Look, Listen & Live
Contents
1. 6 3 Accessing the favourite channels 1 Press OK to enter channel list 2 Press lt P to select the desired favourite group 3 Press V to select the favourite channel Alternatively you can press the FAV button to display the favourite list selection A 1 TROUBLESHOOTING There may be various reasons for abnormal operation of the receiver Check the receiver according to the procedures shown below If the receiver does not work properly after checking it please contact your dealer or the local Service Hotline Do NOT try to open or disassemble the receiver It may cause a dangerous situation and warrantee will be void What to do Indicator on front panel Power cable isn t connected Check connection of the receiver to the doesnt light up he wall outlet mains Hemote control doesn t Batteries exhausted or not Place new batteries work correctly inserted Check polarization of the batteries Receiver locked up Unplug the receiver and connect to the mains Externally IR eye not correct again Check if jack connector of IR extender connected is inserted correctly on rear panel entr e No Audio via digital out Digital audio amplifier not Refer to the amplifiers manual audio on TV is present setup correctly Problem No picture and or sound on V No signal or No channels found Message No signal on screen Forgotten menu lock code USB device not recognised The receiver switc2. 5 4 2 Games This menu allows you to play games Tetris Snake and Othello on this receiver 1 Select Games in Tools menu and press OK button to enter game menu 2 Press V buttons to select a desired game and press OK to enter the game Highlight Start and press OK to start the game For changing levels highlight Setup and use lt gt buttons 3 Press EXIT button to quit the game NOTE You can also press OK button to pause playing MAIN MENU 5 4 3 Load Factory Default 0 0 0 0 00 00 00 00 0 0 0 0 0 0 00 This menu allows you to reset the receiver back to factory settings clear all existed channels NOTE This option will delete all your settings and channel lists and set your receiver to factory default 1 Enter Tools menu select Load Factory Default and press OK button you are asked to input password 2 Input a correct password using the numeric buttons the default password is 0000 a confirmation window is displayed 3 Select Yes to return back to factory settings and clear all channels Select No to cancel 4 Press EXIT button to exit 5 4 4 Software Upgrade 1 Enter Tools menu select Software Upgrade and press OK button Software Upgrade menu is shown 2 Press V buttons to select Upgrade by Storage item and press OK button you are asked to input password 3 Input the correct password the default password is 0000 Software Upgrade submenu is opened
3. 3 Favourite group selection Turns the receiver On Standby Toggles between TV and RADIO mode Channel selection or value input Scroll page wise in lists YOUR RECEIVER 6 BACK Switches between the two last watched channels 7 INFO Shows the actual channel information 8 AV Menu Off Change channel to previous next Menu On Moves the cursor up down 9 lt gt Menu Off Increases decreases the volume level Menu On Change settings for specific Menus 10 OK Menu Off Displays the current channel list Menu On Activates the highlighted menu item 11 MENU Opens the main menu in menu you will get one step back 12 EXIT Exits from the menu or sub menu 13 GUIDE Shows the EPG Electronic Program Guide in TV mode 14 V V Volume up down 15 Mutes audio output of the receiver 16 P P Program up down in lists 17 SUB Shows the list of subtitle languages 18 TXT Shows teletext on OSD On Screen Display 19 AUDIO Shows the list of audio settings 20 LIST Opens the recordings list in viewing mode 21 OPT No function 22 V F sign Switches between TV and VCR mode 23 4 No function 24 44 gt gt Fast rewind Fast forward 25 Ip Performs slow motion in mpg and recording playback 26 0 Starts recording of the current broadcast a1 Starts playback of the selected file in Media Player 28 H To start Timeshift in viewing mode in Multimedia for Pause 29 Stops playback of the selected file in Media Pla
