Home

electrolux_232218_usermanual

1. AGITATOR 025 rpm To continue cooling towards temperature Press START SV6I SP6I only Switch off in the following way the adjusted 18 Press STOP 8 For unlimited cooling Switch off the pan manually in the following way Press STOP 8 The following question appears in the display INTERRUPT YES PRESS STOP PRESS START NO e Press STOP 8 the red LED goes out SV6I SP6I only After STOP the boiling pan will empty the refriger ant Do not turn off the machine while draining is progressing approx 3 minutes EN 02 2015 e Confirm the selected option by pressing Menu forwards 3 once e Repeat step 1 The following text appears in the display if the mat temp sensor option has been selected COOLING SET TEMPERATURE e Press Increase value 6 and the cooling temper ature Increases hotter If _ appears this means unlimited cooling the only option without mat temp sensor e Press Decrease value 6 and the cooling tem perature decreases colder e Repeat step 4 The following text appears in the display COOLING h min XXX C WATER XXX XXX AGITATOR 000rpm When this appears in the display the machine can pe started by 19 Pressing START 7 The cooling starts now if the mat temp sensor op tion has been selected When the correct cooling temperature has been reached the red LED goes out a buzzer sounds for 2 minutes and the display
2. OPERATING INSTRUCTIONS BOILING PAN 600 mm TILTING HEIGHT SMART SMART VARIOMIX SMART PROMIX HEAD BEFORE USE DOC N STO 9184 02 EDITION 2 EN 12 2014 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN WERE THINKING OF YOU Thank you for choosing an Electrolux product This is a product that comes with decades of pro fessional experience and innovation a sophisticated product that is intelligently designed and de veloped with your needs in mind You can be sure that every time you use this product the results will be outstanding Welcome to Electrolux CUSTOMER CARE AND SERVICE We recommend using only spare parts made by Electrolux Professional If you contact customer service please have the following documents to hand You can find the PNC and model number on the nameplate on your appliance Other documents concerning this product are available from the Customer Service Centre Service handbook Replacement parts catalogue Wiring diagram IMPORTANT Indicates dangerous situations that can lead to life threatening injuries NOTE Important instructions that must always be obeyed ENVIRONMENT Environmental information DII STEEL G Producer SteelTech i Alings s AB Larkvagen 4 SE 441 40 Alings s Sweden Phone 46 322 668930 Fax 46 322 10870E mail info steeltech se www steeltech se Original language Swedish These Installation and Operating Instructions relate to a range of ap
3. NOTE Boiling pans with the level control option regulates the water level in the vessel automatic ally There is no need to check the water level in the vessel 11 1 Safety valve A oafety valve B Manometer oteam trap D Meter tap for accredited authority at final inspection A properly functioning safety valve is an extremely important part of the pan s safety system oafety valve Fig 1 pos A opens automatically if the pressure exceeds 1 5 bar e Switch off the pan immediately and call in a qualified technician Warning If the safety valve Fig 1 pos A opens hot steam will blow out from the valve Regular checks of the safety valve should be performed by trained personnel We recommend once a week EN 02 2015 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 11 2 Checking of safety valve e iit the handle to allow the steam free passage through the safety valve Fig 2 pos A 1 and Fig 2 pos A 2 If you cannot get the valve to open blow it must be replaced immediately Call in a qualified techni cian 11 3 Manometer Manometer Fig 1 pos B measures the steam pres sure May not exceed 1 5 bars If the display goes into the red field e Switch off the pan immediately and call in a qualified technician A For the correct display of the pressure the green cap on the manometer can be lifted NOTE The green cap must be pressed in when the pan is tilted 11 4 Steam
4. e Press Decrease speed 42 to decrease the speed e Press Agitator stop 49 to stop the agitator 14 3 2 AGITATION WITHOUT GRID SMARTMIX This function is used to rotate the agitator when the grid is open and in the event of tilting e Press the pushbutton 42 and hold to rotate the agitator at 20 rpm e Release the button 7 and the agitator tool will Stop 28 DOC N STO9184 02 14 3 3 Preset agitator program There are 1 fixed agitator programs and 5 positions for own programs e Press Increase speed 49 once The following text appears in the display AGITATOR PROGRAM FIXED GENTLE STIRRING e Press Increase speed 49 until the appropriate program appears in the display When the program to be used appears in the display Press Agitator start 9 The agitator starts the selected program e The agitator stops automatically when the pro gram has finished e You can also stop the agitator with Agitator stop e Change to speed can be done in each program 14 3 4 Fixed agitator programs GENTLE STIRRING The fixed program GENTLE STIRRING is used to stir products gently such as hotpots The operating time is 2 minutes and the pause time is 5 minutes e Press Increase speed 49 until GENTLE STIR RING appears in the display e Press Agitator start 9 e Press Increase speed and the stirrer starts at the lowest speed of 25 rom e Press Decrease speed 42 to decrease the speed e Press Agitator s
5. The pan is not in working position Press Tilt return 44 The grid is fully or partly open Close the grid and press Agitator start 9 e Press On Off D The display goes out e Wait 5 seconds e Press On Off 4 Display lights If the warning is still lit e Press On Off D to close the pan The display goes out See Warning Overheating thorised personnel Overheating of heating element The heat will shut off in the event of a fault to the element sensor and contact au STOP 8 has been pressed dur ing operation Follow the instructions in the display e Press STOP 8 to stop or e Press START 7 to return to the program e Press On Off D The display goes out e urn the main switch to position O Wait for approx 1 minute e urn the main switch to position 1 e Press On Off 4 Display lights Increase agitator speed or reduce the amount Overloaded agitator of food in the pan Interrupt in PT 1000 sensor Contact authorised personnel Short circuit in PT 1000 sensor Contact authorised personnel Interrupt in PT 1000 sensor Contact authorised personnel Short circuit in PT 1000 sensor Contact authorised personnel Fault in water meter Contact authorised personnel or no water in to the pan piss to interrupt the manual wa ter filling Manual water filling in progress Attained service intervals Order service by authorized personnel EMERGENCY STOF The emergency
6. e Avoid physical damage to the stainless steel sur face especially with other metals If stainless steel comes into contact with iron wire wool EN 02 2015 DOC N ST091 84 02 OPERATING INSTRUCTIONS SMART LINE BOILING PAN swarf from cables iron rich water this can lead to corrosion 9 2 Suitable cleaning products e For environmental protection reasons it is recom mended that the appliance is cleaned only with products which are more than 9096 biologically degradable ENVIRONMENT Help protect our environment The appliances must be cleaned with commercially available food compatible cleaning agents No bleaching chlorine based highly flammable gran ular or abrasive cleaning agents must be used to clean the appliance 9 3 Cleaning the appliance AN e Before cleaning the appliance must be discon nected from the power supply and cooled down completely to avoid the risk of scalding or elec tric shock IMPORTANT Danger of fire explosion and death e Do not clean the appliance with flammable li quids Clean the appliance after each use The surfaces of our appliances must be washed with hot water and mild detergent After cleaning the surfaces must be thoroughly rinsed with water and rubbed dry Accessories such as tools and strainer plates must be cleaned outside of the appliance e not spray the appliance or its parts with high pressure cleaner or a steam cleaner thi
