PA168X IAX2 Phone User Manual
Contents
1. set speakerin X Set initial volume of microphone of the base X is ranged from 0 through 15 set speakerout X Set initial volume of speaker out X is ranged from 0 through 31 set service X Set register the Asterisk Server or not X ranged from 0 through 1 0 do not register 1 register set registerttl X Set register TTL X is range from 10 through 65535 Sec default Beijing Centrality Communication Inc 33 PA168X IAX2 Phone User Manual V1 42 value is 60 Sec set service addr XXXX Set IP address or URI of Asterisk Server set phonenumber XXXXXXXX Set a phone number of PA168X IP phone Value xxxxx must be an Arabic numeral and no longer than 16 characters set account XXXXXX Set the account Value xxxxxx must be an Arabic numeral and no longer than 32 characters set pin XXXXXXXXXX Set the account Value xxxxxx must be an Arabic numeral and no longer than 32 characters set localport XXXX Set register port Value XXXX default is 4569 set dtmf X Set DTMF relay type X is ranged form 0 through 1 0 inband audio 1 outband audio set password XXXX Set password of the PA168X IP phone XXX must be ASCII characters Beijing Centrality Communication Inc 34 PA168X IAX2 Phone User Manual V1 42 set superpassword XXXX Set super password of the PA168X IP phone XXX must be ASCII characters set debug X Set open debugging message output grade for special tool X is ranged from 0 through 5 0 clo2. Other settings Other Settings password 1234 upgrade type disable X upgrade addr sntp ip o 0 0 0 use daylight Lr timezone GNT 08 00 Beijing Hong Kong Urumqi Y Save Settings ddress Book Upgrade Firmware Fig 3 6 Other Setting Page e password Set the password of the phone Default password is 1234 e upgradetype Set the auto upgrade type of the phone a disable Disable auto upgrade Beijing Centrality Communication Inc 19 PA168X IAX2 Phone User Manual V1 42 al pa168X phone will find matching firmware binary file and configuration file of the hardware type only at the FTP server specify by upgradeadar item a mac pa 168X phone will find matching firmware binary file and configuration file of the MAC address only at the FTP server specify by upgradeadar item ppp id pa168X phone will find matching firmware binary file and configuration file of the ppp id only at the FTP server specify by upgradeaddr item a account pa168X phone will find matching firmware binary file and configuration file of the account only at the FTP server specify by upgradeaddr item phonenumber pa168X phone will find matching firmware binary file and configuration file of the phone only at the FTP server specify by upgradeaddr item e upgrade addr Put IP address or domain name obtained by ISP of FTP server supplying upgrade program into this field e nts ip Fill IP address of time server here When network withou
3. then you will hear the record of the dialed call Click to turn the number orderly click to turn the numbers reservedly If there is no record you will hear nothing e When you hear the number you want to dial please press E O place a call directly Note PA168X IP phone supports saving 80 entries unanswered call dialed call Beijing Centrality Communication Inc 41 PA168X IAX2 Phone User Manual V1 42 and received call ranged from 1 80 at best When the entries arrives 80 the latest record will cover the first one The record will be lost when the phone restarts or turned on Beijing Centrality Communication Inc 42 PA168X IAX2 Phone User Manual V1 42 Appendix Table PA168X IP phone digital character key map Keys Press Once Press Twice Press Thrice Press quartic Press quintic 1 1 ul 2 2 Ala B b C c 3 3 D d E e F f 4 4 G g H h Ii 5 5 Jij K k LI 6 6 M m N n O o 7 7 P p Q q R r S s 8 8 Tit U u Viv 9 9 W w X x Yly Z z 0 0 space amp Case change Beijing Centrality Communication Inc 43 PA168X IAX2 Phone User Manual V1 42 Reserves the right to make changes in technical and product specification without prior notice PA168X IAX2 Phone User Manual V1 42 CopyrightO 2003 2005 Beijing Centrality Communication Inc All rights reserved Beijing Centrality Communication Inc 44
4. please select this item to get relevant network parameters auto Then please fill ID and pin into ppp id and ppppin fields e ppp id With pppoe or modem selected in iptype drop down list please enter the user name here e ppp pin With pppoe or modem selected in iptype drop down list please enter the password here e local ip With static ip selected in iptype drop down list please enter IP address of IP phone here e subnet mask With static ip selected in iptype drop down list please enter subnet mask of IP phone here e router ip With static ip selected in iptype drop down list please enter router IP address of IP phone here e dns With static ip selected in iptype drop down list please enter IP address of DNS server here e dns 2 With static ip selected in iptype drop down list please enter IP address of backup DNS server here e mac MAC address is the physical address supplied by the Ethernet Beijing Centrality Communication Inc 12 PA168X IAX2 Phone User Manual V1 42 NIC PA168X phone is shipped from the factory with a unique algorism MAC address printed on the back of the base Audio settings Audio Settings codecl e729 gt codec2 e7231 v codec3 giu v codec etia codecS zs v codecb null v vad IV age D aec Iv audio frames p jitter size p g 723 1 high rate Iv Fig 3 3 Audio Setting e codec Set the priority 1 of the audio compression algorithm options are g7
