Home

XD-4080

1. XD 4080 Loudspeaker Management System User Manual re XILICA Audio Design XD 4080 User s manual Page 1 CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flashwith arrowhead symbol within anequilateral triangle is intendedto alert the user to the presence of uninsulated dangerous voltage withinthe product s enclosurethat may beof sufficient magnitude to constitute a risk to persons The exclamation point within an equilateral triangle isintended to alert the userto the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Important Safety Instructions 1 READ THESE INSTRUCTIONS All the safety and operating instructions should be read before the product is operated 2 KEEP THESE INSTRUCTIONS The safety and operating instructions should be retained for future reference 3 HEED ALL WARNINGS All warnings on the product and in the operating instructions should be adhered to 4 FOLLOW ALL INSTRUCTIONS All operating and use of instructions should be followed 5 DO NOT USE THIS APPARATUS NEAR WATER Do not use the product near water For example near a bathtub washbowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like 6 CLEAN ONLY WITH DRY CLOTH Unp
2. Note Specifications subject to change without notice XD 4080 User s manual Page 27 10 0 Warranty The XD 4080 is warranted covering materials and workmanship for a period of two 2 year as determined by the date of retail purchase according to the sales receipt from an authorized dealer or the date of manufacture if the sales receipt is not available according to the serial number This warranty applies to the product therefore the remainder of the warranty period will be automatically transferred to any subsequent owner This warranty applies only to failure of a Xilica product caused by defects in materials and workmanship during the stated warranty period It does not apply to a unit that has been subjected to abuse accident modification improper handling installation or repairs made without factory authorization or by anyone other than authorized Xilica Field Service Stations This warranty is void if the serial number has been defaced altered or removed Products covered by this warranty will be repaired or replaced at the option of Xilica without charge for materials or labor provided all the terms of this warranty have been met For factory service please call or email for a Return Authorization RMA number before shipping If the product is shipped the following information must be included in the package 1 Owner s complete name daytime phone number return street address and return authorization number 2 T
3. 13 15 Output 2 9 18 21 Output 2 22 24 6 XLR input and outputs Separate 3 pin XLR connectors are provided for each audio input and output The device s output stage employs the balanced impedance topology All I O connectors have pin 1 as ground shield pin 2 as and pin 3 as XD 4080 User s manual Page 10 5 0 Powering Up the Device e After powering up the unit the following initialization screen is displayed on the LCD kkKKKKKK XILICA XD 4080 KKKKK xx x LOUDSPEAKER CONTROLLER XD 4080 v5 00 11110000 INITIALIZING e The initialization process takes about 8 seconds and during that period the unit boots and displays the XD 4080 firmware version e After the initialization process is finished the XD 4080 displays its main screen kkRKKKKK XILICA XD 4080 KKKKK xx LOUDSPEAKER CONTROLLER DEVICE XXXXXXXXXXXX PROG 01 XXXXXXXXXXXX e The screen shows the current program number and program name assigned to the unit The program assigned is always the last program the user recalled or stored before powering down the unit e Now the XD 4080 is now ready to operate XD 4080 User s manual Page 11 6 0 Operating the Device Tips Channel Linking If the user presses one of the Input or Output Menu keys holds it down and press any other Menu key s in the same group Input or Output group then the channels are linked together The green menu LEDs for the linked channels are lit