7. 17 1 Agitator tool Variomix Gate agitators are used to mash mix or whip the contents of the pan You can use the gate agitator with or without scrapers The scrapers are used to avoid certain food pro duce sticking 17 2 Agitator tool Promix Promix propeller is used to pulp mix or whip the contents of the pan Bottom agitator is attached to the Promix agitator to process light and or smaller amounts of food produce more efficiently The baffle plates are used to avoid splashes from low viscosity food 17 3 Supplementary equipment and accessories 17 3 1 Smart Accessories otrainer plate Cleaning brush short Oleaning brush long Equipment Measuring stick 17 3 2 Smart Variomix Equipment Accessories Gate agitator Strainer plate Measuring stick Cleaning tool Bottom scraper Bottom agitator Side scraper Whip tool Cleaning brush short Cleaning brush long 17 3 3 Smart Promix Equipment Accessories Propeller agitator Strainer plate Bottom agitator Cleaning tool Baffle plate Measuring stick Cleaning brush short Cleaning brush long 32 DOC N STO9184 02 18 AGITATOR MAINTENANCE The agitator bearing is filled with grease from the factory Refilling grease should take place during in stallation and then at least twice per year Grease filling should be performed by trained personnel e Use grease with high temperature properties Order Number ST8 00 24 00 e Grease should be pump
8. or press Decrease value 6 to decrease the temperature min 30 C e Confirm by pressing Menu forwards 3 once The following options appear in the display BOILING SET TIME h min Press Increase value 5 to set the required boiling time max 7h and 59 min or shorten the time by pressing Decrease value 6 DOC N STO9184 02 19 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN If the display shows h min this means that there is unrestricted time and the pan must be switched off using STOP 8 e Confirm by pressing Menu forwards 3 once The following settings appear in the display if the flow sensor option has been selected BOILING SET WATER XXX XXXL NOTE The settings do not work while manual wa ter filling is in progress 4 Press Increase value 5 for setting the number of litres of water to be filled If there is a value in brackets in the display this specifies how many litres of water have already been filled into the pan e Confirm by pressing Menu forwards 3 once The following settings appear in the display if the flow sensor and mat temp sensor options have been selected BOILING xh XXmin XXX C WATER XL To select the settings made without saving 5 Press Menu forwards 3 twice Continued from step 7 To save the settings that have just been made e Press Increase value 5 The following text appears in the display BOILING Xh XXmin
9. SPD TIME R XXX The letter means Reverse which means that the agitator goes in reverse function and pause There are two options to select N stands for No which means that the agitator only runsclockwise Or Y stands for Yes which means that the agitator runs In reverse e Confirm by pressing Menu forwards 3 once The figure 1 in the display changes to 2 SPD TIME R XXX XXX 2 OF 02 2015 e Press Increase value 5 once and the following text flashes SPD TME R XXX AKAK J PAUSE XX XX 1 e Confirm by pressing Menu forwards 3 The following text flashes SPD TIME R XXX XX XX J PAUSE XX XX 1 Press Increase value 5 to add a longer pause or press Decrease value 6 to shorten the pause Confirm by pressing Menu forwards 3 The figure 1 in the display changes to 2 SPD TIME R XXX XX XX_ J PAUSE XX XX 1 The following text flashes again ADJ AGITATOR PROGRAM 1 NAME SPD TIME HR PAUSE XXX XX XX X XX XX 2 Repeat the procedure from the beginning to add the different agitator values that are required This can be done three times in total The following text appears in the display ADJ AGITATOR PROGRAM 1 NAME SPD XXX X TIME R PAUSE XX XX 1 In order to select this program See Preset agitator program EN 02 2015 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 14 2 4 Name agitator program e Press Inc
10. Total power Voltage Frequency Max phase current PNC F Mod Kg h KW V neutral conductor Hz A 232218 SM6B50 400 V 3N 50 60 22 232219 SM6B100 225 400 V 3N 50 60 33 232220 SM6B150 30 400 V 3N 50 60 44 232221 SM6B200 OE S 400 V 3N 50 60 55 232222 SM6B300 50 400 V 3N 50 60 73 232223 SM6V50 58 400 V 3N 50 60 27 232224 SM6V100 24 400 V 3N 50 60 39 232225 SM6V150 400 V 3N 50 60 a 232226 SM6V200 39 7 400 V 3N 50 60 62 232227 SM6V300 522 400 V 3N 50 60 80 232228 SM6P100 24 7 400 V 3N 50 60 39 232229 S 522 400 V 3N 50 60 3 232230 SM6P200 40 5 400 V 3N 50 60 66 1111 53 400 V 3N 50 60 84 232232 SM6B508 24 0 2 230 V 1N 50 60 2 232233 SM6B100S 36 0 2 230 V 1N 50 60 2 232234 5 681505 47 Drs 400 V 3N 50 60 3 232235 SM6B200S 59 0 5 400 V 3N 50 60 3 232236 SM6B3008 78 0 5 400 V 3N 50 60 3 232237 SM6V50S 24 1 0 400 V 3N 50 60 7 232238 SM6V100S 36 7 400 V 3N 50 60 9 232239 SM6V150S A7 2 0 400 V 3N 50 60 9 232240 SM6V2008 59 20 400 V 3N 50 60 10 232241 SM6V300S 78 20 400 V 3N 50 60 10 232242 SM6P100S 36 2 4 400 V 3N 50 60 9 232243 SM6P150S 47 472 8 400 V 3N 50 60 9 232244 SM6P200S 59 3 6 400 V 3N 50 60 14 292245 SM6P3005 78 215 400 V 3N 50 60 14 EN 02 2015 DOC N ST091 84 02 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN omart Line boiling pans with dual connection Voltage Weight To
11. XXX C WATER XL o The number of a free program flashes in the display Other numbers that are not flashing are not se lected here See Changes in existing programs e Select this free program number by pressing Menu forwards 3 Tip Write down the program number rpm revolutions per minute 20 DOC N STO9184 02 13 4 Delayed start if the flow sensor and or mat temp sensor op tions have been selected If Delayed start has been deselected this menu is not shown see Page 18 Press Menu forwards 3 once The following text appears in the display DELAYED START SETTING TIME h min Press Increase value to add a longer delay to the start max 99h 59min or press De crease value 6 to shorten the delay If no delayed start is required OOh OOmin must ap pear in the display Confirm by pressing Menu forwards 3 once The following text appears in the display DELAY XXh XXmin Xh XXmin XX C WATER XXX XXX AGITATOR 000rpm 13 5 Load program if the flow sensor and or mat temp sensor op tions have been selected If programming has been deselected this menu is not shown see Page 18 The following text appears in the display BOILING Xh XXX C WATER XL RETRIEVE PROGRAM Press Increase value 8 or Decrease value 6 once The following text appears in the display BOILING xh XXX C WATER XL RETRIEVE LAST The last can be the
12. carried out when heating elements have cooled down e Any internal electrical wiring in the appliance and the connections to the earth cable are in ac cordance with the respective wiring diagrams and must not be modified All metal parts which have electrical connections on them must remain earthed e After completion of the maintenance and re pair work the service technician must carry out checks to ensure all operating modes of all functional and safety components are in ac cordance with the operating instructions 8 1 Maintenance periods Similarly constructed appliances are not under ob ligation to be certified They are subjected to a pres sure and function test at the factory in accordance with the relevant guidelines Depending on the frequency and intensity of use functional parts must be maintained and tested consistently at regular intervals However this must be at least once a calendar year EN 02 2015 9 CLEANING 9 1 Handling stainless steel The types of stainless steel used on industrial kit chen appliances are highly sophisticated tried and tested materials Thanks to its positive character istics stainless steel is an ideal material for prepar ing food The reason stainless steel can resist corrosion and rust is its passive layer which builds up when oxy gen hits the metal surface There is sufficient oxy gen in the air to do this If this passive layer is phys ically broken or damaged by che
13. flashes until the pan switches off To continue cooling towards the adjusted temper ature Press START 761 61 only The following text appears in the display BOILING h min XX G WATER XXX XXX AGITATOR XXXrpm owitch off the pan by 20 Pressing STOP 8 DOC N STO9184 02 23 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN For unlimited cooling without food temp sensor switch off the pan manually in the following way Press STOP 8 The following guestion appears in the display INTERRUPT YES NO PRESS STOP PRESS START e Press STOP 8 the red LED goes out 13 9 Changes in food preparation program if the mat temp sensor and flow sensor options have been selected The values in the food preparation programs BOIL ING BOILING HOLD or BOILING COOLING can be changed in the following way oad the program to be changed Load programs that are stored by e Pressing Increase value 5 until the program number appears in the display Tilt Write down the program number Confirm by pressing Menu forwards 3 e Enter the values to be changed e g temp boi lingtime water until the following text appears in the display XXXXXXX xh XXmin XXX C WATER XL e Press Increase value 5 until the program num ber to be replaced appears in the display e Press Menu forwards 3 once The following question appears in the display HEPLACE YES PRESS START
