eSense - Swissvoice.net
Contents
1. 250 names and numbers in the phonebook on each handset Digits Characters Different characters are printed on each key The entries in the phonebook are sorted alphabetically Key Change from upper case to lower case letters ABC abc Navigation key up Press and hold key to insert a pause inside a phone number P appears Key 0 Insert a space Add new entries in the phonebook Press right softkey __ Select Add Entr and press left softkey __ Enter the desired name number and melody and press left softkey 7 after each input Edit entry Press the navigation key down select the desired entry and press left softkey c Select Edit Entru and press left softkey C Edit the entry and press left softkey _ When pressing the right softkey you can edit the phonebook and you have the following options Search Search an entry in the phonebook Add Entru Copy Phonebk Copy phonebook to another handset Memory Status Display the used and free phonebook memory Del Phonebook Delete the entire phonebook eSense 9 eSense When pressing the navigation key down you open the menu Names and you have the following options Show Details Send Message Send a SMS message Edit Entru Copy Entry Copy entry to another handset Ringtone Select the desired ringtone Delete Entry Fast Call see below Fast Call Phone2. Message Alert A brief beep is heard every time a new SMS message is received Users Your telephone is set to enable all users to access all SMS messages To enable each user to have his own private inbox you can set up 4 specific users with PIN code protection eSense 13 eSense Extending the eSense The delivered handset is already registered on to base station In standby the internal number of the handset is displayed You can register up to 5 handsets to your base station If you register your eSense handset with a third party base station or a third party handset on your eSense base station GAP you may not be able to use some functions or only to a limited extent Register new handsets Registering an additional handset with the main base station the base station you have connected to the telephone network 1 Before registering an additional handset you first need to unregister it from its original base station Press left softkey select Registration and press left softkey c Select be register and press left softkey sz The eSense may now ask for the PIN If so enter the PIN default 0000 and press left softkey Press left softkey again to confirm Your handset is now no longer registered with any base station 2 Preparing the main base station base you have connected to the telephone network for registering additional handsets On the base station
3. a call without pressing any key Key Beep Every time a key is pressed a brief beep is heard PBX Access Cade You may need to enter an access code e g 0 to allow the public exchange to assign an external line for external calls or for calling back numbers in the calls list For further information refer to your PBX operating instructions eSense eSense Set base Press left softkey C _ select Set Lirngs Set base and press left softkey gt Select a function from the list using the navigation key up down and press left softkey C Ringtone Ringer Volume bialllina Made Tone Normal dialling procedure on analog lines Pulse May be required for connecting older telephone systems Please refer to the relevant documentation Rina Prioritu If you have more than one handset registered with you base you can set that one of the handsets will ring first or that all handsets will ring at the same time Recall Mode Set the recall time flash time for the analogue network Select Recall 1 100ms or Recall 2 270 ms First Rina The first ring is suppressed System FIH You can modify the PIN code 0000 on delivery Master Reset Reset of the base station ECO Mode ECO the handset s power transmission is regulated and a radiation reduction is achieved when it is near the base station ECO PLUS Multi Handset ECO Mode Appendix Using Internet cable telephone ad
4. be disconnected unless you move back into range within ten seconds Battery advice Use only the original battery Li lon 3 7 V 550 mAh as well as the original power sup ply 6 5 VDC 300 mA or 7 5 VDC 200 mA The handset operating times standby 150 hours active 10 hours and charging times apply only if the battery is charged to the defined minimum capacity eSense 3 eSense Charging is electronically controlled to ensure optimal charging and care of battery in different charge states Full capacity is achieved only after several charging cycles Note Using other rechargeable battery or non rechargeable battery primary cells can be dangerous and cause malfunctions or damage to the telephone Do not short circuit the battery danger In particular avoid inadvertent short circuits during storage and transport e g bunch of keys metal panels or similar objects and make sure the battery do not come into contact with greasy materials When not in the handset therefore battery should be stored only in insulating packaging Ensure also that the contacts do not touch greasy parts Rechargeable battery can become warm while recharging This is a normal occurrence and is not dangerous Insert the battery The battery compartment is situated in the handset Open the handset cover Insert the battery in the battery compartment Replace the handset cover 4 eSense eSense Connecting the phone
