325 Kb Manual_PAR
Contents
1. LIGHTING PROFESSIONAL LED COLOR CHANGER USER MANUAL PAR KEEP THIS MANUAL FOR FUTURE NEEDS GENERAL GUIDELINES Thanks for choosing PIXEL PAR This is the innovative LED application for professional lightings Since the RGB ultra bright LED lamps the unit can combine more than 16 7 million soft color effects This device is a lighting effect for indoor professional use on stages discotheques theatres etc This fixture is only allowed to be operated with the max alternating current which stated in the technical specifications in this manual Lighting effects are not designed for permanent operation Consistent operation breaks may ensure that the device will serve you for a long time without defects Do not shake the device Avoid brute force when installing or operating the device While choosing the installation spot please make sure that the device is not exposed to extreme heat moisture or dust Please don t project the beam onto combustible substances The minimum distance between light output from the projector and the illuminated surface must be more than Im If you use the quick lock cam in hanging up the fixture please make sure the quick lock fasteners turned in the quick lock holes correctly Operate the device only after having familiarized with its functions Do not permit operation by persons not qualified for operating the device Most damages are the result of unprofessional operatio2. n Please use the original packaging if the device is to be transported For safety reasons please be aware that all modifications on the device are forbidden If this device will be operated in any way different to the one described in this manual the product may suffer damages and the guarantee becomes void Furthermore any other operation may lead to short circuit burns electric shock crash etc SAFETY INSTRUCTIONS Important safety warns CAUTION careful with your operations With a dangerous voltage you can Suffer a dangerous electric shock when touching wires This device has left the factory in perfect condition In order to maintain this condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual cS Important Damages caused by the disregard of this user manual are not subject to warranty The dealer will not accept liability for any resulting defects or problems If the device has been exposed to temperature changes due to environmental changes do not switch it on immediately The arising condensation could damage the device Leave the device switched off until it has reached room temperature This device falls under protection class I It is essential that the device be earthed If protection screen lens or ultraviolet screen in the fixture is apparently damaged or is damaged to exceed their own effecti
3. nel mode Setting Dimmer curves Dimmer Curve 01 02 01 dimmer curve linear response LED 02 dimmer curve linear response halogen Setting Static Colors When display shows 1 STATIC ROOGOOBOO F00 you can select the desired colors and brightness is for flash you can adjust the flash speed from F00 F99 Setting internal programs When the display shows 2 CHANGE 7colors change SP01 99 F00 99 you can select the desired color change speed from SP01 SP99 FOO is for flash you can adjust the flash speed from F00 F99 3 CHANG3 3colors change SP01 99 F00 99 you can select the desired color change speed SP01 SP99 F00 is for flash you can adjust the flash speed from F00 F99 04 DREAM SP01 99 00 99 you can select the desired color dreaming speed from 5 01 5 99 FOO is for flash you can adjust the flash speed from FO0 F99 Setting the Sound sensitivity When the display shows SOUND SENS 00 31 you can adjust the sound sensitivity from SENSOO SENS31 Setting Master Slave mode When the display shows SLAVE MODE It is the slave setting and will run after the master unit DMX Protocol Press MODE button until the display shows Addr you can now set the desired address via UP DOWN buttons The device has 2 DMX modes as following 3 channel mode Channel Value Function 1 000 255 Red 0 100 2 000 255 Green 0 100 3 000 255 Blue 0 100 5 channel m
4. ode Channel Value Function 1 000 255 Red 0 100 2 000 255 Green 0 100 3 000 255 Blue 0 100 4 000 255 Master dimmer 0 100 5 000 000 ON 001 005 Sound control 7 colors 006 010 ON 011 255 Strobe increasing CLEANING AND MAINTENANCE The following points have to be considered during the inspection 1 All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded 2 There must not be any deformations on the housing color lenses fixations and installation spots ceiling suspension trussing 3 Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances 4 The electric power supply cables must not show any damage material fatigue or sediments Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed CAUTION 2 Disconnect from mains before starting maintenance operation We recommend a frequent cleaning of the device Please use a moist lint free cloth Never use alcohol or solvents There are no serviceable parts inside Please refer to the instructions under installation Should you need any spare parts please order genuine parts from your local dealer TECHNICAL SPECIFICATIONS LED 1 x 100W RGB Beam angle 60 Power consumption 120 Voltage AC110V 250V 60Hz 50H
5. ve degree such as cracked and gashed it must be replaced The electric connection must carry out by qualified person Make sure that the available voltage is not higher than specified Make sure the power cord is never crimped or damaged by sharp edges If this would be the case replacement of the cable must be done by an authorized dealer Always disconnect from the mains when the device is not in use or before cleaning it Only handle the power cord by the plug Never pull out the plug by tugging the power cord Please don t project the beam onto combustible substances If the external flexible cable or cord of this luminaire is damaged it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard CAUTION Never touch the device during operation The housing may heat up CAUTION Never look directly into the light source as sensitive persons may suffer an epileptic shock Please be aware that damages caused by manual modifications to the device are not subject to warranty Keep away from children and non professionals OPERATION INSTRUCTION On LED Display please NOTE When the digit flash that means you can select this mode and via UP DOWN to choose The display shut off after 30 seconds and when press again it will light up Setting the DMX address DMX MODE ADDR 001 Setting DMX Mode CHANNEL CH 03 Via UP DOWN to select 5channel or 3chan
6. z Fuse F2A 250V Built in scenes amp Sound active DMX control 3 5 channels modes Master and slave control Note All information is subject to change without prior notice
Download Pdf Manuals
Related Search