Ledheimer User-Manual 1.3.00
Contents
1. 4 Dimmer 255 100 Coarse dimming 8 Bit 1 Dimmer 255 100 Dimming w Strobe 2 Strobe 0 5 mode 6 125 1 49 Slow to Fast Strobe 126 130 50 Open 131 250 51 99 Slow to Fast Random 251 255 100 Open 3 Strobe O 100 Short to Long Flash length 16 Bit 1 Dimmer 255 100 Coarse dimming 2 Dimmer 255 100 Fine dimming 16 Bit 1 Dimmer 255 100 Coarse dimming w Strobe 2 Dimmer O 255 100 Fine dimming 3 Strobe 0 5 mode 6 125 1 49 Slow to Fast Strobe 126 130 50 Open 131 250 51 99 Slow to Fast Random 251 255 100 Open 3 Strobe 100 Short to Long Flash length Note Beware when using Strobe Lenght that if the Strobe Lenght is egual to or longer than the flash and interval between flashes the unit will not strobe If maximum strobe length is used the fastest strobe possible will be 17 796 WWIiW BROTHERS SONS DK 4 4 LEDHEIMER USER MANUAL Software vers 1 00 SOFTWARE MENU Default values indicated by bold font Addr 1 DMX adress value 1 512 Mode Resolution 8 bit resolution 16 bit resolution Response Slow fade between values Fast snap between values Strobe OFF On adds 2 strobe channels Curve Square dimmer curve Linear dimmer curve Fan HIGH No fan speed limit LOW Fan speed limited Silent noDMX Action when loss of DMX signal HOLD last received DMX value OFF Sets output to zero MAN Go to Manua2. Go to www brothers sons dk for the latest version 1 WWIiW BROTHERS SONS DK LEDHEIMER USER MANUAL CONTENTS 1 2 Safety nnd 3 A A 3 Product VEIS a 4 Single Yoke meme eee e eene he eese ne en nne nnde 5 Yoke Array Assembly issssss emen herren eene nr nn nere re n eee 6 First Time Usage m e e eene enema sn nnns 9 A 10 DMX Data Link 10 Software ehe ee eene rne ere ne nene nea adea eene end 10 DMX Protocol ether tt hen ones e sexa d te PAARE 11 Software MenU A 12 Trouble Shooting FAQ He e ee ene ene se nans 14 Specific ia o idad 15 WWIiW BROTHERS SONS DK LEDHEIMER USER MANUAL SAFETY Safety Notice It is important to read ALL safety information and instructions in this manual before install ing and operating the product described Safety symbol used in this manual A WARNING Potential injury or damage to persons or product A WARNING It is important to read ALL safety and installation instructions to avoid any damage to the product and potential injury to yourself and others This product is for professional use only and has been
3. designed for indoor use Exposure to moisture may cause damage to the product and will void your warranty This fixture is designed for use with a specific LED only Use of any other type LED may be hazardous and may void warranty Do not operate the product if the ambient temperature exceeds 40 104 F Provide a minimum clearance of 0 1m 4 in around fans and air vents Do not mount on flammable surface Ensure that the fixture is electrically connected to ground earth Only use this product if all cables connectors and the product itself are undamaged Damage caused by inadequate cleaning or maintenance is not covered by the product war ranty This is a product using High power LEDs Do not stare directly into the LED at extended periods of time at a short distance without suitable protective eyewear Do not look directly at the LED with optical instruments that concentrate the light output No matter the light source blue light depending on the wavelength can be harmful to your eyes SERVICE Servicing is to be performed only by qualified personnel Take precautions to avoid ESD damage during service Disconnect the power before servicing the product MAINTENANCE This product requires very little routine maintenance if any but has special cleaning instructions Disconnect fixture from power and allow it to cool for 10 min Vacuum or gently blow away any dust from fan blades and grills Very gently clean the LED with