4. 3 to ims in 0 1ms steps and ranges from 1 to 100ms in 1ms steps e RELEASE Release time Can be set at 2X 4X 8X 16X or 32X the attack time Source Input Mixer OUT_1 XXXXXX MENU Source 1 0 00 4 0ff 2 0ff 3 0ff XD 4080 User s manual Page 17 e 1 2 3 4 Input channel source for the current output channel Can be used to mix the input source or disable it Off If more than one input sources are enabled they will be added together as the source for the current output channel Ch Name Channel Name OUT_1 XXXXXX MENU Ch Name NAME XXXXXX e Refer to the Input Menus for details XD 4080 User s manual Page 18 6 3 System Menus The System Menus allow the user to control and change parameters that are related to the system behavior and general operation It can be accessed by pressing the Sys key in the main menu when no Input Output or System Menu is activated All System Menus require the Enter key to be pressed for the selected action Recall Program Recall The XD 4080 has a built in non volatile memory that can store up to 30 different program setups A program can be recalled using this menu SYSTEM SETUP MENU Recall PROG 1 NAME XXXXXXXXXXXX e PROG Program Number to be recalled e NAME Program Name of the program This is read only the user has no access to them Store Program store The XD 4080 has a built in non volatile memory that can store up to 30 different
5. Ohms 20dBu Electronically balanced 0 1dB 20 to 20kHz 115dB typ unweighted gt 60dB 50 to 10kHZz lt 100dB 0 002 1kHz 4dBu Digital Audio Performance Processor Sampling Rate Analog Converters Propagation Delay Front Panel Controls Display Level Meters Buttons Dial Encoder Connectors Audio RS 232 Power General Power Dimensions Weight 40 bit 96kHz High Performance 24 bit 1 5ms 4 x 26 Character Backlit LCD 5 segment LED Mute Edit Controls Menu Controls Embedded Thumb Wheel 3 pin XLR Female DB 9 Standard IEC Socket 100 240 VAC 50 60Hz 19 x1 75 x9 483x44x229 mm 7 Ibs 3 2 kg Audio Control Parameters XD 4080 User s manual Page 26 Gain Polarity Delay Equalizers 6 per I O Type Gain Bandwidth 40 to 15dB in 0 25dB steps Up to 650ms per I O Parametric Hi shelf Lo shelf 30 to 15dB in 0 25dB steps 0 02 to 2 50 octaves Q 0 5 to 72 Crossover Filters 2 per Output Filter Types Slopes Taps Limiters Threshold Attack Release System Parameters No of Programs Program Names Delay Units Frequency Modes Security Locks Copy channels Channel Names Butterworth Bessel Linkwitz Riley FIR 6 to 48dB oct 50 to 1200 20 to 20dBu 0 3 to 100ms 2 to 32X the attack time 30 12 character length ms ft m 36 steps oct 1Hz resolution Any individual menu All parameters 6 character length
6. input and output channels Temperature System Internal Temperature SYSTEM SETUP MENU Temp CPU TEMP 30 0C 86 0F Security Security Locks The XD 4080 enables the user to secure the unit and prevent undesired changes in the setup In order to switch between the security level the user must enter the correct password SYSTEM SETUP MENU Security MENU In Signal LOCK No PASSWORD XXXX e MENU Selects the menu to be locked unlocked The options are e In Signal Input Signal Menu Level Polarity Delay e In EQ Input EQ Menu e In Name Input Channel Name Menu XD 4080 User s manual Page 22 Out Signal Output Signal Menu Level Polarity Delay Out EQ Output EQ Menu Out Xover Output Crossover Menu Out Limit Output Limit Menu Out Source Output Source Menu Out Name Output Channel Name Menu System System Menu LOCK Selects to lock Yes or unlock No the corresponding menu PASSWORD The password of the XD 4080 is 4 characters in length The user can change it via the PC application software The factory default of a new unit does not require a password XD 4080 User s manual Page 23 7 0 Quick Reference Menu Field y Parameters ZeManicel e lt Cursor gt Min Max Steps Units Level Signal LEVEL 40 15 0 25 dB Polarity Signal POL Delay Signal DELAY 0 21 600 1 21us steps EQ Num
