CCTR-809 Asset GPS Tracker User Manual
Contents
1. s ID the ID is print on the battery for example ID is 809201512345678 and then the user name is 2345678 password _4 is 2345678 or 123456 user can change the password 9 iPhone Android App also use the same user name and password with website login downloading amp installation please refer the platform operation guide 10 This tracker can auto download amp configure APN amp GPRS user name amp password if the auto configure is not right the tracker can not upload location to server then you need send SMS to tracker to change the APN amp GPRS manually and send CHECK 123456 to tracker can check the tracker setting call the tracker SIM card supplier to confirm the APN amp GPRS is right please refer Set APN amp GPRS User name and Password in the Locate Operation amp Setting to set APN amp GPRS username and password In the following content all the SMS content is mark by and this is not include in the SMS content it is only to used to mark the SMS content Locate Operation amp Setting 1 Add authorized phone number send SMS ADDPHONE 123456 A phonenumber or 401 123456 A phonenumber to tracker is OK ADDPHONE and 401 are fixed command 123456 is password A is authorized number location every tracker have 3 authorized phone number locations A and B and C so you can set 3 phone numbers phonenumber means the mobile phone number you want2. Send SMS ALARM 123456 to the tracker number ALARM is command 123456 is password the tracker will send back the information of the alarm setting for example Shock Alarm OFF OverSpeed ON 100km h Geo Fence OFF Move Alarm OFF 10 Cancel All Alarm Setting Send SMS CANCELALARM 123456 to tracker CANCELALARM is a command 123456 is password the tracker will send back information Cancel All Alarm Setting and cancel all alarm setting Note RESET and FACTORY also can cancel all alarm setting 11 Set Alarm by Calling ON OFF Send SMS CALLON 123456 Call to authorized number or CALLOFF 123456 No calling to the tracker CALLON or CALLOFF is a command 123456 is the tracker password the tracker will send back the information Alarm by calling ON or Alarm by calling OFF If the alarm by calling is ON then when the alarm is triggered the tracker will call the authorized number to notice the alarm the default setting is ON 12 Set Alarm by SMS ON OFF send SMS SMSON 123456 Sending SMS to authorized number or SMSOFF 123456 No SMS to the tracker SMSON or SMSOFF is a command 123456 is the tracker password the tracker will send back the information Alarm by SMS ON or Alarm by SMS OFF If the alarm by SMS is ON then when the alarm is triggered the tracker will send SMS to the authorized number to notice the alarm th
3. no answered then B and C if 3 authorized all no answered then stop calling If the tracker is triggered continually every authorized phone will receive max 3 alarm SMS per hour The shock alarm SMS is as follow Shock Alarm https maps qgoogle com maps q 22 6 680N 114 15188E Battery 88 send SMS SHOCKALARMOFF 123456 to the tracker SHOCKALARMOFF is command 123456 is password the tracker will send back the information Set Shock Alarm OFF to indicate the operation is success and disable the shock alarm After disable the shock alarm the system will not check shock sensor again Normally this function is used in working mode 2 amp 3 Default the shock alarm is set to off 6 Enable And Disable Overspeed Alarm No Platform Necessary Send SMS OVERSPEEDALARMON 123456 SSS to the tracker number OVERSPEEDALARMON is command 123456 is password SSS is the setting alarm speed unit is km hour The tracker will send back l1 the information Set Overspeed Alarm On SSS km h After enable overspeed alarm the system will check the speed every 5 minutes If the speed is higher than the setting speed the tracker will send alarm and location information by SMS to the authorized phone number A only send to A The authorized phone will receive max 3 alarm SMS per hour one hour later it will be active again The overspeed alarm SMS is as follow Overspeed Alarm Current Speed 110km h Set
4. the place where there is no GPS signal such as underground park indoor room the tracker will reply SMS with CELL ID location to user and the precision is about 50 500m according to the around mobile phone base station density The location SMS is like below click the link the map is same with the above 2 No GPS signal just LBS Cell ID Location http maps google com maps q N40 756441 W73 986378 Battery 91 Note The LBS location precision is not very high in the city maybe 30 50 meters in country side maybe over 300 meters according the GSM base station density So this location only can be used as a reference If the LBS can not locate either the tracker will reply Can not Locate now Please Try Later 5 Arm Shock Alarm by sending SMS No Platform Necessary send SMS SHOCKALARMON 123456 to tracker SHOCKALARMON is command 123456 is password the tracker will send back the information Set Shock Alarm ON to indicate the operation is success and go to arm state if the password is not right the operation is fault the tracker will send back information Wrong Password After go to shock alarm state the system will check shock sensor if the shock sensor is trigger only continuously shock can trigger the shock alarm to avoid trigger by mistake the tracker will send alarm and location information by SMS to the authorized phone number also the tracker will call the authorized number A first if
