LED Dancefloor
Contents
1. SAFETY INSTRUCTIONS Every person involved with the installation operation and maintenance of this device has to gt be qualified follow the instructions of this manual CAUTION Be careful with your operations With a dangerous voltage you can suffer a dangerous electric shock when touching the wires Before your initial start up please make sure that there is no damage caused by transportation Should there be any consult your dealer and do not use the device To maintain perfect condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual Please consider that damages caused by manual modifications to the device are not subject to warranty This device contains no user serviceable parts Refer servicing to qualified technicians only IMPORTANT The manufacturer will not accept liability for any resulting damages caused by the non observance of this manual or any unauthorized modification to the device Never let the power cord come into contact with other cables Handle the power cord and all connections with the mains with particular caution Never remove warning or informative labels from the unit Do not open the device and do not modify the device Do not connect this device to a dimmerpack Do not shake the device Avoid brute force when installing or operating the device Never look directly into the light source2. 1 Power supply Check that the unit is plugged into an appropriate power supply 2 The LEDs Return the LED Dancefloor to your Showtec dealer 3 The fuse Replace the fuse Replacing the Fuse Power surges short circuit or inappropriate electrical power supply may cause a fuse to burn out If the fuse burns out the product will not function whatsoever If this happens follow the directions below to do so 1 Unplug the unit from electric power source 2 Insert a screwdriver into the slot in the fuse cover Turn the screwdriver to the left at the same time gently push a bit Turn and Push The fuse will come out 3 Remove the used fuse If brown or unclear it is burned out 4 Insert the replacement fuse into the holder where the old fuse was Reinsert the fuse cover Be sure to use a fuse of the same type and specification See the product specification label for details Product Specification Model Showtec LED Dancefloor Voltage AC 230V 50Hz CE Power 113 W Fuse T1 5A 250V Neutrik Powercon connectors input and output XLR connectors DMX input and output Sound controlled via built in microphone Dimensions 1000x1000x104mm LxWxH incl bracket Weight 51 8 kg Design and product specifications are subject to change without prior notice 2005 Showtec
3. Never leave any cables lying around Do not switch the device on and off in short intervals as this would reduce the lamp s life Never use the device during thunderstorms unplug the device immediately Only use device indoor avoid contact with water or other liquids Avoid flames and do not put close to flammable liquids or gases Only operate the device after having familiarized with its functions Always allow free air space of at least 50 cm around the unit for ventilation Always disconnect power from the mains when device is not used or before cleaning Only handle the power cord by the plug Never pull out the plug by tugging the power cord Make sure that the device is not exposed to extreme heat moisture or dust Make sure that the available voltage is not higher than stated on the rear panel 6 8 8 md Make sure that the power cord is never crimped or damaged Check the device and the power cord from time to time The cable insert or the female part in the device must never be strained There must always be sufficient cable to the device Otherwise the cable may be damaged which may lead to deadly electrical shocks ifthe external cable is damaged it has to be replaced by a qualified technician If device is dropped or struck disconnect mains power supply immediately Have a qualified engineer inspect for safety before operating lf the device has been exposed to drastic temperatu
4. F S button to choose the desired Chase E You can adjust the chase from ch ichUS Master Slave Mode Adjust speed from 1 100 1 Press the MODE button until the display reads ch N Master Slave Mode 2 Use the UP and DOWN buttons to select Master Slave 3 Press the F S button to choose the desired Chase You can adjust the chase from IchO chOS 4 Press the F S button to adjust the Chase Fade Time You can adjust the fade from F090 F100 5 Press the F S button to adjust the Spend You can adjust the speed from 5001 5100 Maintenance The operator has to make sure that safety relating and machine technical installations are to be inspected by an expert after every four years in the course of an acceptance test The operator has to make sure that safety relating and machine technical installations are to be inspected by a skilled person once a year The following points have to be considered during the inspection 1 All screws used for installing the device or parts of the device have to be tightly connected and must not be corroded 2 There may not be any deformations on housings fixations and installation spots 3 Mechanically moving parts like axles eyes and others may not show any traces of wearing 4 The electric power supply cables must not show any damages or material fatique The Showtec LED Dancefloor requires almost no maintenance However you should keep the unit clean Otherw
5. 250V 2 XLR Input DMX OUT 6 ON OFF 3 Powercon Output 7 Microphone 4 Powercon Input 8 Function Display Set Up and Operation Before plugging the unit in always make sure that the power supply matches the product specification voltage Do not attempt to operate a 120V specification product on 230V power or vice versa Always disconnect from electric mains power supply before cleaning or servicing Damages caused by non observance are not subject to warranty DMX Operation 12 Channel Mode 3 Channel Mode z c DMX address 1 512 1 Press the MODE button until the displav reads gn DMX Mode 2 Press the F S button to start the DMX channel setting mi DMX Mode 1 12 channel operation Control each LED Dancefloor section bl separately ii d DMX Mode 2 3 channel operation Control all 4 sections of the LED Dancefloor a as one big piece 3 Press the F S button to start the DMX address setting Use the UP and DOWN buttons to select the DMX address 4 The DMX Channel functions are Channel 1 Red 0 255 Channel 2 Green 0 255 Channel 3 Blue 0 255 Sound active Operation i i G ii l Adjust speed from 1 100 1 Press the MODE button until the display reads 5 d fi Sound Active Mode 2 Use the UP and DOWN buttons to select Master Slave N Master 5 d 741 U d C Slave 3 Press the F S button to adjust the Speed You can adjust the speed from 5001 5100 4 Press the
