User manual for MSRv008
Contents
1. gg CatdReaderFactory com www cardreaderfactory com MAGNETIC STRIPE READERS USER MANUAL MSRv008 BLUETOOTH Terms and conditions Warranty Parts identification MSRv008 installation CRFSuite software installation Software usage MSRv008 signal codes Charging the battery Connections About us 3 4 5 7 9 12 29 29 30 31 MSRv008 MAGNETIC STRIPE READERS E Terms and Conditions General This is a legal agreement between you the user and CardReaderFactory we our us This agreement covers all hardware and software that is distributed with our products for which there is no separate license agreement By opening or breaking the seal of the package using our products installing or downloading the software or using our products and or the software that has been preloaded or is embedded in our products you agree to be bound by the terms of this agreement TO THE MAXIMUM EXTENT PERMITTED BY THE APPLICABLE LAW UNDER NO CIRCUMSTANCES SHALL CARDREADERFACTORY OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY DATA TRANSFERRED TO AND FROM OUR PRODUCTS FOR ITS USAGE FOR ANY LOSS OF DATA OR INCOME ORANY SPECIAL INCIDENTAL CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED You must understand that you and not us is responsible for all data transferred to and from our products and for their usage We are not responsible for anything you do with our products You must not use our products in any way that2. CardReaderFactory is a trading name For company information details please read http www cardreaderfactory com shop terms and conditions html http www cardreaderfactory com shop about us html ETA AA E O ea MSRv008 MAGNETIC STRIPE READERS B PARTS IDENTIFICATION MSRvOO08 Your portable Bluetooth magnetic stripe reader Plastic rail This plastic rail has a 3 track low profile read head which can be used to read up to 1 000 000 cards Rechargable battery 3 7 Volt 40mA Li lon rechargeable battery ETA AA E a Wea MSRv008 MAGNETIC STRIPE READERS USB charging cable This cable charges the battery until it is full charged It will automatically stop when required lt does not work on a time therefore will not damage your battery To use it plug one part of the cable into an USB port from your computer and the othe part into the MSRv008 reader During the charging a led on the cable will turn on to indicate that it is charging the battery and will turn off when the battery is fully charged The LED on the cable will blink if there is any problem when charging i This cable is used to charge the battery of the MSRv008 devices using any USB port This cable cannot be used to connect to the reader using CRFSuite It only charges the battery XK C FE E Bluetooth BLUETOOTH is a trademark owned by Bluetooth SIG inc U S A ETA A E a ea MSRv008 MAGNETIC STRIPE READERS Y MSRvOO8
3. Installation The device can be accessed configured and data can be downloaded wireless via Bluetooth The range of the Bluetooth module of your MSRv008 is up to 100 meters In order for the communication to be possible you need a computer with Bluetooth capabilities or a Bluetooth dongle attached to your computer if it does not have Bluetooth embedded hardware 1 Connect with battery 1 1 Connect your battery with MSRv008 device 1 2 Turn on the micro switch on the PCB You will see the a green light blinking which means it has been turned on 2 Open Bluetooth 2 1 Make sure your receiver is within the range of your Bluetooth reader The data access for MSRv008 Bluetooth is up to 100 meters Your Bluetooth receiver has to have 100 meters range in order to get the information from your reader If the range of your receiver is smaller than 100 meters you will have to adjust the distance accordingly 2 2 Setup Open Control Panel on your Computer AZ Control Panel gt Adjust your computer s settings View by Category System and Security User Accounts and Family i Review your computer s status Safety Back up your computer BH Add or remove user accounts Find and fo problems W Set up parental controls for any user Appearance and Personalization Change the theme Change desktop background Network and Internet i View network status and tasks lt Choose homegroup and sharing options Hardware and Sound Adjust screen
4. This feature allows you to preset your decode setting Click the Tools menu then Settings there will appear a new window of Decode setting as Image 30 shows You can also click the Settings button in the Fields Toolbar on the upper left of the window to go to the setting window see the red rectangle in Image 30 for the Settings button On the Decode Settings there are below features Decoder you can choose either Advanced or Simple mode Advanced mode recommended as it is in grid mode which has more features Simple mode is test mode T AX A ee MSRv008 MAGNETIC STRIPE READERS Display settings you can set the data display here by choosing from the option menu in this area You can set the grouping interval by minutes seconds or miliseconds In the Align by text bar you can input a number which is the number of minimum common chars to align cards The swipe direction can be shown or hiden in the file if you click the check box of Show Direction You can also click Show time to show or hide the time information in the file Time can be shown in date month year hour minute second or other mode according to the option you chose by clicking submenu bar besides the Show time Decoding parameters you can set the decode method by choosing from the options listed here The Decode method includes three options as Show everything including the errors Show only the valid data hide the errors and Show the best g
