Home

SwyxExpress X75/X150

1. The detailed documentation is stored in PDF form with a direct link on the desktop Once your licenses are released for use and customer specific parameters numbers etc have been configured SwyxExpress is immediately available as a communication platform in your business 1 1 Variants e NetPhone Max100 is suitable for up to 75 users and 38 voice fax channels e SwyxExpress X150 is suitable for up to 150 users and 38 voice fax channels Various BRI and PRI ISDN cards may be optionally delivered The maximum number of ISDN cards is two Both Variants can be used as a master server with a SX2 DualPRI card in a master standby scenario SQL Server 2008 R2 Workgroup Edition at least installed on the In master standby scenario you must have a licensed version of the master system 4 gt What is SwyxExpress X75 X150 1 2 ep of supply e SwyxExpress server hardware Options ISDN card s RAID 1 Controller PCle Hot Swap HDD rack redundant power supply e Various cables AC power cord s ISDN cables number dependent on the optionally ordered ISDN cards as well as synchronization cable s e This user manual e Swyx End User License Agreement EULA e Swyx Standard Business Conditions e Microsoft license key label on the computer 1 3 Installation Overview This documentation gives you an overview of the really essential steps for the configuration of SwyxExpress The complete SwyxWare DVD is
2. gt SwyxExpress Backup and Restore 19 This is how you create USB rescue media 1 Restart the computer The startup screen will appear 2 Choose Create USB Rescue Media and confirm your selection with Enter 3 Connect the USB storage device to a USB port on the computer Wy Press y to confirm you want to proceed Wye Press y if you want an automatic restart of the computer after the rescue media is created Wy 6 Press y to confirm formatting of the USB storage media Any possible data on the storage media will be lost The creation of the USB rescue media is begun and may take considerable time The progress will be displayed When creation is finished the message Creation of USB rescue media succeeded will appear 7 Withdraw the USB connector of the storage media from the USB port on the computer means of restoring SwyxExpress locally on a new disk when a hard Keep the created USB rescue media in a safe place It is the only disk is defective 8 If you did not select automatic restart of the computer Step 5 press Enter to restart the computer The USB rescue media is created xe This is how you restore the delivery state of the hard disk with the USB P rescue media Install the hard disk on which you want to restore the delivery state of SwyxExpress 2 Change the order of the boot devices in the BIOS setup so that the USB device option is listed first 3 Connect t
3. computer after the backup is completed 6 If there is already a previous local backup you will be asked whether you want to overwrite this backup e If you want to overwrite the existing local backup the current state of the Windows partition is saved e If you want to preserve the local backup the backup operation is cancelled 22 gt SwyxExpress Backup and Restore 7 Ifyou selected option 5 you will be asked for the computer name share name and the network login username and password Enter the necessary information domain name FQDN aa If necessary enter the computer name with the fully qualified DNS e g Computername as FQDN computer 01 server net If necessary enter the user name plus the domain where the user Goor is registered e g Username domain user name server net Ze To specify a subdirectory for the network share use 7 E g Share subfolder Users Public Backup 8 Confirm all inputs with Enter The backup operation begins The backup may take considerable time the progress will be displayed When a copy of the backup file has been created this message appears Backup file successfully copied as Express_Backup_YYYYMMDDHHMiMiSS When creation is finished the message Process complete will appear 9 Ifyou did not select automatic restart of the computer Step 5 press Enter to restart the computer The local backup is overwritten If desired a
