user manual
Contents
1. Battery Cover Bottom View J J J J J Ke Tracking Rails E10 HANDHELD INTEGRATED POLYPHONIC GUITAR RESONATOR SRG AS 1 3 Functions The E O includes onboard trigger effects per channel LPF low pass filter e HPF high pass filter MUTE The forward left side trigger activates Left Channel LPF Mode attenuating high frequencies by 26 dB with the effect of a bass boost which produces a cello effect on heavy gauge strings The backward left side trigger activates HPF Mode attenuating low frequencies and enhancing harmonics The forward left side round button activates the Left Channel MUTE function The forward right side trigger activates Right Channel LPF Mode The backward right side trigger activates HPF Mode The forward right side round button activates the Right Channel MUTE function Rapid triggering or alternated triggering produces some very interesting special effects available only to the SRG 2 OPERATION 2 1 Instrument Compatibility The SRG functions on any stringed instrument with ferromagnetic strings including plain steel strings and steel core strings The E 10 is equally effective on light and heavy gauge strings and optimised for a 12 mm bridge saddle spacing as the pole spacing on the E10 is 11 mm accounting for a standard 648 mm string length2. SET UP gt After unpacking the box check that the power switches are in the OFF position downwards remove the battery cover and slide the included 9 Volt Battery into the battery compartment until firmly connected then replace the cover The battery cover is precision crafted to a tight slip fit tollerance and held in place by mechanical tension It is therefore important to fully close the battery cover and take care not to misplace or step on the cover when removed Be sure to check that the power switches are OFF before connecting the battery and that the polarity is correctly orientated as illustrated on page 6 Switch the 2 power switches Left and Right fully upwards to the ON position The blue LED power indicators will light up instantly when the power switches are on If the LEDs do not light or flicker either the battery is not firmly connected or the battery may be weak or dead The E AQ is fully operational the moment the 2 blue LEDs are on 1 2 Battery Compartment The E Series features an ultra fast slide in battery compartment for an internal 9 volt primary cell Eliminating the frustration of fumbling in the dark with clumsy floppy wire 9 volt battery connectors the E Series slide mount battery port allows rapid battery changes in as little as 5 seconds The E30 includes a 9 volt Alkaline Manganese primary cell which is safely disposable Under No Circumstances is the battery to be recharged
3. and 42 mm nut However the E10 also works perfectly well on narrow Steinberger guitar spacing The inner tracking rails on the EO span 4 strings 2 support strings and 2 resonated strings The unique Fang rail design allows more stable and accurate string mounting and tracking The E110 should Only be held over an XLS Divided String Sensor in Polyphonic Mode Where each driver feeds a single coil for normal hard driving string resonance The E110 should NOT be held directly over a Normal Guitar Pickup in Polyphonic Mode as the combined feedback of 2 drivers can cause harmonic saturation and signal overload The SRG is also capable of driving Acoustic Steel String Instruments without electromagnetic transducers although the tonal effects are less audible 2 2 Handling The SRG E Series is designed to be handheld between the thumb and index finger with the middle and ring fingers free to operate the triggers with the LEDs facing towards the nut of the instrument 2 3 String Mounting amp Tracking Place the guide rails on the 2 outer support strings with the support strings on the inside of the Fangs The SRG should rest absolutely level on the guide strings and never tilted to one side It s important to get a feel for the optimal positioning of the SRG through persistent practice Proper use of a cello bow is not learned in a day and neither is the proper use of an SRG both take practice 2 4 String Driving