5. to set if the add operation is success the tracker will send back the information Add Preset Phone Ok if the password is not right the operation is fault the tracker will send back information Wrong Password 2 Check Authorized Phone Number by SMS Send SMS CHECKPHONE 123456 or 400 123456 to the tracker number CHECKPHONE amp 400 are command 123456 is password the tracker will send back the information Authorized Phone A 13987654321 B 13876543210 C 13765432100 the phone number is just an example 3 Delete Authorized Phone Number by SMS Send SMS DELETEPHONE 123456 A or 402 123456 A to the tracker number DELETEPHONE amp 402 are command 1234560 is password A is authorized phone number location there are 3 locations A and B and C if the delete operation is success the tracker will send back the information Delete Authorized Phone Ok 4 Check Tracker Password send SMS CHECKPASSWORD or 500 to the tracker number CHECKPASSWORD amp 500 are command if the operation is success the tracker will send back the information Password 888888 888888 is an example The tracker password is used to protect the tracker only can be operated by owner every SMS command need follow tracker password the default tracker password is 123456 for higher security please change the 5 tracker password this
6. to the tracker number CHECK is the fixed command 123456 is password The tracker will send back information including software version ID S N number IP address authorized phone number GPS and GSM signal etc normally this command is used to test the tracker is working well or not The following is an example 809 V 04 28 2015 CC830 800201412345678 d3 igps info 58 64 155 133 8011 300 A 1398 7654321 B 13876543210 C 13765432101 M1 24 GPS 9 GPSON GSM 95dBm CMNET User Password 460 00 255 1 9376 3613 07 88 809 Product model V 09 28 2015 Software version CC830 Protocol CC800 CC828 CC830 CC630 etc 800201512345678 ID number 58 64 155 133 8011 Server IP amp Port 300 Upload Time Interval A 13987654321 B 13876543210 C 13765432101 Authorized Number 8 M1 24 Working mode 1 24 hours GPS 9 GPS signal Satellite GPSON GPS module is ON GSM 95dBm GSM signal CMNET Current APN User GPRS User Name Password GPRS Password 460 00 255 1 9376 3613 07 GSM Base Station Information MCC MNC TA NUM LAC CID RXLEV LAC2 CID2 RXLEV2 88 Built in Battery Power 13 Re power On amp Reset Tracker Send SMS RESET 123456 to the tracker number RESET is a command 123456 is password The tracker will send back information Reset Tracker and cancel all alarm setting then the tracker will power off and then power on automatically and this command will not cancel user setting
7. use about 10M 30M GPRS data every month install in the tracker please refer the above Before Using 1 2 Install the battery the tracker will power on first time using please put the tracker outdoor for easy get GPS amp GSM signal 3 Check the LED flashing to confirm the tracker work well Refer the above LED Flash Indicator 4 This tracker default working mode is 1 it will upload location one time every 24 hours the other time the tracker is sleep User send SMS to tracker can change the working mode please refer the Set System Working Mode in the Locate Operation amp Setting Change to the other working mode will make the battery time reduce very fast 5 Please add the authorized number otherwise the alarm can not be noticed to user please refer the Add authorized phone number in the Locate Operation amp Setting 6 Geo fence alarm can be set the alarm only can be checked after the tracker weak up and the alarm information will send to user by SMS Please refer Geo fence Alarm in the Locate Operation amp Setting 7 On the platform geo fence and over speed alarm also can be set but this kind of alarm information only can be checked on the platform can not send to mobile phone by sms 8 Visit amp login the tracking platform www 999gps net display current location playback history tracking etc can be operated platform user name and password is the last 7 digital numbers of the tracker