4. on external storage media so A that you can always restore the operating system snapshot of your choice see chapter 7 2 Back up and Restore SwyxWare Installation page 20 gt SwyxExpress Backup and Restore 25 CTF w __ This is how you restore the delivery state 1 Restart the computer The startup screen will appear Choose Restore Factory Default Press y to confirm you want to proceed If there is a local backup you will be asked whether you want to delete the backup too e Ifthe existing backup is deleted the system is returned to the original delivery state e Ifthe backup is preserved the original delivery state is likewise restored so that it is necessary to begin with the startup of the Windows operating system However you can restore the old status at any time from the backup Press y if you want an automatic restart of the computer after the recovery is completed Enter the password ippbx to start the process and confirm with Enter All the configuration and user data of the system will be lost in this Process The restore is begun The message Process complete will subsequently appear If you did not select automatic restart of the computer Step 5 press Enter to restart the computer The Windows operating system has been reset to the delivery state Index A Administration Desktop link 10 B Backup Create 20 Delivery status 20 Restore 20 C Configuration
5. 00 ohm linetermination for SX2 QuadBRI If an ISDN card or a connection is to be used differently from the standard configuration the card must be removed and reconfigured For detailed information on the cable assignment please see the Administrator Documentation chapter ISDN Connections 12 gt Installation of the ISDN card s 4 1 2 Option Power supply in NT mode for SX2 QuadBRI 4 2 ISDN devices which are intended for supply from the public line can also be connected to a SX2 QuadBRI which operates in NT mode Swyx offers an internal or external feed module as an additional component for this The feed module is attached to the SX2 QuadBRI in NT mode For further information on the SX2 QuadBRI please refer to the SwyxWare administrator documentation Installation of the software for the ISDN card After the initial startup the drivers for the ISDN cards are installed This installation takes place automatically in background and no further parameters are requested After the installation all SX2 cards present are created as individual network cards in the computer management In the default setting the card drivers are configured for a multiple subscriber connection This configuration is typical for an SX2 QuadBRI For information about configuring SX2 SinglePRI and SX2 DualPRI for a single line please refer to the section below see This is how you configure the ISDN driver for a single line page 13
6. SWUOH SwyxExpress X75 X150 The complete solution for your corporate communications As of December 2011 2000 2011 Swyx All rights reserved Legal Information Whilst Swyx attempt to convey accurate and current information relative to the creation of SwyxWare and this documentation the information provided in this user guide may contain typographical or technical errors This documentation including all information contained herein is provided as is without any warranty of any kind whether expressed or implied including but not restricted to any implied warranties of merchantability or fitness for a particular purpose or non infringement Trademark Swyx and Swyxlt are registered trademarks of Swyx All other trademarks and product names are trademarks or registered trademarks of the respective owners This documentation is proprietary intellectual property of Swyx Reproduction adaptation or translation of this documentation without the express written consent of Swyx is prohibited and will be prosecuted as a violation of intellectual property rights Swyx Solutions AG Joseph von Fraunhofer Str 13a D 44227 Dortmund G oe su rH Content 1 What is SwyxExpress X75 X1508 ee ee se ee eed 3 K R EE EE EE EE 3 1 2 Scope of supply ie ee Ge ee ee be be be ee ee ee ee ee 4 1 3 Installation OVErvieW s sesse RE EK GEE Es RE AG 4 2 Windows StaFlUD iese eek kies de gebak Ee dese gek se 7 3 Finding your way aro
7. Server Further settings 17 Necessary settings 17 SwyxWare 16 Configurations Wizard Server 16 Configuring a trunk 17 D DECT 18 Deletion of the backup Password 22 Delivery status 22 Desktop links 10 E E mail transmission 18 Enter public numbers 17 F Faxmail 18 G Group 27 All 18 Sales 18 Support 18 H Hardware additional 18 Installation by script 16 Initial 16 Overview 4 IP telephone 18 ISDN Line 14 ISDN Card Software 13 ISDN trunk 17 L License Permanent 19 Request 19 Windows 8 Licensing 19 M Mail server 18 N NT mode Configuration in ISDN driver 15 P Password 8 Deletion of the backup 22 28 S Scope of supply 4 Sending e mails 18 Server Settings Necessary 17 Optional 18 Set up telephone connection 17 SIP Enter parameters 17 SIP trunk 17 Status Window Desktop link 10 SwyxDECT 800 18 Swyxlt 18 SwyxPhone 18 SwyxWare Configuration Desktop link 10 SwyxWare administration Desktop link 10 SwyxWare CD Desktop link 10 SwyxWare documentation Desktop link 10 SwyxWare license 19 SX2 QuadBRI Pre configuration 13 T Telephone 18 Trunk 17 U User 17 Conference 18 Create 17 MobileExtensionManager 18 Operator 18 V Variants 3 Voicemail 18 Ww Windows Computer name and administrator password 8 Initial operation 7 License 8 License conditions 8 Product key 8 Regional and Language Options 7 Windows License 19