4. or dismantled The storage life of the battery is 5 years Do not install a typical rechargeable NiMH battery as typical rechargeable 9V batteries actually supply only 8 4 volt rather than 9 volt The E30O requires a full 9 volt at 55 mA for stable operation If a rechargeable battery solution is needed then use the optional RX S Rechargeable 9 volt Battery which supplies a full 9 6 volts and 200 mA h of charge WARNING Damage resulting from the use of incorrect rechargeable batteries oversized batteries or incorrect installation can invalidate the warranty Battery Cover Battery Connector A Push to Connect E10 HANDHELD INTEGRATED POLYPHONIC GUITAR RESONATOR SRG AZ Right Side View RIGHT CHANNEL POWER SWITCH RIGHT CHANNEL HPF RIGHT CHANNEL LPF RIGHT CHANNEL MUTE Left Side View Be III lt LEFT CHANNEL MUTE LEFT CHANNEL LPF LEFT CHANNEL HPF LEFT CHANNEL POWER SWITCH E10 HANDHELD INTEGRATED POLYPHONIC GUITAR RESONATOR SRG AS Front View O O LO gt System Power Indicators Blue LED Back View nl Drive Channel E10 HANDHELD INTEGRATED POLYPHONIC GUITAR RESONATOR SRG AZ Top View Jl N d J j l VC NI J
5. Fa S C H C FR HANDMADE IN THE EUROPEAN UNION 2015 AESCHER EUROPA SRG lt STRING RESONANCE GENERATOR E10 User Manual E Series 1 SET UP 1 1 Overview 1 2 Battery Compartment 1 3 Functions 2 OPERATION 2 1 Instrument Compatibility 2 2 Handling 2 3 String Mounting amp Tracking 2 4 String Driving 2 5 Proximity Effects 2 6 Onboard Effects 2 7 Maintenance 1 SET UP 1 1 Overview The SRG E Series are a line of handheld internally powered string resonators based on nano scale SMDI architecture Available in monophonic and polyphonic models The SRG E10 package includes Handheld Integrated Polyphonic Guitar Resonator FV Alkaline Manganese Primary Cell Battery Optional Accessories XLG Divided String Sensor Kit HC 1 Holster Clip RX S Rechargeable 9 volt Battery The E 10 is the world s first Handheld Polyphonic Resonator Featuring 3 modes of operation and effect triggers for LPF HPF and MUTE for both Left and Right Channel The E 10 can operate in Polyphonic Mode or Monophonic Mode simply by switching OFF the Left Channel or Right Channel Power Switch The E10 is designed specifically for guitar featuring highly inductive low resonant frequency sensor and driver coils directly wound on neodymium core magnets The EO also features protruding FANG rails for accurate string tracking and 2 ultra bright deep blue LED power indicators one for each string
6. String driving resonance will initiate immediately after holding the SRG steady and level on the support strings Any deviation from top dead centre above and parallel to the driven string will result in various effects the most obvious being fade in fade out and reverse envelope effect All positional effects are a result of deviation from parallel top dead centre above the driven string The best path to finding desirable effects is through constant experimentation 2 5 Input Transducer Effects In Monophonic mode various Legato and Staccato effects are possible through the proximity and forward backward angular relationship between the driver and the magnetic core of the input transducer pickup on the instrument Most useful effects depend on this distance and angular relationship Provoking the input transducer in every conceivable manner will result in the discovery of more than a few useful effects Note The use of a headphone amp during the lower end of the learning curve is highly recommended Extraordinary efforts have been made in molesting the guitar to badly imitate the sounds of other instruments The best advice this manual can offer is to use other instruments rather than trying to imitate them and discover New sounds with the SRG 2 6 Onboard Effects The E O has 3 Operating Modes Normal Mode LPF Mode HPF Mode And also MUTE function 2 7 Maintenance If possible always st
7. ore the SRG in a dry dust free environment at room temperature 15 20 C Always remember to switch the BE 10 OFF when not in use Clean the SRG using a soft cotton cloth or t shirt soaked in warm water tight places may be cleaned using a cotton bud To remove minor scratches the SRG may be polished using 1000 grit wet amp dry sandpaper and rubbed with vegetable oil Never attempt to clean any part of the SRG with alcohol acetone ammonia or any household cleaner TECHNICAL SPECIFICATIONS SRG MODEL E10 Pole Spacing Supply Voltage Power Output Driver Resonant Frequency Sensor Resonant Frequency Core Magnets Quiescent Current Drain Operating Current Drain Voltage Gain LPF Attenuation THD Storage Temperature Operating Temperature Width Length Height Mass without battery 11 mm 9V 500 mW 2300 Hz 2300 Hz Neodymium 8 mA 55 mA 46 dB 26 dB 0 2 15 25 C 0 35 C 44 mm 60 mm 60 mm 75g STRING RESONANCE GENERATOR AESCHER U P A
Download Pdf Manuals
Related Search