4. to Adress mode Addr and set the desired adress resolution response strobe curve settings and in Personality PErS set the desired Fan No DMX and Display settings refer to the Software Menu and DMX Protocol chapters Connect to DMX controller refer to the DMX Protocol chapter Use it WWiW BROTHERS SONS DK LEDHEIMER USER MANUAL AC Power This fixture must be connected to ground Electrical AC Power 100 240 V nominal 50 60 Hz Powersupply Electronic switchmode Max power consumption 132 w DMX Data link This product uses a 5 pin XLR for dmx input and output Use shielded data cables Do not overload the daisy chain Up to a maximum of 32 devices can be used on a single dmx chain DMX Channels 1 at 8bit Dimmer 2 at 8bit Dimmer w strobe 2 at 16bit Dimmer 3 at 16bit Dimmer w strobe Protocol USITT DMX512 A SOFTWARE UPDATE Software can be updated via DMX512 with UPLOADER from Brother Brother amp Sons ApS and the latest software version can be found on www brothers sons dk WWIiW BROTHERS SONS DK 4 O LEDHEIMER i 1 USER MANUAL Linear curve on Indicator Response fast indicator Strobe on Indicator 8 bit Indicator DMX present indicator 0000 ENTER UP DOWN MENU Open menu Go back ENTER Select Confirm UP Scrolling UP Increase value DOWN Scrolling DOWN Decrease value DMX Channels Mode Channel Parameter Value Percent Function 8 Bit
5. Isopropyl alcohol Clean the lenses with a soft damp cloth POWER Never connect to dimmer power WWiW BROTHERS SONS DK USER MANUAL LEDHEIMER PRODUCT OVERVIEW l iu a AW PowerCon IN DMX IN DMX OUT PowerCon OUT 238 70 mm 9 39 284 mm 11 18 L gt za A Leal 185 50 mm 6 24 200 mm 7 87 H Li B ejt Will IN d 185 50 6 24 233 65 mm 9 20 WWiW BROTHERS SONS DK LEDHEIMER USER MANUAL SINGLE YOKE ASSEMBLY Slide the fixture in to the yoke and insert the four ballpins WWIiW BROTHERS SONS DK LEDHEIMER USER MANUAL YOKE ARRAY ASSEMBLY Place the sidemounts on the top and side or bottom and side refer to illustration above Insert ballpins in the the positions as shown Note that when inserting ballpins to interlock two Ledheimers only one ballpin is used on the side in question and always the one closet to the front These symbols mark the unused mounting holes The ballpins mark
6. LEDHEIMER USER MANUAL gt BROTHER BROTHER SONS ApS NS LEDHEIMER USER MANUAL INTRO Brother Brother amp Sons ApS The information in this manual is subject to change without notice Go to www brothers sons dk for the latest version Brother Brother amp Sons ApS assumes no responsibility for any errors or inaccuracies that may appear in this manual All information and graphics are the property of Brother Brother amp Sons Aps User Manual Version December 2011 Customer and Warranty service Contact your regional dealer Contact information for your area can be found at www brothers sons dk RMA When returning an item please enclose a Model and Serial number b A description of the problem c The name of the owner of the equipment d If available please include a copy of your invoice to establish the date of sale and the beginning of the warranty period Disposing of this product Help preserve the environment Ensure that this product is recycled at the end of its life This product is in compliance with the RoHS and WEEE directives In compliance with EMC standards EN 55103 1 8 EN 55103 2 EN 55022 EN 55103 1 Annex A EN 55022 EN 61000 3 2 EN 61000 3 3 EN 55103 1 EN 61000 4 2 EN 61000 4 3 EN 61000 4 4 EN 61000 4 5 EN 61000 4 6 EN 55103 1 Annex B EN 55103 1 Annex A EN 61000 4 11 Brother Brother amp Sons ApS The information in this manual is subject to change without notice