5. IAX2 Phone User Manual V1 42 Command ping Syntax description ping IP address Usage ping IP address of other NAT device Relevant usage In telnet window input ping xx xxx xx xx an IP address and return then the result will be displayed If the address is effective ping OK will be seen if the address is ineffective nothing will be seen Fox example P gt ping 203 93 9 57 P gt ping OK P gt ping 27 56 120 56 P gt yNote Usually the echo time of ping command is no more than 1 second So if the result is not displayed in 5 seconds ping command is fail ftp command Syntax description ftp value Usage the system connects to the FTP server auto to get the corresponding file and deal with it Relevant usage ftp X X ranged from 0 through 2 X 0 Connect to FTP Server to get the file of updating program and save it to the SDRAM of the phone Then the file can be read by PalmTool This operation aims at testing X 1 Connect to FTP Server to get the file of updating program and Beijing Centrality Communication Inc 37 PA168X IAX2 Phone User Manual V1 42 update program Flash This operation aims at updating program X 2 Connect to FTP Server to get the file of updating dial rules and update program Flash This operation aims at updating dial rule yNote When you use ftp 0 and ftp 1 commands if the file get from FTP server is too large or the net speed is too slow then the process will not be see
6. enable please set the prefix to pick up inner line such as 0 set callwait X Set whether to use call wait X ranged from O to 1 0 do not use call wait 1 use call wait set fwdnumber XXXXXXX Set receiving forwarded calls phone number XXXX must be an Arabic numeral and no longer than 16 characters set fwdalways X Enable disable forward all calls X is ranged from 0 through 1 0 do not forward all calls 1 forward all calls set fwdbusy X Enable disable forward calls if busy X is ranged from 0 through 1 0 do not forward calls if busy 1 forward call if busy set fwdnoanswer X Enable disable forward calls without replying X is ranged from 0 through 1 0 do not forward calls without replying 1 forward call without replying set answer X Set the ring seconds before the phone answers the call auto or forward the calls X is ranged from 0 through 60 set digitmap X Beijing Centrality Communication Inc 32 PA168X IAX2 Phone User Manual V1 42 Set whether to use digitmap X ranged from 0 to 1 0 do not use digitmap 1 use digitmap set handsetin X Set initial volume of handset X is ranged from 0 through 15 set handsetout X Set initial volume of handout X is ranged from 0 through 31 set ringtype X Set types of ring X is ranged from 0 through 3 0 ring as ordinary rings in different frequency 1 do not ring 2 ring as music saved by user 3 Set ring used the individualized tone provided by system need system support
7. forward the calls Beijing Centrality Communication Inc 16 PA168X IAX2 Phone User Manual V1 42 e Use digitmap Enable disable digit map by checking unchecking the box e handsetin Set the volume of handset input e handset out Set the volume of handset output e ring type Set ring type by selecting corresponding item from drop down list m dtmf Set ring as ordinary rings in different frequency m not disturb Set the phone do not ring by selecting this item m user define Set ring as music saved by user by selecting this item m Advanced Set the ring used the individualized tone provided by system need system support e speaker out Set the volume of handfree output e speaker in Set the volume of handfree input Protocol Setting IAX2 Protocol Settings use service Iv service addr www iax2 com register ttl feo phone number 8870054 account fesroosa Ct pin jaiseeso77 locel port poen dtnf inband audio v super password 12345678 debug output v Fig 3 5 Protocol Setting Beijing Centrality Communication Inc 17 PA168X IAX2 Phone User Manual V1 42 e use service Enable disable service by checking clearing this box To make calls through Asterisk Server please check this box otherwise phone can only make IP to IP calls e service addr If use service is checked please set the URI of the Asterisk Server into service addr e register ttl IP phone
8. 0 31 ps ring type atn speaker out 0 31 speaker in 0 15 Fig 3 4 Phone Setting e use dialplan Set whether use dial plan or use dial number by selecting the corresponding item in drop down list Beijing Centrality Communication Inc LIS E PA168X IAX2 Phone User Manual V1 42 m disable Do not use dial plan or dial number by selecting this item m enable Use dial plan by selecting this item m dialnum Use dial number by selecting this item With this item selected please enter the dial prefix into dial number field m prefix Use specially service by selecting this item m Hotline Use Hotline function by selecting this item With this item selected please enter the hotline number into dial number field e dial number With dialnum selected in use dialplan drop down list please enter the dial prefix into this field according to requirement of log in server e ddd code With enable or dialnum selected in use dialplan drop down list set area code according to E 164 dial rule For example Beijing is 10 Shanghai is 21 e idd code With enable or dialnum selected in use dialplan drop down list set country code according to E 164 dial rule For example China is 86 U S A is 1 e idd prefix With enable or dialnum selected in use dialplan drop down list set international call prefix according to E 164 dial rule such as 00 e ddd prefix With enable or dialnum selected in use dialplan drop down list set l
