Electronic Viewfinder
Contents
1. MOUNT e BATTERY LOCK LOCK li BUTTON DEBUG in ll CAMERA CALIBRATION MOUNT SDIIN OUT HDMI IN OUT PGM EXTERNAL Firmware Update POWER 8 Electronic Viewfinder 4 Control amp Functions e F1 SCAN Button This Functions button is used to activate the feature selected in DISPLAY amp SET F1 Key menu Default setting of F1 Button is Scan Mode e F2 ASPECT Button This Functions button is used to activate the feature selected in DISPLAY amp SET F2 Key menu Default setting of F2 Button is Aspect e F3 MARKER Button This Functions button is used to activate the feature selected in DISPLAY amp SET F3 Key menu Default setting of F3 Button is Marker Enable e F4 L Y ZoneCheck Button This Functions button is used to activate the feature selected in DISPLAY amp SET F4 Key menu Default setting of F4 Button is L Y Zone Check e MENU lt EXIT gt SOURCE Button Press the button for less than 2 seconds to activate the main OSD menu Used to return from sub menu to main menu Press the button for more than 2 seconds to change the Input Signal SDI lt gt HDMI SDI HDMI e UP DOWN ENTER Rotary Control When OSD menu is inactivated press the Rotary Control to adjust the value of Brightness Contrast Chroma or Aperture Also the Rotary Control is used to decrease or increase the value of th2. Alphatron Broadcast Electronics FOR MORE INFORMATION PLEASE VISIT www alphatron tv Spoorhaven 78 2651 AV Berkel en Rodenrijs The Netherlands TEL 31 10 514 0680 FAX 31 10 514 0699 E mail info abe nl
3. e Peak Decay Time Sets the reduction time for max value indication of audio signals Control range is from MIN 0 to MAX 100 Bigger number means a longer display time for max value Electronic Viewfinder 19 6 Menu Operations DISPLAY amp SET System Defauit No Back Light 0 Int Patern off Time Code off Focus Assist OE F A Color Red F A Level 0 F1 Key ScanMode F2 Key Aspect F3 Key Marker Enable F4 Key L Y ZoneCheck e System Default Used to initialize OSD values to factory default e Back Light Used to indicate the backlight level In case of System Default the value returns to factory default after color calibration Available values are from 0 to 100 e Int Pattern Internal Pattern Generates ColorBar Pluge and Grayscale Pattern internally Selectable range for Gray Pattern is from 096 to 10096 with 596 increment See section 7 Other Functions 6 Iternal Pattern for more information eTime Code Used to display the Time Code Available modes are VITC LTC and OFF e Focus Assist Focus Assist helps the shooters to easily find outthe exact area in the picture with good focus simply by adding colors on the shape or boundaries of the object in the picture Available modes are Mono and Color See section 7 Other Functions gt 4 Focus Assist for more information 20 Electronic Viewfinder e F A COLOR Used to select a color for FOCUS ASSIST among red gre
4. 100 to 100 eChroma Used to set the saturation level from 50 to 50 e Aperture Sharpness Used to set the sharpness level from 25 to 25 eScan Mode Used to change the Scan mode Scroll up and down the Rotary Control and the mode will be changed as the following sequence Over Scan gt Zero Scan gt User gt Pixel To Pixel See section 6 Other Functions gt 1 Pixel to Pixel and 2 User Aspect for more information e ASPECT Used to change Aspect Ratio The Aspect Modes are changed as the following sequence 4 3 16 9 15 9 1 85 1 2 35 1 When the original Aspect ratio of the Input Signal is 16 9 the Aspect Mode is fixed as 16 9 e3G Format Used to select 3G SDI A B input format among NORMAL MODE AUTO A 422 10BIT_ YCbCr 50 60P A 444 10 12BIT_YCbCr A 444 10 12BIT_RGB A 422 12BIT_YCbCr B 444 10 12BIT_YCbCr B 444 10 12BIT_RGB B 422 12BIT_YCbCr B 422 10BIT_YCbCr 50 60P In NORMAL MODE automatically detected when Payload signal is contained e DSLR Camera Select the DSLR camera to be used with EVF 035W 3G Available models are CANON 5D 7D SONY A77 and NIKON D7000 D4 D800 DSLR cameras screen size and aspect ratio of Live Record Playback modes vary according to their manufacturer e DSLR SCALE HDMI Format Only This is a special function for CANON NIKON SONY DSLR cameras Used to scale the image with different resolution as to th