14. ing plate inside the appliance which you can see in calendar week 25 after removing the panels Third digit of the year in numbers 2014 For the exact identification of your appliance see Calender week 25 PNC Fourth digit of the year in numbers 2014 Definition of the data on the label Model Description of the boiling pan Max phaseload A Current Int code Internal code Prod year Production year Prod No Production code codes CE CE identification Ser No Serial number W WEEE symbol V Supply voltage phase Max Pressure Maximum operating pressure vessel HZ Mains frequency Min Pressure Minimum operating pressure Tot kW Maximum power consumption Max temp Maximum temperature On Motor power consumption Min temp Minimum temperature Steam consump Steam consumption Typ No Vessel production drawing number 5 CONSTRUCTION OF THE APPLIANCE The outer and inner structure parts of the overall The surface of the appliance is highly polished en appliance are made of high quality steel AISI 304 suring an excellent level of hygiene universal versat lity and making it easy to clean while preventing any mixing of flavours EN 02 2015 DOC N STO9184 02 11 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN GENERAL INFORMATION 6 PACKAGING ENVIRONMENT Help protect our environment All packaging materials used are environment ally friendly They may be stored without risk taken to a recycling centre or incinerate
15. program that was just saved The program number does not appear in the display e Press Increase value 5 or Decrease value 6 to display all stored programs 9 Press Menu forwards 3 to load the selec ted program e Repeat step If Programmed start is selected EN 02 2015 e Confirm by pressing Menu forwards 3 once The following text appears in the display DELAY XXh XXmin Xh XXmin XX C WATER XXX XXX AGITATOR 000rpm When this appears in the display the machine can pe started in the following ways 10 Press START 7 to start Red LED lights with a fixed light Delay to start starts to count down For use of agitator See Agitator When the countdown to start is ready or if delayed start has not been selected the following text ap pears in the display BOILING XXmin XXX C WATER XXX XXX AGITATOR 000rpm Boiling time starts when the set temperature has peen reached NOTE Temperatures above 100 C cannot be achieved and the countdown of the boiling time does not start When the boiling time is over the heating switches off The red LED goes out a buzzer sounds for 2 minutes and the display 2 flashes until the pan switches off which is done in the following ways 11 Press STOP 8 EN 02 2015 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 13 6 BOILING HOT KEEP if the mat temp sensor option has been selected BOILING BOILING HOT KEEP BOILING COOLING C
16. 04 ETS SAN EN SSS SX EN 02 2015 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 21 MAINTENANCE OF VESSEL BEARINGS The vessel bearings should be inspected and greased once a year Q Grease nipple 22 OTHER DOCUMENTATION Manufacturer s Declaration Installation Instructions Service Manual Spare Parts Catalogue Not supplied May be ordered from the supplier or the supplier s representative EN 02 2015 DOC N ST091 84 02 35 Electrolux Professional e 8 8 MODELS 222 22212 232220 232221 232222 232223 232224 252220 222268 252221 232228 2522022 232230 232231 202292 222 232234 232235 232236 232231 232238 20299 232240 232241 232242 232243 232244 232245
17. 1 Name agitator program e Press Increase speed 41 to select agitator program e Press Increase value 8 and STOP 8 simultan eously for 3 seconds The following text appears in the display e Press Increase value 5 or Decrease value 6 to select the suitable letter or number e Press Menu forwards 3 to move forwards to the next character position or press Menu back 4 to move back to the previous character Max 17 characters e Repeat until the program name is entered in the display e Press Increase value 5 and STOP 8 simultan eously for 3 seconds The new agitator program name appears in the display ADJ AGITATOR PROGRAM 1 XXXXXXXXXX PAUSE XXX 1 SPD TIME R XXX XXX X DOC N STO9184 02 29 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 14 5 Change values during operation The status of the pan appears in the display BOILING h min XXX C WATER XXX XXX AGITATOR 000rpm Temperature settings without going into the menu e Press Increase value 5 or Decrease value 6 to change the temperature directly without going to the menu Manual water filling e Press Menu forwards 3 once e Press Increase value 5 once Filling of water starts e Press Decrease value 6 once Filling of water Stops Temperature settings Boiling e Press Menu forwards 3 twice e Press Increase value 5 to increase the temper ature or press Decrease value 6 to decrease the temperat
18. EEP WATER XXX XXX AGITATOR 000rpm The time for hot keep is unrestricted and the pan must be switched off manually in the following way 14 Press STOP 8 The following question appears in the display INTERRUPT YES PRESS STOP PRESS START NO e Press STOP 8 the red LED goes out 22 DOC N STO9184 02 13 7 BOILING COOLING if the Jacket cooling and mat temp sensor options have been selected BOILING BOILING HOT KEEP BOILING COOLING COOLING 15 Confirm the selected option by pressing Menu forwards 3 once e Repeat steps 1 4 Left LED in Agitator starts 9 flashing The agitator function starts automatically when boiling switches to cooling The agitator function can be deselected by pressing agitator stop 40 The following text appears in the display COOLING SET TEMPERATURE XXX C e Press Increase value 5 and the cooling temper ature increases hotter If _ appears this means unlimited cooling only option without food temp sensor food temperat ure probe e Press Decrease value 6 and the cooling tem perature decreases colder The following text appears in the display BOILING COOLING XXmin XX C WATER XXX XXX To select the settings made without saving 10 Press Increase value 5 twice e Continued from step 17 To save the settings that have just been made e Repeat step 6 If delayed start has been selected if the flow senso
19. ELECTION OF PROGRAM OPTIONS 31 17 TOOLS AND ACCESSORIES 32 31 11 111 ce ama Ga esse 82 15194141 ll ete aa 32 17 3 Supplementary equuipMent 52 18 AGITATOR MANTENANCE ee 32 19 Messages and error codes 33 34 20 1 TA EA EAA WALL a 34 Z9 54111101 DA 34 20 3 Cleaning when the equipment is USE 34 21 MAINTAENANCE OF THE VESSEL 35 22 idc a oe Ea eur bte de Rer or bere PR RE RUE 35 EN 02 2015 DOC N ST091 84 02 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN SAFETY 1 INSTRUCTIONS FOR SAFETY AND USE IMPORTANT Danger of fire explosion and death e his appliance is intended for use only for the preparation and processing of food in commer cial kitchens such as restaurants hospitals staff canteens butcher shops and food production companies Any other use is in breach of the in tended purpose and may cause damage or con stitute a hazard for humans and animals e he appliance must only be operated if all safety equipment and safety devices are available in stalled properly and fully functional e he appliance must only be inspected and oper ated by technically trained people e his appliance is not for use by children or pe
20. HIP is used to whip more lighter products such as cream A whip implement can be used with good results e Press Increase speed 4 until WHIP appears in the display PRESET AG PROGR WHIP e Press Agitator start 9 e Press Increase speed 41 and the stirrer starts at the lowest speed of 25 rpm Max speed 200 rpm e Press Decrease speed 42 to decrease the speed e Press Agitator stop 40 to stop the program Available as accessory 26 DOC N STO9184 02 14 2 3 Programming of own agitator program e Press Increase speed 49 once The following text appears in the display ADJ AGITATOR PROGRAM NAME SPD TIME R XXX XXX X PAUSE XXCXX 1 The text that can be changed flashes See Name agitator program e Press Menu forwards 3 once The following text flashes in the display SPD TIME R XXX XXX X PAUSE XX XX e Press Increase value 5 to add a higher speed max 100 rpm or press Decrease value 6 to lower the speed min 25 rpm e Confirm by pressing Menu forwards 3 once The following text flashes in the display SPD TIME R PAUSE XXCXX 1 XXX XXX X The total time the agitator is to run is programmed here Specified in minutes and seconds If appears this means unlimited time e Press Increase value 5 to extend the time or press Decrease value 6 to shorten the time e Confirm by pressing Menu forwards 3 once The following text flashes in the display