8. 14 Back to Factory Default Configuration send SMS FACTORY 123456 to the tracker number FACTORY is the fixed command 123456 is password The tracker will send back information Set factory setting OK then the tracker will cancel all the alarm setting in the tracker and also delete all the authorized phone number delete the APN and GPRS user name and password change the tracker password to 123456 reset the IP address reset the system working mode and the interval time and so on If the tracker password is forgotten use the authorized the mobile phone can change the password but if no authorized phone is added then user can not reset the tracker to factory mode Senior Operation amp Setting 1 Making a call trigger reply Location Description by Text Platform is not necessary Call the tracker SIM card number after ring 3 times the tracker will hang up the call automatically and locate immediately a few seconds later the tracker will send back SMS with current location text description If the tracker has set the authorized phone number only authorized number calling the tracker can trigger the tracker locate and reply SMS if the other phone number call to the tracker the tracker will hang up the calling immediately without ring amp will not reply SMS The SMS information sample is as follow Call Add to Contacts Gps 10 Address 64 98 Sai Lau Kok Rd Tsuen Wan Hong Kong Lat 22 374013 Lng 114 116428
9. 9 Check Tracker ID The tracker ID is print on the label of the tracker if the label is missing send SMS ID 123456 to tracker in which ID is the fixed command and 123456 is the password The tracker will reply SMS ID 809201512345678 in which 809201512345678 is the ID and every tracker corresponds to the only number This number is used to differ the tracking uploaded to the website from others the last 7 digital number of the tracker ID is the user name and password of the tracker on the tracking platform www 999gps net for example the tracker ID is 809201512345678 and then the user name on the platform of this tracker is 2345678 and the platform password for this user name also is 2345678 user can change the password after login 10 Set APN amp GPRS User name and Password This tracker can download amp configure APN amp GPRS username password automatically after power on if the APN amp GPRS user name password are not right then you need sending SMS to tracker to change them if the tracker can not upload location to platform Red LED flash twice please confirm the auto configuration of APN amp GPRS user name password is right the APN name and GPRS user name amp password please call your tracker SIM card mobile phone company to confirm the auto configuration APN amp GPRS of the tracker please sending SMS CHECK 123456 to the tracker to check if the APN amp GPRS are not right please
10. CCTR 809 Asset GPS Tracker User Manual v1 201510 Welcome to use this asset GPS tracker This product is with GPS module and GSM module it use internal high capacity battery it is not necessary external power supply it will weak up every day by setting time interval normally every day 1 2 times it receive GPS Location outdoor 10 20m precision amp LBS location indoor 50 500m precision and upload the location to internet server and then sleep automatically user login server with given user name amp password can locate the tracker If the tracker break the setting geo fence it will send sms to notice owner the working time can reach 3 5 years it is water proof with strong magnet specially suit for rent machine vehicle instrument engineer sets tracking The tracking website is www 999gps net visiting this website amp login with the given use name amp password the last location will display on the map the default given user name amp password is the last 7 digital of the tracker ID the ID label is on the back of the tracker case using Android App or iOS iPhone App also can tracking the tracker the user name amp password is same with the website scan the following QR code can download amp install app on mobile phone g iPhone App Download Android App Download Scan the following QR code or click the following link can download or read online the manual in Word or Pdf format Word Version http www 999
11. Speed km h 0 Direct 126 54 _Battery 0 N i If the tracker can not get the location text description the tracker will reply the location with Google map link SMS to user please refer the following 3 And If no GPS signal in that place the tracker will locate by LBS Cell ID GSM network base station and reply the LBS location with Google map link please refer the following 4 2 Sending SMS trigger reply Location Text Description SMS Platform is not necessary Send SMS LOCATE 123456 to the tracker also can trigger the tracker locate amp reply SMS with current location text description LOCATE is a command 123456 is password if the password is not right the operation is fault the tracker will send back information Wrong Password The SMS examples is same as above 3 Sending SMS trigger reply Google map link SMS Platform is not necessary Send SMS URL 123456 to the tracker also can trigger the tracker locate amp reply SMS with current location with Google map link URL is a command 1234560 is password if the password is not right the operation is fault the tracker will send back information Wrong Password The SMS examples is same as follow http maps google com maps q N40 756441 W 73 986378 Battery 91 One Times Square P New York NY 10036 10 4 LBS Located GSM network Cell ID Locate When the tracker is triggered to locate if the tracker is in