6. LED Dancefloor ORDERCODE 42300 SHOWELECTRONICS FOR PROFESSIONALS Congratulations You have bought a great innovative product from Showtec The Showtec LED Dancefloor brings excitement to any venue You can rely on Showtec for more excellent lighting products We design and manufacture professional light equipment for the entertainment industry New products are being launched regularly We work hard to keep you our customer satisfied For more information iwant showtec info You can get some of the best quality best priced products on the market from Showtec So next time turn to Showtec for more great lighting equipment Always get the best with Showtec Thank you Showtec Showtec LED Dancefloor Product Guide Warning Safety instructions add Operating Determinations A AA a OO M hi i A NEAR PEA A eee Backsida iwa EM cn En set Up and OSSIAN ga i EA JE D SE EN EZ DMX Mode A ee AT SULIT TC EAS LEER PMR owe RE EU NA eR ae ee EU Master Slave Mode ccccccccceccvcececcceseteecsecscesesesencaaeseeusenaaesesacuaacensgecaccangeseuseuaaveunscusens Co D M lem TOO o A No Light A A EE EN KA PARADO Replacing the Fuse idea a A en re ee caer et 0 0 0 A Dj i II ane ones nent O WARNING CAUTION JN Keep this device away from rain and moisture N FOR YOUR OWN SAFETY PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START UP
7. ise the fixture s light output will be significantly reduced Disconnect the mains power supply and then wipe the cover with a damp cloth Do not immerse in liquid Wipe lens clean with glass cleaner and a soft cloth Do not use alcohol or solvents Keep connections clean Disconnect electric power and then wipe the connections with a damp cloth Make sure connections are thoroughly dry before linking equipment or supplying electric power Troubleshooting This troubleshooting guide is meant to help salve simple problems If a problem occurs carry out the steps below in sequence until a solution is found Once the unit operates properly do not carry out following steps 1 If the device does not operate properly unplug the device 2 Check the fuse power from the wall all cables etc 3 If all of the above appears to be O K plug the unit in again 4 If you are unable to determine the cause of the problem do not open the LED Dancefloor as this may damage the unit and the warranty will become void 5 Return the device to your Showtec dealer No Light This troubleshooting guide is meant to help solve simple problems If a prablem occurs carry out the steps below in sequence until a solution is found Once the unit operates properly do not carry out following steps If the light effect does not operate properly refer servicing to a technician Response Suspect three potential problem areas the power supply the LEDs or the fuse
8. m ambient temperature t 45 C must never be exceeded The relative humidity must not exceed 50 with an ambient temperature of 45 C lf this device is operated in any other way than the one described in this manual the product may suffer damages and the warranty becomes void Any other operation may lead to dangers like short circuit burns electric shock lamp explosion crash etc You endanger your own safety and the safety of others Improper installation can cause serious damage to people and property ae ka Connection with the mains Connect the device to the mains with the power plug Always pay attention that the right color cable is connected to the nght place Cable Pin international BROWN FASE um ju WW VELLOWIGREEN eani O Make sure that the device is always connected properly to the earth Description of the device Features The LED Dancefloor is a fabulous LED Lighteffect from Showtec Never change lamps again s Each element is divided into 4 sections 3 channel mode the whole LED Dancefloor will have the same colour or 12 channel mode each section can be controlled separately Topcover of the LED Dancefloor is made of 12mm strong plastic Lecran e Plug amp Play Overview Fig 1 Backside FUSE POWER HOME oe nv iiia O DMX Output DMX Input Power Output Powor Inpui Powtt 230040 2504 116 OFF FUNCTION DISPLAY 1 XLR Output DMX IN 5 Fuse T1 54
9. re fluctuation e g after transportation do not switch it on immediately The arising condensation water might damage your device Leave the device switched off until it has reached room temperature If your Showtec device fails to work properly discontinue use immediately Pack the unit securely preferably in the original packing material and return it to your Showtec dealer for service For adult use only Lighteffect must be installed out of the reach of children Never leave the unit running unattended The user is responsible for correct positioning and operating of the LED Dancefloor The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device This device falls under protection class Therefore it is essential to connect the yellowgreen conductor to earth Repairs servicing and electric connection must be carried out by a qualified technician For replacement use fuses of same type and rating only WARRANTY Till one year after date of purchase y CAUTION l EYEDAMAGES Il VEN Avoid looking directly into the light source pl meant especially for epileptics OPERATING DETERMINATIONS This device is not designed for permanent operation Consistent operation breaks will ensure that the device will serve you for a long time without defects The minimum distance between light output and the illuminated surface must be more than 0 5 meters The maximu
Download Pdf Manuals
Related Search