21. MARTMIX This function is used to rotate the agitator when the grid is open and in the event of tilting e Press the pushbutton 42 and hold to rotate the agitator at 20 rpm e Release the button 7 and the agitator tool will Stop 14 1 3 Preset agitator program There are 2 fixed agitator programs and 5 positions for own programs Press Increase speed 49 once The following text appears in the display PRESET AG PROGR MIX e Press Increase speed 49 until the appropriate program appears in the display When the program to be used appears in the display e Press Agitator start 9 The agitator starts the selected program e The agitator stops automatically when the pro gram has finished e You can also stop the agitator with Agitator stop e Changing the speed can be done in each program 14 2 Fixed agitator programs 14 2 1 MIX The fixed program MIX is used to mix more solid products such as minced meat Operating time and pause time are shorter than for normal stirring with pause e Press Increase speed 49 until MIX appears in the display AGITATOR PROGRAM FIXED MIX e Press Agitator start 9 e Press Increase speed 41 and the stirrer starts at the lowest speed of 25 rom Max speed 100 rom e Press Decrease speed 2 to decrease the speed e Press Agitator stop 40 to stop the program DOC N STO9184 02 25 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 14 2 2 WHIP The fixed program W
22. NO PRESS STOP e Press START 7 and the new values are now stored in the old number 24 DOC N STO9184 02 13 10 Name the food preparation program The food preparation program to be named is to appear in the display XXXXXXX xh XXX C WATER XL XX e Press Menu back 4 The following text appears in the display XXXXXXX Xh XXmin XXX C WATER XL XX e Press Increase value 5 until the program num ber to be replaced appears in the display Press Increase value 5 and STOP 8 sim ultaneously for 3 seconds The following text appears in the display SELECT PROGRAM NO X e Press Increase value 5 or Decrease value 6 to select the necessary letter or number e Press Menu forwards 3 to move forwards to the next character position or press Menu back 4 to move back Max 17 characters e Repeat until the program name is entered in the display Press Increase value and STOP simul taneously for 3 seconds and the new program name appears in the display XXXXXX XhXXmin WATER XL XXXXXXXX XX C e Press Menu forwards 3 once The following question appears in the display REPLACE YES PRESS START NO PRESS STOP e Press START 7 and the new values are now stored in the old number EN 02 2015 14 AGITATOR 14 1 Agitator Variomix NOTE When the agitator is rotating e he measuring stick must not be in the pan e o not insert the measur
23. NTENANCE 14 8 1 191 COS 14 CECI 15 9 1 LARS 11 34 E CT EC E T ees TT UT 15 9 2 cula 11 usume essee 15 9 3 11111110 i d 1 nu d or E dedo od ios 15 10 TRANSPORT HANDLING AND STORAGE 16 TC Constrained sie Ca eat Mi 16 oer 16 Woe 11111114 16 10 4 Moving and setting down appliances 16 PARAL E 16 Tis SAFELY SYSTEM esemes tast 17 Il de vao 000 oo 091 oe ol ol 17 112 CURSO x cans 17 Medem 17 te Saori 17 12 WONT PANEG 18 4 DOC N STO9184 02 EN 02 2015 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN OPERATING INSTRUCTIONS QPERATING ING H3UOD TONS Gann attack cede dones ab 19 Tok sta 11111 ees awe nd AS 19 Do Peo mme SE 19 19 We Dee VCC 11 s oh TOIT TT aasa 20 15 5 Load saksamaa kees 20 126 BOOMING a Ces gD 21 194 BOWING 01 4 e 22 20046 oe Oe 29 13 9 X Changes in food preparation program au cci dca oed 24 135 10 Name the tood prepar
24. OOLING e Confirm the selected option by pressing Menu forwards 3 once e Repeat steps 1 4 The following text appears in the display HOT KEEP SET TEMPERATURE XXX C T2 Press Increase value 5 to increase the keeping hot temperature or press Decrease value 6 to decrease the temperature e Confirm by pressing Menu forwards 3 once To select the settings made without saving e Press Increase value twice e Continued from step 13 To save the settings that have just been made e Repeat step 6 If delayed start has been selected if the flow sensor option has been selected e Confirm by pressing Menu forwards 3 once The following text appears in the display DELAY Xh XXmin XX C Xh XXmin XXX C WATER XXX XXX AGITATOR 000rpm When this appears in the display the machine can be started by 19 Pressing START 7 to start the machine Red LED lights with a fixed light Delay to start starts to count down For use of agitator See Agitator When the countdown to start is ready or if delayed start has not been selected the following text ap pears in the display BOILING HOT KEEP xh XXmin XXX C WATER XXX XXX AGITATOR 000rpm Boiling time starts when the set temperature has peen reached DOC N STO9184 02 21 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN When boiling time is over it transfers to hot keep The following text appears in the display BOILING HOT K
25. Settings Regular cleaning Special cleaning Maintenance Disassembly Scrap EN 02 2015 Safety shoes 000 DOC N ST091 84 02 OPERATING INSTRUCTIONS SMART LINE BOILING PAN AN e o not place any other objects apart from cook ware on the cooking area as it gets hot Danger of scalding and burning IMPORTANT Danger of fire explosion and death e Do not touch the hobs as this could cause scald Ing You can find the model name F Mod on the name plate on the appliance itself For more information please refer to section 4 of this manual This appliance is intended for cooking food indir ectly in pans and must not be used for any other purpose Any other use is considered improper ZA e Do not place any other objects apart from cook ware on the cooking area as it gets hot Danger of scalding and burning IMPORTANT Danger of fire explosion and death e Do not touch the hobs as this could cause scald ing 1 5 Personal protective equipment The following table gives an overview of the per sonal protective equipment PPE you must wear in the various stages of using the appliance PPE mandatory PPE available wear as appropriate PPE not necessary Head protection 9 Protective Eye gloves protection OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 1 6 Residual risk Residual risks that cannot be avoided completely during devel
26. ation senta ie 24 14 AGITATOR 25 14 41 411 VAMOS and a m se a 25 0110 a2 26 con 2 a tee deed laatu te ale or md 2 14 1 2 Agitation without grid SMARIMIX a babe 25 12 1 3 reser agnor DIOGO ass toas is he ando ohne suve 25 142 1901515000 4 04444 meta i 25 uM 26 142 1 Gr sa ST Cd i sonra tact 20 14 2 3 Programming ot Own agitator progai 5 e 26 IN Wane ere 27 IX AORO Su mudeleid 28 111 51 28 1482 28 14 00 BOOM aasa Goud Rew hg etme ew ad ake ood ein Gsm 28 1454 dd edo k e 28 14 4 Programming of own agitator program sss rh arn 29 14 41 Name agor DFOOESE TI s os pU de Che de enced had 29 14 5 Change values during operation rreerena 30 14 5 1 If Keeping hot or cooling is in progress RR RR ee ee de 30 I T Hig METER asus sas saastatus aas 91 14 IAEA es OTT a one 31 15 LANGUAGE SELECTION 31 16 S
27. come into contact with stainless steel they can damage the surface 20 1 In the event of hard limy water Dry the pan internally following use every day with a soft rag or paper moistened with acetic acid 34 DOC N STO9184 02 20 2 Cleaning the lid Fig 5 e he lid 1 can be rotated 90 degrees to be rinsed off so the water flows down into the vessel Re move the lid with knob 5 e The lid 1 and cover lid 2 can advantageously be cleaned in a dishwasher e Remove the lid and cover lid by means the knob 3 e Hold the handle 4 when the lid is loosened the arm will open by itself N Warning Beware of uncontrolled movement Lid and cover lid are put in place again using the knob 3 e Make sure the lid is securely attached before the handle 4 is released Dry the lid with a soft rag and detergent that does NOT contain acetic acid or ammonia Rinse with water 20 3 When the equipment is not in use Follow the instructions below when the pan is not used for a long period of time e Clean the pan See below On pan with agitator e Press On Off SL The display goes out See Fig 3 e Switch off the main switch D e Open the lid so that air can circulate This pre vents mould and odours from developing in a closed environment e urn off the water supply Call in qualified personnel TN _ CN AA e H E EI iy STV J QE VY Zi ett TESS if e CTS SS Stes LI 060 4595