7. program setups A program can be stored using this menu The old program with the same program number will be replaced Once the program is stored in the flash memory it can be recalled at a later time even after power down SYSTEM SETUP MENU Store PROG 1 NAME XXXXXXXXXXXX e PROG Program Number for the current data to be stored e NAME Program Name allows a maximum length of 12 characters XD 4080 User s manual Page 19 Config Device Configuration SYSTEM SETUP MENU Config MODE Stereo 2 Way e MODE configures the mode of operation Mode Out 1 Out2 Out3 Out4 Out5 Out6 Out7 Out 8 None Any Any Any Any Any Any Any Any Stereo 2 Way In1 Int In2 In2 Any Any Any Any Stereo 3 Way In1 Int Int In2 In2 In2 Any Any Stereo 4 Way In1 Ini Ini Int In2 In2 In2 In2 The unit assigns the Input source for the corresponding outputs when the Mode of Configuration is selected The crossover point parameters like the filter type cut off frequency and slope have to be configured manually in the Xover Menu in each Output menu Note The configuration mode configures the input sources when selected The user can change the source afterwards if desired It does not keep the configuration in memory Copy Copy channels SYSTEM SETUP SOURCE In1 TARGET In2 MENU Copy Copy Channels from the source to the target When the Source and Targets
8. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON THE APPARATUS XD 4080 User s manual Page 3 Table of Contents Important Safety INStruCctiONnS ccsseeeeeeeesees Table of Contents sass scssctcenccce seat tyactenessccreereccaceanes 10 MUOGUCON ssis 20 FEAUTES osii 3 0 Front Panel Functions 222 c cccessesseeeeees 4 0 Rear Panel Functions 0 ccccccsesseeeeeeeees 5 0 Powering Up the Device cssessseeeeees 6 0 Operating the Device ccccccesesseeseseeees 6 1 Mput Menus wisccstesdvce cscs edcctesedseauccdiuctideerss 6 2 Output MOMS a ciwvscssssinscisenncaveascnonstanxxmneanenes 6 3 System MeNuS ccccssscsseeeesssessseeeeeeeeeens 7 0 Quick Reference ccccsceeseesessssesseseeees 8 0 PC Control Software cccccesteeeeeeeeeeees 9 0 Specifications ccccsssssseeeeessesseeeeeeeeeesneeeees BWV RN oiaiicrpecdirctcocesececacetesnssestpecestacserananenns XD 4080 User s manual Page 4 1 0 Introduction The XD 4080 is a complete 4 input 8 output digital loudspeaker management system designed for the touring or fixed sound installation markets The absolute latest in available technology is utilized with 40 bit floating point processors and high performance 24 bit Analog Converters The high bit DSP prevents noise and distortion induced by truncation errors of the co
9. Any modification of the data for the selected channel will be applied to the linked channels as well To cancel the linking just press any other Menu key or the Sys key after releasing the held key 6 1 Input menus Each of XD 4080 input channels has a separate Menu key There are 5 menus for each input channel Signal Signal parameters IN_1 XXXXXX MENU Signal LEVEL 0 00dB POL DELAY 0 000 000ms e LEVEL Gain 40 00dB to 15 00dB in 0 25cB steps e POL Polarity can be normal or inverted e DELAY Delay in 10us steps Can be displayed in ms ft or m The time unit of the delay can be changed in the System menu The maximum delay permitted is 62400 steps 650ms XD 4080 User s manual Page 12 EQ EQ parameters IN_1 XXXXXX MENU EQ EQ 1 BW 0 330ct TYPE PEQ Q 4 36 FREQ 1000Hz LVL 0 00dB e EQ Selects one of the 6 available Equalizers e Type Type of EQ The types can be parametric PEQ Lo shelf Lo shf and Hi shelf Hi shf e FREQ EQ center frequency Ranges from 20 to 30 000Hz in either 1Hz steps or 1 86 octave steps The frequency steps can be selected in the System Menu e BW EQ Bandwidth Ranges from 0 02 to 2 50 octaves in steps of 0 01 octave steps for PEQ The Q value is automatically shown beneath the octave value For Lo Slif or Hi Shf it is either 6 or 12dB Oct e LEVEL EQ level gain Ranges from 30 00dB to 15 00dB in 0 25dB steps XOver Crossover