5. Verify key text bar Verify key 7 cec ok Cancel Click OK button to save your change and exit the O Connected authentification required Change key session Image 22 Change key Click Cancel to discard your change and exit the Change key session If the new key is invalid a popped out window will ask you if you would like to generate a random key ETA AA EE a ea MSRv008 MAGNETIC STRIPE READERS If you agree and press Yes in the dialog window then the CRFSuite will fill in the text boxes with the new randomly generated key and will also write it into clipboard At this point you can open any text editor application notepad word etc and press CTRL V to paste the new key 2 4 View and edit the data i If you have just downloaded a file from the reader once you press the Decode button you will be presented with the window from Image 23 Enter key 32 characters long 0 9 A F Show key Remember key To decode the file you just need to paste or type our a private key into the text box and press Accept Image 23 Enter key If you want to skip this dialog for all future files encrypted with this key you can ask CRF Suite to remember your key by clicking Remember Key Your key will be stored in File Preferences Keys and you can view edit or erase it there Enter Key window will only appear when open a crf file that is encoded with an unknown key A Note Please note that there might be a se
6. a Wea MSRv008 MAGNETIC STRIPE READERS Decode C Users mary Desktop 12 crf Ll x File Edit View Tools yl Direction Y Fields Toolbar ings 4 Resize Columns Decode N Y Quick Settings Toolbar Ay Format 7 bits M Decode Toolbar 41 E Grouping S Filter Status Bar Card Dire Auto resize columns 25 Resize columns now Curt 566647 0000666470000000002 000003 15 31 634004024134566647 000066647000000000 000003 15 32 lt 000003 15 33 634004024134566647 0000666470000000002 000003 15 34 634004024134566647 0000666470000000002 Mm n Image 29 View menu in Decode window Quick Settings Toolbar Shows or hides the quick settings toolbar including DecodeMethod and Format eDecode Method click on the text toolbar choose any command to display the decoded data Options are Show everything including the errors Show only the valid data hide the error and Show the best guess Format shows the format of the decoded data in the file Put mouse pointer on each of the two text toolbars for detailed explanation Decode Toolbar Shows or hides the decoding settings including Grouping interval Align and Filter Grouping interval cards with a time difference smaller than the number shown in this box will be colored in the file eAlign number in the box is the number of minimum common chars to align cards eFilter input in the te
7. only once on any computer you use Without a successful install of the drivers the software will not detect your reader Please click the button Install driverfor USB data cable from the menu Image 6 to successfully install the driver Image 5 Chose your device ETA A b O Wea MSRv008 MAGNETIC STRIPE READERS Step 4 Install the MSR software CRFSuite CRFSuite is the software that accesses configures downloads and decodes the data from your reader Please click the button Install CRFSuite from the CD s User interface If the installer needs to download the NET 2 0 Framework and you do not have an internet connection please refer to Step 2 of this manual If CRFSuite does not start and shows the message The application failed to initialize properly 0xc0000135 it means that you have not installed NET 2 0 Framework and you need to repeat Step 2 To watch a demonstration of CRF Suite please view our video tutorial on How to use by selecting it from your Cd s menu or refer to this manual If for some reason you cannot use the CD ROM drive eg you don t have a CD drive on your computer you can download the software from this web address http www cardreaderfactory com download html CardReaderFactory The software and user guides for your MSRv008 Bluetooth device Install CRFSuite English User Manual zE Y install CRF Suite for Windows mobile Manual in limba Romana il ps Y Install Foxit Reade
8. resolution View devices and printers Change keyboards or other input methods Change display language Connect to a projector Adjust commonly used mobility settings Ease of Access Program Let Windows suggest settings xj Sd Clock Language and Region J2 Uninstall a program Optimize visual display Image 1 Add a device T AX D ee MSRv008 MAGNETIC STRIPE READERS From the Hardware and Sound tab click on the section named Add a device It will pop out a new window showing devices that need installation Select a device to add to this computer Windows will continue to look for new devices and display them here Image 2 Add device MSRv008 If you can see an icon like the one you see above in Image 2 your MSRv008 reader can be synchronized with your computer Click to select the MSRv008 Build xxxxxx icon Then click Next to get a window like the one in Image 3 Here you are asked to input the pairing code for the MSRv008 The default pairing code is 0000 Input the code 0000 and click Next Next window should tell that your device is ready to use If you cannot see an icon like the one in Image 2 please make sure that both your MSRv008 and the Bluetooth on your computer are turned on G Uf Add a device Enter the pairing code for the device This will verify that you are connecting to the correct device a l 0009 ee The code is either displayed o
9. tabs Settings Keys and OEM which are explained below Settings image 13 allows you to associate CRFSuite software with crf file format Once associated you can double click on any file with crf extension and CRFSuite will automatically open the file for you Here you can also enable or disable the pop up dialogs which ask you ifyou want to change the 1234 login password ifyou want to open the file immediately after the download ETA AA Ci a Wea MSRv008 MAGNETIC STRIPE READERS Keys Image 17 You can edit stored encryption keys by ticking the check box of Edit keys Your key will be stored here after you tick the check box of Remember Key in pop up window labeled Enter Key when you decode data or open a crf file this isalso discussed in Decode the data part Now you can edit or erase your keys in the text box Click Apply to save your changes Click Cancel to discard changes and exit the preferences Click OK to confirm changes and exit al Sci OEM Image 18 If you point your mouse over the TZ cnmameenence Check box and label Remove OEM features a mn pde eterno menes Warning message will pop up Please read it carefully hy orders deine cresut miernie before you decide to remove the OEM features of your choice A Ticking check box labeled Remove OEM features ponent a will allow you to rename the CRFSuite witha new title of your choice Click Apply to sav
