Home

5 NVMS-5000 Client

1. Create Modify Delete Channel Group Group Name group 1 Limited to 1 60 Characters My Select channel group to modify or delete The modification includes Dwell Time 5second de hannel addition or channel removal in the channel group TSS cese crane soue DD y Moai E oeer Device Name Channel Name Channel NO 2 Select a channel group and click Modify button I Create Channel Group Q ra Modify gt E Delete a Device Name Channel Name Channel NO 4 group 1 0 3 Select Add or remove channels in the channel group to pop up the following left window Select the channel in area 2 and then click icon to add the channel to group Select the channel in area 1 and click icon to remove the channel from the group Device Name Channel Name Chann 4 group 1 3 office DEVICEO1 office DEVICEO2 office DEVICE03 Modify channel Group Q Select item to change Change the channel group name 3 Aaa Change the dwell time Add or remove channels in the channel group Manage other channel group information Channel Name 4 Office 13 v 4 Click OK button to save settings If you want to delete the created group please select this group and click Delete button to delete Having configured the channel groups you can click Channel group on the left menu list of TV Wall Client to see these group 5 3 4 2 Scheduled Task Configuration Enter into TV Wall Client
2. Configuration Panel Home Device and Server User Account Account and Permission Zab Create Account Create User Group Modify or Delete Account System and Security a e Permission q a System and Security interface includes system backup and restoration Modify User Permission Pel Contig Client Configuration Panel Home Backup or restore settings Backup System Config Restore the system configuration data Device and Server Gf Account and Permission System and Security 4 3 Device Settings Create area and add or delete device 4 3 1 Create area In the Configuration Panel Home enter into the device and server configuration interface by clicking Device and Server Then click Device to enter into the device configuration interface 17 won Device m Create Area Create Device Modify And Delete Device 73 Contig Client e 5 Configuration Panel Home Create Modify and Delete Device Modify or Delete Media Q Please select item from the list to change or delete Server Modify or Delete St iN tae or Delete Storage C Create Area El Add Device 7 Modify ff Delete Name Type Channe Sensor Count Alarm Out C IP or Dom Port Media Server ID Modify or Delete Schedule Trigger Setup Modify or Delete Account Modify User Permission Change the E Map Server Information To pop up an area creation window click Cre
3. ELE 1G m fa Es UaK PHL Start Time 3 05 25 FM Sensor Record Yi Motion Record Schedule R cord Manual Acard 4 lila s CAMERAOL a CAMERADZ oo CAMERAD3 a CAMERADA CAMERADS sj CAMERADS mb CAMERAO aP CAMERADS e CAMERADS a CAMERALO CAMERAII ar CAMERAL al CAMERAS i CAMERA aj CAMERALS a CAMERALG 1E prac gt B 1 4 fs W oupu The cuert configuration file new file Ure Maer CPL 5 Mma E 2139 07 08 LSet 5 3 4 Setup In the TV Wall Client you can set up channel group and import and export settings Please enter into TV Wall Client and click Setup button to display the following window We TV wall configuration TV wall Virtual Matrix Create Channel Group Modify or Delete Channel Group Scheduled task Configuration Create modify or delete a scheduled task configuration Import or export setting Import TV wall configuration Export TV wall configuration 5 3 4 1 Create or Delete Group Dwell Scheme Enter into TV Wall Client gt Setup interface Click Virtual Matrix button to pop up a window as shown below Channel group setting steps 1 Click Create Channel Group button to create a channel group Input the channel group name select dwell time and then click Create Channel Group button as shown below 68 BRE a manual Create Channel Group We TV wall configuration Q input channel group name and dwell time interval
4. yg Apache HTTP Server 2 2 Installation Wizard de Installation Wizard Completed The Installation Wizard has successfully installed Apache HTTP Server 2 2 22 Click Finish to exit the wizard 12 iy 5000 3 2 Uninstall the software If the new version needs to be installed or there is no necessary to use this software you can uninstall this software We strongly recommend that you back up your configuration data before you install the new version of NVMS 5000 The methods of uninstallation are as follows Click Start gt Programs gt NVMS 5000 gt Uninstall to pop up the following wizard Click Yes to confirm NVMS 5000 InstallShield Wizard This operation will delete MWYMS 5000 From your computer Continue Then click Finish button to completely uninstall this software NVMS 5000 InstallShield Wizard Uninstall Complete InstallShield Wizard has finished If you have already installed the Apache HTTP Server the configuration tool can still call the Apache installation files You can select Repair or Uninstall or close this interface to continue 4 System Configuration 4 1 Authentication Server Authentication server provides a uniform authentication for all devices servers and clients to access Therefore the authentication server must be started first and continuously Double click MEE icon Cor click Start gt Programs gt NVMS 5000 gt Server gt
5. Save Output Config Tt f Save P Cancel File Name corridor If this output scheme is needed double click the file name coridor and then click MALAS button The images FAX Rename Clear All Click Rename to modify the file name Click Delete to delete this scheme Click Clear All to clear all output schemes will display on the TV Wall Server Right click this output scheme to pop up a dropdown list ee 5 5 If you change the channels or channel groups of the current output scheme clicking button can save the modified scheme on the output scheme area Note Each time you change channels or channel groups please click a Update f button to display the images set currently on the TV Wall 5 3 3 Playback Click Playback tab to enter playback setting interface Here it can only playback the record saved in the device HDD s To playback select the date and event like sensor record motion record etc you want to playback and then drag the channel into the output screen which will display playback xxx as shown below After that you will see the playback images on the TV Wall Please don t click Update button on the tool bar after dragging the channel into output screen or the playback images will not display 67 Y vn User manual E TV Wall Client E Save E Saveas Update SE Setup 7 Gael a 10 ii ETRE 14 115 16 17 18 19 20
6. CAM ERAOZ CAME RAO2 5 1 5 Multi screen Display In the interface of live preview click button to plus a tab of live preview Drag any tab of live preview or right click the tab of live preview to select Float to pop up an independent live preview interface as below Multi screen to display can be realized by dragging the independent interface to other screen graphics card should support multi screen output at the same time 55 Y vu o manual MAC Monitor Client Li Correa Fane Payback Basic dating Lira Preire A gt 4 y Me Monitor Client T T 7 7 1 i i F 4 T T T T T 7 a alar ot BB AAA p ai ms 5 1 6 Playback In the interface of control panel click Playback to enter the interface You can play back the record files stored in the HDD of device and storage server gt MC Monitor Client Control Panel A gt Basic Setting CAMERAD2 Sun mos Tue vad Thu Fri Sat Snap Open Voice Download By Time Close the preview Full Screen CAMERAO3 56 Wi User manual Area Descriptions Area Description Area Description Playback Area Record time Area 4 ResourcesArea Time search or type search Area aS Buttons Description of Area 2 Icon Description Screen mode 1 4 9 16 25 channels are optional aa Close playback of all channels mites SSCS Play ee Stop Playback by single frame When playback click button first
7. E Click to hide the window Mo E Click to zoom in out the window Click to extend or shrink the window eg Extend or shrink the list of alarm information list EE Click to exit the window 5 1 2 Group and Scheme Setting Oo Channel Group Setting In monitor client contiol pand atete click Virtual Matrix to pop up the following window Me Monitor Client Control Panel Live preview Cernit Mame Channel Mare Click Create Channel Group to create a channel group a N i a Input channel group name and dwell time interval Group Name 1 Limited to 1 60 Characters Dwell Time Interval Al 10 p CAM1 16 p CAM1 s dvr p CAMERA01 mp CAMERAO2 OK Cancel After you create a channel group choose this channel group and click Change button 49 Y us E ser manual F Group 1 c y p ZE Create Channel Group A Change i Delete Device Name Channel Name Group 1 0 Then click Add or remove channel or channel of channel group NC Add or remove channel of channel group aA 1 Group 1 IPC p 1PC_9421M m dvr dvr_CAMERAO1 CAMERA04 dvr_CAMERAO2 CAMERAO6 p dvr_CAMERAO3 p CAMERAO7 dvr_CAMERAOS CAMERAOS CAMERAOS CAMERA10 p CAMERA11 CAMERA12 CAMERA13 p CAMERA14 CAMERA15 p CAMERA16 OK Cancel Check cameras on the left and click button to add the selected cameras to the group on the right Check cameras o
8. Playback Viewer a CAMERA11 Backup CAMERA12 Channel Rights a CAMERA13 Live preview y CAMERA14 Live record ap CAMERA15 A PTZ Control D CAMERAJO lv Playback Backup 4 5 or D a AS o S cance Steps gt Click Add Resource button to pop up a dialog box Select the area device or channel you want to add Finally click OK to add a new permission list gt Drag the scroll bar down to set TV Wall Server permission You just need to select the relevant TV Wall Server and then click OK to save the setting You must have already added TV Wall Servers before permission i of MX SENSE lt gt Drag the scroll bar down to set E map server permission You must have already added the map and started the E map server otherwise you cannot set the E map permission Here if you have added the map and started the E map server you just need to check the relevant map and click OK to save the setting Additionally you can also click Modify button to change user s permission name password user group and so on Note The permission of administer cannot be modified 4 11 System and Security Return to Configuration Panel Home and click System and Security to backup or restore system configuration 45 LEP manual The user must register in this software for using this function If you don t register you cannot backup or restore System and
9. You need to connect monitor devices such as IPC DVR and DVS to internet through hubs or routers accessed by Cat5 or CatSe cables less than 100 meters or optical fiber Run monitor client through local PC to configure the local video monitor monitor devices and so on 1 2 3 Background Monitor Background monitors include TV Wall Client Config Client and Monitor Client You can setup the real time image of display devices these display devices including TV Wall decoding images to show on the TV Wall through video decoder digital display screen and so on Run config client through local PC to configure and manage the whole system Run monitor client through local PC to view playback and remotely configure and manage the real time video of front end monitor devices 1 2 4 Control Center In the control center configure servers including authentication server media transfer server storage server alarm server to realize various service such as device authentication including Web video transmission image storage alarm handling etc In the control center add IP SAN storage array to realize centralized storage In the control center connect servers and IP SAN storage array to internet through hub We take the following IP addresses for example in this manual Please set up IP addresses in accordance with the actual situation VARI User manual NO Server Function IP address l Authenticate devices including Web
10. 192 168 6 67 Alarm handling 192 168 6 70 Emap application 192 168 6 71 Note If servers are installed in the same PC these servers shall have the same IP address 1 3 NVMS 5000 Version Introduction Version Average signal access Max signal access NVMS 5000 v1 2 300 400 channels video signals 30000 ch video signals 2 Configuration Requirement 2 1 Software and Hardware Configuration Requirement 2 1 1 S amp H Config Requirement for Contorl Center Recommendation NVMS 5000 Recommendation for hardware components configuration for software Number configuration Authentication CPU XEON 3430 2 40GHz Core It is up to the video format and server 4 8M the number of channel Windows server ae Media server Main board Intel 3420 2003 32 bit previewing simultaneously for 1 Storage server Memory 4GB DDR3 ECC media server and storage server Windows server a Alarm Server HDD 500GB SATA 2008 30bit Authentication Server 1 1 E map Server NIC 2x1000M More NICs need if Alarm Server 1 more networks access E Map Server 1 It is up to the stream channel and 2 HDD O Capacity 500GB 1TB 2TB l time of the storage video IP SAN It is up to the number of the 3 l Oo Supports 12 16 24 SATAs optional HDD 2 1 2 S amp H Config Requirement for Background Monitor No NVMS 5000 Recommendation for hardware Recommendation for Numb umber components configuration software configuration Intel Core 13 530 double core Wi
11. Install Apache HTTP Server 2 2 programs and shortcuts for for All Users on Port 80 as a Service Recommended 5 only for the Current User on Port 8080 when started Manually InstallShield eee ee eme 13 Select the installation type Options Typical Custom and Custom Then click Change to assign the path to install and click to continue 11 o PV rm 18 Apache HTTP Server 2 2 Installation Wizard Custom Setup Select the program features you want installed Click on an icon in the list below to change how a feature is installed Feature Description The Apache HTTP Web Server Apache Runtime Version 2 2 x Build Headers and Libraries APR Iconv Code Pages E ssl Binaries aed OpenSSL Runtime This feature requires OKB on E Apache Documentation your hard drive It has 3 of3 2 Apache Service Taskbar Icon aro a your hard drive Install to F Program Files Apache Software Foundation Apache2 21 Change Al InstallShield 14 Click to install the program 8 Apache HTTP Server 2 2 Installation Wizard Ready to Install the Program The wizard is ready to begin installation Click Install to begin the installation If you want to review or change any of your installation settings cick Back Click Cancel to exit the wizard InstallShield 15 Click to complete the installation wizard of Apache HTTP Server