10. XIT FROM THE APPARATUS 11 ONLY USE ATTACHMENTS ACCESSORIES SPECIFIED BY THE MANUFACTURER 12 USE ONLY WITH CART STAND TRIPOD BRACKET OR TABLE SPECIFIED BY THE MANUFACTURER OR SOLD WITH THE APPARATUS WHEN A CART IS USED USE CAUTION WHEN MOVING THE CART APPARATUS TO AVOID INJURY FROM TIP OVER Do not place this unit on an unstable cart stand tripod bracket or table The unit may fall causing serious injury to someone and serious damage to the appliance A unit and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn 13 UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME For added protection for this unit during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the unit due to lightning and power line surges 14 REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL SERVICING IS REQUIRED WHEN THE APPARATUS HAS BEEN DAMAGED IN ANYWAY SUCH AS WHEN THE POWER SUPPLY CORD OR PLUG IS DAMAGED LIQUID HAS BEEN SPILLED OR OBJECTS HAVE FALLEN INTO THE APPARATUS THE APPARATUS HAS BEEN EXPOSED TO RAIN OR MOISTURE DOES NOT OPERATE NORMALLY OR HAS BEEN FROPPED 15 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE 16
11. are both Inputs or Outputs all audio parameters will be copied When one of the Source or the Target is an input while the other is an output only the Level Polarity Delay and EQ are copied e SOURCE Channel to be copied from XD 4080 User s manual Page 20 e TARGET Channel to be copied to General General system parameters SYSTEM SETUP MENU General FREQ MODE All Freq DELAY UNIT 01 e FREQ MODE Selects the frequency control mode for EQ and crossover filters Can be 36 steps octave or All Frequencies 1 Hz resolution e DELAY UNIT ms ft or m Communication Serial Communication parameters SYSTEM SETUP MENU Comm SERIAL PORT RS232 USB BAUD RATE 115200 DEVICE 21 e PORT Select which type of serial communication device to use e BAUD RATE Select the baud rate of the serial communication e DEVICE Assigns the device ID from 1 to 16 This ID is useful when a network of more than 1 unit is present FIR Taps FIR Filter Taps parameters SYSTEM SETUP MENU FIR Taps 1 50 4 50 7 50 2 50 5 50 8 50 3 50 6 50 e 1 to 8 Number of taps for the FIR filter of each output Ranges from 50 to 1200 in 50 tap steps The sum of all taps cannot exceed 1600 XD 4080 User s manual Page 21 I O Mode Input and Output Mode parameters SYSTEM SETUP MENU I O Mode I1 2 Analog I3 4 Analog 01 2 Analog 03 4 Analog 05 6 Analog 07 8 Analog e Select analog or digital signal for
12. ber EQ EQ 1 8 1 EQ Level EQ LEVEL 30 15 0 25 dB EQ Frequency EQ FREQ 20 20 000 1 Hz EQ Bandwidth EQ BW 0 02 2 50 0 01 Octave Crascovediaw XOver ETRL Off Butterworth pai Bessel Crossover Low XOver FRQL 20 20 000 1 Hz Crossover Low XOver SLPL 6 48 6 dB octave l Off Butterworth Linkwitz Riley Crossover High XOver FTRH Bessel FIR Crossover High XOver FRQH 20 20 000 1 Hz Crossover High XOver SLPH 6 48 6 dB octave Limiter Threshold Limit THRESH 20 20 0 5 dBu Limiter Attack Limit ATTACK 0 3 100 0 1 1 ms Limiter Release Limit RELEASE 2 4 8 16 32X Attack time Limiter Ratio Limit RATIO Source Select Source 1 2 3 4 Off 15 0 25 dB Channel Name Ch Name_ NAME 6 characters XD 4080 User s manual Page 24 8 0 PC Control Software The XD 4080 is shipped with a special PC Graphic User Interface GUI application XConsole XConsole gives the user an option to control the XD 4080 unit from a remote PC via the serial communication link The GUI application makes it much easier to control and monitor the device allowing the user to get the whole picture on one screen Programs can be recalled and stored from to PC s hard drive thus expanding the storage to become virtually limitless XD 4080 User s manual Page 25 9 0 Specifications Inputs and Outputs Input Impedance Output Impedance Maximum Level Type Audio Performance Frequency Response Dynamic Range CMMR Crosstalk Distortion gt 10k Ohms 50