10. will or is likely to breach any law You must not use our products for any fraudulent purposes or in connection with a criminal offence or other unlawful activity You must not use our products to obtain any information without the owner s knowledge or approval You must not send use or reuse any material that is illegal offensive abusive indecent defamatory obscene or menacing or in breach of copyright trademark confidence privacy or any other right or is otherwise injurious to third parties or objectionable or which consists of or contains software viruses political campaigning commercial solicitation chain letters mass mailings or any spam You and your applications of our products must not cause annoyance inconvenience or needless anxiety You will safeguard the use and distribution of our products and make any effort to prevent illegal use from occurring This license is effective until terminated It will terminate upon the conditions set forth above or if you fail to comply with any of its terms Upon termination you agree that the Hardware Software and accompanying materials and all copies thereof will be destroyed This agreement is governed by the laws of United Kingdom People s Republic of China Hong Kong and British Virgin Islands Each provision of this agreement is severable If a provision is found to be unenforceable this finding does not affect the enforceability of the remaining provisions terms or condit
11. 4 Firmware 7 0 Build 440624 Firmware 7 0 State Ok State Ok Clock 12 31 1969 4 16 01 PM Clock 12 31 1969 4 26 02 PM Swipes 5 in memory 367 in life time Swipes 38 in memory 58 in life time Memory 2 048K Used 1K Free 2 046K Memory 2 048K Used 3K Free 2 044K Change Date amp Time Change login password Enter password 02 01 40 09 Oct 2011 E E Show pass Ok O Port COM4 opened Clock not changed Image 13 Change Clock Image 14 Change password e Sync will synchronise the device clock with the computer s clock All the values in the additional fields are ignored e Ok will synchronise the clock with the values specified in the fields above e Cancel the clock on the device will be left unchanged and you will be returned to the Step 2 Password This option changes the password for your device Image 14 This is the one that you are asked in step 1 Warning If you forget the new password you will not be able to access the device any more and we won t be able to help you e QOk will change the password with the one requested e Cancel will not change the password and you will be returned to Step 2 e Show pass will show the password you entered for you to view ETA A AE O ea 2 2 2 Menus and its features On the Menu Bar of the CRFSuite window there are three menus File Device and Help MAGNETIC STRIPE READERS File it will get you a drop down list Image 15 with fol
12. ad them by inserting the CD into your CD ROM drive If you do not agree please return the reader with all its accessories to us for a full refund 2 CardReaderFactory Suite Terms and Conditions Terms and Conditions License and Usage Agreement This is a lega agreement between you the user and Bbyte Hong Kong Corporation Ltd CardReaderfactory we our us This agreement covers all hardware and software that ts distributed E with our products for which there is no separate license agreement Genera By opening or breaking the seal of the package using our products installing or downloading the software or using our products and or the softwere that has been preloaded or is embedded in our products you agree to be bound by the terms of this agreement TO THE MAXIMUM EXTENT PERMITTED BY THE APPLICABLE LAW UNDER NO CIRCUMSTANCES SHALL CARDREADERFACTORY OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY DATA TRANSFERRED TO AND FROM OUR PRODUCTS FOR ITS USAGE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL INCIDENTAL CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED You must understand that you and not us is responsible for all data transferred to and from our products and for their usage We are not responsible for anything you do with our products You must mot use our products in any wey that will or is likely to breach any law You must not use our products for any fraudulent purposes or in connection with a criminal offense or o
13. anufacturing and delivering quality products which exceed customer and regulatory requirements CardReaderFactory is a trading name Please consult www cardreaderfactory com for company information details Contact details sales cardreaderfactory com support cardreaderfactory com http www cardreaderfactory com MD RSE MSRv010 MSRv009 MSRv007 Note all sizes are in millimeters mm Visit our website for more details y ETA AA E O Wea sales cardreaderfactory com www cardreaderfactory com
14. curity risk if someone else can get access to your computer There is also a check box of CBC in the Change key area Note the CBC check box It tells the reader that it can use the CBC cipher block chaining encryption mode which is stronger than the old encryption mode If you choose to use this mode you will only be able to read the data with CRF Suite 3 1 or higher ETA A E a Wea MSRv008 MAGNETIC STRIPE READERS 2 4 1 Opena CRF file In the upper menu select File and then Open Anew window will open which will allow you to select the crf file that you want to decode After you ve selected the file you will be asked for the decrypt key the same window shown in the previous paragraph All the files downloaded from the MSRv008 crf are encrypted The contents of these files cannot be accessed without a key therefore you will be asked for one each time you want to open these files The key is 32 characters long and contains only numbers and letters from a to f The software does not make any difference between upper case e g A and lower case e g a 2 4 2 View the data If the key is OK the program will decrypt the data and display it in the text box in the window as Image 24 shows From now on you can edit the file and arrange the data as you see fit As you can see from the window the text box is generally divided into two sections The upper half area shows the most reliable decrypted data according to the s