4. Operating Temperature Storage Temperature Operating Humidity Range Size W x D x H in mm Weight THOMSON cannot guarantee the playback of H100 3 98 W typ 5 00 W max R110 5 75 W typ 8 00 W max R100 1 2W H110 1 85W O 40 C 30 80 C 10 85 RH Non condensing R100 183x 131 x 42 R110 238 x 136 x 40 R100 0 69 kg R110 0 78kg external video files which have not been recorded by this device This product complies with the basic requirements and other relevant regulations of directives CE 2004 108 EEC and 73 23EEC RoHS 2002 95EEC THOMSON is a trademark of TECHNICOLOR S A used under license to STRONG Europe Subject to alterations In consequence of continuous research and development technical specifications design and appearance of products may change All product names are trademarks or registered trademarks of their respective owners THOMSON 2010 All rights reserved 08 2010 P16 80 Aug 2010 14 17 SPECIFICATIONS
5. Usage menu Press OK then numeric button to change the date and time Time Display This menu allow to control whether the time is displayed on screen or not The options are Off On 5 3 5 Timer Setting In this menu you can set a programme timer or sleep timer Programme timer Timer Number You can set 8 timers Timer Mode Off Once Daily Weekly Monthly Timer Service TV Service Radio Service Wake up Channel You can select a desired channel as wake up channel Month Date Day Press V buttons to select your desired month date and day Time Press OK to input the time with the numeric buttons Duration Press OK to input desired duration with the numeric buttons Auto Record Use to adjust ON or OFF depending if you want the timer to activate recording via USB device Quitting the programme timer a saving window appears select Yes in the confirmation window with M and press OK to save or select No to cancel P9 MAIN MENU E 14 0 Sleep Timer You can set the receiver to switch to Standby in 10 30 60 90 and 120 min automatically Additionally there is shown the value of remaining time Remains HH MM 5 3 6 OSD Setting 0 This menu allows you to change settings for Subtitle Display OSD Transparency and Load Default OSD Setting Subtitle Display set the subtitle to DVB Teletext or OFF OSD Timeout set the desired duration for banner display from 3 10 s OSD
6. 2 Channel Scan Q N Use the WY buttons to select Installation press OK to enter the menu With the V buttons to select Channel Scan and press OK to enter the menu Use the lt gt buttons to select one of two Scan Modes By Channel and By Frequency When By Channel is selected use the cursor buttons to select Scan Band and Channel No When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth Select Network Search to ON or OFF highlight Search and press OK to start scan After Channels are found they will be stored and receiver switches to the first one saved in the list 5 2 3 Antenna Setting N 5 Press MENU to enter main menu Use the V buttons to select Installation press OK to enter the menu With the V buttons select Antenna setting and press OK to enter Press the j gt buttons to change setting If On is selected the receiver will provide 5 V antenna power for active antennas Press EXIT button to exit 5 2 4 Logical channel numbering If LCN Logical Channel Number is activated and LCN signal is provided by operator then channels will be stored at operator defined order You can activate deactivate the LCN function by setting the LCN Mode to ON OFF 5 3 Setup This menu allows you to set OSD Language TV System Region and Time Timer Setting OSD Setting and Parental Lock 1 P8 Press
7. Transparency To set the OSD transparency from Off 50 96 Load Default OSD Setting To clear all OSD settings and reset to default value 5 3 7 Parental Lock This menu allows you to protect the installation menu or channels with a password and you can change the Password If you want to enter the menu you will be asked to input the password default 0000 Menu Lock Locks the installation menu You can set menu lock to ON OFF Channel Lock X OOff Manual Age 4 Age 18 New Password To change the password Confirm Password To confirm the new password 5 3 8 Auto Standby 0 0 00 0000 000 0 0 000000000000 00 0 00 This option allows you to enable or disable Auto Standby The default setting for Auto Standby is ON The receiver will switch to standby automatically when it doesn t receive commands from the remote control for three hours To avoid the automatic switch off set Auto Standby to OFF 5 4 Tools Press MENU button to enter main menu Select Tools and press OK button to enter tools menu 1 Press V buttons to highlight the desired menu and press OK button to enter 2 Press EXIT button to exit 5 4 1 Receiver Information GG This menu displays some Receiver information like Hardware Software Build Date Signature and Remote Control and our Web site www thomsonstb net 1 In Tools menu select Receiver Information and press OK button to open receiver information window 2 Press EXIT button to exit