12. Modify User Permission Q Select item to modify from list TV Wall Name Input the name and password of the TV Wall Server and then click OK button 73 Contig Client 4 admin Create TV Wall You can self define the Q Please Input TV Wall name and password name and password Name Limited to 1 60 Characters Password Limited to 60 Characters Confirm Password WII TE As for the created TV Wall Server you can click Modify button to change its name and password and click Delete button to delete the TV Wall Server 4 8 2 Install Video Decoding Card In order to decode video and display video on the wall user must install video decoding card in the computer The steps are as follows Step 1 Open the back cover of the PC and insert the video decoding card into the PCI port of the PC as shown below example as shown below The port will display as shown in the following picture after you install the video decoding card 38 BE a manual Step 3 Right click My computer and then click Manage gt Device Manager to unfold sound video and game controllers to check whether there are decoding cards listed or whether the decoding card displays well If the number of decoding cards is wrong or there is question mark please re install the driver software 4 8 3 Start TV Wall Server WSs Double click icon or click Start gt Programs
13. gt Setup gt Scheduled Task interface to create tasks You can see the designated channel image by the configuration of task in designated time Create a new scheduled task for the TV Wall server TV Wall Q Please enter the information of the scheduled task Task Limited to 1 60 Characters Trigger mode and time Start Time 11 07 05 AM 3 O Everyday O Every Week Output target Input channel Selected Selected A 4 68No 0_Output0d O Channel OChannel group Output screen 0 4 Othe first level gt Othe second level al We TV wall configuration Create change or delete tasks of the TV Wall Server Q Create task or select the existing task from the list to modify or delete 2 Modify IF Delete Enable Create Channel Group Enabled Output screen Trigger Trigger ti Create a task 4 TV Wall 0 Note Before you create a task you must start your TV Wall Server The steps of task creation 69 E Jser manual Step 1 In the Scheduled task interface click Create Task button to display the dialog box as shown above on the right Step 2 Input the task name Step 3 Select the trigger mode and time Step 4 Select the output target and channel or channel group Step 5 Checkmark Enable and click Create a task 5 3 4 3 Backup Restore Settings of TV Wall Client Enter into TV Wall Client gt Setup
14. gt NVMS 5000 gt Server gt TV Wall Server to run the TV Wall Server A login window will pop up as shown below Please input the name and password of the TV Wall Server and then click Setup button to input the relevant information about Authentication Server Please refer to Chapter 4 2 Config Client Finally click Login button to enter into TV Wall Server interface C Auto Login C Auto Login Startup Server Name TV Wall v Server Name TV Wall v Password e Password e Authentication Authentication Ii authentication server vw CI Startup Login YA After starting TV Wall RE it is a full black screen EEEE click the screen to see the following list Click About TVWall Sever to see the version information of TV Wall Server Click Server start and maintenance configuration to set the login method next time Click Exit TV Wall Server or press ESC button to exit the TV Wall Server About Ty yall Server Server start and maintenance configuration Exit Ty Wall Server 4 9 E Map Server The E Map server stores the E map information of the system The clients of the system landing anywhere can share the same E map 4 9 1 E Map Server Setting There is only one E map server in NVMS 5000 system and it has been already created named EMapServer The default password is null When logging into the EMap server no password needs to input Ent
15. AAPP o 39 AS A siphoned spun sec oo o e 40 ZA sO El emer a eee ere ae ee ee eee 40 4 9 3 Modify Map Add Hotspot and HoOtzON68 oooooooccccoconcncncnnnnonononnnnnnnnnnnnononononnononnnno nn nono nn nnnno nono nnnnnnnnnnnnnnos 41 a CC OU nd EMS Oro atole 43 A e 43 A ONZA US G 10 10 emer ee tee E eee eee eae 44 410 Mods Sees Si SO etorri 44 A Ml SV Stet ANC OCCULILY ica 45 A Eg ee ree eer rer 46 MORO ia 46 E T A eo o oo ose 47 NA Siroco AiG SOMC IMG UNG OI OREA ee Eo O o EE OE 49 sn A 50 A A O OOO oo 54 lo Mule crec ANA ias 55 aka o eee EE OA i Ao e 56 OL Play Daconte 58 21 02 Take Snapshot When Pla back corona os 58 a Mes Mpand Backup RECODO ne ee 58 LLO S Dovnload RCC ONG enano nania ooo ataoibia 59 ILOA Synchronized Pla Dackes EE 59 Di A E E A E A E E E E 59 SLO E NE e oo io e 60 FEST E Te e oO o 61 A A ee ee eee 62 A e Eo hese A 63 5 2 1 Operating Environment of Web Client ooooccccnnnnnnnnnnnnnnnonononononnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnos 63 nn Ei E oo O e 63 EV WNE enaa 64 TALEE A E e en en ee ee ee 64 ALLEY VV Galle UU ENN ica 66 EREA ey ONC COPPER Pe oO O E O E O E A 67 A e o o A ee ee 68 5 5 tl Create or Delete Group Dwell SCC Ie sesomropiaoiaoiaai 68 3 34 2 Scheduled Task Conni g ral Oi IPAPER RCA OCO N00UXe P anaoa 69 5 3 4 3 Backup amp Restore Settings of TV Wall CGM wicccccniventsentvensvensventssntuenevendvendssetvensvenGounssentvenssensens 70 A
16. Area Create Device Modify And Delete Device Create Media Server Modify or Delete Media Server Modify or Delete Storage Server Trigger Setup Modify or Delete TV Wall Account and Permission Create Account Modify or Delete Account Modify User Permission System and Security Backup System Config Restore the system configuration data Device and Server interface includes adding modifying and deleting device Media Server Storage Server TV 16 A rm Wall and Schedule as well as modifying Alarm Server and E Map Server 73 Config Client R d admin Configuration Panel Home Device Create Area Create Device Modify And Delete Device e Device and Server ly A Account and Permission Media Server Create Media Server Modify or Delete Media Server System and Security Storage Server Create Storage Server Modify or Delete Storage Server Record Schedule Setting Partition Group Setting of Storage Server Add Channel To Storage Server Alarm Server Modify Alarm Server Trigger Setup Motion Schedule Setting P 4 Sensor Schedule Setting Schedule 30 Create Schedule Modify or Delete Schedule Set Schedule for All Applications TVWall Server Create TV Wall Modify or Delete TV Wall EMap Server Change the E Map Server Information Account and Permission interface includes creating modifying or deleting account and user group as well as user permission 73 Config Client
17. Click Mel and a buttons to adjust focus iris and zoom Serial Preset Point Name 1 preset00 1 MES Select a preset point and click ESS to operate this preset point or double click the preset point to operate it 2 eba 3 preset003 7 7 preset004 Click Cruise button to list the cruises Select a cruise and click Co button to cruise click LJ button to stop 5 preset006 cruising Fi preset007 PTZ can also support track auto scan wiper and light function 5 1 4 Alarm Preview 54 Oo Alarm Preview Setting In the control panel click Alarm Page Settings under Live Preview to pop up the window 1 Alarm preview will pop up automatically when alarm is triggered 1f checking Automatic Pop up Alarm Page Full Screen Display DIS 2 Alarm preview will pop up automatically in full screen Alarm Preview Settings when alarm if triggered if checking Full Screen Display a E A When Popping Up 3 Choose a display monitor from the Full Screen Display JE drop down menu The alarm image will display on the designated monitor when alarm is triggered 4 Choose the number of screen O Alarm Preview In the Config Client set up alarm trigger and alarm schedule for alarm server The monitor client will pop up the relevant image on an alarm In the monitor client click Alarm Preview to pop up the following window Du Y MC Monitor Client pr CAMERAO2 CAME RAO
18. Config Client 1 the default Emap server port Server Name Password EM apServer Authentication Mi authentication server Username admin Ji C Auto Login C Startup 192 168 6 67 6003 192 168 6 67 Login Time 3 20 2012 5 34 26 PM 3 20 2012 5 34 27 PM 2 Name EMapServer 4 9 3 Create E Map Port 6039 Start Time 2012 03 20 17 34 24 Run time Odays 0 25 42 After the startup of the EMap server return to the Configuration Panel Home gt Device and Server gt EMap server interface and click Create map button 40 Create a map for the E Map Server Please select the map you want to add from the local disk enter a name and choose the parent map for this new map map name showing in the client Parent Map Map File MET Input the map name click Browse button to find the map you want to add double click the map file and click OK to save settings 4 9 3 Modify Map amp Add Hotspot and Hotzone Enter into the Configuration Panel Home gt Device and Server gt EMap server interface and click Modify Map and Add HotSpot and HotZone button amp Contig Client y admin F o Create Map 2 Modify Name Delete T ada HotZone EF ada HotSpot ig Save Q Zoom Out a 3NanShan En a as a BX Office Office fs Conference coment MT Re rom LLL Corridor Conference aa arketin nian Comme
19. Dragging device would change their media server Go aa 4 4 3 Start Media Server Double click MEER icon or click Start gt Programs gt NVMS 5000 gt Server gt Media Server to start the media server A login window will pop up as follows Input the created media server name and password Then click Setup button to input the authentication information please refer to Chapter 4 2 Config Client After that please click Login to enter into the media server interface Authentication TJ Auto Login Startup Authentication Ii authentication server v C Auto Login CI Startup Server Name media server ka Server Name media server v Password e Password TITTY togn eD namo a 23 Jser manual You can aslo check Auto Login or Startup button to set the logging method next time Auto login means the server will auto login and there is not neccessry to input in the filed of server name password and authenticaiton when you start this server Startup means the server will auto start when you start you PC The media server interface 1s as shown below MS Media Server D AlarmServer 2 4 Device 2 4 Alarm Server 1 27 admin 210 21 229 141 5001 3 20 2012 5 43 09 PM Description This server distributes media data and status of device the default media server port the default auto report port A v Service St
20. Group 153 Delete Driver letter File System Partition Size FreeSpace Status Partition Group Name Driver letter Channel C F NTFS 78 16 63 4G Uninitialized 4 storage server 2 22Default Partition C E fi gt Partition group 2 O 7 3 Add or Remove Channel from Partition Group Select partition group and click Add or Remove Channel from Partition Group button T Mg Create Partition Group g Modify Partition Group f Delete gajt Add or Remove Channel From Partition Group Partition Group Name Driver letter Channel 4 storage server 2 22Default Partition C 18 17 ate d EE Partition group 2 Add channel to partition group Select channels of area 2 and click button to add Then click OK to save settings Remove channel from partition group Select channels of area 1 and click button to remove Then click OK to save settings 30 MR oo r manual 73 Config Client Configuration Panel Home Add channel to the storage server storage server Modify or Delete Schedule Note Only the channels assigned to a media server can be assigned to the storage server so you ante Schedule can only see the channels assigned to a media server from the following list Channel Name Channel 2 O the first level Channel Cou JO the second level Chann Area 2 Create Area Device Name Channel Name Char Modify And Delete Devic
21. SIE OR A o E o II 22 O a A NERO ee NTRA DENAREN OEE RENDA ERENER EAE a AAEREN eitea 22 44 2 Modify Device of the Media Servet ani 23 a oe E E rel EAS senatenecteenene sen ameneete omens seoaheneetseanene spb amenee ea mene se amenge nanan ssoanenens 23 d S Stornace Server SeN APO oo reesei unas eae nerseneenas tate necieceeeeaptamanacueceeeeaetemenecuecesseasteme nenuecedeeapecmeneneeceeneces 24 nee 24 43 200 Channels to Storage SSL VEN iii iii 25 SA AAA o daaa dekadasida adaa dikoa 26 ASA Stail OLAS SEVE PP a 27 4 5 5 Partition Group Settings of Storage Server eeeessssssssssssssrrrrrrrreesssssssssssssrerrrrreresssssssesseerrereresessssse 29 EE A A o A T E e o PE O A A 31 o A anenencoaneneeseeneneos mane neeenaenensoanenee se anenensmaneneeseenebensoanengeenenenensoonenes 31 4 6 2 Alarm Tire ger Settings aiscicte deus danna devorados 32 4 6 3 Motion Alarm Schedule Settid8 oooooooncnnnnnonooooonoooooonn nono nnnnnnonnnnnnnno nono non nono nono nn nro nono nn non nn nn nn non nn n nn nn nnnnnnnnnnss 33 4 04 Sensor Alarm Schedale Settini datada diia 34 A a E o we T T 34 is A ol O cet ein o s gee sion das mes easmenien asemenes 35 A ee 35 Ae NOU OE LC LC Ue once 36 4 7 3 Set Shedule for All Applications ooo cesueeoaceeuosesceenebosceenotesoess 37 O BR oer manual AN E oo EA 37 A RA E ne 37 AS 2 Install Video Decoding Cardin 38 ee UI I ANC E a ace etc ase a E e E e ren ercneparatorere 39 A ER E OU o 0 E O e o o e 39 AB