5. Do not use liquid cleaners or aerosol cleaners Caution e Unplug the power cord from the AC outlet if you do not use the product for considerably long time Do not use the product near water such as bathtub washbasin kitchen sink and laundry tub swimming pool and in a wet basement e Keep the product away from direct rays of the Sun light e Do not place the product on an unstable cart stand tripod ortable Placing the product on an unstable base can cause the product to fall resulting in serious personal injuries as well as damage to the product Use only a cart stand tripod bracket or table recommended by the manufacturer or sold with the product When mounting the product on a wall be sure to follow the manufacturer s instruction Use only the mounting hardware recommended by the manufacturer When relocating the product placed on a cart it must be moved with the utmost care e Sudden stops excessive force and uneven floor surface can cause the product to fall from the cart The vents and other openings in the cabinet are designed for ventilation Do not cover or block these vents and openings since insufficient ventilation can cause overheating and or shorten the life of the product Do not place the product on a bed sofa rug or other similar surface since they can block ventilation openings This product is not designed for built in installation do not place the product in an enclosed place
6. Error OFF Range Error ON Focus Assist ON 24 Electronic Viewfinder 7 Other Functions 6 Internal Pattem 000000000 e Displays internally generated test patterns eThe pattern consists of ColorBar and Pluge Grayscale Patterns Full screen colors of various gray levels 0 100 are also embedded lt Color Bar Pluge Pattern gt lt Gray Pattern gt Electronic Viewfinder 25 7 Other Functions e This function is designed for some DSLR cameras Canon 5D 7D and Nikon D7000 D4 D800 that output different resolution from the operation mode Playback Live REC Full Live REC 16 9 e Select the Camera model in the Picture DSLR Camera menu CANON e In StandBy mode of Canon 5D Mark ll 10801 of HD resolution is indicated However real output resolution is 1620x1080 so blank area is displayed on the screen because the 16 9 aspect ratio is not realized eIn this case use DSLR SCALE function to enlarge the 1620x1080 image and display full screen In Recording mode of CANON 5D Mark Il the output resolution is SD 480p e Although it is SD the real output resolution is 640x390 not 720x480 e DSLR SCALE function scales the 640x390 image to 960x640 panel resolution and display full screen Note 1 When you compare the circle chart or the camera shooting chart with DSLR connected monitor HDMI and HDMI to SDI Conversion connected monitor The function of Live Rec 16 9 mod
7. Menu Operations e Waveform Adjust Waveform and Vectorscope functions Activates in order of Off Waveform Vector Waveform Wide 1 Waveform Wide 2 lt Waveform Wide 2 gt eW F Intensity Controls the brightness of the WAVEFORM VECTOR display Available values are between 0 30 The higher the number the brighter the waveform will be eW F Trans Controls the transparency level of the WAVEFORM VECTOR Available values are OPAQUE and TRANS AUDIO Level Meter off Lv Meter Disp Pair Lv Meter Ref 18dB Lv Meter Size Small Peak Decay Time 0 e Level Meter Used to set the Level Meter for the embedded audio Available options are OFF 16 CH HOR and 16 CH VER 16 CH HOR Displays 8 channels on top left and 8 channels on top right of the screen horizontally 16 CH VER Displays 8 channels on center left and 8 channels on top right of the screen vertically e Lv Meter Disp Level Meter Display Used to set the display method for audio level meter Available modes are GROUP and PAIR eLv Meter Ref Level Meter Reference Display the default audio level meter value Available options are 18dB and 20dB Audio level meter within selected value turns to green and exceeded audio level is displayed in yellow Audio level exceeding 4dB is displayed in red e Level Meter Size Used to control the size of the audio level meters Available options are NORMAL and LAGRE