8. V buttons to highlight desired menu and press OK button to enter the setting menus Then press W buttons to select desired item Settings can be changed by MAIN MENU pressing lt P buttons You can get better overview if press OK first Now you can select desired setting by W buttons and confirm it with OK 2 Press EXIT button to exit 5 3 1 OSD Language This menu allows you to set OSD Language 5 3 2 Subtitles preference 0 This menu allows you to set preferred Subtitles Language and select Subtitles Type betwee Normal and Hard of Hearing NOTE This option is only available if Denmark is selected in First Installation Mode 5 3 3 TV System This menu allows to setup different settings conceming your TV set Display Mode PAL NTSC AUTO Aspect Ratio Use this menu to configure the screen aspect between 4 3 PS Pan amp Scan 4 3 LB Letter Box and 16 9 Wide Screen and AUTO Video Output Switch the video output mode either to RGB or to CVBS 5 3 4 Region and Time Here you can set your region and time zone Region This menu is used for changing the region setting GMT Usage Inis menu is used for usage of GMT The options are Off User Define By Region GMT Offset This menu is valid only when selected User Define in GMT Usage menu The GMT offset range is 11 30 12 00 increasing by half hours progressively Date Time Date and Time menus are valid only when selected Off in GMT
9. and will be skipped during channel zapping in full screen mode Delete To Delete channel or all channels press button 4 with lt P select Yes in the confirmation window and press OK to save If you have done all modifications conceming channel editing press EXIT to cancel 5 1 1 2 Find o Press the 2 button to enter Find menu Use the Y lt P buttons to highlight desired letters or numbers and press OK to insert After each character the channel list will search the channel according your input and list the matched channel Press EXIT to quit Find mode Bolle u a a u o e Press the 9 button to enter Sort menu Use the V buttons to highlight desired sort way and press OK to confirm Default Sorting by searched Order from lowest to highest frequency Name A A Sorting in Alphabetical Order Name Z A Sorting in Alphabetical Order FIA First in the list will be Free To Air channels Locked First will be listed all unlocked and then the locked channels 5 1 1 4 Move gt Press the 4 button to activate the Move function The selected channel will be marked in a 4 symbol use the V buttons to move the selected channel to the desired position With lt P select Yes in the confirmation window and press OK to save 5 1 2 Radio Channel list 0 0 0 0 0 00 Basically the operation of Radio Channel List is the same as in TV Channel List only difference is
10. shielded This manual provides complete instructions for installing and using this receiver The following symbols will serve as follow WARNING Tips MENU Move to ndicates warning information ndicates any other additional important or helpful information Represents a button on the remote control Bold Character Represents a menu item within a window talic Character 1 4 Accessories 1 User Manual Remote control unit 2x Batteries AAA type 1 Infrared Extender NOTE The batteries should not be recharged disassembled electrically short circuited or be mixed or used with other types of batteries If rechargeable accumulators instead of batteries are going to be used we recommend using e g NIMH types with low self discharge to ensure long time operation of remote control 2 0 YOUR RECEIVER 2 1 PIN CODE DEFAULT 0000 2 2 Front Panel 2 3 Rear Panel ANT IN TOTV S PDIF Coaxial USB TV SCART VCR SCART IR IN O Ors GIN Fig 1 Fig 2 To connect an antenna for reception of broadcasting signal To connect a V set or to connect an extra receiver To connect your receiver to digital audio amplifier To connect an USB device n n n To connect your receiver with your TV set using a SCART cable To connect to a Video or DVD recorder To connect the IR extender 2 4 Remote Control FAV 0 TV RADIO 0 9 PG PG O eD P4 Fig
