Vista 6150 ICON Keypad
Contents
1. RF Zone Number If assigning a button transmitter this prompt will appear Enter the button s zone number see your installer for zone number FC Out of Range This appears if the user number entered is an invalid user number To Deletea User 1 Enter Installeror Master or Manager code and press the CODE key User Number to be deleted 2 Enter Master or Manager code first entered dE Delete User The system will recognize that the User number is already in use and will prompt to confirm that it should be deleted Press 0 NO or 1 YES dc Code Deleted If yes that user s code will be removed from ail partitions to which it was assigned and all authorization levels and other Information about that user will be deleted Note that a user can only be deleted from the partition in which it was first assigned and can only be deleted by a user with a higher authority level A User s security code cannot be deleted by oneself Event Log Note Please note that the Vista40 Event Log now holds up to 100 events e ALARM DEVICE MANUFACTURING CORPORATION ADEMCO A DIVISION OF PITTWAY CORPORATION 165 Eileen Way Syosset New York 11791 Copyright 1995 PITTWAY CORPORATION2. FIXED KEYPAD SUPPLEMENT Using A Fixed Word Keypad To Add Delete Security Codes The User Manual provided with the system explains how to add and delete user security codes using an alpha style keypad This supplement explains how to add and delete a security code using a fixed word style keypad if the system is set up as a single partition system only To Adda User 1 Enter Installer or Master or Manager code and press the CODE 8 key Enter the new user s 2digit User Number 02 69 Enter 4 digit security code for that user The following prompts appear Ed Edit Mode appears briefly then Ad Add User Enter 1 to add a new user code Entering 0 will change the existing user s code to the code entered in step 3 EA Authority Level Enter the authority level 1 6 for this user within this partition 1 master 3 operator A 5 operator C 2 manager 4 operator B 6 duress code OC OpedClose This prompt appears only if the Installer code was used to start this procedure Press 1 if open close reporting is desired for this user Press O if not desired For users being added by the master or manager code open close reporting is automatically assigned if the mastedmanagerwas assigned this reporting by the installer 00 RF Button This prompt will appear if a 5800 series button transmitter has been supplied and has not yet been assigned to a user Press 1 if a button transmitter will be assignedto this user Otherwise press 0 00
Download Pdf Manuals
Related Search