9. 29 g7231 g711u g711a and gsm e codec2 Set the priority 2 of the audio compression algorithm options are g729 g7231 g711u g711a and gsm e codec3 Set the priority 3 of the audio compression algorithm options are g729 g7231 g711u g711a and gsm e codec4 Set the priority 4 of the audio compression algorithm options are g729 g7231 g711u g711a and gsm e codecb Set the priority 5 of the audio compression algorithm options are g729 g7231 g711u g711a and gsm e codec6 Set the priority 6 of the audio compression algorithm Beijing Centrality Communication Inc The The The The The The PA168X IAX2 Phone User Manual V1 42 options are g729 g7231 g711u g711a and gsm e vad Enable disable VAD voice activity detection e agc Enable disable AGC e aec Enable disable VEC e audio frame Set audio frames in RTP package Minimum is 1 and maximum is 8 e jitter size Set buffer size of RTP package The value range is 0 32 e g 723 1 high rate enable disable g 723 1 high rate G 723 1 high rate is 6 3kbps low rate is 5 3kbps phone settings Phone Settings use dialplan disable dial number 12345 ddd code idd code ped idd prefix mz ddd prefix inner line disable gt inner line prefix p call waiting forward namber fwd poweroff D fwd noanswer fwd always Li fwd busy rj answer use digitmap D handset in 0 15 EE handset out
10. PA168X IAX2 Phone User Manual V1 42 PA168X IAX2 Phone User Manual gt PAT168X IP phone Appearance Introduction esses 2 gt Function Keys of PA168X IP Phone Introduction sses 3 Pr Wealulessccstc devel aita d dicite nea D dre s 4 landaard and Protocol a eade eee eee aee Rees 5 gt Operating requirements esses eene ntn innen entere enne 6 gt Electric requirements sees esee nn reete teinte reete enne 6 Pe ABIZei tete terae dit ade matu aiv adu ove tue att 6 x nslallallon c sesso eee a ee eee Ie dated aede 6 P SB COUCH EE 7 Phone Keypad set d RR RON I I ERI nd 7 m uGonfigured Dy WEB 0 3 iai taie ele dieit ae ePi 10 Telnet COUINO oaa se cd the da t i RR Slaw When ode t b e eR P Rd 22 gt Upgrade PAT168X IP phone eene nnne enne entente 38 Usage OF Ne pliones uc s RO RR ERS EU ERREUR OUR OU 39 Beijing Centrality Communication Inc PA168X IAX2 Phone User Manual V1 42 gt PA168X IP phone Appearance Introduction e PA168X IP Phone Front Illustration Refer to Fig 1 1 LCD Display Missed a Received Out TRAMEFER Redial Speaker Call Fig 1 1 PA168X IP Phone Front Illustration e PA168X IP Phone Back Illustrations Refer to Fig 1 2 Beijing Centrality Communication Inc Set Backspace Vol Vol Phone book Flash Hold Transfer PA168X IAX2 Phone User Manual V1 42 Power Jack To network To PC Fig 1 2 PA168X Phone Bac
11. Setting Page using ordinary pin with Debug set as O disable e Update Click this button to save the configuration and the phone will reboot Once the phone reboots successfully the new configuration is effective yNote After entering set page if Update button is not clicked within 10 minutes then when you click it again the index page asking for pin will pop up again Then please input the password again to enter the set page and then click Update button to confirm the modification Beijing Centrality Communication Inc 21 PA168X IAX2 Phone User Manual V1 42 Phone Book Click this button to open the speed dial settings page Please refer to Fig 3 7 In this page you can set and save the speed dial number by typing the name into the Name field and then entering the corresponding number following the name For example input Jack in Name field following 001 and then input 5989426454 into Phone number field Then Jack s number 5989426454 is saved in phone book Then please click Save Back button In normal state you can use speed dial to call numbers saved in phone book No 001 003 005 DOT 009 Phone Book Phone Number No Name 989426454 ow uen its ple 004 e Ce E 008 i a 010 D HM Fig 3 8 Phone Book Illustration Phone Number 192 168 1 56 m r e rT Upgrade Program Click this button to update the program of IP phone Update Digitmap C
12. Talk card used please set it as 00 When set dialplan value set as 4 please use this command to set hotline number set dddcode XX Set the area code when set dialplan value set as 1 or 2 For example the area code of Beijing is 10 the area code of Shanghai Beijing Centrality Communication Inc 30 PA168X IAX2 Phone User Manual V1 42 is 21 and the area code of Chengdu is 28 etc Parameter xxx must be an Arabic numeral and no longer than 3 characters set iddcode XXX Set the country code when set dialplan value set as 1 or 2 For example the country code of China is 86 the country code of USA is 1 etc Parameter xxxx must be an Arabic numeral and no longer than 4 characters set iddprefix XX Set IDD service prefix number when set dialplan value set as 1 or 2 For example IDD service prefix number of china is 00 IDD service prefix number of USA is 1 etc Parameter xxx must be an Arabic numeral and no longer than 3 characters set dddprefix XX Set DDD service prefix number when set dialplan value set as 1 or 2 For example DDD service prefix number of china is 0 DDD service prefix number of USA is 1 etc Parameter xxx must be an Arabic numeral and no longer than 3 characters set innerline X Set use innerline call or not X ranged from 0 through 1 0 disable 1 enable innerline call set innerlinepreifx X Beijing Centrality Communication Inc 31 PA168X IAX2 Phone User Manual V1 42 With innerline set as 1