8. SinglePRI e TE mode e NT mode plugged in SX2 1 SX2 Termination Termination SinglePRI is Sync QuadBRI active active Master e Sync Master gt Installation of the ISDN card s 11 1 SX2 2 Both For standby DualPRI controllers in only TE mode 1 SX2 6 SX2 DualPRI SX2 QuadBRI For standby DualPRI Both e NT mode only 1 SX2 controllers in e Termination Sync cable OuadBRI TE mode active plugged in SX2 DualPRI is Sync Master The use of an SX2 DualPRI is only released within a master standby scenario as otherwise the permitted number of channels will be exceeded TE mode means for SX2 DualPRI all jumpers of the field SB2 are inserted above all jumpers of the field SB5 are inserted on the right for SX2 SinglePRI all jumpers of the field SB2 are inserted on the left all jumpers of the field SB5 are inserted on the right e Cable assignment Use the supplied ISDN cables here The card s and the supplied cables are assigned to match one another For detailed information on the cable assignment please see the SwyxWare Administrator Documentation chapter ISDN Connections e Standby support SX2 DualPRI only The jumper is inserted so that a standby configuration is possible with this card Automatic assignment of card number The card s are configured for automatic card number assignment Termination 120 ohm line termination for SX2 PRI DualPRI 1
9. You can check whether the installed ISDN cards function properly by using the supplied utilities For further information please refer to the SwyxWare Administrator Documentation Appendix Tools amp Traces If you want to change configuration parameters of the SX2 card you can find the properties of the card in the computer management under Computer Properties Device Manager Network adapters lt SX2 card gt For further information please refer to the SwyxWare Administrator documentation 4 2 1 Configuration of the SX2 SinglePRI SX2 DualPRI for a single line If you want to operate the SX2 card on a single line this still has to be configured in the properties of the card gt Installation of the ISDN card s 13 This is how you configure the ISDN driver for a single line Open the properties of the card in the computer management under Computer Properties Device Manager Network adapters lt SX2 card gt PF zr Enter the appropriate settings under Properties Select ISDN Parameters on the Advanced tab Select the Port tab in the dialog which is displayed RA Pr To switch to a line configured for direct dialing in please choose Point to Point and close both this tab and the previous tab by clicking on OK 4 2 2 Configuration of the SX2 QuadBRI for NT mode If you want to operate the SX2 QuadBRI card in NT mode e g with a subsystem the NT mode must eventuall
10. art now The computer is then restarted and the startup screen will appear 13 Select Normal Start The installation wizard will open 14 Press Ctrl Alt Del and enter the administrator password The desktop opens up with a number of links already created see chapter 3 Finding your way around page 9 Proceed with the configuration of the SwyxServer see chapter 5 Configuration of SwyxServer page 14 Please note that you have to activate the system at Microsoft within the following 3 days Please make certain that the most up to date Service Pack from Microsoft is installed when using the Windows system Install the security updates provided by Microsoft on a regular basis gt Finding your way around 3 Finding your way around You will find the server status System Information and Services listed directly on the SwyxExpress desktop Various links are also stored here SwyxWare Documentation The PDF SwyxWare Administrator Documentation opens up SwyxWare Configuration SwyxWare_DVD Starts the SwyxWare Configuration Wizard see chapter 5 2 Settings of SwyxServer page 15 Directory containing all files of the SwyxWare DVD SwyxWare Administration lowing links you will find on the desktop after installation Configures the SwyxServer s properties also users trunks etc Configures the properties of SwyxFax Server Status Window Reports on the SwyxServer s