28. d in special waste incineration plants Plastic parts that can be re cycled are marked JA NI The symbol on the products indicate that this product may not be treated as normal household waste but must be disposed of in the correct manner to prevent potential negative impacts on our environment and our health For information on recycling of this product please contact the distributor of the product our customer service or the garbage disposal service in the region Polyethylene Outer packaging PE 4 Polystyrene ug PS Protective corners 12 DOC N STO9184 02 EN 02 2015 7 ESPONSIBILITY LIABILITY 7 1 Liability The manufacturer is exempted from all liability for the product in the following cases e Disregarding the information in this Installation and Operating Instructions e Disregarding country specific regulations e Hepairs that were performed improperly and the use of replacement parts that are not listed in the replacement parts catalogue the installation and use of non original replacement parts or non ori ginal accessories can cause long term damage to the operation of the appliance Interventions by unqualified technicians Unapproved modifications or interventions Negligent maintenance Improper use of the appliance Exceptional unforeseeable circumstances Use of the machine by untrained persons Non compliance with the regulations for work place safety hygien
29. e Customer service technicians e Disposal officers DOC N STO9184 02 13 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 8 CUSTOMER SERVICE REPAIR AND MAINTENANCE Service repair and maintenance work must only be carried out by Electrolux Professional or Electrolux partner dealers Country specific and local regulations apply This applies in par ticular to safety and regulatory installations A service contract is therefore recommended Before starting any service repair or maintenance work the appliances must be disconnected from the mains supply turn the main switch off or remove the fuses from the power supply the gas supply turned off and drinking water pipes closed off Parts requiring replacement must be replaced by original parts from Electrolux Professional The warning and information notices fitted to the appliances must be obeyed by specialist and cus tomer service staff and must not be removed or altered During service repair and maintenance work dis tractions and stress factors must be avoided As such unauthorised persons must be kept away from the appliance Servicing may be not carried out on ships at sea JN e When operating the appliance and during main tenance you must make sure there are no mov ing parts such as vents inside the appliance Take extreme care IMPORTANT Danger of fire explosion and death 14 DOC N STO9184 02 e Repairs and service on the appliances must be
30. e and health that are in force in the appliance user s country Furthermore any liability for damage that is caused by conversions and independent modifications made by the user or the customer will not be ac cepted The employer or the person responsible for safety in the workplace is responsible for the selec tion of personal protective equipment which will be made available to personnel in accordance with the regulations applicable in the country in which the appliance is used EN 02 2015 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 7 2 Storing the operating instructions These installation and operating instructions must be kept intact for the whole life cycle of the appli ance up until it is disposed of These installation and operating instructions must always accompany the appliance if it is transferred sold rented allowed to be used by others or leased Store the documents so that they are always avail able for users Additions and amendments to the Installation and Operating Instructions which Electrolux Profes sional will if necessary send to customers form an integral part of the guide and must be kept with it T 3 Target groups The installation instructions are intended for e Staff who are responsible for transport and hand ling e Engineers who set up and commission the ap pliance e he employer of the appliance users and the safety officer at the workplace e Staff using the appliances
31. ed in so that it is forced out through the overflow hole on the bearing housing Fig 4 pos A A Overflow hole e Check the grease that is forced out If it shows signs of being mixed with water the agitator bearing and seal should be removed for inspec tion and if necessary replaced 18 1 If the pan with agitator is taken out of service For operation stoppages for periods longer than one month e Pour in 2 3 litres of silicone oil to counteract the desiccation of the agitator seals e Heat the pan to 60 80 e Follow the instructions above Appropriate oil is e g Whiterex 309 Mobil 18 2 When the pan is put back into service e Pour off the oil and clean the pan EN 02 2015 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 19 MESSAGES AND ERROR CODES Message Cause ______ Action _ Hed LED in START 7 flashes The following text appears in the display TILTING Xh XXmin XXX C ATOR 000rpm AGITATOR LID GRID ON Buzzer sounds and the following text appears in the display ELEMENT OVERHEATED INTERRUPT YES PRESS STOP NO PRESS START The agitator has stopped The following text appears in the display OVERLOADED SHUT OFF BOILING PAN DURING APPROX 1 MIN PT 1000 FOOD INTERRUPT PT 1000 FOOD SHORT CIRCUIT PT 1000 ELEMENT INTERRUPT PT 1000 ELEMENT SHORT CIRCUIT WATER INTERAPTION SET WATER UNSETTABLE DURING WATER FILLING TIME TO SERVICE CONTINUE VES PRESS STOR
32. er Before setting down the load check that there are no obstacles and that the surface is flat and de signed to support the weight of the load 10 5 Storage The appliances and or their parts must be protec ted from moisture and stored in a dry vibration free room with a non aggressive atmosphere and a tem perature of 5 C 41 F to 50 C 122 F The location must have a horizontal level surface in order to prevent the appliances becoming mis shapen or the adjustable feet being damaged The accessories delivered with the appliances must not be changed Any parts that have been lost or are faulty must be replaced with original parts EN 02 2015 11 SAFETY SYSTEM WARNING OVERHEATING Observe If overheating occurs a buzzer will sound and the following text will appear in the display ELEMENT OVERHEATED The heat will shut off in the event of a fault to the ele ment sensor Switch off the pan by e Pressing On Off OJ see Fig 3 for resetting the overheating protection The display goes out e Wait 5 seconds Press On Off 4 Display lights If the warning is still lit e Check the water level in the pressure vessel See Filling pressure vessel with water in the in stallation instructions e f the warning is still lit call in a qualified technician The water level in the vessel should be checked at least once quarter See Filling pressure vessel with water in the installation instructions
33. hat both incoming cables are without current WARNING Caution high voltage This symbol indicates the pans electrical cabinet The door of the electrical cabinet and other cover panels may only be opened by technicians who are trained for such work AN e Do not spray water straight at the columns or the outside of the pan e lf water comes into contact with live compon ents it could be fatal e Always take care when cleaning especially when close to electrical components e Usea damp cloth for cleaning IMPORTANT Danger of fire explosion and death 8 DOC N STO9184 02 When the agitator is rotating obseve caution e The measuring stick must not be in the pan e not insert the measuring stick down in the pan e Do not insert any implements down in the pan e Do not use the pan columns as work surfaces e Do not taste For more information refer to the section on Cleaning IMPORTANT Danger of fire explosion and death For tilting The area 1 5 metres in front and behind the pan must be regarded as a risk zone with access only allowed for the operator This symbol warns of heat and steam Take care during operation when high temperatures can Occur WARNING Caution hot enviroment EN 02 2015 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN TECHNICAL SPECIFICATIONS 2 MODELS Smart Line boiling pans Heating
34. ing pans are manufactured in compliance with directives MD 2006 42 EG AFS 2008 3 LVD 2006 95 EG EMC 2004 108 EG PED 97 23 EG AFS 1994 4 The machine is regarded as an appliance The appliance consists of a CE approved safety valve Category IV and a CE approved pressure vessel Category Il Procedures for assessing compliance of the appliance are drawn up in accordance with Module A Standards EN13886 2005 A1 2010 EN ISO 12100 2010 EN 60204 1 A1 2009 EN13445 1 5 and are CE labelled EN 02 2015 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 4 APPLIANCE IDENTIFICATION 4 1 Rating plate a Mode Boiling pan SMART 300 L Steam heated 400 V 50H Tot 0 5 kW M 0 37 kW Max temp 127 C Steam consump 78 kg h Volume vessel 300 L Volume sear 120 SteelTech AB A ngs s swepen Max phaseload 30 AET 16 A Water pressure MAX100kPa Wiring Diagram STO 99 69 Prod year 2014 Typ No 428 08 54 00 Larkvagen 4 ProdNo 9F23220800 9692810200 9F92810800 441 40 Alings s jt SWEDEN IPX5 0409 WEEE The illustration shows an example of an unlabelled The eight digit serial number Ser No on the rating rating plate and may differ from the one on your plate contains the following information appliance 4 25 1 0003 There is one rating plate affixed at a clearly visible B spot on the outside of the unit There is another rat 3 Appliance with this PNC produced