13. ble innerlineprefix 0 callwaiting 1 disable fwdnumber 82378009 fwdpoweroff 1 enable fwdalways 1 enable fwdbusy 1 enable fwdnoanswer 1 enable answer 30 digitmap 1 enable handsetin 5 handsetout 20 ringtype O dtmf speakerout 20 speakerin 1 serene Protocol Settings service 1 enable registerttl 60 serviceaddr 203 93 9 57 phonenumber 82378801 account empty pin empty localport 1732 dtmf O inband audio dicii iid OTOL Settings eee superpassword 12345678 debug 1 output password 1234 upgradetype O disable upgradeaddr empty sntpip 0 0 0 0 daylight O disable timezone 55 GMT 08 00 Beijing Hong Kong Urumqi Input ordinary password with debug set as O disable following information will Beijing Centrality Communication Inc 25 PA168X IAX2 Phone User Manual V1 42 be seen PA168X V1 42 settings Password P gt get s Network Settings iptype O static ip 192 168 1 100 subnetmask 255 255 255 0 dns 202 106 46 151 dns2 202 96 128 68 seii Audio Settings rrr router 192 168 1 254 mac 00 0d ea 00 00 03 codec1 0 g729 codec2 1 g7231 codec3 2 g711u codec4 3 g711a codec5 4 gsm codec6 6 null vad 1 enable agc O disable aec 1 enable audioframes 2 Jittersize 0 6 3k 1 enable ss Phone Settings dialplan 1 enable dddcode 10 iddcode 86 iddprefix 00 dddprefix 0 innerline 1 enable innerlineprefix 0 callwaiting 1 enable fwdnumber 82378009 fwdpoweroff 1 enable fwdalways 1 enable fwdbusy 1 enabl
14. dset and begin speaking When the call is over put the handset back Handset to hand free While receiving call with handset press sw on the keypad and then put down the handset When the call is over sae fagain E Hand free to handset While receiving the call with sone pressed press Hand free Press to speak to the other party When the call is over press again pick up the handset to continue the call When the call is over put back the handset Beijing Centrality Communication Inc 39 PA168X IAX2 Phone User Manual V1 42 Note When you communicate with the other party without lifting the handset please do not exceed 40 CM from speaker gt Place a call Call another PA168 IP phone under the Asterisk Server Handset Pick up the handset and listen for the Internet dial tone Then to dial the phone number you wish to call and press or E end the dialing Once the call connection has been established and the ring tone has sounded wait for the other party to answer When the other party answers you can begin speaking When the call is over put back the handset The dialed number has been saved into the buffer input the phone number you wish to call and press and listen for the Internet dial tone Then end the dialing Once the call connection has been established and the Hand free Press or to ring tone has s
15. e fwdnoanswer 1 enable answer 30 digitmap 1 enable handsetin 5 handsetout 20 ringtype O dtmf speakerout 20 speakerin 1 reeeo Other Settings ee password 1234 upgradetype O disable upgradeaddr empty sntpip 0 0 0 0 daylight O disable timezone 55 GMT 08 00 Beijing Hong Kong Urumdi Command set Syntax description set keywords value Usage Used to configure password and other running parameters of PA168X IP phone Detailed description set iptype X Beijing Centrality Communication Inc 26 PA168X IAX2 Phone User Manual V1 42 Set how IP phone gets relevant network parameters X ranged from 0 through 3 0 authorize users set IP address subnet mask and router IP address of IP phone manually 1 use DHCP mode With this system your LAN or router automatically assigns all the required network parameters to any device connected to it when the device log on PA168X IP phone is shipped from the factory with DHCP on So if your LAN or router is configured to use DHCP addressing the IP phone s LAN parameters will automatically be configured as soon as it is connected to the LAN or router and powered up 2 use PPPoE mode Those ADSL and Cable Modem users please select this item for it is a protocol especially designed for them With this system ADSL ISP automatically assigns all the required IP parameters to any device connected to it when the device log on 3 use modem mode Those who use IP phone with modem please