22. Server Modify or Delete Storage ver Username Accou Telephone EMail Locked Limited Account des Trigger Setup 4 Users outside the group 2 IBA E Map Server j admin Admini eee el No NO y Information userl1 Admini No No Input username password and select account type Then click Create Account to add a user 43 73 Contig Client 4 admin Create Account Q Create a new account and setup its basic information Username and password are required New Username Limited to 1 60 Characters Password Limited to 60 Characters Confirm Password Account type Administrator O Operator Choose an account ____ em type group v O MAC binding If locked this user will be MAC 00 00 0C unable to access the Lock Account gt system EMail Telephone Account description Limited to 256 Characters WE 4 10 2 Add User Group Enter into User account interface to click Add User Group button Input the user group name and click Create User Group 73 Config Client ES Configuration Panel Home Create modify delete user or user group z Modify And Delete Device Q Select item to modify or delete from the list Modify or Delete Media Server Modify or Delete Storage rer Username Accou Telephone EMail Locked Limited Account des Trigger Setup 4 Users outside the group 2 Change th
23. delete schedule and set schedule for all applications Create Schedule Modify or Delete Schedule Set Schedule for All Applications 4 7 1 Create Schedule Enter into the Schedule configuration interface There is a default schedule 7x24 You can also create other schedules 73 Config Client Configuration Panel Home Create change or delete schedule Modify And Delete Device Modify or Delete Media Server Q Please select the schedule you want to modify or delete from the list f Modify fP Delete Modify or Delete Storage Server Change the E Map Server Information gt You can self define the schedule name and manually set time or set time through Select All or Reverse Select button to complete the schedule time and date setting Then click Create Schedule button to save all settings 35 Config Client E SEES Ee nalia Create Schedule self define Q Please enter a namgant set the time period for the new schedule 1 a Scheduling schemenamel7x10 UU Manual Input SelectAll Reverse Select Clear All sun o er ole ae A d ael 19 434 155 16 api 87 O 20 pa ee A 1 ni a 11 12 13 04 06 10 27 ManualInput SelectAll Reverse Select Clear All E MERE SE IEEE IEE IE IE IE ESE IE IE _ m T A BREMEN Varvaly ict the te seclon gt EEE AE SCRE RE REDE SE SE DE Manual Input SelectAll Reverse Select Clear All eee o EMP 5 14 I7 IB 39 20 21 22 23
24. has been successfully installed It is highly recommended that you download and install the latest service packs and security updates for this product For more information visit the following Web site Product Support Center 8 Return to the installation interface of NVMS 5000 to review settings Then click Next button 9 Select Create shortcut in desktop as needed and then click Finish button Now the NVMS 5000 installation is completed NYMS 5000 InstallShield Wizard InstallShield Wizard Complete The InstallShield Wizard has successtully installed NWMS 5000 Click Finish to exit the wizard iv Create shortcut in desktop gt y 10 After you finish installing NVMS 5000 a wizard for Apache HTTP Server pops up If you want to access web client please click Next button to install Welcome to the Installation Wizard for Apache HTTP Server 2 2 22 The Installation Wizard will install Apache HTTP Server 2 2 22 on your computer To continue cick Next WARNING This program is protected by copyright law and international treaties 10 Select I accept the terms in the license agreement and click Next to continue 10 fs Apache HTTP Server 2 2 Installation Wizard Please read the following license agreement carefully Apache License Version 2 0 January 2004 lt httpe Mwww apache orq licenses gt TERMS AND CONDITIONS FOR USE REPRODUCTION AND DISTRIBUTION 1 D
25. the window to display the menu toolbar then click icon to close preview of this channel of OOM ESO gt gt Close Preview by Right clicking Choose Close Preview by right clicking the display window to close preview of this channel gt Close All Preview Click S icon on the main menu toolbar to close all the LAHENEEERE CIS windows eo Group Dwell Preview Click Channel Group button on the lower left corner MC Monitor Client Control Panel CAMERAO Channel Name Device of Channe 01 07 2013 06 57 08 CAMERAO CAMERAD2 01 07 2013 06 57 08 Es Channel group 18 25 w a SN EB Choose the group and the window and then double click this group to view the group dwell image Choose the scheme and double click this scheme to view the group dwell scheme The system will display the screen mode automatically 52 gt Stop Channel Group or Group Dwell Scheme Click icon to close all the windows for stopping channel group or scheme dwell Preview Control gt Full Screen Snap Open Manual Recording Start Talk Click icon on the display window or right click to choose Full ee es Screen to view 1n full screen 2 CIF 6fps Camera Configuration Enable Audio Right click to choose Exit Full Screen to exit full screen preview Close Preview Full screen gt Single Channel in Full Screen Double click the selected window to view in full screen Double c
26. 0 D perrera al rilirala l OK Cancel i Set the play time of the channel 13 20 00 alae bid A l et PEPE brtiti titi o Playback by Searching Event Click button to display the event list Double click an event to play this event record Note and buttons on the timeline are used to expand and narrow down the time bar so you can choose a more accurate playback time What s more you may also change playback speed by dragging 5 1 6 2 Take Snapshot When Playback Click o button on the playing window to capture pictures A message prompt will pop up after snapping 5 1 6 3 Clip and Backup Record When playing back record file click button to set the start time click ES button to set the end time Then click kA button to download the video files within the configured time Note The default path is C backup 58 A E vse manual 5 1 6 4 Download Record o Download Record by Time Search Right click the image in the playback interface to pop up a drop down list as shown on the left hand Click Download By Time to pop up a window as follows Download record by time Te ap Now Device name End Tima 2013 03 20 25959 p New Cievicoe2_4411 Anu fal p Mew CL EH Mew Devices DEVIC ap Now Device JE WL Select record channel start time and end time checkmark event type and then click Record Search button to search record information After the information is s
27. 1 A PP manual Area 7 Create Area Media Server Create Media Server Type IPCAMERA o Dl Auto report IPCAMERA o eee DVR Limited to 1 60 Characters Stream mode Other Device Type 1 Other Device Type 2 IP i i i O Use domain 4 4 Media Server Settings Media server is in charge of the video signal receival of the front end devices and transfers the signal to the client to preview or to the storage server to record The client or storage server sends the command of viewing the video of the front end devices that is also transferred by the media server to the front end devices 4 4 1 Create Media Server Before creating devices please create media server first In the configuration panel home click Device and Server gt click Media Server to enter into the configuration interface of the media server Next click Add Media Server button Create Media Server Modify or Delete Media Server c Config Client E gt Configuration Panel Home Create Modify and Delete Server Modify or Delete Schedule Q Add Modify and Delete Media Server Modify And Delete Device CUE Add Media Server Y 7 Modify Delete E Modify or Delete Storage S a i MN a Ge d471848461d Device Name ID Type Chann Media Server rigger Setup D media server f Modify or Delete Account A Modify User Permission Imedia 8 Wadia Servar A Please input the server name and password and th
28. 2 2 Start IE Client Before starting IE client Authentication Server Media Server and Storage server must be started first Then Open Apache You can check it from the lower right corner of the PC as shown below Stop et Restart Login Input the IP address or domain name of Authentication Server and the web server port for example http 192 168 6 67 80088 In this example IP address is 192 168 6 67 The default web server port is 8088 to enter into IE Client Then input the user name and password you created in Account and Permission interface Username Password Language English ll Logm After you log in a downloading Active X control information will pop up Please install this Active X control After that you will see the live interface as shown below 63 NVMS 5000 r manual 1AF veb Monitor Playback Channel fist PTZ y E ERN Ti 2013 07 09 06 46 34 ese RESINAS 2 Chang password Logout Live preview wi 21382 139a 140a s 42a Ea 146a 149a 5 2150a 5 a153a 154a 155a m156a 157a a158a 201 5196 194 193 192 ar 190 189 HK241 180 lt Collapse all Expand all i B dgga Zee m A a E Click Playback tab to see the playback interface ven Monitor Live preview Playback o Jul w 2013 v 0153 07 09 07 08 TI Su Mo Tu We Th i 2 E 4 MH 10 13 14 15 16 1 7 18 19 20 ED PE
29. 24 13 14 1 A 2122 23 24 A ok J Manual Input SelectAll Reverse Select Clear All u o U Ml 222 2324 Se A O ET E TD S T NR I ManualInput SelectAll Reverse Select Clear All Fri 0 2 3 5 6 i 8 9 O ea e A m IE 1S 20 2 2 2a 24 at 1 Manual Input SelectAll Reverse Select Clear All 1 Th S 0 2 3 4 5 6 i 8 9 leat ale A allsy eg all al de ee E ManualInput SelectAll Reverse Select Clear All Loc Cesa 1 Manually input the start time and end time of the whole week 2 Manually input the start time and end time of one day 4 7 2 Modify or Delete Schedule 1 Modify Schedule Enter into the schedule configuration interface Select the schedule and click Modify button as shown below Modify Schedule Info Q Select item to change _ ip Add Schedule 7 Modiy f Delete Aad Schedule E Delais Modify Schedule Name f2517x2 Modify Schedule Time 24 View or change other schedules Select Modify Schedule Name to help you modify the schedule name Select Modify Schedule Time to help you modify the schedule time After clicking Modify Schedule Time the schedule will pop up Click icon and move the cursor to select time Click gt icon and move the cursor in the blue area to erase the time selection You can also manually input the time or modify schedule time through clicking Select All Reverse Select or Clear All button Finally click Modify Schedule button
30. 55 255 0 i pS Default gateway 192 168 6 1 i _ Uninstal E Properties o el Description Transmission Control Protocol Internet Protocol The default Use the following DNS server addresses wide area network protocol that provides communication across diverse interconnected networks Preferred DNS server 210 21 196 6 Obtain DNS server address automatically Alternate DNS server 210 53 31 2 C Show icon in notification area when connected Notify me when this connection has limited or no connectivity O f the authentication server runs in LAN please input the LAN IP address and port of the authentication server O f the authentication server runs in WAN please input the WAN IP address or select Domain to input the domain name and port of the authentication server After inputting all information please click OK button and then click Close button to return to the login window Then click Login button to enter into the Config Client interface Username admin 4 Password e Authentication jjJauthentication server server Login Config Client includes three modules Device and Server Account and Permission System and Security Click the relevant icon or blue letters to enter into the relevant module te Config Client Platform System Settings Device and Server Create
31. An O RE E o E 70 EE crc 1 Introduction 1 1 NVMS 5000 Brief Introduction 1 1 1 Summerization NVMS 5000 which combines video capture devices including various DVR DVS IPC alarm capture devices including various alarms and sensors servers IP SAN clients including mobile phones and background monitor monitor and TV Wall is a set of network video surveillance and management software It is suitable for large medium and small enterprises to use Warm device Sensor 1 1 2 Software Architecture Application Client my qQ J ILLA 5 a L Laptop ctient __ Phone Client E E E Application Service Alarm trigger A Record playback Auto Dwell Manager Client Configuration Center Device Access DVR Media Service Storage Service E gt z IPCAM qu l q Alarm Service TV wall Service S a a m l s oe 9 TV wall output E Other System HA AAA AAA AA rating System D O AE va manual 1 2 System Components 1 2 1 System Control Center Authentication Media Server E map Server IP SAN Seryer Front end Access Background Monitor Rig a Y y ie CONT a eons Camera g Client G gt b a LE TV wall nda Alarm Server Storage Server switch LUA Internet LAN 1 2 2 Front end Access Front end devices include IPC DVR and DVS
32. Authentication Server to run this server as shown below Because other modules are not started there is no information listed 13 Jser manual E Authentication server 4 Config Client 1 3 5 admin 192 168 50 38 7 9 2013 4 18 15 PM 4 Media Server 1 Wi mdu 22 127 0 0 1 7 10 2013 10 37 52 AM Description This server manages the whole system 4 mW Service Status Started Server Name ID User Name IP Login Time 4 EMap Server 1 I emapserver 6 192 168 50 38 7 9 2013 2 36 20 PM Name zero PC Port 6003 web server portECHO Start Time 2013 07 09 14 36 18 Run time 1days 0 8 39 E icon to pop up the dropdown list through which you can view the version of servers change the web server port and set up login and maintenance and server parameters Click Change the web server port to modify the web server port The default port of Web Server is 8088 9 Web Server About Authentication server Change the web server port Server start and maintenance configuration Please enter the port 8088 Server configuration parameters To start the software automatically after Boot click Server start and maintenance configuration and check Software Auto Startup after Boot If Auto Reboot PC is selected please input the username and password of the PC the time interval and restart time Finally click OK to save settings ES Server start and maintenance configuration C Softw
