Home

Saveo-Scan-R11D

1. retractable arm before placing phone in holder and then pushing it firmly back against the phone Extend retractable arm Press button and slide outwards to extend the arm Insert phone Secure phone in holder Retract the arm until phone is held firmly in place Sane SCAN Connect phone to scanner with Micro USB cable As USB connection locations vary on different models of smartphone the cable can be configured for your specific model Sane SCAN Switch scanner to Operation Mode Data transmis sion via USB OTG Switch to left Operation Mode Scan the Wired OTG Communication barcodes below Confirm scanner is connected Saveo Scan is detected by your smartphone as an external keyboard A message will appear on screen to notify you that a USB device has been connected You are now connected Start scanning 8 Sone SCAN Switch scanner to Charge Mode Bluetooth Mode Switch to right Charge Mode Scan the Wireless BT Communication barcodes below When Bluetooth is enable the LED will remain red until the scanner has been paired with a Bluetooth device Enable Bluetooth on your device Go to your phone s homescreen and find Settings then Bluetooth and turn Bluetooth on Searching ta T 73 m ecco 3 UK iia 274 mO Sottings Settings Bluetooth Airplane Mode 2 Bluetooth lt gt wr ON gt Bluet
2. SoNn 0 SCAN Scanning with Simplicity SAVEO SCAN R11D BH Sane SCAN Product Information 3 Getting Started 4 Operating Elements 5 Connecting via USB OTG 8 Connecting to iOS via Bluetooth 9 Connecting to Android via Bluetooth 12 Unpairing your device 15 Operating Modes 16 Reset to Defaults 18 LED Indicator 19 Battery Level Status 19 Power Saving Mode 20 Further Information 21 Sane SCAN Delivery contents SAVEO SCAN R11D BH scanner x 1 Charging Cradle x 1 Micro USB cable x 1 Quick instructions x 1 Limited Warranty Saveo Scan provides a one year limited warranty This warranty does not cover any product which has been subject to improper use neglect or unauthorized repair or installation This warranty does not cover consumable parts Cables amp batteries are consumables Safety instructions Read the operating instructions carefully and pay special attention to the safety information If you do not follow the safety instructions and information on proper handling in this manual we assume no liability for any resulting personal injury or damage to property The product is equipped with a laser for aiming use Never look into the laser beam and never point it at people or animals Laser radiation can seriously damage your eyes Do not point the laser beam at mirrors or other reflective surfaces The uncontrolled reflected beam may strike people or animals Don t put sc
3. anner in places of excessively high temperature such as exposure to direct sunlight Don t use scanner in extremely humid conditions or in conditions of extreme temperature change The rechargeable battery is permanently built into the product and cannot be replaced Never damage the rechargeable battery Damaging the casing of the rechargeable battery might cause explosion or fire Sane SCAN Switch on and Charge your Scanner Please switch on your scanner as illustrated and place it in the cradle to charge for 3 4 hours before first use If you want to charge smartphone and scanner simultaneous ly please switch scanner to Charge Mode before placing it in the cradle Power on Saveo Scan On the underside of the scanner you will find a small recessed button Use a pen or paper clip to push the button until you hear a notification sound Ensure power switch remains depressed after you release it Power Switch Power switch is located on the underside of the scanner Sane SCAN Please remove the protective sticker from window before use Universal Holder Exit Window Trigger Power On button Wrist Strap Micro USB Cable Use Micro USB cable to connect to smartphone tablet Switch for Operation Mode and Charge Mode Bluetooth Mode LED indicator Charging Cradle Sane SCAN Attaching your smartphone to scanner using the universal holder Extend the
4. lowed by 3 beeps 17 Sane SCAN Reset Configuration to Defaults scan from A1to A6 HID Profile A3 A4 A5 A6 Al A2 Sane SCAN LED Indicator LED Indicator Information Orange LED ON Full charged Orange LED Flashing Charging Low battery Red LED ON Offline Out of Range Green LED ON Good read Orange LED ON Good read Batch mode Scanner should be charged immediately If scanner shuts down it is recommended to charge it fully then power it back on Under power saving mode there will not be an LED indica tion when charging If you want to know the charge status press the trigger and the LED will display status Battery Level Status Scan the following barcode to send battery level information to your device The format is outlined in the table below Current Battery Level Scan to receive the current battery level WAAAN 80 100 WAZBA 55 80 WAQA N 30 55 A1A 10 30 WADAN under 10 Sane SCAN Power saving mode is enabled by default and will put the scanner to sleep after 1 minute s inactivity To wake up the scanner press the trigger Below are the barcodes to disable enable power saving mode Disable Scan to disable power saving mode Enable Scan to enable power saving mode 20 Sane SCAN Full User Manual and Spec sheet can be downloaded at www saveoscan com downloads For more info