16. eijing Centrality Communication Inc 10 PA168X IAX2 Phone User Manual V1 42 The following configured page wills popup Refer to Fig 3 1 please Network Setting Network Settings iptype static x ppp id Ppp pin local ip 192 168 1 100 subnet mask 255 255 255 0 router ip 192 168 1 254 dns 202 106 46 151 dns2 202 96 128 68 mac 00 Od ea 00 00 03 Fig 3 2 Network Setting e iptype Set how IP phone gets relevant network parameters by selecting corresponding item from drop down list m static ip Select this item to authorize users set IP address subnet mask and router IP address of IP phone manually m dhcp Select this item to enable DHCP mode With this system your LAN or router automatically assigns all the required network parameters to any device connected to it when the device log on PA168X IP phone is shipped from the factory with DHCP on So if your LAN or router is configured to use DHCP addressing the IP phone s LAN parameters will automatically be configured as soon as it is connected to the LAN or router and powered up m pppoe Those ADSL and Cable Modem users please select this item for it is a protocol especially designed for them With this system ADSL ISP automatically assigns all the required IP parameters to any device connected to it when the device log on Beijing Centrality Communication Inc 11 PA168X IAX2 Phone User Manual V1 42 m modem If the IP phone used with modem
17. ings of IP phone following keys will be used Keys Function Keys Function Enter the menu and Becomes to modify the appearance Menu Enter Set confirm Delete and back Turn over menu backward Backspace Vol upper menu Turn over menu forward Keypads Modify values Vol Refer to above operation you can reach any menu to modify any value Please refer to following structure illustrations to learn the values of each menu item As for the meaning of each item and value please refer to Web Browser Setting chapter Beijing Centrality Communication Inc ig PA168X IAX2 Phone User Manual V1 42 e Menu Structure Fig 2 1 Main Menu structure Illustration Fig 2 2 Network submenu structure Illustration Fig 2 3 Audio submenu structure Illustration Beijing Centrality Communication Inc PA168X IAX2 Phone User Manual V1 42 Fig 2 4 Phone submenu structure Illustration Fig 2 5 Protocol submenu structure Illustration Fig 2 6 other submenu structure Illustration Beijing Centrality Communication Inc PA168X IAX2 Phone User Manual V1 42 Fig 2 7 advanced submenu structure Illustration gt Configured by WEB Double click E icon to open the IE browser Input the IP address of the phone into address bar Address 192 168 1 100 and then input password of the phone into the following page Network Settings iptype static v ppp id cs PPP pin ee 9 33 local i
18. k Illustration Function Keys of PA168X IP Phone Introduction Keys Function Keys Function With handset hung press this key With handset hung press this Local IP to display local IP address on LCD key to review missed number With handset hung press this key With handset hung press this Phone Received number to display phone number on LCD key to review received number With handset hung press this key to With handset hung press this Menu menu mode Enter the menu mode key to review dialed number Enter press this key to next menu and confirm Enter the menu mode press this key While reviewing missed Set Redial received or dialed number becomes to modify the appearance press this key to dial current number Enter the menu mode press this key to Press this key to have a call Backspace Speaker back upper menu or delete without lifting the handset Volume With handset picked press this key to Increase the volumes of handset With pressing Beijing Centrality Communication Inc 3 PA168X IAX2 Phone User Manual V1 42 speaker press this key to Increase the volumes of speaker With pressing missed or received or out and then press this key to turn over the record backward Enter the menu mode press this key to turn over the item backward With handset picked press this key to decrease the volumes of handset With pressing Speaker press this key to decrease the volume
19. lick this button to update the digitmap of the phone gt Telnet Configuration e On the PC choose Start gt Run and then type telnet 192 168 1 100 into Run field in popuping Run dialog Or input telnet 192 168 1 100 in the DOS window Then the following information will be displayed PA168X V1 42 settings Beijing Centrality Communication Inc 22 PA168X IAX2 Phone User Manual V1 42 Password Then please type password With debug is set as O disable if type ordinary password default one is 1234 after Retun you will see Password P gt If you type super password then you will see Password kkkkkkkk P gt Above information indicates that IP phone is under setting mode and then you can set the PA168X IP phone by using the telnet commands PA168X Telnet Commands Explanation PA168X Telnet Commands Command Function Supply command name and parameters get Display basic parameters of the PA168X IP phone set Set parameters of the PA168X IP phone store Save current settings to designated position load Load designated settings to current position exit Exit from the setting mode without saving the configuration write Exit with saving all configurations and restart PA168X Beijing Centrality Communication Inc 23 PA168X IAX2 Phone User Manual V1 42 ping Ping other net parameter ftp The phone connects to FTP server and then get the files Detail description of PA168X Telnet commands C