8. V2 640 e Marker Enable Used to activate the Marker function Available marker types are OFF 16 9 4 3 4 3 ON AIR 15 9 14 9 13 9 1 85 1 2 35 1 1 85 1 amp 4 3 and USER e Marker Type Used to select the marker type Available marker types are OFF 16 9 4 3 4 3 ON AIR 15 9 14 9 13 9 1 85 1 2 35 1 1 85 1 amp 4 3 and USER e Center Marker Displays the Center Marker on the screen e Safety Area Used to select to display and controls the size and availability of the Safety Area Available sizes are 80 85 88 90 93 100 EBU ACTION 16 9 EBU GRAPHIC 16 9 EBU ACTION 14 9 EBU GRAPHIC 14 9 EBU ACTION 4 3 and EBU GRAPHIC 4 3 MARKER 24 3 SAFETY AREA 90 FIT MARKER OFF MARKER 24 3 SAFETY AREA 90 FIT MARKER ON e Fit Marker Used to activate or inactivate the Fit Marker function When the Marker type is selected in the Marker menu a border line of the Safety Area will be displayed inside the Marker Images below show the difference between Fit Marker ON and OFF e Marker Mat Used to set the darkeness level outside of the MARKER area from OFF transparent to 7 Black The bigger the value the darker the color e Marker Color Used to set the color of the MARKER lines Available colors are white gray black red green and blue eThickness Used to set the thickness of the MARKER lines Thickness level is from 1 to 7 by the pixel unit e USER Marker H1
9. designed for better performance in setting the exposure of performance in setting the exposure of lighting when shooting with vDSLR cameras lighting when shooting with vDSLR cameras lt Luma Zone Check ON Zebra Pattern Type Luma Y ZoneOn 68 lt Luma Zone Check ON_Color Pattern Type gt Electronic Viewfinder 23 7 Other Functions 4 Focus Assist 5 Range Error gt Focus Assist function assigns a color to the e Pixels with Y or C levels exceeding the pixels in the shape or boundary area of the designated levels of Y MAX Y MIN C MAX image to inform the user to make the best and C MIN shall blink focus eAnalyzes the input signal s Luma Y and e With this function user can easily differenciate chroma information C and if the input the focused area from out focused area signal exceeds the designated minimum value especially shooting with shallow depth of field and maximum value the pixel shall blink This function is to help the user to easily find out e Available types are Mono and Color types any unwanted level of signals and for better Mono Background image is mono type exposure setting Color Background image is original color type e When you activate the Focus assist with hot key press the Knob button before the information window left bottom to disappear Then Focus Assist level adjustment window appears and the Foucs Assist level can be adjusted with the Knob button Range
10. such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions are followed e The LCD panel used in this product is made of glass Therefore it can break when the product is dropped or applied with impact Be careful not to be injured by broken glass pieces in case the LCD panel breaks e Keep the product away from heat sources such as radiators heaters stoves and other heat generating products including amplifiers Risk of explosion if battery is replaced by and incorrect type Dispose of used batteries according to the instructions The magnification lens in the viewfinder may also magnify tiny dusts on the LCD screen which may look like defects of the LCD panel Please wipe out or blow off the dusts on the screen before using the EVF 035W 3G e To avoid scratches on the LCD screen please only blow off the dust and don t use a cloth or fingers to clean the screen Electronic Viewfinder 5 7 ab e N 6 Electronic Viewfinder 3 Main Features e SDI signal compatibility This product is compatible with various SDI signals SD HD 3G A B SDI 480i 576i 1080i 1080p 1080psf e HDMI signal compatibility Supports HDMI w HDCP input is available without any other accessory e HDMI To HDMI Active Loop Throughout Supports HDMI To HDMI Active Loop Throughout function e Compact and powerful Compact size for best space uti