15. e Inserts the contents of the clipboard at the location of the cursor and replaces any selected text Delete Removes the selection Find Searches and highlights the data you want in the file Input the data that you want to search in the text bar and click the Find Next button Image 28 then the data you want to search will be highlighted in the file Click the Find Next button then the next occurrence will be highlighted Image 28 Find function You can keep pressing the Find Next button until the search has reached to the end of document You will be informed by a dialog window when you have reached the end If the data you want to search does not exist in the document a window will appear to warn you You can set the Find direction as Up or Down by clicking either of them To match case when searching click the Match case box Click Cancel to exit Find command and setting Find next click this item on the Edit menu after you set your Find then the data you want can be highlighted and shown in the window The shortcut for this function is F3 key as you can see in the menu I A ED ee ea MSRv008 MAGNETIC STRIPE READERS Select All click this item on the Edit menu all the data in your document will be selected Selecting data is useful to perform actions like cut copy paste delete which are also available from the Edit menu EditMode This menu has a submenu which includes 3 modes Edit on E
16. e the changes Click OK to save changes and exit Click Cancel to discard changes and exit Device will get a drop down list with Sub Menus as shown in Image 19 File Device Help Devici Refresh info Ctrl R Mame e Refresh info Click this Sub Menu to State Old mode refresh the info in Device Info box You can Clock also refresh the Device Info box by clicking anywhere inside the Main Window If none of the parameters change it is because the information about your reader is unchanged however with each refresh the device clock parameter should be updated Swipe Firmware update from file Ctrl F Firmware update from internet Clock Password Bluetooth boa o Connected authentification required Image 19 Device menu T AX A ee MSRv008 MAGNETIC STRIPE READERS New mode and Old mode Since build number 6xxx our MSR device have 2 read modes e The old mode was used in all readers with build numbers below 6000 e The new mode is the default read mode in all readers with the build number above 6xxx Difference between the two modes e The new mode can read 704 bits while the old mode was able to read 608 bits As both specifications are above the magnetic cards standard the advantage is noticeable only if you are using a customized card format e The new mode allows us to check if there is something wrong with the head NOTE If
17. ettings and decoding of our Decode program If you click or go to any cell of any Track column you will see in the lower half area of the window all the variants of that decrypted data as well as the swipe direction and reliable rate relates to it You can review all the variants and choose the one that you think most fit by clicking or going to that cell of variant This will change the data in the Track field To save the changes you made click File then click Save or Save as Decode D temp new doc crf File Edit View Tools yl Direction Time Tracki Track2 Tracks G2 Settings amp Resize Columns Decode Method Show the best guess Ay Format 7 bits wp 20 7 Grouping interval 2000 M Align 4 So Filter Time Track 1 Track2 Track3 000003 15 9 000003 15 63400402413456664 6340040241345666 6340040241345 000003 15 31 63400402413456664 6340040241345666 6340040241345 000003 15 32 3400402413456664 6340040241345666 6340040241345 000003 33 63400402413456664 6340040241345666 6340040241345 000003 15 34 634004024134566647 6340040241345666 6340040241345 m p EEEE R UETIT USTTT45D5E 5 5DT1 830000000047 38 cards in document Image 24 Decode data ETA G E a Wea MSRv008 MAGNETIC STRIPE READERS 2 4 3 Saving the data CRFSuite can save CRF Text files and CSV files Decode CU A text file is the human readable information and is Edit View NOT enc
18. ill not damage your battery ETA A E a ea MSRv008 MAGNETIC STRIPE READERS Note e While charging the MSRv008 cannot be used to read any cards e This cable cannot be used to connect to the reader using CRF Suite You can also use any other 3 7V Li lon charger to charge the battery Do not charge your battery at more than 4 2volts because it will blow up or catch fire The red wire is plus and the black wire is minus Connections The MSRv008 is static sensitive therefore you need to handle it in a static free environment This means that you need to wear at least an antistatic bracelet when you touch the electronics If you do not wear static protection gear you risk damaging the electrostatic circuit The reader requires at least 2 8Volts to work correctly and a maximum of 3 8volts Please read the card reader s datasheet for complete information The wire connections to the battery and the head are shown in Image 32 24 00 a e F Head Commomn t Track 1 Track 2 Track 3 t o Head Case GN D i 3ND cC vech Image 32 MSRv008 and Read Head Connections T G E aa Wea MSRv008 MAGNETIC STRIPE READERS E Our mission is to understand and assess the needs of our customers and prospective customers and provide creative responsive timely and cost effective products by drawing upon our extensive experience and resources CardReaderFactory is committed to designing m
