Home

HipTurner

1. Positioning HipTurner is retained in its pillow so that the nylon side is facing away from the assistant Position the HipTurner pillow very close to the users hip Illustration 1 and feed the nylon piece in under the small of the users back Illustration 2 The assistant on the opposite side grasps the functional handles and pulls the Use When the lift is raised the user is turned onto the fixed pillow and is therefore raised a couple of cm from the sheet so that the bedpan can be positioned centrally under the rear Illustration 5 The lift is then lowered and the user is now lying on the bedpan Raise the bedhead while the user is using the bedpan Then lower the bedhead and attach the func tional handles to the lift Before lifting one assistant grasps the handle of the bed pan so that it doesn t tip over when the lift is raised The user is turned again on the HipTurner s fixed pillow and the bedpan can now be removed While the user is still in the side position lower body hygiene can be performed Then lower the lift and feed the nylon piece under the small of the users back and remove nylon piece taut Illustration 3 and smooths it out under the users body Attach the functional handles to the lift and prepare the user for turning Illustration 4 If possible the user should grip the guard rail and bend his her legs Special features Notice Always check the product before use and after washing Nev
2. Etac Immedia A S Egeskowej 12 DK 8700 Horsens Denmark etac immedia etac com m xport ac Immedia A S geskovvej 12 K 8700 Horsens ac immediaGetac com www etac com exp ou m m Etac Sverige AB Box 203 334 24 Anderstorp S Tel 46 371 58 73 00 Fax 46 371 58 73 90 infoQetac se www etac se Etac AS Pb 249 1501 Moss N Tel 47 815 69 469 Fax 447 69 27 09 11 hovedkontor etac no www etac no Etac A S Egeskowej 12 8700 Horsens DK Tel 45 79 68 58 33 Fax 45 75 68 58 40 info etac dk www etac dk Etac GMBH BahnhofstraBe 131 45770 Marl D Tel 49 236 598 710 Fax 49 236 598 6115 info etac de www etac de Etac Holland BV Fluorietweg 16a 1812RR Alkmaar NL Tel 31 72 547 04 39 Fax 31 72 547 13 05 info holland etac com www etac com R82 UK Ltd Unit D4A Coombswood Business Park East Coombswood Way Halesowen West Midlands B62 8BH UK Tel 0121 561 2222 Fax 0121 559 5437 R82uk r82 com www r82 co uk Snug Seat Inc 12801 E Independence Blvd P O Box 1739 Matthews NC 28106 US Tel 1 800 336 7684 Fax 704 882 0751 information snugseat com Wwww snugseat com cetac Creating possibilities
3. HipTurner immedia Instruction for Use a part of Etac IMM1037_IFU_GB Version 5 2015 Illustrations Illustration 1 Illustration 4 Illustration 2 Illustration 5 Illustration 3 Contents Enn Page General Symbols Intended use Intended enviroment ee e iii 4 Practical hanalirig ace t t si ide ido 5 Notice Materials Cleaning ie ee Re Re Re Re eee eee nennen 6 Articles ceu EE eo mate ui EE Litas e ete Repo eon 7 Servico nto Mat zs e syed etr seti dee seda Pss tutus m it 8 General Thank you for choosing an Etac product To avoid accidents and injury when moving and handling the products read the manual carefully The person described as the user in this user manual is the person who is lying or sitting on the product The assistant or assistants are the people who manoeuvre the product This symbol appears alongside the text in the manual It draws the reader s attention to points at which there may be a risk to the health and safety of the user or assistant The products comply with the standards applicable for Class 1 products in the European Council Directive MDD 93 42 EEC on medical devices Lot no Batch no x x x x x x x x x x Production year Running number At Etac we strive to improve our products all the time and therefore we reserve the right to make changes to prod ucts without prior warning All measurements given on illustrations and similar material are fo
4. er use a defective product If the product shows signs of wear and tear it must be scrapped Read these instructions carefully It is important that assistants receive instruction in manual handling Etac offers advice and training for assistants For further information contact Etac Always use the correct manual handling techniques Encourage the client to assist where possible To ensure that the client feels safe and that every manual handling is smooth always plan the manual handling in advance There is a risk that the user may slide off Never leave the user alone on the edge of the bed Never leave the product on the floor Always make a risk assessment and secure that the _ assistive product can be used at the individual user and in combination with other devices that it is safe for the user and caregivers It is recommended that the guard rail is in place when the user is left on the glide system unless a risk assessment has found that the user can be safely left on the glide system without the need of guard rails Always remove the glide system when you have completed the job Do not use the product as a sling If in any doubt please contact Etac Materials HipTurner Glide piece 10096 nylon Handles 10096 polyester Cover on raised part 10096 non slip nylon with polyurethane surface Foam 10096 polyether The product should be checked regularly preferably each time it