12. again and so on Under this mode the battery working time can be reached 3 5 years Every day one time Mode 2 Keep working SMS is MODE 123456 2 Under this mode the tracker will powered on all the time if the tracker is moved or is triggered by shock sensor the tracker will locate and upload the location to the server by setting time interval after the tracker stop moving or no shock sensor trigger the tracker will turn off GPS amp GPRS and stop upload location to server at this condition the tracker can receive the sms amp calling The time interval default is 30 seconds and it can be changed by sending SMS INTERVAL 1234568 T T is from 030 to 999 unit is seconds Under this working mode the battery working time will reduce to only about 40 hours Mode 3 Shock Control ON OFF SMS is MODE 123456 3 Under this mode the tracker normally is power off if the tracker is triggered by shock sensor the tracker will power on automatically and then locate and upload the location to the server by setting time interval if no _6 shock sensor trigger the tracker will turn off GPS amp GPRS and stop upload location to server and then power off at this condition the tracker can not receive any sms amp calling The time interval default is 30 seconds and it can be changed by sending SMS INTERVAL 1234568 T T is from 030 to 999 unit is seconds Under this working mode the battery working time w
13. d to our company some small changes may not notice customer if you have any problem please contact us thanks 16
14. e default setting is ON Platform Operation The platform operation please refer the platform operation guide scan the following QR code or click the website link to download the platform manual visit website www 999gps net and click the Manual icon also can download the platform manual ao Platform User Guide Word Version Platform User Guide Word Version Trouble Shooting 1 Please confirm that the SIM card PIN code has been disabled it means if mobile phone use this SIM card it is not necessary to input any password 2 This tracker use 2G GSM network and it upload tracking only through 2G GPRS some 3G amp 4G card have 2G GSM network this kind of SIM card can be used in this tracker 3 The tracking data on our server will Keep 6 12 months the old data will be deleted 4 After power on the tracker call the tracker no response and no ring please confirm the SIM card has been installed properly and the SIM card has enough charge and the mobile phone can work well in that place 5 Ifthe tracker can not upload location to website please confirm the SIM card GPRS function is activated and the APN or GPRS username amp password have been set properly call the mobile phone to confirm the APN amp GPRS username and password 6 If the tracker can not send back information by SMS please confirm the SIM card has ID caller display function and SMS service function and you have set the center or slave center number onl
15. gps org en CCTR 809 GPStracker en V1 doc PDF Version http www 999gps org en CCTR 809 GPStracker en V1 pdf QR Manual Download Word QR Manual Download Pdf Product Picture Battery Function Specification 3 5 Years battery working time 1 2 location Day No installation No power supply Easy using IP67 Water proof can be used in open air 4 low self consuming Li battery 6000mAH App Web Wechat Locate Geo fence alarm can be set User change working mode by sms GPS LBS can be used indoor locate Universal 4 Band GSM module Suit for personal or vehicle tracking Note 1 The tracker will power on automatically after the battery is installed 2 Please install GSM SIM card before install battery 3 The SIM card need enable GPRS internet data service every locating data cost is lower than 1K byte every day 1 2 locating will cost 60K byte every month the lowest data package is suit for suing LED Flash Indicator Green Power LED Flash once working well Green Power LED Flash twice GSM working well and GPS signal weak Green Power LED Flash three times GSM and GPS working well but battery is low Green Power LED Flash four times GSM working well battery low amp no GPS signal Green Power LED ON continuously GSM Searching network Green Power LED OFF continuously Power off Red GSM LED Flash once Upload location to server OK Red GSM LED Flash twice Upload loca
16. holder are same direction all the batteries are parallel connection please see the and indicator in the battery holder the tracker will power on automatically the tracker will power on 5 minutes and then go to sleep after the setting time interval default is 24 hours the tracker will power on again and upload the location and sleep again and so on Only uninstall the battery can power off the tracker all the time 3 Battery Low Alarm When the battery voltage in the tracker is too low the tracker GREEN LED will send battery low alarm information to authorized number automatically Note This battery is not rechargeable battery it can not be recharged 4 Back to Factory Setting Default Setting sending SMS FACTORY 123456 to the tracker SIM card number the tracker the tracker will delete all the user setting authorized number Alarm setting Password APN Working mode etc reset to factory default setting and then re power on 5 Antenna The Antenna of GSM and GPS are built in the tracker Pleas leave the tracker away from big metal this will reduce the GSM and GPS signal 6 Using Condition The working temperature is 20 C to 60 C over this range the specification of the tracker maybe can not reach the standard level the storage temperature can reach to 40 C to 80 C Simply Using Step 1 First to buy a 2G GSM phone SIM card and enable GPRS service order a data package Normally will