5. call alert End the internal call by pressing the End call key Press the Talk key You are connected to the external party Call transfer to another handset You are conducting an external call and you want to transfer it to another handset Pressthe navigation key right Enter the desired internal number When the internal party responds press the End call key to transfer the call to the other party Brokering Conference You are conducting an external call Call another internal party see above Theinternal party answers Press the navigation key right to switch between the calls Long press the navigation key right to start a conference call If one of the hand sets presses the End call key the other handset will be connected to the external call eSense 15 eSense Set handset 16 Press left softkey select Set tings Set handset and press left softkey gt Select a function from the list using the navigation key up down and press left softkey C Ringtone Select the desired ringtone for internal and external calls Ringer Volume Receiver Vol Handset Hame To better distinguish between handsets you can give each handset a name Language Wallpaper Henu Colour Screensaver Activate or deactivate the clock screensaver Light Timeout Set the display backlight timeout Disp Contrast Auto Talk Just pick up the handset from the base to answer
6. ly and save every setting by pressing the left softkey C In the menu Agenda you have the following options Add Event Show Details Edit Evert Send as a Text Send as a SMS text message Delete Event bel All Everts Set language The language of the display texts can be changed in the menu Settingez 5et Handset Language Telephoning Dialthe desired number using the keypad Press the Talk key CF End the call Press the End call key lt gt 6 eSense eSense Accepting a call Incoming calls are signalled by a ring tone and the caller s number is displayed Press the Talk key Cm and conduct your conversation End the call Press the End call key D Calls cannot be made if the battery is almost discharged or the handset is out of range of the base station Switch ringer off Press and hold the key for approx 3 seconds seconds to switch the ringer off Set speaker loudspeaker volume You can adjust the speaker loudspeaker volume during a conversation Set the desired volume using the navigation key up down Switch handset off Press and hold the End call key approx 5 sec Press and hold again the End call key to reactivate the handset Set alarm Press left softkey 5 select Clock amp Alarm using the navigation key up down and press left softkey 7 Select Alarm using the navigation key up down and press left softkey c Activate
7. the alarm On and select the desired alarm function e g On daily enter the alarm time and press left softkey C The activated alarm is displayed in standby mode by n The alarm sounds for 60 seconds or can be deactivated immediately by pressing any key eSense 7 eSense Keypad lock Activate keypad lock Press approx 3 sec All keys are locked Deactivate keypad lock Press the softkey under Unlock and then press key a Redial The Redial list contains up to 20 entries Press the navigation key up and select the desired entry using the navigation key up down Press the Talk key Edit redial list Open the Redial list select the desired entry and press left softkey You have the following options Show Details Save Humber Add number to the phonebook Send Message Send a SMS message Delete Call PBX operation Your telephone is designed for use in the analogue telephone network and can be operated on a PBX that supports DTMF dialling and flash signalling To enter the R key e g needed to establish a connection press the navigation key left You can adjust the flash recall time for key R see chapter Set base Paging Locate mislaid handsets All registered handsets ring for one minute when the Paging key on the base is pressed To stop the ring press the End call key on the handset or the Paging key on the base 8 eSense eSense Phonebook You can store up to
8. the conformity of the telephone with the above C directive 20 eSense Warranty Certificate voice Warranty Certificate Garantieschein Bon de garantie Certificato di garanzia Garantiebewijs Takuutodistus Garantibevis Garantisedel Garantibevis Certificado de Garant a Tal o de garantia device type Ger tetyp type d appareil tipo di apparecchio toesteltype laitetyyppi maskintype apparattyp apparattype modelo del aparato modelo do aparelho serial number Seriennummer num ro de s rie numero di serie serienummer sarjanumero serienummer serienummer serienummer n mero de serie n mero de s rie dealer s stamp H ndlerstempel sceau du vendeur timbro del rivenditore stempel van de dealer kauppiaan leima forhandlerens stempel f rs ljarens st mpel forhandlerstempel sello del comerciante carimbo do vendedor dealer s signature Unterschrift des Handlers signature du vendeur firma del rivenditore handtekening van de dealer kauppiaan allekirjoitus forhandlerens underskrift f rs ljarens underskrift forhandlers underskrift firma del comerciante assinatura do vendedor date of purchase Kaufdatum date d achat data d acquisto datum van aankoop ostop iv ys kjepsdato datum f r k pet salgsdato fecha de adquisici n data de compra Internet www swissvoice net Swissvoice SA 2011 20406296en ba a0 SV 20406296
9. to a recycling depot By recycling parts or raw materials from used products you will be making an important contribution to environmental protection Please contact your local authority if you require information about collection points in your neighbourhood Disposing of the rechargeable battery By law all used batteries and accumulators must be recycled and not disposed of in domestic waste Please dispose of them according to the official regulations Take them to a recycling depot The batteries accumulators will be recycled since they may for example contain lithium Li nickel cadmium Ni Cd lead Pb cadmium Cd or mercury Hg The batteries and accumulators are labelled with symbols and information on their contents NI CD NI MH 18 eSense eSense Warranty conditions Your telephone is subject to a guarantee from the date of purchase in accordance with the legal provisions of the country in which the telephone was purchased As evidence of the date of purchase please keep the receipt or the warranty card completed by the retailer All defects attributable to material and manufacturing faults will be corrected free of charge within the warranty period either by repairing or replacing the defective equipment The warranty does not cover expendable materials battery cells defects which affect the value or use of the equipment only insignificantly and damage caused by incorrect use ordinary wear and tear or manipula