11. when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential to correct the interference at his own expense CAUTION Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user s authority to operate the equipment Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This symbol on the product or on its packing indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this productis disposed of correctly you will help prevent potential negative consequence for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural resources Electronic Viewfinder 3 1 Caution Always use set voltage DC 6 8 12V D tap to mini XLR connection All operating instructions must be read and understood before the product is operated These safety and operating instructions must be kept in safe place for fu
12. Used to set the position of the first horizontal marker line Displayed when MARKER menu is set to USER e USER Marker H2 Used to set the position of the second horizontal marker line Displayed when MARKER menu is set to USER e USER Marker V1 Used to set the position of the first vertical marker line Displayed when MARKER menu is set to USER e USER Marker V2 Used to set the position of the second vertical marker line Displayed when MARKER menu is set to USER Electronic Viewfinder 17 WAVEFORM ERROR CHECK L Y Zone Check Off L Y Zone Adj 755 Range Error Off Y Max 255 YA Min 0 C Max 255 C Min 0 Pic Blink Off C Pic Blink Off Waveform Off W F Intensity 0 W F Trans Opaque eL Y Zone Check Luma Zone Check Displays the Luma Y level of the input image with specific colors Each pixel s Y is analyzed and changed to a specific color according to the Index on the right side of the screen See section 6 Other Function 3 L Y Zone Check for more information When a pixel s Y level is under 0 16 the color diagonal line will be colored Green When the pixel s Y level is over 10096 235 the color diagonal line will be colored Red When the Y level of a pixel is between 0 100 the pixel is displayed with Gray except for selected Luma Zone A 5 zone of the selected Y level will be colored Pink 596 and 10 will be colored Yellow 1096 from Pink a
13. WARNING Thank you for the purchase of the Alphatron EVF 035W 3G EVF Electronic Viewfinder We have heard a few instances of burned in images on the LCD panel and wanted to send the following precautionary information to make sure this does not happen to your unit Caution The LCD panel can potentially be damaged by sunlight or other bright light sources entering the viewfinder and being intensified by the lens To avoid damage simply rotate the silver ring directly behind the eyecup to engage the capping shutter and prevent light from entering the eyepiece As long as you close the capping shutter you should not have this problem Electronic Viewfinder Operation Manual_v2 4 EVF 035W 3G Alphatron Broadcast Electronics 4 Caution eei cni ens Q Components mmm m HH mee OG PAT oes e Pc ech c 7 A Controls amp Functions ss QQ 5 Menu Tree amp Adjustment etern 10 6 Menu Operations mmm HIR 15 1 Picture eeen 15 2 Color mm mm IH HH I eee 16 3 Marker nmm mm mem een 17 4 Waveform amp Error Check 18 6 Display amp Set mH HIR 20 7 System m en een 21 7 92 8 Product Specifications 27 9 Warranty Registration mH HH 28 FCC Federal Communications Commission This equipment has been tested and found to comply with the limits for class A digital device pursuantto part 15 ofthe FCC Rules These limits are designed to provide reasonable protection against harmful interface
14. e operation mode Playback Live REC Full Live REC 16 9 of the camera to fullfill the screen See section 7 Other Functions 7 DSLR SCALE for more information e Rotary Lock Locks the Rotary control Electronic Viewfinder 15 Color Temp 6500K Gain Red Gain Green 0 Gain Blue 0 Bias Red 0 Bias Green 0 Bias Blue 0 Color Copy 6500K e Color Temp Controls color temperature and allows instant access to preset color temperature settings Available color temperatures are 3200K 5600K 6500K 9300K and User 1 2 3 In User 1 2 3 modes user can define custom RGB GAIN and BIAS Offset values e Gain Red Green Blue Used to set R G B Gain or Picture Contrast level from 128 to 127 Only available in User 1 2 3 mode e Bias Red Green Blue Used to set R G B Bias or Offset mainly affects on Black level from 127 to 127 Only available in User 1 2 3 mode 16 Electronic Viewfinder e Color Copy Used to copy the R G B Gain value of pre stored color temperature settings In User mode find and select the color temperature and press Enter button to copy and apply the Gain value to GAIN RED GAIN GREEN GAIN BLUE Only available in User 1 2 3 mode 6 Menu Operations MARKER Marker Enable off Marker Type off Center Marker off Safety Area off Fit Marker off Marker Mat off Marker Color White Thickness al User Marker H1 ail User Marker H2 960 User Marker V1 al User Marker
