SRT 5855 UM
Contents
1. A E a 2 2 E 4 ES 7RONG IMPORTANT gt s z i ENSURE THAT THE 3 775855 nigral Terrestrial Receiver i CARD IS THIS WAY UP eed IMPORTANT 3 ENSURE THAT THE EJECTION FILM IS ON TOP OF THE CARD 6 2 Activating the card The Strong SRT 5855 Digital Terrestrial Television Receiver will allow access to broadcast ers such as Top Up TV and The Fantasy Channel when an authorized subscriber card is correctly inserted into the card slot in the front of the receiver To contact Top Up TV telephone 08712 712 712 To contact The Fantasy Channel telephone 0870 0855 100 www strongsat com 25 STRONG DIGITAL TV A1 Troubleshooting Occasionally receivers can hang up just like with a PC so you are recommended to reset the receiver by disconnecting it from mains power Wait 30 seconds and connect to mains power again and now check if the unit is working as expected If the receiver does not work properly after checking the trouble shooting section please contact the dealer Don t open the receiver cover it may cause an electrical shock due to high current voltage and the warranty of your receiver will be void if the receiver has been opened Symptoms The green red lights on front panel do not light up No picture and sound No picture and sound No picture and sound No sound Cause Solution The power cord is not Check that the power cord is plugged into plug2. follows Wait until the automatic scan has finished m Advanced Manual Scan search 1 Press the Menu button 2 Using UP DOWN keys select Installation and press SELECT www strongsat com 22 STRONG DIGITAL TV 3 Using UP DOWN keys select Channel Set up and press SELECT 4 Using RIGHT LEFT keys the pop up channel list will be displayed 5 Using the UP DOWN keys scroll to the frequency you wish to scan and press the SELECT key When you have selected your choice press the RED key 5 1 4 3 Parental Lock Changing PIN Code Please see inside cover Screen 1 26 This function changes the Personal Identification Number PIN that is used to control access to the menu and individual channels In this function you can lock unlock channels and you can change your PIN code by applying the following steps m To lock unlock the menu please apply the following steps 1 Press the Menu button on your remote 2 Using UP DOWN keys on your remote select Installation and press SELECT 3 The receiver will ask you to put your PIN code This PIN code is currently set to 0000 4 Using UP DOWN keys select Parental lock and press SELECT 5 Using RIGHT LEFT keys you can select either lock or unlock and press SELECT By selecting lock the receiver asks you to enter your PIN every time you want to access the menu By selecting unlock it gives you the possibility to access
3. STRONG DIGITAL TV Fo Por s or a B 5 od E TEO TP E PUE EET NM Digital Terrestrial Receiver SRT 5855 User Manual www strongsat com ama ALME 5855 ciatarerestia Receiver i Figure 1 offro cem Figure 2 8 Figure 4 Figure 10 oe Figure 5 Figure 6 STRONG DIGITAL TV Table of Contents 1 0 Usage 3 Tal Safety Instructions 4 1 2 Features amp Accessories 5 13 Safety Precautions 6 1 4 Storage 7 1 5 Equipment Set up 7 2 0 Your DVB T Receiver 8 2 1 Front Panel 8 27 Rear Panel 8 2 3 Basic Functions Remote Control 10 3 0 Connections 12 3 1 Connecting to your TV amp VCR 12 ci Basic connection with a coaxial cable 12 3 1 2 Basic connection with a Scart cable 12 3 1 3 Advanced connection 12 3 1 4 Connection with Audio Cable RCA Connectors 13 3 125 Conn
4. SELECT or the Right button and set the UHF channel number to the same UHF channel number of your TV set This only has to be done if your TV set is connected with a coaxial RF Cable If the UHF Channel numbers of the receiver and the TV set are not set the same no picture will be displayed Select a channel between 21 and 69 and press SELECT to confirm 2 Press BACK until you go back to main menu m OSD Settings You can set the OSD On Screen Display on your TV to your personal preferences You can change the OSD settings by applying the following steps 1 Select OSD Settings and press SELECT or the Right button m Colour Scheme Press SELECT or the Right button and set the colours of the OSD menu to Basic Colour 1 or Colour 2 m Transparency Press SELECT or the Right button and select how transparent you want your OSD m Brightness Press SELECT or the Right button and select how you want the OSD to be m OSD Timeout Press SELECT or the Right button and select how long you want the information banner to be on the screen when starting up your receiver or when changing channels 2 Press BACK until you go back to main menu m Time setting The system uses GMT Greenwich Mean Time as a default To set the time apply the following steps m Select GMT usage Press SELECT or the Right button and use the UP DOWN buttons to select the GMT usage ON or OFF ON activates the selection Time