33. CAM4 4 the second leve Put the cursor on the schedule name to see the schedule The default schedule is 7x24 You can click this schedule and then click OK button to save settings You can also click Create Schedule button on the left menu bar to set other schedules please refer to Chapter 4 7 1 Schedule Settings for detail information 33 Y so anua cl a cC Config Client 5 Configuration Panel Home Add or remove schedule reate Schedule Q Select a schedule or remove the current schedule for the selected storage channel 00 00r 24 00 Mon E 00 00 24 00 rue i 00 00 24 00 wa i 00 00 24 00 m g 00 00 24 00 mh 00 00 24 00 se 00 00 24 00 l OK D Cancel Modify or Delete Schedule OK If you want to delete the set schedule please choose the schedule and click Remove button to delete it 4 6 4 Sensor Alarm Schedule Setting Click icon to return to the configuration interface of the alarm server Select Sensor Alarm Schedule Setting button and do the relevant settings Please refer to Chapter 4 6 Motion Alarm Schedule Setting for more details Note If no motion alarm schedule or sensor alarm schedule is set up the default schedule 7x24 will be used 4 6 5 Start Alarm Server AS Double click ime icon or click Start gt Programs gt NVMS 5000 gt Server gt Alarm Server to run alarm server A login window will pop up as follows Please input the
34. Contig Client iMedia Transfer Server aay td Storage Server Y ENTERP 1 Enterprise CMS Client Server EMap Server B of space required on the D drive MB of space available on the D drive 6 It will pop up Microsoft Visual C 2008 Redistributable Setup wizard If it is not installed in your PC the following interface will pop up Click Next gt select I have read and accept the license terms click Install if Microsoft Yisual C 2006 Redistributable Setup al AAA dol xj Welcome to Microsoft Visual C 2008 License Terms Redistributable Setup E E e Be sure to carefully read and understand all the rights and restrictions described in the This wizard will guide you through the installation process icense terms You must accept the license terms before you can install the software MICROSOFT SOFTWARE LICENSE TERMS MICROSOFT VISUAL C 2008 RUNTIME LIBRARIES X86 1464 AND X64 SERVICE PACK 1 These license terms are an agreement between Microsoft Corporation for based on where you live one of its affiliates and you Please read them They apply to the software named above which includes the media on which you received it if any The terms also apply to any Microsoft updates ha Print Press the Page Down key to see more text 7 Click Finish button to complete f Microsoft Visual C 2008 Redistributable Setup Setup Complete Microsoft Visual C 2008 Redistributable
35. Corridor 10 Online Schedule Record and Weleda aD 38 Corridor 11 Online Schedule Record a 39 Corridor 12 Online Schedule Record a 40 Corridor 13 Online Schedule Record a 41 Corridor 14 Online Schedule Record a 42 Corridor 15 Online Schedule Record a 43 Corridor 16 Online Schedule Record 4 ii gt al Name storage server Port 6009 Start Time 2012 03 15 15 41 08 Run time Odays 0 13 40 4 5 5 Partition Group Settings of Storage Server Partition group which is comprised of disk partitions stores record data of different devices Storage server must be started before setting partition group In the Device and Server interface click Partition Group Settings of Storage ap Server button Storage Server Create Storage Server Modify or Delete Storage Server Record Schedule Settings Partition Group Settings of Storage Serve Add Channels To Storage Server 1 Create Partition Group Select storage server and click Create Partition Group button cc Contig Client o OX eS admin Partition Group Setting of Storage Server Note When you add channels to the storage server these channels will be added to the default Modify or Delete Schedule partition group automatically if you don t choose the partition group Cache partition Is used to Create Schedule reduce data loss as far as possible when there is insufficient storage space Cache partition is not recording partition so the channel cannot be added to it I Del
36. N t t Saw EE toH Pnn a dixo P200 CAMERAD E SPIOO0CAMERAD Y SP 200 CAMERADI 8 EP 200 CAMERADS P200 CAMERADS P SP 200 CAMERADS Y P200 CAMERADT P lt Select the play screen in the playback area and click button beside the camera name This will take you to see the image The operation steps of this IE monitoring interface are similar to that of the monitor client Please refer to relevant chapter for details 5 3 TV Wall Client 5 3 1 Start TV Wall Client Authentication Server Media Server and TV Wall Server must be started first Please make sure images can be 64 if Y 00 User manual normally displayed on the TV Wall Screen Double click wasiat icon or click Start gt Programs gt NVMS 5000 gt Client gt TV Wall Client to run the TV Wall Server A login window pops up as shown below Input the username and password created below Then click Setup button to input the relevant information of authentication server please refer to Chapter 4 2 Config Client for more details Finally click Login button to enter into the TV Wall Client interface Username admin Username admin Password coocoo Password e Authentication Authentication Jl authentication sever server server The main interface of TV Wall Client displays as follows Resource browse includes all front end video devices and their channels Channel group includes all defined channel dwel
37. NVMS 3000 User Manual UN User Manual Contents B e AA os TN AS 4 1 1 NVMS 5000 Brief Introduction c cc ceeesssssseeeeeceececeeeeeeaaeeaessssseeeeeeeeeeeeeeeeeeaaaeeeeseeseeeeeeeeeeeeeeeeessaaaaaaaaaseeeeeeeeeess 4 MA ira AAA o ae oseaaeaesescacenede 4 MIA o a a e o on IX 4 1 2 System Components OO OPM NEU E e AE ER O E O O E E Eana 5 bP o TE E 00 PP POP o A S E ee 5 As E oO A 5 Pee Worle cure lie MOMO atadas lisis 5 A es Pue e noo o 5 IO NYMS S5000 Vers On ie AAA o ge 6 NA e E a rare ree re ere eee ere eee errr ee to er rere 6 2 1 Software and Hardware Configuration RequireMent ooocccccnnnnnnnnnnnnnnnnnnnnnnonnnonnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnss 6 2 1 1 S amp H Config Requirement for Contorl Center cocccccncnnnnnnnnnnnnnnnnnnnnnnnnnnnononnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnss 6 2 1 2 S amp H Config Requirement for Background MoNItOT oocccccccnnnnnnnnnnnnnnnnnnnnonnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnos 6 IA ia ll IA A E o ECO ter rer emer entre eer eer eee eee eer ee ee ee 7 PR comia station EA ronca is 7 ce e O A 8 NI A A uo In ee E A E E A A E A E A 8 E A aa 13 o An nn E E E 13 4 1 Authentication S CLV Cf csescavciecsenazicantecustasdenedunadinesbestoeasion sd daeuibosd snndicandens seadnoedueadebssbncdvandienndcnecbostdasdeastepenieatenndenanddes 13 NA O 15 SAS e a e E po E E E S 17 A A o PE o ans sassesesasanuereteeesme A ee 17 A E e 19 4A Media Uy Cle
38. Pp i display the control panel of PTZ EY Starv stop talk a Oe B ondo SS Right button functions Menu Description Menu Description Open Manual Snap Snap picture l Start manual record Recording Camera Enter the interface of the area and Start talk Start or stop talk i l Configuration Camera configuration PTZ Control To display the control panel of PTZ Enable Audio Enable or close audio Close Preview Close single channel preview gt Note Click a icon to turn off all channels but click ES icon to turn off the single channel eo Monitory Point Preview User manual 51 To start the live preview drag the cameras from the list to the right display window or select a window and double click the camera to display the live image You can drag the image to any window at random Note Node unfold rule After the first time for setting the device and area you shall obey the following rule to view all tree nodes when the tree node is more than 64 nodes the system will unfold the upper node by default For example A There is camera group AC under A sub area a under AC camera group ac under sub area a If the nodes number is more than 64 A will be unfolded and AC will be displayed but a will not be unfolded and ac will not be displayed If the node number of A is less than 64 A will be folded and all nodes need to be unfolded manually Stop Preview gt Close Preview of Channel Place your mouse on
39. Secunity gt Backup System Config Restore the system configuration data Export system configuration enter into Configuration Panel Home gt System and Security interface and click the configuration here Backup System Config SA Backup or restore setting Ni ce Backup System Config Restore the system configuration data Click Browse to select the storage path input the file name and then click OK R Config Client E Configuration Panel Home Backup System Config Q Select a directory and input filename to backup This backup file is used to restore your configuration data Export path Browse Import system configuration enter into Configuration Panel Home gt System and Security interface and click Restore the system configuration data Backup or restore setting X A Backup System ConfiaK Restore the system configuration data Click Browse to select the configuration file you need to import and then click OK button 73 Config Client Configuration Panel Home Backup System Config Select a directory and input filename to backup This backup file is used to restore your configuration data Setti hongjing Desktop New Folder211 Browse Export path CTA Cane 5 NVMS 5000 Client 5 1 Monitor Client Monitor client is in charge of real time preview playback PTZ control alarm preview and so on Real time preview includes prev
40. You just need to click the shortcut menu and enter to choose the path separately o System Startup and Maintenance In the interface of Basic Configuration click System Startup system startup and Maintenance Settings and Maintenance to enter the interface System Startup Settings Under the system startup settings two ways to enable the Remember Login Boot Software Auto Startup Automatically Restart Your Computer software can be select User Name Interval d 5 Restart Time PESTER OK Cancel If checking Automatically Restart Your Computer user name and password of the computer need to be input time interval and restart time need to be selected 62 I a manual 5 2 Web Client 5 2 1 Operating Environment of Web Client The web client supports IE 8 IE9 IE10 Firefox or Google browser Please make sure that your browser supports the downloading and use of the Web Client Checkup whether the IE browser prohibits Active X control from downloading Open IE browser click tools click Internet Options select Security and click Custom level to pop up a security settings window Then enable all sub options under Active X controls and plug ins gt Checkup whether there are other components or antivirus to stop downloading Active X control Please close other components and configure antivirus and firewall to allow the installation of the file named WebMonitor ocx 5
41. above mentioned alarm server name and password If no modification is made the default name is AlarmServer and the password is null Then click Setup button to input the information of the authentication server please refer to Chapter 4 2 Config Client for more details Authentication Ii authentication server v Authentication somo C Auto Login J Startup Cl Auto Login O Startup ise After that please click Login button to login to the alarm server The alarm server interface 1s as follows Server Name alarmserver Server Name alarmserver y Password Password 34 A PP oo manua _ AS Alarm Server RAE Alarm Status Service Status Started Server Name ID Username IP Login Time 4 Authentication server 1 De 04718484610 1 192 168 6 67 6003 3 20 2012 5 59 20 PM 4 Media Server 1 U media server 8 192 168 6 68 6006 3 20 2012 5 59 43 PM 4 Storage Server 1 Ibstorage server 44 192 168 6 69 6009 3 20 2012 5 59 45PM Description This server handles all alarm trigger the default alarm server port E Name alarmserver CPort 6033 D Start Time 2012 03 20 17 59 45 Run time Odays 0 0 4 Alarm Status Clicking the tab of Alarm Status can see the alarm status of devices 4 7 Schedule Settings Return to Configuration Panel Home Enter into Device and Server gt Schedule interface In this interface you can create modify or
42. ame and drag them to the TV Wall Area one by one Then select a screen mode click Resource browse or click Channel Group or click Playback and drag channel or channel group to one screen as shown below We TV Wall Client Save Saveas Ya Update iO Setup a Resource browse the first level the second level 4 coridor wi CAM2 9 CAM3 gt CAMA wi CAMS gt CAME 4 CAM 4 AE gt HR O wi CAMB CAMI x CAM10 gt CAM11 sp CAM12 sp CAM13 CAML sp CAM15 gt CAM16 gt g office 1 4 i OS 1 H fi OS gt Channel group D DN Playback LS Output corridor fiThe current configuration File corridor Username admin The CUP usage 158 Memory usage 30 2011 10 18 15 49 12 Click MS and then the live images will be displayed on the TV Wall Server The following pictures are the sample pictures displayed on the TV Wall mi TR i dk 66 gt Note Please make sure that Authentication Server and Media Server have run and TV Wall Client has been set well and devices have connected well Then the TV Wall Server can display images normally Button explanations of output interface Function Say Save the video output scheme After dragging channels or channel groups to the output mode click button to pop up a dialog box Input the file name and click Save button as shown in the following picture Then the file name will be listed in the output scheme area
43. are Auto Startup after Boot Password Restart time L Auto Reboot PC User Name Interval of time Click Server configuration parameters to pop up the following window You can modify the internal port The default internal port of Authentication Server 1s 6003 If 1t is changed the changed internal port shall take effect after 14 Y vu ose manual reboot Parameter Settings_Authentication Server ini M dl Service port LAN and WAN Mapping Carrier Relation If it is modified it shall be modified accordingly in the i fi rewall configuration and forwarded in the router Internal Port Setting changes take effect after reboot Apply AA A cancel j 4 2 Config Client Config Client can configure all resource approved by Authentication Server including devices users media servers storage servers alarm server and TV walls After starting the authentication server please run Config Client to create servers add front end devices and configure the whole system Double click BRE icon or click Start gt Programs gt NVMS 5000 gt Client gt Config Client to run Config Client A login window will pop up as shown below Please input the username and password The default username is admin and the default password is admin Then you should setup the IP address and port of the authentication server at the first time Please click Setup to pop up a window 73 Authent