5. m list of paired devices Bluetooth on Devices R A0ODFF6 Connecte e Now Discoverable Choose Forget this Device Unpair 15 Sane SCAN There are two operating modes on the scanner Data trans mission mode and Data Storage Mode Scan the appropriate barcodes when switching between these two modes Please note Switching between modes will wipe the scanner s internal memory Data Transmission Mode Default Our Default setting is Data Transmission mode In this mode data will be sent to smartphone tablet directly To enter Data Transmission Mode please scan the follwing barcodes Enter Data Transmission Mode Green Orange LED flashes followed by 3 beeps Sane SCAN Data Storage Mode In this mode data will be saved directly to scanner s memory Scan Transmit Memory Data to receive data stored on scanner s internal memory To enter Data Storage Mode please scan the follwing barcodes Enter Data Storage Mode Green Orange LED flashes followed by 3 beeps Transmit Memory Data Scan the following barcode to receive data stored in the scanner s internal memory Transmit Memory Data Green Orange LED flashes followed by 3 beeps After data is transmitted to your device it remains on the scanner s internal memory Scan the following barcode to clear the memory if you do not wish to send this data again Clean Memory Data Green Orange LED flashes fol
6. ooth Ot gt iaiia Cellular Of gt Now Discoverable Personal Hotspot Ct gt Carrier Notification Center Control Genter 9 Sane SCAN Scan Bluetooth Profile barcodes After you scan the Bluetooth profile barcodes your scanner will become visible to Bluetooth enabled devices within range HID Profile Al A2 Search for devices Your phone will automatically search for devices Saveo Scan will appear as an external keyboard with a unique identifier number R xxxxXxx Select R xxxxxx to coooUK Bae TSWHED connect lt Settings Bluetooth Select scanner from q Available Devices and DEVICES wait for pairing process to complete Now Discoverable 10 Sone SCAN Devices are now pa a2 0 GENE i ettings BH paired Settings Bluetooth Once Connected is O displayed your device is DEVICES paired to the scanner Faasoa connecten O Your scanner is now New Discoveratia ready to use Please note devices only need to be paired once When they are within Bluetooth range they will automatically attempt to connect to each other If you wish to pair to another device it is recommended you first unpair this device You are now connected Start scanning 11 Sone SCAN Connecting to Android via Bluetooth Switch scanner to Charge Mode Bluetooth Mode Switch to right Charge Mode Scan the Wireless BT Communication barcodes below When Bluetooth is enable
7. rmation contact us at Units 5 6 Ballywaltrin Business Park Boghall Road Bray Co Wicklow Ireland US PH 1 847 448 0412 UK PH 44 208 099 8071 IRE PH 353 1 685 4600 Email info saveoscan com 21
8. the LED will remain red until the scanner has been paired with a Bluetooth device Enable Bluetooth on your device Go to your phone s homescreen and click on the menu button to find Settings then Bluetooth and switch bluetooth on 12 Sane SCAN Scan Bluetooth Profile barcodes After you scan the Bluetooth profile barcodes your scanner will become visible to Bluetooth enabled devices within range HID Profile Al A2 Search for devices Click Search for Devices at the bottom of the screen and Saveo Scan will appear as an external keyboard with a unique identifier number R xxxxxx 13 Sone SCAN Select R xxxxxx to connect Select scanner from Available Devices and wait for pairing process to complete Devices are now paired Once Connected is displayed your device is paired to the scanner Your scan ner is now ready to use Please note devices only need to be paired once When they are within Bluetooth range they will automatically attempt to connect to each other If you wish to pair to another device it is recommended you first unpair this device You are now connected Start scanning 14 Sane SCAN Before connecting the scanner to another device it is recom mended you first unpair from the current device Unpairing using your phone Go to the Bluetooth menu on your phone and select the option menu for scanner fro

Download Pdf Manuals

Related Search

Saveo Scan R11D

Saveo-Scan-R11D

Contents

Download Pdf Manuals

Related Search

Related Contents