17. ill reduce to only about 40 hours 7 Set Upload Interval Time Send SMS INTERVAL 123456 T to the tracker INTERVAL is command 123456 is password T is the interval time from 30 to 999 unit is seconds The tracker will send back information Set Interval time T OK if the password is not right the operation is fault the tracker will send back information Wrong Password 30 seconds is the default interval time Longer upload interval time can save battery and GPRS data cost the total mileage on the platform will have big error if the interval time is bigger than 30 seconds 8 Start Stop Upload Location to Server by SMS This command is only suit for working mode 2 amp 3 send SMS STOP 123456 to the tracker STOP is command 1234560 is password The tracker will send back information Stop upload location to server if the password is not right the operation is fault the tracker will send back information Wrong Password After receive this command the tracker will stop upload location to server under working mode 2 amp 3 send SMS START 123456 to the tracker START is command 123456 is password The tracker will send back information Start upload location to server if the password is not right the operation is fault the tracker will send back information Wrong Password The tracker default will upload location to server under working mode 2 amp 3
18. password is different with the tracking platform login password Note Only The authorized phone can check the password 5 Change Tracker Password Send SMS CHANGEPASSWORD 123456 888888 to the tracker number CHANGEPASSWORD is command 123456 is old password 888888 is new password if the operation is success the tracker will send the information New Password 888888 to every preset phone number Note Only the authorized phone can change the password 6 Set System Working Mode This Tracker has 3 working mode mode 1 is timing on off default factory mode mode 2 is keep working mode 3 is shock control Sending SMS MODE 123456 X Y to the tracker MODE is command 123456 is the tracker password X is the working mode it is 1 or 3 Y is the sleep time interval from 01 99 unit is hour only when the X is 1 the Y is available other wise there is no Y when the X is 2 or 3 the SMS will be MODE 123456 X after receive the command the tracker will reply SMS Working mode set to X 1 Timing on off 2 keep working 3 shock control The working modes are described below Mode 1 Factory Default Mode Timing ON Off Mode SMS is MODE 123456 1 24 This mode is the default working mode under this mode the tracker normally is powered off the tracker will power on automatically every 24 hours and then upload the the current location to server and then go to sleep
19. rcle or not in working mode 1 only after the tracker weak up it will check the geo fence alarm if the tracker is out of the geo fence circle the tracker will send out geo fence alarm information to all authorized number The geo fence alarm SMS is as follow Break Geofence Alarm httos maps google com maps q 22 6 7680N 114 15188E Battery 88 8 Move Alarm No Platform Necessary The move alarm is a geo fence alarm with 500 meters radius and current location center it is similar with geo fence alarm Send SMS MOVEALARMON 123456 to the tracker number MOVEALARMON is command 123456 ee is password After receive the command the tracker will locate immediately after located the tracker will set current location as the geo fence center and 500 meters as the geo fence radius unit is meters the tracker will send back the information Move Alarm On if the tracker can not locate the tracker will reply Can not locate Set Move Alarm Fail After set the move alarm the tracker will locate every 5 minutes to check the tracker is in the 500 meters geo fence circle or not in working mode 1 only after the tracker weak up it will check the move alarm if the tracker is out of the geo fence circle the tracker will send out move alarm information to all authorized number The move alarm SMS is as follow Move Alarm https maps google com maps q 22 6 7680N 114 15188E Battery 88 9 Check Alarm Setting