11. ation a copy of the backup file space on the USB storage medium or the network drive ze Each copy of the backup file is stored under a unique name which 7 contains the date and time of creation Express_Backup_YYYYMMDDHHMiMiSS gzaa Y year M month D day H hours Mi minutes S seconds gt SwyxExpress Backup and Restore 21 Alternatively the unconfigured delivery state can be restored see chapter 7 3 Restore Factory Default for operating system page 24 su This is how you back up your SwyxWare installation de 1 Restart the computer The startup screen will appear 2 Choose Backup and Restore and confirm your selection with Enter When backing up you can choose from the following options 1 Create local Backup The SwyxWare installation is saved on the hard disk 3 Create Backup and copy to USB media The SwyxWare installation is saved on the hard disk and a copy of the backup file is transferred to an external USB storage device 5 Create Backup and copy to Network share The SwyxWare installation is saved on the hard disk anda copy of the backup file is transferred to a shared network directory 0 Cancel The computer is restarted 3 Press the corresponding number key to select the option you want and confirm with Enter 4 Connect the USB storage device to a USB port on the computer if you have selected option 3 5 Press y if you want an automatic restart of the
12. ck on Next gt Windows Startup 7 5 Product key Enter the product key You will find the product key directly on the label on the SwyxExpress case Click on Next The license conditions are displayed 6 License conditions Activate the checkbox I accept the license conditions and click on Start 7 Computer name and administrator password Set the administrator password and enter the new password a second time to confirm it Please note the following criteria for entering a secure password A A password should have at least eight letters Use upper and lower case as well as digits and or non alphanumeric characters Click on OK You will be reminded that you changed the password Click on OK The desktop will be prepared this may take several minutes 8 Then you will be asked to change the computer name This message will appear every time you restart the computer until you changed the computer name Click on Yes The window System Properties will open 9 Click within the tab Computer name on Change and change the computer name Enter also the workgroup or the name of the domain Confirm the entries with OK A gt Windows Startup 10 The computer must be restarted in order for the changes to go into effect Click on OK 11 Click on Close to close the System Properties window 12 Confirm the restart by clicking on Rest
13. copy of the backup file is created on the USB storage device or in the network directory gt SwyxExpress Backup and Restore 23 su This is how you restore a backed up SwyxWare installation 1 2 Restart the computer The startup screen will appear Choose Backup and Restore and confirm your selection with Enter For the recovery you can choose from the following options 2 Restore local Backup The local backup of the SwyxWare installation is restored 4 Select Backup from USB media and Restore A copy of the SwyxExpress backup on the USB storage medium can be selected and restored 6 Select Backup from Network Share and Restore A copy of the SwyxExpress backup in the network directory can be selected and restored 0 Cancel The computer is restarted Press the corresponding number key to select the option you want and confirm with Enter If you have selected option 4 connect the USB storage device with the backup files to a USB port on the computer We Press y if you want an automatic restart of the computer after the recovery is completed If you selected option 6 you will be asked for the computer name share name and the network login username and password Enter the necessary information domain name FQDN 6 If necessary enter the computer name with the fully gualified DNS e g Computername as FQDN computer 01 server net If necessary enter the user name plus
14. current activities D Channel Monitor Checks the function of the ISDN boards For further information please refer to the SwyxWare Administrator documentation 10 4 1 gt Installation of the ISDN card s Installation of the ISDN card s SwyxExpress can be equipped with a maximum of two SX2 cards according to customers requierements Pre configuration of the SX2 ISDN cards The SX2 ISDN cards have been configured to the default settings before being inserted in the computer with the help of the jumpers and DIP switches If these settings do not correspond to the configuration you need you will have to alter them To do this you must shut down the system and disconnect it from the power supply You can then configure the cards according to the directions in the SwyxWare Administrator Documentation chapter ISDN Connections The operating mode TE NT and the bus termination must be configured for each ISDN connector before insertion 4 1 1 Overview of the ISDN card combination and settings SwyxExpress X75 X150 can contain various ISDN cards Depending on the combination you will find the following default settings none 0 1 SX2 4 e TE mode OuadBRI e Termination active 2 SX2 8 e TE mode e TE mode no sync cable OuadBRI e Termination Termination plugged in active active 1 SX2 1 e TE mode SinglePRI e Termination active 1 SX2 5 PRI SX2 QuadBRI Sync cable