5. is used and especially after wash Check that there is no damage to seams or fabric Never try to repair a product yourself Never use a defective product Cleaning Washing instructions Do not use fabric softener as this will reduce the glide effect Articles Article no Description Size mm IM462 HipTurner glide piece B250 x L800 mm W400 x L200 Service Information Thank you for choosing an Etac product If the customer makes adjustments repairs or combinations not predetermined by Etac the Etac CE certification and Etac warranty will be voided Warranty Two year warranty on material and manufacturing defects provided that the product is used correctly Before taking a product in service always make a risk assesment according to national and or local legislation First inspection e Is the packaging intact e Read the label on the packaging and check the article no and product description e Check that Short Instruction is enclosed updated User Manual Instruction for use can be downloaded from www etac com or contact your Etac Customer Service or the local distributor e Check the label on the product does it include article no product description lot batch no cleaning instructions and supplier name Periodic Inspection e Make sure that your Manual transfer system always is in a perfect condition After wash always check materials stitching handles buck
6. les e If the product shows signs of wear and tear it must be removed from service immediately Lot no Batch no A x M E 7 7 m Production year Running number A Visual inspection Check the product Stability test gt Ensure that the materials seams stitching KG Try to bend the product verify that it feels firm handles buckles are intact faultless stable and solid Mechanical load or stress Test handles Test low high friction Draw hard in the handles in opposite directions 3 Place the product on a firm surface or a bed and control the material seams and stitching i place your hands on the material and test the Test buckles friction by pushing your hands down into the Lock the buckle and draw in opposite directions product control the buckle and the stitching Low friction slides effortlessly High friction no sliding moving Check always Manual transfer aids with handles straps and buckles Manual transfer aids for sitting and lying transfer Manual transfer aids with high or low friction The product can be AT x scrapped in accordance k with national regulations Read the User Manual If in doubt please contact Etac Customer Service or local distributor for more information and guidance For more information about training and the use of these products contact the Etac transfer experts www etac com Class 1 European Council Directive MDD 93 42 EEC on medical devices Manufacture
7. r guidance only and Etac cannot be held liable for errors and defects The information given in this manual including recom mendations combinations and sizing does not apply to special orders and modifications If the customer makes adjustments repairs or combinations not predetermined by Etac the Etac CE certification and Etac warranty will be voided If in doubt please contact Etac Warranty Two year warranty on material and manufac turing defects provided that the product is used correctly For further information on the Etac transfer range see www etac com The product can be scrapped in accordance with national regulations Symbols Washing Iron Handwash Do not dryclean Wipe off Do not bleach Tumbledry Risk of sliding down Keep out of the sun User mass limit maximum rated load Never leave on the floor The product can be scrapped in accordance with national regulations Warning Read the User Manual Manufactures Class 1 European Council Directive MDD 93 42 EEC on medical devices Batch no Lot no Intended use HipTurner is used to position a bedpan easily and com fortably under a user It is especially useful when the user is lying on a pressure relieving mattress where positioning a bedpan is more difficult This device reduces the strain on assistants and minimises the risk of bedpan spills Intended enviroment Acute care Long term care Home care Practical handling

HipTurner

Contents

Download Pdf Manuals

Related Search

Related Contents