20. n in telnet window Please be patient Using ftp command in telnet to get file spends almost same minutes as getting file using phone So if nothing is displayed after too long time it means that ftp is fail yNote All the Telnet commands of PA168X IP phone should be written in low case and the password is case sensitive Upgrade PA168X IP phone Set FTP server FTP server can be supplied by the server provider as well as setup by the users in LAN Please set the IP address of FTP server Prepare Updated program You can ask the server provider for the latest version of program or visit www aredfox com to download the latest version Operation If you have got the IP address of the FTP server from ISP please do as follows a Use keypad to enter setting mode b Use keypad to input the IP address of FTP server Beijing Centrality Communication Inc 38 PA168X IAX2 Phone User Manual V1 42 c Press p ise then No19 light will blink twice a second Once the phone restarts successfully the new program is effective Note Please do not change the name of the upgraded program or the operation will be fail Usage ofthe phone gt Receiving calls PA168X IP phone can receive incoming calls from other PA168X IP phone and devices that support the IAX2 protocol It works just like an ordinary phone for incoming calls When it rings you can receive the call by following methods Use handset Lift the han
21. ommand Syntax description No optional parameter Usage Type command name and parameters following P gt Be used as the keyword to supply keyword and parameters of the relevant commands Relevant usage None Detailed description List help of all commands For example P gt set get list settings store x store current to xth settings load x load xth settings to current exit write save settings Command get Syntax description No optional parameter of keywords Usage Display basic parameters of the PA168X IP phone Relevant usage None Detailed description Beijing Centrality Communication Inc 24 PA168X IAX2 Phone User Manual V1 42 get Display basic running parameters of the PA168X IP phone Input ordinary password without debug being set as O disable or input super password with debug set as O disable then following parameters of IP phone will be displayed PA168X V1 42 settings Password P get Fk kA Network Settings n iptype O static ip 192 168 1 100 subnetmask 255 255 255 0 router 192 168 1 254 dns 202 106 196 152 dns 2202 106 196 115 mac 00 09 45 65 a3 e6 Mk 44 A ydjo Settings codec1 0 g729 codec2 1 g7231 codec3 2 g711u codec4 3 g711a codec5 4 gsm codec6 6 null vad 1 enable agc O disable aec 1 enable audioframes 1 Jittersize 0 6 3k 1 enable ooooo Phone Settings rr dialplan 1 enable dddcode 10 iddcode 86 iddprefix 00 dddprefix 0 innerline 1 ena
22. ong distance call prefix according to E 164 dial rule such as O Note With dialnum seletcted in use dialplan drop down list you can also set dddcode iddcode iddprefix and dddprefix according to requirement of system Beijing Centrality Communication Inc 15 PA168X IAX2 Phone User Manual V1 42 e innerline Enable disable innerline call by selecting corresponding items from dropdown list disable Disable call innerline by selecting this item enable enable call innerline by selecting this item e innerlineprefix With enable selected in innerline dropdown list please fill the prefix number pick up to inner line such as O e Call waiting Enable disable call waiting by checking unchecking the box e forward number Enter receiving forwarded calls phone number into this field If the IP phone used with modem with modem item selected in iptype list box and then fill ISP number into this field e fwd noanswer Forward calls without replying by checking this box Please enter receiving forwarded calls phone number into fwd number field e fwd always Forward all calls by checking this box Please enter receiving forwarded calls phone number into fwd number field e fwd busy Forward calls if busy by checking this box Please enter receiving forwarded calls phone number into fwd number field e answer Enter a number from O through 60 to set the entries of the seconds before the phone answer the call auto or
23. otocol e VAD CNG save bandwidth Beijing Centrality Communication Inc PA168X IAX2 Phone User Manual V1 42 e DHCP Dynamic Host Configuration Protocol e PPPoE PPP Protocol over Ethernet e DNS Domain Name Server e Telnet Internet s remote login protocol e FTP File Transfer protocol e HTTP Hyper Text Transfer protocol Operating requirements e Operation temperature 0 to 50 C 32 to 122 F e Storage temperature 30 to 65 C 22 to 149 F e Humidity 10 to 90 no dew gt Electric requirements e Voltage 9V DC e Power 9W max e Power adapter AC DC input 100 230V output 9V 1A e Network interface 2X RJ 45 Ethernet Connectors gt Size 200 x 180 x 85 mm L x W x H Installation 1 Connect handset to base insert handset cord into handset cord jack at the Beijing Centrality Communication Inc 6 PA168X IAX2 Phone User Manual V1 42 left side of the base 2 Connect IP phone to Internet plug the RJ 45 Ethernet cable into the Ethernet Jack Plug the other end of the cable into HUB switch 3 Power on IP phone plug the power cord adapter into the Power Jack Then plug the other end of the power cord adapter into the appropriate wall outlet Configuration Three ways of configuring the PA168X IAX2 phone are available phone keypad web browser Telnet commands gt Phone Keypad setup e Function Keys Introduction When using keypad and LCD to configure the sett