15. e selected feature e Debug Phone Jack Factory uses only e PGM USB Port This terminal is for firmware upgrade or color calibration by using the Tool made by TVLogic e SDI IN BNC Signal input terminal for SD HD SDI e SDI OUT BNC SD HD SDI Signal Output which is input through SDI IN terminal e HDMI IN Signal input terminal for HDMI signal e HDMI OUT Signal output terminal for HDMI signal e BATTERY IN Battery Power Input DC 6 8 12V Rated Power Input DC 6 8 18V D Tap to mini XLR connection e DC POWER IN Mini XLR 4P DC power input terminal for DC 12V t lt Warning gt When using the product make sure to ground the product before connecting the input signal line The unit may not operate properly if the input line is connected before the GND is connected Electronic Viewfinder 9 5 Menu Tree amp Adjustme e OSD On Screen Display Menu helps you use various functions e This Picture is the menu structure for EVF 035W 3G PICTURE Brightness 0 Contrast 0 Chroma 0 Aperture 0 Scan Mode Over Aspect 16 9 3G Format Normal DSLR Camera CANON 5D 7D DSLR Scale Playback Rotary Lock Unlock e User may control various functions using MENU button and the Rotary Control on the side of the monitor 10 Electronic Viewfinder 1 Press MENU button to activate the OSD menu 2 Move to a desired menu by rotating the rotary control Press the Rotary C
16. e should be selected to compare circle and it is equal to its actual If the circle is compared in Live Rec Full mode the output of the circle is deformed 2 Both EVF 035W 3G connected DSLR and EVF 035W 3G connected HDMI to SDI Conversion should be compared to cirlce in Zeroscan mode It is deformed if user selects in Overscan and Underscan mode 26 Electronic Viewfinder W NIKON D7000 e In StandBy Record mode of NIKON actual resolution of the output signal from HDMI terminal is 952x634 failing to display 16 9 aspect ratio and making marginal blank area Activating DSLR SCALE function will scale the 952x634 raster image to fill the full screen NIKON D4 D800 e In StandBy Record mode of NIKON D4 D800 actual resolution of the output signal from HDMI terminal is 1440x810 960x540 StandBy Record Activating DSLR SCALE function will scale the 1440x810 960x540 raster image to fill the full screen SONY e In StandBy Record mode of SONY actual resolution of the output signal from HDMI terminalis 1440x810 Activating DSLR SCALE function will scale the 1440x810 raster image to fill the full screen lt DSLR Scale OFF gt lt DSLR Scale ON gt 8 Product cifications EVF 035W 3G 54 60 X 640 0 078 H X 0 078 W mm 24 bits R8 G8 B8 160 H 160 V SO0cd m 74 88 H X 49 92 V mm SDI Channel Input Input Connector HDMI Input SDI Channel Active Loop Through Out Output HDMI Channel Ac
17. e the position and adjust the size before the message window disappears e If the message window disappears resizing menu is not available Then activate the User mode again and adjust the position and size by using the Rotary Control e Available range H Size 480 960 V Size 320 640 7 Other Functions Blumay ZoneCheck 0000000000 W Color Pattern Type W Zebra Pattern Type e Displays the Luma Y level of the input image e Displays the pixels with designated Luma Y in colors levels with zebra pattern eY gt 100 Pixels with higher Y level than 100 eY gt 100 Pixels with Y level over 100 turn turn to red to red diagonal line e Y gt 0 Pixels with lower Y level than 0 turn eY gt 0 Pixels with Y level under 096 turn to to green green diagonal line e Pixels with Y levels designated by the user are e User defined Y levels are displayed as black displayed as following colors yellow pink cyan diagonal line e Factory Default Y Border line between pink e Factory Default Y level is 70 and the pixels and yellow level is 7596 and pink color is with Y level from 6596 to 7596 is displayed assigned to pixels with Y level from 7096 to 7596 with zebra pattern e Yellow color is assigned to pixels with Y level e Pixels with 1096 of Y level is displayed as black from 7596 to 8596 and Cyan from 6096 to 7096 diagonal line eThis function is designed for better This function is