15. desktop link You will find detailed G information about the Configuration Wizard in Chapter 3 4 2 Configure SwyxWare page 117 By clicking on the desktop link SwyxWare configuration you will start a script Due to administration rights the user account control asked you to confirm the execution of the script The SQL database server will be installed automatically The wizard guides you through the configuration of SwyxServer asking you for all necessary parameters such as location and licenses Please confirm the default parameter of the wizard Mostly you don t need a domain account for SwyxServer so please let the wizard create a local account Further information about the required parameters you will find in the SwyxWare administrator documentation chapter 3 4 2 Configure SwyxWare which you can open via the desktop link Then before startup please create users and trunks For further information please refer to chapter5 2 Settings of SwyxServer page 15 Please have the SwyxWare licenses ready They will be required during A the configuration gt Configuration of SwyxServer 15 5 2 5 2 1 Settings of SwyxServer To enable the operation of SwyxWare further customer specific settings must be selected after the initial configuration Start the SwyxWare Administration from the desktop link for this For further information please refer to the SwyxWare Administrator documentation What follows here is pur
16. ely a brief overview of the necessary settings after which at least a first test operation is possible and then a summary of further possible settings Essential settings The following parameters must be configured before the initial operation Calls are subsequently possible from a created user to the public telephone network For further information please refer to the SwyxWare Administrator documentation Trunk Shortcut A trunk is the connection to the outside world menu Trunks e ISDN Trunk Add Trunk for the connection to the public network The public numbers of the ISDN connection are also entered here e SIP Trunk for the connection to a SIP provider Here you enter the parameters you ve got from the provider User Shortcut A user can initiate a telephone connection menu User JA wizard asks for all necessary parameters Add User 16 gt Configuration of SwyxServer 5 2 2 Further settings Special users and groups are already created during installation For further information please refer to the SwyxWare Administrator documentation User User list Preset with the number 0 Operator User User list Assigned internal numbers each representa Conference conference room User User list Manages the forwarding to mobile users MobileExtens ionManager Group Group list Contains all created users Everyone Group Sales Group list Preconfigured group Gr
17. he USB rescue media to a USB port on the computer 20 gt SwyxExpress Backup and Restore 4 Restart the computer A message appears Restoring delivery state of hard disk Do you want to proceed Press y to confirm you want to proceed Press y if you want an automatic restart of the computer after the recovery 7 Press y to confirm you want to proceed All data on the hard disk will be lost The restore is begun and may take considerable time When the operation is finished this message appears Hard disk restored successfully to delivery state Do not disconnect the USB rescue media until the computer restart has begun 8 Restart the computer 9 Afterwards you can restore the SwyxWare installation see chapter 7 2 Back up and Restore SwyxWare Installation page 20 7 2 Back up and Restore SwyxWare Installation After you have installed SwyxWare and configured it for your needs you can back up the complete installation The backup saves not just the database which contains most of the parameters but the complete Windows partition including the operating system configuration Copies of the backup files can be stored on an external storage medium or in the network The backup should be done at regular intervals of time so that there are always multiple system snapshots available for recovery can amount to several gigabytes Make sure there is enough memory Depending on the SwyxWare configur