24. ough 4 0 g729 1 g7231 2 g711u 3 g711a 4 gsm set codec4 X Set the priority 4 of the audio compression algorithm X is range from 0 through 4 0 g729 1 g7231 2 g711u 3 g711a 4 gsm set codecd X Set the priority 5 of the audio compression algorithm X is range from O through 4 0 g729 1 g7231 2 g711u 3 g711a 4 gsm set codec6 X Set the priority 6 of the audio compression algorithm X is range from 0 through 4 0 g729 1 g7231 2 g711u 3 g711a 4 gsm set vad X Enable disable VAD X is ranged from 0 through 1 0 disable VAD 1 enable VAD set agc X Enable disable AGC X is ranged from 0 through 1 0 disable AGC 1 enable AGC set aec X Enable disable AEC X is ranged from 0 through 1 0 disable AEC Beijing Centrality Communication Inc 29 PA168X IAX2 Phone User Manual V1 42 1 disable AEC set audioframes X Set audio frames in RTP package X is Arabic numerals between 0 and 7 set jittersize X Set buffer size of RTP package X is range from 0 32 set 6 3k X With G 7231 set PA168X IP phone to use 6 3K rate or not X is ranged from O through 1 0 use 6 3K rate 1 use 5 3K rate set dialplan X Enable disable dial plan and dial number Parameter X ranged from O through 4 0 disable dial plan 1 enable dial plan 2 use dial number 3 use 179XX service 4 use hotline function set dialnumber XX When set dialplan value set as 2 please use this command to set dial number For example with e
25. ounded wait for the other party to answer When the other party answers you can begin speaking When the call is over Press seer again The dialed number has been saved into the buffer Blind dialing Use the keypad to enter the phone number you wish to connection has been established and the ring tone has sounded wait call and then press or to make the call Once the call for the other party to answer When the other party answers you can seater again The begin speaking When the call is over Press Beijing Centrality Communication Inc 40 PA168X IAX2 Phone User Manual V1 42 dialed number has been saved into the buffer e Place a call without login the Asterisk Server If PA168X IP phone does not login the SIP proxy you can place a call by address of the other party and then pressing lifting the handset or pressing and then inputting the IP or calling View Records e View missed calls cue e to turn the numbers orderly click De then you will hear the record of missed call Click to turn the numbers reservedly If there is no record you will hear nothing e View received call a Click reservedly If there is no record you will hear nothing then you will hear the record of the received call to turn the numbers to turn the number orderly cick vo e View dialed number Click
26. p 192 168 1 100 subnet mask 255 255 255 0 router ip 192 168 1 254 dns 202 106 46 151 dns2 202 96 128 68 mac o0 09 45 04 25 78 Audio Settings codecl 2729 x codec2 g1231 x codec3 gTllu x codec grita codec5 esn x codec null z vad IV age ri aec Iv audio frames iz jitter size D g 723 1 high rate Vv Phone Settings use dialplan disable v dial number ier ddd code pm idd code jese idd prefix n ddd prefix Bed inner line disable gt inner line prefix lo call waiting Li forward mmber fwd poweroff ri fwd noanswer ri fwd always rj fwd busy a answer fo use digitmap D handset in 0 15 1 handset out 0 31 po ring type not disturb v speaker out 0 31 fo speaker in 0 15 fa IAX2 Protocol Settings use service lv service addr mm iax2 com o register ttl go phone number 8870054 account s870054 pin faiseee077 local port poe dtmf inband audio gt super password 12345678 debug output v Other Settings password i334 upgrade type disable x upgrade addr preme sntp ip 000 use daylight ri timezone GMT 08 00 Beijing Hong Kong Urumqi Y Save Settings Address Book Upgrade Firmware Fig 3 1 Http Setting co Default password 1234 is ordinary password and super password is 12345678 With Debug set O disable please input super password while Debug is not set as O disable please input ordinary password Then clickL button B
27. s of speaker Volume With pressing missed or received or out and then press this key to turn over the record forward Enter the menu mode press this key to turn over the item forward Features Hardware e Main chip PA1688 50MHz e Data Memory 2MB SDRAM e Program Memory 2 MB Flash memory e Ethernet Jack 2X 10 100M jacks e AC DC adapter Input AC100 230V Output 9V DC 1A Software e DHCP support for LAN or Cable modem e PPPoE support for ADSL or Cable modem e Set phone by HTTP web browser IE6 0 or Telnet e Upgrade by FTP Beijing Centrality Communication Inc 4 PA168X IAX2 Phone User Manual V1 42 e Support major G 7XX GSM610 audio codec e VAD Voice active detect e CNG Comfort noise generation e Dynamic voice jitter buffer e G 168 165 compliant 16ms echo cancellation e Tone generation and Local DTMF re generation according with ITU T e E 164 dial plan and customized dial rules e 100 entries for quick dial e 80 entries each for missed calls answered calls and dialed calls e Adjustable volume for both handset and speaker e Voice prompt e Hotline Standard and Protocol PA168X IP Phone supports following standard and protocol e EEE 802 3 802 3 u 10 Base T 100Base TX e Major G 7XX GSM610 audio codec e AX2 Inter Asterisk eXchange V2 e TCP IP Internet transfer and control protocol e RTP Real time Transport Protocol e RTCP Real time Control Pr