11. SHOOTING Ba a4 0 6 0 OPERATION 6 1 Changing Channels There are 4 ways of channel selection stepping through the channel list selection by number from the on screen channel list and using the electronic programme guide EPG 1 Stepping through the channel list To move through the channel list press the Y buttons on the remote control 2 Selected by number Enter the channel number directly by pressing numeric buttons and press the OK button to select desired channel 3 Selected by on screen channels list You can also select the required channel directly from on screen channel list This is displayed using the receivers main menu See chapter 5 1 1 TV Channel list in this manual for operation detail Alternatively you can call up channel list by pressing OK in viewing mode 4 Selected by EPG You can also select the required channel directly from electronic programme guide EPO This is displayed by pressing EPG button on remote control See in the below chapter of this manual for operation detail 6 2 Accessing the Electronic Program Guide EPG 1 Press EPG button to enter EPG menu 2 Press numeric button 2 to switch between channel list events schedule of the selected channel and now next events 3 In the event schedule press OK button to book the selected event press numeric button 3 to open the Detail menu for the selected event 4 Press numeric button 1 to open the Booking list menu
12. THOMSON TTR 100 Digital Terrestrial Receiver TTR 110 Digital Terrestrial Twin Tuner Receiver OOK Listen amp Live User manual www thomsonstb net Fig 1 TFHIEFERETE sO o AA re ce IN A TRADENA a or RSA TTR100 TTR110 Edo mk IN TCTV QO E n RENS THERE EE E A THOMSON IS A TRADEMARK OF TECHNICOLOR S A USED UNDER LICENSE TO STRONG EUROPE TELEVISION VCR DVD RECORDER N LIU DIGITAL TERRESTRIAL RECEIVER TTR110 C T SED UNDER LICENSE TO STRONG EUROPE TV SCART VCR SCART USB lJ J storage device THOMSON IS A TRADEMARK OF TECHNICOLOR S A USED UNDER LICENSE TO STRONG EUROPE TABLE OF CONTENTS 1 0 INSTRUCTION 1 1 Safety Instructions 1 2 Storage 1 3 Equipment Set up 1 4 Accessories 2 0 YOUR RECEIVER 2 1 PIN CODE DEFAULT 0000 2 2 Front Panel 2 3 Rear Panel 2 4 Remote Control 2 5 Installing the Batteries 2 6 Using the Remote Control 3 0 CONNECTION 3 1 Connecting to Terrestrial Antenna 3 2 Connecting to TV DVD Video Recorder and Hi Fi 3 3 Connecting a USB storage device 3 4 Connecting and using the IR extender 4 0 FIRST TIME INSTALLATION 00000 O O O O O O O Oa P 5 IS ND 5 0 MAIN MENU 5 1 Channel 5 2 Installation 5 3 Setup 5 4 lools 1 5 5 Media 1 6 0 OPERATION 14 6 1 Changing Channels 14 6 2 Accessing the Electronic Program Guid
13. Then select the correct software file and press OK to start Message will be displayed to confirm update process select Yes to confirm or No to cancel 4 Press EXIT button to exit WARNING After an update the receiver restarts automatically During this process NEVER disconnect the receiver from the main or switch power OFF This can damage your receiver and warranty will void NOTE This receiver has foreseen an over the air update function which might not be available at your local broadcast conditions For further details visit our website www thomsonstb net or contact your local Serviceline 5 5 Media The Media menu consists of following submenus Media Player Hecord Manager Removable Disk Information Record Settings Safely remove storage device and Disk Format Select Media and press OK button to enter Media menu 1 Press MENU to enter main menu Select Media and press OK to enter Media menu 2 Press V buttons to highlight desired menu and press OK button to enter 3 Press EXIT button to exit Use the two button rows in bottom of RCU for Player operation Description for usage of buttons will be displayed on screen 5 5 1 Media Player 000000000 0 This function allows you to play MPEG 2 movies Audio and Photo files from connected USB device 1 In Media menu select Media Player and press OK button to enter Media Player menu 2 Press V buttons to select a desired item and pre
14. e EPG 14 6 3 Accessing the favourite channels 14 A 1 TROUBLESHOOTING 14 A 2 SPECIFICATIONS 15 P1 Ex J 09 1 0 INSTRUCTION 1 1 Safety Instructions SS The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance Read All Instructions Before you use the product read all operation instructions For more information on accessories such as the lithium ion battery refer to the manuals provided with those products Save These Instructions Save all safety and operating instructions for future reference Heat Warnings Read carefully and follow all warning labels on the product and those described in the instructions Follow Instructions Follow all instructions provided with this product Cleaning Always unplug this product from the wall outlet before cleaning Use only a damp cloth for cleaning Never use any type of liquid or aerosol cleaner or any type of organic solvent to clean this product Attachments For your safety and to avoid damaging the product use only recommended accessories Water and Moi