18. oup Group list Preconfigured group Support Mail server In order for voicemails or faxes to be sent from SwyxWare a mail server is needed Configure the mail server to be used under Server Properties Mail Server 5 3 Installation of SwyxIt Other SwyxWare components such as Swyxlt inclusive SwyxFax Client are not preinstalled You can find these via the desktop link SwyxWare DVD 5 4 Further Components like SwyxPhone SwyxDECT 800 SwyxWare offers a range of other hardware components which you can install in your network including various models of the SwyxPhone range as desk telephones or the connection of DECT devices via SwyxDECT 800 For further information please refer to the SwyxWare Administrator documentation gt Licensing 17 6 Licensing 6 1 Windows License The Windows operating system license was already input during the initial startup Please note that you have to activate the system at Microsoft within A the following 3 days Please make certain that the most up to date Service Pack from Microsoft is installed when using the Windows system Install the security updates provided by Microsoft on a regular basis 6 2 SwyxWare License During startup you input a temporary SwyxWare license For the validity period please refer to the start page of the SwyxWare Administration You will find the date of expiration behind the serial number of the server In the server properties on the License
19. re Configuration Wizard will be started Here you enter specific data such as location public numbers etc For further information please refer to chapter 5 Configuration of SwyxServer page 14 5 SwyxWare Administration Start the administration from the desktop link After the SwyxWare is configured you can create users and trunks For further information please refer to chapter 5 2 1 Essential settings page 15 6 Swyxlt and SwyxPhone For further information please refer to chapter 5 3 Installation of SwyxIt page 16 Please see the SwyxWare administrator manual for how to install the telephony clients this is available as a link on the desktop 6 gt Windows Startup 2 Windows Startup Now you start the operating system Microsoft Windows Server 2008 R2 Please have your Windows Server 2008 R2 license ready You will find At license key on the label on the computer case su This is how you start Windows Server 2008 R2 de On delivery the computer is also configured for remote access 1 You should attach the screen network cable mouse and keyboard before the initial startup 2 Start the computer The startup screen will appear Backup Current State SWOR Wits 3 Select Normal Start After a few minutes the window Configure Windows will appear 4 Regional and Language Options Select the regional options such as country region time and currency as well as the keyboard layout Cli
20. s tab you can create a request for a permanent license and either send this directly or save it as a file and send it later Please fill in the license request completely not forgetting your A partner ID Error free license requests by e mail are processed automatically and your permanent license will be issued directly within a few minutes You then receive a file with a permanent license which you input in the SwyxWare Administration For further information please refer to the SwyxWare Administrator documentation 18 gt SwyxExpress Backup and Restore 7 SwyxExpress Backup and Restore You can e back up and restore the delivery state of the complete hard disk Create USB Rescue Media e back up and restore the current state of the SwyxWare installation with configuration and user data Backup and Restore e restore the delivery state of the Windows operating system Restore Factory Default Normal Start SWOR lt v WN 7 1 Back up and Restore Delivery State of Hard Disk USB Rescue Media In the steps that follow you create a bootable image clone of the complete hard disk in the delivery state The image is created on an external USB storage medium The data capacity of the USB storage media must be at least 8 A gigabytes You schould create a USB Rescue Media before the step Windows G Strartup The USB Rescue Media can also be created any time later on
21. stored on the hard disk and you will find a link to it on the desktop 1 Optional installation and configuring of the RAID controller If your system is equipped with a RAID controller please install the supplied drivers and software tools You will find the installation package in the folder CADrivers RaidController 3Ware_xxxxx Furthermore you may find the latest drivers and configuration tools on the internet pages of the original manufacturer http 3ware com support downloadpage asp http 3ware com support userdocs asp gt What is SwyxExpress X75 X150 5 2 Optional configuration of the SX2 ISDN cards If you wish to change the default configuration Chapter 4 1 Pre configuration of the SX2 ISDN cards page 10 please remove the board s now and configure them for your circumstances The driver of the choosed ISDN board s will be installed silently during the SwyxExpress installation For further information please refer to chapter 4 Installation of the ISDN card s page 10 3 Windows setup will be started from the start screen Enter the Windows license label on the case and the customer specific data such as time zone administrator password as well as the keybord layout For further information please refer to chapter 2 Windows Startup page 6 4 SwyxWare Configuration Start the configuration of SwyxServer from the desktop link The SQL database server will be installed automatically The SwyxWa