5. an external remote eye if you wish to store your receiver in a place where the IR on your receiver cannot communicate with the remote For example if you wish to put your receiver in a closed environment such as a well ventilated closet 8 RS 232 Serial Port This serial port can be used to connect your PC to your receiver and enables you to download new versions of software into your receiver Note It is recommended to ONLY use the original software Loading other versions of software not adapted to your model number can cause severe damage to your receiver and will not be covered by the warranty 9 S PDIF Use this coaxial output to connect your receiver to the input of your digital audio amplifier 10 Power Cord Your receiver requires a main voltage supply of 220 V AC 50 60 Hz 5 Make sure to check the power supply specifications of the wall outlet before connecting your receiver to main power www strongsat com STRONG DIGITAL TV 2 3 Basic functions remote control Please see inside cover Figure 3 All features of the set top box can be controlled with the remote control Inserting batteries to the Remote Control Unit 1 Open the battery cover on the rear of the remote control Unit 2 Insert the two supplied batteries 1 5V observing the polarity and the AAA specification 3 Firmly replace the battery cover REMOTE KEY FUNCTIONS 1 STANDBY ON OFF Switches the Receiver ON or OFF 2
6. the menu all the time without the receiver asking you for a PIN code m To change your PIN code apply the following steps 1 Press the Menu button on your remote 2 Using UP DOWN keys select Installation and press SELECT 3 Using UP DOWN keys select Parental lock and press SELECT www strongsat com 23 STRONG DIGITAL TV 4 Using UP DOWN keys select Old PIN and enter 0000 5 Using UP DOWN keys select New PIN and enter a new PIN 6 Using UP DOWN keys select Verify PIN and enter the same new PIN 7 Press the Green button on your remote to Save amp Exit 8 Press the BACK button until you go back to main menu You are recommended to write down your new PIN code In case you forget it you can reset your receiver to factory default settings but you will lose all information you saved Your Personal PIN Code www strongsat com 24 STRONG DIGITAL TV 6 0 Pay TV subscribtion Please see inside cover Screen 27 29 and further details to be found in Main Menu gt SmartCard Your Strong SRT 5855 is equipped with an internal SECA Mediaguard decoder for PAY TV services using this standard of encryption only This decoder will allow access to broadcasters such Top Up TV and The Fantasy Channel when an authorized subscriber card is correctly inserted into the card slot in the front of the receiver 6 1 Putting your card into receiver The card must be inserted in this way
7. SUB Display subtitles of broadcast 3 HELP Unused For future applications 4 MUTE Enables or disables the audio 5 ARROW UP DOWN Moves cursor up or down for navigating within the OSD menu 6 ARROW RIGHT LEFT Moves cursor to right or left for navigating within the OSD menu 7 7 SELECT OK see inside cover screenshot 30 Selects function highlighted in OSD 8 i INFO Selects channel information banner 9 AV Selects TV or Digital TV 10 AUDIO Displays audio track selection www strongsat com 10 STRONG DIGITAL TV 11 BACK Navigates you back to the previous OSD menu 12 TEXT Enables Digital Text menu 13 MENU Selects the main OSD menu for setting the receiver 14 VOL Used for adjusting the volume up or down 15 CHANNEL UP DOWN Selects the next channel up or down 16 BACK Returns to TV mode from Text or Guide modes 17 GUIDE Displays the extended program guide 18 RED Navigation key for interactive services and menu modes 19 GREEN Navigation key for interactive services and menu modes 20 BLUE Navigation key for interactive services and menu modes 21 YELLOW Navigation key for interactive services and menu modes 22 0 9 Numeric Keys Direct entry for channel selection and Text page entry www strongsat com 11 STRONG DIGITAL TV 3 0 Connections 3 1 Connecting to your TV amp VCR 3 1 1 Basic connection with a coaxial cable Plea
