a printable data sheet
Contents
1. DATA COMM FOR BUSINESS APS 01 NPS 01 FEATURES Remote control AC power to other equipment Provides status output Works with any appropriate control command source Simple RJ45 connection for LAN network or control leads APS 01 is data lead controlled NPS 01 is controlled via TCP IP Ethernet SPS 01 is serial RS232 controlled 10 AMP rating Rack mount option available Use to reboot remote equipment NPS 01 includes a watchdog timer APS 01 NPS 01 SPS 01 Remote Power Switches DESCRIPTION The APS 01 NPS 01 and SPS 01 remote power modules control AC power to any remote equipment They differ by the controlling method When The APS 01 is used with the DCB Access Switch it allows the equipment to be turned on off and power cycled from any remote PC or terminal The DCB Access Switch provides options for power cycle delay time sequencing of multiple power modules normally on or off conditions and control of any number of AC devices from one to 152 The APS 01 can be used as a power control switch when used with the DCB IP 6600 router The APS 01 can also be used with the SMD SCADA _ Multidrop Multiplexers The NPS 01 controls power to any remote equipment by using commands received through a TCP IP ethernet interface The source of the commands may be a Telnet connection web browser or SNMP management workstation AC powered equipment can be turned on off or2. power cycled from any remote PC or other device using a web browser or telnet client Power status is reported back to the browser or telnet client The NPS 01 also features a watch dog type ping monitor When enabled if the controlled device does not respond to a ping the NPS O1 will cycle power to it s connected device The SPS 01 controls power using ASCII commands received through an RS232 interface No configuration is required however the dwell timer for a power cycle may be set The SPS 01 echoes commands and provides status back to the controlling device so the remote operator knows if power to the controlled device is on or off NPS 01 Rear View SPECIFICATIONS General One AC port with fail safe and status feedback Power units on off or power cycle equipment Control Input APS 01 Control Port Connector RJ 48S RJ 45 Control Input Pin 2 input 5 to 12 VDC turns AC on 5 to 12 VDC turns AC off Device Present Status Ties pin and pin 8 together to indicate APS present Status output from APS 01 Output Status Pin 3 ties to pin 1 when device is on and powered NPS 01 10 100 Ethernet port Configure and control via web browser Telnet or SNMP SPS 01 Control Port Connector RJ 48S RJ 45 RS232 serial port 9600 bps 8 data bits no parity 1 stop bit Control using ASCII commands AC Output One port 120 VAC 10 amp continuous 230 VAC export model available Indicators rear panel AC Power on Load Power
3. on APS 01 Operation When APS 01 is used with DCB Access Switch Access Switch Setup Commands Port ID Access Switch Operational Commands Port_id ON Port_id OFF Port_id Status Port_id Cycle APPLICATION W Controlled Equipment i Access Switch Controlled Equipment gt Any IP Connection ISP PPP etc Control Workstation with Web Browser Telnet or SNMP APS 01 NPS 01 SPS 01 Remote Power Switches Physical Electrical Power requirements 120 VAC 10 amps or less depending upon attached equipment Export 230 VAC model available Dimensions 1 5 X 5 75 X 5 5 Rack mount option available 3 units mount in 1 75 of rack space Environmental e Operating Temp 40 to 70 C e Storage Temperature 50 to 75 C e Humidity lt 95 Non condensing Ordering Specify APS 01 NPS 01 or SPS 01 Specify 230VAC European if required Manuals Available On line Download the user manual from our web site at http www dcbnet com Data Comm for Business Inc 2949 CR 1000 E Dewey IL 61840 Voice 8004DCBNET 800 432 2638 Fax 217 897 1331 Email www dcbnet com contact html Web http www dcbnet com
Download Pdf Manuals
Related Search