15. e Fig 8 NOTE We recommend external hard disk drives with power adapter for proper recording and play back of TV programmes 3 4 Connecting and using the IR extender 1 The included IR extender allows you to place the receiver out of sight e g in a closed cabinet while still being able to control it Plug the IR extender into the IR connector on the back of the receiver Locate the extender on a position giving it direct sight to the remote control Once a suitable location is found remove the protecting foil from the adhesive tape on the back of the extender and fix it by slightly pressing it down on the surface it should be placed on 4 0 FIRST TIME INSTALLATION If you use the receiver for the first time the Easy Install menu appears Use to change settings for setup of Region OSD Language and Antenna Power and the V to select Then use V to move focus to Search and press OK to proceed with the automatic channel scan In case the Easy Install menu does not appear after switching on the receiver reset the receiver to factory settings by pressing the MENU button and selecting Load Factory Default in submenu Tools 5 0 MAIN MENU In viewing mode always press MENU to enter the Main Menu It consists of following submenus Channel Installation Setup Tools and Media 5 1 Channel 1 Use the V buttons to select Channel and press OK to enter 2 Use the V buttons to highlight the desir
16. ed item and press OK to select 3 Press EXIT to exit NOTE You can also press OK in TV mode to enter channel list P6 CONNECTION 5 1 1 TV Channel list G 0 0 0 0 0 000 000 00 0 00 1 In Channel submenu select TV Channel List with the Y buttons and press OK to enter 2 Use the lt P buttons to change channel group assumed you have already set up Favourite groups 3 With the W buttons select the channel you want to watch With OK you can watch the selected channel in full screen mode 5 1 1 1 Edit 0 0 0 o ooo 0 Use this menu to favour lock skip delete and rename channel list Press numeric button 1 to enter Edit menu To select one channel highlight it with W or press 0 to select all channels Selected channels will get marked This way of selection can be executed for each of the edit functions Favor o add selected channel or all channels to a favourite group press the 1 button Use the V to select a desired group and press OK With M select Yes in the confirmation window and press OK to save Selected channels will get marked with folder symbol Lock To Lock channel or all channels press button 2 with lt P select Yes in the confirmation window and press OK to save Selected channel s will get marked with the amp symbol Skip To Skip channel or all channels press button 3 with lt P select Yes in the confirmation window and press OK to save Selected channel s will get marked with the 5
17. foreseen port of your receiver Wait a few seconds after the sign for connected device is shown on screen then you are ready to start Timeshift or to record a broadcasted programme Timeshift Timeshift function allows you to watch a programme in time shifted mode Press II in viewing mode Then you can use lt gt to move the cursor to the desired time which you want to watch afterwards press OK to confirm In case the info banner is not shown you just need to press the INFO button to display it again Timeshift and Record To perform this action you have to press and afterwards the YELLOW button Stop Timeshift If you want to stop Timeshift press EXIT or V then a confirmation window appears Select Yes to stop Timeshift or select No to continue P12 MAIN MENU Record There are 3 different ways to record programmes Instant recording recording from EPG and recording v a timer Instant recording In viewing mode press to instantly start a record on the current channel Press RED Bl to stop recording If you press again you can adjust the duration for this record Insert the time with the numeric buttons and press OK to confirm then press EXIT to remove the message From EPG Press the EPG button to enter the programme guide than select an event and channel with the buttons described on screen Press at the desired event to program a timer for it An icon will be displayed beside the planned eve
