURE TO DO SO WILL RESULT IN DAMAGING THE FLAT PANEL DO NOT LAYTHE FLAT PANELON THE FLOOR WITHOUT ANY PROTECTION TO THE GLASS THE FLAT PANEL IS HEAVY AND FRAGILE AT LEAST 2 QUALIFIED PERSONNEL ARE STRONGLY RECOMMENDED FOR INSTALLATION OF THIS PRODUCT FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY AND POSSIBLE DAMAGE TO THE FLAT PANEL 1 Once the flat panel is inverted use a measuring tape to find the center of your flat panel measuring from outside to outside of the chassis Figure 4 2 Using a pencil lightly mark the center of your flat panel Figure 5 Mark the Center of the SMS m Bottom of s Flat Panel Inverted Flat Panel ORION 7300 Bolsa Avenue Westminster CA 92683 Tel 714 766 6300 Fax 714 766 6310 pg5 Installation and User s Guide http www orionimades com 3 Determine where the mounting points are Figure 6 4 Lay the mounting brackets stamped arrows facing out over the mounting points Figure 7 Mounting Brackets Mounttieg Points Bottom of Flat Panel Arrows Facing Out Figure 7 Figure 6
8. tom Figure 16 2 Make any lateral shift adjustment and lock it by tightening the two 2 M6 x 30mm Phillips screws found on the bottom of the mounting brackets Use the foot leveler to adjust your plasma CAUTION Do not over tighten the M6 x 30mm screws to the rods Figure 17 NOTE To remove the display from the wall simply back off the M6 x 30mm screws using a Phillips screwdriver and lift the unit of the wall carefully Figure 17 CIR CIN 7300 Bolsa Avenue Westminster CA 92683 Tel 714 766 6300 Fax 714 766 6310 pg10 htto www orionimaaes com Installation and User s Guide 3 Tilt the flat panel and secure the two 2 M6 x 12mm safety knobs to each of the mounting brackets Figure 18 NOTE To remove the display from the wall simply extend the display to its maximum tilt range remove the two 6 mm safety knurl knobs push the flat panel back to it s flat position loosen or remove the two 2 M6 x 30 lateral shift screws and lift the unit of the wall A K Nu due VEN A a iw y d EN i Figure 18 Technical Specifications mo EB _ DF m ea NH TE FLAT PANEL FOR ILLUSTRATION PURPOSES INL DCIR CIN 7300 Bolsa Avenue Westminster CA 92683 Tel 714 766 6300 Fax 714 766 6310 pgi http www orionimaaes com Installation and User s Guide Limited Lifetime Warranty All Orion Images products carry a limited lifetime warranty from ship date against defects in m
Download Pdf Manuals
Related Search