7. ed with a dotted circle comes with the Ballpin mounting plates WWiW BROTHERS SONS DK 6 LEDHEIMER USER MANUAL YOKE ARRAY ASSEMBLY Mount each mounting plate using 4 hex screws and 4 washers as illustrated Washer But do not tighten them yet Hex screw T SE REIS WWiW BROTHERS SONS DK USER MANUAL LEDHEIMER YOKE ARRAY ASSEMBLY Before tightening the screws that connects the fixtures to the mounting plates you will need to position the fixtures accord ing to the illustrations and your desired setup f Angled Parallel WWiW BROTHERS SONS DK LEDHEIMER USER MANUAL INSTALLATION A Do not operate the product if the ambient temperature exceeds 40 C 104 F Provide a minimum clearance of 0 1m 4 in around fans and air vents This fixture must be connected to ground This fixture is for indoor use only Read the Safety and Specifications chapters first Applying power Never connect to dimmer power Make sure the local power voltage is within the range specified If so connect a power cable and turn the power on Standalone operation Using the navigation buttons and display readout refer to the Software Menu chapter navigate to Manual and set the desired intensity additional operations see Software Menu chapter DMX operation Connect a DMX cable Navigate
8. l DMX value Display OFF 2n Display off after 2 minutes ON Display always on Tools Ver Shows software version READOUT ONLY HW Ver Shows hardware version READOUT ONLY Temp LED temperature READOUT ONLY DMX In 3 first digits shows DMX adress READOUT ONLY 3 last digits shows DMX value READOUT ONLY Reset Confirm Reset unit by pressing enter test Fan Fan test First 2 digits set fan speed level O 31 Last 3 digits RPS rounds per second READOUT ONLY test display Display test all seven segments of each digit on READOUT ONLY continues on next page WWiW BROTHERS SONS DK LEDHEIMER USER MANUAL Software vers 1 3 00 SOFTWARE MENU continued Default values indicated by bold font Log Max Fan Maximum fan speed logged in RPS READOUT ONLY Fan RPS Current fan speed in RPS READOUT ONLY EEProm Developer info LED U LED voltage in Volts READOUT ONLY PSU U PSU voltage in Volts READOUT ONLY LED int for troubleshooting READOUT ONLY Log C Minimum and maximum logged temperature in UP and DOWN scrolls min and max on time PSU on time in hours READOUT ONLY on LED LED on time in hours READOUT ONLY Demo Developer info DMX HZ DMX refresh rate READOUT ONLY DMX CH No of DMX ch transmitted by controller READOUT ONLY DMX br Break lenght of DMX in microseconds READOUT ONLY LED EE Developer info Manual 0 Manual intensity O 10096 Intensity saved when pressing ENTER Display is always on in man
9. ual mode WWIiW BROTHERS SONS DK LEDONARDO 1 USER MANUAL FAQ TROUBLESHOOTING Problem Possible Cause Solution Brother Brother amp Sons ApS The information in this manual is subject to change without notice Go to www brothers sons dk for the latest version WWiW BROTHERS SONS DK LEDHEIMER USER MANUAL SPECIFICATIONS Physical Depth 234 mm 9 20 Width 239 mm 9 39 Height 284 mm 11 18 Weight 4 8 kg 10 58 Ibs Data DMX Channels 1 or 2 at 8bit e or 3 at 16bit Protocol USITT DMX512 A Electrical Never connect to dimmer power AC Power 100 240 V nominal 50 60 Hz Powersupply Electronic switchmode Max power consumption 132 W This fixture must be connected to ground Thermal Maximum ambient temperature t Amb 40 104 F Cooling t Case temperature as shown in display Below 64 C 147 2 F Convection cooled Above 64 C 147 2 F Forced silent fan cooling Above 70 158 F Forced dimming Above 73 163 4 F Forced Lamp Off Accessories Uploader BBS Software Uploader City Theatrical Tophat AC Lighting 2402 CCT Minuette barndoor AC Lighting ZOB46 City Theatrical colorframe AC Lighting 23002 Specifications subject to change without notice For the latest specifications see www brothers sons dk WWiW BROTHERS SONS DK 4
Download Pdf Manuals
Related Search