18. hes to standby automatically Possible cause Incorrect or bad connection of cables between receiver and TV set Volume fully turned down on receiver or TV set The TV is not set to the correct input Antenna is disconnected Antenna is damaged or misaligned Out of reception area Active antenna requires antenna power Bad connection between receiver and antenna Incorrect settings in Antenna Adjustment Incorrect direction of antenna Format or size not supported Power consumption to high Auto standby function is activated and no commands were given for 3 hours A 2 SPECIFICATIONS Demodulator Demodulator Transmission mode Video Decoder Profile level Video resolution Decoding amp Video Out Aspect ratio Audio Decoder MPEG MusiCam Layer sampling rate Audio mode COFDM 16 64 QAM 2K 8K MPEG 2 MP ML 20 x 5 6 pixels PAL 720 x 480 NTSC PAL amp NTSC What to do Unplug all cables between receiver and TV set Hefer to the user manual for correct connection schedule and reconnect carefully Increase volume level press VOL button on receiver s remote control Increase volume level on TV set Switch your TV set to AV or EXT input Refer to your TV s user manual for details Check connection to antenna Check antenna Check with dealer or broadcaster Switch receivers Antenna Power ON Check connection of cable between receiver and antenna Check
19. nt If you don t want to record this event you just need to press 6 again e Manual scheduling You can set a record manually via the Timer menu For details refer to chapter 5 3 4 Timer Setting NOTE In case the available free space on the USB device is not enough recording operation of broadcast will stop Maximum available Timeshift setting is 1h Available record types TS Transport stream including teletext subtitles etc PS Program stream for playback by PC or another device With TTR100 you can record one channel while watching another within the same frequency With TTR110 you can record 2 channels from different frequencies to USB device and you can watch another programme within the same frequency of the last recording WARNING Please consider that Timeshift needs min 0 58 GB free space on the USB device and an accurate Timeshift function is depending on the speed of the used USB device 5 5 5 Safely Remove Storage Device 1 1 1 1 1 1 1 In Media menu select Safely Remove Storage Device and press OK to safely remove the USB device Then a message is displayed 5 5 6 Disk Format 1 In Media menu select Disk Format and press OK to enter this menu You will see actual used Device and Partition displayed furthermore the available Capability in GB is shown 2 Press V to select File System and use lt gt to change between different settings P13 MAIN MENU P14 TROUBLE
20. or disassemble the product could expose you to dangerous high voltage points Damage Requiring Service If you notice any of the conditions described below while using a specified AC adapter unplug it from the wall outlet and refer servicing to qualified service personnel 1 Liguid has been spilled onto the product or some other object has fallen into the product 2 The product has been exposed to water 3 he product does not operate normally despite following operating instructions Adjust only the controls described in the operating instructions ad improper adjustment of other controls could damage the product and require extensive repair word by a qualified technician 4 The product has been dropped or damaged in any way 5 he product exhibits distinct change in performance Replacement Parts When replacement parts are required mare sure that the authorized service centre uses only parts with the same characteristics as the originals as recommended by the manufacturer Unauthorized substitution of parts could result in fire electrical shock or create other hazards Safety Check Upon completion of servicing or repairs ask the service technician to perform safety checks to determine that the product is in good working order Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus Where the mains plug or all pole mains switch is used as the di