44. ate Area button Then input new area name to create the upper area After that please click OK button to save settings 73 Config Client Create Area Q Please input the area name Upper Area Area Name xxx x ame To create the lower area please click Create Area and then choose the Upper Area and input the area name After that click OK button to save settings ce Contig Client Create Area Q Please input new area name Upper Area the first level the second level Limited to 1 60 Characters Area Name IATH If you want to create another upper Area please don t choose the upper area Input the area name directly Then click OK to save settings 18 4 3 2 Add Device Select the created area and click Add Device to add device to this area as shown below 73 Config Client admin Configuration Panel Home Create Modify and Delete Device Modify or Delete Media Q Please select item from the list to change or delete Server Modi Delete St y Dreta Storage y Create Area 2 Modify f Delete Server Media Server IP or Dom Mladify or Delete Schedule Name Type Channe Sensor Count Alarm Out C a Othe first level Trigger Setup o E Modify or Delete Account There are three ways to add device O Input Device Information Manually In device creatio
45. atus Started Server Name ID Username IP Login Time 4 Authentication server 1 Wie d471848461d 1 192 168 6 67 6003 3 20 2012 5 43 09 PM 9 admin 210 21 229 141 5015 3 20 2012 5 43 09 PM Pom 6006 Start Time 2012 03 20 17 43 07 Run time Odays 0 13 26 Name media server If you want to stop media server please click Stop Service button A window will pop up to ask for password You should input the correct password of the media server and click OK button to stop service If you want to start service you still need to input the password It is the same with the following server to stop start service MS Stop Service of Media Server Server Name C Auto login in the next time Cancel Password PR i 4 5 Storage Server Settings Storage server is in charge of the storage of resource information including the information of manual record schedule record sensor alarm and motion alarm record and responds to the research and read of all storage data Additionally it also supports self defined storage path settings and IP SAN access 4 5 1 Add Storage Server In the configuration panel home click Device and Server and then click Storage server as shown below 24 O PP oo manua Gin gt Server Create Storage Server Modify or Delete Storage Server Record Schedule Setting Partition Group Setting of Storage Server Add Channel To Storage Server Enter into the configuration
46. can be realized only in live preview or playback 16 14 07 281 bmp gt Talk Click El button on display window or right click to pop up a menu bar Choose Start Talk to enable bidirectional audio Note Since NVMS 1000 only allow you to open one device s talk at the same time the system will stop talk with the current device for enabling new talk with another device which is launching talk gt Broadcast 1 Click System on the menu bar of software at the upper right choose Broadcast to enter the interface O Click MAS button to pop up a window then check the devices you want to broadcast click OK button to save the O Add Dewice setting Start B sti CS Click A button to stop Locked broadcast Modify Password Basic Setting gt PTZ Control Please confirm the parameter of PTZ has been configured correctly before operating PTZ Click icon in display window or Change Camera Setting under Device to enter the interface Click PTZ Setting to enable PTZ and setup protocol baud rate and address of PTZ Note Here the protocol baud rate and address of PTZ must be consistent with the PTZ decoder Select the channel and click Metal icon or right click to choose PTZ Control to open the control panel of PTZ Click the direction buttons to control its rotational direction drag the slider to control its speed Preset Cruise
47. dth C FAT32 37 6G 24 2G 24 2G Uninitialized Yes No E NTFS 58 6G 434G 43 4G Uninitialized Yes Yes CL Stop Service gt F NTFS 78 1G 63 4G 63 4G Uninitialized Yes No 3 Stop Service of Storage Server Description Server Name This server stores video and audio data PAAGA C Auto login in the next time iiij Please stop service before formatting disk J i Name storage server Port 6009 Start Time 2012 03 15 15 41 08 Run time Odays 0 9 14 j Recording Status Check whether the device is online or not and view the record type The record type includes schedule record sensor alarm record and motion alarm record These records will display after the schedule is set 28 A 0 manual For example when the device is under schedule record condition the recording status will display as below 8 Storage Server TE ESLIRE Q Connection Status Partition Status 3 Service Status Started ID Device Name Channel Online Status Record Type a 24 ottice 15 Online ww 25 office 16 Online a 28 Corridor 1 Online Schedule Record aw 29 Corridor 2 Online Schedule Record ow 30 Corridor 3 Online Schedule Record aD 31 Corridor 4 Online Schedule Record a 32 Corridor 5 Online Schedule Record ow 33 Corridor 6 Online Schedule Record aw 34 Corridor 7 Online Schedule Record a 35 Corridor 8 Online Schedule Record A a 36 Corridor 9 Online Schedule Record Description gt A Tra atores video aw 37
48. e LJ Default Partition Group C Modify or Delete Media Ll ls Server M office le office O office O office O office lee office O office O office O office le office O office O office O Corridor ill ll Alv lt Modify or Delete Storage Server A CO Cea Create Media Server 4 6 Alarm Server Alarm server 1s in charge of receiving and recording alarm information of connected devices and then sending the alarm information to the relevant user terminal system or devices in accordance with prior alarm settings Alarm Server Modify Alarm Server Trigger Setup Motion Schedule Setting Sensor Schedule Setting 4 6 1 Alarm Server Setting There is only one alarm server in NVMS 5000 system and the system has already created an alarm server named AlarmServer The default password is null When logging into the alarm server no password needs to input Enter into Configuration Panel Home gt Device and Server gt Alarm server interface as shown below You can modify the alarm server name and password and set alarm trigger including record alarm trigger big screen trigger motion alarm schedule and sensor alarm schedule 31 o O ra 73 Config Client Configuration Panel Home Modify Alarm Server Modify And Delete Device Q Selectitem to change Modify or Delete Media Server Modify or Delete Storage 2 Server Modify Name AlarmServer Modify o
49. e E Map Server admin Admini Information Suserl Admini 4 10 3 Modify User Permission If the added user is an operator user you can modify the permission Select this user and click Modify User Permission button as shown below c Config Client Configuration Panel Home Create modify delete user or user group Modify And Delete Device Q Select item to modify or delete from the list Modify or Delete Media Server y ly Add User 1 Add User Group TE Delete l g Modify User Permission Modify or Delete Storage Carver Username Accou Telephone EMail Locked Limited Account des Trigger Setup 4 user group 0 Change the E Map Server Information 4 Users outside the group 2 admin Admini No No user1 Admini No No 3 ES ET ee EST E ee 44 A rm The permission includes system permission device permission and TV Wall Server permission Config Client CE ce Select resources for the user x a Othe first level 4 C the second level Modify permission of user user2 intercom and Q Change permission tti vi b ottice 2 cra T A a CAMERAO1 ap CAMERAQ2 Vg Add Resource ap CAMERAO3 V si CAMERADA Name 1 Type Device Rights a CAMERAS Channel Rights Intercom and wd CAMERAD6 Live preview Broadcast ae CAMERAO v Live record Device a CAMERAOS configuration ae CAMERAOS JPTZ Control Device Lag a CAMERALO
50. earched a backup information window will pop up by clicking Download 1 button Click Browse button to choose save path Then click OK button to download record e Download Record by Event Search Click button to display event information list Choose an event and right click to download this event Serial Numbe Start Time End Time Event Type Data Source 3 29 2013 4 27 15 PM e Udo Lo Fdo a la ed Schedule Download o View the Progress of Downloading When starting downloading you can view the progress of downloading and stop downloading manually by put the cursor on the lower right corner under button F Serial N Start Time End Time Had Downloaded Had TakeTime 1 3 29 2013 12 00 00 AM 3 29 2013 11 59 59 PM 68 71 00 00 04 The number of backup 1 5 1 6 5 Synchronized Playback In the playback interface select the playback channel and check synchronized playback 5 1 7 Device Setting In the control panel interface click Device Setting to pop up the following window Here you can set the device 59 AR ore manual parameter ME Monitor Client Control Panel Playback Basic Setting TT 4 bua aes 5 NY TAEST ad Image Settings Record Settings p Le T pE O sC PO z aC a Dy 7 pi pi e P T Motion Detection 4 Video Loss Alarm 5 PTZ Settings The real time image will display when you click one channel You can set the parameter of this channel like the para
51. ecord in the monitor client A Because the HDD room saving the record data of the channel is full so the earlier record files are covered by new created record data 14 Under normal record condition why the record bars of two channels with the same schedule is different in the monitor client A Please checkup whether these two channels belong to different partition group in the storage server or their allocated storage room is different 72
52. ect the associated camera Step 4 Click Y icon to select the hotspot icon Step 5 Click OK button to save settings 42 Office Engineering CEOS MOt t sasan AE Front r AMERAO Motion amp Video loss _ p rid Comidor Door _ _ Reception i a Desk Cn Domestio rricor Corridor MESAN otipggMidediloss Marketing l Commercp Department mid t Department i Test i Lobby Depariment y Perchasing s A Ne ee ee eK eK Comdor Corridor Test Room E ial Internetional HA General RAD nt inancid Mark i M Departmen Department eting De nt A meo Warehouse You can drag the hotspot icon anywhere Please move it to the right position on the map according to the actual position of the camera Right click the hotspot to delete or modify the hotspot Step 6 Adjust the position of the hotspot and then click Save button on the menu bar 4 10 Account and Permission NVMS 5000 user consists of operator and administer The permission of administer cannot be modified Only the permission of the operator can be set 4 10 1 Add User Enter into Config Client gt Account and Permission gt User Account interface and click Add User button 73 Config Client ee Configuration Panel Home Create modify delete user or user group Modify And Delete Device Q Select item to modify or delete from the list Modify or Delete Media
53. efinitions License shall mean the terms and conditions for use reproduction and distribution as defined by Sections 1 through 9 ofthis document I do not accept the terms in the license agreement InstallShield 11 Read the information of Apache HTTP Server and then click 4 Apache HTTP Server 2 2 Installation Wizard E Read This First Read this Before Running Apache on Windows Apache HTTP Server What is it The Apache HTTP Server is a powerful and flexible HTTP 1 1 compliant web server Originally designed as a replacement for the NCSA HTTP Server it has grown to be the most popular web server on the Internet As a project ofthe Apache Software Foundation the developers aim to collaboratively develop and maintain a robust commercial grade standards based server with freely available source code The Latest Version Details of the latest version can be found on the Apache HTTP server project page under http httpd apache org Ms s oome lo e InstallShield 12 Set the server information as shown below The information inputted below is for reference only It is recommended to choose port 80as a service Then click to continue yg Apache HTTP Server 2 2 Installation Wizard i Please enter your server s information Network Domain e g somenet com fest com Server Name e g www somenet com www test com Administrator s Email Address e g webmaster somenet test 163 com
54. en click OK button cc Contig Client Create Media Server Q Please input name and password for new media server a Self define the name and password Server Name media server Limited to 1 60 Characters Password ee Limited to 60 Characters Confirm Password eeceee ia Cx 22 A MOON oo manua 4 4 2 Modify Device of the Media Server Er In the configuration interface of the media server to see the device information click E button Then select the media server and the device of this media server and drag the device to another media server When the cursor becomes a green cross release the mouse Config Client es Configuration Panel Home Create Modify and Delete Server Modify or Delete Schedule Q Add Modify and Delete Media Server Modify And Delete Device Modify or Delete Storage fj Add Media Server Modify Delete Server 4 9 d471848461d Device Name ID Type Media Server Ber Setup Us media server Modify or Delete Account Wi Media senser2 Media Server 2 Modify User Permission ae ele 8 Media Server d471848461d Change the E Map Server Media 26 Media Server d471848461d Information 4 Device 1 office 9 DVR 16 media server Now a dialog box will pop up to ask whether to drag the device Please click OK button to confirm the modification 73 Config Client Are you sure you want to drag the device Q