18. ectronic Viewfinder e If any of the following conditions occurs unplug the power cord from the DC outlet and request a qualified service person to perform repairs a When the power cord or plug is damaged b When a liquid was spilled on the product or when objects have fallen into the product c When the product has been exposed to rain or water d When the product does not operate properly as described in the operating instructions Do not touch the controls other than those described in the operating instructions Improper adjustment of controls not described in the instructions can cause damage which often requires extensive adjustment work by a qualified technician e When the product has been dropped or damaged f When the product displays an abnormal condition Any noticeable abnormality in the product indicates that the product needs servicing e In case the product needs replacement parts make sure that the service person uses replacement parts specified by the manufacturer or those with the same characteristics and performance asthe original parts Use of unauthorized parts can result in fire electric shock and or other danger e Upon completion of service or repair work request the service technician to perform safety checks to ensure that the product is in proper operating condition 1 e Unplug the power cord from the DC outlet before cleaning the product Use a damp cloth to clean the product
19. en and blue e F A LEVEL Used to set the edge difference value between the edges in an image Available values are from 0 to 100 Larger value means more sophisticated detail detection Designated color is displayed when the difference of the edges exceeds the previously set value This feature is available only when the FOCUS ASSIST mode is activated e F1 Key User can select the function for F1 Key Selectable Items Scan Mode Aspect Marker Enable L Y Zone Check Range Error Audio Level Meter Time Code Focus Assist BLUE ONLY DSLR Scale and Off e F2 Key User can select the function for F2 Key Selectable Items Scan Mode Aspect Marker Enable L Y Zone Check Range Error Audio Level Meter Time Code Focus Assist BLUE ONLY DSLR Scale and Off eF3 Key User can select the function for F3 Key Selectable Items Scan Mode Aspect Marker Enable L Y Zone Check Range Error Audio Level Meter Time Code Focus Assist BLUE ONLY DSLR Scale and Off eF4 Key User can select the function for F4 Key Selectable Items Scan Mode Aspect Marker Enable L Y Zone Check Range Error Audio Level Meter Time Code Focus Assist BLUE ONLY DSLR Scale and Off 6 Menu Operations SYSTEM RS 232 Type Upgrade HDMI To SDI off FPGA 0 MCU 0 1 e RS 232 Type Choose between Firmware Upgrade or Calibration with RS 232 USB terminal When Calibratio
20. ker H2 EBU Action 16 9 EBU Graphic 16 9 EBU Action 14 9 EBU Graphic 14 9 EBU Action 4 3 EBU Graphic 4 3 Fit Marker User Marker V1 1 640 Marker Mat u User Marken ua 1 640 12 Electronic Viewfinder 5 Menu Tree amp Adjustment WAVEFORM amp ERROR CHECK L Y Zone Check Level Meter L Y Zone Adjust Lv Meter Disp Range Error Lv Meter Ref Y Max Lv Meter Size Y Min Peak Decay Time C Max C Min Y Pic Blink C Pic Blink Off Waveform Waveform Vector Waveform Wide 1 Waveform Wide 2 WIF itensity W F Trans Electronic Viewfinder 13 5 Menu Tree amp Adjustment DISPLAY amp SET SYSTEM Upgrade System Default RSZ Mpe Calibration Back Light 0 100 HDMI To SDI er Off Int Pattern Color Pluge Gray 0 100 Off Time Code VITC LTC Off Focus Assist Mono On Color On Red F A Color Green Blue F A Level 0 100 F1 Ke y Scan Mode Aspect Marker Enable gd L Y Zone Check Range Error Audio Level Meter Time Code Focus Assist Blue Only F3 Key 14 Electronic Viewfinder 6 Menu O Brightness 0 Contrast 0 Chroma 0 Aperture 0 Scan Mode Over Aspect 16 9 3G Format Normal DSLR Camera CANON 5D 7D DSLR Scale Playback Rotary Lock Unlock e Brightness Used to set the brightness offset level from 100 to 100 e Contrast Used to set the contrast gain level from