10. apters on an analog port When using an analog telephone on the analog connection of an Internet or cable telephone adapter not all the described features in particular calling line display may function in the same way as with a standard analog telephone line This does not cause the eSense to malfunction Several factors can cause a failure of specific features to function The Internet cable telephony provider may not provide the function on its Internet cable telephony connection The adapter used to convert Internet cable telephony to analog telephony usually supplied by the provider may not forward the functions to connected telephones or may forward them in a non analog format If this happens please check the eSense on an analog fixed line and or contact your Internet cable telephony provider eSense 17 eSense Care Your telephone is a sophisticated product in terms of design and construction and should therefore be handled with care To clean the telephone wipe first with an antistatic cloth or a damp soft leather cloth and then dry using a dry cloth Recycling environmental protection At the end of the product s life cycle the telephone must not be disposed of in K normal domestic waste Please take it to a collection point for processing electrical and electronic equipment see symbol on the product in the user manual and or packaging Some materials used in this product can be recycled if you take it
11. ebe Mains power socket QO O Telephone line socket Before you can start using your telephone you must plug in the telephone connector cable and the mains cable When the phone is delivered the battery is not yet charged Tocharge the battery insert the handset in the base station The battery will take around 8 hours to fully charge initial charge Set date and time After setting up the telephone first date and time are not set Press left softkey C sz select Clack amp Alarm with the navigation key up down and press left softkey C 7 Select L ate amp Time and press left softkey Ce Enter date and press left softkey Enter the time and press left softkey 2 Set the time format 12 or 24 h and press left softkey C eSense 5 eSense Agenda Your telephone also acts as an appointments reminder You can set 5 different appointment reminders An alarm is played on the handset at the defined time Press left softkey C 7 select Agenda with the navigation key up down and press left softkey Select Add Event and press left softkey Enter a subject set date and time and save every setting by pressing the left softkey C Select Silent the appointment will appear on your display but no alarm tone will sound or select Alarm and Drvechai
12. essages Outbox 12 Press left softkey 5 select Text Messaging and press left softkey c Select lirite Message and press left softkey C Enter the text using the keypad Key 0 Enter a space Key Commutation between upper and lower case ABC abc Abc Press softkey Options Select Send Press left softkey Enter the destination number with the exchange access number or select an entry from the phonebook Press softkey Send When sending a message failed the SMS is stored in the outbox eSense eSense Delete SMS messages To always have enough storage capacity delete regularly messages you have already read You can delete SMS messages from In Outbox from Drafts or all messages at the same time Drafts When writing a SMS message press Options Save to save your text as draft for later use Templates You can store 3 templates to save time when sending text messages that have the same content Text Settings SMS settings Press left softkey select Text Messaging and press left softkey gt Select Text Settings and press left softkey You have the following options Service Centers Before you can send and receive SMS messages SMS service centres for sending an receiving must be programmed Mailbox Ho Assign the number of your personal mailbox Message Size Adjust SMS length Long Message 612 characters Short Message 160 characters
13. n the call list Options in a call list You have the following options Show Details Save Humber Save number in the phonebook Send Message Send SMS message Delete Call eSense 11 eSense Text Messaging SMS You can receive save and send SMS messages with your eSense Your telephone supports SMS messages up to 612 characters in length You can save up to 50 SMS messages When receiving a new SMS message the symbol il is displayed To send and receive SMS messages your telephone line must have active Calling Line Identification Presentation CLIP and activated Connected Line Presentation Make sure these functions are activated on your line Various functions are available depending on the network operator service provider For more information contact your network operator service provider If you receive a call while composing an SMS message the SMS is auto matically saved as a draft You can accept the call and continue composing or sending the SMS message later by selecting Write Message Read new SMS messages Inbox Press left softkey C 5 select Text Messaging and press left softkey c Select Inbox and press left softkey C Select the desired SMS message Press softkey Read You can now read the message Press softkey Options Select a function from the list Press left softkey _ __ and follow the instructions on the display Write and send SMS m
14. numbers from the phonebook can be assigned to numerical keys 1 to 9 Programming fast call keys Press navigation key down select the desired entry and press left softkey c Select Fast Call and press left softkey Ce y Select the desired fast call key and press left softkey Select Hzzian and press left softkey 1 Calling a fast call number To call a fast call number press the corresponding key for approx 3 seconds The pro gramed number is called Calls list The symbol appears when you have new calls The calls list can contain up to 50 entries To use this function the caller s number must be transmitted CLIP Contact your network operator for further information Open calls list Press left softkey 7 select Calls Lists and press left softkey C JL 10 eSense eSense You can now access the following calls lists options Missed Calls Received Calls Dialled Calls Delete Calls Delete all calls in the desired list or delete all calls in all lists Call a number from the calls lists Open the calls list Select the desired list and press left softkey _ _ Select the desired entry using the navigation key up down Press the Talk key CF to call the number or press left softkey _ and select a function from the list If the caller s number is suppressed only l ithheld is displayed The call is not entered i