55. er into Configuration Panel Home gt Device and Server gt EMap server interface as shown below You can modify the EMap Server name and password 39 P 1ms so00 AA 73 Contig Client es admin Configuration Panel Home Modify And Delete Device Modify or Delete Media Server Modify or Delete Storage Server Modify or Delete Account Modify User Permission Trigger Setup Modify or Delete TV Wall Change the E Map Server Information Q Select item to change Modify Name Modify Password Create map Modify the Map and Add HotSpot and HotZone EMapServer E Map Server is not online To create map or modify the map you must start the E Map Server 4 9 2 Start E Map Server Double click EMap Server icon or click Start gt Programs gt NVMS 5000 gt Server gt EMap Server to run the EMap Server A login window will pop up as shown below Please input the name and password of the TV Wall Server and then click Setup button to input the relevant information about Authentication Server Please refer to Chapter 4 2 Config Client Finally click Login button to enter into EMap Server interface Server Name EMapServer C Auto Login Password Authentication Ci Setup ssn gt Login O Startup Pe ES EMap Server Service Status Started Description This server provides EMap service 3 Server Name ID 4 Authentication server 1 Ia d471848461d 1 4
56. erver Notice Only the channel assigned to the media server can be assigned to the storage server Create Schedule Modify or Delete Schedule Modify And Delete Device P Add Media Storage Server Modify BM Remove Device Name Channel Name Chann Record Schedule gt 4 st 32 Change the E Map Server storage server 32 Information Put the cursor on the schedule name to see the schedule The default schedule is 7x24 You can click this schedule and then click OK button to save settings You can also click Create Schedule button on the left menu bar to set other schedules please refer to Chapter 4 7 1 Schedule Settings for detail information 73 Contig Client Configuration Panel Home Add or remove schedule gate Schedule Q Select one schedule or remove schedule for this node 5 7X24 Sun E 00 00r24 00 Mon E 00 00r24 00 Tue 00 00r 24 00 wea 00 00 24 00 F A g EE Em 00 00 24 00 Fri 00 00 24 00 se 00 00 24 00 Pa E 4 OK Cc Modify or Delete Schedule aaO 4 5 4 Start Storage Server Double click la icon Cor click Start gt Programs gt NVMS 5000 gt Server gt Storage Server storage server A login window will pop up as shown below Please input the above created storage server name and password Then click Setup button to input the authentication server information Please refer to Chapter 4 2 Config C
57. ese logs 61 MC Monitor Client Control Panel Playback Basic Setting Device configu Main tye o Al Sub type Ti Start Time 2013 08 13 00 00 00 End Time cl Select All Reverte p pper m l 1 Operation lo Live preview 5 11 2013 4 14 30 PM Close Ive me 2 Operation lo Live previa 2019 dlii PA Request live Clase lhe Peques lve Request lhe Request lve ReQu n p ayba kiuper 1 Operabon lo E 513 4717 Reguent playbackSucces 1 Operation ho Plain ci 17 Request playbacksucoces 1 Synem log Login Logos 3 13 2013 at Login successful Login successful Service ctarted taled sea First page Previous MEE Lar Page Select the main type and sub type start time and end time and then click Search button to see the relevant log information If you need to export the log information you can click Export button after you search the relevant log information and then click Browse button to find the export path Finally click OK button to export those log to the designated folder 5 1 10 Basic Setting Click Basic Setting on the monitor client to pop up the following window Control Panel Playback pa 7 X Device configu ME Monitor Client i Check eyrtem 5 Video path setting system Startup and Maintenance In this interface you can set record path record backup path snap path and the default number of the snap as well as system startup and maintenance eo Video Path Setting
58. ete Channel Configuration Panel Home Create Area Modify And Delete Device Modify or Delete Media Server k M Create Partition Group A Modify Partition Group es Partition Group Name J E Add or Remove Channel From Partition Group Driver letter a storage server 1 S Default Partition C E F Select the disk partition and then click OK button to create a new partition group for the storage server 29 73 Config Client admin Create partition group for the storage server storage server Note Only one cache partition group can be created When the storage server adopts the IPSAN Q network storage mode in order to reduce the loss of data to the greatest extent you cannot select the network disk partition in case the network disconnects momently or the storage device in one network disconnects and then automatically switches to another network to store Driver letter File System Partition Size Free Space Status F NTFS 78 1G 63 4G Uninitialized O Set to cache partition ok You can also set a cache partition by checking Set to cache partition 2 Modify Partition Group Return to Partition Group Settings interface Select partition group and click Modify Partition Group button to modify this partition group g You can select more than one partition ld f pan reste Partion Group GZ Modify Partition
59. hardware systems If there are any compatible problems please call our technical supporters to acquire the related support If still unable to solve the problem users can delete this software 77 7 shall not be liable for all damages arising from any other reasons in the use of this software unless it has visibly quality 9 accept the terms of the license agreement Y do not accept the terms of the license agreement 3 Select the setup type take custom type for example and then click Next button NVMS 5000 InstallShield Wizard Setup Type Select the setup type to instal Click the type of setup you prefer then click Next Tvpical Program will be installed with the mo users Compact Program will be installed with minimum required options 4 Custor Yo se you want to install Recommended for advanced g user aD 4 Click Browse to choose the destination folder and then click Next o NYMS 5000 InstallShield Wizard Choose Destination Location Select folder where setup will install files Setup will install NYMS 5000 in the following folde To install to this folder click Next To install to a different folder click Browse and select another folder D Program Files NVMS 5000 5 Select features and then click Next button NVMS 5000 InstallShield Wizard Select Features Select the features setup will install es you do not want to install Authentication Server i A Alarm Server
60. ication Server Setup Name Address Port Jj ij Mod Username admin v Delet Password e Default Authentication q Setup server ill gt A toga Name authentication server Name authentication server Address 192 168 6 67 L Domain Address renzheng meibu com Y Domain Port 6003 Port 6003 O You can self define the name If the authentication server runs in the PC which the authentication server is installed you can input your LAN IP address Double click My Network Places gt click View network connection under the field of Network Tasks right click Local area connection gt select Properties gt choose Internet protocol TCP IP gt click Properties button to see The default port is 6003 If it is modified please input the modified port 15 nual 4 Local Area Connection Properties wd Internet Protocol TCP IP Properties General Advanced General Connect using You can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for EY Realtek RTL8168D P 8111D P PCI the appropriate IP settings This connection uses the following items Obtain an IP address automatically a QoS Packet Scheduler Use the following IP address ee IP address 192 168 6 67 Internet Protocol TCP IP Subnet mask 255 2
61. iew snap single channel dwell group dwell tab dwell and alarm big screen preview Only when 46 Y vs oer manual the authentication server media server storage server and alarm server 1s started can you start monitor client to view real time video record and alarm information 5 1 1 Start Monitor Client Before starting monitor client you must start authentications server media server storage server and alarm server Me first Double click isisa or click Start gt Programs gt NVMS 5000 Client Monitor Client to run monitor client A login window will pop up as shown below Please input user name and password created in Chapter 4 9 Then click Setup button to input the information about authentication server please refer to Chapter 4 2 Config Client for detail information Finally click Login button to enter into Monitor Client interface UserName 1 Authentication Remember Password Auto Login Login Cancel gt Note One user can only login to one client For example user1 who has already logged in to Config Client cannot login to Monitor Client at the same time If useri wants to login to Monitor Client he needs to exi Config Client first and then log into Monitor Client Me First run the software setting x Default stream of system s Main stream Sub Stream PEE If you login to the Monitor Client for the first time you should choose the stream before you log in Please select 1
62. interface Click Export Settings to backup the settings of TV Wall Client Click Import Settings to restore the settings of TV Wall Client _ We TV wall configuration Export TV wall configuration information Please input the storage path and file name of the configuration you want to import This file can be used to restore the original configuration Export Settin y if ati We TV wall configuration Import TV wall configuration information Please select the configuration file to import The program needs to reboot after successful import mport Setting 6 FAQ 1 How to modify the password by yourself A Login monitor client and click icon to pop up a drop down list as shown in the left picture Click Modify password to see a window as below Input the current password and new password confirm password and then click OR Me Modity user password Modify user password gt m 70 User manual 2 Unable to login IE client A 1 Please checkup whether the Active X control is forbidden to download and refer to the operating environment in Chapter 5 2 1 2 Please checkup whether the IP address input in the browser address bar is right Suppose the LAN IP address of the authentication server is 192 168 6 67 WAN IP address is 58 251 86 194 domain name is renzheng meibu com and Web port is 8088 If logging in
63. interface of the storage server as shown below 73 Contig Client Configuration Panel Home Create modify and delete storage server Modify or Delete Media Select storage server to modify or delete select channel of storage server to setup schedule Server Notice Only the channel assigned to the media server can be assigned to the storage server Create Schedule e aa OP Add Media Storage Server y Modify H Remove jii Add or Remove Record Schedule s eee ete Schedule Device Name Channel Name Chann Record Schedule N Modify And Delete Device Change the E Map Server Information Y office CAM1 1 m rr oan an A 4 Not assigned channels for storage server 32 73 Config Client r Create Storage Server Q Input storage server name and password Server Name storage server Limited to 1 60 Characters Password Limited to 60 Characters Confirm Password QC cme Input the storage server name and password and then click OK to create a storage server Return to the configuration interface of the storage server If you want to modify the created storage server please select the storage server and click Modify button to change the name and password To delete the storage server please select the storage server and click Delete button 4 5 2 Add Channels to Storage Server A WEST In the configuration interface of the storage server select channe
64. l Name Char Channel Mame Channel s HS storage server Channel Co a Ol the first leveliChannel Cou QDA the second level Chann Modify or Delete Media S Li otfice Channel Cou Server lee CAM 1 Jr CAE Pb CAMS 3 BEJAN 4 De CAMS 5 Ju CAE I lt Da CAM 7 Lae CAME 8 gt De CAMS y Ce CAM 10 10 Lis CAMI11 11 Ce CAM12 17 Cb CAM 13 13 Coe CAM14 14 Lie CAMI 15 Ja CAM 16 16 E lA Cornidarn Channel E Modify or Delete Storage Serer Create Media Server MET Steps First select storage sever Second select channel Third click icon to add the channel to the storage server Finally click OK button to save settings If you want to add all channels of a device to a storage server please select the storage server and then select the device name and icon If you want to delete channels listed in a storage server please select the storage server and channels and then click icon to delete 4 5 3 Setup Record Schedule Return to the configuration interface of the storage server to setup record schedule for these channels Select a channel and click Add or Remove Schedule Channel or directly click Record Schedule Settings in the Device and Server interface 26 73 Contig Client e Configuration Panel Home Create modify and delete storage server Modify or Delete Media Select storage server to modify or delete select channel of storage server to setup schedule S
65. l scheme Output includes all decoding outputs of TV Wall which have started Note The quantity of the video decoding outputs is determined by the quantity of decoding cards installed in the computer The video decoding card available for the software supports two HDMI outputs one VGA output and two BNC outputs The VGA output and the HDMI output beside it display the same contents therefore the resolution o the display connected to VGA port must be 1920 1080 The utmost decoding capacity for each card is to output 16 CH images with the resolution at 1080P and 16CH images with the resolution at 960H that is to say each card can decode a maximum of 32 CH images MTV Wall Client lt Channel group Save Save as vs Update oR Setup aa Resource browse 4 Othe first level 4 Othe second level TV Wall Area Device Name Channel Na Ch 4 corridor gar JAMEN cam z he CAMERAO3 3 Y dvr CAMERA04 4 wp CAM3 Output a CAM4 a Btv a CAM 5 vsa No 0_Output0 wp CAM6 vsa No 1_Outputl wp CAM enc No 2_Output2 wp CAM8 enc No 3_Output3 wp CAMS vea No 4_Output wp CAM 10 ae CAM11 ap CAM 12 ae CAM 13 we CAM 14 ae CAM15 ae CAM 16 3 office output scheme area i a a corridor fi Username admin The current configuration file new File The CUP usage 51 Memory usage 46 2011 10 L NVMS 5000 User manual 5 3 2 TV Wall Output Left press the output n