8. Zone OFF activates Set Local Time Date Press SELECT to save your setting www strongsat com 20 STRONG DIGITAL TV m Select Time Zone Press SELECT or the Right button and a list of the GMT plus or minus the hours you need for your country is displayed Using UP DOWN keys select the correct one and the receiver will automatically show the current time in your country To set the time manually m Select Set Local Time Press SELECT or the Right button Use your UP DOWN buttons or Numeric buttons 0 9 to set the local time When set press SELECT to save the local time m Select Set Date Press SELECT or the Right button and set the date the way you have set the time 2 Press the BACK button until you go back to the Main Menu m Power on channel This function allows you to set the channel you want when the receiver turns on To set the power on channel apply the following steps 1 Select Power on Channel and press SELECT or the Right button m Last Viewed The receiver will start up with the channel that you viewed before turning the receiver off m Define Channel This function allows you to set the channel you want when the receiver turns on To define the channel apply the following steps Je Press SELECT or the Right button and select in the TV or radio list of channels the channel you want to have your receiver start up with m System Information The system information displays informati
9. area More information available from FREEVIEW on 08708 809980 Top Up TV on 08700 543210 or Text your postcode to 83331 standard rates apply 2 0 Your DVB T Receiver 2 1 Front Panel Please see inside cover Figure 1 1 Power Button Turns the receiver ON OFF 2 The 3 LED s Indicate Stand BY ON and SIGNAL locked The red LED is the stand by indicator The green LED is the Power On indicator The orange LED lights up once you correctly receive an antenna signal signal locked 3 UP DOWN Buttons Changes the channels UP DOWN in no menu state 4 Card Reader Insert your Pay TV subscriber card here 2 2 Rear Panel Please see inside cover Figure 2 1 ANTENNA INPUT Connect the antenna cable to this connector 2 RF OUTPUT Gives you the possibility to connect the receiver to TV by RF cable www strongsat com STRONG DIGITAL TV 3 AUDIO Right and Left Red amp White RCA These connectors give you the possibility to connect the audio signal to an external amplifier or to the audio input of your TV 4 VIDEO Yellow RCA This connector has a constant video signal for additional VCR connections 5 TV Scart Connector Use this connector to connect your receiver to your TV using a scart cable 6 VIDEO Scart Connector Use this connector to connect your receiver to your video recorder using a scart cable Your video signal will now be looped through to your TV 7 IR SENSOR Use this connector to connect
10. ded m Single Smart Card reader for Pay TV services Conditional Access for Mediaguard Accessories m User s Manual m Standard remote control unit m 2x Batteries AAA type m Scart cable Optional Accessories m Remote Eye Note The batteries should not be recharged disassembled electrically short circuited or be mixed or used with other types of batteries 1 3 Safety Precautions To maintain your receiver s optimum performance you are advised to apply the following safety precautions m Read this manual carefully and make sure you fully understand the instructions given m Refer all maintenance or servicing to suitably qualified personnel m f you wish you may clean your receiver with a soft lint free cloth slightly made damp with a mild soap solution only after disconnecting from the mains voltage supply m Do not use alcohol or ammonia based liquids to clean the receiver m Do not open the receiver cover as you will be exposed to a shock hazard m Do not open the receiver cover this will void your warranty www strongsat com STRONG DIGITAL TV m Do not place any objects on top of the receiver because this might prevent proper cooling of the components inside m Make sure no foreign objects fall through the ventilation slots because this could cause fire or an electric shock m Wait a few seconds after switching off the receiver before you move the receiver or disconnect any equipment m Please ensu