19. ions of this agreement This agreement is binding on successors and assigns You agree and we agree to waive to the maximum extent permitted by law any right to a jury trial with respect to any dispute and all disputes will be resolved through binding arbitration Because this waiver may not be effective in some jurisdictions this waiver may not apply to you You acknowledge that you have read this agreement that you understand it that you agree to be bound by its terms and that this is the complete and exclusive statement of the agreement between you and us regarding the Hardware and Software ENTE G E a MSRv008 MAGNETIC STRIPE READERS E Terms and Conditions Warranty We warrant that all of our products are free from defects in material and workmanship under normal use and service for a period of sixty 60 days for OEM products and one 1 year for all other products unless otherwise stated This period is counted from the date of the shipment Our option any device returned for warranty work and found to be defective by us To repair the device under warranty the customer has to complete this form first http www cardreaderfactory com shop repairs html We will then e mail an RMA number the shipping address and instructions The product will then have to be returned by the customer to the specified address to our factory or facility We will without charge repair or replace at our option any product returned for warranty w
20. lowing Sub Menus CRFSuite foc mes File Device Help Open Device Manager Install CRFSuite to flash drive Ctrl I Preferences Ctrl P Alt X Exit Ctrl O PO ee ee Image 15 File menu e Preferences oa Settings Keys OEM Windows integration Deassociate from CRF files User interface CRFSute is currently associated with CRF files Check association on startup V Ask to change insecure passwords Automatically open downloaded files Ok Cancel Apply Image 16 Preferences Preferences je Settings Keys OEM Edit keys 1 key stored Erase all Ok Cancel Apply Image 17 Edit keys Open will let you choose and open txt and crf files Device Manager You can use Device Manager to view alist with present hardware devices on your computer and set properties for each device Install CRF Suite to flash drive You can browse and select a folder or a removable drive where you want CRFSuite to be installed This feature will not install CRFSuite on your computer You will have to run the program by clicking on the exe file from the folder where you choose to install CRF Suite with this option Preferences Will pop up the Preferences window This allows you to configure the behaviour of CRFSuite Exit Closes CRFSuite and any crf files open The Preferences pop window has 3
21. n your device or in the information that ERE came with the device MSRv008 Build 730608 What if I can t find the device pairing code Image 3 Enter pairing code ETA A E a Wea MSRv008 MAGNETIC STRIPE READERS CRFSuite Installation 1 Install the drivers and software The software for MSRvXXX has been designed and tested on Windows XP and Windows 7 32 and 64bit We do not guarantee or support its usage on any other operating system Insert the CD into your CD Rom NOTE On each Windows computer the CD ROM has attributed a letter In this T Manual we will use as example E as the CD ROM drive letter gt Mt might vary on each computer You can find out the letter of your CDROM by clicking on My Computer icon A window with our Terms and conditions should automatically pop out If your computer does not show this window double click on E your CD ROM drive Read our Terms and conditions carefully After accepting our Terms and conditions the interface will guide you through the installation process offering drivers user manuals for all our products and useful video tutorials about how to use and samples Here we present you the steps Step 1 Terms and conditions By using our software and hardware you agree to be bound by our Terms and conditions which you can read at the beginning of this manual Please make sure that you have read and agreed with them You can also re
22. nter Edit on F2 and Text Edit These options will change the behaviour of the editor and you should choose the behaviour that you find it easier to work with Edit on Enter in order to edit a cell you will need to press Enter You will be able to navigate the cells with the arrow keys from your keyboard Edit on F2 in order to edit a cell you will need to press F2 You will be able to navigate the cells with the arrow keys from your keyboard Text Edit this will make the editor disregard the cells and behave like a normal text editor You will be able to navigate with a cursor through all the characters 2 4 4 1 View setting and toolbar Click View in the upper window you can go to the View menu as shown in Image 29 This menu contains commands for controlling the on screen display of the document Fields Toolbar Shows or hides the field toolbars including Direction Time Track1 Track2 Track3 Settings and Resize Columns eDirection shows or hides the Direction information in the document Time shows or hides the Time information in the document eTrack1 shows or hides the Track1 information in the document eTrack2 shows or hides the Track2 information in the document eTrack3 shows or hides the Track3 information in the document Settings shows a window for you to do the format setting for your file Resize Columns goes back to the original column size of your file EO A EE
23. of swipes in memory the number of swipes in device s life time and the memory used available You can also read more information from each field by holding your mouse pointer over this field for a few seconds The State field should be always OK If it isn t there s a fault with your device CRFSuite will display instead of OK a short description of the fault To refresh the data from this box clicking anywhere inside it Download downloads the data from the device You will be prompted to choose the name of the file All the files downloaded from the MSRv008 are in CRF format which is encrypted Erase erases the content of the device During the erase the device s led will blink from time to time which indicates that it is erasing the memory Warning Once this button is pressed the data will be permanently erased and there will be no way to recover it from your device Decode opens the decode window which allows you to see modify print and save the downloaded data If you have not downloaded anything from MSRv008 it will ask for the file that you want to decode We will discuss this window into next chapter Reboot will reinitialize your device as if the power was cut Normally you will not use this feature Please note that this feature is disabled for demo devices ETA A Ck ee Wea MSRv008 MAGNETIC STRIPE READERS Log Out It logs you out from the device If you do not log out the next time you o
