USER MANUAL OF TEMPERATURE SENSOR
Contents
1. 00mm marker shiftable pipe joint with thread M8x1 KKK Not complying with the rules may lead to decreasing the precision and a shorter life of the sensor Wrong mounting and using of the sensor makes the warranty void2. WAS Zak ad elektroniczny TATAREK Jerzy Tatarek USER MANUAL OF TEMPERATURE SENSOR THERMOCOUPLE TYPE K 20 40300088 0150 The temperature sensor is designed for measuring the temperature of flue gas The theoretical range of temperatures 0 1200 C The usable temperature max 1000 C limited by Your controller The precision class acc to DIN EN 60584 2 You have to comply with the following rules While mounting 1 The marker should unconditionally be placed outside the installation that is outside the mounting place 2 The cable shouldn t be run close to the hot wall of the flue pipe chimney should be run as far away from any heat source as possible the cable has a temperature resistance of up to 400 C 3 Unconditionally you have to avoid mounting in areas of possible influences of the flame the sensor mustn t be mounted close to the flue gas output of a chimney or a stove Otherwise it may lead to a premature failure of the sensor While using You have to be very careful while cleaning up the chimney pipe and such in order to not cause a mechanical damage of the sensor Its very recommended that the sensor should operate in a straight position although in special cases you can bend the measuring part or behind the marker You have to avoid bending at extreme angles 100mm _ sC 3000mm 50mm marker shiftable pipe joint with thread M8x1 KKK Not complying with the rules may lead to dec
3. reasing the precision and a shorter life of the sensor Wrong mounting and using of the sensor makes the warranty void WAS Zak ad elektroniczny TATAREK Jerzy Tatarek USER MANUAL OF TEMPERATURE SENSOR THERMOCOUPLE TYPE K 20 40300088 0150 The temperature sensor is designed for measuring the temperature of flue gas The theoretical range of temperatures 0 1200 C The usable temperature max 1000 C limited by Your controller The precision class acc to DIN EN 60584 2 You have to comply with the following rules While mounting 1 The marker should unconditionally be placed outside the installation that is outside the mounting place 2 The cable shouldn t be run close to the hot wall of the flue pipe chimney should be run as far away from any heat source as possible the cable has a temperature resistance of up to 400 C 3 Unconditionally you have to avoid mounting in areas of possible influences of the flame the sensor mustn t be mounted close to the flue gas output of a chimney or a stove Otherwise it may lead to a premature failure of the sensor While using You have to be very careful while cleaning up the chimney pipe and such in order to not cause a mechanical damage of the sensor It s very recommended that the sensor should operate in a straight position although in special cases you can bend the measuring part or behind the marker You have to avoid bending at extreme angles 100mm_ 20mm 30
Download Pdf Manuals
Related Search