35. ing stick down in the pan e Do not insert any implements down in the pan e Do not use the pan columns as work surfaces e Do not taste In order to start the agitator the lid or grid must be closed Without grid the following text appears in the display 14 1 1 Continuous stirring e Press Agitator start 9 once Left LED lights with a fixed light e Press Increase speed 49 and the stirrer starts at the lowest speed of 25 rpm Max speed 100 rom e Press Decrease speed 42 to decrease the speed Press Agitator stop 40 to stop the agitator Reverse stirring Press Agitator start 9 twice The LED in the middle lights e Press Increase speed 49 once and the stir rer starts at the lowest speed of 25 rpm Max speed 100 rpm The agitator rotates clockwise for 15 seconds 5 second pause 15 second an ti clockwise etc e Press Decrease speed 43 to decrease the speed e Press Agitator stop 40 to stop the agitator Change to pause time Pause time in the stirring can be altered when the LED in the middle of the Agitator start 9 is lit Press Agitator start 9 and the right LED also lights The following text appears in the display PAUSE TIME Xmin XXs e Press Increase value 5 to add a longer pause to the stirring Max 9 min 55 s and min O min 05 9 Press Decrease value 6 to shorten the pause EN 02 2015 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 14 1 2 AGITATION WITHOUT GRID S
36. le should the load tip over The manufacturer shall under no circumstances be liable for damage during transport or damage to the packaging 10 2 Unloading Prior to removing the transport fastenings you must ensure that the stability of the appliance compon ents does not depend on the fastenings and that the load cannot fall from the vehicle as a result otanding under hanging loads during loading and unloading is prohibited Unauthorised persons are prohibited from accessing the work area 16 DOC N STO9184 02 10 3 Notes on handling Observe the following precautions to ensure safe handling e Use appropriate lifting means with sufficient load bearing capacity e g forklift or lifting truck e Cover the edges e Check the lifting forks and adhere to the instruc tions on the packaging e Prior to lifting e Ensure that all employees are at a sufficiently safe distance and that unauthorised persons have no access to the workspace e Check the stability of the load e Make sure that no goods can fall off while lifting avoid sudden movements and impacts e Lift the appliance as little as possible when in mo tion e Appliances may be not be lifted on removable or unsuitable load bearing parts protective panels cable guides etc 10 4 Moving and setting down appliances The person controlling the lifting aid must have a good overview of the route and must be able to halt his her manoeuvres at any time in case of dang
37. mical substances leaving it unable to regenerate itself even rust free stainless steel can be subject to corrosion It is possible to develop or regenerate the passive layer by treating it with running oxygen rich water Oxygen starving abrasives such as hydrochloric acid chlorides and spice concentrates mustard vinegar essences spice cubes and cooking salt solutions can lead to chemical damage or rupture of the passive layer depending on the concentra tion and temperature Extraneous rust iron particles the formation of galvanic elements and lack of oxygen could cause more damage If the appliance is kept in an envir onment with corrosive substances e g chlorine it is advisable to apply a thin layer of Vaseline oil to its cleaned stainless steel surfaces 1 e Keep Stainless steel surfaces clean at all times and make sure they are well ventilated NOTE Please follow these instructions e Do not place the lid on appliances when not in use so that air can get to the surface e Remove limescale fat starch and protein layers with regular cleaning to avoid corrosion De scale the appliance with a solution of 1096 vinegar 1096 phosphoric acid or a suitable de scaling solution available for purchase e Do not let stainless steel parts come into pro longed contact with acids spices salts etc Hinse off work surfaces with fresh water This ap plies especially after cooking potatoes pasta or rice in salted water
38. opment or are eliminated with the use of suitable safety devices are marked on the machine When the machine is installed ensure there is suf ficient free space around it to reduce the residual risks The area around the machine must be free of obstructions clean dry well lit Residual risk Risk of slipping or falling Description of the risk The user could slip due to water or dirt on the floor Danger of scalding or abrasions The operator may be injured when touching internal parts of the machine without protective gloves Hisk of electric shock When touching live electrical components e g during maintenance work if the power is not disconnected Danger of tipping loads The appliance may be damaged if unsuitable lifting measures are used dur ing transport and handling or if the load is improperly distributed Danger from chemical substances Injury due to accidental inhalation of chemicals e g refrigerant Please always take note of the stickers on the appliance Hisk of injury during installation and maintenance work Serious injury can occur when touching moving parts such as fans without adequate protective clothing 1 7 Safety instructions owitch off the power before attempting to rectify faults or operating problems e Press On Off see Fig 3 e Switch off the Main circuit switch on the rear of the right column e In the case of a double connection check t
39. pliance models The product images in this guide serve only as an example are not to scale and may vary from your particular model No liability is assumed for any errors inaccuracies or changes EN 02 2015 DOC N ST091 84 02 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN TABLE OF CONTENTS SAFETY il INSTRUCTIONS FOR SAFETY AND USE 6 1 1 Safety instructions for handling electrical appliances 6 1 2 ista SHOP Se IMV ODSA ON T 1 3 1111 7 1 4 7 irs Personal protective eguipment sreeeeeesena 4 1 6 miss ebc EM aenea 8 1 7 osaleb INSU TO scan icio dep eas eee edu hs UE PE e E d RED UR d 8 TECHNICAL SPECIFICATION 2 MODRE scant 9 3 TESTING CESS 10 4 APPLIANCE IDENTIFICATION mmm uuu 11 4 1 Kallel olles ines e A 11 CONSTRUCTION OF THE APPLIANCE 11 GENERAL INFORMATION 6 PACKAGING 12 RESPONSIBILITY LIABILITY mullu uuu uuu uuu 13 7 1 Kc a neues Ghee Aha 13 lad OIONBG ASO PALA aua sce md qus douse shee qu t Frac deg Unde x 13 1 3 liess So gavin cant aate 13 CUSTOMER SERVICE REPAIR AND MAI
40. pliance or its parts with a high pressure cleaner or a steam cleaner this may cause it to malfunction Our appliances are properly thermally insulated and insulated Due to the high cooking temperatures in industrial kitchen appliances individual compon ents get extremely hot e g lids panels This does not constitute a design flaw but is a result of the thermal conductivity of stainless steel The noise level of the unit is negligible Legal indic ations are complied with The sound pressure level is below 700 Our appliances are not suitable for installation out doors or in spaces exposed to the effects of weather rain direct sunlight etc AN e Any work on the electrical wiring must be carried out according to the supplied electrical diagrams and under consideration of the country specific and local regulations e J This appliance must be connected to a point indicated on a potential equalisation system with a minimum conductor cross section of 10 When installing multiple appliances connect them all together through potential equalisation IMPORTANT Danger of fire explosion and death e o avoid damage and injury if there is any dam age to the local mains supply it must replaced by a qualified electrician in accordance with the ap plicable local and national regulations 1 1 Installation and initial operation The electricity and water supply must be installed and the appliance fi