11. ection to a digital audio amplifier using the S PDIF output 13 3 1 6 Connecting a remote eye optional accessory 13 3 1 7 Connecting a serial cable for downloading software 14 4 0 Starting up 14 4 1 Starting up for the First Time 14 5 0 Basic settings 15 Sala Main Menu 15 5 1 2 Channel Organizer Menu 15 5 1 3 The Timer Menu 16 5 1 4 The Installation Menu 18 5 1 4 1 System Set up Menu 18 5 1 4 2 Channel Set up 22 5 1 4 3 Parental Lock Changing PIN Code 23 6 0 Pay TV Subscription 25 6 1 Putting your card into the receiver 25 6 2 Activating the card 25 A1 Troubleshooting 26 A2 Glossary of terms 28 A3 Technical specification 30 www strongsat com STRONG DIGITAL TV Thank you for choosing this Strong Digital Terrestrial Television Receiver This receiver is of our latest development and it is designed to be capable of upgrading its software through the PC It is highly recommended that you read this manual carefully to safely install your receiver and to achieve its optimum performance 1 0 Usage This user manual is applicable for Strong SRT 5855 Digital Terrestrial Receiver and its related accessories It is advised that first time and experienced users read this manual in order to safely install the receiver Strong has supplied this product with the most recent innovations of software and hardware Strong reserves the right to make changes in production to the software used by your terrestrial receiver without prio
12. ency Range 177 50 266 50 MHz and 474 00 858 00 MHz RF input Signal Level 87 20 dBm Loop through frequency range 47 862 MHz User friendly Remote Control with colour buttons Batteries 2 Size AAA Antenna Input IEC Female RF output T type IEC Male RF modulator frequency range 471 25 855 25 MHz 21 69 ch 2 SCART outputs TV and VCR S PDIF coaxial output 3 RCA Audio L R Video IR Sensor Data Interface Serial Port RS 232 9 pin D sub type Internal power supply 110 220 V AC 50 60Hz Flash Memory 4 Mbytes SDRAM 8 Mbytes EEPROM 64 kBytes Main processor STi 5518 30 www strongsat com STRONG Decoder Card Reader Smart Card Reader General Data DIGITAL TV Media Guard Embedded Mediaguard ISO 7816 1 2 3 Input Voltage range 90 240 V AC 50 60 Hz Power consumption max 25 W Stand by mode 13 W Operating Temperature 5 C 45 C Storage Temperature 0 C 50 C Humidity 2596 7096 Size WxHxD in mm 280 x 40 x 203 Weight 2 kg www strongsat com 31
13. ged in TV is set to wrong channel Problem in cable connections between receiver and TV Receiver hang up The receiver or TV is in MUTE mode the wall outlet Check if the TV is switched on and set your TV to the correct EXT AV or UHF channel Check if the scart and or RF cable is connected correctly to the TV and to the back of the receiver Disconnect the main power cord of the receiver from the 220V main power Reapply the power and Reset from the menu Retuning as if for the first time Press the MUTE button on the remote control unit of your receiver and TV 26 www strongsat com STRONG No sound or picture The receiver displays the message No or bad signal during bad weather condi tions The receiver displays the message No or bad signal The receiver displays the message No or bad signal The remote control is not working Pay TV services do not appear on screen Pay TV services do not appear on screen Problem in scart cable connections between receiver and TV This is normal the bad weather is interfering the signal of the antenna DIGITAL TV Firmly press the scart connectors on the backside of the TV and receiver Replace the scart cable Once the weather is better the picture will appear Wrong parameters set Check settings of antenna and Channel set in the menu Wrong alignment of the an