28. se debugging output 1 output the operation information to the window 2 output all the bug information and data in test window 3 save the bug information into SDRAM 4 disable checks the mark set upgradetype X Set auto upgrade matching type X is range from O through 5 Q disable 1 all 2 mac 3 ppp id 4 account set upgradeaddr XXX XXX XXX XXX Set IP address or domain name of FTP server supplying upgraded program of PA168X IP phone set ntsip XOOXOOOX XXX XXX Set IP address of timeserver set daylight X Set use daylight or not X ranged from O0 through 1 0 do not use Beijing Centrality Communication Inc 35 PA168X IAX2 Phone User Manual V1 42 daylight 1 use daylight set timezone XX Set time zone Command store Syntax description no keyword Parameter ranged from 0 through 4 Usage Save the current settings to the designated position Relevant Usage store 1 Command load Syntax description no keyword Parameter ranged from 0 through 4 Usage Load the designated settings to the current position Relevant Usage load 1 Command exit Syntax description no keyword and parameter Usage Exit from Telnet command window without saving the configuration Relevant usage None Command write Syntax description No keyword and parameter Usage Save the configuration and restart the PA168X IP phone Beijing Centrality Communication Inc 36 PA168X
29. set the value as 3 set pppid XXX With iptype set as 2 use this command to set ADSL ID with iptype set as 3 use this command to set Modem ID set ppppin XXX With iptype set as 2 use this command to set ADSL pin with iptype set as 3 use this command to set Modem pin set ip XXX XXX XXX XXX Beijing Centrality Communication Inc 27 PA168X IAX2 Phone User Manual V1 42 With iptype set as 0 use this command to set IP address of PA168X IP phone set subnetmask XXX XXX XXX XXX With iptype set as 0 use this command to set subnet mask of PA168X IP phone set router XXX XXX XXX XXX With iptype set as 0 use this command to set router IP of network with PA168X IP phone set dns XXX XXX XXX XXX With iptype set as 0 use this command to set IP address of DNS server set dns2 XXX XXX XXX XXX With iptype set as 0 use this command to set IP of backup DNS server set mac XX XX XX XX XX XX Set MAC address of the PA168X IP phone Parameter XX XX XX XX Xx xx must be an HEX number set codec1 X Set the priority 1of the audio compression algorithm X is range from 0 through 4 0 g729 1 g7231 2 g711u 3 g711a 4 gsm set codec2 X Beijing Centrality Communication Inc 28 PA168X IAX2 Phone User Manual V1 42 Set the priority 2 of the audio compression algorithm X is range from 0 through 4 0 g729 1 g7231 2 g711u 3 g711a 4 gsm set codec3 X Set the priority 3 of the audio compression algorithm X is range from 0 thr
30. t Internet connect Fill special IP address 255 255 255 255 e use daylight Enable disable daylight Beijing Centrality Communication Inc 20 PA168X IAX2 Phone User Manual V1 42 e timezone Select correct time zone in list box When debug set as O disable if input ordinary password default one is 1234 then following page will pop up after clicking LL 2 And only those parameters can be modified Network Settings iptype static ppp id Ppp pin local ip 192 168 1 100 subnet mask 255 255 255 0 router ip 192 168 1 254 dns 202 106 46 151 dns2 202 96 128 68 mac 00 Od ea 00 00 03 Audio Settings codec e7231 gt codec2 nai gt codec3 null v codect mii gt codec5 nai gt codec amp nai vad Iv agc a aec IV audio frames jitter size p g 123 1 high rate ri Phone Settings use dialplan dialnun v dial number puio oo ddd code jo idd code je idd prefix po ddd prefix p inner line disable gt inner line prefix p call waiting Lj forward mmber fwd poweroff O fwd noanswer r1 fwd always Oo fwd busy ri answer NN use digitmap O handset in 0 15 15 handset out 0 31 29 ring type dtmf speaker out 0 31 22 speaker in 0 15 fa Other Settings password 23313 upgrade type phonenumber gt upgrade addr sntp ip 220 236 44 236 use daylight O timezone GMT 08 00 Yakut sk E Save Settings Address Book Upgrade Firmware Fig 3 7
31. will send a keep alive registration message to Asterisk Server every register ttl seconds The minimum value is 10 maximum value is 65535 Default is 60 e phone number The local phone number of this phone usually is allocated by system e account With Asterisk Server system which requires authentication please put the username account into this field e pin With Asterisk Server system which requires authentication please put the password into this field e local port The local UDP port registered with Asterisk Server to accept incoming handshaking messages The default port number is 4569 e dtmf Set DTMF signal sending way by selecting inband audio outband audio from list box Beijing Centrality Communication Inc 18 PA168X IAX2 Phone User Manual V1 42 e super password Set the super password of the phone Default super password is 12345678 e debug Set the debug level of the phone disable Disable output the debug message by selecting this item output Output the operation information to the window such as register input by selecting this item output all Output all debug information and data in test window by selecting this item remote debug Save the debug information in SDRAM of IP phone by selecting this item a no check Disable checking firmware tags when upgrading This is not suggested because it will increase the risk of upgrading the wrong firmware into the phone
Download Pdf Manuals
Related Search