21. s proper ventilation is provided Ensure that free airflow is maintained around the receiver Protecting the Power Cord The power supply cord should be placed so it will not be walked on Never put a heavy object on the power cord or wrap it around the leg of a table or chair Keep the area around the power cord connection points at the power outlet and at the product connection free of all AC adapter or accessory power cords GENERAL PRECAUTIONS SAFETY PRECAUTIONS Lightning If a lightning storm occurs while using a specified AC adapter remove it from the wall outlet immediately To avoid damage from unexpected power surges always unplug the P2 INSTRUCTION AC adapter from the power outlet and disconnect it from the receiver when the receiver is not in use Overloading Never overload wall outlets extension cords power strips or other power connection points with too many plugs Foreign Objects Liguid Spilage To avoid personal injury caused by fire or electrical shock from contact with internal high voltage points never insert a metal object into the product Avoid using the product where there is a danger of spillage Heat Never use or store this product near any heat source such as a radiator heat register stove or any type of equipment or appliance that generates heat including stereo amplifiers Servicing Refer all servicing to qualified personnel Attempting to remove the covers
22. sconnect device the disconnect device shall remain readily operable Remote control transmits a directional infrared beam Ensure to aim the remote control directly at the infrared sensor of the unit during operation If the sensor has been covered or there is a large object between the RCU and sensor or it is exposed to direct sunlight or a strong artificial light fluorescent or strobe light the sensor may not be able to receive the remote signal In this case change the direction of the light or reposition the unit 1 2 Storage 5 5 Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture When unpacking it make sure that all the parts are included and keep the packaging away from children When transporting the receiver from one place to another or if you are returning it under warranty make sure to repack the receiver in its original packaging with its accessories Failing to comply with such packaging procedures could void your warranty P3 INSTRUCTION E lt a s 09 1 3 Equipment Set up We recommend you consult a professional installer to set up your equipment Otherwise please follow these instructions carefully e Refer to the user manual of your V and your antenna Make sure that the SCART cable and outdoor components of the antenna are in a good condition and the SCART connections are well
23. settings in menu Installation Antenna Adjustment If you re using an active antenna turn Antenna Power ON Check signal level and quality Correct direction of antenna if necessary receiver HDD device or details A 3 Letterbox 4 3 Pan amp Scan 16 9 32 44 1 48 kHz Stereo Joint Stereo Dual Mono Mono essage Scrambled Channel is scrambled Select alternative channel channel Contact local Service Hotline or send email to our Support via www thomsonstb net Use other USB device or format in this Use an external power supply with your USB Disable Auto Standby Refer to section 5 3 8 P15 SPECIFICATIONS Tuner Front End nput frequenoy range DVB T UHF amp VHF Tuner 174 230 MHz VHF and 470 862 MHz UHF oop through frequenoy range 4f 862 MHz nput signal level 82 20 dBm Memory and System Flash memory 1 MByte SDRAM 16 MBytes Multimedia Video playback MPEG 1 and MPEG 2 encoded mpg Audio playback MP3 and WMA formats Picture view JPEG format Connectors ANT IN TO TV VCR SCART S PDIF USB IR IN General Data Supply Voltage Power Consumption IEC 169 2 Female IEC Male TV SCART RGB CVBS Composite Video Audio L R coaxial output 2 0 port max 5 V 500 mA supported External infrared sensor input 220 240 V AC SMPS 50 60 Hz Power consumption in Standby
24. ss OK button to play the desired files 3 Press EXIT button to exit P11 MAIN MENU N lt a s 09 5 5 2 Record Manager This menu allows you to playback the recorded files 1 In Media menu select Record Manager and press OK to enter Record Manager menu 2 Press V to select a desired recording and press OK button to playback the desired files 3 Press EXIT to exit During the playback it is possible to perform the following actions YELLOW to pause the playback gt gt for fast forward or fast rewind during playback GREEN or I press once to perform slow motion every further press will change the slow motion speed 1 2 1 4 1 8 5 5 3 Removable Disk Information In this menu you can display information about the storage device 1 In Media menu select Removable Disk Information and press OK to enter this menu 2 Press EXIT to exit 5 5 4 Record Settings GG 0 0 0 0 0 0 0 This menu allows you to set the time for Timeshift define Record Type set Standby Mode and Record Recovery 1 In Media menu select Record Settings and press OK to enter this menu 2 Press A V to select a desired item and use lt 4 to change settings 3 Press EXIT to exit Timeshift Time min 10 20 80 40 50 60 Record Type TS PS Standby Mode ON OFF Record Recovery ON OFF 5 5 4 1 Timeshift and recording functions G CG 1 Please connect your USB device to the