14. ithin this menu The installation menu contains several sub menus such as System Set up Antenna Setup Channel Set up and Parental Lock To access the different sub menus apply the following 5 1 4 1 System Set up Menu Please see inside cover Screen 8 22 Please note that for first time install all these parameters have been preset for use in the UK on a standard 4 3 ratio colour TV screen To install your receiver to your personal preferences go to System Set up menu Then please apply the following steps 1 Press the Menu button 2 Using UP DOWN keys select Installation and press SELECT 3 Using UP DOWN keys select System Set up and press SELECT m Language Settings You can change the language of the menu audio and subtitles by applying the following steps 1 Select Language Settings and Press SELECT or the Right button 2 You can also choose your preferred first audio language second audio language and the subtitle language by applying the same steps 3 Press BACK until you return to the main menu www strongsat com 18 STRONG DIGITAL TV m TV VCR Settings You can set the TV VCR settings to your personal preferences Check your TV and VCR user manuals for the correct settings You can change your TV VCR settings by applying the following steps 1 Select TV VCR Settings and press SELECT or the Right button m TV Mode Press SELECT or the Right button and se
15. nel Organizer Menu Please see inside cover Screen 2 4 The Channel Organizer menu enables you to sort channels by Logical Channel Number by Name Type or TP Frequency m Press Menu key 13 m Using the arrow up or down keys 5 move the cursor until the highlight colour is over Channel Organizer press the SELECT key 7 m Using the RED 18 to sort channels or GREN key 19 to delete channels Please be careful if deleting as you will need to retune to recover deleted channels www strongsat com 15 STRONG DIGITAL TV 5 1 3 The Timer Menu Please see inside cover Screen 5 7 The timer can automatically switch your receiver off or on at any time This enables you to record programs with your VCR while you are not at home It also can be used to wake you up at the time you set it Timer Setup Menu m Current Hour This is the time NOW m Current Date This is today s date Timer Number 1 8 Events can be programmed m Status Enable or Disabled event m Action Power On Off or Time Interval event m Repetition One time Daily or Weekly event m Date Date you want the event to start m Hour The time you want the event to start m End Time The time you want the event to end when in Interval Time mode m Channel The channel you want in the event 1 Press the Menu button 2 Using the UP DOWN keys on your remote select Timer Menu and press Select m Timer number Choose event number 1 to 8 m Timer Stat
16. o cable between the RCA connectors of the receiver and those of your TV set VCR or amplifier 3 1 5 Connection to a digital audio amplifier using the S PDIF output Please see inside cover Figure 8 m Connect the S PDIF out connector on the back of your receiver to the S PDIF input connector of your digital amplifier using a coaxial cable m Do not forget to turn the S PDIF function on Main menu gt Installation gt PIN code 0000 gt TV VCR Settings gt SPDIF Output gt On 3 1 6 Connecting a remote eye Please see inside cover Figure 9 m Connect the IR sensor to your remote eye if you wish to store your receiver in a place where the IR on your receiver cannot communicate with the remote For example if you wish to put your receiver in a closed environment such as a well ventilated closet www strongsat com 13 STRONG DIGITAL TV 3 1 7 Connecting a serial cable for downloading software Please see inside cover Figure 10 m Connect the RS 232 connector on the back of your receiver to the Serial port of your computer using a serial cable 4 0 Starting up Ensure that your terrestrial receiver is correctly connected to your television and dish and that your antenna signal is of good quality Ifyou are not sure about this then ask your local Strong dealer to check your installation or antenna signal 4 1 Starting up for the First Time m Connect your DVB T receiver as described under one
17. ock other several functions of the receiver to prevent unauthorized users such as children to view channels that are not suitable for them A PIN code is required to use of the parental lock The transmitted packages have identifiers PID that tell the receiver what to do with the received information Receivers normally use four types of PID these are V PID video PID A PID audio PID P PID Program PID and data PID EPG information 28 www strongsat com STRONG DIGITAL TV IN CODE Personal Identification Number A personal code that is used for locking or unlocking the parental control feature RS 232 Serial data port Subscriber Card A card usually issued by a broadcaster to allow authorized access to their programs For example Top Up TV www strongsat com 29 STRONG DIGITAL TV A3 Technical specifications Demodulator Video Decoder Audio Decoder Tuner Remote Control Connectors System and Memory Demodulation QPSK 16QAM 64QAM OFDM Spectrum 2K 8K Input Symbol Rate 3 45 Ms s Profile level MPEG 2 Main Profile Main Level Input MPEG2 Video decoding ISO EC 13818 2 up to 15 Mbits s Video Resolution 720 x 576 pixels for PAL Aspect Ratio 4 3 16 9 Pan amp Scan Letterbox MPEG MusiCam layer amp Il Sampling rate 32 44 1 48 kHz Audio mode Stereo Stereo Dual Channel Joint Stereo Mono AC 3 Front End DVB T UHF amp VHF Tuner Input Frequ