66. lick again to recover the window gt Stream of Live Preview Right click on the display window to choose recording stream as shown on the right The above stream is mainstream eg D1 25fps and the below is sub stream eg CIF 6fps Modify Device Stream Click bes button on the display window to enter the Area and Camera Management interface Click Image Quality under Image Setting to modify device stream Please refer to chapter 3 3 2 Image Settings for details ERA gt Audio Right click on the displaying window to choose Enable Audio or click qe icon to enable audio of this channel Note Only one audio can be enabled at the same time If enabling another channel s audio the enabled audio will be closed automatically gt Zoom In Click fey icon on the toolbar in the displaying window to zoom in the image click ES icon to recover the image 53 BRE a manual gt Snap Click 9 button on the toolbar of the selected channel or right click to choose Snap to capture the pictures Message Prompt i i y Menr ade picture Picture path lt After snapping pictures a message prompt box will pop up to remind you a sl LO AA gi amp oe de Q E Successfully capture picture Picture path the pictures are captured successfully and where the pictures are stored A ae ee a Successfully capture picture Picture pathx capture New Devicel_CAMERAO3 2012 11 02_ Note Capturing pictures
67. lient for more detail information Finally click Login button to login to the storage server Server Name storage server E Server Name storage server w Password e Password e Authentication Setup Authentication Ii authentication server v C Auto Login O Startup O Auto Login Startup ton a Service Status Started Server Name ID Username IP Login Time a Authentication server 1 9 d471848461d 1 192 168 6 67 6003 3 20 2012 5 58 43 PM 4 Alarm Server 1 Ib AlarmServer 2 4 Media Server 1 U media server 8 192 168 6 68 6006 3 20 2012 5 59 43 PM Description This server stores video and audio data the default storage server port 2i A Name storage server Port 6009 Start Time 2012 03 20 17 58 40 Run time Odays 0 0 5 Partition Status Check the information of disks Click Refresh button to refresh disk information Format the Disk You can format disks Before formatting you shall click stop service to stop the service of storage server first You should input the password of this server when you stop or start service Then select the disk to format Finally click Format button Note The disk cannot be set to record partition before formatting ES Storage Server 2 Connection Status D Recording Status Service Status Started Drive File System Partition Size Free Space Available Space Status Assigned Wi
68. ls and drag these channels with the mouse into the storage server Release it when the cursor changes into a green cross Then a dialog box will pop up to ask you whether to move these channels Please click OK to confirm 25 73 Contig Client Configuration Panel Home Create modify and delete storage server Modify or Delete Media Select storage server to modify or delete select channel of storage server to setup schedule Server Notice Only the channel assigned to the media server can be assigned to the storage server Create Schedule Modify or Delete Schedule D Add Media Storage Server Modify 1B Remove TTA Ada or Remove Record Schedule Device Name Channel Name Chann Record Schedule Modify And Delete Device e server 0 Change the Map Server E OIGA sarir t A Information 4 Notassigned channels for storage server 32 office CAMI 1 office CAM2 2 office CAM3 3 office A A Enter into Configuration Panel Home gt Add Channels to Storage Server interface as shown below Storage Server Create Storage Server Modify or Delete Storage Server Record Schedule Setting Partition Group Setting of Storage Server Add Channel To Storage Server CGR cc Config Client E Configuration Panel Home Add channel for Storage server Madly or Delete Schedule Create Schedule Create Area Modify And Delete Device Q Select channel to add to the storage server Device Mame Channe
69. ly and then click this button to play frame by frame Backup the start time Backup the end time Download Event list Click this button to pop up the event list 132 11616 1 44 12 1 Z 4 E 16 3 j Playback speed bar Toolbar on Playback Window Icon Description Icon Description SE a Right button functions Menu cheba ai Menu ee D load B To d load record b Oa y a eo M Close Channel Close single channel preview Time time search Full Screen To display in full screen In the playback interface select date and record type then drag the camera to the right display window for playing You Q Record Search can click button to search the record file then click button to playback Playback Record type includes manual record motion detection record schedule record and sensor record 57 I cer manual In the timeline green bar stands for manual record data yellow bar stands for motion record data blue bar stands for schedule record data red bar stands for sensor record data DLAN amp ir 3 e 132 116188 14 12 1 2 4 8 16 32 a wo c J J 5 1 6 1 Playback Mode o Playback by Setting Time Right click the color bar to select Set the Play Time of the Channel X and then a dialog window pops up Input time manually or click button to select time The system will play the video from the time you set Manually set the time of channel 13 Input Time oo 00 16 00 18 0
70. meter of image record motion detection video loss alarm and PTZ Different device settings will be displayed for different device You shall configure it according to its user manual Camera Basic Setting In monitor client click Camera Basic Setting to pop up the following device settings dvr 6036 admin You can change device time search device log manage device disk configure device network etc 5 1 8 E Map To see the Emap tab please enter into the monitor client interface and then click Emap button The EMap Server You can double click the hotspot in the map to see the channel image The hotspot icon will become a twinkling alarm light when there 1s an alarm triggered and the alarm image will also pop up automatically 60 Y 0 ms so00 oe Mt Monitor Client Click Clear All Alarm to clear the current all alarm Click Tile button to unfold all alarm images as shown below Click Pile button to pile all these images ooo a LILA O Preview 1 x Exit e E Preview 2 n a Conrkdo a E Prewiew 3 X i 2 Preview 4 x Domestic Marketing A Department donid Perchasing Es New Device Sensor 1 Click button to tile the alarm preview windows on the right side 5 1 9 System Log Enter into the monitor client interface and click System Log button to see the following tab You can check all kinds of logs and export th
71. n interface input the device information as shown below 73 Contig Client admin Create Device Q Enter the new device information O TA cr AIN Area a1 Y Create Area Media Server M Create Media Server Type IPCAMERA v O Auto report Device Name Limited to 1 60 Characters Stream mode More than two streams Y IP O Use domain Port Limited to 10 65535 User Name Limited to 1 60 Characters Password Limited to 60 Characters Confirm Password Auto Fill Channel Count Limited to 99 Sensor Count 1 Limited to 99 Alarm Out Count Limited to 99 If the media server doesn t create in advance please click Create Media Server to create media server as shown below o MO oo manual ce Config Client Create Media Server Q Please input name and password for new media server a Self define the name and password Server Name media server Limited to 1 60 Characters Password eeeceeceee Limited to 60 Characters Confirm Password eeceeee Cx After you create the media server please return to the device creation interface to select a media server and then click Create Device button to add the device o Search Online Device In device creation interface a device list will pop up by clicking Search Device button _ cc Search device IP Addre
72. n the right then click ME button to remove them from the group Oo Group Dwell Scheme Setting In Virtual Matrix interface click the shortcut menu Modify or Delete Group Dwell Scheme on the left hand ME Monitor Client Control Panel Live preview a 3 x E Create Scheme N Group Name Group ID Click Create Scheme to create a group dwell scheme Then select this scheme and click Change button choose Add or remove channel group of group dwell scheme The way to add or remove channel group of group dwell scheme 1s the same as the channel group setting Please see the above mentioned setting 5 1 3 Live Preview In the interface of control panel click Live Preview to enter the interface 50 Me Moniter Client Control Panel Playback Live previr Basic Setting CAMERADO Open manual recording Sari taik 24 2 2 PTZ Contral E 110004 5p4 v 2 OFJ Channel seting Open Valea Close preview 10100 0H Eat Full Screen CAMERAO Y 0 gt LA M E A o E U q _q A a AIM fc ER a H a Upi r Rann i DIEZ VE 51 Feer Hinas EA A ES GE a l a ET Buttons description of live preview Close All Preview i a A 45588 HHP a k 2 3 ED cs Si as E e ce Screen Mode Full Screen Toolbar on the display window Icon Description Description ee Closeimage o Snap S a E E eee ro PTZ control Clicking the icon will aie
73. ndows 7 SP1 32bit As required by user WAAR User manual 2 93GHz or above 4GB DDR3 NV Professional Ultimate GT430 or AMD HD 6570 or above above 512MB GDDR5 Memory recommend 1GB GDDRS5 memory 500GB SATA 100M NIC It is up to the number of the Windows 7 Windows 2 TV Wall Server Use 8 4 ch decoder l decoding channel XP 32 bit l and output dsplay screen CPU 2G or above Windows XPSP3 32bit Config Client Memory 2GB DDR3 Professional TV Wall Client HDD 500GB SATA Windows 7 SP1 32bit NI 1000M Professional Ultimate 2 2 Requirement for Firewall In order to ensure the network security it is necessary for the system to setup firewall All monitor ports shall be opened in the installed servers The open ports are as follows Server Port Type Port Server Port Type Port Media transfer server Note The above mentioned ports are the default internal ports of servers If all these ports are modified these open ports shall be modified accordingly in the firewall configuration 2 3 Confirm Installation Environment Item Checkup Standard Hardware Checkup whether the hardware meets the standard required including CPU memory HDD etc Checkup whether the software meets the standard required including the type and version of the Software operation system NVMS 5000 version etc 3 Install and Uninstall the Software 3 1 Install the software 1 Find the setup exe file in the DVD disk A
74. oved anywhere To switch to the designated map click this icon If you delete or modify this hot zone you can right click and select Delete or Modify the properties Step 6 Adjust the position of this hotzone icon and then click Save button to save hotzone e Add Hotspot The position of the monitor can be displayed on the map by adding hotspots so that the position of cameras and alarms can be vividly shown The setting steps are as follows Step 1 Select the map on the right hand and click Add HotSpot button on the menu bar Add hotspot on the E map Office Please enter the hotspot name choose the device associated with the hot spot and select the text color to display the hot spot Text ok ED click the color button to select the text color on A Please click the icon button to select the hotspot icon Hotname office_DEVICEO4 Motion amp Video lo Limited to 1 60 Characters Please select the associated camera a MO the first level a MI the second level 2 Ma office OY Sensorl Alarm OY Sensor2 Alarm OY Sensor3 Alarm OY Sensor4 Alarm MPDEVICEO2 Motion amp Video loss C jae DEVICEO3 Motion amp Video loss DEVICEO04 Motion amp Video loss F Awe DEVICEOS Motion amp Video loss J DEVICEO6 Motion amp Video loss Fla DEVICEO7 Motion amp Video loss vi EA L cancel_ Step 2 Select the text color of the hotspot Step3 Input the hotspot name and sel
75. r Delete Account Modify Password Modify User Permission Alarm Trigger Modify or Delete Schedule Change the E Map Server Information Motion Alarm Schedule Setting Sensor Alarm Schedule Setting Create Schedule Create Storage Server Create Media Server Create Area Click Modify name and Modify password button to change the name and password of the alarm server 4 6 2 Alarm Tirgger Settings In the configuration interface of the alarm server click Alarm Trigger to enter into alarm trigger interface Select the device and click Add Trigger 73 Config Client y Configuration Panel Home View and Change Alarm Trigger Settings Modify And Delete Device Q You may create change and delete the alarm trigger settings Modify or Delete Media Server SS Add Trigger 4 7 Modify JA Delete E Modify or Delete Storage 4 EJ the first level Input Output Server a the second level Modify or Delete Account corridor Modify User Permission office Modify or Delete Schedule Trigger Record Select a channel click Select Channel button under the title of Trigger Record and then select the trigger record channels After that click OK to save the selected channel Finally click OK button in the alarm trigger interface to save all settings 73 Config Client re j To create or modify Trigger config 2 a Device Channel o a d471848461d
76. r and storage server the storage server still 71 7 KE User manual cannot save A 1 Please checkup whether channels of devices are added to the storage server 2 Please checkup whether the partition groups are set for the storage server 10 After the device is changed it still cannot record when re logging in to the storage server A Please login the config client to reset the partition of the storage server You must reset the partition group of the storage server after changing PC because the different PC maybe have different partition group Finishing the configuration the record status of the storage server shall be normal 11 When entering to the TV Wall server prompt Login failed Reason This server name does not exist When entering into the TV Wall Client prompt Login failed Reason This user does not exist A 1 Please checkup whether the relevant server name and user account of TV Wall Server has been created 2 Please checkup whether the server name is right when logging in to the TV Wall server Please checkup whether the username is right when logging in to the TV Wall Client 12 Why does the PTZ control interface is blank after the user enters into the monitor client A You need to drag channels to the live preview area and then operate in the PTZ control interface 13 Under normal record condition why there is no record in the front of the record bar sometimes when viewing a channel r