20. set by the following description Send SMS APN 123456 apnname to the tracker in which APN is the fixed command 123456 is the password and apnname is the APN name of a mobile phone company Having successfully been made there will be a SMS APN apnname Send SMS USERNAME 123456 username password to the tracker USERNAME is a command 1234560 is the password of the tracker username is the mobile company GPRS user name password is the mobile company GPRS password if the operation is success the tracker will send back the information Username username Password password if the password is not right the operation is fault the tracker will send back information Wrong Password 11 Set Website Server IP address The tracker IP address has been set to default 58 64 155 133 8011 in factory For normally this is not necessary to change If our server IP is changed we will notice on the website But if you need upload location to your own server send SMS IP 123456 100 101 102 103 8888 or IP 123456 www yourdomain com 8888 to the tracker in which IP is the fixed command 1234560 is the password and 100 101 102 103 8888 or www yourdomain com 8888 is the IP address or domain name amp port of the your own server Having successfully been set there will be a SMS IP 100 101 102 103 8888 12 Check Tracker Setting send SMS CHECK 123456
21. ting 100km h Battery 88 send SMS OVERSPEEDALARMOFF 123456 to the tracker will disable the over speed alarm setting OVERSPEEDALARMOFF is command 123456 is tracker password the tracker will send back the information Set Overspeed Alarm Off Normally this function is used in working mode 2 amp 3 Default the over speed alarm is set to off 7 Break Geo fence Alarm No Platform Necessary The geo fence is a circle area on the map the center of the circle is set by tracker current location If the tracker can not located by GPS then the setting geo fence command fail and the radius is set by SMS When the tracker move out the area the tracker will send alarm information to user by SMS send SMS GEOFENCEALARMON 123456 RRR to the tracker number GEOFENALARMON is command 123456 is password RRR is the radius of the geo fence circle the center of the circle is the tracker current location unit is km it is from 001 to 999 After receive the command the tracker will locate immediately after located the tracker will set current location as the geo fence center and RRR as the geo fence radius unit is km the tracker will send back the information Geofence A Alarm On RRRkm if the tracker can not locate the tracker will reply Can not locate Set Geofence Alarm Fail After set the geo fence alarm the tracker will locate every 5 minutes to check the tracker is in the geo fence ci
22. tion to server Fail Before Using 1 Install SIM card Buy a GSM SIM card which have SMS service and incoming caller ID service amp GPRS data service in which the SIM card phone number is the very tracker number and all the operation for the tracker is to this number such as locating immediately add amp delete preset number change password set alarm etc Note this tracker use 2G GSM network some 3G amp 4G SIM card have 2G GSM network these kind of 3G amp 4G SIM card can be used in this tracker some SIM card need send SMS to active the GPRS data service Every month need about 10M 30M GPRS data according the different working mode order an data package can save money Open the case with screw driver the battery holder amp PCB can be seen the SIM card holder is on the PCB board pull the metal cover to OPEN direction the metal cover can be opened put the SIM card into the the holder Pay attention to that the SIM card metal pin need face to the PCB and push the metal cover to LOCK direction a click sound can be heard to indicate that the SIM card has been locked Note Before install or uninstall the SIM card please uninstall the battery i r F O Q 4 od o0 ll 20 J Zz A 4 prsrcs Mi i i N 7 Ss ul S wo w We O Sc O Sc N w u 2 Power ON OFF When the battery is installed in the tracker Please note all the battery in the battery
23. y center or slave center number can send SMS and please read the SMS information of the tracker sending back and check the instruction amp password is right or not 7 Can not login the platform use SMS to check the ID of the tracker and try it again if not success please contact distributor to reset password 8 After go out the under ground park some tracking maybe lost the GSM and GPS module will take a few minutes to receive signal and re locate some tracking maybe lost this is normal 9 Some time some location point is lost this is normal in the transmit process some point maybe is lost but this will not happen very often 14 Specification GSM Frequency 850 900 1800 1900Mhz 4 Band Packing List Tracker amp Platform Manual CD or Print Battery CR123A Panasonic Warranty This system has been tested before sold We strongly recommend you to get this system installed by professional There is a one year warranty except the following condition 1 Installed fixed or changed by personally or unprofessional 2 Warranty will eliminate if the ownership of the tracker has been changed 3 Parts damaged by man made 4 Battery adapter wires etc Warning this device is just a auxiliary product that applying the location of current object we have not any responsibility if you have damage or lost in using this tracker owner 15 Distributor Notes The explanation of this manual is belonge
Download Pdf Manuals
Related Search