18. of the points in paragraph 3 m Press MENU key 13 m Using the arrow up or down keys 5 move the cursor until the highlight colour is over INSTALLATION Press the SELECT key 7 m Using the arrow up or down keys 5 move the cursor until the highlight colour is over CHANNELS SETUP Press the SELECT key 7 m To select AUTOMATIC tuning press the RED function key 18 m Wait a few minutes while the tuning automatically finds and loads all the channels When tuning has completed press the BACK key 11 to view the picture www strongsat com 14 STRONG DIGITAL TV 5 0 Basic settings Note Every time the receiver asks you to put your PIN code enter 0000 on your remote control using 0 9 numeric keypads 5 1 1 Main Menu Please see inside cover Screen 1 All the important settings and features of your receiver can be operated from the Main Menu The Main Menu consists of several sub menus such as Channel Organizer Timer Installation To display and navigate through the main menu of the receiver please apply the following steps 1 Press the Menu button 2 Use UP DOWN keys to navigate through the menu 3 Press SELECT button every time you select an item from the menu 4 Press the BACK button to terminate an operation 5 Press the BACK button until you go back to main menu Tip In MENU modes always read the Help bar displayed at the bottom of your screen 5 1 2 Chan
19. on about your receiver such as model number software and boot version To check system information apply the following steps 1 Select System information and press SELECT or the Right button 21 www strongsat com STRONG DIGITAL TV m Factory Reset Be careful when using this function because it will erase all the data and parameters you may have set earlier to your receiver Once you have made a Factory Reset you will have to re install your preferences and re scan your channels To reset your receiver to factory default apply the following steps 1 Select Factory Reset and press SELECT 2 Enter your PIN Code The receiver will reset itself to the original factory settings 3 Before using the function Automatic Scan search see 5 1 4 3 select Country selection 5 1 4 2 first Note Your PIN code will change back to the factory setting 0000 5 1 4 2 Channel Set Up Please see inside cover Screen 1 23 25 The channel set up is for downloading all DVB T available TV and Radio channels There are two possibilities for downloading the services m Automatic Scan search 1 Press the Menu button 2 Using UP DOWN keys select Installation and press SELECT 3 Using UP DOWN keys select Channel Set up and press SELECT 4 Using UP DOWN keys select Auto Scan and press SELECT 5 The screen Auto Detection appears first Thereafter the screen Auto Scan
20. r notification In order to maintain and ensure that your receiver is compatible and updated with the most recent software technology we recommend that you visit our website to check the latest software www strongsat com www strongsat com STRONG DIGITAL TV 1 1 Safety Instructions Warning DO NOT INSTALL YOUR RECEIVER m In a closed or poorly ventilated cabinet m Directly on top of or under any another equipment m On a surface which might obstruct the ventilation slots DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES m To direct sunlight or near any other equipment that generates heat m To rain or intense moisture m To any shock which may cause permanent damage to your receiver m To any magnetic objects such as loudspeakers transformers etc m To intense vibration m Never open the cover It is dangerous to touch the inside of the receiver due to high voltage currents and possible electrical hazards Your warranty will be void ifthe receiver has been opened m When the receiver is not used for a long period of time you should unplug the power cord from the wall socket m Do not use a damaged power cord lt may cause a fire or an electrical shock m Do not touch a power cord with wet hands It may cause an electric shock m Place the receiver in a well ventilated environment m When you are connecting the cables be sure that the receiver is disconnected from the mains supply voltage m Do not use you