77. rc ah Department Department I Test Department l Coridor Corridor Test Room Internetional R amp D Department Financial Marketing H Department Department i Warehouse J Click the map display area scroll the mouse wheel to zoom in the map and click zoomout button to zoom out the map eo Modify Map Select the map name on the right hand and click Modify Name on the menu bar to modify the map name o Add HotZone If there are multiple maps to manage you will needs to use this function Because you can quickly switch maps from one to another through clicking hotzone icon after you add the hotzone It s much convenient for users to browse the map The steps are as below Step 1 Select the map name on the right hand and click Add HotZone button on the menu bar Then a dialog 41 Y vu o manual box will pop up as follow Add hot zone on the E map Office Q Please enter the hot zone information Text lt p Please click the color button to select the text color co Please click the icon button to select the hotzone icon Please select the associated hotzone map Map Name NanShan Step 2 Click color box E to select text color displaying under the hotzone icon Step 3 Click gy icon to choose the hotzone icon displaying on the map Step 4 Check the associated map Step 5 Click OK button to save settings ds a dame The hotzone icon can be m
78. rted 2 Please checkup whether channels are added to the storage server 3 Please checkup the record schedules of the storage server are set correctly 4 Please checkup whether the partition groups of the storage server are set correctly The configuration of devices cannot be modified remotely after the user logins to the monitor client 1 When the device configuration is required by the monitor client and pop up the prompt Someone is configuring Please try later please open the IE browser to login to the device remotely and then enter into Info gt Online user interface to see 1f there are any other users logging in 2 Please go to the live to see whether the device is setting up 3 If the problem still exists please contact your device manufacturer The preview image on the client cannot display fluently 1 Please check whether the CPU occupancy rate of the client platform is 100 or there still has usable memory This situation will not emerge when the CPU occupancy rate 1s less than 75 and there still has usable memory 2 Please checkup whether the network environment is supported including whether the uplink bandwidth of the device and stream match and whether the downlink bandwidths of the media transfer server and the streams of all channels of devices match 3 Please checkup whether the media transfer server is overload operation 9 After starting the authentication server media transfer serve
79. ss Port Number MAC Address 192 168 6 14 2008 SEAT Device Information 192 168 13 177 3008 00 18 ae 34 a8 5e Type TYT DVR 4 192 168 13 189 6036 00 18 ae 2a 7a c9 MAC Address b2 ea 75 d7 3b 73 Software Version 3 2 Network Information IP Address 192 168 13 162 Subnet Mask 255 255 255 0 Data Port 6036 The device IP address port and MAC address E TOO on the same network area will list on the Search Device window You can double click the IP address which is on the same network segment as the authentication server s The device type stream mode IP address and port will be added automatically Then you just need to select area and input device name username and password The channel count sensor count and alarm out count will be automatically filled by clicking Auto Fill button Auto Report In device creation interface select device type and checkmark Auto report as shown below 20 73 Config Client admin Create Device Q Enter the new device information Area pi Y Create Area Media Server M Create Media Server Auto report lt Type IPCAMERA Device Name Limited to 1 60 Characters Stream mode More than two streams Y Device Number Channel Count Limited to 99 Sensor Count Limited to 99 Alarm Out Count 1 Limited to 99 Select area and media server and inp
80. storage server 32 4 Select Channel gt Sensors Alar F sensord Alas CAMI office CAM Police CAMS a ofice CAMA lam ohice CAMS JWoflice CAME O woaffice CAM Dl aoffice CAMS DO wtoffice CAMS O wotfice CAMILO Clap office CAMI11 O oiice CAMLZ O wWottice CAML Oateoffice CAM14 LD office CAMIS O office CAME Piar Ca ada dq ox D Trigger Audio Checkmark trigger audio There will make a sound on an alarm 32 BA a manual 4 adv Y Sensor 1 Y Sensor 2 Y Sensor 3 Y Sensor 4 amp CAM1 Motion Alarm O Trigger Audio CAM3 Motion Alarm CAMA Motion Alarm Trigger Select Channel Device Name Channel Media Server Trigger Big Screen Select a channel click Select Channel button under the title of Trigger Big Screen and then select the trigger record channels After that click OK to save the selected channel Finally click OK button in the alarm trigger interface to save all settings Finishing setting you can see all alarm trigger information in the alarm trigger interface To modify the alarm trigger information please select the relevant channel and click modify button To delete the alarm trigger information please select the channel and click delete button 73 Config Client x E ES admin Configuration Panel Home View and Change Alarm Trigger Settings Modify And Delete Device Q You may create change and delete the alarm
81. t according to the actual condition of your camera After logging in to the monitor client the following interface shows 47 AAMI AERIS User manual ME Monitor Client Playback Live preview Playback Device setting Virtual Matri e System log 4 Basic Setting There are five areas in the main interface of this software The descriptions of each area are as follows Area Description Area Description ICI ECN O Description of Menu Bar Menu Dept eee Export the control panel live preview playback tab and lock or exit the client Export the live preview control panel local log E map alarm preview playback user account and permission basic configuration and device management and organize the live view Help View user manual and software version Descriptions of Function Module Description Live Preview To view live images and record snap control PTZ etc E Playback To remotely play the local record mee E map To manage and display maps hot zones and hotspots To operate E maps zoom D in out e maps view hot zones and hotspots display alarm information on the map Virtual Matrix To create modify or delete camera groups and schemes System Log To search view and backup local log Basic Configuration To setup record partition and path system startup and maintenance amp backup and restoration 48 IAN User manual Descriptions of Other Buttons
82. to save all settings 36 2 gt Manual Input SelectAll Reverse Select Clear All 0 1 2 3 4 Fi 6 7 8 9 TO ZA LL AL EL LAZO Mon i Tue p 4 EZH i Ea 7 Fri p i 05 32 07 13 Manual Input SelectAll Reverse Select Clear All Modify Schedule 2 Delete Schedule Enter into the schedule configuration interface Select the schedule you want to delete and then click Delete button 4 7 3 Set Shedule for All Applications Click icon to return to Device and Server configuration interface Click Set Schedule for All Applications button to set record schedule motion alarm schedule and sensor alarm schedule 4 8 TV Wall Server Settings TV Wall Server 1s in charge of decoding the video signal sent by media server and display images on the TV wall However decoding the video signal and displaying images on the TV Wall must install decoding card in the PC 4 8 1 Create TV Wall Server Start Authentication Server and Config Client and then enter into Configuration Panel Home gt Device and Server TV Wall Server interface Create TV Wall Modify or Delete TV Wall Click PV Wall to enter into TV Wall Server configuration interface Click Add TV Wall Server button 37 73 Config Client 4 admin Configuration PanelHome Create Modify or Delete TV Wall Server Modify And Delete Device Modify or Delete Media Server Modify or Delete Storage Server Modify or Delete Account
83. to the IE client in LAN please input http 192 168 6 67 8088 or http 58 251 86 194 8088 or http renzheng meibu com 8088 If logging in to the IE client in WAN please input http renzheng meibu com 8088 or http 58 251 86 194 8088 Conly when the WAN IP is a fixed IP will it take effect The device information cannot be seen after the user logins to the monitor client 1 Please checkup whether this user account is a administer account If this account is an operator account please checkup whether it has the authority to view the device information 2 Please checkup whether the media transfer server of the device has been started The alarm information cannot be received after the user logins to the monitor client A 1 Please checkup whether the alarm server has been started 2 Please checkup whether the schedule of sensor alarm or motion detection alarm are set in the NVMS 5000 system 3 As for remote login device in the monitor client please checkup whether sensor alarm and motion detection alarm of the remote login device have enabled The images of online TV Wall servers cannot be seen after the user logins to the TV Wall client A 1 Please checkup whether the TV Wall server starts correctly 2 Please checkup whether the user has the authority to enter into the TV Wall server The record cannot playback after the user logins to the monitor client 1 Please checkup whether the storage server has sta
84. trigger settings Modify or Delete Media Server eS Add Trigger CID Botte 0 Modify or Delete Storage a E the first level Input Output Server 4 Elthesecondlevel corridor Sensor3 Alarm Trigger Preview Modify or Delete Account corridor corridor Sensorl Alarm Trigger Record Modify User Permission a office corridor Sensor3 Alarm Trigger Record corridor CAM1 Motion Al Trigger Preview corridor CAM1 Motion Al Trigger Record corridor CAM2 Motion Al Trigger Preview corridor CAM2 Motion Al Trigger Record Modify or Delete Schedule To conceal or reveal the input and output information of DVR please click icon 4 6 3 Motion Alarm Schedule Setting E in 8 Click icon to return to the configuration interface of the alarm server Select Motion Alarm Schedule Setting button to enter into its configuration interface Choose channels and click Add or Remove Schedule button as shown below 73 Config Client ee admin Configuration Panel Home Set up mobile alarm scheduling scheme Modify And Delete Device Modify or Delete Media Q Choose channel and add modify or delete motion alarm schedule for the channel a race 4 Othe first level Device Name Channel Name Chann Schedule Name Area 4 Ol the second level K the second lev Modify or Delete Schedule F office CAM2 2 the second leve F office CAM3 3 the second lev office
85. ut device name device number channel count sensor count and alarm out count You also need to configure the network of the device before the auto report takes effect Please see the network configuration chapter of the device user manual for the detail configuration After adding the device return to the device configuration interface Now you can see the information of the device listed as below 73 Config Client Create Modify and Delete Device Configuration Panel Home Modify or Delete Media Q Please select item from the list to change or delete Server Modify or Delete Storage i y 4 Ep Create Area gp Add Device 2 Modify f Delete Name Type Channe Sensor Count Alarm Out C IP or Dom Port Media Server ID Server Modify or Delete Schedule a Othe first level a Edthe secon amp iile Trigger Setup Modify or Delete Account 5015 mediaserver 9 210 2122 DVR To modify the device name password IP address Port and the media server of the device please select the device and click Modify button To delete this device please select the device and click Delete button If the video signals connected to this software are more than 300 channels you shall register The system will support to add the third party device after registration Please refer to the below picture Here you can choose to add other device Type 1 or other device type 2 2
86. welcome interface will pop up by double clicking it Now click Next button NVMS 5000 InstallShield Wizard Welcome to the InstallShield Wizard for NVMS 5000 The InstallShield Wizard will install NYMS 5000 on your computer To continue click Next NVMS 5000 InstallShield Wizard License 6 This software is only applicable to the following operation system such as Windows P 2000 Vista Windows 7 Using these operation system can realize all functions and service of this software at any time and reduce the response time If the user don t want to use this software after installation please uninstall this software from control panel The user shall be responsible for all the consequences arising therefrom 7 In consideration of the differentiation and complexity of the PC s software and hardware we cannot guarantee that this software can run normally at any circumstance or can live up to all expectation of users Dur company shall not be responsible for all consequence arising from the user s use of this software 8 This monitor software shall not track or monitor user s computer or monitor the online and offline activity of users or collect other personal information such as software information file information etc used by users or collect user s privacy or offer these privacy to the third party 9 This software are tested carefully but we still cannot guarantee that it can be completely compatible with all software and

5 NVMS-5000 Client

Contents

Download Pdf Manuals

Related Search

Related Contents