13. evels of Security Locks gt RS 232 Interface for PC Control and Configuration gt Future options available XD 4080 User s manual Page 6 3 0 Front Panel Functions 1 RS232 a standard female DB9 socket A straight through cable is required for PC connection 2 USB a standard Type B USB connector Proper device driver must be installed prior to usage 3 Mute keys Mute Unmute input and output channels When an input channel is muted a red LED will come on for indication 4 Gain Menu keys Selects the corresponding channel for the LCD menu display and is acknowledged by a green LED The last modified menu will be displayed on the LCD Linking multiple channels is accomplished by pressing and holding the first channel key then pushing the other desired channels This eases programming for same parameters across multiple channels Multiple Inputs can be linked together and multiple outputs can be linked together Inputs and Outputs are linked separately 5 Peak Level LED Indicates the current peak level of the Signal Signal 12dB 6dB 3dB Over Limit The Input Over LED references to the device s maximum headroom The Output Limit LED references to the threshold of the limiter 6 LCD Shows all the necessary information to control the unit 7 Rotary Thumb Wheel Changes parameter data values The wheel has travel velocity sensing which ease large incremental data XD 4080 User s manual Page 7 modificat
14. he serial number of the product being returned and a copy of the retail sales receipt if possible 3 A complete description of the problem s experienced including a brief description of how the equipment is being used and other equipments involved XD 4080 User s manual Page 28 XD 4080 User Manual v1 00 Jul 2007 XILICA Audio Design www xilica com XD 4080 User s manual Page 29
15. in 1ms steps e RELEASE Release time Can be set at 2X 4X 8X 16X or 32X the attack time e RATIO Compress Ratio Ranges from 1 40 to 40 40 Ch Name Channel Name IN_1 XXXXXX MENU Ch Name NAME XXXXXX e Name Channel name It is 6 characters in length XD 4080 User s manual Page 15 6 2 Output Menus Each output channel of the XD 4080 has a separate menu key There are 6 menus for each output channel Signal Signal parameters OUT_1 XXXXXX MENU Signal LEVEL 0 00dB POL DELAY 0 000 000ms e Refer to the Input Menus for details EQ EQ paramters OUT_1 XXXXXX MENU EQ EQ 1 BW 0 330ct TYPE PEQ Q 4 36 FREQ 1000Hz LVL 0 00dB e Refer to the Input Menus for details XOver Crossover parameters OUT_1 XXXXXX MENU XOver FTRL Off FTRH Off FROL 1000Hz FROL 1000Hz SLPL 24dB SLPH 24dB Refer to the Input Menus for details FIR can be used for output XOver Slope ranges from 6dB to 48dB Slope will not be shown when the filter type is FIR XD 4080 User s manual Page 16 Comp Compressor parameters OUT_1 XXXXXX MENU Comp THRESH 0 0dBu RATIO 1 40 ATTACK 10ms RELEASE 8x 80ms e Refer to the Input Menus for details Limit Limiter parameters OUT_1 XXXXXX MENU Limit THRESH 0 0dBu RATIO 1 40 ATTACK 10ms RELEASE 8x 80ms e THRESH Limit Threshold Ranges from 20 to 20dBu in 0 5dB steps e ATTACK Attack time Ranges from 0
16. ions For modifying delay and frequency 1 Hz resolution pressing the Speed key simultaneously will increment decrement the data value by 100X Menu Control keys There are 6 menu keys lt lt Menu Menu Down Menu gt gt Menu Up lt lt Cursor Cursor Down Cursor gt gt Cursor Up Enter Sys Speed and Exit The functions of each key is explained below lt lt Menu Menu gt gt lt lt Cursor Cursor gt gt Enter Sys Speed Exit Previous menu screen Next menu screen Previous cursor in the menu screen Next cursor in the menu Screen Enter is used only in the System Menu to proceed with selected actions Sys enters the System Menu from the main menu Speed modifies delay and frequency 1 Hz resolution mode data values by 100X Exit to the Main Menu XD 4080 User s manual Page 8 XD 4080 User s manual Page 9 4 0 Rear Panel Functions 1 Main Power Connects via a standard IEC socket A compatible power cord is supplied with the unit The voltage input can be either 115VAC or 230VAC 2 Main Fuse T1A 250V Slow blow type 3 Power switch Controls power On Off 4 Option slot Option slot for future use 5 AES EBU input and outputs A standard DB25 female connector Description Pin Description Pin Input 1 14 Output 3 23 Input 1 2 Output 3 11 Input 2 3 Output 4 12 Input 2 16 Output 4 25 Output 1 20 Ground 14710 Output 1 8