21. r receiver in a humid environment www strongsat com STRONG DIGITAL TV Make sure you read this user manual before installing your receiver This manual provides complete instructions for installing and using this receiver The following symbols will be used as follows Bold Characters Represents a button on the remote control or the receiver Italic Characters Represents a menu item within the On Screen Display OSD Menu 1 2 Features amp Accessories SRT 5855 Digital Terrestrial Receiver m Easy to use Graphic MENU Interface m Automatic channel scan m 2 TV SCART Connectors VCR and TV m 3 RCA Connectors CVBS Audio Left Right m Multi Language function Menu Audio m IR sensor connector for connecting an external remote eye to control the receiver available as accessory m Front Panel Buttons amp standard remote control m EPG Electronic Program Guide for on screen channel information m Over 250 channels memory capacity m 2 Operation Modes Digital TV Digital Radio m Digital Tuner with Loop through output m MPEG 2 Main Profile at Main Level m Supports software downloading via PC through RS 232 port for updating software and additional services m S PDIF output for connection with a digital audio amplifier m Built in UHF modulator www strongsat com STRONG DIGITAL TV m For all digital Free To Air TV and Radio programmes via your TV antenna no satellite or cable connection nee
22. re that that the electrical power supply corresponds with the voltage on the electrical identification plate at the back of the receiver m t is a necessity that you only use an approved extension and compatible wiring that is suitable for the electrical power consumption of the installed equipment m If the receiver does not operate normally even after strictly following the instructions in this user manual it is recommended to consult your dealer 1 4 Storage Your receiver and its accessories are stored and delivered in protective packaging against electric shocks and moisture When unpacking it make sure that all the parts are included and keep packaging away from children When transporting the receiver from one place to another or if you are returning it under warranty make sure to store the receiver in its original packaging with its accessories Failing to comply with such packaging procedures could void your warranty 1 5 Equipment Set up We recommend you to consult a professional installer to set up your equipment Otherwise please follow the following instructions m Refer to the user manual of your TV and or your antenna m Make sure that the SCART cable is in a good condition www strongsat com STRONG DIGITAL TV m Make sure that the SCART cable connections are well shielded m Make sure that the outdoor components of the antenna are suitable for Digital Terrestrial reception and that you are in a coverage
23. se see inside cover Figure 4 m Connect the antenna cable of your terrestrial antenna with the ANT input m Connect to RF OUT connector at the back of the receiver to the ANT IN connector on your TV set 3 1 2 Basic connection with a Scart cable Please see inside cover Figure 5 m Connect the antenna cable of your terrestrial antenna with the ANT input m Connect the TV scart connector at the back of the receiver to the scart in connector on your TV set 3 1 3 Advanced connection Please see inside cover Figure 6 m Connect the antenna cable of your terrestrial antenna with the ANT input m Connect the TV scart connector at the back of the receiver to the scart in connector on your TV set m Connect the VCR scart connector at the back of the receiver to the scart in connector on your VCR set m Connect a coaxial cable to the TV VCR connector at the back of the receiver Connect the other end of this coaxial cable to the ANT IN connector of your VCR m Connect the TV OUT connector of your VCR to the ANT IN connector of your TV set with a coaxial cable www strongsat com 12 STRONG DIGITAL TV Note If you have a digital audio amplifier with a digital audio input use the S PDIF output 3 1 4 Connection with Audio Video RCA Cable Please see inside cover Figure 7 m On the back of your receiver you will find the RCA connectors Audio Left amp Right Red amp white Video Yellow m Install an audio vide