41. r option has been selected e Confirm by pressing Menu forwards 3 once The following text appears in the display DELAY Xh XXmin XX C XXh XXmin XXX C WATER XXX XXX AGITATOR 000rpm When this appears in the display the machine can pe started by 17 Pressing START 7 to start the machine Red LED lights with a fixed light Delay to start starts to count down For use of agitator See Agitator EN 02 2015 When the countdown to start is ready or if delayed start is not selected the following text appears in the display BOILING COOLING xh XXX C WATER XXX XXX OPERATING INSTRUCTIONS SMART LINE BOILING PAN 13 8 COOLING if the jacket cooling option has been selected BOILING BOILING HOT KEEP BOILING COOLING COOLING AGITATOR XXXrpm If the boiling pan does not heat up see error mes sages on page 20 Boiling time starts when the set temperature has been reached When the boiling time is over the heating switches off and the pan switches to cooling The agitator starts to rotate at a speed of 25 rpm if it has not been deselected The following text appears in the display BOILING COOLING XXU WATER XXX XXX AGITATOR 025 rpm When the correct cooling temperature has been reached the red LED goes out a buzzer sounds for 2 minutes and the display flashes until the pan switches off The following text appears in the display BOILING h min XX C XX C WATER
42. r sons with reduced physical sensory or intellec tual abilities or inexperienced and untrained per sons unless under the supervision of a qualified person who is responsible for their safety Do not allow children to play with this appliance e he appliance must not be operated in the vicin ity of inflammable materials or vapours e his appliance must not be used to heat freeze closed containers cans tins bottles tubes etc Danger of explosion e heuse of corrosive poisonous and inflammable materials in our cooking appliances is strictly for bidden e he appliance s performance data must not be changed e n the event of a defect that prevents operation switch the appliance off Always call for an au thorised professional if the troubleshooting sec tion states as such if the defect is not described or is not obvious or if any necessary intervention requires the removal of panels Until the defect is resolved the appliance must be switched off and disconnected from the power supply e Before starting any service repair or mainten ance work the appliances must be disconnec ted from the mains supply turn the main switch off or remove the fuses from the power supply and drinking water pipes closed off 6 DOC N STO9184 02 e Before cleaning the appliance must be discon nected from the power supply and cooled down completely to avoid the risk of scalding or elec tric shock e Do not spray the ap
43. rease speed 49 to select agitator program e Press Increase value 5 and STOP 8 simultan eously for 3 seconds The following text appears in the display SELECT PROGRAM NAME Press Increase value 5 or Decrease value 6 to select the suitable letter or number e Press Menu forwards 3 to move forwards to the next character position or press Menu back 4 to move back to the previous character Max 17 characters e Repeat until the program name is entered in the display e Press Increase value 5 and STOP 8 simultan eously for 3 seconds The new agitator program name appears in the display ADJ AGITATOR PROGRAM 1 XXXXXXXXXX SPD TIME R XXX XXX X PAUSE XX XX 1 DOC N ST09184 02 27 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 14 3 Agitator Promix NOTE When the agitator is rotating e he measuring stick must not be in the pan e o not insert the measuring stick down in the pan e o not insert any implements down in the pan e Do not use the pan columns as work surfaces e D0 not taste In order to start the agitator the lid or grid must be closed Without grid the following text appears in the display AGITATOR LID GRID ON 14 3 1 Continuous stirring e Press Agitator start 9 once The LED lights with a fixed light e Press Increase speed 49 and the stirrer starts at the lowest speed of 25 rpm Max speed 170 rpm for 100 amp 150 litre 140 rpm for 200 amp 300 litre pans
44. ress STOP 8 Increase value 5 simultan eously for 3 seconds The following text appears in the display LANGUAGE ENGLISH e Press Increase value 5 or Decrease value 6 to browse through the languages e Press START 7 to confirm and store the selec ted language EN 02 2015 OPERATING INSTRUCTIONS SMART LINE BOILING PAN SELECTION OF PROGRAMMING OPTIONS There is the option of deselecting Programming and Delayed start if they are not used and make the menus easier to use The following text appears in the display 16 MENU SETTINGS V V e Press STOP 8 Increase value 5 simultan eously for 3 seconds The following text appears in the display LANGUAGE ENGLISH e Press Menu forwards 3 The following text appears in the display PROGRAMMING NO YES e Press Increase value 5 or Decrease value 6 to select the required option Yes to retain the pro gramming option or NO to deselect it e Press Menu forwards 3 once again The following text appears in the display DELAYED START NO YES e Press Increase value 5 or Decrease value 6 to select the required option Yes to retain the Delayed start or NO to deselect it e Press START 7 to confirm the selection If you do not want to go through all the steps you can press START 7 at any time to continue DOC N STO9184 02 31 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 17 TOOLS AND ACCESSORIES
45. rst operated by carefully follow ing this instruction manual and must be done only by a certified specialist under consideration of the country specific and local regulations You are re sponsible for this EN 02 2015 1 2 Obligations of the operator Hesponsibility for and guarantee of the perman ent correct operation of all safety related compon ents lie with the responsible manager The correct operation of these components must be tested at least once each calendar year by Electrolux Profes sional authorised specialist engineers and replaced if necessary 1 3 Obligations of the operator Responsibility for and guarantee of the perman ent correct operation of all safety related compon ents lie with the responsible manager The correct operation of these components must be tested at least once each calendar year by Electrolux Profes sional authorised specialist engineers and replaced if necessary 1 4 Use SMART boiling pans This manual refers to the following models SMART SMART VARIMIX SMART PROMIX You can find the model name F Mod on the rating plate on the appliance itself For more information please refer to section 4 of this manual This appliance is intended for cooking food indir ectly in pans and must not be used for any other purpose Any other use is considered improper Protective clothing Phase Transport Handling Unpacking Installation Regular machine use
46. rt the process e Press On Off 1 for 1 5 seconds Display lights The following text appears in the display The arrow points to the associated function button MENU SETTINGS V V e Press Menu forwards 3 once The status of the pan appears in the display BOILING h min XXX C WATER XXX XXX AGITATOR 000rpm e Press Menu forwards 3 once The following options can appear in the display depending on the options selected rom revolutions per minute EN 02 2015 gt BOILING BOILING HOT KEEP BOILING COOLING COOLING e Press Decrease value 6 The cursor moves down Or e press Increase value 5 and the cursor gt moves up 13 3 BOILING e Confirm the selected option by pressing Menu forwards 3 once The following options appear in the display MANUAL FILLING WATER XXXL Press Increase value 6 once to start the filling of the water The amount of water that is filled into the pan can be read in the display if the flow sensor option has been selected Press Decrease value 6 or STOP once to stop the filling of the water e Press Decrease value 6 for 5 seconds to set the value to zero if the flow sensor option has been selected If Menu forwards 3 is activated before the water filling is stopped press STOP 8 to stop the filling BOILING oEI TEMPERATURE XXX C ZA Press Increase value 5 to increase the temperature max 121 C
47. s may cause it to malfunction NOTE Please follow these instructions e Must not be cleaned with steel brushes steel wool copper cloths sand based or similar products 15 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 10 TRANSPORT HANDLING AND STORAGE The transport handling and storage of the appli ances must be carried out only by specialist work ers who e Have specific technical training and experience e Know the safety regulations and the legal provi sions of their specialist area e Have knowledge about general safety provisions Are able to recognise and avoid possible dangers The staff who are responsible for the transport handling and storage of the appliances must be trained in the use of hoisting aids and have suffi cient knowledge to use the individual means of pro tection for the work to be carried out e g work wear safety shoes safety gloves and hard hats 10 1 Transport Transport relocation and handling moving in house must be carried out by using lifting means of suitable load bearing capacity The appliance can be transported by truck train or ship Except for road transport the appliance is sent in a container together with other appliances The appliances can be loaded inside the container by the assigned carrier Due to the appliance dimensions it is not permitted to stack the appliances on top of each other during transport In such case the manufacturer shall not be liab