21. lization and powerful features that requires no other accessories e Wide Screen Wide Viewing Angle e Rotary Control Easy to adjust user configuration using the Rotary control on the left side of the viewfinder e BLUE ONLY MONO Focus Assist H V Delay Function e Range Error Luma Y Zone Check Color Zebra Type Function e Internal Pattern Generator 0 100 Gray ColorBar Pluge e Markers amp Safety Areas Center Marker Safety Area Marker Aspect Marker Display Size Scan e HDMI SDI Active Loop Through out e Waveform amp Vectorscope Functions e Pixel To Pixel Zoom mode Used to display the original image resolution without scaling to match a certain resolution or an aspect ratio Select Pixel to pixel to display unscaled images and select Zoom to enlarge the original image Zoom Scroll Function Left Right Top Bottom e Power Basically the product is powered by normal DC source The product can be battery powered DC 6 8V 12V D tap to mini XLR connection e Additional features 3 Camera Mounting Holes Luminance of 500cd m Contrast Ratio of 1000 1 OSD user interface Electronic Viewfinder 7 4 Control amp Functions CAMERA MOUNT MAGNET SUN HOOD FOCUSING CONTROL F1 PART F4 F3 SHUTTER MENU lt EXIT gt WHEEL SOURCE e FOCUSING UP DOWN ENTER COVER 1 0 PORT
22. n is selected the screen is changed to white To return to normal screen mode choose upgrade mode e HDMI To SDI Select SDI output teminal Singal When it is ON HDMI input signal is output to SDI terminal When it is OFF SDI input signal is output to SDI terminal Avilable HDMI support signal formats are 480i p 576i p 720 50p 60p 1080 60p 50p 60i 50i 24 25 30p This function is not supported when HDCP Key embedded to HDMI signal to prevent illegal copying Tuned to the Off mode automatically e Displays FPGA MCU and Calibration information Electronic Viewfinder 21 7 Other Functions e EVF 035W 3G provides pixel count information using Pixel to Pixel mode Select Scan mode in the DISPLAY amp SET menu or set the Scan mode to function Key to activate the Pixel To Pixel mode e After activation of Pixel To Pixel mode use the Rotary Control to move the position before the message window disappears e If the message window disappears repositioning menu is not available Then activate the Pixel To Pixel mode again and adjust the position by using the Rotary Control e Available range H position 0 10 V potion 0 10 22 Electronic Viewfinder e The EVF 035W 3G can adjust the Scan Size in the User Scan Mode e Select User mode in the DISPLAY amp SET menu or set the Aspect to function Key to activate the User mode e After activation of User mode use the Rotary Control to mov
23. nd Cyan 41096 from Pink e L Y Zone Adj Luma Zone Adjust Used to set the Y level to be colored Yellow Pink and Cyan simply by scrolling the Rotary Control Available values are 0 100 18 Electronic Viewfinder eRange Error Used to set whether or not to activate Y MAX Y MIN C MAX C MIN Y PICTURE BLINK and C PICTURE BLINK functions The values of Y MAX Y MIN C MAX C MIN are indicated in WaveForm VECTOR If Y PICTURE BLINK or C PICTURE BLINK is enabled the section of image that exceeds the selected values of Y MAX Y MIN C MAX and C MIN shall blink See section 6 Other Function 5 Range Error for more information Y Max Used to set the maximum luma Y level from Oto 255 Pixels with values exceeding the max Y level will blink in the screen e Y Min Used to set the minimum luma Y level from Oto 255 Pixels with values exceeding the min Y level will blink in the screen eC Max Used to set the maximum chroma C level from 0 to 255 Pixels with values exceeding the max C level will blink in the screen eC Min Used to set the minimum chroma C level from 0 to 255 Pixels with values exceeding the min C level will blink in the screen eY Picture Blink Used to set whether or not to blink pixels with values exceeding Y MAX and Y MIN eC Picture Blink Used to set whether or not to blink pixels with values exceeding C MAX and C MIN 6
