Model HDV-WTX2 - Extech Instruments
Contents
1. Product sheet A EXTECH INSTRUMENTS A FLIR COMPANY Model HDV WTX2 Wireless Articulating Semi Rigid Probe For use with the HDV600 Borescope only Thank you for purchasing this professional camera probe This sheet covers the warning and specifications for the probe only Instructions regarding the usage of the HDV600 Borescope are provided in the Borescope User Guide Note The camera LEDs become warm when set to maximum intensity I CAUTION For the Articulating Probe do not operate the articulation knob with the probe in a coiled configuration This will damage the articulation controls CAUTION Always return the articulation and tension knobs to the neutral position H before removing the probe from the inspection area Soe TON The label on the probe provides the Serial Number and Part Number in the format F shown below Please do not remove this label otherwise the warranty will be invalid Part No TX1 F MIR flex macro rigid Serial No HDV110001 Warnings Do not bend to a smaller diameter than 10cm 4 Warranty is invalid if stickers tags or labels are removed Articulating Probe Description 1 Articulation knob Articulation tension knob Articulating camera Light intensity buttons Power button AC Adaptor and extension cable sockets Carrying strap PO Or O O Articulation Setup and Orientation The articulation direction and orientation may change if the probe is twisted and coiled d2. n whole or in part in any form Revision 2 1 2 12 www extech com
3. uring use or when stored To re orient the probe 1 Place the extended probe on a flat surface 2 Set the tension F knob to the left or released position 3 Set the articulation knob to the center position with the R A and A L labels in the horizontal position 4 Manually adjust the probe and camera to the zero degree position 5 Rotate the articulation knob clockwise for a 90 bend 6 If necessary manually adjust the probe so that the camera lays flat on the surface with a 90 articulation 7 Rotate the articulation knob counter clockwise and confirm proper ry AL orientation E Charging the Battery The AC charger port and charging status LED are located in the bottom access compartment Connect the charger to the probe and observe the color of the LED Red indicates the battery is charging Green indicates the battery is fully charged Note The rechargeable battery is not user replaceable Specifications Resolution 640 x 480 pixels Length 2m 6 6 Outer diameter O D 6mm 0 02 Battery 3 7V rechargeable Li Polymer Focus distance 2 to 6cm 0 79 to 2 36 Housing Stainless Steel Field of View 60 Number of LEDs 4 Lamp Output Operating Temperature Storage Temperature Warranty 3500 Lux at 20mm 20 to 70 C 4 to 158 F 20 to 70 C 4 to 158 F 1 year Copyright 2011 Extech Instruments Corporation a FLIR company All rights reserved including the right of reproduction i
Download Pdf Manuals
Related Search