24. om your MSRv008 is encrypted with a military grade encryption Rijndael 128 In order to decrypt the file you need to have a key which is unique for each reader We never ship the key together with the reader You need to confirm us that you have received the reader and we will send you the key In order to obtain the key you need to write an email to support cardreaderfactory com and ask us for the key You need to include into your email the build number of your device This number is displayed in the Device Info box please observe the red rectangle from Image 21 We will only send the key to the email that has been used to place the order so we can make sure that nobody else can obtain your own private key from us Please take good care of your key We will never disclose your key to anybody else unless the law requires us i to To protect your privacy please change your key Along with the upgrade key we emailed to you CRFSuite there is also the master password in 4 numbers we provided File Device Device Info Mama Coiiamiir This is the second password besides the default Build 440624 Firmware 7 0 State Ok Press the Key button you will get a window as Clock 12 31 1969 8 05 56 PM a 5 in memory 367 in le time Image 22 Then you can change your key in the Memory 2 048K Used 1K Free 2 046K Change key box by entering your new key in the Change key Enter key text bar and enter the new key again in eS the
25. ork and found to be defective by us If we will find that the returned product is defective and falls within the terms of this warranty we will ship free of charge the product back to the customer with a postal or courier service at our own discretion We will also credit to the customer s account with us the amount he she paid for shipping but not exceeding 50USD This credit can only be used for paying other orders with us and has no other cash value This warranty will not apply to any of our products which should have been e Repaired or altered except by us Tampered with or the seal case has been broken if applicable e Poured onto glue or any other kind of liquids substances e Subjected to misuse negligence or accident In no case shall our liability exceed the purchase price The mentioned provisions do not extend the original warranty period of any product which either been repaired or replaced by us The user is solely responsible for determining if the product is usable in his or her application We will not cover under any circumstances any customs or customs processing charges Any such charges will be billed to the customer If a product has been returned for warranty repair and it is found to be in working order we will charge a revision fee usually 80 USD unless otherwise stated and the shipping fees to return it back to the customer in this case we will not cover the customer s shipping fees Our details
26. r pdf CRF Suite demonstration a NET Install Net Framework 32Bit 64bit Cleanup How to use CRFSuite a lt lt Back Browse CD CRFESUITE HIN Software and documentation SD cardreaderfactory com Image 6 Install your software ETA AA Ci a ea MAGNETIC STRIPE READERS p MITTERE 2 Using the software The software used to download edit and view the data read with the MSRv008 is called CRFSuite 2 1 Step 1 Connect to the MSRv008 CRFSuite File Device Help Step 1 Connect USB Bluetooth All ports C All ports f everything else fails Standard Serial over Bluetooth link CO w Ay 2 ports detected Image 7 CRFSuite startup amp CRFSuite File Device Help Step 1 Connect USB 9 Bluetooth All ports O All ports f everything else fails Standard Serial over Bluetooth link CO w Password eeee Log In O Port COM10 opened Image 8 Connect and Log In CRFSuite is designed to work with all our card readers therefore it has more options than MSRv008 needs Please open CRFSuite You should see a window as the one in Image 7 As your reader is connected through Bluetooth please select the Bluetooth radio button After selecting the Bluetooth radio button CRFSuite will detect your MSRv008 It will be displayed in the combo box below the radio buttons There should be two entries in the list Select the first entry If you can not find any entry p
27. r someone else who connects to the device will not be asked for authentication For this reason we strongly recommend that you log out or close CRFSuite before disconnecting the device from the computer Upgrade This button is only displayed for demo versions and enables full functionality of your device In order to upgrade your device you need to purchase from us an upgrade password This password you will have to paste CTRL V or type in the password boxes displayed after clicking on Upgrade button Once the upgrading is done this button will disappear and the name of the device will change from Demo Card Reader into Card Reader Please do not try random passwords as you will block the device and you will be unable to use the device at all for a limited period of time All blocked devices will display at any connection _ attempt a warning windows letting the user know for how long the device will remain in this state File Device Help Device lgfo Name bee Cac Feat Card Reader Build 0608 Firmware 0 A State Ok Clock 01 01 1970 08 11 03 Swipes Oin memory 0 in life time Upgrade and change key After log in a window will pop up showing that your device is a Demo Card Memory 4 224K Used OK Free 4 224K Reader Image 11 To upgrade your demo device to full Step2 Command the device functionality you need to purchase the upgrade key from Download Erase Decode U