24. ontrol to select a menu and move to select a sub menu by rotating the Rotary Control Press the Rotary Control to select the desired sub menu The selected sub menu will be highlighted Press ENTER button or MENU button to save the new value after adjusting the value by rotating the Rotary Control 6 Press MENU button to return to previous menu and if there is no previous menu the OSD menu will be removed from the screen w A Un 5 Menu Tree amp Adjustment PICTURE COLOR Brightness 100 100 Color Temp Contrast 100 100 Chroma 50 50 128 127 Aperture Sharpness 25 25 128 127 Zero 128 127 Scan Mode Over Pixel To Pixel Bias Red 128 127 User 16 9 4 3 2 354 1 85 1 Bias Green 128 127 15 9 16 10 Auto Normal A444 10B_YCbCr A444 10B_RGB A444 12B_YCbCr A444 12B RGB Bias Blue 128 127 A422 12B_YCbCr B444 10 12B_YCbCr B444 10 12B_RGB B444 12B YCbCr B444 10B_YCbCr P CADNON 5D 7D SONY A77 DSLR Camera NIKON D7000 NIKON D4 D800 Color Copy Playback DSLR Scale Live REC Full Live REC 16 9 Unlock Rotary Lock Lock Electronic Viewfinder 11 5 Menu Tree amp Adjustment Marker Enable Marker Color Off 16 9 4 3 4 3 ON AIR 15 9 Marker Type 14 9 Marker Thickness 13 9 1 85 1 2 35 1 1 85 1 amp 4 3 User Center Marker User Marker H1 Off 80 85 88 90 93 Safety Area 100 User Mar
25. tive Loop Through Out 1 485Gbps Input Signal 480i 480p 720p 1080i 8 VESA IBM Modes END 1080p 60 59 94 50 30 29 97 25 24 23 98 30sF 29 97sF 25sF 24sF 23 98sF SMPTE 425M A B 1980i 60 59 94 50 1080i 60 59 94 50 SMPTE 274M minena 1080p 30 29 97 25 24 24sF 23 98 23 98sF Formats 720p 60 59 94 50 1035i 60 59 94 480i 59 94 576i 50 DC 6 8 12V 9 6Watts Typ OC to 40 C 32 F to 104 F 20 C to 60 C 4 F to 140 F 111 39 x 83 34 x 213 08 4 38 X 3 28 X 8 39 285 X 155 X 124 11 22 X 6 10 X 4 88 Net Weight 460g 1 01 05 Gross Weight 840g 5 Manual D Tap Cable Camera Mount Support x2 Adaptor Power Cord US UK EU o D tap to mini XLR connection The specification above may be changed without notice Electronic Viewfinder 27 9 Warranty Registration ALPHATRON Alphatron Broadcast Electronics Registration Warranty Dear User You became the owner of the Alphatron Electronic View Finder EVF 035W 3G We advise you to register your EVF 035W 3G before using Direct registration at www evf tv registration will give you the advantage to professional assistance through authorized Technical Service Providers Please keep this warranty card in a safe place together with your purchase invoice You will receive a confirmation e mail of your registration Producttype EVF 035W 3G Serial No 28 Electronic Viewfinder Electronic Viewfinder 29 30 Electronic Viewfinder ALPHAT RON
26. ture reference All warnings on the product and in the instructions must be observed closely e All operating instructions must be followed e Do not use attachments not recommended by the manufacturer Use of inadequate attachments can result in accidents e This product must be operated on a power source specified on the specification label e If you are not sure of the type of power supply used in your home consult your dealer or local power company For units designed to operate on batteries or another power source refer to the operating instructions e The power cords must be routed properly to prevent people from stepping on them or objects from resting on them Check the cords atthe plugs and product e In case of using other DC adapters instead ofthe standard adapter provided by the manufacturer please check the proper load capacity or current capacity and use an adapter with stable voltage e Do not overload DC outlets or extension cords Overloading can cause or electric shock e Never insert an object into the product through vents or openings High voltage in the product and inserting an object can cause electric shock and or short internal parts For the same reason do not spill water or liquid on the product e Do not attempt to service the product yourself Removing covers can expose you to high voltage and other dangerous conditions Request a qualified service person to perform servicing 4 El
Download Pdf Manuals
Related Search