48. stop is activated Reset the emergency stop Red LED in the START button is lit Boiling is selected The boiling pan does NOT heat up EN 02 2015 SVI SPI during cooling the boiling Start the COOLING program and stop it after pan has become de energized approximately 20 seconds Restart the BOILING program Only boiling pans with Ice water cooling DOC N STO9184 02 33 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 20 CLEANING Following usage and for daily cleaning of the pan e Use a neutral detergent and hot water e Runtheagitatorfor 10 30minutesataspeedof30 o0 rpm A cleaning tool can be beneficial to use available as accessory For usage of cleaning tool Press the cleaning tool on the shaft and lock using the handle Put on the grid Run the agitator for 10 30 minutes at a speed of 30 50 rom e Empty the pan wash and rinse thoroughly e Be extra careful when cleaning and rinsing if salt is used when preparing food in the pan Salt that can dry hard may damage the surface of the pan vessel e Also clean the pan s external stainless steel sur faces with hot water If necessary you can also use a neutral detergent and a soft brush or sponge e Panels and knobs should be wiped off with a damp cloth e Do not use steel wool or abrasive cleaning ma terials when cleaning stainless steel surfaces e Do not use cleaning agents that contain chlor ine If chlorine or chlorine compounds
49. tal power V neutral Frequency Max phase current PNC F Mod Kg KW conductor Hz A 232222 928091 SM6B300 480 25 25 400 V 3N 50 60 36 36 232226 928092 SM6V200 400 257 14 7 400 V 3N 50 60 201425 232227 928092 SM6V300 480 25 22 400 V 3N 50 60 36 43 232230 928092 SM6P200 400 ZS TSS 400 V 3N 50 60 36 29 232231 928092 SM6P300 500 29028 400 V 3N 50 60 36 47 omart Line kokgrytor med tillval isvattenkylning Voltage Weight Total power V neutral Frequency Max phase current PNC F Mod Kg KW conductor Hz A 232223 928153 SM6V50 180 loa 400 V 3N 50 60 2f 232224 4 928154 SM6V100 280 24 400 V 3N 50 60 39 232225 928155 SM6V150 400 215 400 V 3N 50 60 51 232226 928156 SM6V200 400 39 7 400 V 3N 50 60 62 232227 928157 SM6V300 480 522 400 V 3N 50 60 80 3 TESTING CE DIRECTIVES CERTIFICATION Sus All appliances are tested and certified according to the relevant standards and approved engineer ing rules by internationally recognised testing bod ies This guarantees that all internationally required quality and safety standards have been met Each appliance features the CE marking on its nameplate All appliances have passed the test ing for protection class IP X5 water protection To ensure continued compliance with this protection class all seals must remain in a perfect condition and all components must be assembled properly after installation repairs and maintenance work 10 DOC N STO9184 02 Boil
50. to decrease the temperature Agitator speed if the agitator option has been selected e Press Increase speed 49 to increase the speed or press Decrease speed 42 to decrease the speed Repeat for preset agitator program e Press Increase speed 49 and select the appro priate program e Press Agitator start 9 Pause in the stirring if the Variomix agitator option has been selected e Press Agitator start 9 The right LED lights e Press Increase value 5 to add a longer pause to the stirring Press Decrease value 6 to shorten the pause EN 02 2015 14 6 Tilting of pan e Press Tilting 43 and keep the button pressed until the pan reaches the desired position or stops at max tilted position NOTE Tilting can only be done when the lock and grid are raised NOTE Tilting can also be done during water filling e g when cleaning 14 7 lilt return of pan e Press Tilt return 44 and keep the button pressed until the pan reaches the desired position or stops in working position In order for tilt return to work the pan must be tilted more than 5 from working position 15 ANGUAGE SELECTION NOTE Factory settings are in English The languages available are Dansk Deutsch English Espanol Francaise Nederlands Italiano Norsk Suomi Svenska Eesti The language is ordered as special The following text appears in the display MENU SETTINGS V V e p
51. top 40 to stop the program EN 02 2015 14 4 Programming of own agitator program Press Increase speed 41 once The following text appears in the display ADJ AGITATOR PROGRAM 1 NAME SPD TIME XXX XX XX The text that can be changed flashes See Name agitator program e Press Menu forwards 3 once The following text flashes in the display SPD TIME XXX XX XX e Press Increase value 5 to add a higher speed Max speed 170 rpm for 100 amp 150 litre 140 rom for 200 amp 300 litre pans or press Decrease value 6 to lower the speed min 25 rpm e Confirm by pressing Menu forwards 3 once The following text flashes in the display SPD TIME XXX XX XX The total time the agitator is to run is programmed here Specified in minutes and seconds If appears this means unlimited time Press Increase value 5 to extend the time or press Decrease value 6 to shorten the time e Confirm by pressing Menu forwards 3 The figure 1 in the display changes to 2 SPD TIME XXX XX XX The following text flashes again ADJ AGITATOR PROGRAM 1 NAME SPD TIME XXX XX XX Repeat the procedure from the beginning to add the different agitator values that are required This can be done three times in total The following text appears in the display ADJ AGITATOR PROGRAM NAME SPD XXX XX XX TIME EN 02 2015 OPERATING INSTRUCTIONS SMART LINE BOILING PAN 14 4
52. trap oteam trap Fig 1 pos C releases the cold air into the steam generator when starting the pan When the water in the steam generator starts to boil and hot steam starts to flow out the steam trap closes automatically DOC N STO9184 02 17 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 12 CONTROL PANEL 21 Se M On Off Ma 2 9 5 Variomix agitator Promix agitator Je SIE Display Menu forwards Menu back Increase value Decrease value Start Stop Agitator start Agitator stop Increase speed Decrease speed Tilting Tip return Emergency stop Main switch Pushbutton agitation without grid Smart mix Fig 3 DOC N ST09184 02 EN 02 2015 OPERATING INSTRUCTIONS SMARTLINE BOILING PAN 13 OPERATING INSTRUCTIONS 13 1 Instant start BOILING Fig 3 e Press On Off 4 for 1 5 seconds Display lights The following text appears in the display MENU SETTINGS V V The pan is to be in working position See Tilting Tilt return e Press START 7 Red LED lights with a fixed light The following text appears in the display BOILING h min XXX C WATER 000 000 AGITATOR 000rpm The pan starts and the pan temperature automatic ally rises to 100 C For use of agitator See Agitator 13 2 Programmed start Settings If you do not want to go through all the steps you can press START 7 at anytime in the programming to sta
53. ure Only cooling if the mat temp sensor and jacket cooling options have been selected Press Menu forwards 3 twice e Press Increase value 5 to increase the cooling temperature hotter or Decrease value 6 to de crease the cooling temperature colder Boiling time if the mat temp sensor option has been selected e Press Menu forwards 3 three times e Press Increase value 5 to extend the boiling time or e press Decrease value 6 to shorten the boiling time Water filling preselected number of litres if the flow sensor option has been selected Press Menu forwards 3 four times e Press Increase value 5 until the required amount of water in litres apears in the display 30 DOC N STO9184 02 Temperature settings t the mat temp sensor option has been selected Keeping hot when boiling keep hot Or Cooling when boiling cool if the mat temp sensor and jacket cooling options have been selected e Press Menu forwards five times e press Decrease value 6 to decrease the temperature 14 5 1 If keeping hot or cooling is in progress The status of the pan appears in the display BOILING XXXXXXX XX C WATER XXX XXX AGITATOR OO0rpm e Press Increase value 5 to increase the temper ature or press Decrease value 6 to decrease the temperature Or e Press Menu forwards 3 five times e Press Increase value 5 to increase the temper ature or press Decrease value 6

Download Pdf Manuals

Related Search

electrolux_232218_usermanual

Contents

Download Pdf Manuals

Related Search

Related Contents