15. swIssvoice eSense Cordless analogue telephone DECT WITH COLOUR DISPLAY User manual eSense Welcome to Swissvoice The eSense is a cordless telephone designed for connection to an analog telephone network International DECT GAP standard digital technology offers excellent voice quality You can register up to 5 handsets to your base and make internal calls free of charge Please read these operating instructions carefully to familiarise yourself with and take full advantage of the benefits of your new eSense eSense Contents Keys Display symbols Range Location Battery advice Insert the battery Connecting the phone Set date and time Agenda Set language Telephoning Keypad lock Redial PBX operation Paging Locate mislaid handsets Phonebook Fast Call Calls list Text Messaging SMS Extending the eSense Telephoning with several call partners Set handset Set base Appendix eSense eSense o oo oo Oo Om BR N mE ci ck 2i c ee 2x NNOOBRNOO eSense Keys Handset Base a on 10 11 12 13 14 15 1 Earpiece Color display Right softkey Open menu Edit Phonebook Delete Back Left softkey Menu OK Mute microphone Talk key Loudspeaker Handsfree Open redial list Long press to insert a dial pause Increase volume Scroll up in lists and menus Key R Digit keys Star key In standby Long press to activate the ke
16. tion by third parties This warranty does not cover consequential damage caused by the use failure or defectiveness of the product In particular no liability whatsoever is accepted for damage to property and pecuniary loss To claim under this warranty please contact the retailer where you purchased your telephone Warranty information for Germany If the good evinces a defect due to manufacturing or materials faults within 24 months of purchase please send the entire product including accessories and sales receipt to Swissvoice Service Center Im Frauental 14 92224 Amberg The Swissvoice Service Center will replace it with and equivalent good or perform a repair In the case of components subject to wear e g batteries this period lasts for 6 months from the date of purchase Technical Support telephone number Germany For Hotline repairs spare parts technical support and warranty From Monday to Friday from 09 00 AM to 06 00 PM Please call 0180 55 82 888 Euro 0 14 Minute E mail support de swissvoice net eSense 19 eSense Approval and conformity This analog telephone DECT complies with the basic requirements contained in the R amp TTE Directive 1999 5 EC on radio equipment and telecommunications terminal equipment and is suitable for connection and operation in the member state indicated on the base station and or packaging The declaration of conformity may be viewed at www swissvoice net The CE symbol confirms
17. you want to use as the main base station press and hold down the Paging key for around 10 seconds 3 Registering an additional handset Press left softkey C _ select Registration and press left softkey c Select Register HS and press left softkey C Base 1 2 3 dis displayed on the handset Select the main base station default 1 After a few seconds you will be asked to enter the PIN Enter the PIN default 0000 and press left softkey If registration is successful you will hear the dialling tone when you press the Talk key EF and after one minute the handset will go to standby mode Repeat this procedure for every additional handset 14 eSense eSense If the registration is not successful Interrupt power supply of base and handset disconnect power adapter remove battery Repeat the registration procedure Telephoning with several call partners During a call you can make a second internal call enquiry call switch between call partners brokering or simultaneously converse 3 way conference call without the need for two telephone lines Internal conversation Internal call Press the navigation key right and enter the desired internal party If only two handsets are registered pressing the navigation key right will automatically call the other handset If you receive an external call while you are on the phone to an internal call partner you will hear an incoming
18. ypad lock Key 0 Insert a space Microphone Hash key Switches between lower and upper case letters Switches ringer on off Open phonebook Decrease volume Scroll down in lists and menus Internal key End call key Long press to switch handset off Paging key eSense eSense Display symbols Steady on batterie s charge level Flashing batteries have to be charged ES Steady on the caller s list is open Flashing new calls in the caller s list d Li Ringer off Handsfree active Alarm is set Steady on when the handset is near the base Flashes if out of range or ul not registered H Keypad locked Range Location To obtain the best possible range we recommend positioning the telephone in a location central to your sphere of activity Avoid positioning the telephone in niches recesses and behind steel doors The maximum range between base station and handset is approximately 300 meters outdoors Depending on the surrounding conditions as well as spatial and structural factors the range may be smaller Silent zones can occur due to the digital transmis sion in the frequency range used even within the range depending on the structural environment In this case the transmission quality may be reduced through the increased incidence of short breaks in transmission Normal call quality can be restored if you move slightly out of the silent zone If the range is exceeded the call will
Download Pdf Manuals
Related Search