25. sture Never use this product around water near a bathtub kitchen sink laundry tub wet basement swimming pool or in the rain Location lo avoid damage to the product and prevent personal injury never place this product on an unstable stand tripod bracket Follow the instructions that describe how to safely mount the product and use only the mounting devices recommended by the manufacturer Power Sources Connect this product only to the power source described on the product label If you are not sure about the type of power supply in your home consult your local power company Hefer to instruction pages for information on using the product with a battery Grounding Polarization If this product is used with a specified AC adapter the adapter may be equipped with a polarized alternating current line plug a plug with one blade wider than the other This safety feature allows the plug to fit into the power outlet only one way If you cannot insert the plug into the wall outlet pull it out reverse it and have the receptacle replaced Ventilation Slots and openings They are provided for ventilation to ensure reliable operation of the receiver and to protect it from overheating These openings must not be blocked or covered he openings should never be blocked by placing the receiver on a bed sofa rug or heat register This receiver should not be placed in a built in installation such as a book case or rack unles
26. that in Radio Channel List there is no video information so it will always display the radio logo at the right preview screen 5 1 3 Delete Favourites and Groups _ G f Q Use this menu to delete all favourite channels Select Delete All Favourites with the Y and press OK with M select Yes in the confirmation window and press OK to delete or select No to cancel P7 MAIN MENU E 14 0 5 1 4 Deleteal 0 0 0 0 0 00 Use this menu to delete all channels Select Delete All with the Y and press OK then enter the Password default 0000 In the confirmation window select Yes with lt gt and press OK to delete or select No to cancel 5 1 5 Group Rename 1 1 1 0 In this menu you can change favourite group name Use the W buttons to select Group Rename and press OK to enter With the Y buttons select a group and press OK 2 At the appearing Keyboard use the Y lt P buttons to highlight desired letters or 3 numbers and press OK to insert After you entered desired group name highlight OK at the keyboard to confirm Press EXIT button to cancel the group rename 5 2 Installation 5 2 1 Auto Scan 1 2 3 Use the V buttons to select Installation press OK button to enter menu With the WV buttons select Auto Scan press OK to enter the menu Press the lt d gt buttons to change Scan mode and use the V to highlight Search press OK to start auto scan 5 2
27. yer 30 RED For Teletext functions Different functions in the specific menus 31 GREEN For Teletext functions Different functions in the specific menus 32 YELLOW For Teletext functions In viewing mode freeze picture Different functions in the specific menus 33 BLUE For Teletext functions Different functions in the specific menus 2 5 Installing the Batteries Fig 4 Hemove the battery cover from the remote control and put 2XAAA size batteries inside the compartment The diagram inside the battery compartment shows the correct way to install the batteries 3 Close the cover 1 Open the cover 2 Install batteries NOTE The batteries should not be recharged disassembled electrically short circuited be mixed or used with other types of batteries 2 6 Using the Remote Control Fig 5 To use the remote control point it towards the front of the digital receiver The remote control has a range of up to metres from the receiver at an angle of up to 60 degrees NOTE The remote control will not operate if its path is blocked P5 YOUR RECEIVER Ex J 09 3 0 CONNECTION 3 1 Connecting to Terrestrial Antenna 1 To receive the broadcast signal the terrestrial antenna cable should be connected to the ANT IN connector at the back of the receiver TTR100 Fig 6 TTR110 Fig 7 3 2 Connecting to TV DVD Video Recorder and Hi Fi TTR100 Fig 6 TTR110 Fig 7 3 3 Connecting a USB storage devic
Download Pdf Manuals
Related Search