24. t your TV mode to Multi PAL or NTSC m Video Mode Press SELECT or the Right button and set your VCR mode to CVBS Composite video or RGB preferred option if your TV set is compatible with it m Screen Mode Press SELECT or the Right button and set your screen mode to 4 3 Full Screen 4 3 Letter or 16 9 m Audio Output Press SELECT or the Right button and set your audio output to Stereo Left only or Right only left or Right is for mono TV sets m S PDIF Output Press SELECT or the Right button and activate your S PDIF output on the back of your receiver so you can connect it to a digital Audio amplifier using a coaxial cable m VCR Scart Press SELECT or the Right button and set the scart output to Auto or STB Set Top Box If set to STB the VCR scart signal is not automatically looped through m Antenna power ON OFF Antenna Power is preset in OFF Mode Only when using an active antenna this function must be switched ON Press SELECT or the Right button to select ON m UHF Mode Press SELECT or the Right button and set the UHF mode to PAL B G PAL I or PAL D K If the TV set is connected using a coaxial RF cable you must select RF modulator type here The RF modulator type affects the channel audio Select PAL for UK NI or ROI use www strongsat com 19 STRONG DIGITAL TV m UHF Channel Press
25. tenna The batteries of the remote control are not inserted or exhausted up menu Ask your dealer to check the outdoor unit and antenna cable Check whether the batteries are inserted correctly in your remote control Check the batteries and if they are exhausted replace them Card is not authorized Contact your service provider Top Up TV Card is not inserted correctly and error message appears on screen Remove card and reinsert correctly see instructions in chapter 6 www strongsat com 27 STRONG DIGITAL TV A2 Glossary of terms CA DVB T EPG MPEG Network OSD PAL Parental lock Conditional Access Usually means that the channels are scrambled and require a subscription to be paid Digital Video Broadcasting Terrestrial Digital TV via antenna the same as DTT Digital Terrestrial Television Electronic program guides that are transmitted by some broadcaster to display information guide about a program content The Moving Picture Experts Group is founded by the ISO MPEG is a standard method for digital transmission of video and audio A network which is also known as a bouquet is a set of channels that is offered by a single broadcaster On Screen Display A menu system that you navigate from your remote control Referring to the Phase Alternate Line colour system adopted by European broadcasters This function gives you the possibility to l
26. us Set to Enabled to use the timer function or Disable to stop the timer functions of the timer number you selected www strongsat com 16 STRONG DIGITAL TV Action You can select one of the following actions in the timer mode m Power On The receiver powers on at the designated date and time m Time interval The receiver switches on at the designated date and time displays the channel and then switches off at the designated date and time The value set at the ending time u Power Off The receiver powers off at the designated date and time m Set the Date using the 0 9 numeric keys m Set the Hour using the 0 9 numeric keys you may need to clear a previous setting using the arrow left key m Set the End Time if you are using Interval Time m Set the channel by pressing the Select key and choosing from the pop up list 3 Press the Red button to save and proceed with another timer event 4 Press the Green button to save and exit the timer menu 5 Press the Yellow button to exit the timer menu WITHOUT saving the settings Tip You have to select the channel starting time and ending time settings if the Timer mode is Time interval An error message will appear if any of the settings are incorrect www strongsat com 17 STRONG DIGITAL TV 5 1 4 The Installation Menu Please see inside cover Screen 1 All settings that are related to TV channel search are w
Download Pdf Manuals
Related Search