22. the domain where the user 7 account is registered e g Username domain user name server net 24 gt SwyxExpress Backup and Restore an 10 specify a subdirectory for the network share use G E g Share subfolder Users Public Backup 7 Confirm all inputs with Enter The list of backup files will appear 8 To select the backup file you want to use for the recovery press the corresponding number key 9 Confirm the selection with Enter 10 Enter the password ippbx to start the process and confirm with Enter gt All the configuration and user data of the current system including the local backup will be deleted when the delivery state is restored The backup file will be copied on to the SwyxExpress computer The SwyxWare installation is being recovered 11 If you did not select automatic restart of the computer Step 5 press Enter to restart the computer The Windows operating system is returned to the state it was in when the backup copy used for the recovery was created 7 3 Restore Factory Default for operating system You can reset the Windows operating system to the factory default The complete Windows partition is overwritten in the process state it will be necessary to begin with the startup of the Windows When the computer is started up again after the reset to the delivery operating system see chapter 2 Windows Startup page 6 Make regular copies of the backup files
23. und ee ee ee see se ee ee ee ek Ge ee 10 4 Installation of the ISDN card S Ee ee 11 4 1 Pre configuration of the SX2 ISDN cards see 11 4 1 1 Overview of the ISDN card combination a d dl OE OR ER 11 4 1 2 Option Power supply in NT mode for SX2 OuadBRI ese ee ee ee ee ee 13 4 2 Installation of the software for the ISDN card 13 4 2 1 Configuration of the SX2 SinglePRI SX2 DualPRI for a single line ee se se ee ee ee 14 4 2 2 Configuration of the SX2 QuadBRI for NT mode 15 5 Configuration of SwyxServer ie ee eee 16 5 1 Initial Configuration of SwyxServel ee ee ee ee ee 16 5 2 Settings of SMAKSEVER di ed ei ge og 17 5 2 1 Essential setting eise ee ee ee ee ER ee ee ee Re ee ee 17 5 2 2 Further settings uses ee ee ee ee ee ER Re Ee ee ee ee Re ee ee 18 3 3 Installation of Swyxlt ss ENE EG Re sivas 18 5 4 Further Components like SwyxPhone SWYXDECT BOD este Ee Seta since N ED Ng 18 EE Es EE RE EE OO On OP TOT 19 6 1 Windows License is ee noe Ee oge ie 19 62 BWVKVV Ale LicensE it EE es n EG 19 7 SwyxExpress Backup and Restore ie ee ee ee 20 7 1 Restore Factory Detdult ste dese iN 22 gt What is SwyxExpress X75 X150 3 1 What ts SwyxExpress X75 X150 SwyxExpress X100 and SwyxExpress X150 provide the software based Unified Communication solutions of Swyx as a complete package Here you will find SwyxWare that has already been preinstalled on a suitable hardware platform
24. y be configured in the properties of the card configured before insertion To find out how the card in your SwyxExpress variant is pre configured please refer to Chapter 4 1 Pre configuration of the SX2 ISDN cards page 10 Note that the jumpers on the card must also be correspondingly For detailed information on the cable assignment please see the SwyxWare Administrator Documentation chapter ISDN Connections This is how you configure the ISDN driver for NT mode z 1 Open the properties of the card in the computer management under Computer Properties Device Manager Network adapters SX2 QuadBRI card Enter the appropriate settings under Properties Select ISDN Parameters on the Advanced tab Select the Port tab in the dialog which is displayed we p e To switch to operation in NT mode please choose NT side and close both this tab and the previous tab by clicking on OK N iy 14 gt Configuration of SwyxServer 5 Configuration of SwyxServer SwyxExpress already contains a pre installed SwyxServer version and the associated database After the startup of the operating system see chapter 2 Windows Startup page6 and the installation of the ISDN card drivers see chapter 4 Installation of the ISDN card s page 10 the configuration and licensing can now take place in the SwyxWare Administration 5 1 Initial Configuration of SwyxServer Ze Start the SwyxWare from the

SwyxExpress X75/X150

Contents

Download Pdf Manuals

Related Search

Related Contents