28. ress Rescan and check again After selecting the first entry in combo box press Connect and you will receive the message Connected authentification required At this point CRFSuite has connected to the MSRv008 and will ask for a password The default one is 1234 You will be able to change it later Type in the password and press Log In Image 8 If you ve logged in successfully a window will pop up asking if you want to change the default password ETA A Ce a Wea 2 2 Device Info box e CRFSuite File Device Help Device Info Name Card Reader Build 730608 Firmware 7 0 State Ok Clock 01 01 1970 08 06 14 Swipes Oin memory 0 in life time Memory 4 224K Used OK Free 4 224K Step2 Command the device Download Erase Decode O Connected authentification required Image 9 Device Info box 2 2 1 Commands CRFSuite File Device Help Device Info Name Card Reader Build 730608 Firmware 7 0 State Ok Clock 01 01 1970 08 06 14 Swipes Din memory 0 in life time Memory 4 224K Used OK Free 4 224K Step2 Command the device Download Erase Decode u Clock Password Bluetooth O Connected authentification required Image 10 Commands box MAGNETIC STRIPE READERS On the upper area of the window there is the Device Info box In here you can see the status of your device The information displayed includes the date and time of the device the number
29. rypted Open Ctrl O Save Ctrl S Tools The data shown into the text file is the best guessed variant by our software All other variants are not saved therefore they are lost Export as new file bd Export as new file csv Export as Text 263 A CSV file is comma separated values which can Export as CSV 863 Exit be imported by spreadsheet software such as Excel or Open Office A CRF file is generated by CRF Suite which contains the decrypted data of the cards A CRF file can only be opened by CRFSuite software 000003 15 33 863 5 000003 15 34 63 6 000003 15 37 63 Image 25 File menu in Decode window To save after you edited and arranged the CRF file select File and then Save to the file you opened or Save as to a new named CRF file as Image 25 shows You can also save the data in the file you opened and edited in other types of files as text document txt and csv shown in spreadsheet program by selecting File and then Export as txtor csv like Image 25 shows Export text file 2 _ 2 O The file has been saved successfully Do you want to open the saved file Warning Do not use the text files as CRF replacement Warning Do not use this file as CRF replacement The text files do not contain important informations A rpm variants encoding colors etc If you still need this variants encoding colors etc If you still need
30. s You can purchase itfrom this link Clock Password Bluetooth http www cardreaderfactory com shop upgrade Logout codes html WARNING This is a demo device Image 11 Upgrade Once you received the upgrade password you can proceed upgrading by clicking the Upgrade button at amp CRFSuite the bottom of the window Image 11 File Device Help Device Info Type in or paste the upgrade key password an aeaa 70 received via e mail in the text bar and click OK and He i then Yes to finish the upgrading Clock 01 01 1970 08 01 23 Swipes Din memory 0 in life time sm ch aaa At this point you can see from the CRFSuite window that the Name of your device is changed to Card Reader and the Upgrade button is no longer present and message Upgrading succeeded will be seen at the bottom of the window Step2 Command the device Download Erase JI Decode Clock Password Bluetooth Reboot Key Jf LogOut O Upgrading succeeded Image 12 Key button ETT A A a Wea MSRv008 MAGNETIC STRIPE READERS Clock When you power on the device it starts from 00 00 00 1 1 1970 GMT You can synchronize the device date and time with your local time zone by pressing this button You will be prompted witha text box like in Image 13 CRFSuite CRFSuite File Device File Device Help Device Info Device Info Name Card Reader Name Card Reader Build 44062
31. s for Decode program Ctrl O open a crf file Ctrl V paste Ctrl S save a crf file Del delete Ctrl Z undo Ctrl F find query Ctrl Y redo F3 find next Ctrl X cut Ctri A select all Ctrl C copy Ctrl E resize columns Y NSERIES MSRv008 shows light signals as a feedback for the user Please find below the list with the meanings for these signals Normal operation Start Up Blue LED only blinks twice rapidly 2x 25ms Read Card OK Blue LED blinks once for 25 ms Erasing Memory Red LED turns on and off for an average of 1 5seconds intervals Errors Card Read but not stored Blue LED signals 5 times for 25ms this signal is shown only by the demo version Other failures on start up the Red LED will blink few times not as normal The error will be displayed by CRFSuite through a warning message as you log in It will also be shown into the Status field D Charging the battery The reader is shipped with a rechargeable Li lon battery When the battery runs out it needs to be charged We ship our card reader with a USB charging cable which you can connectto any powered USB port The USB connector of charging cable is plugged into a powered USB port and the Micro USB connector of the charging cable it will be plugged into your MSRvXXX with the battery connected to it The cable charges the battery until it is fully charged and automatically stops Charging time it is not controlled by timer therefore the charger w