17. lug the unit from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning 7 DO NOT BLOCK ANY VENTILATION OPENINGS Slots and openings in the cabinet back or bottom are provided for ventilation to ensure reliable operation of the limit and to protect it from overheating These openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or similar surface This product should never be placed near or over a radiator or heat source This product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacture s instructions have been adhered to XD 4080 User s manual Page 2 8 DO NOT INSTALL NEAR ANY HEAT SOURCES This Product should be situated away from heat sources such as radiators stoves or other products including amplifiers that produces heat 9 DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED OR GROUNDING TYPE PLUG A Polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prongs are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 PROTECT THE POWER CORD FROM BEING WALKED ON OR PINCHED PARTICULARLY AT PLUGS CONVENIENCE RECEPTACLES AND THE POINT WHERE THEY E
18. mmonly used 24 bit fixed point devices A complete set of parameters include I O levels delay polarity 8 bands of parametric EQ per channel multiple crossover selections and full function limiters Precise frequency control is achieved with its 1 Hz resolution Inputs and outputs can be routed in multiple configurations to meet any requirement The XD 4080 can be controlled or configured in real time on the front panel or with the intuitive PC GUI accessed via the RS 232 or USB interface Software upgrade for CPU and DSP via PC keeps the device current with newly developed algorithms and functions once available Multiple setup storage and system security complete this professional package Shipped contents XD 4080 unit User Manual XConsole Software CD XD 4080 User s manual Page 5 2 0 Features gt 4 Inputs and 8 Outputs with flexible routing gt Digital or Analog Inputs and Outputs gt 40 bit floating point DSP gt 96kHz Sampling Rate Selectable gt High Performance 24 bit A D Converters gt 1 Hz Frequency Resolution gt 8 Parametric Equalizers for each Input and Output gt Multiple Crossover types with Full Function Limiters gt Precise Level Polarity and Delay gt CPU and DSP upgrade via PC gt Individual Channel Buttons with Linking capability gt 4 Line x 32 Character Backlit LCD Display gt Full 5 segment LED s on every Input and Output gt Storage of up to 30 Program Setups gt Multiple L
19. parameters IN_1 XXXXXX MENU XOver FTRL Off FTRH Off FROL 1000Hz FROL 1000Hz SLPL 24dB SLPH 24dB e FTRL Filter Type of low frequency crossover point high pass Types can be Buttwrth Butterworth Link Ri Linkritz Riley Bessel e FRQL Filter cut off Frequency of low frequency crossover point high pass Ranges from 20 to 30 000HZz in either 1Hz steps or 1 36 octave steps The frequency steps can be selected in the System Menu XD 4080 User s manual Page 13 e SLPL Filter Slope of low frequency crossover point high pass Ranges from 6 to 24dB octave in 6dB octave steps If the selected Filter Type is Linkritz Riley the available slopes are 12 or 24 dB octave e FTRH Filter Type of high frequency crossover point low pass e FRQH Filter cut off Frequency of high frequency crossover point low pass e SLPH Filter Slope of high frequency crossover point low pass Filter Low crossover High crossover Configuration point FTRL point FTRH None Off Off Highpass NOT Off Off FTRL Lowpass Off NOT Off a FTRH Bandpass NOT Off NOT Off lAa FTRL FTRH XD 4080 User s manual Page 14 Comp Compressor parameters IN_1 XXXXXX MENU Comp THRESH 0 0dBu RATIO 1 40 ATTACK 10ms RELEASE 8x 80ms e THRESH Limit Threshold Ranges from 20 to 20dBu in 0 5dB steps e ATTACK Attack time Ranges from 0 3 to ims in 0 1ms steps and ranges from 1 to 100ms

XD-4080

Contents

Download Pdf Manuals

Related Search

Related Contents