www.delock.de Product
Contents
1. unplug the power cord Open the housing Remove the slot holder from the available PCI slot and the rear slot for the 2 serial ports Before you can insert the card into the PCI slot please connect the 2 ports of the serial rear bracket to the PCI card Follow this instructions Insert the card straight and carefully into the free PCI slot until it is well seated Usea screw to attach the card to the housing Fixthe rear bracket with a screw also on the housing Reattach the housing and connect the power cord to the AC adapter assistant will appear Choose the option No not this time and click Continue Put the driver CD in the CD ROM drive choose Install software automatically and click Continue Choose the driver nm9835s and click Continue When driver is located click Continue installation Click Finish Install parallel interface 6 The hardware assistant appears with a newly found parallel interface Choose No not this time and click Continue 7 Choose Install software automatically and click Continue 8 Click Continue installation 9 Click Finish Install serial interface 10 The hardware assistant appears with a newly found serial interface Choose No not this time and click Continue 11 Choose Install software automatically and click Continue 12 Click Continue installation 13 Click Finish 14 When the second serial port is found r2. PrE SNZ we move the world D User manual PCI card 2 x Serial 1 x Parallel Product No 89004 User manual No 89004 a CE Fe A www delock de Description The DeLock PCI Card expands your PC by two external serial ports also one external parallel port You can connect devices like scanner printer mouse etc to the card Specification Serial Interface e Compatible with 16C550 UART e FIFO 16 byte e Data transfer rate up to 1 Mbps e 2 xPin header with rear bracket with two DB9 Parallel Interface SPP PS2 EPP ECP compatible IEEE 1284 e FIFO 16 byte e Datatransferrateupto1 5 Mbps e 1x DB25 parallel port e Plug amp Play e Automatically selects IRQ and I O e Supports PCI IQR sharing e 32 Bit PCl standard 2 1 System requirements e PCwith one free PCI Slot and one rear slot e Windows 98SE ME 2000 NT4 0 XP Linux DOS Package content PCl card rear bracket e Driver CD e User manual Make sure that product package contains all items before operation If any item is missing or damaged then please contact your dealer immediately 23 Hardware Installation Note Follow the general instructions for installation of the card If necessary read the manual of your computer or ask a specialist for help N Driver Installation Windows XP Service Pack 2 Controller installation After installing the hardware and starting your computer the hardware 1 Turn off your PC and
3. e device is ready for use 5 AN Support Delock Ifyou have further questions please contact our customer support support delock de www delock de or phone 0700 DELOCKGE 0700 335 625 43 You can contact our service hotline during the following times Mon Fri 9 00 17 30 pm charge 0 12 min All callers outside of Germany dail please 00493081789324 A connection fee applies according to fee schedule of Deutsche Telekom AG or your local telephone provider You can find current product information on our homepage www delock de Final clause Information and data contained in this manual are subject to change without noticein advance Errors and misprints excepted Copyright No part of this user s manual may be reproduced or transmitted for any purpose regardless in which way or by which means electronically or mechanically without explicit written approval of Delock Edition 11 05 6
4. epeat steps 1 4 Your PCI card is installed and ready for use Windows 2000 XP Service Pack 1 Controller installation 1 After installing the hardware and starting your computer the hardware assistant appears 2 Put the driver CD in the CD ROM drive choose the driver nm9835s and click Continue 3 When driver is located click Continue installation 4 Click Finish Install parallel interface 5 The hardware assistant appears with a newly found parallel interface Choose Install software automatically and click Continue 6 Click Continue installation 7 Click Finish 4 Install serial interface 8 The hardware assistant appears with a newly found serial interface Choose Install software automatically and click Continue 9 Click Continue installation 10 Click Finish 11 When the second serial port is found repeat steps 1 4 Your PCI card is installed and ready for use Windows 98 98SE ME Controllerinstallation 1 After installing the hardware and starting your computer the hardware assistant appears 2 Put the driver CD in the CD ROM drive and click Continue 3 Choose the option Search for best driver and click Continue 4 Choose the option CD ROM drive and choose the path CD ROM drive NetMos nm9835s Win98 click OK then Continue 5 Click Continue The driver is being installed 6 Click Finish 7 Your PC must be restarted now click Yes 8 After rebooting th
Download Pdf Manuals
Related Search