32. ther unlawful activity You must not use our products to read any information without the owner s knowledge or Cae www Carcreagertactory com Image 4 Terms and conditions EO A EE O ee MAGNETIC STRIPE READERS Step 2 optional Windows setup a Some documents might require your computer to be able to display PDF files If your computer is not able to display them please install Foxit Reader from our cd You can install it by clicking the Install Fox Reader button b If you are running Windows XP and Vista you might need to install NET 2 0 framework If it isn t already installed CRFSuiteSetup will try to download it from the internet You can skip the download by installing the NET framework from our CD Please click on Install NET Framework and chose the version for your PC 32 bit or 64 bit NET Framework 2 0 SP2 for x86 machines for 32 bits system installation NET Framework 2 0 SP2 for x64 machines for 64 bits system installation If the installation fails you will need to cleanup your computer of the failed NET 2 0 Framework using the software downloaded by clicking the button clean up Only after your computer has been cleaned you can attempt to reinstall the NET Framework Step 3 Drivers installation You have to install the driver for USB cable in order to access your reader Select your device from our user friendly interface It will guide you through the installation process You need to do this
33. this ian aid e information please make sure that you also save the document in CRF format A Hide details Yes No Image 26 Warning for text files Above warning information will also appear in a dialog window when you successfully exported your data into text files as shown in Image 26 And you can see the detailed explanation of the warning by clicking the Show details icon on the pop out Export text file window T G 20 a Wea MSRv008 MAGNETIC STRIPE READERS 2 4 4 Edit the data Decode C Users mary Desktop 12 crf View Tools Undo Ctrl Z G3 Settings 4 Resize Columns Redo Ctrl Y Ay Format 7 bits Cut Ctrl X Align 4 S Filter Copy Ctrl C Ba Paste Ctrl V Delete Del 634004024134566647 0000666470000000002 Find Ctrl F 634004024134566647 000066647000000000 Find Next F3 E Select All Ctri A 634004024134566647 000066647000000000 EditMode 634004024134566647 0000666470000000002 Direction Variant Image 27 Edit menu in Decode window You can use the Edit menu in the upper Decode program window Image 27 to edit and arrange your data by clicking the Edit and the items on the menu Undo Reverses the last command or the last entry you input Redo Reverses the action of the last Undo command Cut Removes and copies the selection to the clipboard Copy Copies the selection to the clipboard T D ee MSRv008 MAGNETIC STRIPE READERS Past
34. uess You can choose one mode you see fit We recommend you to choose Show the best guess and the next feature Use smart decoding Click in the box before Track1 will enable the window to shows or hides that track Same with Track 2 and Track 3 The data shown in each track is decided by the standard you choose at the bottom of this area You can choose from ISO 7811 IATA ABA THRIFT to Custom format For the BPC and Start information for each track please refer back to Format on Quick Settings Toolbar Click the box at the bottom to show or not show this window when opening a file Click OK to save your settings and exit Click Cancel to discard your last settings and exit Decode Settings ec wat Decoder 3 Settings Ao Advanced Gnd Mode more features wd gt dy Simple Text Mode SY Filter Display settings Grouping rterval 2 seconds Align by 4 common characters 04024134566647 0000 FF Show direction 04024134566647 000A 19 Showtme hhhhhhamas Decoding parameters Decode method Show the best guess A J Use smat decoding J Track 1 BPC 7 Sat 020 36 cards 34 J Track2 BPC 5S Sat 030 37 cards 97 J Track 3 BPC S Rat 030 35 cards 32 ISO 7811 IATA ABA THRIFT Sd Y Show this window when opening a fle Image 31 Decode setting ENTE G E a Wea MSRv008 MAGNETIC STRIPE READERS 2 4 4 3 Shortcut and function key
35. xt toolbar the data you want to search then entries contain in the text will be shown ETT A E a ea MSRv008 MAGNETIC STRIPE READERS 2 4 4 2 Tools Image 30 shows the Tools menu in the window There are three functions on this menu as below Delete empty card this command key enables you to remove empty card data from you file Asmall window will appear when you click this item on the menu The popped out window asks you to input a number to perform your command Cards with all tracks with a number of characters equal or less than the number you input will be considered as empty After input the number the window will show you the numbers of cards found Click Accept found cards will be deleted Click Cancel you will exit from this command Decode D temp new doc crf File Edit View Tools Delete empty cards Decode Method show key ings Resize Columns Ag Format 7t dh Filter mia Settings Card Direction Time Track 1 Track g l 000003 15 239 z 3 1 Py 000003 15 29 563400402413456664 634004024134 7 ms ooooos 15 31 634001402413456664 634004024134 3 000003 15 32 63400402413456 664 634004024134 s gon003 15 33 63400402413456664 634004024134 Image 30 Tools menu in Decode window Show key click this item a window will show you your current key information for decoding Meanwhile your key information has been copied on the clipboard Settings
36. your device works correctly in the new mode it will also work perfectly in the old mode In order to switch from one read mode to another you just need to click on New mode or Old mode Firmware update You can check your firmware version in the Device Info box By clicking Firmware update from file you will be asked to select an aes file extension format If you click Firmware update from internet the software will connect to our server using an Internet connection and update your firmware automatically Help This menu and its Sub Menus Image 17 allows you to access help files and tutorials report a bug check for CRFSuite updates and check your current software version by clicking About CRFSuite Se e CRFSuite File Device Help File Device Device Info View Help Device Info Name Card Re ia Name _ Card Reader Build 730608 ae Build 730608 Fimware 7 0 State Ok Check for updates State Ok Clock 01 01 1 Clock 01 01 1970 08 06 14 Swipes Oin men About Swipes Oin memory 0 in life time Memory 4 224K osewu Z Memory 4 224K Used OK Free 4 224K Step2 Command the device Step2 Command the device Cock Password Bluetooth Clock Password Bluetooth fi Connected authentification required O Connected authentification required Image 20 Help menu Image 21 Build number z ETA G D a Wea MSRv008 MAGNETIC STRIPE READERS 2 3 Obtain your decryption key The data downloaded fr
Download Pdf Manuals
Related Search